The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.
Change that back to mlx5e_get_num_lag_ports(mdev).
Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.
This fixes the following errors that might appear in kernel log:
mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22)
mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22
Fixes: b25bd37c85 ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Revert "net/mlx5: Implement management PF Ethernet profile"
This reverts commit 22c4640698.
Revert "net/mlx5: Enable SD feature"
This reverts commit c88c49ac9c.
Revert "net/mlx5e: Block TLS device offload on combined SD netdev"
This reverts commit 83a59ce005.
Revert "net/mlx5e: Support per-mdev queue counter"
This reverts commit d72baceb92.
Revert "net/mlx5e: Support cross-vhca RSS"
This reverts commit c73a3ab8fa.
Revert "net/mlx5e: Let channels be SD-aware"
This reverts commit e4f9686bde.
Revert "net/mlx5e: Create EN core HW resources for all secondary devices"
This reverts commit c4fb94aa82.
Revert "net/mlx5e: Create single netdev per SD group"
This reverts commit e2578b4f98.
Revert "net/mlx5: SD, Add informative prints in kernel log"
This reverts commit c82d360325.
Revert "net/mlx5: SD, Implement steering for primary and secondaries"
This reverts commit 605fcce33b.
Revert "net/mlx5: SD, Implement devcom communication and primary election"
This reverts commit a45af9a967.
Revert "net/mlx5: SD, Implement basic query and instantiation"
This reverts commit 63b9ce944c.
Revert "net/mlx5: SD, Introduce SD lib"
This reverts commit 4a04a31f49.
Revert "net/mlx5: Fix query of sd_group field"
This reverts commit e04984a373.
Revert "net/mlx5e: Use the correct lag ports number when creating TISes"
This reverts commit a7e7b40c4b.
There are some unanswered questions on the list, and we don't
have any docs. Given the lack of replies so far and the fact
that v6.8 merge window has started - let's revert this and
revisit for v6.9.
Link: https://lore.kernel.org/all/20231221005721.186607-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add management PF modules, which introduce support for the structures
needed to create the resources for the MGMT PF to work.
Also, add the necessary calls and functions to establish this
functionality.
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Each queue counter object counts some events (in hardware) for the RQs
that are attached to it, like events of packet drops due to no receive
WQE (rx_out_of_buffer).
Each RQ can be attached to a queue counter only within the same vhca. To
still cover all RQs with these counters, we create multiple instances,
one per vhca.
The result that's shown to the user is now the sum of all instances.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Implement driver support for the HW feature that allows RX steering of
one device to target other device's RQs.
In SD multi-mdev netdev mode, we set the secondaries into silent mode,
disconnecting them from the network. This feature is then used to steer
traffic from the primary to the secondaries.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Distribute the channels between the different SD-devices to acheive
local numa node performance on multiple numas.
Each channel works against one specific mdev, creating all datapath
queues against it.
We distribute channels to mdevs in a round-robin policy.
Example for 2 mdevs and 6 channels:
+-------+---------+
| ch ix | mdev ix |
+-------+---------+
| 0 | 0 |
| 1 | 1 |
| 2 | 0 |
| 3 | 1 |
| 4 | 0 |
| 5 | 1 |
+-------+---------+
This round-robin distribution policy is preferred over another suggested
intuitive distribution, in which we first distribute one half of the
channels to mdev #0 and then the second half to mdev #1.
We prefer round-robin for a reason: it is less influenced by changes in
the number of channels. The mapping between channel index and mdev is
fixed, no matter how many channels the user configures. As the channel
stats are persistent to channels closure, changing the mapping every
single time would turn the accumulative stats less representing of the
channel's history.
Per-channel objects should stop using the primary mdev (priv->mdev)
directly, and instead move to using their own channel's mdev.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Traffic queues will be created on all devices, including the
secondaries. Create the needed core layer resources for them as well.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Integrate the SD library calls into the auxiliary_driver ops in
preparation for creating a single netdev for the multiple devices
belonging to the same SD group.
SD is still disabled at this stage. It is enabled by a downstream patch
when all needed parts are implemented.
The netdev is created only when the SD group, with all its participants,
are ready. It is later destroyed if any of the participating devices
drops.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.
Change that back to mlx5e_get_num_lag_ports(mdev).
Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.
Fixes: b25bd37c85 ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Preparation for mlx5e socket direct feature.
Socket direct will allow multiple PF devices attached to different
NUMA nodes but sharing the same physical port.
The following series is a small refactoring series in preparation
to support socket direct in the following submission.
Highlights:
- Define required device registers and bits related to socket direct
- Flow steering re-arrangements
- Generalize TX objects (TISs) and store them in a common object, will
be useful in the next series for per function object management.
- Decouple raw CQ objects from their parent netdev priv
- Prepare devcom for Socket Direct device group discovery.
