Another ambiguous use of strncpy() is to copy from strings that may not
be NUL-terminated. These cases depend on having the destination buffer
be explicitly larger than the source buffer's maximum size, having
the size of the copy exactly match the source buffer's maximum size,
and for the destination buffer to get explicitly NUL terminated.
This usually happens when parsing protocols or hardware character arrays
that are not guaranteed to be NUL-terminated. The code pattern is
effectively this:
char dest[sizeof(src) + 1];
strncpy(dest, src, sizeof(src));
dest[sizeof(dest) - 1] = '\0';
In practice it usually looks like:
struct from_hardware {
...
char name[HW_NAME_SIZE] __nonstring;
...
};
struct from_hardware *p = ...;
char name[HW_NAME_SIZE + 1];
strncpy(name, p->name, HW_NAME_SIZE);
name[NW_NAME_SIZE] = '\0';
This cannot be replaced with:
strscpy(name, p->name, sizeof(name));
because p->name is smaller and not NUL-terminated, so FORTIFY will
trigger when strnlen(p->name, sizeof(name)) is used. And it cannot be
replaced with:
strscpy(name, p->name, sizeof(p->name));
because then "name" may contain a 1 character early truncation of
p->name.
Provide an unambiguous interface for converting a maybe not-NUL-terminated
string to a NUL-terminated string, with compile-time buffer size checking
so that it can never fail at runtime: memtostr() and memtostr_pad(). Also
add KUnit tests for both.
Link: https://lore.kernel.org/r/20240410023155.2100422-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The KUnit convention for test names is AREA_test_WHAT. Adjust the string
test names to follow this pattern.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240419140155.3028912-5-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Move the strcat() tests into string_kunit.c. Remove the separate
Kconfig and Makefile rule.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240419140155.3028912-4-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The test naming convention differs between string_kunit.c and
strcat_kunit.c. Move "test" to the beginning of the function name.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240419140155.3028912-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Move the strscpy() tests into string_kunit.c. Remove the separate
Kconfig and Makefile rule.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240419140155.3028912-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for moving the strscpy_kunit.c tests into string_kunit.c,
rename "tc" to "strscpy_check" for better readability.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20240419140155.3028912-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
- Fix potential static_command_line buffer overrun. Currently we allocate
the memory for static_command_line based on "boot_command_line", but it
will copy "command_line" into it. So we use the length of "command_line"
instead of "boot_command_line" (as previously we did).
- Use memblock_free_late() in xbc_exit() instead of memblock_free() after
the buddy system is initialized.
- Fix a kerneldoc warning.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmYgN1kbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b/yEH/1FFgb7UJDtQLbtHl5/b
bcxLbSzfb/N37Bc+sE/AKZYrt5QAMjaOmdtzQz9kdLtycxWcQinne4jqGxd6zfTU
UIisfDjEZr46/Rs5sJg+5i8wWrud1TJOmlMsqiSVcorl0f/wE4S7PqgYXRNWZ0p+
KipjuCCV43ITmVjsiq2NxfZGDaWzow/EJXwZzpQkJE1zaU13w2nzgzg64JW3f/lf
Dx/o9jlYEoLkCjiQJ6XaRuTpHbPP1grozSMbvE3z1WnxCaiFHlzXGi6WUhto+pTu
vt/pUrIFYE7k0IFHAVEgBjOkfCm5y9FwOdPLqwy3harQ5ek9D6h6bFnDhbZw7I27
6V8=
=e2c5
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Fix potential static_command_line buffer overrun.
Currently we allocate the memory for static_command_line based on
"boot_command_line", but it will copy "command_line" into it. So we
use the length of "command_line" instead of "boot_command_line" (as
we previously did)
- Use memblock_free_late() in xbc_exit() instead of memblock_free()
after the buddy system is initialized
- Fix a kerneldoc warning
* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix the kerneldoc of _xbc_exit()
bootconfig: use memblock_free_late to free xbc memory to buddy
init/main.c: Fix potential static_command_line memory overflow
Currently, str*cmp functions (strcmp, strncmp, strcasecmp and
strncasecmp) are not covered with tests. Extend the `string_kunit.c`
test by adding the test cases for them.
This patch adds 8 more test cases:
1) strcmp test
2) strcmp test on long strings (2048 chars)
3) strncmp test
4) strncmp test on long strings (2048 chars)
5) strcasecmp test
6) strcasecmp test on long strings
7) strncasecmp test
8) strncasecmp test on long strings
These test cases aim at covering as many edge cases as possible,
including the tests on empty strings, situations when the different
symbol is placed at the end of one of the strings, etc.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240417233033.717596-1-ivan.orlov0322@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently, there are two comments with same name "64-bit ATOMIC magnitudes",
the second one should be "32-bit ATOMIC magnitudes" based on the context.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240415081928.17440-1-cp0613@linux.alibaba.com
With the previous change, struct dqs->stall_thrs will be in the hot path
(at queue side), even if DQS is disabled.
The other fields accessed in this function (last_obj_cnt and num_queued)
are in the first cache line, let's move this field (stall_thrs) to the
very first cache line, since there is a hole there.
This does not change the structure size, since it moves an short (2
bytes) to 4-bytes whole in the first cache line.
This is the new structure format now:
struct dql {
unsigned int num_queued;
unsigned int last_obj_cnt;
...
short unsigned int stall_thrs;
/* XXX 2 bytes hole, try to pack */
...
/* --- cacheline 1 boundary (64 bytes) --- */
...
/* Longest stall detected, reported to user */
short unsigned int stall_max;
/* XXX 2 bytes hole, try to pack */
};
Also, read the stall_thrs (now in the very first cache line) earlier,
together with dql->num_queued (also in the first cache line).
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240411192241.2498631-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following softlockup is caused by interrupt storm, but it cannot be
identified from the call tree. Because the call tree is just a snapshot
and doesn't fully capture the behavior of the CPU during the soft lockup.
watchdog: BUG: soft lockup - CPU#28 stuck for 23s! [fio:83921]
...
Call trace:
__do_softirq+0xa0/0x37c
__irq_exit_rcu+0x108/0x140
irq_exit+0x14/0x20
__handle_domain_irq+0x84/0xe0
gic_handle_irq+0x80/0x108
el0_irq_naked+0x50/0x58
Therefore, it is necessary to report CPU utilization during the
softlockup_threshold period (report once every sample_period, for a total
of 5 reportings), like this:
watchdog: BUG: soft lockup - CPU#28 stuck for 23s! [fio:83921]
CPU#28 Utilization every 4s during lockup:
#1: 0% system, 0% softirq, 100% hardirq, 0% idle
#2: 0% system, 0% softirq, 100% hardirq, 0% idle
#3: 0% system, 0% softirq, 100% hardirq, 0% idle
#4: 0% system, 0% softirq, 100% hardirq, 0% idle
#5: 0% system, 0% softirq, 100% hardirq, 0% idle
...
This is helpful in determining whether an interrupt storm has occurred or
in identifying the cause of the softlockup. The criteria for determination
are as follows:
a. If the hardirq utilization is high, then interrupt storm should be
considered and the root cause cannot be determined from the call tree.
b. If the softirq utilization is high, then the call might not necessarily
point at the root cause.
c. If the system utilization is high, then analyzing the root
cause from the call tree is possible in most cases.
