commit 01b05fc0e5 upstream.
On short runs it is possible to get no samples on a cpu, like this:
# rtla timerlat hist -u -T50
Index IRQ-001 Thr-001 Usr-001 IRQ-002 Thr-002 Usr-002
2 1 0 0 0 0 0
33 0 1 0 0 0 0
36 0 0 1 0 0 0
49 0 0 0 1 0 0
52 0 0 0 0 1 0
over: 0 0 0 0 0 0
count: 1 1 1 1 1 0
min: 2 33 36 49 52 18446744073709551615
avg: 2 33 36 49 52 -
max: 2 33 36 49 52 0
rtla timerlat hit stop tracing
IRQ handler delay: (exit from idle) 48.21 us (91.09 %)
IRQ latency: 49.11 us
Timerlat IRQ duration: 2.17 us (4.09 %)
Blocking thread: 1.01 us (1.90 %)
swapper/2:0 1.01 us
------------------------------------------------------------------------
Thread latency: 52.93 us (100%)
Max timerlat IRQ latency from idle: 49.11 us in cpu 2
Note, the value 18446744073709551615 is the same as ~0.
Fix this by reporting no results for the min, avg and max if the count
is 0.
Link: https://lkml.kernel.org/r/20240510190318.44295-1-jkacur@redhat.com
Cc: stable@vger.kernel.org
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Suggested-by: Daniel Bristot de Oliveria <bristot@kernel.org>
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4731baaf2 upstream.
The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.
In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.
Tested on a AMD Zen4 EPYC server
Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422
After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527
Fixes: ec437d71db ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ea00e249c upstream.
tpm_tis_core_init() may fail before tpm_tis_probe_irq_single() is
called, in which case tpm_tis_remove() unconditionally calling
flush_work() is triggering a warning for .func still being NULL.
Cc: stable@vger.kernel.org # v6.5+
Fixes: 481c2d1462 ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef3cec44c upstream.
As noticed by Brian, KMSAN should not be zeroing the origin when
unpoisoning parts of a four-byte uninitialized value, e.g.:
char a[4];
kmsan_unpoison_memory(a, 1);
This led to false negatives, as certain poisoned values could receive zero
origins, preventing those values from being reported.
To fix the problem, check that kmsan_internal_set_shadow_origin() writes
zero origins only to slots which have zero shadow.
Link: https://lkml.kernel.org/r/20240528104807.738758-1-glider@google.com
Fixes: f80be4571b ("kmsan: add KMSAN runtime core")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/lkml/20240524232804.1984355-1-bjohannesmeyer@gmail.com/T/
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2dc78b86e upstream.
We normally ksm_zero_pages++ in ksmd when page is merged with zero page,
but ksm_zero_pages-- is done from page tables side, where there is no any
accessing protection of ksm_zero_pages.
So we can read very exceptional value of ksm_zero_pages in rare cases,
such as -1, which is very confusing to users.
Fix it by changing to use atomic_long_t, and the same case with the
mm->ksm_zero_pages.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-2-34bb358fdc13@linux.dev
Fixes: e2942062e0 ("ksm: count all zero pages placed by KSM")
Fixes: 6080d19f07 ("ksm: add ksm zero pages for each process")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 730cdc2c72 upstream.
Patch series "mm/ksm: fix some accounting problems", v3.
We encountered some abnormal ksm_pages_scanned and ksm_zero_pages during
some random tests.
1. ksm_pages_scanned unchanged even ksmd scanning has progress.
2. ksm_zero_pages maybe -1 in some rare cases.
This patch (of 2):
During testing, I found ksm_pages_scanned is unchanged although the
scan_get_next_rmap_item() did return valid rmap_item that is not NULL.
The reason is the scan_get_next_rmap_item() will return NULL after a full
scan, so ksm_do_scan() just return without accounting of the
ksm_pages_scanned.
Fix it by just putting ksm_pages_scanned accounting in that loop, and it
will be accounted more timely if that loop would last for a long time.
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-0-34bb358fdc13@linux.dev
Link: https://lkml.kernel.org/r/20240528-b4-ksm-counters-v3-1-34bb358fdc13@linux.dev
Fixes: b348b5fe2b ("mm/ksm: add pages scanned metric")
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb48727238 upstream.
Problem
=========
After commit 67f6951347 ("ipv6: Move setting default metric for routes"),
we noticed that the logic of assigning the default value of fc_metirc
changed in the ioctl process. That is, when users use ioctl(fd, SIOCADDRT,
rt) with a non-zero metric to add a route, then they may fail to delete a
route with passing in a metric value of 0 to the kernel by ioctl(fd,
SIOCDELRT, rt). But iproute can succeed in deleting it.
