Convert/merge the existing text format SCPI binding additions for
amlogic,scpi into the common arm,scpi json scheme.
Couple of things to note:
"amlogic,meson-gxbb-scpi" is always used with "arm,scpi-pre-1.0" and
"amlogic,meson-gxbb-scpi-sensors" is used always with "arm,scpi-sensors"
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-4-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the old text format binding for System Control and Power Interface
(SCPI) Message Protocol into the new and shiny YAML format.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-3-sudeep.holla@arm.com
[robh: Move fixed strings to 'properties', drop some literal block notations]
Signed-off-by: Rob Herring <robh@kernel.org>
Once the arm,scpi binding is converted to YAML format, the following
errors will be seen when doing `make DT_CHECKER_FLAGS=-m dt_binding_check`
From schema: Documentation/devicetree/bindings/firmware/arm,scpi.yaml
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml:
scpi@2f000000: $nodename:0: 'scpi' was expected
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml:
scpi@2f000000: reg: [[0, 788529152, 0, 512]] is not of type 'object'
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml:
scpi@2f000000: 'shmem' is a required property
Fix those error following the SCPI bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-2-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
"amlogic,meson-gxbb-scp-shmem" is already in the Generic on-chip SRAM
binding though "amlogic,meson-gxbb-scpi" is missing which is now added.
Also remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-5-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Commit a90b15e0ad ("Documentation: bindings: decouple juno specific
details from generic binding") moved the juno specific bindings into
separate file. Though there was no need for juno specific binding, it
has been used unfortunately for whatever stupid reason I added it for.
Let us move the same to the generic sram.yaml schema and remove the
old text format binding.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-4-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Move the SRAM and shared memory binding for SCMI into the existing
Generic on-chip SRAM. We just need to update the compatible list and
there-by remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-3-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Move the SRAM and shared memory binding for SCPI into the existing
Generic on-chip SRAM. We just need to update the compatible list and
there-by remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-2-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the current OMAP Mailbox binding from text format to YAML
format/DT schema, and delete the legacy text binding file.
The new YAML binding conversion is an updated version compared to
the original. The descriptions for certain properties have been
improved to provide more clarity. Constraints are added to the
properties 'ti,mbox-num-users', 'ti,mbox-num-fifos' and 'interrupts'.
The 'ti,hwmods' is a legacy property and is retained only to reflect
the existing usage on some older OMAP2 and OMAP3 platforms.
All the existing examples have also been updated to reflect the
latest dts nodes (ti,hwmods removed from OMAP4 and AM33xx examples,
and interrupts value updated for AM65x SoCs).
Signed-off-by: Suman Anna <s-anna@ti.com>
[robh: Update ref in ti,omap-remoteproc.yaml]
Link: https://lore.kernel.org/r/20210520234348.4479-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
The check for the board compatible should be limited only to the root
node. Any other nodes with such compatible are not part of this schema
and should not match.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Link: https://lore.kernel.org/r/20210526162750.135139-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the common MDIO mux bindings to DT schema.
Drop the example from mdio-mux.yaml as mdio-mux-gpio.yaml has the same one.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210526181411.2888516-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Straight conversion of the txt file using the mux-consumer.yaml
binding now that is available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Peter Rosin <peda@axentia.se>
[robh: Drop quotes and $ref for mux-controls]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210522112908.1611389-3-jic23@kernel.org
Use the i2c-mux.yaml schema in the maxim,max9286 binding schema. With this,
several properties can be dropped as they are defined in i2c-mux.yaml
already.
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-7-robh@kernel.org
Convert the i2c-mux-pca954x binding to DT schema format.
Add the missing compatible for 'nxp,pca9645' which is already in use.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-6-robh@kernel.org
As some of the example I2C devices don't have schemas yet, change them to
ones that do.
Cc: Peter Rosin <peda@axentia.se>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-5-robh@kernel.org
Convert the mux controller bindings to DT schema.
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-4-robh@kernel.org
Convert the Philips PCF8563/Epson RTC8564 binding to DT schema format.