The mechanism requires a considerable amount of global storage space
when configured for the maximum number of CPUs. Therefore, adding a
SOFTLOCKUP_DETECTOR_INTR_STORM Kconfig knob that defaults to "yes"
if the max number of CPUs is <= 128.
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Liu Song <liusong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240411074134.30922-5-yaoma@linux.alibaba.com
Current release - new code bugs:
- netfilter: complete validation of user input
- mlx5: disallow SRIOV switchdev mode when in multi-PF netdev
Previous releases - regressions:
- core: fix u64_stats_init() for lockdep when used repeatedly in one file
- ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr
- bluetooth: fix memory leak in hci_req_sync_complete()
- batman-adv: avoid infinite loop trying to resize local TT
- drv: geneve: fix header validation in geneve[6]_xmit_skb
- drv: bnxt_en: fix possible memory leak in bnxt_rdma_aux_device_init()
- drv: mlx5: offset comp irq index in name by one
- drv: ena: avoid double-free clearing stale tx_info->xdpf value
- drv: pds_core: fix pdsc_check_pci_health deadlock
Previous releases - always broken:
- xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
- bluetooth: fix setsockopt not validating user input
- af_unix: clear stale u->oob_skb.
- nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
- drv: virtio_net: fix guest hangup on invalid RSS update
- drv: mlx5e: Fix mlx5e_priv_init() cleanup flow
- dsa: mt7530: trap link-local frames regardless of ST Port State
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=a9bB
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - new code bugs:
- netfilter: complete validation of user input
- mlx5: disallow SRIOV switchdev mode when in multi-PF netdev
Previous releases - regressions:
- core: fix u64_stats_init() for lockdep when used repeatedly in one
file
- ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr
- bluetooth: fix memory leak in hci_req_sync_complete()
- batman-adv: avoid infinite loop trying to resize local TT
- drv: geneve: fix header validation in geneve[6]_xmit_skb
- drv: bnxt_en: fix possible memory leak in
bnxt_rdma_aux_device_init()
- drv: mlx5: offset comp irq index in name by one
- drv: ena: avoid double-free clearing stale tx_info->xdpf value
- drv: pds_core: fix pdsc_check_pci_health deadlock
Previous releases - always broken:
- xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
- bluetooth: fix setsockopt not validating user input
- af_unix: clear stale u->oob_skb.
- nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
- drv: virtio_net: fix guest hangup on invalid RSS update
- drv: mlx5e: Fix mlx5e_priv_init() cleanup flow
- dsa: mt7530: trap link-local frames regardless of ST Port State"
* tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: ena: Set tx_info->xdpf value to NULL
net: ena: Fix incorrect descriptor free behavior
net: ena: Wrong missing IO completions check order
net: ena: Fix potential sign extension issue
af_unix: Fix garbage collector racing against connect()
net: dsa: mt7530: trap link-local frames regardless of ST Port State
Revert "s390/ism: fix receive message buffer allocation"
net: sparx5: fix wrong config being used when reconfiguring PCS
net/mlx5: fix possible stack overflows
net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev
net/mlx5e: RSS, Block XOR hash with over 128 channels
net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit
net/mlx5e: HTB, Fix inconsistencies with QoS SQs number
net/mlx5e: Fix mlx5e_priv_init() cleanup flow
net/mlx5e: RSS, Block changing channels number when RXFH is configured
net/mlx5: Correctly compare pkt reformat ids
net/mlx5: Properly link new fs rules into the tree
net/mlx5: offset comp irq index in name by one
net/mlx5: Register devlink first under devlink lock
net/mlx5: E-switch, store eswitch pointer before registering devlink_param
...
Architectures are required to provide four-byte cmpxchg() and 64-bit
architectures are additionally required to provide eight-byte cmpxchg().
However, there are cases where one-byte cmpxchg() would be extremely
useful. Therefore, provide cmpxchg_emu_u8() that emulates one-byte
cmpxchg() in terms of four-byte cmpxchg().
Note that this emulations is fully ordered, and can (for example) cause
one-byte cmpxchg_relaxed() to incur the overhead of full ordering.
If this causes problems for a given architecture, that architecture is
free to provide its own lighter-weight primitives.
[ paulmck: Apply Marco Elver feedback. ]
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
Link: https://lore.kernel.org/all/0733eb10-5e7a-4450-9b8a-527b97c842ff@paulmck-laptop/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
U64_MAX is not in include/vdso/limits.h, although that isn't noticed on x86
because x86 includes include/linux/limits.h indirectly. However powerpc is
more selective, resulting in the following build error:
In file included from <command-line>:
lib/vdso/gettimeofday.c: In function 'vdso_calc_ns':
lib/vdso/gettimeofday.c:11:33: error: 'U64_MAX' undeclared
11 | # define VDSO_DELTA_MASK(vd) U64_MAX
| ^~~~~~~
Use ULLONG_MAX instead which will work just as well and is in
include/vdso/limits.h.
Fixes: c8e3a8b6f2 ("vdso: Consolidate vdso_calc_delta()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240409062639.3393-1-adrian.hunter@intel.com
Closes: https://lore.kernel.org/all/20240409124905.6816db37@canb.auug.org.au/
Kernel timekeeping is designed to keep the change in cycles (since the last
timer interrupt) below max_cycles, which prevents multiplication overflow
when converting cycles to nanoseconds. However, if timer interrupts stop,
the calculation will eventually overflow.
Add protection against that, enabled by config option
CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT. Check against max_cycles, falling
back to a slower higher precision calculation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-8-adrian.hunter@intel.com
Add CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT in preparation to add
multiplication overflow protection to the VDSO time getter functions.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-4-adrian.hunter@intel.com
Consolidate nanoseconds calculation to simplify and reduce code
duplication.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-3-adrian.hunter@intel.com
Consolidate vdso_calc_delta(), in preparation for further simplification.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240325064023.2997-2-adrian.hunter@intel.com
When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:
lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]
Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.
Fixes: f24a70106d ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3ee34eabac ("lib/stackdepot: fix first entry having a 0-handle")
changed the meaning of the pool_index field to mean "the pool index plus
1". This made the code accessing this field less self-documenting, as
well as causing debuggers such as drgn to not be able to easily remain
compatible with both old and new kernels, because they typically do that
by testing for presence of the new field. Because stackdepot is a
debugging tool, we should make sure that it is debugger friendly.
Therefore, give the field a different name to improve readability as well
as enabling debugger backwards compatibility.
This is needed in 6.9, which would otherwise become an odd release with
the new semantics and old name so debuggers wouldn't recognize the new
semantics there.
Fixes: 3ee34eabac ("lib/stackdepot: fix first entry having a 0-handle")
Link: https://lkml.kernel.org/r/20240402001500.53533-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/Ib3e70c36c1d230dd0a118dc22649b33e768b9f88
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Turns out that due to CONFIG_DEBUG_INFO_BTF_MODULES not having an
explicitly specified "menu item name" in Kconfig, it's basically
impossible to turn it off (see [0]).
This patch fixes the issue by defining menu name for
CONFIG_DEBUG_INFO_BTF_MODULES, which makes it actually adjustable
and independent of CONFIG_DEBUG_INFO_BTF, in the sense that one can
have DEBUG_INFO_BTF=y and DEBUG_INFO_BTF_MODULES=n.
We still keep it as defaulting to Y, of course.
