Commit graph

3904 commits

Author SHA1 Message Date
Linus Torvalds
5b2eef966c Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (390 commits)
  drm/radeon/kms: disable underscan by default
  drm/radeon/kms: only enable hdmi features if the monitor supports audio
  drm: Restore the old_fb upon modeset failure
  drm/nouveau: fix hwmon device binding
  radeon: consolidate asic-specific function decls for pre-r600
  vga_switcheroo: comparing too few characters in strncmp()
  drm/radeon/kms: add NI pci ids
  drm/radeon/kms: don't enable pcie gen2 on NI yet
  drm/radeon/kms: add radeon_asic struct for NI asics
  drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
  drm/radeon/kms: add ucode loader for NI
  drm/radeon/kms: add support for DCE5 display LUTs
  drm/radeon/kms: add ni_reg.h
  drm/radeon/kms: add bo blit support for NI
  drm/radeon/kms: always use writeback/events for fences on NI
  drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
  drm/radeon/kms: add backend map workaround for barts
  drm/radeon/kms: fill gpu init for NI asics
  drm/radeon/kms: add disabled vbios accessor for NI asics
  drm/radeon/kms: handle NI thermal controller
  ...
2011-01-10 17:11:39 -08:00
Alex Deucher
56bec7c009 drm/radeon/kms: disable underscan by default
Lots of HDMI TVs overscan the incoming image by default.
The underscan option was added as a way to compensate for
that by underscanning the image so that the edges would
not be cut off on an overscanning TV.  However, the TV
provides no way of knowing whether it is overscanning or
not.  If the user has disabled overscan on their TV or has a
TV that does not overscan, you will get black bars around the
edges of your screen.  Prior to the patch we got complaints
and bug reports from users with overscanning TVs, now with
the patch, we get lots of complaints and bug reports from
users with non-overscanning TVs.  There's no good default,
but on average there have been more users complaining about
it being on by default than off, so change it to off.  This
will probably result in a new deluge of overscanning TV user
complaints.  There's no winning.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10 12:39:24 +10:00
Alex Deucher
c268cd36cc drm/radeon/kms: only enable hdmi features if the monitor supports audio
This avoids some issues in the current hdmi audio code for monitors
without audio.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10 12:38:40 +10:00
Dave Airlie
c3307cd6a7 Merge branch 'drm-radeon-ni' of ../drm-radeon-next into drm-core-next
* 'drm-radeon-ni' of ../drm-radeon-next: (30 commits)
  radeon: consolidate asic-specific function decls for pre-r600
  drm/radeon/kms: add NI pci ids
  drm/radeon/kms: don't enable pcie gen2 on NI yet
  drm/radeon/kms: add radeon_asic struct for NI asics
  drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
  drm/radeon/kms: add ucode loader for NI
  drm/radeon/kms: add support for DCE5 display LUTs
  drm/radeon/kms: add ni_reg.h
  drm/radeon/kms: add bo blit support for NI
  drm/radeon/kms: always use writeback/events for fences on NI
  drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
  drm/radeon/kms: add backend map workaround for barts
  drm/radeon/kms: fill gpu init for NI asics
  drm/radeon/kms: add disabled vbios accessor for NI asics
  drm/radeon/kms: handle NI thermal controller
  drm/radeon/kms: parse DCE5 encoder caps when setting up encoders
  drm/radeon/kms: dvo dpms updates for DCE5
  drm/radeon/kms: dac dpms updates for DCE5
  drm/radeon/kms: DCE5 atom dig encoder updates
  drm/radeon/kms: DCE5 atom transmitter control updates
  ...
2011-01-10 09:27:06 +10:00
Chris Wilson
0ba41e449f drm: Restore the old_fb upon modeset failure
... or else we may end up disabling the wrong framebuffer, leading to an
OOPS, e.g:

[ 6033.229012] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3271!
[ 6033.229012] invalid opcode: 0000 [#1] SMP
[ 6033.229012] last sysfs file:
/sys/devices/virtual/backlight/acpi_video0/uevent
[ 6033.229012] Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq
mperf snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq
snd_seq_device snd_pcm snd_timer thinkpad_acpi ppdev snd r852 sm_common
iTCO_wdt uvcvideo i2c_i801 iTCO_vendor_support microcode wmi nand
videodev nand_ids nand_ecc snd_page_alloc parport_pc parport mtd
soundcore joydev v4l1_compat pcspkr uinput ipv6 sdhci_pci sdhci mmc_core
yenta_socket i915 drm_kms_helper drm i2c_algo_bit i2c_core video output
[last unloaded: scsi_wait_scan]
[ 6033.229012]
[ 6033.229012] Pid: 4834, comm: Xorg Not tainted 2.6.37-rc8+ #25 7661BL5/7661BL5
[ 6033.229012] EIP: 0060:[<f86fda5e>] EFLAGS: 00013246 CPU: 0
[ 6033.229012] EIP is at i915_gem_object_unpin+0x23/0x76 [i915]
[ 6033.229012] EAX: f68a4000 EBX: f6831f00 ECX: 000600fa EDX: f68a8000
[ 6033.229012] ESI: f68a4014 EDI: f68a42b8 EBP: f2169c44 ESP: f2169c3c
[ 6033.229012]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 6033.229012] Process Xorg (pid: 4834, ti=f2168000 task=f21c8000 task.ti=f2168000)
[ 6033.229012] Stack:
[ 6033.229012]  f3a84800 f68a4014 f2169c54 f87045d8 f3a84800 f872d9a8 f2169c68 f7fd8091
[ 6033.229012]  f3b952a4 00000000 f68a414c f2169cf0 f7fd9377 00000000 00000000 f7fd98b0
[ 6033.229012]  f7fd9f4e 0000000f f7f328a0 00000000 00000000 00000000 f2169ca4 f68a414c
[ 6033.229012] Call Trace:
[ 6033.229012]  [<f87045d8>] ? intel_crtc_disable+0x36/0x41 [i915]
[ 6033.229012]  [<f7fd8091>] ?  drm_helper_disable_unused_functions+0xcd/0xf9 [drm_kms_helper]
[ 6033.229012]  [<f7fd9377>] ? drm_crtc_helper_set_config+0x62a/0x7f7 [drm_kms_helper]
[ 6033.229012]  [<c04daa10>] ? __slab_free+0x1b/0xa4
[ 6033.229012]  [<f7fd7e62>] ? drm_fb_helper_initial_config+0x466/0x497 [drm_kms_helper]
[ 6033.229012]  [<f7fd7ea3>] ? drm_fb_helper_restore+0x10/0x2a [drm_kms_helper]
[ 6033.229012]  [<f86f2577>] ? i915_driver_lastclose+0x2a/0x57 [i915]
[ 6033.229012]  [<f7f1989f>] ? drm_lastclose+0x45/0x23e [drm]
[ 6033.229012]  [<f7f1a0b4>] ? drm_release+0x462/0x4d7 [drm]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-10 09:24:40 +10:00
Dave Airlie
7ad7f87b87 Merge remote branch 'nouveau/drm-nouveau-next' of ../drm-nouveau-next into drm-core-next
* 'nouveau/drm-nouveau-next' of ../drm-nouveau-next:
  drm/nouveau: fix hwmon device binding
  drm/nouveau: create grctx on the fly on all chipsets
  drm/nvc0: fix init without firmware present
  drm/nvc0/pgraph: fix 0x406028/0x405870 init
  drm/nvc0/pgraph: more unit names
  drm/nvc0/pfifo: support for chipsets with only one PSUBFIFO (0xc1)
  drm/nvc0: reserve only subc 0 for kernel use
  drm/nv50: sync up gr data error names with rnn, use for nvc0 also
  drm/nvc0: parse a couple more PGRAPH_INTR
  drm/nvc0: nuke left-over debug messages
  drm/nvc0: kill off a couple more magics
  drm/nouveau: Validate channel indices passed from userspace.
  drm/nouveau: Only select ACPI_VIDEO if its dependencies are met
2011-01-10 09:23:49 +10:00
Linus Torvalds
23d69b09b7 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits)
  usb: don't use flush_scheduled_work()
  speedtch: don't abuse struct delayed_work
  media/video: don't use flush_scheduled_work()
  media/video: explicitly flush request_module work
  ioc4: use static work_struct for ioc4_load_modules()
  init: don't call flush_scheduled_work() from do_initcalls()
  s390: don't use flush_scheduled_work()
  rtc: don't use flush_scheduled_work()
  mmc: update workqueue usages
  mfd: update workqueue usages
  dvb: don't use flush_scheduled_work()
  leds-wm8350: don't use flush_scheduled_work()
  mISDN: don't use flush_scheduled_work()
  macintosh/ams: don't use flush_scheduled_work()
  vmwgfx: don't use flush_scheduled_work()
  tpm: don't use flush_scheduled_work()
  sonypi: don't use flush_scheduled_work()
  hvsi: don't use flush_scheduled_work()
  xen: don't use flush_scheduled_work()
  gdrom: don't use flush_scheduled_work()
  ...

Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c
as per Tejun.
2011-01-07 16:58:04 -08:00
Lucas Stach
07cfe0e7a8 drm/nouveau: fix hwmon device binding
Bind the hwmon structs to nouveau device kobj. This makes sure
the hwmon files are created in the device subdir in line with
all other hwmon drivers.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07 23:22:17 +10:00
Daniel Vetter
187f3da3d9 radeon: consolidate asic-specific function decls for pre-r600
Move them to radeon_asic.h together with the other asic
specific stuff.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 15:33:22 +10:00
Dan Carpenter
fea6f330cd vga_switcheroo: comparing too few characters in strncmp()
This is a copy-and-paste bug.  We should be comparing 4 characters here
instead of 3.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 15:29:37 +10:00
Alex Deucher
0d1014a2f2 drm/radeon/kms: don't enable pcie gen2 on NI yet
Still needs to be implemented.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:43 +10:00
Alex Deucher
a43b7665de drm/radeon/kms: add radeon_asic struct for NI asics
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:42 +10:00
Alex Deucher
ed18a3603f drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
The vbios only partially initializes the memory controller on
NI, so now we need to load the MC ucode in the driver and set
the default clocks once the ucode is loaded.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:41 +10:00
Alex Deucher
0af62b0168 drm/radeon/kms: add ucode loader for NI
The MC ucode is no longer loaded by the vbios
tables as on previous asics.  It now must be loaded
by the driver.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:40 +10:00
Alex Deucher
fee298fd6f drm/radeon/kms: add support for DCE5 display LUTs
The hardware supports advanced user defined color management
but at the moment, there is no infrastructure in place to take
advantage of it so for now we just support the legacy LUTs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:39 +10:00
Alex Deucher
58c2e9f02a drm/radeon/kms: add ni_reg.h
This adds some new NI (northern islands) specific display
register defines.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:38 +10:00
Alex Deucher
ff5b8562d9 drm/radeon/kms: add bo blit support for NI
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:37 +10:00
Alex Deucher
7d52785d2a drm/radeon/kms: always use writeback/events for fences on NI
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:35 +10:00
Alex Deucher
9ace9f7b16 drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
NI chips no longer load the MC ucode in the asic_init sequence so
the asic comes up in a basic mode with low engine/memory clocks and
a voltage.  Once the MC ucode is loaded by the driver the card
can be programmed to it's proper default clocks and voltage.  As such
the default clocks in the firmware info table as the post clocks, not
the default running clocks.  Track the default post clocks and default
running clocks separately to handle this.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:34 +10:00
Alex Deucher
03f4009055 drm/radeon/kms: add backend map workaround for barts
Same as Cypress.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:33 +10:00
Alex Deucher
adb68fa2f7 drm/radeon/kms: fill gpu init for NI asics
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:31 +10:00
Alex Deucher
c901bcddd0 drm/radeon/kms: add disabled vbios accessor for NI asics
Some systems disable the vbios on secondary cards or cards that
have been posted.  This code re-enabled the vbios so the driver
can load it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:30 +10:00
Alex Deucher
4fddba1fd9 drm/radeon/kms: handle NI thermal controller
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:29 +10:00
Alex Deucher
36868bda88 drm/radeon/kms: parse DCE5 encoder caps when setting up encoders
Needed to tell which DIG encoders are HBR2 capable for DP 1.2.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:28 +10:00
Alex Deucher
d07f4e8350 drm/radeon/kms: dvo dpms updates for DCE5
The DVOOutputControl table was removed for DCE5.
DVOEncoderControl now handles everything.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:27 +10:00
Alex Deucher
69c74525c2 drm/radeon/kms: dac dpms updates for DCE5
The DAC1OutputControl table was removed for DCE5.
DAC1EncoderControl now handles everything.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:26 +10:00
Alex Deucher
badbb57b93 drm/radeon/kms: DCE5 atom dig encoder updates
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:25 +10:00
Alex Deucher
a001182af8 drm/radeon/kms: DCE5 atom transmitter control updates
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:24 +10:00
Alex Deucher
a572eaa372 drm/radeon/kms: DCE5 atom spread spectrum updates
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:23 +10:00
Alex Deucher
f82b3ddc5f drm/radeon/kms: DCE5 atom SetPixelClock updates
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:22 +10:00
Alex Deucher
881dd74ea7 drm/radeon/kms: DCE5 supports 16k display surfaces
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:21 +10:00
Alex Deucher
936b27cce8 drm/radeon/kms: update display watermark calculations for DCE5
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:19 +10:00
Alex Deucher
1fe183050f drm/radeon/kms: add NI chip families
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:18 +10:00
Alex Deucher
633b91643f drm/radeon/kms: clean up ASIC_IS_DCE41() macro
only fusion asics are dce4.1

