Since we want to revoke the ggtt vma from only under the ggtt->mutex, we
need to move protection of the userfault tracking from the struct_mutex
to the ggtt->mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-2-chris@chris-wilson.co.uk
We can reduce the locking for fence registers from the dev->struct_mutex
to a local mutex. We could introduce a mutex for the sole purpose of
tracking the fence acquisition, except there is a little bit of overlap
with the fault tracking, so use the i915_ggtt.mutex as it covers both.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-1-chris@chris-wilson.co.uk
As we plan to continue driver load after GuC initialization
failure, we can't assume that GuC log data will be available
just because GuC was initially enabled. We must check that
GuC is still running instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-2-michal.wajdeczko@intel.com
Move the active tracking for the frontbuffer operations out of the
i915_gem_object and into its own first class (refcounted) object. In the
process of detangling, we switch from low level request tracking to the
easier i915_active -- with the plan that this avoids any potential
atomic callbacks as the frontbuffer tracking wishes to sleep as it
flushes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816074635.26062-1-chris@chris-wilson.co.uk
The engine->guc_id is GuC FW defined and it is not guaranteed to be
below I915_NUM_ENGINES, so we shouldn't use it with the i915-defined
client->submissions, as we might overflow.
Instead of fixing it, just get rid of client->submissions, because the
information we get from it is not interesting anymore now that we only
have 1 client.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814002145.29056-1-daniele.ceraolospurio@intel.com
We were using the last_fence to track the last request that used this
vma that might be interpreted by a fence register and forced ourselves
to wait for this request before modifying any fence register that
overlapped our vma. Due to requirement that we need to track any XY_BLT
command, linear or tiled, this in effect meant that we have to track the
vma for its active lifespan anyway, so we can forgo the explicit
last_fence tracking and just use the whole vma->active.
Another solution would be to pipeline the register updates, and would
help resolve some long running stalls for gen3 (but only gen 2 and 3!)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812174804.26180-1-chris@chris-wilson.co.uk
Before we start upon our great GT interrupt refactor, throw out the
cruft! In this case, it is an unloved debugfs showing the current ips
status, a fairly meaningless bunch of numbers that we are not checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810090329.6966-1-chris@chris-wilson.co.uk
Multiple uncore structures will share the debug infrastructure, so
move it to a common place and add extra locking around it.
Also, since we now have a separate object, it is cleaner to have
dedicated functions working on the object to stop and restart the
mmio debug. Apart from the cosmetic changes, this patch introduces
2 functional updates:
- All calls to check_for_unclaimed_mmio will now return false when
the debug is suspended, not just the ones that are active only when
i915_modparams.mmio_debug is set. If we don't trust the result of the
check while a user is doing mmio access then we shouldn't attempt the
check anywhere.
- i915_modparams.mmio_debug is not save/restored anymore around user
access. The value is now never touched by the kernel while debug is
disabled so no need for save/restore.
v2: squash mmio_debug patches, restrict mmio_debug lock usage (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809063116.7527-1-chris@chris-wilson.co.uk
Currently we walk the entire list of obj->vma for each obj within a file
to find the matching vma of this context. Since we know we are searching
for a particular vma bound to a user context, we can use the rbtree to
search for it rather than repeatedly walk everything.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808162407.28121-1-chris@chris-wilson.co.uk
As we need to acquire a mutex to serialise the final
intel_wakeref_put, we need to ensure that we are in process context at
that time. However, we want to allow operation on the intel_wakeref from
inside timer and other hardirq context, which means that need to defer
that final put to a workqueue.
Inside the final wakeref puts, we are safe to operate in any context, as
we are simply marking up the HW and state tracking for the potential
sleep. It's only the serialisation with the potential sleeping getting
that requires careful wait avoidance. This allows us to retain the
immediate processing as before (we only need to sleep over the same
races as the current mutex_lock).
v2: Add a selftest to ensure we exercise the code while lockdep watches.
v3: That test was extremely loud and complained about many things!
v4: Not a whale!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111295
References: https://bugs.freedesktop.org/show_bug.cgi?id=111245
References: https://bugs.freedesktop.org/show_bug.cgi?id=111256
Fixes: 18398904ca ("drm/i915: Only recover active engines")
Fixes: 51fbd8de87 ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808202758.10453-1-chris@chris-wilson.co.uk
Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.
