Although the RCU CPU stall notifiers can be useful for dumping state when
tracking down delicate forward-progress bugs where NUMA effects cause
cache lines to be delivered to a given CPU regularly, but always in a
state that prevents that CPU from making forward progress. These bugs can
be detected by the RCU CPU stall-warning mechanism, but in some cases,
the stall-warnings printk()s disrupt the forward-progress bug before
any useful state can be obtained.
Unfortunately, the notifier mechanism added by commit 5b404fdaba ("rcu:
Add RCU CPU stall notifier") can make matters worse if used at all
carelessly. For example, if the stall warning was caused by a lock not
being released, then any attempt to acquire that lock in the notifier
will hang. This will prevent not only the notifier from producing any
useful output, but it will also prevent the stall-warning message from
ever appearing.
This commit therefore hides this new RCU CPU stall notifier
mechanism under a new RCU_CPU_STALL_NOTIFIER Kconfig option that
depends on both DEBUG_KERNEL and RCU_EXPERT. In addition, the
rcupdate.rcu_cpu_stall_notifiers=1 kernel boot parameter must also
be specified. The RCU_CPU_STALL_NOTIFIER Kconfig option's help text
contains a warning and explains the dangers of careless use, recommending
lockless notifier code. In addition, a WARN() is triggered each time
that an attempt is made to register a stall-warning notifier in kernels
built with CONFIG_RCU_CPU_STALL_NOTIFIER=y.
This combination of measures will keep use of this mechanism confined to
debug kernels and away from routine deployments.
[ paulmck: Apply Dan Carpenter feedback. ]
Fixes: 5b404fdaba ("rcu: Add RCU CPU stall notifier")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
The maximum value of RCU CPU stall-warning timeouts has historically been
five minutes (300 seconds). However, the recently introduced expedited
RCU CPU stall-warning timeout is instead limited to 21 seconds. This
causes problems for CI/fuzzing services such as syzkaller by obscuring
the issue in question with expedited RCU CPU stall-warning timeout splats.
This commit therefore sets the RCU_EXP_CPU_STALL_TIMEOUT Kconfig options
upper bound to 300000 milliseconds, which is 300 seconds (AKA 5 minutes).
[ paulmck: Apply feedback from Hillf Danton. ]
[ paulmck: Apply feedback from Geert Uytterhoeven. ]
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because RCU CPU stall warnings are driven from the scheduling-clock
interrupt handler, a workload consisting of a very large number of
short-duration hardware interrupts can result in misleading stall-warning
messages. On systems supporting only a single level of interrupts,
that is, where interrupts handlers cannot be interrupted, this can
produce misleading diagnostics. The stack traces will show the
innocent-bystander interrupted task, not the interrupts that are
at the very least exacerbating the stall.
This situation can be improved by displaying the number of interrupts
and the CPU time that they have consumed. Diagnosing other types
of stalls can be eased by also providing the count of softirqs and
the CPU time that they consumed as well as the number of context
switches and the task-level CPU time consumed.
Consider the following output given this change:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-....: (1250 ticks this GP) <omitted>
rcu: hardirqs softirqs csw/system
rcu: number: 624 45 0
rcu: cputime: 69 1 2425 ==> 2500(ms)
This output shows that the number of hard and soft interrupts is small,
there are no context switches, and the system takes up a lot of time. This
indicates that the current task is looping with preemption disabled.
The impact on system performance is negligible because snapshot is
recorded only once for all continuous RCU stalls.
This added debugging information is suppressed by default and can be
enabled by building the kernel with CONFIG_RCU_CPU_STALL_CPUTIME=y or
by booting with rcupdate.rcu_cpu_stall_cputime=1.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels configured with CONFIG_PRINTK=n and CONFIG_SRCU=n get build
failures. This causes trouble for deep embedded systems. But given
that there are more than 25 instances of "select SRCU" in the kernel,
it is hard to believe that there are many kernels running in production
without SRCU. This commit therefore makes SRCU mandatory. The SRCU
Kconfig option remains for backwards compatibility, and will be removed
when it is no longer used.
[ paulmck: Update per kernel test robot feedback. ]
Reported-by: John Ogness <john.ogness@linutronix.de>
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
The RCU_STRICT_GRACE_PERIOD Kconfig option does nothing in kernels
built with CONFIG_TINY_RCU=y, so this commit adjusts the dependencies
to disallow this combination.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
The ANDROID config symbol is only used to guard the binder config
symbol and to inject completely random config changes. Remove it
as it is obviously a bad idea.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629150102.1582425-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently both expedited and regular grace period stall warnings use
a single timeout value that with units of seconds. However, recent
Android use cases problem require a sub-100-millisecond expedited RCU CPU
stall warning. Given that expedited RCU grace periods normally complete
in far less than a single millisecond, especially for small systems,
this is not unreasonable.
