ARM: 64-bit DT updates for v4.8

Just as the 32-bit contents, the 64-bit device tree branch also contains
 a number of additions this release cycle.
 
 New platforms:
  - LG LG1313
  - Mediatek MT6755
  - Renesas r8a7796
  - Broadcom 2837
 
  Other platforms with larger updates are:
  - Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
  - Mediatek MT8173 (display subsystem added)
  - Rockchip RK3399 (a lot of new peripherals)
  - ARM Juno reference implementation (SCPI power domains, coresight, thermal)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnnlFAAoJEIwa5zzehBx3vvQQAJRlQ8JtQYzPyyiBGn/F8rbr
 JFf2clMobYwPBQGFHQOC2WGEAZEhTMcc0exzfLp4Iu+9wsZW28KQCZvZHk3Gn60/
 U/e9/V3xFlCFudgOPoxrUzil1XWG6hxI6PMetn2+WwBa3PziZQczXiJu1iWWP1HE
 XSusuE9SL7w0EfBDtJcbdZPQC2Ciq3mzBB7wLEE0Dblz4WgZuE74wWMVpjtb9bhV
 sWtveX45J/UwzUkeIrErwhSzDRCD4D/Vw6p/1gcmCQfY+LFsLs6/QUJbglThyhSJ
 xo72jc6W2Y+FvX4XgFgjofS57mgfdwgmCSY0OhA7FRCWxbRllkzQrgE5JmPAP0J8
 SwfhNe7uH0onuSmiaaTPdcVy6lx572keN6LWjxdW08/qSsDY+TxdxG/zVP3C0lcZ
 Al5NgwP9oViUpSOLkzwmlZvva+8WBLzDLQjMfduX/JsTUubJSVht+34XS2o7uE9D
 15HkqdHX7tQ6GOcOoERr2bKVGkG2MKxMgFcwmILPOARcqKAbxJ/Sq97axJ3Hqdzg
 GLcPV3YKgQ005vhJfswUN1jjKQbjvOY+aAhCekfs/xMyJz+K9IzkRPxKuVDt/1Tg
 J6X5yqk12yRiCvfpHUeFs3LTHLsocX3dM8wevkEacNdEZ7hXyhBzkAgZKjt7ujJ/
 NQtezrdMW/ZRNq7CoS4z
 =g0hR
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull 64-bit ARM DT updates from Olof Johansson:
 "Just as the 32-bit contents, the 64-bit device tree branch also
  contains a number of additions this release cycle.

  New platforms:
   - LG LG1313
   - Mediatek MT6755
   - Renesas r8a7796
   - Broadcom 2837

  Other platforms with larger updates are:
   - Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
   - Mediatek MT8173 (display subsystem added)
   - Rockchip RK3399 (a lot of new peripherals)
   - ARM Juno reference implementation (SCPI power domains, coresight,
     thermal)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  arm64: tegra: Enable HDMI on Jetson TX1
  arm64: tegra: Add sor1_src clock
  arm64: tegra: Add XUSB powergates on Tegra210
  arm64: tegra: Add DPAUX pinctrl bindings
  arm64: tegra: Add ACONNECT bus node for Tegra210
  arm64: tegra: Add audio powergate node for Tegra210
  arm64: tegra: Add regulators for Tegra210 Smaug
  arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
  arm64: tegra: Enable XUSB controller on Jetson TX1
  arm64: tegra: Enable debug serial on Jetson TX1
  arm64: tegra: Add Tegra210 XUSB controller
  arm64: tegra: Add Tegra210 XUSB pad controller
  arm64: tegra: Add DSI panel on Jetson TX1
  arm64: tegra: p2597: Add SDMMC power supplies
  arm64: tegra: Add PMIC support on Jetson TX1
  Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock"
  arm64: dts: hi6220: Add pl031 RTC support
  arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  arm64: dts: r8a7796: Add RWDT node
  arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
  ...

Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
 Required root node properties:
 compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
 
+Raspberry Pi 3 Model B
+Required root node properties:
+compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+
 Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";

Documentation/devicetree/bindings/arm/mediatek.txt

@@ -10,6 +10,7 @@ compatible: Must contain one of
    "mediatek,mt6580"
    "mediatek,mt6589"
    "mediatek,mt6592"
+   "mediatek,mt6755"
    "mediatek,mt6795"
    "mediatek,mt7623"
    "mediatek,mt8127"
@@ -31,6 +32,9 @@ Supported boards:
 - Evaluation board for MT6592:
     Required root node properties:
       - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- Evaluation phone for MT6755(Helio P10):
+    Required root node properties:
+      - compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
 - Evaluation board for MT6795(Helio X10):
     Required root node properties:
       - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -29,6 +29,8 @@ SoCs:
     compatible = "renesas,r8a7794"
   - R-Car H3 (R8A77950)
     compatible = "renesas,r8a7795"
+  - R-Car M3-W (R8A77960)
+    compatible = "renesas,r8a7796"
 
 
 Boards:
@@ -63,5 +65,7 @@ Boards:
     compatible = "renesas,porter", "renesas,r8a7791"
   - Salvator-X (RTP0RC7795SIPB0010S)
     compatible = "renesas,salvator-x", "renesas,r8a7795";
+  - Salvator-X
+    compatible = "renesas,salvator-x", "renesas,r8a7796";
   - SILK (RTP0RC7794LCB00011S)
     compatible = "renesas,silk", "renesas,r8a7794"

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -10,6 +10,7 @@ PHYs.
 Required properties:
 - compatible        : compatible string, one of:
   - "allwinner,sun4i-a10-ahci"
+  - "brcm,iproc-ahci"
   - "hisilicon,hisi-ahci"
   - "cavium,octeon-7130-ahci"
   - "ibm,476gtr-ahci"

Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt

@@ -9,6 +9,7 @@ Required properties:
 	"mediatek,mt8135-sysirq"
 	"mediatek,mt8127-sysirq"
 	"mediatek,mt6795-sysirq"
+	"mediatek,mt6755-sysirq"
 	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"

Documentation/devicetree/bindings/net/apm-xgene-enet.txt

@@ -59,8 +59,8 @@ Example:
 		compatible = "apm,xgene-enet";
 		status = "disabled";
 		reg = <0x0 0x17020000 0x0 0xd100>,
-		      <0x0 0X17030000 0x0 0X400>,
+		      <0x0 0x17030000 0x0 0x400>,
-		      <0x0 0X10000000 0x0 0X200>;
+		      <0x0 0x10000000 0x0 0x200>;
 		reg-names = "enet_csr", "ring_csr", "ring_cmd";
 		interrupts = <0x0 0x3c 0x4>;
 		port-id = <0>;

Documentation/devicetree/bindings/pci/layerscape-pci.txt

@@ -24,6 +24,9 @@ Required properties:
   The first entry must be a link to the SCFG device node
   The second entry must be '0' or '1' based on physical PCIe controller index.
   This is used to get SCFG PEXN registers
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
 
 Example:
 
@@ -38,6 +41,7 @@ Example:
 		#address-cells = <3>;
 		#size-cells = <2>;
 		device_type = "pci";
+		dma-coherent;
 		num-lanes = <4>;
 		bus-range = <0x0 0xff>;
 		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */

Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt

@@ -5,6 +5,8 @@ Required properties for the root node:
 		      "amlogic,meson8b-cbus-pinctrl"
 		      "amlogic,meson8-aobus-pinctrl"
 		      "amlogic,meson8b-aobus-pinctrl"
+		      "amlogic,meson-gxbb-periphs-pinctrl"
+		      "amlogic,meson-gxbb-aobus-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===

Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt

@@ -0,0 +1,14 @@
+Amlogic Meson Random number generator
+=====================================
+
+Required properties:
+
+- compatible : should be "amlogic,meson-rng"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+rng {
+        compatible = "amlogic,meson-rng";
+        reg = <0x0 0xc8834000 0x0 0x4>;
+};

Documentation/devicetree/bindings/serial/mtk-uart.txt

@@ -6,6 +6,7 @@ Required properties:
   * "mediatek,mt6580-uart" for MT6580 compatible UARTS
   * "mediatek,mt6582-uart" for MT6582 compatible UARTS
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+  * "mediatek,mt6755-uart" for MT6755 compatible UARTS
   * "mediatek,mt6795-uart" for MT6795 compatible UARTS
   * "mediatek,mt7623-uart" for MT7623 compatible UARTS
   * "mediatek,mt8127-uart" for MT8127 compatible UARTS

arch/arm64/Kconfig.platforms

@@ -140,6 +140,12 @@ config ARCH_R8A7795
 	help
 	  This enables support for the Renesas R-Car H3 SoC.
 