As a reference, when using iproute tools by netlink to delete routes with
a metric parameter equals 0, like the command as follows:
ip -6 route del fe80::/64 via fe81::5054:ff:fe11:3451 dev eth0 metric 0
the user can still succeed in deleting the route entry with the smallest
metric.
Root Reason
===========
After commit 67f6951347 ("ipv6: Move setting default metric for routes"),
When ioctl() pass in SIOCDELRT with a zero metric, rtmsg_to_fib6_config()
will set a defalut value (1024) to cfg->fc_metric in kernel, and in
ip6_route_del() and the line 4074 at net/ipv3/route.c, it will check by
if (cfg->fc_metric && cfg->fc_metric != rt->fib6_metric)
continue;
and the condition is true and skip the later procedure (deleting route)
because cfg->fc_metric != rt->fib6_metric. But before that commit,
cfg->fc_metric is still zero there, so the condition is false and it
will do the following procedure (deleting).
Solution
========
In order to keep a consistent behaviour across netlink() and ioctl(), we
should allow to delete a route with a metric value of 0. So we only do
the default setting of fc_metric in route adding.
CC: stable@vger.kernel.org # 5.4+
Fixes: 67f6951347 ("ipv6: Move setting default metric for routes")
Co-developed-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240514201102055dD2Ba45qKbLlUMxu_DTHP@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d09c05aa35 upstream.
Peter Schneider reported that a system would no longer boot after
updating to 6.8.4. Peter bisected the issue and identified commit
b5fc07a5fb ("scsi: core: Consult supported VPD page list prior to
fetching page") as being the culprit.
Turns out the enclosure device in Peter's system reports a byteswapped
page length for VPD page 0. It reports "02 00" as page length instead
of "00 02". This causes us to attempt to access 516 bytes (page length
+ header) of information despite only 2 pages being present.
Limit the page search scope to the size of our VPD buffer to guard
against devices returning a larger page count than requested.
Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com
Fixes: b5fc07a5fb ("scsi: core: Consult supported VPD page list prior to fetching page")
Cc: stable@vger.kernel.org
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0eafc58f21 upstream.
The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s
shares the VCC33 supply with other peripherals that may remain powered
during suspend (e.g. when enabled as wakeup sources).
The reset line is also wired so that it can be left deasserted when the
supply is off.
This is important as it avoids holding the controller in reset for
extended periods of time when it remains powered, which can lead to
increased power consumption, and also avoids leaking current through the
X13s reset circuitry during suspend (and after driver unbind).
Use the new 'no-reset-on-power-off' devicetree property to determine
when reset needs to be asserted on power down.
Notably this also avoids wasting power on machine variants without a
touchscreen for which the driver would otherwise exit probe with reset
asserted.
Fixes: bd3cba00dc ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Cc: <stable@vger.kernel.org> # 6.0
Cc: Douglas Anderson <dianders@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f858bbf04 upstream.
There is an issue with ACPI overlay table removal specifically related
to I2C multiplexers.
Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an
existing I2C bus. When this table is loaded we see the creation of a
device for the overall PCA9548 chip and 8 further devices - one
i2c_adapter each for the mux channels. These are all bound to their
ACPI equivalents via an eventual invocation of acpi_bind_one().
When we unload the SSDT overlay we run into the problem. The ACPI
devices are deleted as normal via acpi_device_del_work_fn() and the
acpi_device_del_list.
However, the following warning and stack trace is output as the
deletion does not go smoothly:
------------[ cut here ]------------
kernfs: can not remove 'physical_node', no directory
WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1
Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023
Workqueue: kacpi_hotplug acpi_device_del_work_fn
RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0
Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000
RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780
RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff
R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50
R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8
FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0
Call Trace:
<TASK>
? kernfs_remove_by_name_ns+0xb9/0xc0
? __warn+0x7c/0x130
? kernfs_remove_by_name_ns+0xb9/0xc0
? report_bug+0x171/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? kernfs_remove_by_name_ns+0xb9/0xc0
? kernfs_remove_by_name_ns+0xb9/0xc0
acpi_unbind_one+0x108/0x180
device_del+0x18b/0x490
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
device_unregister+0xd/0x30
i2c_del_adapter.part.0+0x1bf/0x250
i2c_mux_del_adapters+0xa1/0xe0
i2c_device_remove+0x1e/0x80
device_release_driver_internal+0x19a/0x200
bus_remove_device+0xbf/0x100
device_del+0x157/0x490
? __pfx_device_match_fwnode+0x10/0x10
? srso_return_thunk+0x5/0x5f
device_unregister+0xd/0x30
i2c_acpi_notify+0x10f/0x140
notifier_call_chain+0x58/0xd0
blocking_notifier_call_chain+0x3a/0x60
acpi_device_del_work_fn+0x85/0x1d0
process_one_work+0x134/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe3/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
---[ end trace 0000000000000000 ]---
...
repeated 7 more times, 1 for each channel of the mux
...