Please see the individual patches for more information.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmV6YnQACgkQSD+KveBX
+j48MggAi+iKb6supNWaDkSufLsJu7R56jCJK/mHEl/3586wsoiAx8e7BcAzB2FS
J6xfEJOwC++slNlIubWgEAvH8vv8YHI0K8q4+IUaC19FY3uy9z4GdPAAvzhqUbQ7
D1kWQZ4KIwDb5FbniwHw4V88ZBAGXl5Rhm7Wk/T90B4aG3hyGCeYOlsd0DnWNUae
ea7OkMI1s7QZkJ2HL1KS3xy6WMfrTi8G0TnznP0iLX51FYHciIujp0lfeZZlAJgo
+ovMUl2TTKb0yuKuWBapOz6w7le8VixWp7LbVYyd/wVZ1jBQuScgYHA6EeUKhdb8
9rZ726sSNtMjfebcx85KgkYYNleEKA==
=e11K
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-12-13
Preparation for mlx5e socket direct feature.
Socket direct will allow multiple PF devices attached to different
NUMA nodes but sharing the same physical port.
The following series is a small refactoring series in preparation
to support socket direct in the following submission.
Highlights:
- Define required device registers and bits related to socket direct
- Flow steering re-arrangements
- Generalize TX objects (TISs) and store them in a common object, will
be useful in the next series for per function object management.
- Decouple raw CQ objects from their parent netdev priv
- Prepare devcom for Socket Direct device group discovery.
Please see the individual patches for more information.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make CQ struct and methods independent of "priv", use more basic
arguments instead.
This will ease the transition to netdev with multiple mdevs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Turn some of the struct auxiliary_driver ops into wrappers to stop
having dummy local vars passed as unused arguments.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. Messages from
Send Queues get segmented and transmitted by the TIS including all
transport required implications, e.g. in the case of large send offload,
the TIS is responsible for the segmentation.
These are stateless objects and can be used by multiple netdevs (e.g.
representors) who share the same core device.
Providing the TISes as a service from the core layer to the netdev layer
reduces the number of replecated TIS objects (in case of multiple
netdevs), and will ease the transition to netdev with multiple mdevs.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
TLS TISes are created using their own dedicated functions,
don't honor their specific logic here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Due to the cited patch, devlink health commands take devlink lock and
this may result in deadlock for mlx5e_tx_reporter as it takes local
state_lock before calling devlink health report and on the other hand
devlink health commands such as diagnose for same reporter take local
state_lock after taking devlink lock (see kernel log below).
To fix it, remove local state_lock from mlx5e_tx_timeout_work() before
calling devlink_health_report() and take care to cancel the work before
any call to close channels, which may free the SQs that should be
handled by the work. Before cancel_work_sync(), use current_work() to
check we are not calling it from within the work, as
mlx5e_tx_timeout_work() itself may close the channels and reopen as part
of recovery flow.
While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to
ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock()
and a flag to avoid deadlock by calling cancel_work_sync() before
closing the channels while holding rtnl_lock too.
Kernel log:
======================================================
WARNING: possible circular locking dependency detected
6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted
------------------------------------------------------
kworker/u16:2/65 is trying to acquire lock:
ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0
but task is already holding lock:
ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&priv->state_lock){+.+.}-{3:3}:
__mutex_lock+0x12c/0x14b0
mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core]
devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x2e9/0x530
netlink_rcv_skb+0x11d/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x438/0x710
netlink_sendmsg+0x788/0xc40
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x1c1/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
-> #0 (&devlink->lock_key#2){+.+.}-{3:3}:
__lock_acquire+0x2c8a/0x6200
lock_acquire+0x1c1/0x550
__mutex_lock+0x12c/0x14b0
devlink_health_report+0x2f1/0x7e0
mlx5e_health_report+0xc9/0xd7 [mlx5_core]
mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core]
mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core]
process_one_work+0x7c2/0x1340
worker_thread+0x59d/0xec0
kthread+0x28f/0x330
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&priv->state_lock);
lock(&devlink->lock_key#2);
lock(&priv->state_lock);
lock(&devlink->lock_key#2);
*** DEADLOCK ***
4 locks held by kworker/u16:2/65:
#0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340
#1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340
#2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core]
#3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
stack backtrace:
CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
check_noncircular+0x278/0x300
? print_circular_bug+0x460/0x460
? find_held_lock+0x2d/0x110
? __stack_depot_save+0x24c/0x520
? alloc_chain_hlocks+0x228/0x700
__lock_acquire+0x2c8a/0x6200
? register_lock_class+0x1860/0x1860
? kasan_save_stack+0x1e/0x40
? kasan_set_free_info+0x20/0x30
? ____kasan_slab_free+0x11d/0x1b0
? kfree+0x1ba/0x520
? devlink_health_do_dump.part.0+0x171/0x3a0
? devlink_health_report+0x3d5/0x7e0
lock_acquire+0x1c1/0x550
? devlink_health_report+0x2f1/0x7e0
? lockdep_hardirqs_on_prepare+0x400/0x400
? find_held_lock+0x2d/0x110
__mutex_lock+0x12c/0x14b0
? devlink_health_report+0x2f1/0x7e0
? devlink_health_report+0x2f1/0x7e0
? mutex_lock_io_nested+0x1320/0x1320
? trace_hardirqs_on+0x2d/0x100