There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.
v2: fix the include guard name in the renamed file
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com
To maintain a fast lookup from a GT centric irq handler, we want the
engine lookup tables on the intel_gt. To avoid having multiple copies of
the same multi-dimension lookup table, move the generic user engine
lookup into an rbtree (for fast and flexible indexing).
v2: Split uabi_instance cf uabi_class
v3: Set uabi_class/uabi_instance after collating all engines to provide a
stable uabi across parallel unordered construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20190806124300.24945-2-chris@chris-wilson.co.uk
Switch to tracking activity via i915_active on individual nodes, only
keeping a list of retired objects in the cache, and reaping the cache
when the engine itself idles.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804124826.30272-2-chris@chris-wilson.co.uk
The shrinker cannot touch objects used by the contexts (logical state
and ring). Currently we mark those as "pin_global" to let the shrinker
skip over them, however, if we remove them from the shrinker lists
entirely, we don't event have to include them in our shrink accounting.
By keeping the unshrinkable objects in our shrinker tracking, we report
a large number of objects available to be shrunk, and leave the shrinker
deeply unsatisfied when we fail to reclaim those. The shrinker will
persist in trying to reclaim the unavailable objects, forcing the system
into a livelock (not even hitting the dread oomkiller).
v2: Extend unshrinkable protection for perma-pinned scratch and guc
allocations (Tvrtko)
v3: Notice that we should be pinned when marking unshrinkable and so the
link cannot be empty; merge duplicate paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190802212137.22207-1-chris@chris-wilson.co.uk
Tiger Lake has a new register offset for DC5 and DC6 residency counters.
v2:
- Rename registers since they are not in the CSR memory range
(requested by Anshuman)
- Fix type (requested by Matthew)
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726002412.5827-2-lucas.demarchi@intel.com
We have several HAS_* checks for GuC and HuC but we mostly use HAS_GUC
and HAS_HUC, with only 1 exception. Since our HW always has either
both uC or neither of them, just replace all the checks with a unified
HAS_UC.
v2: use HAS_GT_UC (Michal)
v3: fix comment (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725001813.4740-2-daniele.ceraolospurio@intel.com
To identify the HDCP capability of the display connected to CI
systems, we need to add the hdcp capability probing in i915_display_info.
This will also help to populate the HDCP capability of the CI systems
to CI H/W logs maintained at https://intel-gfx-ci.01.org/hardware/.
It will facilitate to determine the kms_content_protection behavior on
a particular CI system.
v2: Reused the intel_hdcp_info() in i915_hdcp_sink_capability_show(). [Ram]
Shifted intel_hdcp_info() to the end of intel_dp_info. [Ram]
v3: used seq_puts() instead of seq_pritnf(). [Ram]
Cc: daniel.vetter@intel.com
Cc: ramalingam.c@intel.com
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719055513.2089-1-anshuman.gupta@intel.com
There is some scenarios that we are aware that sink probe can fail,
so lets add the infrastructure to let hotplug() hook to request
another probe after some time.