The issue is that the binding of the ACPI devices to their peer I2C
adapters is not correctly cleaned up. Digging deeper into the issue we
see that the deletion order is such that the ACPI devices matching the
mux channel i2c adapters are deleted first during the SSDT overlay
removal. For each of the channels we see a call to i2c_acpi_notify()
with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not
actually i2c_clients, nothing is done for them.
Later on, after each of the mux channels has been dealt with, we come
to delete the i2c_client representing the PCA9548 device. This is the
call stack we see above, whereby the kernel cleans up the i2c_client
including destruction of the mux and its channel adapters. At this
point we do attempt to unbind from the ACPI peers but those peers no
longer exist and so we hit the kernfs errors.
The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But,
given that the life cycle of the adapters is linked to the i2c_client,
instead of deleting the i2c_adapters during the i2c_acpi_notify(), we
just trigger unbinding of the ACPI device from the adapter device, and
allow the clean up of the adapter to continue in the way it always has.
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 525e6fabea ("i2c / ACPI: add support for ACPI reconfigure notifications")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e527d5841 upstream.
Since commit (5d8edfb900 "iomap: Copy larger chunks from userspace"),
iomap will try to copy in larger chunks than PAGE_SIZE. However, if the
mapping doesn't support large folio, only one page of maximum 4KB will
be created and 4KB data will be writen to pagecache each time. Then,
next 4KB will be handled in next iteration. This will cause potential
write performance problem.
If chunk is 2MB, total 512 pages need to be handled finally. During this
period, fault_in_iov_iter_readable() is called to check iov_iter readable
validity. Since only 4KB will be handled each time, below address space
will be checked over and over again:
start end
-
buf, buf+2MB
buf+4KB, buf+2MB
buf+8KB, buf+2MB
...
buf+2044KB buf+2MB
Obviously the checking size is wrong since only 4KB will be handled each
time. So this will get a correct chunk to let iomap work well in non-large
folio case.
With this change, the write speed will be stable. Tested on ARM64 device.
Before:
- dd if=/dev/zero of=/dev/sda bs=400K count=10485 (334 MB/s)
- dd if=/dev/zero of=/dev/sda bs=800K count=5242 (278 MB/s)
- dd if=/dev/zero of=/dev/sda bs=1600K count=2621 (204 MB/s)
- dd if=/dev/zero of=/dev/sda bs=2200K count=1906 (170 MB/s)
- dd if=/dev/zero of=/dev/sda bs=3000K count=1398 (150 MB/s)
- dd if=/dev/zero of=/dev/sda bs=4500K count=932 (139 MB/s)
After:
- dd if=/dev/zero of=/dev/sda bs=400K count=10485 (339 MB/s)
- dd if=/dev/zero of=/dev/sda bs=800K count=5242 (330 MB/s)
- dd if=/dev/zero of=/dev/sda bs=1600K count=2621 (332 MB/s)
- dd if=/dev/zero of=/dev/sda bs=2200K count=1906 (333 MB/s)
- dd if=/dev/zero of=/dev/sda bs=3000K count=1398 (333 MB/s)
- dd if=/dev/zero of=/dev/sda bs=4500K count=932 (333 MB/s)
Fixes: 5d8edfb900 ("iomap: Copy larger chunks from userspace")
Cc: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240521114939.2541461-2-xu.yang_2@nxp.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79c1374548 upstream.
Add mapping_max_folio_size() to get the maximum folio size for this
pagecache mapping.
Fixes: 5d8edfb900 ("iomap: Copy larger chunks from userspace")
Cc: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240521114939.2541461-1-xu.yang_2@nxp.com
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a5a8d343e upstream.
__split_huge_pmd_locked() can be called for a present THP, devmap or
(non-present) migration entry. It calls pmdp_invalidate() unconditionally
on the pmdp and only determines if it is present or not based on the
returned old pmd. This is a problem for the migration entry case because
pmd_mkinvalid(), called by pmdp_invalidate() must only be called for a
present pmd.