+config ARCH_R8A7796
+	bool "Renesas R-Car M3-W SoC Platform"
+	depends on ARCH_RENESAS
+	help
+	  This enables support for the Renesas R-Car M3-W SoC.
+
 config ARCH_STRATIX10
 	bool "Altera's Stratix 10 SoCFPGA Family"
 	help

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -45,6 +45,7 @@
 /dts-v1/;
 
 #include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
@@ -62,8 +63,27 @@ memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c2:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
 };
 
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -62,4 +62,13 @@ memory@0 {
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -56,4 +56,7 @@ chosen {
 
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+
 };

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -43,6 +43,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
@@ -129,13 +131,35 @@ cbus: cbus@c1100000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x20>;
+				#reset-cells = <1>;
+			};
+
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x084c0 0x0 0x14>;
+				reg = <0x0 0x84c0 0x0 0x14>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84dc 0x0 0x14>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x8700 0x0 0x14>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@c4301000 {
@@ -158,6 +182,29 @@ aobus: aobus@c8100000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+					      <0x0 0x0002c 0x0 0x4>,
+					      <0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				uart_ao_a_pins: uart_ao_a {
+					mux {
+						groups = "uart_tx_ao_a", "uart_rx_ao_a";
+						function = "uart_ao";
+					};
+				};
+			};
+
 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x004c0 0x0 0x14>;
@@ -167,6 +214,115 @@ uart_AO: serial@4c0 {
 			};
 		};
 
+		periphs: periphs@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			rng {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+
+			pinctrl_periphs: pinctrl@4b0 {
+				compatible = "amlogic,meson-gxbb-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4b0 {
+					reg = <0x0 0x004b0 0x0 0x28>,
+					      <0x0 0x004e8 0x0 0x14>,
+					      <0x0 0x00120 0x0 0x14>,
+					      <0x0 0x00430 0x0 0x40>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				emmc_pins: emmc {
+					mux {
+						groups = "emmc_nand_d07",
+						       "emmc_cmd",
+						       "emmc_clk";
+						function = "emmc";
+					};
+				};
+
+				sdcard_pins: sdcard {
+					mux {
+						groups = "sdcard_d0",
+						       "sdcard_d1",
+						       "sdcard_d2",
+						       "sdcard_d3",
+						       "sdcard_cmd",
+						       "sdcard_clk";
+						function = "sdcard";
+					};
+				};
+
+				uart_a_pins: uart_a {
+					mux {
+						groups = "uart_tx_a",
+						       "uart_rx_a";
+						function = "uart_a";
+					};
+				};
+
+				uart_b_pins: uart_b {
+					mux {
+						groups = "uart_tx_b",
+						       "uart_rx_b";
+						function = "uart_b";
+					};
+				};
+
+				uart_c_pins: uart_c {
+					mux {
+						groups = "uart_tx_c",
+						       "uart_rx_c";
+						function = "uart_c";
+					};
+				};
+
+				eth_pins: eth_c {
+					mux {
+						groups = "eth_mdio",
+						       "eth_mdc",
+						       "eth_clk_rx_clk",
+						       "eth_rx_dv",
+						       "eth_rxd0",
+						       "eth_rxd1",
+						       "eth_rxd2",
+						       "eth_rxd3",
+						       "eth_rgmii_tx_clk",
+						       "eth_tx_en",
+						       "eth_txd0",
+						       "eth_txd1",
+						       "eth_txd2",
+						       "eth_txd3";
+						function = "eth";
+					};
+				};
+			};
+		};
+
+		hiubus: hiubus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			clkc: clock-controller@0 {
+				compatible = "amlogic,gxbb-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x3db>;
+			};
+		};
+
 		apb: apb@d0000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xd0000000 0x0 0x200000>;
@@ -174,5 +330,17 @@ apb: apb@d0000000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			clocks = <&xtal>;
+			clock-names = "stmmaceth";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
 	};
 };

arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

@@ -106,88 +106,88 @@ gic: interrupt-controller@78090000 {
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 		ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
 		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
-		      <0x0 0x780A0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780a0000 0x0 0x20000>,	/* GIC CPU */
-		      <0x0 0x780C0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780c0000 0x0 0x10000>,	/* GIC VCPU Control */
-		      <0x0 0x780E0000 0x0 0x20000>;	/* GIC VCPU */
+		      <0x0 0x780e0000 0x0 0x20000>;	/* GIC VCPU */
-		v2m0: v2m@0x00000 {
+		v2m0: v2m@00000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x0 0x0 0x1000>;
 		};
-		v2m1: v2m@0x10000 {
+		v2m1: v2m@10000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x10000 0x0 0x1000>;
 		};
-		v2m2: v2m@0x20000 {
+		v2m2: v2m@20000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x20000 0x0 0x1000>;
 		};
-		v2m3: v2m@0x30000 {
+		v2m3: v2m@30000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x30000 0x0 0x1000>;
 		};
-		v2m4: v2m@0x40000 {
+		v2m4: v2m@40000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x40000 0x0 0x1000>;
 		};
-		v2m5: v2m@0x50000 {
+		v2m5: v2m@50000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x50000 0x0 0x1000>;
 		};
-		v2m6: v2m@0x60000 {
+		v2m6: v2m@60000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x60000 0x0 0x1000>;
 		};
-		v2m7: v2m@0x70000 {
+		v2m7: v2m@70000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x70000 0x0 0x1000>;
 		};
-		v2m8: v2m@0x80000 {
+		v2m8: v2m@80000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x80000 0x0 0x1000>;
 		};
-		v2m9: v2m@0x90000 {
+		v2m9: v2m@90000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x90000 0x0 0x1000>;
 		};
-		v2m10: v2m@0xA0000 {
+		v2m10: v2m@a0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xA0000 0x0 0x1000>;
+			reg = <0x0 0xa0000 0x0 0x1000>;
 		};
-		v2m11: v2m@0xB0000 {
+		v2m11: v2m@b0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xB0000 0x0 0x1000>;
+			reg = <0x0 0xb0000 0x0 0x1000>;
 		};
-		v2m12: v2m@0xC0000 {
+		v2m12: v2m@c0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xC0000 0x0 0x1000>;
+			reg = <0x0 0xc0000 0x0 0x1000>;
 		};
-		v2m13: v2m@0xD0000 {
+		v2m13: v2m@d0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xD0000 0x0 0x1000>;
+			reg = <0x0 0xd0000 0x0 0x1000>;
 		};
-		v2m14: v2m@0xE0000 {
+		v2m14: v2m@e0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xE0000 0x0 0x1000>;
+			reg = <0x0 0xe0000 0x0 0x1000>;
 		};
-		v2m15: v2m@0xF0000 {
+		v2m15: v2m@f0000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
-			reg = <0x0 0xF0000 0x0 0x1000>;
+			reg = <0x0 0xf0000 0x0 0x1000>;
 		};
 	};
 
@@ -198,10 +198,10 @@ pmu {
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff04>,	/* Secure Phys IRQ */
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
-			     <1 13 0xff04>,	/* Non-secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff04>,	/* Virt IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
-			     <1 15 0xff04>;	/* Hyp IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
 		clock-frequency = <50000000>;
 	};
 
@@ -637,8 +637,8 @@ sgenet0: ethernet@1f610000 {
 			compatible = "apm,xgene2-sgenet";
 			status = "disabled";
 			reg = <0x0 0x1f610000 0x0 0xd100>,
-			      <0x0 0x1f600000 0x0 0Xd100>,
+			      <0x0 0x1f600000 0x0 0xd100>,
-			      <0x0 0x20000000 0x0 0X20000>;
+			      <0x0 0x20000000 0x0 0x20000>;
 			interrupts = <0 96 4>,
 				     <0 97 4>;
 			dma-coherent;
@@ -652,8 +652,8 @@ xgenet1: ethernet@1f620000 {
 			compatible = "apm,xgene2-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f620000 0x0 0x10000>,
-			      <0x0 0x1f600000 0x0 0Xd100>,
+			      <0x0 0x1f600000 0x0 0xd100>,
-			      <0x0 0x20000000 0x0 0X220000>;
+			      <0x0 0x20000000 0x0 0x220000>;
 			interrupts = <0 108 4>,
 				     <0 109 4>,
 				     <0 110 4>,
@@ -693,7 +693,7 @@ i2c4: i2c@10640000 {
 			#size-cells = <0>;
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10640000 0x0 0x1000>;
-			interrupts = <0 0x3A 0x4>;
+			interrupts = <0 0x3a 0x4>;
 			clocks = <&i2c4clk 0>;
 			bus_num = <4>;
 		};

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -199,16 +199,6 @@ sdioclk: sdioclk@1f2ac000 {
 				clock-output-names = "sdioclk";
 			};
 
