After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all pwm drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240909130902.851274-2-u.kleine-koenig@baylibre.com
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/kernel/rtas_flash.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/sysdev/rtc_cmos_setup.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/pseries/papr_scm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/spufs/spufs.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/cbe_thermal.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/cpufreq_spudemand.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/powerpc/platforms/cell/cbe_powerbutton.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes 85xx/t1042rdb_diu.c and chrp/nvram.c which, although
they did not produce a warning with the powerpc allmodconfig
configuration, may cause this warning with other configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240615-md-powerpc-arch-powerpc-v1-1-ba4956bea47a@quicinc.com
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use by glibc.
- Add support for recognising the Power11 architected and raw PVRs.
- Add support for nr_cpus=n on the command line where the boot CPU is >= n.
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches.
- Other small features, cleanups and fixes.
Thanks to: Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan, Li zeming,
Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor, Nicholas Piggin, Peter
Bergner, Qiheng Lin, Randy Dunlap, Ricardo B. Marliere, Rob Herring, Sathvika
Vasireddy, Shrikanth Hegde, Uwe Kleine-König, Vaibhav Jain, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=K9Ok
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
by glibc
- Add support for recognising the Power11 architected and raw PVRs
- Add support for nr_cpus=n on the command line where the
boot CPU is >= n
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches
- Other small features, cleanups and fixes
Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.
* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
powerpc/macio: Make remove callback of macio driver void returned
powerpc/83xx: Fix build failure with FPU=n
powerpc/64s: Fix get_hugepd_cache_index() build failure
powerpc/4xx: Fix warp_gpio_leds build failure
powerpc/amigaone: Make several functions static
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
macintosh/adb: make adb_dev_class constant
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
powerpc/fsl: Fix mfpmr() asm constraint error
powerpc: Remove cpu-as-y completely
powerpc/fsl: Modernise mt/mfpmr
powerpc/fsl: Fix mfpmr build errors with newer binutils
powerpc/64s: Use .machine power4 around dcbt
powerpc/64s: Move dcbt/dcbtst sequence into a macro
powerpc/mm: Code cleanup for __hash_page_thp
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
powerpc/irq: Allow softirq to hardirq stack transition
powerpc: Stop using of_root
powerpc/machdep: Define 'compatibles' property in ppc_md and use it
of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
...
Most probe functions that do not use the 'compatible' string do
nothing else than checking whether the machine is compatible with
one of the strings in a NULL terminated table of strings.
Define that table of strings in ppc_md structure and check it directly
from probe_machine() instead of using ppc_md.probe() for that.
Keep checking in ppc_md.probe() only for more complex probing.
All .compatible could be replaced with a single element NULL
terminated list but that's not worth the churn. Can be do incrementaly
in follow-up patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-4-mpe@ellerman.id.au
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1e8396078942d9e46e56d70ed2f749a76391c381.1708529736.git.u.kleine-koenig@pengutronix.de
These functions are either used in only one file and can just be
made static or need an #include statement to avoid a warning:
arch/powerpc/platforms/85xx/mpc8536_ds.c:30:13: error: no previous prototype for 'mpc8536_ds_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1010rdb.c:27:13: error: no previous prototype for 'p1010_rdb_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_ds.c:373:6: error: no previous prototype for 'p1022ds_set_pixel_clock' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_ds.c:422:1: error: no previous prototype for 'p1022ds_valid_monitor_port' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_ds.c:435:13: error: no previous prototype for 'p1022_ds_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_rdk.c:43:6: error: no previous prototype for 'p1022rdk_set_pixel_clock' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_rdk.c:92:1: error: no previous prototype for 'p1022rdk_valid_monitor_port' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_rdk.c:99:13: error: no previous prototype for 'p1022_rdk_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/socrates_fpga_pic.c:273:13: error: no previous prototype for 'socrates_fpga_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/xes_mpc85xx.c:40:13: error: no previous prototype for 'xes_mpc85xx_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/mvme2500.c:24:13: error: no previous prototype for 'mvme2500_pic_init' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240123125148.2004648-2-arnd@kernel.org
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system.
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix
MMU to avoid a broadcast TLBIE flush on exit.
- Drop the exclusion between ptrace/perf watchpoints, and drop the now unused
associated arch hooks.
- Add support for the "nohlt" command line option to disable CPU idle.
- Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1.
- Rework memory block size determination, and support 256MB size on systems
with GPUs that have hotpluggable memory.
- Various other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev,
Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand,
Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin
Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He,
Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara
R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick
Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell
Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav
Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, Zheng Zengkai.