v2: Handle shared HPD pins (Imre)
v3: Rebased
v4: Renamed INTEL_HOTPLUG_NOCHANGE to INTEL_HOTPLUG_UNCHANGED to keep
it consistent(Rodrigo)
v5: Making the working queue used explicit through all the callers to
hotplug_work (Ville)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712005343.24571-1-jose.souza@intel.com
Being part of the GT HW, it make sense to keep the guc/huc structures
inside the GT structure. To help with the encapsulation work done by the
following patches, both structures are placed inside a new intel_uc
container. Although this results in code with ugly nested dereferences
(i915->gt.uc.guc...), it saves us the extra work required in moving
the structures twice (i915 -> gt -> uc). The following patches will
reduce the number of places where we try to access the guc/huc
structures directly from i915 and reduce the ugliness.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-7-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Both microcontrollers are part of the GT HW and are closely related to
GT operations. To keep all the files cleanly together, they've been
placed in their own subdir inside the gt/ folder
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713100016.8026-6-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Having taken the first step in encapsulating the functionality by moving
the related files under gt/, the next step is to start encapsulating by
passing around the relevant structs rather than the global
drm_i915_private. In this step, we pass intel_gt to intel_reset.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712192953.9187-1-chris@chris-wilson.co.uk
The patch adds the new power wells introduced by TGL (GEN 12) and
maps these to existing/new power domains. The changes for GEN 12 wrt
to GEN 11 are the following:
- Transcoder#EDP removed from power well#1 (Transcoder#A used in
low-power mode instead)
- Transcoder#A is now backed by power well#1 instead of power well#3
- The DDI#B/C combo PHY ports are now backed by power well#1 instead of
power well#3
- New power well#5 added for pipe#D functionality (TODO)
- 2 additional TC ports (TC#5-6) backed by power well#3, 2 port
specific IO power wells (only for the non-TBT modes) and 4 port
specific AUX power wells (2-2 for TBT vs. non-TBT modes)
- Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for
eDP and MIPI DSI (TODO)
On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and
BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we
have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-B
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI#C-F
Starting from GEN 12 we have the following naming for ports:
- Combo PHYs (native DP/HDMI):
DDI#A-C
- TBT/non-TBT (TC altmode, native DP/HDMI) PHYs:
DDI TC#1-6
To save some space in the power domain enum the power domain naming in
the driver reflects the above change, that is power domains TC#1-3 are
added as aliases for DDI#D-F and new power domains are reserved for
TC#4-6.
v2 (Lucas):
- Separate out the bits and definitions for TGL from the ICL ones.
Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since
we don't define TRANSCODER_A_VDSC power domain to spare a one bit in
the bitmask (suggested by Ville)
v3 (Lucas):
- Fix missing squashes on v2
- Rebase on renamed TRANSCODER_EDP_VDSC
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com
We originally added support, in some cases partial, for different modes
of operations via guc clients:
- proxy vs direct submission;
- variable engine mask per-client.
We only ever used one flow (all submissions via a single proxy), so the
other code paths haven't been exercised and are most likely
non-functional. The guc firmware interface is also in the process of
being updated to better fit the i915 flow and our client abstraction
will need to change accordingly (or possibly go away entirely), so these
old unused paths can be considered dead and removed.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Matthew Brost <Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-3-daniele.ceraolospurio@intel.com
Preemption via GuC submission is not being supported with its current
legacy incarnation. The current FW does support a similar pre-emption
flow via H2G, but it is class-based instead of being instance-based,
which doesn't fit well with the i915 tracking. To fix this, the
firmware is being updated to better support our needs with a new flow,
so we can safely remove the old code.
v2 (Daniele): resurrect & rebase, reword commit message, remove
preempt_context as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190710005437.3496-2-daniele.ceraolospurio@intel.com
Although polling each engine quickly is preferable as it should give us
a sample of each engine at roughly the same time, keep it simple and
just sample the engine as print out the debug state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704200455.14870-3-chris@chris-wilson.co.uk
When eliminating our use of drm_irq_install() I failed to convert
all our synchronize_irq() calls to consult pdev->irq instead of
dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq
we're no longer synchronizing against anything.
v2: Add intel_syncrhonize_irq() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Imre Deak <imre.deak@intel.com>
Fixes: b318b82455 ("drm/i915: Nuke drm_driver irq vfuncs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
Remove the accumulated optimisations that we have for i915_vma_retire
and reduce it to the bare essential of tracking the active object
reference. This allows us to only use atomic operations, and so will be
able to avoid the struct_mutex requirement.
The principal loss here is the shrinker MRU bumping, so now if we have
to shrink, we will do so in much more random order and more likely to
try and shrink recently used objects. That is a nuisance, but shrinking
active objects is a second step we try to avoid and will always be a
system-wide performance issue.