-			qmlclk: qmlclk {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				clock-names = "qmlclk";
-				reg = <0x0 0x1703C000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "qmlclk";
-			};
-
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -226,7 +216,7 @@ menetclk: menetclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
 				clocks = <&ethclk 0>;
-				reg = <0x0 0x1702C000 0x0 0x1000>;
+				reg = <0x0 0x1702c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "menetclk";
 			};
@@ -924,8 +914,8 @@ menet: ethernet@17020000 {
 			compatible = "apm,xgene-enet";
 			status = "disabled";
 			reg = <0x0 0x17020000 0x0 0xd100>,
-			      <0x0 0X17030000 0x0 0Xc300>,
+			      <0x0 0x17030000 0x0 0xc300>,
-			      <0x0 0X10000000 0x0 0X200>;
+			      <0x0 0x10000000 0x0 0x200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x3c 0x4>;
 			dma-coherent;
@@ -950,11 +940,11 @@ sgenet0: ethernet@1f210000 {
 			compatible = "apm,xgene1-sgenet";
 			status = "disabled";
 			reg = <0x0 0x1f210000 0x0 0xd100>,
-			      <0x0 0x1f200000 0x0 0Xc300>,
+			      <0x0 0x1f200000 0x0 0xc300>,
-			      <0x0 0x1B000000 0x0 0X200>;
+			      <0x0 0x1b000000 0x0 0x200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0xA0 0x4>,
+			interrupts = <0x0 0xa0 0x4>,
-				     <0x0 0xA1 0x4>;
+				     <0x0 0xa1 0x4>;
 			dma-coherent;
 			clocks = <&sge0clk 0>;
 			local-mac-address = [00 00 00 00 00 00];
@@ -966,11 +956,11 @@ sgenet1: ethernet@1f210030 {
 			compatible = "apm,xgene1-sgenet";
 			status = "disabled";
 			reg = <0x0 0x1f210030 0x0 0xd100>,
-			      <0x0 0x1f200000 0x0 0Xc300>,
+			      <0x0 0x1f200000 0x0 0xc300>,
-			      <0x0 0x1B000000 0x0 0X8000>;
+			      <0x0 0x1b000000 0x0 0x8000>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0xAC 0x4>,
+			interrupts = <0x0 0xac 0x4>,
-				     <0x0 0xAD 0x4>;
+				     <0x0 0xad 0x4>;
 			port-id = <1>;
 			dma-coherent;
 			local-mac-address = [00 00 00 00 00 00];
@@ -982,8 +972,8 @@ xgenet: ethernet@1f610000 {
 			compatible = "apm,xgene1-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f610000 0x0 0xd100>,
-			      <0x0 0x1f600000 0x0 0Xc300>,
+			      <0x0 0x1f600000 0x0 0xc300>,
-			      <0x0 0x18000000 0x0 0X200>;
+			      <0x0 0x18000000 0x0 0x200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x60 0x4>,
 				     <0x0 0x61 0x4>,
@@ -1005,11 +995,11 @@ xgenet1: ethernet@1f620000 {
 			compatible = "apm,xgene1-xgenet";
 			status = "disabled";
 			reg = <0x0 0x1f620000 0x0 0xd100>,
-			      <0x0 0x1f600000 0x0 0Xc300>,
+			      <0x0 0x1f600000 0x0 0xc300>,
-			      <0x0 0x18000000 0x0 0X8000>;
+			      <0x0 0x18000000 0x0 0x8000>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0x6C 0x4>,
+			interrupts = <0x0 0x6c 0x4>,
-				     <0x0 0x6D 0x4>;
+				     <0x0 0x6d 0x4>;
 			port-id = <1>;
 			dma-coherent;
 			clocks = <&xge1clk 0>;

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -56,6 +56,315 @@ timer {
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	/*
+	 * Juno TRMs specify the size for these coresight components as 64K.
+	 * The actual size is just 4K though 64K is reserved. Access to the
+	 * unmapped reserved region results in a DECERR response.
+	 */
+	etf@20010000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* input port */
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&main_funnel_out_port>;
+				};
+			};
+
+			/* output port */
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	main-funnel@20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				main_funnel_out_port: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				main_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster0_funnel_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				main_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_funnel_out_port>;
+				};
+			};
+
+		};
+	};
+
+	etr@20070000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20070000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	etm0: etm@22040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster0_etm0_out_port: endpoint {
+				remote-endpoint = <&cluster0_funnel_in_port0>;
+			};
+		};
+	};
+
+	cluster0-funnel@220c0000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x220c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster0_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				cluster0_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster0_etm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				cluster0_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster0_etm1_out_port>;
+				};
+			};
+		};
+	};
+
+	etm1: etm@22140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster0_etm1_out_port: endpoint {
+				remote-endpoint = <&cluster0_funnel_in_port1>;
+			};
+		};
+	};
+
+	etm2: etm@23040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm0_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port0>;
+			};
+		};
+	};
+
+	cluster1-funnel@230c0000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x230c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster1_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port1>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				cluster1_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				cluster1_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm1_out_port>;
+				};
+			};
+			port@3 {
+				reg = <2>;
+				cluster1_funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm2_out_port>;
+				};
+			};
+			port@4 {
+				reg = <3>;
+				cluster1_funnel_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&cluster1_etm3_out_port>;
+				};
+			};
+		};
+	};
+
+	etm3: etm@23140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm1_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port1>;
+			};
+		};
+	};
+
+	etm4: etm@23240000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23240000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm2_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port2>;
+			};
+		};
+	};
+
+	etm5: etm@23340000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23340000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		port {
+			cluster1_etm3_out_port: endpoint {
+				remote-endpoint = <&cluster1_funnel_in_port3>;
+			};
+		};
+	};
+
+	coresight-replicator {
+		/*
+		 * Non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
 	sram: sram@2e000000 {
 		compatible = "arm,juno-sram-ns", "mmio-sram";
 		reg = <0x0 0x2e000000 0x0 0x8000>;
@@ -119,12 +428,60 @@ scpi_clk: scpi-clk {
 			};
 		};
 
+		scpi_devpd: scpi-power-domains {
+			compatible = "arm,scpi-power-domains";
+			num-domains = <2>;
+			#power-domain-cells = <1>;
+		};
+
 		scpi_sensors0: sensors {
 			compatible = "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};
 
+	thermal-zones {
+		pmic {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 0>;
+		};
+
+		soc {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 3>;
+		};
+
+		big_cluster_thermal_zone: big_cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 21>;
+			status = "disabled";
+		};
+
+		little_cluster_thermal_zone: little_cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 22>;
+			status = "disabled";
+		};
+
+		gpu0_thermal_zone: gpu0 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 23>;
+			status = "disabled";
+		};
+
+		gpu1_thermal_zone: gpu1 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 24>;
+			status = "disabled";
+		};
+	};
+
 	/include/ "juno-clocks.dtsi"
 
 	dma@7ff00000 {

arch/arm64/boot/dts/arm/juno-r1.dts

@@ -181,3 +181,43 @@ &memtimer {
 &pcie_ctlr {
 	status = "okay";
 };
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};

arch/arm64/boot/dts/arm/juno-r2.dts

@@ -181,3 +181,43 @@ &memtimer {
 &pcie_ctlr {
 	status = "okay";
 };
+
+&etm0 {
+	cpu = <&A72_0>;
+};
+
+&etm1 {
+	cpu = <&A72_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};

arch/arm64/boot/dts/arm/juno.dts

@@ -173,3 +173,27 @@ pmu_a53 {
 
 	#include "juno-base.dtsi"
 };
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};

arch/arm64/boot/dts/broadcom/Makefile

@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
 dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
 

arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts

@@ -0,0 +1,30 @@
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "../../../../arm/boot/dts/bcm2835-rpi.dtsi"
+#include "../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};

arch/arm64/boot/dts/broadcom/bcm2837.dtsi

@@ -0,0 +1,76 @@
+#include "../../../../arm/boot/dts/bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0>, // PHYS_SECURE_PPI
+			     <1>, // PHYS_NONSECURE_PPI
+			     <3>, // VIRT_PPI
+			     <2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};

arch/arm64/boot/dts/broadcom/ns2-svk.dts

@@ -40,10 +40,14 @@ / {
 
 	aliases {
 		serial0 = &uart3;
+		serial1 = &uart0;
+		serial2 = &uart1;
+		serial3 = &uart2;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
 	memory {
@@ -76,6 +80,18 @@ &i2c1 {
 	status = "ok";
 };
 
+&uart0 {
+	status = "ok";
+};
+
+&uart1 {
+	status = "ok";
+};
+
+&uart2 {
+	status = "ok";
+};
+
 &uart3 {
 	status = "ok";
 };
@@ -125,6 +141,18 @@ at25@0 {
 	};
 };
 
+&sata_phy0 {
+	status = "ok";
+};
+
+&sata_phy1 {
+	status = "ok";
+};
+
+&sata {
+	status = "ok";
+};
+
 &sdio0 {
 	status = "ok";
 };
@@ -148,3 +176,12 @@ gphy0: eth-phy@10 {
 		};
 	};
 };
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -251,6 +251,22 @@ smmu: mmu@64000000 {
 			mmu-masters;
 		};
 
+		pinctrl: pinctrl@6501d130 {
+			compatible = "brcm,ns2-pinmux";
+			reg = <0x6501d130 0x08>,
+			      <0x660a0028 0x04>,
+			      <0x660009b0 0x40>;
+		};
+
+		gpio_aon: gpio@65024800 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x65024800 0x50>,
+			      <0x65024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
 		gic: interrupt-controller@65210000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -263,6 +279,26 @@ gic: interrupt-controller@65210000 {
 				      IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		cci@65590000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x65590000 0x1000>;
+			ranges = <0 0x65590000 0x10000>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1",
+					     "arm,cci-400-pmu";
+				reg = <0x9000 0x4000>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		mdio_mux_iproc: mdio-mux@6602023c {
 			compatible = "brcm,mdio-mux-iproc";
 			reg = <0x6602023c 0x14>;
@@ -360,6 +396,16 @@ wdt0: watchdog@66090000 {
 			clock-names = "wdogclk", "apb_pclk";
 		};
 
+		gpio_g: gpio@660a0000 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x660a0000 0x50>;
+			ngpios = <32>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		i2c1: i2c@660b0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x660b0000 0x100>;
@@ -370,6 +416,36 @@ i2c1: i2c@660b0000 {
 			status = "disabled";
 		};
 
+		uart0: serial@66100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66100000 0x100>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@66110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66110000 0x100>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@66120000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66120000 0x100>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
 		uart3: serial@66130000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x66130000 0x100>;
@@ -407,6 +483,49 @@ hwrng: hwrng@66220000 {
 			reg = <0x66220000 0x28>;
 		};
 
+		sata_phy: sata_phy@663f0100 {
+			compatible = "brcm,iproc-ns2-sata-phy";
+			reg = <0x663f0100 0x1f00>,
+			      <0x663f004c 0x10>;
+			reg-names = "phy", "phy-ctrl";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: ahci@663f2000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x663f2000 0x1000>;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
 		sdio0: sdhci@66420000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66420000 0x100>;

arch/arm64/boot/dts/exynos/exynos7-espresso.dts

@@ -249,7 +249,7 @@ buck1_reg: BUCK1 {
 
 			buck2_reg: BUCK2 {
 				regulator-name = "vdd_atlas";
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -51,7 +51,7 @@ / {
 	#size-cells = <2>;
 
 	cpus {
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		/*
@@ -63,29 +63,37 @@ cpus {
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
+			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
+			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
+			reg = <0x2>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
+			reg = <0x3>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
 		};
 	};
 