On arm64 at least, pmd_mkinvalid() will mark the pmd such that any future
call to pmd_present() will return true. And therefore any lockless
pgtable walker could see the migration entry pmd in this state and start
interpretting the fields as if it were present, leading to BadThings (TM).
GUP-fast appears to be one such lockless pgtable walker.
x86 does not suffer the above problem, but instead pmd_mkinvalid() will
corrupt the offset field of the swap entry within the swap pte. See link
below for discussion of that problem.
Fix all of this by only calling pmdp_invalidate() for a present pmd. And
for good measure let's add a warning to all implementations of
pmdp_invalidate[_ad](). I've manually reviewed all other
pmdp_invalidate[_ad]() call sites and believe all others to be conformant.
This is a theoretical bug found during code review. I don't have any test
case to trigger it in practice.
Link: https://lkml.kernel.org/r/20240501143310.1381675-1-ryan.roberts@arm.com
Link: https://lore.kernel.org/all/0dd7827a-6334-439a-8fd0-43c98e6af22b@arm.com/
Fixes: 84c3fc4e9c ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aba091547e upstream.
There is an issue in clang's ThinLTO caching (enabled for the kernel via
'--thinlto-cache-dir') with .incbin, which the kernel occasionally uses
to include data within the kernel, such as the .config file for
/proc/config.gz. For example, when changing the .config and rebuilding
vmlinux, the copy of .config in vmlinux does not match the copy of
.config in the build folder:
$ echo 'CONFIG_LTO_NONE=n
CONFIG_LTO_CLANG_THIN=y
CONFIG_IKCONFIG=y
CONFIG_HEADERS_INSTALL=y' >kernel/configs/repro.config
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config vmlinux
...
$ grep CONFIG_HEADERS_INSTALL .config
CONFIG_HEADERS_INSTALL=y
$ scripts/extract-ikconfig vmlinux | grep CONFIG_HEADERS_INSTALL
CONFIG_HEADERS_INSTALL=y
$ scripts/config -d HEADERS_INSTALL
$ make -kj"$(nproc)" ARCH=x86_64 LLVM=1 vmlinux
...
UPD kernel/config_data
GZIP kernel/config_data.gz
CC kernel/configs.o
...
LD vmlinux
...
$ grep CONFIG_HEADERS_INSTALL .config
# CONFIG_HEADERS_INSTALL is not set
$ scripts/extract-ikconfig vmlinux | grep CONFIG_HEADERS_INSTALL
CONFIG_HEADERS_INSTALL=y
Without '--thinlto-cache-dir' or when using full LTO, this issue does
not occur.
Benchmarking incremental builds on a few different machines with and
without the cache shows a 20% increase in incremental build time without
the cache when measured by touching init/main.c and running 'make all'.
ARCH=arm64 defconfig + CONFIG_LTO_CLANG_THIN=y on an arm64 host:
Benchmark 1: With ThinLTO cache
Time (mean ± σ): 56.347 s ± 0.163 s [User: 83.768 s, System: 24.661 s]
Range (min … max): 56.109 s … 56.594 s 10 runs
Benchmark 2: Without ThinLTO cache
Time (mean ± σ): 67.740 s ± 0.479 s [User: 718.458 s, System: 31.797 s]
Range (min … max): 67.059 s … 68.556 s 10 runs
Summary
With ThinLTO cache ran
1.20 ± 0.01 times faster than Without ThinLTO cache
ARCH=x86_64 defconfig + CONFIG_LTO_CLANG_THIN=y on an x86_64 host:
Benchmark 1: With ThinLTO cache
Time (mean ± σ): 85.772 s ± 0.252 s [User: 91.505 s, System: 8.408 s]
Range (min … max): 85.447 s … 86.244 s 10 runs
Benchmark 2: Without ThinLTO cache
Time (mean ± σ): 103.833 s ± 0.288 s [User: 232.058 s, System: 8.569 s]
Range (min … max): 103.286 s … 104.124 s 10 runs
Summary
With ThinLTO cache ran
1.21 ± 0.00 times faster than Without ThinLTO cache
While it is unfortunate to take this performance improvement off the
table, correctness is more important. If/when this is fixed in LLVM, it
can potentially be brought back in a conditional manner. Alternatively,
a developer can just disable LTO if doing incremental compiles quickly
is important, as a full compile cycle can still take over a minute even
with the cache and it is unlikely that LTO will result in functional
differences for a kernel change.
Cc: stable@vger.kernel.org
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Reported-by: Yifan Hong <elsk@google.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2021
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Closes: https://lore.kernel.org/r/20220327115526.cc4b0ff55fc53c97683c3e4d@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3b17c6d9d upstream.
Using completion_done to determine whether the caller has gone
away only works after a complete call. Furthermore it's still
possible that the caller has not yet called wait_for_completion,
resulting in another potential UAF.
Fix this by making the caller use cancel_work_sync and then freeing
the memory safely.
Fixes: 7d42e09760 ("crypto: qat - resolve race condition during AER recovery")
Cc: <stable@vger.kernel.org> #6.8+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb5739a1ef upstream.
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.
The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.
Steps to test:
1. Cert is generated usings ima-evm-utils test suite with
`gen-keys.sh`, example cert is provided below:
$ base64 -d >test-gost2012_512-A.cer <<EOF
MIIB/DCCAWagAwIBAgIUK8+whWevr3FFkSdU9GLDAM7ure8wDAYIKoUDBwEBAwMFADARMQ8wDQYD
VQQDDAZDQSBLZXkwIBcNMjIwMjAxMjIwOTQxWhgPMjA4MjEyMDUyMjA5NDFaMBExDzANBgNVBAMM
BkNBIEtleTCBoDAXBggqhQMHAQEBAjALBgkqhQMHAQIBAgEDgYQABIGALXNrTJGgeErBUOov3Cfo
IrHF9fcj8UjzwGeKCkbCcINzVUbdPmCopeJRHDJEvQBX1CQUPtlwDv6ANjTTRoq5nCk9L5PPFP1H
z73JIXHT0eRBDVoWy0cWDRz1mmQlCnN2HThMtEloaQI81nTlKZOcEYDtDpi5WODmjEeRNQJMdqCj
UDBOMAwGA1UdEwQFMAMBAf8wHQYDVR0OBBYEFCwfOITMbE9VisW1i2TYeu1tAo5QMB8GA1UdIwQY
MBaAFCwfOITMbE9VisW1i2TYeu1tAo5QMAwGCCqFAwcBAQMDBQADgYEAmBfJCMTdC0/NSjz4BBiQ
qDIEjomO7FEHYlkX5NGulcF8FaJW2jeyyXXtbpnub1IQ8af1KFIpwoS2e93LaaofxpWlpQLlju6m
KYLOcO4xK3Whwa2hBAz9YbpUSFjvxnkS2/jpH2MsOSXuUEeCruG/RkHHB3ACef9umG6HCNQuAPY=
EOF
2. Optionally, trace module requests with: trace-cmd stream -e module &
3. Trigger add_key call for the cert:
# keyctl padd asymmetric "" @u <test-gost2012_512-A.cer
939910969
# lsmod | head -3
Module Size Used by
ecrdsa_generic 16384 0
streebog_generic 28672 0
Repored-by: Paul Wolneykien <manowar@altlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48e4fd6d54 upstream.
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.
The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.
Steps to test:
1. Create certificate
openssl req -x509 -sha256 -newkey ec \
-pkeyopt "ec_paramgen_curve:secp384r1" -keyout key.pem -days 365 \
-subj '/CN=test' -nodes -outform der -out nist-p384.der
2. Optionally, trace module requests with: trace-cmd stream -e module &
3. Trigger add_key call for the cert:
# keyctl padd asymmetric "" @u < nist-p384.der
641069229
# lsmod | head -2
Module Size Used by
ecdsa_generic 16384 0
Fixes: c12d448ba9 ("crypto: ecdsa - Register NIST P384 and extend test suite")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c5b3e17b8 upstream.
The clk_alpha_pll_stromer_set_rate() function writes inproper
values into the ALPHA_VAL{,_U} registers which results in wrong
clock rates when the alpha value is used.
The broken behaviour can be seen on IPQ5018 for example, when
dynamic scaling sets the CPU frequency to 800000 KHz. In this
case the CPU cores are running only at 792031 KHz:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
792031
This happens because the function ignores the fact that the alpha
value calculated by the alpha_pll_round_rate() function is only
32 bits wide which must be extended to 40 bits if it is used on
a hardware which supports 40 bits wide values.
Extend the clk_alpha_pll_stromer_set_rate() function to convert
the alpha value to 40 bits before wrinting that into the registers
in order to ensure that the hardware really uses the requested rate.
After the change the CPU frequency is correct:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
800000
Cc: stable@vger.kernel.org
Fixes: e47a4f55f2 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6dc445c190 upstream.