Fixes: 5f9ae91f7c ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAK3+h2xiFfzQ9UXf56nrRRP=p1+iUxGoEP5B+aq9MDT5jLXDSg@mail.gmail.com [0]
Link: https://lore.kernel.org/bpf/20240404220344.3879270-1-andrii@kernel.org
Two failure patterns are seen randomly when running slub_kunit tests with
CONFIG_SLAB_FREELIST_RANDOM and CONFIG_SLAB_FREELIST_HARDENED enabled.
Pattern 1:
# test_clobber_zone: pass:1 fail:0 skip:0 total:1
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:84
Expected 2 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, test_next_pointer() overwrites p[s->offset], but the data
at p[s->offset] is already 0x12.
Pattern 2:
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 2 (0x2)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, p[s->offset] has a value other than 0x12, but one of the
expected failures is nevertheless missing.
Invert data instead of writing a fixed value to corrupt the cache data
structures to fix the problem.
Fixes: 1f9f78b1b3 ("mm/slub, kunit: add a KUnit test for SLUB debugging functionality")
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
CC: Daniel Latypov <dlatypov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
This is one of the drivers with an unused variable that is marked 'const'.
Adding a __used annotation here avoids the warning and lets us enable
the option by default:
lib/test_ubsan.c:137:28: error: unused variable 'skip_ubsan_array' [-Werror,-Wunused-const-variable]
Fixes: 4a26f49b7b ("ubsan: expand tests and reporting")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-3-arnd@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit dc34d50366 ("lib: test_bitmap: add compile-time
optimization/evaluations assertions") initially missed __assign_bit(),
which led to that quite a time passed before I realized it doesn't get
optimized at compilation time. Now that it does, add test for that just
to make sure nothing will break one day.
To make things more interesting, use bitmap_complement() and
bitmap_full(), thus checking their compile-time evaluation as well. And
remove the misleading comment mentioning the workaround removed recently
in favor of adding the whole file to GCov exceptions.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pr_err() messages may be treated as errors by some log readers, so let
us only use them for test failures. For non-error messages, replace them
with pr_info().
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests ensuring that values can be added at arbitrary positions
of the bitmap, including those spanning into the adjacent unsigned
longs.
Two new performance tests, test_bitmap_read_perf() and
test_bitmap_write_perf(), can be used to assess future performance
improvements of bitmap_read() and bitmap_write():
[ 0.431119][ T1] test_bitmap: Time spent in test_bitmap_read_perf: 615253
[ 0.433197][ T1] test_bitmap: Time spent in test_bitmap_write_perf: 916313
(numbers from a Intel(R) Xeon(R) Gold 6154 CPU @ 3.00GHz machine running
QEMU).
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYAlq0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGYqwH/0fb4pRbVtULpiIK
Cs7/e/IWzRRWLBq+Jj2KVVTxwjyiKFNOq6K/CHHnljIWo1yN2CIWeOgbHfTI0WfN
xmBdJP7OtK8MCN9PwwoWhZxMLcyv4pFCERrrkGa7AD+cdN4j/ytQ3mH5V8f/21fd
rnpQSdpgGXB2SSMHd520Y+e56+gxrrTmsDXjZWM08Wt0bbqAWJrjNe58BMz5hI1t
yQtcgYRTdUuZBn5TMkT99lK9EFQslV38YCo7RUP5D0DWXS1jSfWlgnCD1Nc1ziF4
ps/xPdUMDJAc5Tslg/hgJOciSuLqgMzIUsVgZrKysuu3NhwDY1LDWGORmH1t8E8W
RC25950=
=F+01
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
-----BEGIN PGP SIGNATURE-----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=1LW2
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver
(Geert Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZfx/jAAKCRD3ErUQojoP
XxYoAP9EYvCtd+nxlUvnhS4fXUeTCXZJQA+HiXCORm6DGv7lUgD9EatR9b69CLA3
e4LgzGS/9cybv3uUd3S5lFxsatGZnA8=
=DQZN
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver (Geert
Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
* tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: panel-tpo-td043mtea1: Convert sprintf() to sysfs_emit()
fbmon: prevent division by zero in fb_videomode_from_videomode()
fbcon: Increase maximum font width x height to 64 x 128
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
fbdev: mb862xxfb: Fix defined but not used error
fbdev: uvesafb: Convert sprintf/snprintf to sysfs_emit
fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
-----BEGIN PGP SIGNATURE-----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=tFdl
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwsHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynT4ACePcNRAsYrINlOPPKPHimJtyP01yEAn0pZYnj2
0/UpqIqf3HVPu7zsLKTa
=vR9S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues"
* tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
device: core: Log warning for devices pending deferred probe on timeout
driver: core: Use dev_* instead of pr_* so device metadata is added
driver: core: Log probe failure as error and with device metadata
of: property: fw_devlink: Add support for "post-init-providers" property
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
driver core: Adds flags param to fwnode_link_add()
debugfs: fix wait/cancellation handling during remove
device property: Don't use "proxy" headers
device property: Move enum dev_dma_attr to fwnode.h
driver core: Move fw_devlink stuff to where it belongs
driver core: Drop unneeded 'extern' keyword in fwnode.h
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group.
firmware_loader: introduce __free() cleanup hanler
platform-msi: Remove usage of the deprecated ida_simple_xx() API
sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE()
sysfs: Document new "group visible" helpers
sysfs: Fix crash on empty group attributes array
sysfs: Introduce a mechanism to hide static attribute_groups
sysfs: Introduce a mechanism to hide static attribute_groups
...
Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwqow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNegCffxTbsnbMGjWhVrQ326IJx/DFvNMAoI9csigv
m+G3RzefzZLRx8nAma0c
=GMfc
-----END PGP SIGNATURE-----
Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
This reverts commit 4acf1de35f.
Commit d055c6a2cc ("kunit: memcpy: Mark tests as slow using test
attributes") marks slow memcpy unit tests as slow. Since this commit,
the tests can be disabled with a module parameter, and the configuration
option to skip the slow tests is no longer needed. Revert the patch
introducing it.
Cc: David Gow <davidgow@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240314151200.2285314-1-linux@roeck-us.net
Signed-off-by: Kees Cook <keescook@chromium.org>
For opting functions out of sanitizer coverage, the "no_sanitize"
attribute is used, but in GCC this wasn't introduced until GCC 8.
Disable the sanitizer unless we're not using GCC, or it is GCC
version 8 or higher.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403110643.27JXEVCI-lkp@intel.com/
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZfSddgAKCRDfioYZHlFs
Z+QJAQC0DaU/QbziEUFgd6r92nLA9PHLWi2zhjsSjyuJ3kh3IQD+KN0h8IZ+Av05
EOjLw21+ejwJ2dtCDcy2dlSpS6653wc=
=czLR
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"CXL has mechanisms to enumerate the performance characteristics of
memory devices. Those mechanisms allow Linux to build the equivalent
of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
capability is necessary because static ACPI can not represent dynamic
CXL configurations (and reconfigurations).
So, building on the v6.8 work to add "Quality of Service" enumeration,
this update plumbs CXL "access coordinates" (read/write access latency
and bandwidth) in all the same places that ACPI HMAT feeds similar
data. Follow-on patches from the -mm side can then use that data to
feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
drivers/base/.
The other feature update this cycle is support for CXL error injection
via the ACPI EINJ module. That facility enables injection of bus
protocol errors provided the user knows the magic address values to
insert in the interface. To hide that magic, and make this easier to
use, new error injection attributes were added to CXL debugfs. That
interface injects the errors relative to a CXL object rather than
require user tooling to know how to lookup and inject RCRB (Root
Complex Register Block) addresses into the raw EINJ debugfs interface.
It received some helpful review comments from Tony, but no explicit
acks from the ACPI side. The primary user visible change for existing
EINJ users is that they may find that einj.ko was already loaded by
cxl_core.ko. Previously, einj.ko was only loaded on demand.
The usual collection of miscellaneous cleanups are also present this
cycle.
Summary:
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
lib/firmware_table: Provide buffer length argument to cdat_table_parse()
cxl/pci: Get rid of pointer arithmetic reading CDAT table
cxl/pci: Rename DOE mailbox handle to doe_mb
cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
cxl/core: Add CXL EINJ debugfs files
EINJ, Documentation: Update EINJ kernel doc
EINJ: Add CXL error type support
EINJ: Migrate to a platform driver
cxl/region: Deal with numa nodes not enumerated by SRAT
cxl/region: Add memory hotplug notifier for cxl region
cxl/region: Add sysfs attribute for locality attributes of CXL regions
cxl/region: Calculate performance data for a region
cxl: Set cxlmd->endpoint before adding port device
cxl: Move QoS class to be calculated from the nearest CPU
cxl: Split out host bridge access coordinates
cxl: Split out combine_coordinates() for common shared usage
ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
ACPI: HMAT: Introduce 2 levels of generic port access class
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
...
By using bitmaps we actually support whatever size we would want, but
the console currently limits fonts to 64x128 (which gives 60x16 text on
4k screens), so we don't need more for now, and we can easily increase
later.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Helge Deller <deller@gmx.de>
- Fix missing prototype warnings in various places, including switching
to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting
unneeded GENERIC_ISA_DMA.
- Reduce duplicate code by using shared font data, with dependency fixup
in separate commit touching lib/fonts.
- Convert sbus drives to use remove callbacks returning void
- Fix return values of __setup handlers
- Section mismatch fix for grpci pci drivers
- Make the vio bus type constant
- Kconfig cleanups and fixes
- Typo fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCZfQtuhQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy85XAQChTv3muYGiLSyX2r5leQrxZwWNjdiw
W6uc+pM6nCVryAEA+KtjosgriNo7wZViEWqXyYjs/csdEekLpj4U2qBphAg=
=19B/
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Fix missing prototype warnings in various places, including switching
to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting
unneeded GENERIC_ISA_DMA.
- Reduce duplicate code by using shared font data, with dependency
fixup in separate commit touching lib/fonts.
- Convert sbus drives to use remove callbacks returning void
- Fix return values of __setup handlers
- Section mismatch fix for grpci pci drivers
- Make the vio bus type constant
- Kconfig cleanups and fixes
- Typo fixes
* tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
lib/fonts: Allow Sparc console 8x16 font for sparc64 early boot text console
sbus: uctrl: Convert to platform remove callback returning void
sbus: flash: Convert to platform remove callback returning void
sbus: envctrl: Convert to platform remove callback returning void
sbus: display7seg: Convert to platform remove callback returning void
sbus: bbc_i2c: Convert to platform remove callback returning void
sbus: Add prototype for bbc_envctrl_init and bbc_envctrl_cleanup to header
sparc32: Fix section mismatch in leon_pci_grpci
sparc32: Fix parport build with sparc32
sparc32: Do not select GENERIC_ISA_DMA
mtd: maps: sun_uflash: Declare uflash_devinit static
sparc32: Fix build with trapbase
sparc32: Use generic cmpdi2/ucmpdi2 variants
sparc: select FRAME_POINTER instead of redefining it
sparc: vDSO: fix return value of __setup handler
sparc64: NMI watchdog: fix return value of __setup handler
sparc: vio: make vio_bus_type const
sparc: Fix typos
sparc: Use shared font data
sparc: remove obsolete config ARCH_ATU
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
-----BEGIN PGP SIGNATURE-----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=6xnj
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs updates from Kent Overstreet:
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
bcachefs: time_stats: shrink time_stat_buffer for better alignment
bcachefs: time_stats: split stats-with-quantiles into a separate structure
bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
bcachefs: time_stats: add larger units
bcachefs: pull out time_stats.[ch]
bcachefs: reconstruct_alloc cleanup
bcachefs: fix bch_folio_sector padding
bcachefs: Fix btree key cache coherency during replay
bcachefs: Always flush write buffer in delete_dead_inodes()
bcachefs: Fix order of gc_done passes
bcachefs: fix deletion of indirect extents in btree_gc
bcachefs: Prefer struct_size over open coded arithmetic
bcachefs: Kill unused flags argument to btree_split()
bcachefs: Check for writing superblocks with nonsense member seq fields
bcachefs: fix bch2_journal_buf_to_text()
lib/generic-radix-tree.c: Make nodes more reasonably sized
bcachefs: copy_(to|from)_user_errcode()
bcachefs: Split out bkey_types.h
bcachefs: fix lost journal buf wakeup due to improved pipelining
bcachefs: intercept mountoption value for bool type
...
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA
jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh
tKVmvihFxfAhdDthseXcIf1nBjMALwY=
=8rVc
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmXw04sUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vyT3xAAsp5+c2IcbrXpZZM7figwx4y9PPRp
jcQ4AYSGP41xqTUGXUTcVZYvRorSIAFEOz33U0SL1UNxoOZz8j/M6SD58k8a6XRr
9SSPuKja1OKJjONhS1bzrcbVtuzr71ISrECXfLkvW5hY5hvq+3+anMtu3/UIEHu6
M1vVc+basRjjPJNTixMWvVqS3R+4gDAFeBtdZl/D+U6v0v2xOK+81YZqjfZZCw9v
xmdHHK2dKNEdysNoRJ5cafY3b1NnSsrxlHbIhBnKt+7uRSWKD1dHcBQj7wDc/HrX
yBGca+BZBKitXEJM3p5KcWWs4ijaywGw0GSffUIKrN9i6RIfwnxBH9jUbwDngifU
2IR/kLEqdjYi/WnENxIHpQATLyXhXZ8uEnLS0xMlRIA96u3M5B0mrYOZxaN3bo12
A3aE+aPOTw0u1wf7G8dBX6IdYnjZ/ZuR9Q+fVoKpZBvsYUVaKyiKCtKMCNaVirn5
z7nxR1W71ee+35+37KthPXhiw+YtURGz1wBWt+wWUMjBcpIj2bpzU9wQDE9ZMdYt
XJoJcatrRhJzefO3uzd0egft+vwk0xrj5LQEDhMQyDrnBLC4EgI5niKPWqbay5Nx
Cnll01CI82xAnIF6eu7OOuI1nYGtoFcY8rP3hTC85cWN7Xi8SAOLTZZcVTpfBMUr
l2uEll8p+8dZ6IY=
=AP3I
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
this code originally used the page allocator directly, but most code
shouldn't do that - PAGE_SIZE varies with architecture, and slab is
faster.
4k is also on the large side for typical usage, 512 bytes is a better
choice for typical usage that might be somewhat sparse.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Christophe Leroy did most of the work on this release, first with a few
cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error handling for
when set_memory_XX() can fail. This is part of a larger effort to clean
up all these callers which can fail, modules is just part of it.
This has been sitting on linux-next for about a month without issues.
-----BEGIN PGP SIGNATURE-----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=Z9SO
-----END PGP SIGNATURE-----
Merge tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Christophe Leroy did most of the work on this release, first with a
few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
handling for when set_memory_XX() can fail.
This is part of a larger effort to clean up all these callers which
can fail, modules is just part of it"
* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't ignore errors from set_memory_XX()
lib/test_kmod: fix kernel-doc warnings
powerpc: Simplify strict_kernel_rwx_enabled()
modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
init: Declare rodata_enabled and mark_rodata_ro() at all time
module: Change module_enable_{nx/x/ro}() to more explicit names
module: Use set_memory_rox()
There exist card implementations with a CDAT table using a fixed size
buffer, but with entries filled in that do not fill the whole table
length size. Then, the last entry in the CDAT table may not mark the
end of the CDAT table buffer specified by the length field in the CDAT
header. It can be shorter with trailing unused (zero'ed) data. The
actual table length is determined while reading all CDAT entries of
the table with DOE.
If the table is greater than expected (containing zero'ed trailing
data), the CDAT parser fails with:
[ 48.691717] Malformed DSMAS table length: (24:0)
[ 48.702084] [CDAT:0x00] Invalid zero length
[ 48.711460] cxl_port endpoint1: Failed to parse CDAT: -22
In addition, a check of the table buffer length is missing to prevent
an out-of-bound access then parsing the CDAT table.
Hardening code against device returning borked table. Fix that by
providing an optional buffer length argument to
acpi_parse_entries_array() that can be used by cdat_table_parse() to
propagate the buffer size down to its users to check the buffer
length. This also prevents a possible out-of-bound access mentioned.
Add a check to warn about a malformed CDAT table length.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/ZdEnopFO0Tl3t2O1@rric.localdomain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-----BEGIN PGP SIGNATURE-----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=Z413
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"Improve the behavior during panic. The issues were found when testing
the ongoing changes introducing atomic consoles and printk kthreads:
- pr_flush() has to wait for the last reserved record instead of the
last finalized one. Note that records are finalized in random order
when generated by more CPUs in parallel.
- Ignore non-finalized records during panic(). Messages printed on
panic-CPU are always finalized. Messages printed by other CPUs
might never be finalized when the CPUs get stopped.
- Block new printk() calls on non-panic CPUs completely. Backtraces
are printed before entering the panic mode. Later messages would
just mess information printed by the panic CPU.
- Do not take console_lock in console_flush_on_panic() at all. The
original code did try_lock()/console_unlock(). The unlock part
might cause a deadlock when panic() happened in a scheduler code.
- Fix conversion of 64-bit sequence number for 32-bit atomic
operations"
* tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
dump_stack: Do not get cpu_sync for panic CPU
panic: Flush kernel log buffer at the end
printk: Avoid non-panic CPUs writing to ringbuffer
printk: Disable passing console lock owner completely during panic()
printk: ringbuffer: Skip non-finalized records in panic
printk: Wait for all reserved records with pr_flush()
printk: ringbuffer: Cleanup reader terminology
printk: Add this_cpu_in_panic()
printk: For @suppress_panic_printk check for other CPU in panic
printk: ringbuffer: Clarify special lpos values
printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
printk: Use prb_first_seq() as base for 32bit seq macros
printk: Adjust mapping for 32bit seq macros
printk: nbcon: Relocate 32bit seq macros
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
Returning the edit variable is redundant because it is dereferenced right
before it is returned. It would be better to return true.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Link: https://lkml.kernel.org/r/20240307071717.5318-1-r.smirnov@omp.ru
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As indicated in the added comment, the algorithm works better if b is big.
As multiplication is commutative, a and b can be swapped. Do this if a
is bigger than b.
Link: https://lkml.kernel.org/r/20240303092408.662449-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device driver, and
export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation counters
are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to improve
steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to avoid a too
small heap
- Various changes to allow s390 to be compiled with LLVM=1, since ld.lld and
llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful with s390's
FPU code where some users have up to 520 byte stack frames. Clearing such
stack frames (if INIT_STACK_ALL_PATTERN or INIT_STACK_ALL_ZERO is enabled)
before they are used contradicts the intention (performance improvement) of
such code sections.
- Convert switch_to() to an out-of-line function, and use the generic switch_to
header file
- Replace the usage of s390's debug feature with pr_debug() calls within the
zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to C, mainly
by using singe instruction inline assemblies. This increases readability,
but also allows makes it easier to add proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and csum_partial_copy_nocheck() based
on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following problems if
the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses to allow
more than 64k sections. This can break features which use
'-ffunction-sections' and '-fdata-sections', including kpatch-build and
function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of indirection
for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
-----BEGIN PGP SIGNATURE-----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=KZ31
-----END PGP SIGNATURE-----
Merge tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device
driver, and export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation
counters are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to
improve steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to
avoid a too small heap
- Various changes to allow s390 to be compiled with LLVM=1, since
ld.lld and llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful
with s390's FPU code where some users have up to 520 byte stack
frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
intention (performance improvement) of such code sections.
- Convert switch_to() to an out-of-line function, and use the generic
switch_to header file
- Replace the usage of s390's debug feature with pr_debug() calls
within the zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to
C, mainly by using singe instruction inline assemblies. This
increases readability, but also allows makes it easier to add
proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and
csum_partial_copy_nocheck() based on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following
problems if the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses
to allow more than 64k sections. This can break features which
use '-ffunction-sections' and '-fdata-sections', including
kpatch-build and function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
s390/cache: prevent rebuild of shared_cpu_list
s390/crypto: remove retry loop with sleep from PAES pkey invocation
s390/pkey: improve pkey retry behavior
s390/zcrypt: improve zcrypt retry behavior
s390/zcrypt: introduce retries on in-kernel send CPRB functions
s390/ap: introduce mutex to lock the AP bus scan
s390/ap: rework ap_scan_bus() to return true on config change
s390/ap: clarify AP scan bus related functions and variables
s390/ap: rearm APQNs bindings complete completion
s390/configs: increase number of LOCKDEP_BITS
s390/vfio-ap: handle hardware checkstop state on queue reset operation
s390/pai: change sampling event assignment for PMU device driver
s390/boot: fix minor comment style damages
s390/boot: do not check for zero-termination relocation entry
s390/boot: make type of __vmlinux_relocs_64_start|end consistent
s390/boot: sanitize kaslr_adjust_relocs() function prototype
s390/boot: simplify GOT handling
s390: vmlinux.lds.S: fix .got.plt assertion
s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
...
- Micro-optimize local_xchg() and the rtmutex code on x86
- Fix percpu-rwsem contention tracepoints
- Simplify debugging Kconfig dependencies
- Update/clarify the documentation of atomic primitives
- Misc cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=t84c
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Micro-optimize local_xchg() and the rtmutex code on x86
- Fix percpu-rwsem contention tracepoints
- Simplify debugging Kconfig dependencies
- Update/clarify the documentation of atomic primitives
- Misc cleanups
* tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters()
locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix
locking/percpu-rwsem: Trigger contention tracepoints only if contended
locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive
locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint
locking/mutex: Simplify <linux/mutex.h>
locking/qspinlock: Fix 'wait_early' set but not used warning
locking/atomic: scripts: Clarify ordering of conditional atomics
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem3wQAKCRCRxhvAZXjc
otRMAQDeo8qsuuIAcS2KUicKqZR5yMVvrY9r4sQzf7YRcJo5HQD+NQXkKwQuv1VO
OUeScsic/+I+136AgdjWnlEYO5dp0go=
=4WKU
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
This KUnit next update for Linux 6.9-rc1 consists of:
-- fix to make kunit_bus_type const
-- kunit tool change to Print UML command
-- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching
from using a platform_device, to a dedicated bus and device type
used by kunit. kunit devices don't set DMA mask and this caused
regression on some drm tests as they can't allocate DMA buffers.
Fix this problem by setting DMA masks on the kunit device during
initialization.
-- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit
log macros) already use the __printf() gcc attribute to ensure
the format specifiers are valid, but those which could fail the
test, and hence used __kunit_do_failed_assertion() behind the scenes,
did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A 9 patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
-----BEGIN PGP SIGNATURE-----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=ilEb
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
This kselftest next update for Linux 6.9-rc1 consists of:
-- livepatch restructuring to move the module out of lib to be
built as a out-of-tree modules during kselftest build. This
change makes it easier change, debug and rebuild the tests by
running make on the selftests/livepatch directory, which is not
currently possible since the modules on lib/livepatch are build
and installed using the main makefile modules target.
-- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
-- resctrl test restructuring and new non-contiguous CBMs CAT test
-- new ktap_helpers to print diagnostic messages, pass/fail tests
based on exit code, abort test, and finish the test.
-- a new test verify power supply properties.
-- a new ftrace to exercise function tracer across cpu hotplug.
-- timeout increase for mqueue test to allow the test to run on
i3.metal AWS instances.
-- minor spelling corrections in several tests.
-- missing gitignore files and changes to existing gitignore files.
-----BEGIN PGP SIGNATURE-----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=G+DO
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- livepatch restructuring to move the module out of lib to be built as
a out-of-tree modules during kselftest build. This makes it easier
change, debug and rebuild the tests by running make on the
selftests/livepatch directory, which is not currently possible since
the modules on lib/livepatch are build and installed using the main
makefile modules target.
- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
- resctrl test restructuring and new non-contiguous CBMs CAT test
- new ktap_helpers to print diagnostic messages, pass/fail tests based
on exit code, abort test, and finish the test.
- a new test verify power supply properties.
- a new ftrace to exercise function tracer across cpu hotplug.
- timeout increase for mqueue test to allow the test to run on i3.metal
AWS instances.
- minor spelling corrections in several tests.
- missing gitignore files and changes to existing gitignore files.
* tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits)
kselftest: Add basic test for probing the rust sample modules
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
selftests: livepatch: Avoid running the tests if kernel-devel is missing
selftests: livepatch: Add initial .gitignore
selftests/resctrl: Add non-contiguous CBMs CAT test
selftests/resctrl: Add resource_info_file_exists()
selftests/resctrl: Split validate_resctrl_feature_request()
selftests/resctrl: Add a helper for the non-contiguous test
selftests/resctrl: Add test groups and name L3 CAT test L3_CAT
selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy"
selftests/mqueue: Set timeout to 180 seconds
selftests/ftrace: Add test to exercize function tracer across cpu hotplug
selftest: ftrace: fix minor typo in log
selftests: thermal: intel: workload_hint: add missing gitignore
selftests: thermal: intel: power_floor: add missing gitignore
selftests: uevent: add missing gitignore
selftests: Add test to verify power supply properties
selftests: ktap_helpers: Add a helper to finish the test
selftests: ktap_helpers: Add a helper to abort the test
selftests: ktap_helpers: Add helper to pass/fail test based on exit code
...
These helpers scatters or gathers a bitmap with the help of the mask
position bits parameter.
bitmap_scatter() does the following:
src: 0000000001011010
||||||
+------+|||||
| +----+||||
| |+----+|||
| || +-+||
| || | ||
mask: ...v..vv...v..vv
...0..11...0..10
dst: 0000001100000010
and bitmap_gather() performs this one:
mask: ...v..vv...v..vv
src: 0000001100000010
^ ^^ ^ 0
| || | 10
| || > 010
| |+--> 1010
| +--> 11010
+----> 011010
dst: 0000000000011010
bitmap_gather() can the seen as the reverse bitmap_scatter() operation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/
Co-developed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow FONT_SUN8x16 when EARLYFB is enabled for sparc64, even when
FRAMEBUFFER_CONSOLE is not to avoid the following warning for this case
WARNING: unmet direct dependencies detected for FONT_SUN8x16
Depends on [n]: FONT_SUPPORT [=y] && (FRAMEBUFFER_CONSOLE [=n] && (FONTS [=n] || SPARC [=y]) || BOOTX_TEXT)
Selected by [y]:
- EARLYFB [=y] && SPARC64 [=y]
by allowing it in the same manner as is done for powerpc in commit
0ebc7feae7 ("powerpc: Use shared font data").
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fixes: 0f1991949d ("sparc: Use shared font data")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402241539.epQT43nI-lkp@intel.com/
Cc: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240307180742.900068-1-andreas@gaisler.com
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?
Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.
We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.
This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).
The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.
To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.
Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.
We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace open coded functionalify of kstrdup_and_replace() with a call.
Link: https://lkml.kernel.org/r/20240213162741.3102810-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert test-string_helpers.c to KUnit so it can be easily run with
everything else.
Failure reporting doesn't need to be open-coded in most places, for
example, forcing a failure in the expected output for upper/lower
testing looks like this:
[12:18:43] # test_upper_lower: EXPECTATION FAILED at lib/string_helpers_kunit.c:579
[12:18:43] Expected dst == strings_upper[i].out, but
[12:18:43] dst == "ABCDEFGH1234567890TEST"
[12:18:43] strings_upper[i].out == "ABCDEFGH1234567890TeST"
[12:18:43] [FAILED] test_upper_lower
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string_helpers
...
[12:23:55] Starting KUnit Kernel (1/1)...
[12:23:55] ============================================================
[12:23:55] =============== string_helpers (3 subtests) ================
[12:23:55] [PASSED] test_get_size
[12:23:55] [PASSED] test_upper_lower
[12:23:55] [PASSED] test_unescape
[12:23:55] ================= [PASSED] string_helpers ==================
[12:23:55] ============================================================
[12:23:55] Testing complete. Ran 3 tests: passed: 3
[12:23:55] Elapsed time: 6.709s total, 0.001s configuring, 6.591s building, 0.066s running
Link: https://lore.kernel.org/r/20240301202732.2688342-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Convert test_string.c to KUnit so it can be easily run with everything
else.
Additional text context is retained for failure reporting. For example,
when forcing a bad match, we can see the loop counters reported for the
memset() tests:
[09:21:52] # test_memset64: ASSERTION FAILED at lib/string_kunit.c:93
[09:21:52] Expected v == 0xa2a1a1a1a1a1a1a1ULL, but
[09:21:52] v == -6799976246779207263 (0xa1a1a1a1a1a1a1a1)
[09:21:52] 0xa2a1a1a1a1a1a1a1ULL == -6727918652741279327 (0xa2a1a1a1a1a1a1a1)
[09:21:52] i:0 j:0 k:0
[09:21:52] [FAILED] test_memset64
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string
...
[09:37:40] Starting KUnit Kernel (1/1)...
[09:37:40] ============================================================
[09:37:40] =================== string (6 subtests) ====================
[09:37:40] [PASSED] test_memset16
[09:37:40] [PASSED] test_memset32
[09:37:40] [PASSED] test_memset64
[09:37:40] [PASSED] test_strchr
[09:37:40] [PASSED] test_strnchr
[09:37:40] [PASSED] test_strspn
[09:37:40] ===================== [PASSED] string ======================
[09:37:40] ============================================================
[09:37:40] Testing complete. Ran 6 tests: passed: 6
[09:37:40] Elapsed time: 6.730s total, 0.001s configuring, 6.562s building, 0.131s running
Link: https://lore.kernel.org/r/20240301202732.2688342-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Use an unsigned long constant instead of an int constant and a cast. This
fixes the checkpatch warning
WARNING: Unnecessary typecast of c90 int constant - '(unsigned long) 1' could be '1UL'
+ align = ((unsigned long) 1) << i;
Link: https://lkml.kernel.org/r/20240226191159.39509-4-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The module is never loaded successfully. Therefore, it'll never be
unloaded and we can remove the exit function.
Link: https://lkml.kernel.org/r/20240226191159.39509-3-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix a typo and change the function name to init_test_configuration. Both
caller and definition have the same typo, so the current code already
works.
Link: https://lkml.kernel.org/r/20240226191159.39509-2-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The stack_pools[] array has DEPOT_MAX_POOLS. The "pools_num" tracks the
number of pools which are initialized. See depot_init_pool() for more
details.
If pool_index == pools_num_cached, this will read one element beyond what
we want. If not all the pools are initialized, then the pool will be
NULL, triggering a WARN(), and if they are all initialized it will read
one element beyond the end of the array.
Link: https://lkml.kernel.org/r/361ac881-60b7-471f-91e5-5bf8fe8042b2@moroto.mountain
Fixes: b29d318858 ("lib/stackdepot: store free stack records in a freelist")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The new flags parameter allows controlling
- Whether or not the units suffix is separated by a space, for
compatibility with sort -h
- Whether or not to append a B suffix - we're not always printing
bytes.
Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240229205345.93902-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Improve the reporting of buffer overflows under CONFIG_FORTIFY_SOURCE to
help accelerate debugging efforts. The calculations are all just sitting
in registers anyway, so pass them along to the function to be reported.
For example, before:
detected buffer overflow in memcpy
and after:
memcpy: detected buffer overflow: 4096 byte read of buffer size 1
Link: https://lore.kernel.org/r/20230407192717.636137-10-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
With fortify overflows able to be redirected, we can use KUnit to
exercise the overflow conditions. Add tests for every API covered by
CONFIG_FORTIFY_SOURCE, except for memset() and memcpy(), which are
special-cased for now.
Disable warnings in the Makefile since we're explicitly testing
known-bad string handling code patterns.
Note that this makes the LKDTM FORTIFY_STR* tests obsolete, but those
can be removed separately.
Signed-off-by: Kees Cook <keescook@chromium.org>
The standard C string APIs were not designed to have a failure mode;
they were expected to always succeed without memory safety issues.
Normally, CONFIG_FORTIFY_SOURCE will use fortify_panic() to stop
processing, as truncating a read or write may provide an even worse
system state. However, this creates a problem for testing under things
like KUnit, which needs a way to survive failures.
When building with CONFIG_KUNIT, provide a failure path for all users
of fortify_panic, and track whether the failure was a read overflow or
a write overflow, for KUnit tests to examine. Inspired by similar logic
in the slab tests.
Signed-off-by: Kees Cook <keescook@chromium.org>
In order for CI systems to notice all the skipped tests related to
CONFIG_FORTIFY_SOURCE, allow the FORTIFY_SOURCE KUnit tests to build
with or without CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This allows replacements of the idioms "var += offset" and "var -=
offset" with the wrapping_assign_add() and wrapping_assign_sub() helpers
respectively. They will avoid wrap-around sanitizer instrumentation.
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Provide helpers that will perform wrapping addition, subtraction, or
multiplication without tripping the arithmetic wrap-around sanitizers. The
first argument is the type under which the wrap-around should happen
with. In other words, these two calls will get very different results:
wrapping_mul(int, 50, 50) == 2500
wrapping_mul(u8, 50, 50) == 196
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
We have one outstanding issue with the stmmac driver, which may
be a LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = "10gbase-r" in the device tree
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmXg6ioACgkQMUZtbf5S
IrupHQ/+Jt9OK8AYiUUBpeE0E0pb4yHS4KuiGWChx2YECJCeeeU6Ko4gaPI6+Nyv
mMh/3sVsLnX7w4OXp2HddMMiFGbd1ufIptS0T/EMhHbbg1h7Qr1jhpu8aM8pb9jM
5DwjfTZijDaW84Oe+Kk9BOonxR6A+Df27O3PSEUtLk4JCy5nwEwUr9iCxgCla499
3aLu5eWRw8PTSsJec4BK6hfCKWiA/6oBHS1pQPwYvWuBWFZe8neYHtvt3LUwo1HR
DwN9gtMiGBzYSSQmk8V1diGIokn80G5Krdq4gXbhsLxIU0oEJA7ltGpqasxy/OCs
KGLHcU5wCd3j42gZOzvBzzzj8RQyd2ZekyvCu7B5Rgy3fx6JWI1jLalsQ/tT9yQg
VJgFM2AZBb1EEAw/P2DkVQ8Km8ZuVlGtzUoldvIY1deP1/LZFWc0PftA6ndT7Ldl
wQwKPQtJ5DMzqEe3mwSjFkL+AiSmcCHCkpnGBIi4c7Ek2/GgT1HeUMwJPh0mBftz
smlLch3jMH2YKk7AmH7l9o/Q9ypgvl+8FA+icLaX0IjtSbzz5Q7gNyhgE0w1Hdb2
79q6SE3ETLG/dn75XMA1C0Wowrr60WKHwagMPUl57u9bchfUT8Ler/4Sd9DWn8Vl
55YnGPWMLCkxgpk+DHXYOWjOBRszCkXrAA71NclMnbZ5cQ86JYY=
=T2ty
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
Commit b38460bc46 ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.
So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The debugging code enabled by CONFIG_DEBUG_RWSEMS=y will only be
compiled in when CONFIG_PREEMPT_RT isn't set. There is no point to
allow CONFIG_DEBUG_RWSEMS to be set in a kernel configuration where
CONFIG_PREEMPT_RT is also set. Make them mutually exclusive.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222150540.79981-5-longman@redhat.com
The 'i' passed as an assertion message is a size_t, so should use '%zu',
not '%d'.
This was found by annotating the _MSG() variants of KUnit's assertions
to let gcc validate the format strings.
Fixes: bb95ebbe89 ("lib: Introduce CONFIG_MEMCPY_KUNIT_TEST")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The correct format specifier for p - n (both p and n are pointers) is
%td, as the type should be ptrdiff_t.
This was discovered by annotating KUnit assertion macros with gcc's
printf specifier, but note that gcc incorrectly suggested a %d or %ld
specifier (depending on the pointer size of the architecture being
built).
Fixes: 0ea0908311 ("lib/cmdline: Allow get_options() to take 0 to validate the input")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's executor_test logs the filter string in KUNIT_ASSERT_EQ_MSG(),
but passed a random character from the filter, rather than the whole
string.