@@ -465,6 +473,7 @@ usb0: usb3@2f00000 {
 			interrupts = <0 60 0x4>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb3@3000000 {
@@ -473,6 +482,7 @@ usb1: usb3@3000000 {
 			interrupts = <0 61 0x4>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb2: usb3@3100000 {
@@ -481,6 +491,7 @@ usb2: usb3@3100000 {
 			interrupts = <0 63 0x4>;
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		sata: sata@3200000 {
@@ -522,6 +533,7 @@ pcie@3400000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -546,6 +558,7 @@ pcie@3500000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <2>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -570,6 +583,7 @@ pcie@3600000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <2>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

@@ -51,7 +51,7 @@ / {
 	#size-cells = <2>;
 
 	cpus {
-		#address-cells = <2>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		/*
@@ -65,57 +65,81 @@ cpus {
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
+			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x1>;
+			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
+			next-level-cache = <&cluster0_l2>;
 		};
 
 		cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x100>;
+			reg = <0x100>;
 			clocks = <&clockgen 1 1>;
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
+			reg = <0x101>;
 			clocks = <&clockgen 1 1>;
+			next-level-cache = <&cluster1_l2>;
 		};
 
 		cpu@200 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x200>;
+			reg = <0x200>;
 			clocks = <&clockgen 1 2>;
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu@201 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x201>;
+			reg = <0x201>;
 			clocks = <&clockgen 1 2>;
+			next-level-cache = <&cluster2_l2>;
 		};
 
 		cpu@300 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x300>;
+			reg = <0x300>;
 			clocks = <&clockgen 1 3>;
+			next-level-cache = <&cluster3_l2>;
 		};
 
 		cpu@301 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x301>;
+			reg = <0x301>;
 			clocks = <&clockgen 1 3>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
 		};
 	};
 
@@ -672,6 +696,7 @@ usb0: usb3@3100000 {
 			interrupts = <0 80 0x4>; /* Level high type */
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		usb1: usb3@3110000 {
@@ -681,6 +706,7 @@ usb1: usb3@3110000 {
 			interrupts = <0 81 0x4>; /* Level high type */
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
 		};
 
 		ccn@4000000 {

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -66,6 +66,149 @@ uart3: uart@f7113000 {
 			status = "ok";
 		};
 
+		/*
+		 * Legend: proper name = the GPIO line is used as GPIO
+		 *         NC = not connected (not routed from the SoC)
+		 *         "[PER]" = pin is muxed for peripheral (not GPIO)
+		 *         "" = no idea, schematic doesn't say, could be
+		 *              unrouted (not connected to any external pin)
+		 *         LSEC = Low Speed External Connector
+		 *         HSEC = High Speed External Connector
+		 *
+		 * Pin assignments taken from LeMaker and CircuitCo Schematics
+		 * Rev A1.
+		 *
+		 * For the lines routed to the external connectors the
+		 * lines are named after the 96Boards CE Specification 1.0,
+		 * Appendix "Expansion Connector Signal Description".
+		 *
+		 * When the 96Board naming of a line and the schematic name of
+		 * the same line are in conflict, the 96Board specification
+		 * takes precedence, which means that the external UART on the
+		 * LSEC is named UART0 while the schematic and SoC names this
+		 * UART2. This is only for the informational lines i.e. "[FOO]",
+		 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+		 * ones actually used for GPIO.
+		 */
+		gpio0: gpio@f8011000 {
+			gpio-line-names = "PWR_HOLD", "DSI_SEL",
+			"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
+			"PWRON_DET", "5V_HUB_EN";
+		};
+
+		gpio1: gpio@f8012000 {
+			gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
+			"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
+		};
+
+		gpio2: gpio@f8013000 {
+			gpio-line-names =
+				"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
+				"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
+				"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
+				"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
+				"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
+				"USB_ID_DET", "USB_VBUS_DET",
+				"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
+		};
+
+		gpio3: gpio@f8014000 {
+			gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
+			"WLAN_ACTIVE", "NC", "NC";
+		};
+
+		gpio4: gpio@f7020000 {
+			gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
+			"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
+		};
+
+		gpio5: gpio@f7021000 {
+			gpio-line-names = "NC", "NC",
+			"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
+			"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
+			"[AUX_SSI1]", "NC",
+			"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
+			"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
+		};
+
+		gpio6: gpio@f7022000 {
+			gpio-line-names =
+			"[SPI0_DIN]", /* Pin 10: SPI0_DI */
+			"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
+			"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
+			"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
+			"NC", "NC", "NC",
+			"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
+		};
+
+		gpio7: gpio@f7023000 {
+			gpio-line-names = "NC", "NC", "NC", "NC",
+			"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
+			"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
+			"NC", "NC";
+		};
+
+		gpio8: gpio@f7024000 {
+			gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
+			"", "", "", "", "", "";
+		};
+
+		gpio9: gpio@f7025000 {
+			gpio-line-names = "",
+			"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
+			"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
+			"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
+		};
+
+		gpio10: gpio@f7026000 {
+			gpio-line-names = "BOOT_SEL",
+			"[ISP_CCLK1]",
+			"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
+			"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
+			"NC", "NC",
+			"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
+			"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
+		};
+
+		gpio11: gpio@f7027000 {
+			gpio-line-names =
+			"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
+			"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
+			"", "NC", "NC", "NC", "", "";
+		};
+
+		gpio12: gpio@f7028000 {
+			gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
+			"[BT_PCM_DO]",
+			"NC", "NC", "NC", "NC",
+			"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
+		};
+
+		gpio13: gpio@f7029000 {
+			gpio-line-names = "[UART0_RX]", "[UART0_TX]",
+			"[BT_UART1_CTS]", "[BT_UART1_RTS]",
+			"[BT_UART1_RX]", "[BT_UART1_TX]",
+			"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
+			"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
+		};
+
+		gpio14: gpio@f702a000 {
+			gpio-line-names =
+			"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
+			"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
+			"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
+			"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
+			"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
+			"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
+			"[I2C2_SCL]", "[I2C2_SDA]";
+		};
+
+		gpio15: gpio@f702b000 {
+			gpio-line-names = "", "", "", "", "", "", "NC", "";
+		};
+
+		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+
 		dwmmc_2: dwmmc2@f723f000 {
 			ti,non-removable;
 			non-removable;

arch/arm64/boot/dts/hisilicon/hi6220.dtsi

@@ -338,6 +338,22 @@ dual_timer0: timer@f8008000 {
 			clock-names = "timer1", "timer2", "apb_pclk";
 		};
 
+		rtc0: rtc@f8003000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8003000 0x0 0x1000>;
+			interrupts = <0 12 4>;
+			clocks = <&ao_ctrl HI6220_RTC0_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc1: rtc@f8004000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8004000 0x0 0x1000>;
+			interrupts = <0 8 4>;
+			clocks = <&ao_ctrl HI6220_RTC1_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
 		pmx0: pinmux@f7010000 {
 			compatible = "pinctrl-single";
 			reg = <0x0 0xf7010000  0x0 0x27c>;

arch/arm64/boot/dts/lg/Makefile

@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
+dtb-$(CONFIG_ARCH_LG1K) += lg1313-ref.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/lg/lg1313-ref.dts

@@ -0,0 +1,36 @@
+/*
+ * dts file for lg1313 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1313.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1313 Reference Board";
+	compatible = "lge,lg1313-ref", "lge,lg1313";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm64/boot/dts/lg/lg1313.dtsi

@@ -0,0 +1,351 @@
+/*
+ * dts file for lg1313 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1313";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c3700000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc3700000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupts-cells = <3>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		spi0: ssp@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: ssp@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status="disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -105,6 +105,41 @@ uart0: serial@12000 {
 				status = "disabled";
 			};
 
+			nb_perih_clk: nb-periph-clk@13000{
+				compatible = "marvell,armada-3700-periph-clock-nb";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			sb_perih_clk: sb-periph-clk@18000{
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				clocks = <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			gpio1: gpio@13800 {
+				compatible = "marvell,mvebu-gpio-3700",
+				"syscon", "simple-mfd";
+				reg = <0x13800 0x500>;
+
+				xtalclk: xtal-clk {
+					compatible = "marvell,armada-3700-xtal-clock";
+					clock-output-names = "xtal";
+					#clock-cells = <0>;
+				};
+			};
+
 			usb3: usb@58000 {
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -141,7 +141,7 @@ odmi: odmi@300000 {
 			};
 
 			xor@400000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
 				      <0x410000 0x1000>;
 				msi-parent = <&gic_v2m0>;
@@ -149,7 +149,7 @@ xor@400000 {
 			};
 
 			xor@420000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x420000 0x1000>,
 				      <0x430000 0x1000>;
 				msi-parent = <&gic_v2m0>;
@@ -157,7 +157,7 @@ xor@420000 {
 			};
 
 			xor@440000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x440000 0x1000>,
 				      <0x450000 0x1000>;
 				msi-parent = <&gic_v2m0>;
@@ -165,7 +165,7 @@ xor@440000 {
 			};
 
 			xor@460000 {
-				compatible = "marvell,mv-xor-v2";
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x460000 0x1000>,
 				      <0x470000 0x1000>;
 				msi-parent = <&gic_v2m0>;

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -107,6 +107,24 @@ cpm_usb3_1: usb3@510000 {
 				status = "disabled";
 			};
 
+			cpm_xor0: xor@6a0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6a0000 0x1000>,
+				      <0x6b0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cpm_syscon0 1 8>;
+			};
+
+			cpm_xor1: xor@6c0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6c0000 0x1000>,
+				      <0x6d0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cpm_syscon0 1 7>;
+			};
+
 			cpm_spi0: spi@700600 {
 				compatible = "marvell,armada-380-spi";
 				reg = <0x700600 0x50>;

arch/arm64/boot/dts/mediatek/Makefile

@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 

arch/arm64/boot/dts/mediatek/mt6755-evb.dts

@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6755.dtsi"
+
+/ {
+	model = "MediaTek MT6755 EVB";
+	compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm64/boot/dts/mediatek/mt6755.dtsi

@@ -0,0 +1,145 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt6755";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6755-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	gic: interrupt-controller@10231000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10231000 0 0x1000>,
+		      <0 0x10232000 0 0x2000>,
+		      <0 0x10234000 0 0x2000>,
+		      <0 0x10236000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -26,6 +26,23 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		ovl0 = &ovl0;
+		ovl1 = &ovl1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		rdma2 = &rdma2;
+		wdma0 = &wdma0;
+		wdma1 = &wdma1;
+		color0 = &color0;
+		color1 = &color1;
+		split0 = &split0;
+		split1 = &split1;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		dsi1 = &dsi1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -366,6 +383,26 @@ apmixedsys: clock-controller@10209000 {
 			#clock-cells = <1>;
 		};
 
+		mipi_tx0: mipi-dphy@10215000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10215000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: mipi-dphy@10216000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10216000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@10220000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -675,9 +712,181 @@ phy_port1: port@11291000 {
 		mmsys: clock-controller@14000000 {
 			compatible = "mediatek,mt8173-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 			#clock-cells = <1>;
 		};
 
+		ovl0: ovl@1400c000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		ovl1: ovl@1400d000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1>;
+			iommus = <&iommu M4U_PORT_DISP_OVL1>;
+			mediatek,larb = <&larb4>;
+		};
+
+		rdma0: rdma@1400e000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		rdma1: rdma@1400f000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,larb = <&larb4>;
+		};
+
+		rdma2: rdma@14010000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+			mediatek,larb = <&larb4>;
+		};
+
+		wdma0: wdma@14011000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		wdma1: wdma@14012000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+			mediatek,larb = <&larb4>;
+		};
+
+		color0: color@14013000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+		};
+
+		color1: color@14014000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+		};
+
+		aal@14015000 {
+			compatible = "mediatek,mt8173-disp-aal";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_AAL>;
+		};
+
+		gamma@14016000 {
+			compatible = "mediatek,mt8173-disp-gamma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+		};
+
+		merge@14017000 {
+			compatible = "mediatek,mt8173-disp-merge";
+			reg = <0 0x14017000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_MERGE>;
+		};
+
+		split0: split@14018000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14018000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+		};
+
+		split1: split@14019000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14019000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
+		};
+
+		ufoe@1401a000 {
+			compatible = "mediatek,mt8173-disp-ufoe";
+			reg = <0 0x1401a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+		};
+
+		dsi0: dsi@1401b000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401b000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
+				 <&mmsys CLK_MM_DSI0_DIGITAL>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsi1: dsi@1401c000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401c000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
+				 <&mmsys CLK_MM_DSI1_DIGITAL>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phy = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dpi0: dpi@1401d000 {
+			compatible = "mediatek,mt8173-dpi";
+			reg = <0 0x1401d000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+				 <&mmsys CLK_MM_DPI_ENGINE>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
 		pwm0: pwm@1401e000 {
 			compatible = "mediatek,mt8173-disp-pwm",
 				     "mediatek,mt6595-disp-pwm";
@@ -700,6 +909,14 @@ pwm1: pwm@1401f000 {
 			status = "disabled";
 		};
 
+		mutex: mutex@14020000 {
+			compatible = "mediatek,mt8173-disp-mutex";
+			reg = <0 0x14020000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+		};
+
 		larb0: larb@14021000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x14021000 0 0x1000>;
@@ -719,6 +936,12 @@ smi_common: smi@14022000 {
 			clock-names = "apb", "smi";
 		};
 
+		od@14023000 {
+			compatible = "mediatek,mt8173-disp-od";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OD>;
+		};
+
 		larb4: larb@14027000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x14027000 0 0x1000>;

arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi

@@ -1,3 +1,5 @@
+#include <dt-bindings/mfd/max77620.h>
+
 #include "tegra210.dtsi"
 
 / {
@@ -5,10 +7,15 @@ / {
 	compatible = "nvidia,p2180", "nvidia,tegra210";
 
 	aliases {
+		rtc0 = "/i2c@7000d000/pmic@3c";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
@@ -19,6 +26,248 @@ serial@70006000 {
 		status = "okay";
 	};
 
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				gpio2_3 {
+					pins = "gpio2", "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&vdd_pre>;
+				in-ldo7-8-supply = <&vdd_pre>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+
+				vdd_soc: sd0 {
+					regulator-name = "VDD_SOC";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <146>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_ddr: sd1 {
+					regulator-name = "VDD_DDR_1V1_PMIC";
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <130>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_pre: sd2 {
+					regulator-name = "VDD_PRE_REG_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8: sd3 {
+					regulator-name = "VDD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <242>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_sys_1v2: ldo0 {
+					regulator-name = "AVDD_SYS_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_pex_1v05: ldo1 {
+					regulator-name = "VDD_PEX_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vddio_sdmmc: ldo2 {
+					regulator-name = "VDDIO_SDMMC";
+					/*
+					 * Technically this supply should have
+					 * a supported range from 1.8 - 3.3 V.
+					 * However, that would cause the SDHCI
+					 * driver to request 2.7 V upon access
+					 * and that in turn will cause traffic
+					 * to be broken. Leave it at 3.3 V for
+					 * now.
+					 */
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_cam_hv: ldo3 {
+					regulator-name = "VDD_CAM_HV";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_rtc: ldo4 {
+					regulator-name = "VDD_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_ts_hv: ldo5 {
+					regulator-name = "VDD_TS_HV";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_ts: ldo6 {
+					regulator-name = "VDD_TS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				avdd_1v05_pll: ldo7 {
+					regulator-name = "AVDD_1V05_PLL";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				avdd_1v05: ldo8 {
+					regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+			};
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 	};

arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts

@@ -6,4 +6,49 @@
 / {
 	model = "NVIDIA Jetson TX1 Developer Kit";
 	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+			panel@0 {
+				compatible = "auo,b080uan01";
+				reg = <0>;
+
+				enable-gpios = <&gpio TEGRA_GPIO(V, 2)
+						GPIO_ACTIVE_HIGH>;
+				power-supply = <&vdd_5v0_io>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		backlight: backlight@2c {
+			compatible = "ti,lp8557";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0xff>;
+
+			pwm-period = <29334>;
+
+			pwms = <&pwm 0 29334>;
+			pwm-names = "lp8557";
+
+			/* 3 LED string */
+			rom_14h {
+				rom-addr = /bits/ 8 <0x14>;
+				rom-val = /bits/ 8 <0x87>;
+			};
+
+			/* boost frequency 1 MHz */
+			rom_13h {
+				rom-addr = /bits/ 8 <0x13>;
+				rom-val = /bits/ 8 <0x01>;
+			};
+		};
+	};
 };

arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi

@@ -4,6 +4,24 @@ / {
 	model = "NVIDIA Tegra210 P2597 I/O board";
 	compatible = "nvidia,p2597", "nvidia,tegra210";
 
+	host1x@50000000 {
+		dpaux@54040000 {
+			status = "okay";
+		};
+
+		sor@54580000 {
+			status = "okay";
+
+			avdd-io-supply = <&avdd_1v05>;
+			vdd-pll-supply = <&vdd_1v8>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+					   GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1261,6 +1279,169 @@ shutdown {
 		};
 	};
 
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		exp1: gpio@74 {
+			compatible = "ti,tca9539";
+			reg = <0x74>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+			    "usb3-1";
+
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		/* XXX what are these? */
+		avdd-pll-utmip-supply = <&vdd_1v8>;
+		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+		dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-3 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "pcie-x1";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-5 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+			};
+
+			usb2-1 {
+				status = "okay";
+				vbus-supply = <&vdd_5v0_rtl>;
+				mode = "host";
+			};
+
+			usb2-2 {
+				status = "okay";
+				vbus-supply = <&vdd_usb_vbus>;
+				mode = "host";
+			};
+
+			usb2-3 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
 	/* MMC/SD */
 	sdhci@700b0000 {
 		status = "okay";
@@ -1268,6 +1449,144 @@ sdhci@700b0000 {
 		no-1-8-v;
 
 		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+
+		vqmmc-supply = <&vddio_sdmmc>;
+		vmmc-supply = <&vdd_3v3_sd>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_sys_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VDD_SYS_MUX";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_5V0_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_sys_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "VDD_3V3_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_sys_mux>;
+
+			regulator-enable-ramp-delay = <160>;
+			regulator-disable-ramp-delay = <10000>;
+		};
+
+		vdd_5v0_io: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "VDD_5V0_IO_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_3v3_sd: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "VDD_3V3_SD";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+
+			regulator-enable-ramp-delay = <472>;
+			regulator-disable-ramp-delay = <4880>;
+		};
+
+		vdd_dsi_csi: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "AVDD_DSI_CSI_1V2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			vin-supply = <&vdd_sys_1v2>;
+		};
+
+		vdd_3v3_dis: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDD_DIS_3V3_LCD";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_1v8_dis: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "VDD_LCD_1V8_DIS";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_1v8>;
+		};
+
+		vdd_5v0_rtl: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "RTL_5V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb_vbus: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "USB_VBUS_EN1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_hdmi: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "VDD_HDMI_5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&exp1 12 GPIO_ACTIVE_LOW>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
 	};
 
 	gpio-keys {

arch/arm64/boot/dts/nvidia/tegra210-smaug.dts

@@ -1,6 +1,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/max77620.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 
 #include "tegra210.dtsi"
@@ -1327,6 +1328,234 @@ battery: bq27742@55 {
 		};
 	};
 
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		max77620: max77620@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <0 86 IRQ_TYPE_NONE>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			max77620_default: pinmux@0 {
+				pin_gpio {
+					pins = "gpio0", "gpio1", "gpio2", "gpio7";
+					function = "gpio";
+				};
+
+				/*
+				 * GPIO3 is used to en_pp3300, and it is part of power
+				 * sequence, So it must be sequenced up (automatically
+				 * set by OTP) and down properly.
+				 */
+				pin_gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <4>;
+					maxim,active-fps-power-down-slot = <2>;
+				};
+
+				pin_gpio5_6 {
+					pins = "gpio5", "gpio6";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+
+				pin_32k {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&pp1350>;
+				in-ldo2-supply = <&pp3300>;
+				in-ldo3-5-supply = <&pp3300>;
+				in-ldo7-8-supply = <&pp1350>;
+
+				ppvar_soc: sd0 {
+					regulator-name = "PPVAR_SOC";
+					regulator-min-microvolt = <825000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1100_sd1: sd1 {
+					regulator-name = "PP1100";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <5>;
+					maxim,active-fps-power-down-slot = <1>;
+				};
+
+				pp1350: sd2 {
+					regulator-name = "PP1350";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <2>;
+					maxim,active-fps-power-down-slot = <5>;
+				};
+
+				pp1800: sd3 {
+					regulator-name = "PP1800";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <3>;
+				};
+
+				pp1200_avdd: ldo0 {
+					regulator-name = "PP1200_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1200_rcam: ldo1 {
+					regulator-name = "PP1200_RCAM";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp_ldo2: ldo2 {
+					regulator-name = "PP_LDO2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <11000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_rcam: ldo3 {
+					regulator-name = "PP2800L_RCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp100_soc_rtc: ldo4 {
+					regulator-name = "PP1100_SOC_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on; /* Check this */
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_fcam: ldo5 {
+					regulator-name = "PP2800L_FCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				ldo6 {
+					/* Unused. */
+					regulator-name = "PP_LDO6";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1050_avdd: ldo7 {
+					regulator-name = "PP1050_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				avddio_1v05: ldo8 {
+					regulator-name = "AVDDIO_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+			};
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
@@ -1421,4 +1650,89 @@ psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		device_type = "fixed-regulators";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ppvar_sys: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "PPVAR_SYS";
+			regulator-min-microvolt = <4400000>;
+			regulator-max-microvolt = <4400000>;
+			regulator-always-on;
+		};
+
+		pplcd_vdd: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "PPLCD_VDD";
+			regulator-min-microvolt = <4400000>;
+			regulator-max-microvolt = <4400000>;
+			gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		pp3000_always: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "PP3000_ALWAYS";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		pp3300: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "PP3300";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+		};
+
+		pp5000: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "PP5000";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		pp1800_lcdio: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "PP1800_LCDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		pp1800_cam: regulator@6 {
+			compatible = "regulator-fixed";
+			reg= <6>;
+			regulator-name = "PP1800_CAM";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+			enable-active-high;
+		};
+
+		usbc_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "USBC_VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
 };

arch/arm64/boot/dts/nvidia/tegra210.dtsi

@@ -35,6 +35,26 @@ dpaux1: dpaux@54040000 {
 			resets = <&tegra_car 207>;
 			reset-names = "dpaux";
 			status = "disabled";
+
+			state_dpaux1_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux1_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux1_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		vi@54080000 {
@@ -154,6 +174,10 @@ sor@54540000 {
 			clock-names = "sor", "parent", "dp", "safe";
 			resets = <&tegra_car 182>;
 			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux_aux>;
+			pinctrl-1 = <&state_dpaux_i2c>;
+			pinctrl-2 = <&state_dpaux_off>;
+			pinctrl-names = "aux", "i2c", "off";
 			status = "disabled";
 		};
 
@@ -162,12 +186,17 @@ sor@54580000 {
 			reg = <0x0 0x54580000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA210_CLK_SOR1>,
+				 <&tegra_car TEGRA210_CLK_SOR1_SRC>,
 				 <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
 				 <&tegra_car TEGRA210_CLK_PLL_DP>,
 				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
-			clock-names = "sor", "parent", "dp", "safe";
+			clock-names = "sor", "source", "parent", "dp", "safe";
 			resets = <&tegra_car 183>;
 			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux1_aux>;
+			pinctrl-1 = <&state_dpaux1_i2c>;
+			pinctrl-2 = <&state_dpaux1_off>;
+			pinctrl-names = "aux", "i2c", "off";
 			status = "disabled";
 		};
 
@@ -181,6 +210,26 @@ dpaux: dpaux@545c0000 {
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
 			status = "disabled";
+
+			state_dpaux_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		isp@54600000 {
@@ -478,6 +527,9 @@ i2c@7000c700 {
 		reset-names = "i2c";
 		dmas = <&apbdma 26>, <&apbdma 26>;
 		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux1_i2c>;
+		pinctrl-1 = <&state_dpaux1_off>;
+		pinctrl-names = "default", "idle";
 		status = "disabled";
 	};
 
@@ -508,6 +560,9 @@ i2c@7000d100 {
 		reset-names = "i2c";
 		dmas = <&apbdma 30>, <&apbdma 30>;
 		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux_i2c>;
+		pinctrl-1 = <&state_dpaux_off>;
+		pinctrl-names = "default", "idle";
 		status = "disabled";
 	};
 
@@ -584,6 +639,39 @@ pmc: pmc@7000e400 {
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
+
+		powergates {
+			pd_audio: aud {
+				clocks = <&tegra_car TEGRA210_CLK_APE>,
+					 <&tegra_car TEGRA210_CLK_APB2APE>;
+				resets = <&tegra_car 198>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbss: xusba {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				clock-names = "xusb-ss";
+				resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				reset-names = "xusb-ss";
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbdev: xusbb {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
+				clock-names = "xusb-dev";
+				resets = <&tegra_car 95>;
+				reset-names = "xusb-dev";
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbhost: xusbc {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				clock-names = "xusb-host";
+				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				reset-names = "xusb-host";
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	fuse@7000f800 {
@@ -621,6 +709,196 @@ hda@70030000 {
 		status = "disabled";
 	};
 
+	usb@70090000 {
+		compatible = "nvidia,tegra210-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA210_CLK_CLK_M>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra210-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		status = "disabled";
+
+		pads {
+			usb2 {
+				clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 205>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-5 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-6 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 204>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			usb2-3 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			usb3-2 {
+				status = "disabled";
+			};
+
+			usb3-3 {
+				status = "disabled";
+			};
+		};
+	};
+
 	sdhci@700b0000 {
 		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
@@ -673,6 +951,18 @@ mipi: mipi@700e3000 {
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	aconnect@702c0000 {
+		compatible = "nvidia,tegra210-aconnect";
+		clocks = <&tegra_car TEGRA210_CLK_APE>,
+			 <&tegra_car TEGRA210_CLK_APB2APE>;
+		clock-names = "ape", "apb2ape";
+		power-domains = <&pd_audio>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
+		status = "disabled";
+	};
+
 	spi@70410000 {
 		compatible = "nvidia,tegra210-qspi";
 		reg = <0x0 0x70410000 0x0 0x1000>;

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -33,6 +33,10 @@ chosen {
 	};
 
 	soc {
+		dma@7884000 {
+			status = "okay";
+		};
+
 		serial@78af000 {
 			label = "LS-UART0";
 			status = "okay";
@@ -140,6 +144,18 @@ sdhci@07824000 {
 			status = "okay";
 		};
 
+		sdhci@07864000 {
+			vmmc-supply = <&pm8916_l11>;
+			vqmmc-supply = <&pm8916_l12>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+			cd-gpios = <&msmgpio 38 0x1>;
+			status = "okay";
+		};
+
 		usb@78d9000 {
 			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -42,13 +42,48 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		reserve_aligned@86000000 {
+		tz-apps@86000000 {
-			reg = <0x0 0x86000000 0x0 0x0300000>;
+			reg = <0x0 0x86000000 0x0 0x300000>;
 			no-map;
 		};
 
 		smem_mem: smem_region@86300000 {
-			reg = <0x0 0x86300000 0x0 0x0100000>;
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@8668000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+		};
+
+		rfsa@867e00000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		wcnss@89300000 {
+			reg = <0x0 0x89300000 0x0 0x600000>;
 			no-map;
 		};
 	};
@@ -62,6 +97,8 @@ CPU0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU1: cpu@1 {
@@ -69,6 +106,8 @@ CPU1: cpu@1 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU2: cpu@2 {
@@ -76,6 +115,8 @@ CPU2: cpu@2 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		CPU3: cpu@3 {
@@ -83,12 +124,35 @@ CPU3: cpu@3 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SPC>;
 		};
 