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
raspberrypi_discover_clocks() due to ->num being assigned after ->hws
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4
index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-2-e2db3b82d5ef@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9368cdf90f upstream.
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer about the number
of elements in hws, so that it can warn when hws is accessed out of
bounds. As noted in that change, the __counted_by member must be
initialized with the number of elements before the first array access
happens, otherwise there will be a warning from each access prior to the
initialization because the number of elements is zero. This occurs in
clk_dvp_probe() due to ->num being assigned after ->hws has been
accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
Move the ->num initialization to before the first access of ->hws, which
clears up the warning.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-1-e2db3b82d5ef@kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1098efd299 upstream.
In JUMP_VIRT_ADDR we are performing an or calculation on address value
directly from pcaddi.
This will only work if we are currently running from direct 1:1 mapping
addresses or firmware's DMW is configured exactly same as kernel. Still,
we should not rely on such assumption.
Fix by overriding higher bits in address comes from pcaddi, so we can
get rid of or operator.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3de9c42d02 upstream.
NUMA enabled kernel on FDT based machine fails to boot because CPUs
are all in NUMA_NO_NODE and mm subsystem won't accept that.
Fix by adding them to default NUMA node at FDT parsing phase and move
numa_add_cpu(0) to a later point.
Cc: stable@vger.kernel.org
Fixes: 88d4d957ed ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c92e8b9eac upstream.
We recently upgraded the view of ESR_EL2 to 64bit, in keeping with
the requirements of the architecture.
However, the AArch32 emulation code was left unaudited, and the
(already dodgy) code that triages whether a trap is spurious or not
(because the condition code failed) broke in a subtle way:
If ESR_EL2.ISS2 is ever non-zero (unlikely, but hey, this is the ARM
architecture we're talking about), the hack that tests the top bits
of ESR_EL2.EC will break in an interesting way.
Instead, use kvm_vcpu_trap_get_class() to obtain the EC, and list
all the possible ECs that can fail a condition code check.
While we're at it, add SMC32 to the list, as it is explicitly listed
as being allowed to trap despite failing a condition code check (as
described in the HCR_EL2.TSC documentation).
Fixes: 0b12620fdd ("KVM: arm64: Treat ESR_EL2 as a 64-bit register")
Cc: stable@vger.kernel.org
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfe6d190f3 upstream.
It appears that we don't allow a vcpu to be restored in AArch32
System mode, as we *never* included it in the list of valid modes.
Just add it to the list of allowed modes.
Fixes: 0d854a60b1 ("arm64: KVM: enable initialization of a 32bit vcpu")
Cc: stable@vger.kernel.org
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 947051e361 upstream.
When userspace writes to one of the core registers, we make
sure to narrow the corresponding GPRs if PSTATE indicates
an AArch32 context.
The code tries to check whether the context is EL0 or EL1 so
that it narrows the correct registers. But it does so by checking
the full PSTATE instead of PSTATE.M.
As a consequence, and if we are restoring an AArch32 EL0 context
in a 64bit guest, and that PSTATE has *any* bit set outside of
PSTATE.M, we narrow *all* registers instead of only the first 15,
destroying the 64bit state.
Obviously, this is not something the guest is likely to enjoy.
Correctly masking PSTATE to only evaluate PSTATE.M fixes it.
Fixes: 90c1f934ed ("KVM: arm64: Get rid of the AArch32 register mapping code")
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240524141956.1450304-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4bd556467 upstream.
When requesting an NMI window, WARN on vNMI support being enabled if and
only if NMIs are actually masked, i.e. if the vCPU is already handling an
NMI. KVM's ABI for NMIs that arrive simultanesouly (from KVM's point of
view) is to inject one NMI and pend the other. When using vNMI, KVM pends
the second NMI simply by setting V_NMI_PENDING, and lets the CPU do the
rest (hardware automatically sets V_NMI_BLOCKING when an NMI is injected).
However, if KVM can't immediately inject an NMI, e.g. because the vCPU is
in an STI shadow or is running with GIF=0, then KVM will request an NMI
window and trigger the WARN (but still function correctly).
Whether or not the GIF=0 case makes sense is debatable, as the intent of
KVM's behavior is to provide functionality that is as close to real
hardware as possible. E.g. if two NMIs are sent in quick succession, the
probability of both NMIs arriving in an STI shadow is infinitesimally low
on real hardware, but significantly larger in a virtual environment, e.g.
if the vCPU is preempted in the STI shadow. For GIF=0, the argument isn't
as clear cut, because the window where two NMIs can collide is much larger
in bare metal (though still small).