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:17 +10:00
Alex Deucher
32171d2297 drm/radeon/kms: fix some typos in evergreen pm4 defines
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:16 +10:00
Alex Deucher
c46cb4dabd drm/radeon/kms: set the MSB of the HDP slice size
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:15 +10:00
Alex Deucher
9e46a48df2 drm/radeon/kms: add support for gen2 pcie link speeds
Supported on rv6xx/r7xx/evergreen.  Cards come up in gen1 mode.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:14 +10:00
Alex Deucher
3313e3d433 drm/radeon/kms: add pcie get/set lane support for r6xx/r7xx/evergreen
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 14:11:13 +10:00
Ben Skeggs
e457acaed4 drm/nouveau: create grctx on the fly on all chipsets
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07 14:03:58 +10:00
James Simmons
dfe63bb0ad drm: Update fbdev fb_fix_screeninfo
If you change the color depth via fbset or some other framebuffer aware
userland application struct fb_fix_screeninfo is not updated to this new
information. This patch fixes this issue. Also the function is changed to
just pass in struct drm_framebuffer so in the future we could use more
fields. I'm hoping some day fix->smem* could be set here :-)

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 13:44:40 +10:00
Ben Skeggs
eeb9cc015f drm/nvc0: fix init without firmware present
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-06 22:10:15 +10:00
Alex Deucher
f598aa7593 drm/radeon/kms: add quirk for Mac Radeon HD 2600 card
Reported-by: 屋国遥 <hyagni@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06 14:32:34 +10:00
Tejun Heo
32c87fca2f drm/radeon: use system_wq instead of dev_priv->wq
With cmwq, there's no reason for radeon to use a dedicated workqueue.
Drop dev_priv->wq and use system_wq instead.

Because radeon_driver_irq_uninstall_kms() may be called from
unsleepable context, the work items can't be flushed from there.
Instead, init and flush from radeon_irq_kms_init/fini().

While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work.
Always initialize and sync cancel instead of being unnecessarily smart
about it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06 14:32:16 +10:00
Marek Olšák
9eba4a93ce drm/radeon/kms: manage r300 CMASK RAM access and allow CMASK clear
The CMASK RAM is for colorbuffer compression (used in conjunction
with MSAA). Only one user (filp) can access it.

The CMASK RAM access is managed in the same way as Hyper-Z, but there is
a separate ioctl, because an app that uses MSAA does not necessarily
have to use zbuffering.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06 13:00:45 +10:00
Alex Deucher
2f299d5de0 drm/radeon/kms: adjust quirk for acer laptop
Acer laptop (TravelMate 5730G) has an HDMI connector
on the laptop and a DVI connector on the docking station
and both share the same encoder, hpd pin, and ddc line.
The bios connector table reflects this and is technically
correct, however, we drop the DVI connector here since
xrandr has no concept of encoders (only crtcs and connectors)
and will try and drive both connectors with different crtcs
which isn't possible on the hardware side and leaves no crtcs
for LVDS or VGA.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=32732

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06 12:59:20 +10:00
Dave Airlie
66b37c6777 vga_switcheroo: split switching into two stages.
stage 1: turn card on, switch boot vga pointer.
stage 2: switch fbs, switch mux and power off old card.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05 13:45:46 +10:00
Dave Airlie
5bcf719b7d drm/switcheroo: track state of switch in drivers.
We need to track the state of the switch in drivers, so that after s/r
we don't resume the card we've explicitly switched off before. Also
don't allow a userspace open to occur if we've switched the gpu off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05 13:45:30 +10:00
Dave Airlie
8d608aa629 vga_switcheroo: add reprobe hook for fbcon to recheck connected outputs.
This adds a hook after the mux is switched for the driver to reprobe
the connected outputs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05 13:44:07 +10:00
Dave Airlie
d1fbd923da nouveau/acpi: improve detection of what is IGD and what is DIS.
This improves the IGD/DIS picking using firstly if Intel, then
if the bus is bus 0. There may be a correct way to do this, but
I've no idea what it is.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05 13:43:32 +10:00
Dave Airlie
5ccb377fea drm/nouveau: add delayed switch complete callback.
this just adds the callback on the delayed switch mechanism.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05 13:43:22 +10:00