Therefore introduce the CONFIG_RCU_EXP_CPU_STALL_TIMEOUT kernel
configuration that defaults to 20 msec on Android and remains the same
as that of the non-expedited stall warnings otherwise. It also can be
changed in run-time via: /sys/.../parameters/rcu_exp_cpu_stall_timeout.
[ paulmck: Default of zero to use CONFIG_RCU_STALL_TIMEOUT. ]
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_RCU_STRICT_GRACE_PERIOD=y can experience
significant lock contention due to RCU's resulting focus on ending grace
periods as soon as possible. This is OK, but only if there are not very
many CPUs. This commit therefore puts this Kconfig option off-limits
to systems with more than four CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
People running automated tests have asked for a way to make RCU minimize
grace-period duration in order to increase the probability of KASAN
detecting a pointer being improperly leaked from an RCU read-side critical
section, for example, like this:
rcu_read_lock();
p = rcu_dereference(gp);
do_something_with(p); // OK
rcu_read_unlock();
do_something_else_with(p); // BUG!!!
The rcupdate.rcu_expedited boot parameter is a start in this direction,
given that it makes calls to synchronize_rcu() instead invoke the faster
(and more wasteful) synchronize_rcu_expedited(). However, this does
nothing to shorten RCU grace periods that are instead initiated by
call_rcu(), and RCU pointer-leak bugs can involve call_rcu() just as
surely as they can synchronize_rcu().
This commit therefore adds a RCU_STRICT_GRACE_PERIOD Kconfig option
that will be used to shorten normal (non-expedited) RCU grace periods.
This commit also dumps out a message when this option is in effect.
Later commits will actually shorten grace periods.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of rcuperf with the kernel's perf
feature by renaming kernel/rcu/rcuperf.c to kernel/rcu/rcuscale.c, and
also by similarly renaming the functions and variables inside this file.
This has the side effect of changing the names of the kernel boot
parameters, so kernel-parameters.txt and ver_functions.sh are also
updated. The rcutorture --torture type was also updated from rcuperf
to rcuscale.
[ paulmck: Fix bugs located by Stephen Rothwell. ]
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The old Kconfig option name is all too easy to conflate with the
unrelated "perf" feature, so this commit renames RCU_REF_PERF_TEST to
RCU_REF_SCALE_TEST.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a test for comparing the performance of RCU with various read-side
synchronization mechanisms. The test has proved useful for collecting
data and performing these comparisons.
Currently RCU, SRCU, reader-writer lock, reader-writer semaphore and
reference counting can be measured using refperf.perf_type parameter.
Each invocation of the test runs measures performance of a specific
mechanism.
The maximum number of CPUs to concurrently run readers on is chosen by
the test itself and is 75% of the total number of CPUs. So if you had 24
CPUs, the test runs with a maximum of 18 parallel readers.
A number of experiments are conducted, and in each experiment, the
number of readers is increased by 1, upto the 75% of CPUs mark. During
each experiment, all readers execute an empty loop with refperf.loops
iterations and time the total loop duration. This is then averaged.
Example output:
Parameters "refperf.perf_type=srcu refperf.loops=2000000" looks like:
[ 3.347133] srcu-ref-perf:
[ 3.347133] Threads Time(ns)
[ 3.347133] 1 36
[ 3.347133] 2 34
[ 3.347133] 3 34
[ 3.347133] 4 34
[ 3.347133] 5 33
[ 3.347133] 6 33
[ 3.347133] 7 33
[ 3.347133] 8 33
[ 3.347133] 9 33
[ 3.347133] 10 33
[ 3.347133] 11 33
[ 3.347133] 12 33
[ 3.347133] 13 33
[ 3.347133] 14 33
[ 3.347133] 15 32
[ 3.347133] 16 33
[ 3.347133] 17 33
[ 3.347133] 18 34
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds RCU-reader checks to list_for_each_entry_rcu() and
hlist_for_each_entry_rcu(). These checks are optional, and are indicated
by a lockdep expression passed to a new optional argument to these two
macros. If this optional lockdep expression is omitted, these two macros
act as before, checking for an RCU read-side critical section.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Update to eliminate return within macro and update comment. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RCU's debugging Kconfig options are in the unintuitive location
lib/Kconfig.debug, and there are enough of them that it would be good for
them to be more centralized. This commit therefore extracts RCU's Kconfig
options from init/Kconfig into a new kernel/rcu/Kconfig.debug file.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney