Switch to the multi-planar API, which allows to handle buffers with
separate planes.
The RGA driver doesn't expose multi-planar formats, yet. The existing
contiguous planar formats can be used with the multi-planar API as well,
but the multi-planar API is required for multi-planar formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the provided V4L2_TYPE_IS_{OUTPUT,CAPTURE} macros to check if the
buffer or queue is OUTPUT or CAPTURE. The macros work also work for the
_MPLANE buffer and queue types and make it easier to switch to the
multi-planar API.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The local variable allows to simplify the accessed to the format and
makes it easier to change the type of the format.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the pixelformat instead of the v4l2_format to find the rga_fmt. This
avoids knowing the structure and type of v4l2_format in rga_fmt_find and
simplifies the function.
Also cleanup the users of the function. In try_fmt always return the
found pixel format to make sure that the pixel format is always set.
Thus, we can be sure that we will find the rga_fmt in s_fmt and can drop
the check if a given format has been found.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The try_fmt should limit the width and height to the know limits of the
RGA. Use the clamp() helper instead of open coding the clamping.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The RGA DMA descriptor list contains only 32-bit addresses. Set the
dma_mask to only allocate memory that is addressable by the descriptors.
This prevents errors when preparing vb2 buffers that were allocated by
the RGA.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Calculate the plane offsets and store them with the video buffer while
creating the buffer mapping.
This allows the driver to more freely handle the memory of the DMA
mapping as the offsets and the mapping can be kept in sync.
The driver still has to update the offsets to respect the configured
cropping and rotation, but this calculation is now separated from the
calculation of the plane offsets.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Split the register setup for the source and destination video buffers
into separate functions.
This is a cleanup to make the code more readable by separating the
offset calculation for the different buffers and prepares the driver for
using pre-calculated offsets of planes.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The RGA driver allocates two buffers for the DMA descriptors of the
input and output buffers. Whenever a new job is processed, the
descriptor list is updated for the current buffers.
By updating the descriptor list during buf_prepare, it is possible to
correctly fail DMABUF imports if the buffers that shall be imported are
not within the 32 bit address range that can be addressed by the RGA.
Managing the DMA descriptor list with the buffer also makes it easier to
track the buffer mapping and the plane offsets into this mapping.
The cost is that the driver now requires DMA coherent memory per buffer
for the descriptor list. However, the size scales with the size of the
video buffers and is not allocated if the RGA is not used.
While at it, use dma_alloc_coherent to allocate the descriptors and get
rid of the virt_to_phys calls to get the physical addresses.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The IOMMU of the RGA is programmed with a list of DMA descriptors that
contain an 32 bit address per 4k page in the video buffers. The address
in the descriptor points to the start address of the page.
Introduce 'struct rga_dma_desc' to make the handling of the DMA
descriptors explicit instead of hiding them behind standard types.
While at it, use provided helpers for iterating the sg_table instead of
manually calculating the DMA addresses.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Declare power-domain names "top", "ife0" and "ife1" eponymously for the
power-domains TITAN_TOP_GDSC, IFE_0_GDSC and IFE_1_GDSC respectively.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some platforms such as SC7280 have 3 CSIDs and 2 CSID-lites but current
code has hardcoded 2 as the maximum number of CSIDs. Remove the hardcoded
maximum number of VFEs to handle all possible combinations of CSIDs and
CSID-lites.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some platforms such as SC7280 have three VFEs and two VFE-lites. Current
code has hard-coded two as the maximum number of VFEs. Remove the
hard-coded maximum number of VFEs to handle all possible combinations of
VFEs and VFE-lites.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311200405.h6G4L9oe-lkp@intel.com
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Right now we use fixed indexes to assign power-domains, with a
requirement for the TOP GDSC to come last in the list.
Adding support for named power-domains means the declaration in the dtsi
can come in any order.
After this change we continue to support the old indexing - if a SoC
resource declaration or the in-use dtb doesn't declare power-domain names
we fall back to the default legacy indexing.
From this point on though new SoC additions should contain named
power-domains, eventually we will drop support for legacy indexing.
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Moving the location of the hooks to VFE power domains has several
advantages.
1. Separation of concerns and functional decomposition.
vfe.c should be responsible for and know best how manage
power-domains for a VFE, excising from camss.c follows this
principle.
2. Embedding a pointer to genpd in struct camss_vfe{} meas that we can
dispense with a bunch of kmalloc array inside of camss.c.
3. Splitting up titan top gdsc from vfe/ife gdsc provides a base for
breaking up magic indexes in dtsi.
Suggested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For the various versions of VFE we have a boiler-plate
pm_domain_on/pm_domain_off callback pair of the general form.
- Error check.
Not always done but applicable to all.
- device_link_add (DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME |
DL_FLAG_RPM_ACTIVE);
- Error check returning -EINVAL on error.
- Return 0
Reduce the pattern down to a common callback. VFE 4.1 is a special case
which to me also indicates that it is worthwhile maintaining an indirection
for the vfe_pm_domain_{on|off} for now.
Otherwise lets chuck out a bunch of needlessly replicated code.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Right now we use the top-level camss structure to provide pointers via
VFE id index back to genpd linkages.
In effect this hard-codes VFE indexes to power-domain indexes in the
dtsi and mandates a very particular ordering of power domains in the
dtsi, which bears no relationship to a real hardware dependency.