 		L2_0: l2-cache {
 		      compatible = "cache";
 		      cache-level = <2>;
 		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
 	};
 
 	timer {
@@ -122,6 +186,14 @@ smem {
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm64/boot/dts/qcom/msm8996-pins.dtsi

@@ -0,0 +1,303 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+&msmgpio {
+
+	blsp1_spi0_default: blsp1_spi0_default {
+		pinmux {
+			function = "blsp_spi1";
+			pins = "gpio0", "gpio1", "gpio3";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio2";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio3";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio2";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	blsp1_spi0_sleep: blsp1_spi0_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	blsp1_i2c2_default: blsp1_i2c2_default {
+		pinmux {
+			function = "blsp_i2c3";
+			pins = "gpio47", "gpio48";
+		};
+		pinconf {
+			pins = "gpio47", "gpio48";
+			drive-strength = <16>;
+			bias-disable = <0>;
+		};
+	};
+
+	blsp1_i2c2_sleep: blsp1_i2c2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio47", "gpio48";
+		};
+		pinconf {
+			pins = "gpio47", "gpio48";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	blsp2_i2c0_default: blsp2_i2c0 {
+		pinmux {
+			function = "blsp_i2c7";
+			pins = "gpio55", "gpio56";
+		};
+		pinconf {
+			pins = "gpio55", "gpio56";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_i2c0_sleep: blsp2_i2c0_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio55", "gpio56";
+		};
+		pinconf {
+			pins = "gpio55", "gpio56";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_2pins_default: blsp2_uart1_2pins {
+		pinmux {
+			function = "blsp_uart8";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_2pins_sleep: blsp2_uart1_2pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5";
+		};
+		pinconf {
+			pins = "gpio4", "gpio5";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_4pins_default: blsp2_uart1_4pins {
+		pinmux {
+			function = "blsp_uart8";
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		};
+
+		pinconf {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart1_4pins_sleep: blsp2_uart1_4pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		};
+
+		pinconf {
+			pins = "gpio4", "gpiio5", "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_i2c1_default: blsp2_i2c1 {
+		pinmux {
+			function = "blsp_i2c8";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_i2c1_sleep: blsp2_i2c1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_2pins_default: blsp2_uart2_2pins {
+		pinmux {
+			function = "blsp_uart9";
+			pins = "gpio49", "gpio50";
+		};
+		pinconf {
+			pins = "gpio49", "gpio50";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_2pins_sleep: blsp2_uart2_2pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio49", "gpio50";
+		};
+		pinconf {
+			pins = "gpio49", "gpio50";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_4pins_default: blsp2_uart2_4pins {
+		pinmux {
+			function = "blsp_uart9";
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+		};
+
+		pinconf {
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp2_uart2_4pins_sleep: blsp2_uart2_4pins_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+		};
+
+		pinconf {
+			pins = "gpio49", "gpio50", "gpio51", "gpio52";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	blsp2_spi5_default: blsp2_spi5_default {
+		pinmux {
+			function = "blsp_spi12";
+			pins = "gpio85", "gpio86", "gpio88";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio87";
+		};
+		pinconf {
+			pins = "gpio85", "gpio86", "gpio88";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio87";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	blsp2_spi5_sleep: blsp2_spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio85", "gpio86", "gpio87", "gpio88";
+		};
+		pinconf {
+			pins = "gpio85", "gpio86", "gpio87", "gpio88";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	sdc2_clk_on: sdc2_clk_on {
+		config {
+			pins = "sdc2_clk";
+			bias-disable;		/* NO pull */
+			drive-strength = <16>;	/* 16 MA */
+		};
+	};
+
+	sdc2_clk_off: sdc2_clk_off {
+		config {
+			pins = "sdc2_clk";
+			bias-disable;		/* NO pull */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	sdc2_cmd_on: sdc2_cmd_on {
+		config {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <10>;	/* 10 MA */
+		};
+	};
+
+	sdc2_cmd_off: sdc2_cmd_off {
+		config {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	sdc2_data_on: sdc2_data_on {
+		config {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <10>;	/* 10 MA */
+		};
+	};
+
+	sdc2_data_off: sdc2_data_off {
+		config {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+};

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -151,6 +151,36 @@ gcc: clock-controller@300000 {
 			reg = <0x300000 0x90000>;
 		};
 
+		blsp1_spi0: spi@07575000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07575000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi0_default>;
+			pinctrl-1 = <&blsp1_spi0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c0: i2c@075b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b5000 0x1000>;
+			interrupts = <GIC_SPI 101 0>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c0_default>;
+			pinctrl-1 = <&blsp2_i2c0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
@@ -161,7 +191,77 @@ blsp2_uart1: serial@75b0000 {
 			status = "disabled";
 		};
 
-		pinctrl@1010000 {
+		blsp2_i2c1: i2c@075b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b6000 0x1000>;
+			interrupts = <GIC_SPI 102 0>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@75b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b1000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@07577000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07577000 0x1000>;
+			interrupts = <GIC_SPI 97 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi5: spi@075ba000{
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x075ba000 0x600>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_spi5_default>;
+			pinctrl-1 = <&blsp2_spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhc2: sdhci@74a4900 {
+			 status = "disabled";
+			 compatible = "qcom,sdhci-msm-v4";
+			 reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+			 reg-names = "hc_mem", "core_mem";
+
+			 interrupts = <0 125 0>, <0 221 0>;
+			 interrupt-names = "hc_irq", "pwr_irq";
+
+			 clock-names = "iface", "core";
+			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+			 <&gcc GCC_SDCC2_APPS_CLK>;
+			 bus-width = <4>;
+		 };
+
+		msmgpio: pinctrl@1010000 {
 			compatible = "qcom,msm8996-pinctrl";
 			reg = <0x01010000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -267,3 +367,4 @@ mmcc: clock-controller@8c0000 {
 		};
 	};
 };
+#include "msm8996-pins.dtsi"

arch/arm64/boot/dts/renesas/Makefile

@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb

arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts

@@ -62,7 +62,7 @@ x12_clk: x12_clk {
 		clock-frequency = <24576000>;
 	};
 
-	vcc_sdhi0: regulator@1 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -73,7 +73,7 @@ vcc_sdhi0: regulator@1 {
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@2 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -86,7 +86,7 @@ vccq_sdhi0: regulator@2 {
 			  1800000 0>;
 	};
 
-	vcc_sdhi3: regulator@3 {
+	vcc_sdhi3: regulator-vcc-sdhi3 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI3 Vcc";
@@ -97,7 +97,7 @@ vcc_sdhi3: regulator@3 {
 		enable-active-high;
 	};
 
-	vccq_sdhi3: regulator@4 {
+	vccq_sdhi3: regulator-vccq-sdhi3 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI3 VccQ";
@@ -208,6 +208,7 @@ &scif1 {
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";
 
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -329,6 +330,11 @@ &ssi1 {
 	shared-pin;
 };
 
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
 &audio_clk_a {
 	clock-frequency = <22579200>;
 };

arch/arm64/boot/dts/renesas/r8a7795.dtsi

@@ -53,6 +53,7 @@ a57_1: cpu@1 {
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
+
 		a57_2: cpu@2 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x2>;
@@ -61,6 +62,7 @@ a57_2: cpu@2 {
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
+
 		a57_3: cpu@3 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x3>;
@@ -69,21 +71,23 @@ a57_3: cpu@3 {
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
 		};
-	};
 
 		L2_CA57: cache-controller@0 {
 			compatible = "cache";
+			reg = <0>;
 			power-domains = <&sysc R8A7795_PD_CA57_SCU>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
-	L2_CA53: cache-controller@1 {
+		L2_CA53: cache-controller@100 {
 			compatible = "cache";
+			reg = <0x100>;
 			power-domains = <&sysc R8A7795_PD_CA53_SCU>;
 			cache-unified;
 			cache-level = <2>;
 		};
+	};
 
 	extal_clk: extal {
 		compatible = "fixed-clock";
@@ -151,19 +155,27 @@ soc {
 		#size-cells = <2>;
 		ranges;
 
-		gic: interrupt-controller@0xf1010000 {
+		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
 			reg = <0x0 0xf1010000 0 0x1000>,
-			      <0x0 0xf1020000 0 0x2000>,
+			      <0x0 0xf1020000 0 0x20000>,
 			      <0x0 0xf1040000 0 0x20000>,
-			      <0x0 0xf1060000 0 0x2000>;
+			      <0x0 0xf1060000 0 0x20000>;
 			interrupts = <GIC_PPI 9
 					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		wdt0: watchdog@e6020000 {
+			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a7795",
 				     "renesas,gpio-rcar";
@@ -571,6 +583,30 @@ can1: can@e6c38000 {
 			status = "disabled";
 		};
 