Add 'interrupts' and 'wakeup-source' as this device has an interrupt
which was not documented, but in use. Add 'start-year' as well.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-3-robh@kernel.org
The ti,j721e-system-controller binding does not follow the standard mux
controller node name 'mux-controller' and the example is incomplete. Fix
these to avoid schema errors before the mux controller binding is
converted to schema.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-2-robh@kernel.org
Convert the ARM Timer-Watchdog Device Tree binding documentation to
json-schema. As the old binding document actually contained two
bindings, it is split in two document: one for the timer part, and one
for the watchdog part.
Document missing properties.
Update examples to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3ccc0cf5319f56e230ee3b8a009f8d63afb114c1.1621521847.git.geert+renesas@glider.be
[robh: Fix up node names]
Signed-off-by: Rob Herring <robh@kernel.org>
property-units.txt is not maintained anymore. New suffixes are now
supported that have not been added here.
To avoid people incorrectly think a given suffix is not in the list remove
the file entirely and point to the authoritative place where the
recommended suffixes are maintained.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20210512152311.7399-1-luca@lucaceresoli.net
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas H8/300 Timer Pulse Unit Device Tree binding
documentation to json-schema.
Correct clock-names, as "peripheral_clk" is the name of the supplier,
and all users use "fck".
Note that there are two different bindings for the TPU, both using
"renesas,tpu": this one for using the TPU as a clock source (used on
H8/300), and a second use for using the TPU as a PWM controller (used on
ARM). To avoid conflicts, both bindings are marked with the appropriate
"select" logic, to check for the absence respectively presence of the
"#pwm-cells" property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lore.kernel.org/r/1c33e62c3a74979c3ca9580176e6cf89384caea9.1620648868.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas EMMA Mobile EV2 System Management Unit (SMU) Device
Tree binding documentation to json-schema.
Drop the separate provider examples, as they mostly duplicate the global
example. Drop the consumer example, as it doesn't belong here.
Update the global example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/526e1a412145a0fcc5a43dcf6de5c580301017cb.1620119350.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Convert linaro,optee-tz to json schema format for better documentation
and error checks.
NOTE: This change does introduce a stricter naming convention for
optee nodes.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210426164008.20000-1-nm@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ti,sci to json schema for better checks and documentation.
NOTE: This change does introduce a stricter naming convention for
TI-SCI controller nodes.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210426155457.21221-5-nm@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ti,sci-pm-domain to json schema for better checks and
documentation.
Differences being:
- Drop consumer example as they are documented in the corresponding
bindings themselves.
- Drop phandle description for reset consumer or cell definition as it
is redundant.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210426155457.21221-4-nm@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ti,sci-clk to json schema for better checks and documentation.
Differences being:
- Drop consumer example as they are documented in the corresponding
bindings themselves.
- Standardize the node name as clock-controller rather than clocks as
it is more appropriate.
- Drop phandle description for clock-cells as it is redundant.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210426155457.21221-3-nm@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ti,sci-reset to json schema for better checks and documentation.
Differences being:
- Drop consumer example as they are documented in the corresponding
bindings themselves.
- Drop phandle description for reset consumer or cell definition as it is
redundant.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210426155457.21221-2-nm@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
- Prevent PSI state corruption when schedule() races with cgroup move. A
recent commit combined two PSI callbacks to reduce the number of cgroup
tree updates, but missed that schedule() can drop rq::lock for load
balancing, which opens the race window for cgroup_move_task() which then
observes half updated state. The fix is to solely use task::ps_flags
instead of looking at the potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding division
which can lead to an off-by-one error exceeding the buckets array size.
- Prevent unfairness caused by missing load decay when a task is attached
to a cfs runqueue. The old load of the task is attached to the runqueue
and never removed. Fix it by enforcing the load update through the
hierarchy for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option
-----BEGIN PGP SIGNATURE-----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=L3ar
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler updates:
- Prevent PSI state corruption when schedule() races with cgroup
move.
A recent commit combined two PSI callbacks to reduce the number of
cgroup tree updates, but missed that schedule() can drop rq::lock
for load balancing, which opens the race window for
cgroup_move_task() which then observes half updated state.
The fix is to solely use task::ps_flags instead of looking at the
potentially mismatching scheduler state
- Prevent an out-of-bounds access in uclamp caused bu a rounding
division which can lead to an off-by-one error exceeding the
buckets array size.