That said, KVM should not have divergent behavior for the GIF=0 case based
on whether or not vNMI support is enabled. And KVM has allowed
simultaneous NMIs with GIF=0 for over a decade, since commit 7460fb4a34
("KVM: Fix simultaneous NMIs"). I.e. KVM's GIF=0 handling shouldn't be
modified without a *really* good reason to do so, and if KVM's behavior
were to be modified, it should be done irrespective of vNMI support.
Fixes: fa4c027a79 ("KVM: x86: Add support for SVM's Virtual NMI")
Cc: stable@vger.kernel.org
Cc: Santosh Shukla <Santosh.Shukla@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240522021435.1684366-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd2b75fd9a upstream.
This reverts commit 28ebbb4981.
Revert this commit as apparently the LLVM code to take advantage of
this never landed.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Feifei Xu <feifei.xu@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 267cace556 upstream.
commit cd94d1b182 ("dm/amd/pm: Fix problems with reboot/shutdown for
some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues
that were reported since commit 31729e8c21 ("drm/amd/pm: fixes a
random hang in S4 for SMU v13.0.4/11") but caused issues for some
people.
Adjust the workaround flow to properly only apply in the S4 case:
-> For shutdown go through SMU_MSG_PrepareMp1ForUnload
-> For S4 go through SMU_MSG_GfxDeviceDriverReset and
SMU_MSG_PrepareMp1ForUnload
Reported-and-tested-by: lectrode <electrodexsnet@gmail.com>
Closes: https://github.com/void-linux/void-packages/issues/50417
Cc: stable@vger.kernel.org
Fixes: cd94d1b182 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users")
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c898afdc15 upstream.
Fix a use-after-free on dentry's d_fsdata fid list when a thread
looks up a fid through dentry while another thread unlinks it:
UAF thread:
refcount_t: addition on 0; use-after-free.
p9_fid_get linux/./include/net/9p/client.h:262
v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129
v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181
v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314
v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400
vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248
Freed by:
p9_fid_destroy (inlined)
p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456
p9_fid_put linux/./include/net/9p/client.h:278
v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55
v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518
vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335
The problem is that d_fsdata was not accessed under d_lock, because
d_release() normally is only called once the dentry is otherwise no
longer accessible but since we also call it explicitly in v9fs_remove
that lock is required:
move the hlist out of the dentry under lock then unref its fids once
they are no longer accessible.
Fixes: 154372e67d ("fs/9p: fix create-unlink-getattr idiom")
Cc: stable@vger.kernel.org
Reported-by: Meysam Firouzi
Reported-by: Amirmohammad Eftekhar
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20240521122947.1080227-1-asmadeus@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e64e8f7c17 upstream.
[Why]
The vram width value is 0.
Because the integratedsysteminfo table in VBIOS has updated to 2.3.
[How]
Driver needs a new intergrated info v2.3 table too.
Then the vram width value will be correct.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ad959b670 upstream.
The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero")
checks the value of pixclock to avoid divide-by-zero error. However
the function savagefb_probe doesn't handle the error return of
savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.
Fixes: 04e5eac8f3 ("fbdev: savage: Error out if pixclock equals zero")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87cb4a612a upstream.
Framebuffer memory is allocated via vzalloc() from non-contiguous
physical pages. The physical framebuffer start address is therefore
meaningless. Do not set it.
The value is not used within the kernel and only exported to userspace
on dedicated ARM configs. No functional change is expected.
v2:
- refer to vzalloc() in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a5b44c4adb ("drm/fbdev-generic: Always use shadow buffering")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de
(cherry picked from commit 73ef0aecba78aa9ebd309b10b6cd17d94e632892)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 431946c0f6 upstream.
The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models
stopped working under Linux after commit 6fd03f0248 ("gpiolib: acpi:
support bias pull disable").
The GPIO in question is connected to a mechanical switch in the slot
which shorts the pin to GND when a card is inserted.
The GPIO pin correctly gets configured with a 20K pull-up by the BIOS,
but there is a bug in the DSDT where the GpioInt for the card-detect is
configured with a PullNone setting:
GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710,
"\\_SB.GPO0", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0026
}
Linux now actually honors the PullNone setting and disables the 20K pull-up
configured by the BIOS.
Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls
mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for
the Asus T100TA models to fix this.
Fixes: 6fd03f0248 ("gpiolib: acpi: support bias pull disable")
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef3eab75e1 upstream.