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a7795",
 				     "renesas,rcar-gen3-hscif",
@@ -749,6 +785,8 @@ i2c0: i2c@e6500000 {
 			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 931>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -761,6 +799,8 @@ i2c1: i2c@e6508000 {
 			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 930>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <6>;
 			status = "disabled";
 		};
@@ -773,6 +813,8 @@ i2c2: i2c@e6510000 {
 			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 929>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <6>;
 			status = "disabled";
 		};
@@ -785,6 +827,8 @@ i2c3: i2c@e66d0000 {
 			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 928>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -797,6 +841,8 @@ i2c4: i2c@e66d8000 {
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 927>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -809,6 +855,8 @@ i2c5: i2c@e66e0000 {
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 919>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <110>;
 			status = "disabled";
 		};
@@ -821,6 +869,8 @@ i2c6: i2c@e66e8000 {
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
 			i2c-scl-internal-delay-ns = <6>;
 			status = "disabled";
 		};
@@ -874,63 +924,63 @@ rcar_sound: sound@ec500000 {
 			status = "disabled";
 
 			rcar_sound,dvc {
-				dvc0: dvc@0 {
+				dvc0: dvc-0 {
 					dmas = <&audma0 0xbc>;
 					dma-names = "tx";
 				};
-				dvc1: dvc@1 {
+				dvc1: dvc-1 {
 					dmas = <&audma0 0xbe>;
 					dma-names = "tx";
 				};
 			};
 
 			rcar_sound,src {
-				src0: src@0 {
+				src0: src-0 {
 					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x85>, <&audma1 0x9a>;
 					dma-names = "rx", "tx";
 				};
-				src1: src@1 {
+				src1: src-1 {
 					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x87>, <&audma1 0x9c>;
 					dma-names = "rx", "tx";
 				};
-				src2: src@2 {
+				src2: src-2 {
 					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x89>, <&audma1 0x9e>;
 					dma-names = "rx", "tx";
 				};
-				src3: src@3 {
+				src3: src-3 {
 					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 					dma-names = "rx", "tx";
 				};
-				src4: src@4 {
+				src4: src-4 {
 					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 					dma-names = "rx", "tx";
 				};
-				src5: src@5 {
+				src5: src-5 {
 					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 					dma-names = "rx", "tx";
 				};
-				src6: src@6 {
+				src6: src-6 {
 					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x91>, <&audma1 0xb4>;
 					dma-names = "rx", "tx";
 				};
-				src7: src@7 {
+				src7: src-7 {
 					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x93>, <&audma1 0xb6>;
 					dma-names = "rx", "tx";
 				};
-				src8: src@8 {
+				src8: src-8 {
 					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x95>, <&audma1 0xb8>;
 					dma-names = "rx", "tx";
 				};
-				src9: src@9 {
+				src9: src-9 {
 					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x97>, <&audma1 0xba>;
 					dma-names = "rx", "tx";
@@ -938,52 +988,52 @@ src9: src@9 {
 			};
 
 			rcar_sound,ssi {
-				ssi0: ssi@0 {
+				ssi0: ssi-0 {
 					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi1: ssi@1 {
+				ssi1: ssi-1 {
 					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi2: ssi@2 {
+				ssi2: ssi-2 {
 					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi3: ssi@3 {
+				ssi3: ssi-3 {
 					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi4: ssi@4 {
+				ssi4: ssi-4 {
 					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi5: ssi@5 {
+				ssi5: ssi-5 {
 					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi6: ssi@6 {
+				ssi6: ssi-6 {
 					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi7: ssi@7 {
+				ssi7: ssi-7 {
 					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi8: ssi@8 {
+				ssi8: ssi-8 {
 					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
-				ssi9: ssi@9 {
+				ssi9: ssi-9 {
 					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 					dma-names = "rx", "tx", "rxu", "txu";

arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts

@@ -0,0 +1,50 @@
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a7796";
+	compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&scif2 {
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};

arch/arm64/boot/dts/renesas/r8a7796.dtsi

@@ -0,0 +1,138 @@
+/*
+ * Device Tree Source for the r8a7796 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7796";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1 core only at this point */
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+
+		L2_CA57: cache-controller@0 {
+			compatible = "cache";
+			reg = <0>;
+			power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		wdt0: watchdog@e6020000 {
+			compatible = "renesas,r8a7796-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7796-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7796-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+	};
+};

arch/arm64/boot/dts/rockchip/rk3368-r88.dts

@@ -236,6 +236,15 @@ hym8563: hym8563@51 {
 	};
 };
 
+&io_domains {
+	status = "ok";
+
+	audio-supply = <&vcc_io>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	wifi-supply = <&vccio_wl>;
+};
+
 &sdio0 {
 	assigned-clocks = <&cru SCLK_SDIO0>;
 	assigned-clock-parents = <&cru PLL_CPLL>;
@@ -329,6 +338,13 @@ host_vbus_drv: host-vbus-drv {
 	};
 };
 
+&pmu_io_domains {
+	status = "okay";
+
+	pmu-supply = <&vcc_io>;
+	vop-supply = <&vcc_io>;
+};
+
 &saradc {
 	vref-supply = <&vcc_18>;
 	status = "okay";

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -632,8 +632,13 @@ mbox: mbox@ff6b0000 {
 	};
 
 	pmugrf: syscon@ff738000 {
-		compatible = "rockchip,rk3368-pmugrf", "syscon";
+		compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff738000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	cru: clock-controller@ff760000 {
@@ -645,8 +650,13 @@ cru: clock-controller@ff760000 {
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3368-grf", "syscon";
+		compatible = "rockchip,rk3368-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3368-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	wdt: watchdog@ff800000 {
@@ -670,7 +680,7 @@ gic: interrupt-controller@ffb71000 {
 		#address-cells = <0>;
 
 		reg = <0x0 0xffb71000 0x0 0x1000>,
-		      <0x0 0xffb72000 0x0 0x1000>,
+		      <0x0 0xffb72000 0x0 0x2000>,
 		      <0x0 0xffb74000 0x0 0x2000>,
 		      <0x0 0xffb76000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9

arch/arm64/boot/dts/rockchip/rk3399-evb.dts

@@ -77,6 +77,10 @@ vcc_phy: vcc-phy-regulator {
 	};
 };
 
+&emmc_phy {
+	status = "okay";
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -89,6 +93,14 @@ &pwm3 {
 	status = "okay";
 };
 
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3399";
@@ -54,6 +55,15 @@ / {
 	#size-cells = <2>;
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -215,6 +225,22 @@ sdmmc: dwmmc@fe320000 {
 		status = "disabled";
 	};
 
+	sdhci: sdhci@fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		arasan,soc-ctl-syscon = <&grf>;
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "emmc_cardclock";
+		#clock-cells = <0>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb@fe380000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe380000 0x0 0x20000>;
@@ -272,6 +298,96 @@ its: interrupt-controller@fee20000 {
 		};
 	};
 
+	i2c1: i2c@ff110000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C1>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff120000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C2>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff130000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C3>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff140000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C5>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@ff150000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C6>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@ff160000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C7>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	uart0: serial@ff180000 {
 		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xff180000 0x0 0x100>;
@@ -389,9 +505,105 @@ spi5: spi@ff200000 {
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff260000 {
+		compatible = "rockchip,rk3399-tsadc";
+		reg = <0x0 0xff260000 0x0 0x100>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
+		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	spi3: spi@ff350000 {
@@ -420,6 +632,51 @@ uart4: serial@ff370000 {
 		status = "disabled";
 	};
 
+	i2c0: i2c@ff3c0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3c0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff3d0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3d0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@ff3e0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3e0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pwm0: pwm@ff420000 {
 		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
 		reg = <0x0 0xff420000 0x0 0x10>;
@@ -478,11 +735,43 @@ cru: clock-controller@ff760000 {
 		reg = <0x0 0xff760000 0x0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+		assigned-clocks =
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru PLL_NPLL>,
+			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+			<&cru PCLK_PERIHP>,
+			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+			<&cru PCLK_PERILP0>,
+			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
+		assigned-clock-rates =
+			 <594000000>,  <800000000>,
+			<1000000000>,
+			 <150000000>,   <75000000>,
+			  <37500000>,
+			 <100000000>,  <100000000>,
+			  <50000000>,
+			 <100000000>,   <50000000>;
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3399-io-voltage-domain";
+			status = "disabled";
+		};
+
+		emmc_phy: phy@f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x24>;
+			clocks = <&sdhci>;
+			clock-names = "emmcclk";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
 	};
 
 	watchdog@ff840000 {
@@ -764,6 +1053,16 @@ i2s1_2ch_bus: i2s1-2ch-bus {
 			};
 		};
 
+		sleep {
+			ap_pwroff: ap-pwroff {
+				rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		spdif {
 			spdif_bus: spdif-bus {
 				rockchip,pins =
@@ -889,6 +1188,16 @@ spi5_tx: spi5-tx {
 			};
 		};
 
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <1 6 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins =

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi

@@ -42,6 +42,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+/memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
+
 / {
 	compatible = "socionext,ph1-ld20";
 	#address-cells = <2>;
@@ -77,7 +79,7 @@ cpu0: cpu@0 {
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0 0x000>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 
 		cpu1: cpu@1 {
@@ -85,7 +87,7 @@ cpu1: cpu@1 {
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0 0x001>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 
 		cpu2: cpu@100 {
@@ -93,7 +95,7 @@ cpu2: cpu@100 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x100>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 
 		cpu3: cpu@101 {
@@ -101,7 +103,7 @@ cpu3: cpu@101 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x101>;
 			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000100>;
+			cpu-release-addr = <0 0x80000000>;
 		};
 	};
 
@@ -264,9 +266,13 @@ smpctrl@59800000 {
 			reg = <0x59801000 0x400>;
 		};
 
-		pinctrl: pinctrl@5f801000 {
+		soc-glue@5f800000 {
-			compatible = "socionext,ph1-ld20-pinctrl", "syscon";
+			compatible = "simple-mfd", "syscon";
-			reg = <0x5f801000 0xe00>;
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				 compatible = "socionext,uniphier-ld20-pinctrl";
+			};
 		};
 
 		gic: interrupt-controller@5fe00000 {