- Prevent unfairness caused by missing load decay when a task is
attached to a cfs runqueue.
The old load of the task was attached to the runqueue and never
removed. Fix it by enforcing the load update through the hierarchy
for unthrottled run queue instances.
- A documentation fix fot the 'sched_verbose' command line option"
* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix unfairness caused by missing load decay
sched: Fix out-of-bound access in uclamp
psi: Fix psi state corruption when schedule() races with cgroup move
sched,doc: sched_debug_verbose cmdline should be sched_verbose
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config is
really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=935P
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
- Remove the nvlink support now that it's only user has been removed.
- Enable huge vmalloc mappings for Radix MMU (P9).
- Fix KVM conversion to gfn-based MMU notifier callbacks.
- Fix a kexec/kdump crash with hot plugged CPUs.
- Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.
- Restore alphabetic order of the selects under CONFIG_PPC.
Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin, Sandipan Das, Sourabh Jain.
-----BEGIN PGP SIGNATURE-----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=2P8l
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates and fixes from Michael Ellerman:
"A bit of a mixture of things, tying up some loose ends.
There's the removal of the nvlink code, which dependend on a commit in
the vfio tree. Then the enablement of huge vmalloc which was in next
for a few weeks but got dropped due to conflicts. And there's also a
few fixes.
Summary:
- Remove the nvlink support now that it's only user has been removed.
- Enable huge vmalloc mappings for Radix MMU (P9).
- Fix KVM conversion to gfn-based MMU notifier callbacks.
- Fix a kexec/kdump crash with hot plugged CPUs.
- Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.
- Restore alphabetic order of the selects under CONFIG_PPC.
Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
Sandipan Das, and Sourabh Jain"
* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
powerpc/powernv/memtrace: Fix dcache flushing
powerpc/kexec_file: Use current CPU info while setting up FDT
powerpc/64s/radix: Enable huge vmalloc mappings
powerpc/powernv: remove the nvlink support
and netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to
avoid false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JmWS
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc1, including fixes from bpf, can and
netfilter trees. Self-contained fixes, nothing risky.
Current release - new code bugs:
- dsa: ksz: fix a few bugs found by static-checker in the new driver
- stmmac: fix frame preemption handshake not triggering after
interface restart
Previous releases - regressions:
- make nla_strcmp handle more then one trailing null character
- fix stack OOB reads while fragmenting IPv4 packets in openvswitch
and net/sched
- sctp: do asoc update earlier in sctp_sf_do_dupcook_a
- sctp: delay auto_asconf init until binding the first addr
- stmmac: clear receive all(RA) bit when promiscuous mode is off
- can: mcp251x: fix resume from sleep before interface was brought up
Previous releases - always broken:
- bpf: fix leakage of uninitialized bpf stack under speculation
- bpf: fix masking negation logic upon negative dst register
- netfilter: don't assume that skb_header_pointer() will never fail
- only allow init netns to set default tcp cong to a restricted algo
- xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
false positive errors
- ethtool: fix missing NLM_F_MULTI flag when dumping
- can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
- sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
- bridge: fix NULL-deref caused by a races between assigning
rx_handler_data and setting the IFF_BRIDGE_PORT bit
Latecomer:
- seg6: add counters support for SRv6 Behaviors"
* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
atm: firestream: Use fallthrough pseudo-keyword
net: stmmac: Do not enable RX FIFO overflow interrupts
mptcp: fix splat when closing unaccepted socket
i40e: Remove LLDP frame filters
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
i40e: fix the restart auto-negotiation after FEC modified
i40e: Fix use-after-free in i40e_client_subtask()
i40e: fix broken XDP support
netfilter: nftables: avoid potential overflows on 32bit arches
netfilter: nftables: avoid overflows in nft_hash_buckets()
tcp: Specify cmsgbuf is user pointer for receive zerocopy.
mlxsw: spectrum_mr: Update egress RIF list before route's action
net: ipa: fix inter-EE IRQ register definitions
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
can: mcp251x: fix resume from sleep before interface was brought up
can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
netfilter: nftables: Fix a memleak from userdata error path in new objects
netfilter: remove BUG_ON() after skb_header_pointer()
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
...
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