This was found by annotating KUNIT_ASSERT_EQ_MSG() to let gcc validate
the format string.
Fixes: 76066f93f1 ("kunit: add tests for filtering attributes")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit d393acce7b ("drm/tests: Switch to kunit devices") switched the
DRM device creation helpers from an ad-hoc implementation to the new
kunit device creation helpers introduced in commit d03c720e03 ("kunit:
Add APIs for managing devices").
However, while the DRM helpers were using a platform_device, the kunit
helpers are using a dedicated bus and device type.
That situation creates small differences in the initialisation, and one
of them is that the kunit devices do not have the DMA masks setup. In
turn, this means that we can't do any kind of DMA buffer allocation
anymore, which creates a regression on some (downstream for now) tests.
Let's set up a default DMA mask that should work on any platform to fix
it.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the kunit_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
By allowing the filter_glob parameter to be written to, it's possible to
tweak the testsuites that will be executed on new module loads. This
makes it easier to run specific tests without having to reload kunit and
provides a way to filter tests on real HW even if kunit is builtin.
Example for xe driver:
1) Run just 1 test
# echo -n xe_bo > /sys/module/kunit/parameters/filter_glob
# modprobe -r xe_live_test
# modprobe xe_live_test
# ls /sys/kernel/debug/kunit/
xe_bo
2) Run all tests
# echo \* > /sys/module/kunit/parameters/filter_glob
# modprobe -r xe_live_test
# modprobe xe_live_test
# ls /sys/kernel/debug/kunit/
xe_bo xe_dma_buf xe_migrate xe_mocs
For completeness and to cover other use cases, also change filter and
filter_action to rw.
Link: https://lore.kernel.org/intel-xe/dzacvbdditbneiu3e3fmstjmttcbne44yspumpkd6sjn56jqpk@vxu7sksbqrp6/
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_owner needs to increment a stack_record refcount when a new
allocation occurs, and decrement it on a free operation. In order to do
that, we need to have a way to get a stack_record from a handle.
Implement __stack_depot_get_stack_record() which just does that, and make
it public so page_owner can use it.
Also, traversing all stackdepot buckets comes with its own complexity,
plus we would have to implement a way to mark only those stack_records
that were originated from page_owner, as those are the ones we are
interested in. For that reason, page_owner maintains its own list of
stack_records, because traversing that list is faster than traversing all
buckets while keeping at the same time a low complexity.
For now, add to stack_list only the stack_records of dummy_handle and
failure_handle, and set their refcount of 1.
Further patches will add code to increment or decrement stack_records
count on allocation and free operation.
Link: https://lkml.kernel.org/r/20240215215907.20121-4-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to move the heavy lifting into page_owner code, this one needs to
have access to the stack_record structure, which right now sits in
lib/stackdepot.c. Move it to the stackdepot.h header so page_owner can
access stack_record's struct fields.
Link: https://lkml.kernel.org/r/20240215215907.20121-3-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "page_owner: print stacks and their outstanding allocations",
v10.
page_owner is a great debug functionality tool that lets us know about all
pages that have been allocated/freed and their specific stacktrace. This
comes very handy when debugging memory leaks, since with some scripting we
can see the outstanding allocations, which might point to a memory leak.
In my experience, that is one of the most useful cases, but it can get
really tedious to screen through all pages and try to reconstruct the
stack <-> allocated/freed relationship, becoming most of the time a
daunting and slow process when we have tons of allocation/free operations.
This patchset aims to ease that by adding a new functionality into
page_owner. This functionality creates a new directory called
'page_owner_stacks' under 'sys/kernel//debug' with a read-only file called
'show_stacks', which prints out all the stacks followed by their
outstanding number of allocations (being that the times the stacktrace has
allocated but not freed yet). This gives us a clear and a quick overview
of stacks <-> allocated/free.
We take advantage of the new refcount_f field that stack_record struct
gained, and increment/decrement the stack refcount on every
__set_page_owner() (alloc operation) and __reset_page_owner (free
operation) call.
Unfortunately, we cannot use the new stackdepot api STACK_DEPOT_FLAG_GET
because it does not fulfill page_owner needs, meaning we would have to
special case things, at which point makes more sense for page_owner to do
its own {dec,inc}rementing of the stacks. E.g: Using
STACK_DEPOT_FLAG_PUT, once the refcount reaches 0, such stack gets
evicted, so page_owner would lose information.
This patchset also creates a new file called 'set_threshold' within
'page_owner_stacks' directory, and by writing a value to it, the stacks
which refcount is below such value will be filtered out.
A PoC can be found below:
# cat /sys/kernel/debug/page_owner_stacks/show_stacks > page_owner_full_stacks.txt
# head -40 page_owner_full_stacks.txt
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
alloc_pages_mpol+0x91/0x1f0
folio_alloc+0x14/0x50
filemap_alloc_folio+0xb2/0x100
page_cache_ra_unbounded+0x96/0x180
filemap_get_pages+0xfd/0x590
filemap_read+0xcc/0x330
blkdev_read_iter+0xb8/0x150
vfs_read+0x285/0x320
ksys_read+0xa5/0xe0
do_syscall_64+0x80/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
stack_count: 521
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
alloc_pages_mpol+0x91/0x1f0
folio_alloc+0x14/0x50
filemap_alloc_folio+0xb2/0x100
__filemap_get_folio+0x14a/0x490
ext4_write_begin+0xbd/0x4b0 [ext4]
generic_perform_write+0xc1/0x1e0
ext4_buffered_write_iter+0x68/0xe0 [ext4]
ext4_file_write_iter+0x70/0x740 [ext4]
vfs_write+0x33d/0x420
ksys_write+0xa5/0xe0
do_syscall_64+0x80/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
stack_count: 4609
...
...
# echo 5000 > /sys/kernel/debug/page_owner_stacks/set_threshold
# cat /sys/kernel/debug/page_owner_stacks/show_stacks > page_owner_full_stacks_5000.txt
# head -40 page_owner_full_stacks_5000.txt
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
alloc_pages_mpol+0x91/0x1f0
folio_alloc+0x14/0x50
filemap_alloc_folio+0xb2/0x100
__filemap_get_folio+0x14a/0x490
ext4_write_begin+0xbd/0x4b0 [ext4]
generic_perform_write+0xc1/0x1e0
ext4_buffered_write_iter+0x68/0xe0 [ext4]
ext4_file_write_iter+0x70/0x740 [ext4]
vfs_write+0x33d/0x420
ksys_pwrite64+0x75/0x90
do_syscall_64+0x80/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
stack_count: 6781
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
pcpu_populate_chunk+0xec/0x350
pcpu_balance_workfn+0x2d1/0x4a0
process_scheduled_works+0x84/0x380
worker_thread+0x12a/0x2a0
kthread+0xe3/0x110
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
stack_count: 8641
This patch (of 7):
The very first entry of stack_record gets a handle of 0, but this is wrong
because stackdepot treats a 0-handle as a non-valid one. E.g: See the
check in stack_depot_fetch()
Fix this by adding and offset of 1.
This bug has been lurking since the very beginning of stackdepot, but no
one really cared as it seems. Because of that I am not adding a Fixes
tag.
Link: https://lkml.kernel.org/r/20240215215907.20121-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20240215215907.20121-2-osalvador@suse.de
Co-developed-by: Marco Elver <elver@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kees Cook