The other loss is here is in the automatic pruning of the
reservation_object when idling. This is not as large an issue as upon
reservation_object introduction as now adding new fences into the object
replaces already signaled fences, keeping the array compact. But we do
lose the auto-expiration of stale fences and unused arrays. That may be
a noticeable problem for which we need to re-implement autopruning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621183801.23252-3-chris@chris-wilson.co.uk
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613145229.21389-1-jani.nikula@intel.com
Now that we have a new subdirectory for display code, continue by moving
modesetting core code.
display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.
v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.
v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile file lists and sort them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
Matching the underlying get/put functions.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com
The functions where internally already only using the structure, so we
need to just flip the interface.
v2: rebase
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com
Focusing on the functions called in few places.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-6-daniele.ceraolospurio@intel.com
As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk
With async binding, we don't want to manage a bound/unbound list as we
may end up running before we even acquire the pages. All that is
required is keeping track of shrinkable objects, so reduce it to the
minimum list.
Fixes: 6951e5893b ("drm/i915: Move GEM object domain management from struct_mutex to local")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612105720.30310-1-chris@chris-wilson.co.uk
The intent is to be able to update the mm.lists from inside an irqsoff
section (e.g. from a softirq rcu workqueue), ergo we need to make the
i915->mm.obj_lock irqsafe.
v2: can_discard_pages() ensures we are shrinkable
v3: Beware shadowing of 'flags'
Fixes: 3b4fa9640c ("drm/i915: Track the purgeable objects on a separate eviction list")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110869
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610145430.17717-1-chris@chris-wilson.co.uk
Currently, we try to report to the shrinker the precise number of
objects (pages) that are available to be reaped at this moment. This
requires searching all objects with allocated pages to see if they
fulfill the search criteria, and this count is performed quite
frequently. (The shrinker tries to free ~128 pages on each invocation,
before which we count all the objects; counting takes longer than
unbinding the objects!) If we take the pragmatic view that with
sufficient desire, all objects are eventually reapable (they become
inactive, or no longer used as framebuffer etc), we can simply return
the count of pinned pages maintained during get_pages/put_pages rather
than walk the lists every time.
The downside is that we may (slightly) over-report the number of
objects/pages we could shrink and so penalize ourselves by shrinking
more than required. This is mitigated by keeping the order in which we
shrink objects such that we avoid penalizing active and frequently used
objects, and if memory is so tight that we need to free them we would
need to anyway.
v2: Only expose shrinkable objects to the shrinker; a small reduction in
not considering stolen and foreign objects.
v3: Restore the tracking from a "backup" copy from before the gem/ split
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-2-chris@chris-wilson.co.uk
Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
slice * subslice stride + subslice index / 8
v2: fix spacing in set_sseu_info args
use set_sseu_info to initialize sseu data when building
device status in debugfs
rename variables in intel_engine_types.h to avoid checkpatch
warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
return the correct subslice enable in for_each_instdone
add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
use printk formatted string for subslice mask
v7: remove string.h header and rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
Move functions to intel_sseu.h and remove inline qualifier.
Additionally, ensure these are all prefixed with intel_sseu_*
to match the convention of other functions in i915.
v2: fix spacing from checkpatch warning
v3: squash helper function changes into a single patch
break 80 character line to fix checkpatch warning
move get/set_eus helpers to intel_device_info.c
v4: Remove intel_ prefix from static functions in
intel_device_info.c and correctly copy changes
to stride calculation in those functions.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
Add a new function to return the number of subslices per slice to
consolidate code usage.
v2: rebase on changes to move sseu struct to intel_sseu.h
v3: add intel_* prefix to sseu_subslices_per_slice
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-4-stuart.summers@intel.com
The pcode mailbox has two data registers. So far we've only ever used
the one, but that's about to change. Expose the second data register to
the callers of sandybridge_pcode_read().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521164025.30225-1-ville.syrjala@linux.intel.com
To overcome display engine stride limits we'll want to remap the
pages in the GTT. To that end we need a new gtt_view type which
is just like the "rotated" type except not rotated.
v2: Use intel_remapped_plane_info base type
s/unused/unused_mbz/ (Chris)
Separate BUILD_BUG_ON()s (Chris)
Use I915_GTT_PAGE_SIZE (Chris)
v3: Use i915_gem_object_get_dma_address() (Chris)
Trim the sg (Tvrtko)
v4: Actually trim this time. Limit the max length
to one row of pages to keep things simple
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