As a first step to rationalising the VFE power-domain code and breaking
the magic indexing in dtsi use per-VFE pointers to genpd linkages.
The top-level index in msm_vfe_subdev_init is still used to attain the
initial so no functional or logical change arises from this change.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
At the moment we have some complex code for determining if a VFE requires a
power-domain attachment. Particularly discordant in this scheme is the
subtle reliance on VFE and VFE Lite declaration ordering in our resources.
VFE id is used to determine if a VFE is lite or not and consequently if a
VFE requires power-domain attachment. VFE Lite though is not a correct
delineation between power-domain and non power-domain state since early
SoCs have neither VFE Lite nor power-domains attached to VFEs.
Introduce has_pd to the VFE resource structure to allow the CAMSS code to
understand if it needs to try to attach a power-domain for a given VFE.
As a side-effect from this we no longer need to care about VFE Lite or
non-Lite or the id number associated with either and which order the
VFE/VFE Lite was declared in.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.
On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.
Fixes: 64fbf44455 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The StarFive Camera Subsystem is only present on the StarFive JH7110
SoC. Hence add a dependency on ARCH_STARFIVE, to prevent asking the
user about this driver when configuring a kernel without StarFive SoC
support.
Fixes: bba185d141 ("media: staging: media: starfive: camss: Add core driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Chips&Media Wave 5 Series multi-standard codec IP is currently only
supported on Texas Instruments K3 architecture. Hence add a dependency on
ARCH_K3, to prevent asking the user about this driver when configuring a
kernel without Texas Instruments K3 Multicore SoC support.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: small update in commit log, and reformatted the Fixes tag]
These > comparisons should be >=. The formats->fmts[] array is either
a pointer to isp_formats_sink[] or isp_formats_source[] respectively.
Fixes: e57854628f ("media: staging: media: starfive: camss: Add ISP driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For dmabuf import users to be able to use the vaddr from another
videobuf2-dma-sg source, the exporter needs to set a proper vaddr on
vb2_dma_sg_dmabuf_ops_vmap callback. This patch adds vmap on map if
buf->vaddr was not set.
Cc: stable@kernel.org
Fixes: 7938f42181 ("dma-buf-map: Rename to iosys-map")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add AV1 information in visl documentation.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Let the visl test driver accept the AV1 pixel format.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
In the driver code, there is a define for CONFIG_VB2_GSC_DMA_CONTIG, but
this is not used anywhere in the code.
Just remove this unused definition.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of walking the entire parent node for something that has the
right compatible, use the scp_get() function provided by the MediaTek
SCP remoteproc driver to retrieve a handle to mtk_scp through the
devicetree "mediatek,scp" (phandle) property.
In case of multi-core SCP, this also allows to select a specific core.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The MDP3 RDMA needs to communicate with the SCP remote processor: allow
specifying a phandle to a SCP core.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
v4l2_async_unbind_subdev_one(), which is called in the line
following the list_move() operation contains list_move_tail()
for the same entry and overrides anything list_move() did.
Thus it can be removed.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
list_del corruption, c46c8198->next is LIST_POISON1 (00000100)
If CONFIG_DEBUG_LIST is disabled the operation results in a
kernel error due to NULL pointer dereference.
Fixes: 28a1295795 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix a simple indentation issue in the v4l2-subdev.h header.
Fixes: f57fa29592 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use V4L2 CCI for accessing device's registers. The 8-bit compatibility
read option is removed but this is supported by regmap through other
means.
Also the CCS register definitions are re-generated with V4L2 CCI
definitions. The older SMIA++ register definitions have been manually
converted.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Separate CCS static data read-only register access in ccs-reg-access.c by
naming them differently.
The code in this file generally deals with reading and writing registers
where as static data (when it comes to ccs_static_data_read_ro_reg())
contains the read-only register values but no hardware registers are
accessed in that case.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Generate register definitions that are fit for use with V4L2 CCI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Provide a few bits for drivers to store private information on register
definitions.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
linux/bits.h is needed for GENMASK(). Include it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The isc_try_fse() function, called from isc_validate(), takes two
parameters, an isc_device pointer, and a v4l2_subdev_state pointer. The
isc_device is accessed but not modified by the function. The state is
modified, including the struct v4l2_subdev_pad_config array it points
to, but they are then never used by the caller. Furthermore, the V4L2
subdev operation called by isc_try_fse() doesn't modify the subdev it is
called on. The isc_try_fse() function has thus no effect, and can just
be dropped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
[Sakari Ailus: Resolve conflicts due to API changes.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document that sub-device initialisation needs to complete before the async
sub-device is registered as there is no further driver action needed
before the sensor becomes accessible via the UAPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor may be accessible right after its async sub-device is
registered, enable runtime PM before doing so.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
A number of CCS register value limits are in ireal or float format.
Also convert them to integers for easier interpretation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: d3f863a63f ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: 7ee8505468 ("media: Add sensor driver support for the ov13b10 camera.")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
It also sets the runtime PM status to active as the sensor was turned
on by i2c-core.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7d ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This V4L2 subdev driver enables Digital Camera Memory Interface
Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: remove empty line at end of source]
Add the entry related to the STM32 MEDIA DCMIPP driver within the
MAINTAINERS file.
Add myself as maintainer of the DCMI driver as well.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Arrange files alphabetically.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