On the Toshiba WT10-A the microSD slot always reports the card being
write-protected, just like on the Toshiba WT8-B.
Add a DMI quirk to work around this.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-6-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3521d7cba upstream.
The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin
and a broken wp pin which always reports the card being write-protected.
Add a DMI quirk to address both issues.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-5-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63a7cd6602 upstream.
Some mmc host drivers may need to fixup a card-detection GPIO's config
to e.g. enable the GPIO controllers builtin pull-up resistor on devices
where the firmware description of the GPIO is broken (e.g. GpioInt with
PullNone instead of PullUp in ACPI DSDT).
Since this is the exception rather then the rule adding a config
parameter to mmc_gpiod_request_cd() seems undesirable, so instead
add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper
to call gpiod_set_config() on the card-detect GPIO acquired through
mmc_gpiod_request_cd().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55c421b364 upstream.
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text)
Fixes: b4cff4549b ("DaVinci: MMC: MMC/SD controller driver for DaVinci family")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d8acd02c4 upstream.
struct v4l2_async_notifier has several list_head members, but only
waiting_list and done_list are initialized. notifier_entry was kept
'zeroed' leading to an uninitialized list_head.
This results in a NULL-pointer dereference if csi2_async_register() fails,
e.g. node for remote endpoint is disabled, and returns -ENOTCONN.
The following calls to v4l2_async_nf_unregister() results in a NULL
pointer dereference.
Add the missing list head initializer.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46bc0234ad upstream.
The V4L2 device used to be set when the notifier was registered but this
has been moved to the notifier initialisation. Don't touch the V4L2 device
if registration fails.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9537a8425a upstream.
The notifier_entry of a notifier is not re-initialised after unregistering
the notifier. This leads to dangling pointers being left there so use
list_del_init() to return the notifier_entry an empty list.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ed4477f2e upstream.
After the new V4L2 device node was registered, some additional
initialization was done before the device node was marked as
'registered'. During the time between creating the device node
and marking it as 'registered' it was possible to open the
device node, which would return -ENODEV since the 'registered'
flag was not yet set.
Hold the videodev_lock mutex from just before the device node
is registered until the 'registered' flag is set. Since v4l2_open
will take the same lock, it will wait until this registration
process is finished. This resolves this race condition.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <stable@vger.kernel.org> # for vi4.18 and up
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 526f452754 upstream.
When building for LoongArch with clang 18.0.0, the stack usage of
probe() is larger than the allowed 2048 bytes:
drivers/media/dvb-frontends/mxl5xx.c:1698:12: warning: stack frame size (2368) exceeds limit (2048) in 'probe' [-Wframe-larger-than]
1698 | static int probe(struct mxl *state, struct mxl5xx_cfg *cfg)
| ^
1 warning generated.
This is the result of the linked LLVM commit, which changes how the
arrays of structures in config_ts() get handled with
CONFIG_INIT_STACK_ZERO and CONFIG_INIT_STACK_PATTERN, which causes the
above warning in combination with inlining, as config_ts() gets inlined
into probe().
This warning can be easily fixed by moving the array of structures off
of the stackvia 'static const', which is a better location for these
variables anyways because they are static data that is only ever read
from, never modified, so allocating the stack space is wasteful.
This drops the stack usage from 2368 bytes to 256 bytes with the same
compiler and configuration.
Link: https://lore.kernel.org/linux-media/20240111-dvb-mxl5xx-move-structs-off-stack-v1-1-ca4230e67c11@kernel.org
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1977
Link: afe8b93ffd
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bc6073615 upstream.
First the media device node was created, and if successful it was
marked as 'registered'. This leaves a small race condition where
an application can open the device node and get an error back
because the 'registered' flag was not yet set.
Change the order: first set the 'registered' flag, then actually
register the media device node. If that fails, then clear the flag.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: cf4b9211b5 ("[media] media: Media device node support")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a9d420149 upstream.
The graph walk tries to follow all links, even if they are not between
pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link.
Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK
links.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # for 6.1 and later
Fixes: ae21987283 ("media: mc: entity: Rewrite media_pipeline_start()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 428a575dc9 upstream.
During boot, Linux kernel complains:
[ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
This SoC is using a regular GIC-400 and the GICR space size should be
8KB rather than 256B.
With this patch:
[ 0.000000] GIC: Using split EOI/Deactivate mode
So this should be the correct fix.
Fixes: 2f20182ed6 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219-cache-v3-1-a33c57534ae9@outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Kacur