-----BEGIN PGP SIGNATURE-----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=5g7K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Fixup maple/setup.c which needs platform_device]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org
When booting on e6500 with an ELF v2 ABI kernel, the secondary threads do
not start correctly:
[ 0.051118] smp: Bringing up secondary CPUs ...
[ 5.072700] Processor 1 is stuck.
This occurs because the startup code is written to use function
descriptors when loading the entry point for the secondary threads. When
building with ELF v2 ABI there are no function descriptors, and the code
loads junk values for the entry point address.
Fix it by using ppc_function_entry() in C, and DOTSYM() in asm, both of
which work correctly for ELF v2 ABI as well as ELF v1 ABI kernels.
Fixes: 8c5fa3b5c4 ("powerpc/64: Make ELFv2 the default for big-endian builds")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801102650.48705-1-mpe@ellerman.id.au
The MPC8541/8548/8555 Configurable Development System (CDS) were the
vehicle used to provide evaluation of the 1st e500-v2 CPUs around 2007.
Similar to the earlier MPC83xx-MDS systems we removed, the "brains"
exist on a PCI-X card, but additional connectors exist to the right of
the PCI-X slot, two structural metal pins are used to provide stability
in a vertical ATX mounting, and the CPU is now on a daughter-card vs. a
clamped down BGA.
Given the extra complexity and risk of connector damage, the 8548CDS
I had access to came pre-assembled in a basic white Antec case common
for that era, and I'm inclined to assume that was the default.
Power was typical "Pentium4" 2005 ATX - the main 20 pin connector went
to the PCI ATX form factor backplane, and the 4 pin black/yellow went
to the CPU card.
Like previous evaluation boards, they attempted to provide break-out
connectors for as many features as possible, and that made for a fairly
complex looking system.
In any case, these are over 15 years old, and fairly complex systems,
originally made for a small group of industry related people, and made
for use where quiet fan operation wasn't important. Given that, it
makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-3-paul.gortmaker@windriver.com
Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.
Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.
As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.
In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.
Given that, it makes sense to remove support from them in 2023.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
Generic unified P2020 machine description which supports all P2020-based
boards is now in separate file p2020.c. So create a separate config option
CONFIG_PPC_P2020 for it.
Previously machine descriptions for P2020 boards were enabled by
CONFIG_MPC85xx_DS or CONFIG_MPC85xx_RDB option. So set CONFIG_PPC_P2020 to
be enabled by default when one of those option is enabled.
This allows to compile support for P2020 boards without need to have
enabled support for older mpc85xx boards. And to compile kernel for old
mpc85xx boards without having enabled support for new P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-13-pali@kernel.org
Combine machine descriptions and code of all P2020 boards into just one
generic unified P2020 machine description. This allows kernel to boot on
any P2020-based board with P2020 DTS file without need to patch kernel and
define a new machine description in 85xx powerpc platform directory.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-12-pali@kernel.org
Make just one .setup_arch and one .init_IRQ callback implementation for all
P2020 board code. This deduplicate repeated and same code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-11-pali@kernel.org
In order to share mpc85xx i8259 code between DS and P2020.
Prefix i8259 debug and error messages by i8259 word.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix some coding style warnings in the moved code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-10-pali@kernel.org
This moves P2020 RDB machine descriptions into new p2020.c source file.
This is preparation for code de-duplication and providing one unified
machine description for all P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-9-pali@kernel.org
This moves P2020 DS machine descriptions into new p2020.c source file.
This is preparation for code de-duplication and providing one unified
machine description for all P2020 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-8-pali@kernel.org
mpc85xx_qe_par_io_init() is a stub when CONFIG_QUICC_ENGINE is not set.
CONFIG_UCC_GETH and CONFIG_SERIAL_QE depend on CONFIG_QUICC_ENGINE.
Remove #ifdef CONFIG_QUICC_ENGINE
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-7-pali@kernel.org
All necessary items are declared all the time, no need to use
a #ifdef CONFIG_PPC_I8259.
Refactor CONFIG_PPC_I8259 actions into a dedicated init function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-6-pali@kernel.org
Use pr_debug() instead of printk(KERN_DEBUG
Use pr_err() instead of printk(KERN_ERR
Use pr_info() instead of printk(KERN_INFO or printk("
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-5-pali@kernel.org
No need to BUG() in case mpic_alloc() fails. Use WARN_ON().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-4-pali@kernel.org
Reduce number of lines in the call to mpic_alloc().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-3-pali@kernel.org
DBG() macro is defined at three places while used only
one time at one place.
Replace its only use by a pr_debug() and remove the macro.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408140122.25293-2-pali@kernel.org
Boards provided by CONFIG_MPC85xx_RDB option do not initialize
fsl_uli1575.c driver. So remove explicit select dependency on it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-6-pali@kernel.org
Move uli_init() function into existing driver fsl_uli1575.c file in order
to share its code between more platforms and board files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-5-pali@kernel.org
Function uli_exclude_device() is called only from mpc86xx_exclude_device()
and mpc85xx_exclude_device() functions. Both those functions are same, so
merge its logic directly into the uli_exclude_device() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-4-pali@kernel.org
Function mpc85xx_exclude_device() is installed and used only when
pci_with_uli is fsl_pci_primary. So replace check for pci_with_uli by
fsl_pci_primary in mpc85xx_exclude_device() and move pci_with_uli variable
declaration into function mpc85xx_ds_uli_init() where it is used.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-3-pali@kernel.org
Use a single line for uli_exclude_device().
Add uli_exclude_device() prototype in ppc-pci.h and guard it.
Remove that prototype from mpc85xx_ds.c and mpc86xx_hpcn.c files.
Make uli_pirq_to_irq[] static as it is used only in that file.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230409000812.18904-2-pali@kernel.org
ppc_md.calibrate_decr() is a mandatory item. Its nullity is never
checked so it must be non null on all platforms.
Most platforms define generic_calibrate_decr() as their
ppc_md.calibrate_decr(). Have time_init() call
generic_calibrate_decr() when ppc_md.calibrate_decr() is NULL,
and remove default assignment from all machines.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
Use the new 'compatible' property for simple cases.
checkpatch complains about the new compatible being undocumented
but in reality nothing is new so just ignore it for the time
being.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6cb9865d916231c38401ba34ad1a98c249fae135.1676711562.git.christophe.leroy@csgroup.eu
This patch converts the driver to newer gpiod API, and away from
OF-specific legacy gpio API that we want to stop using.
While at it, let's address a few more issues:
- switch to using dev_info()/pr_info() and friends
- cancel work when unbinding the driver
Note that the original code handled halt GPIO polarity incorrectly:
in halt callback, when line polarity is "low" it would set trigger to
"1" and drive halt line high, which is counter to the annotation.
gpiod API will drive such line low. However I do not see any DTSes
in mainline that have a DT node with "sgy,gpio-halt" compatible.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YzNNznewTyCJiGFz@google.com
e500 idle setup is a bit messy.
e500_idle() is used for PPC32 while book3e_idle() is used for PPC64.
As they are mutually exclusive, call them all e500_idle().
Use CONFIG_MPC_85xx instead of PPC32 + E500 in Makefile and rename
idle_e500.c to idle_85xx.c .
Rename idle_book3e.c to idle_64e.c and remove #ifdef PPC64 in
as it's only built on PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8039301334e948974c85ec5ef2db37751075185b.1663606876.git.christophe.leroy@csgroup.eu
PPC_85xx and PPC_BOOK3E_64 already select E500 so no need
to select it again by PPC_QEMU_E500 and CORENET_GENERIC
as they depend on PPC_85xx || PPC_BOOK3E_64.
PPC_BOOK3E_64 already selects E500MC so no need to
select it again by PPC_QEMU_E500 if PPC64, PPC_BOOK3E_64
is the only way into PPC_QEMU_E500 with PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/44f03fa1506892fabf626dceb2f47a049908b6af.1663606876.git.christophe.leroy@csgroup.eu
for_each_node_by_type() will automatically increase and decrease
the refcount during the iteration. However, there is a reference
escaped into global 'fsl_pci_primary' and we need to handle it.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220701140119.245435-1-windhl@126.com
In gpio_halt_probe(), of_find_matching_node() will return a node
pointer with refcount incremented. The reference should be dropped with
of_node_put() in the failure path.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220617105011.4041123-1-windhl@126.com
In ksi8560_setup_arch(), of_find_compatible_node() will return a
node pointer with refcount incremented. The reference should be dropped
with of_node_put() when it is not used anymore.
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220616132922.3987053-1-windhl@126.com
More MPC85xx and P1/P2 boards options have incorrect description. Fix them
to include list of all boards for which they enable/disable support.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220709124305.17559-1-pali@kernel.org
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
In smp_85xx_start_cpu() we are passed an address but we're unsure if
it's a real or virtual address, so there's a check to determine that.
The check has an off-by-one in that it tests if the address is greater
than high_memory, but high_memory is the first address of high memory,
so the check should be greater-or-equal.
It seems this has never been a problem in practice, but it also triggers
the DEBUG_VIRTUAL checks in __pa() which we would like to avoid. We can
fix both issues by converting high_memory - 1 to a physical address and
testing against that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-3-mpe@ellerman.id.au