? bit_wait_io_timeout+0x170/0x170
? devlink_health_do_dump.part.0+0x171/0x3a0
? kfree+0x1ba/0x520
? devlink_health_do_dump.part.0+0x171/0x3a0
devlink_health_report+0x2f1/0x7e0
mlx5e_health_report+0xc9/0xd7 [mlx5_core]
mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core]
? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core]
? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core]
? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core]
? mutex_lock_io_nested+0x1320/0x1320
? process_one_work+0x70f/0x1340
? lockdep_hardirqs_on_prepare+0x400/0x400
? lock_downgrade+0x6e0/0x6e0
mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core]
process_one_work+0x7c2/0x1340
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0x230/0x230
? rwlock_bug.part.0+0x90/0x90
worker_thread+0x59d/0xec0
? process_one_work+0x1340/0x1340
kthread+0x28f/0x330
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: c90005b5f7 ("devlink: Hold the instance lock in health callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWiCPAAKCRDbK58LschI
g4djAQC1FdqCRIFkhbiIRNHTgHjnfQShELQbd9ofJqzylLqmmgD+JI1E7D9SXagm
pIXQ26EGmq8/VcCT3VLncA8EsC76Gg4=
=Xowm
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3 ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TX timestamp:
- requires passing clock, not sure I'm passing the correct one (from
cq->mdev), but the timestamp value looks convincing
TX checksum:
- looks like device does packet parsing (and doesn't accept custom
start/offset), so I'm ignoring user offsets
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-5-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link page pool instances to netdev for the drivers which
already link to NAPI. Unless the driver is doing something
very weird per-NAPI should imply per-netdev.
Add netsec as well, Ilias indicates that it fits the mold.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The netdev->features is initialized to netdev->hw_features at a later
point in the flow. Remove any redundant earlier assignment.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count
handling is unified and page_pool_alloc_frag() is supported
in 32-bit arch with 64-bit DMA, so remove it.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Lorenzo Bianconi <lorenzo@kernel.org>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Liang Chen <liangchen.linux@gmail.com>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20231020095952.11055-3-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Data center server CPUs number keeps getting larger with time.
Currently, our driver limits the number of channels to 128.
Maximum channels number is enforced and bounded by hardcoded
defines (en.h/MLX5E_MAX_NUM_CHANNELS) even though the device and machine
(CPUs num) can allow more.
Refactor current implementation in order to handle further channels.
The maximum supported channels number will be increased in the followup
patch.
Introduce RQT size calculation/allocation scheme below:
1) Preserve current RQT size of 256 for channels number up to 128 (the
old limit).
2) For greater channels number, RQT size is calculated by multiplying
the channels number by 2 and rounding up the result to the nearest
power of 2. If the calculated RQT size exceeds the maximum supported
size by the NIC, fallback to this maximum RQT size
(1 << log_max_rqt_size).
Since RQT size is no more static, allocate and free the indirection
table SW shadow dynamically.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Leon Romanovsky says:
====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
====================
Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1e66220948 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs
flag change") seems to have accidentally inverted the logic added in
commit 0bc73ad46a ("net/mlx5e: Mutually exclude RX-FCS and
RX-port-timestamp").
The impact of this is a little unclear since it seems the FCS scattered
with RX-FCS is (usually?) correct regardless.
Fixes: 1e66220948 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change")
Tested-by: Charlotte Tan <charlotte@extrahop.com>
Reviewed-by: Charlotte Tan <charlotte@extrahop.com>
Cc: Adham Faris <afaris@nvidia.com>
Cc: Aya Levin <ayal@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Moshe Shemesh <moshe@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Will Mortensen <will@extrahop.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the master device is unbinded, make sure to clean up all of the
steering rules or flow tables that were created over the master, in
order to allow proper unbinding of master, and for ethernet traffic
to continue to work independently.
Upon bringing master device back up and attaching the slave to it,
checks if the slave already has IPsec configured and if so reconfigure
the rules needed to support RoCE traffic.
Note that while master device is unbound, the user is unable to
configure IPsec again, since they are in a kind of illegal state in
which they are in MPV mode but the slave has no master.
However if IPsec was configured before hand, it will continue to work
for ethernet traffic while master is unbound, and would continue to
work for all traffic when the master is bound back again.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/8434e88912c588affe51b34669900382a132e873.1695296682.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If the device is in MPV mode, the ethernet driver would now register
to events from IB driver about core devices affiliation or
de-affiliation.
Use the key provided in said event to connect each mlx5e priv
instance to it's master counterpart, this way the ethernet driver
is now aware of who is his master core device and even more, such
as knowing if partner device has IPsec configured or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/279adfa0aa3a1957a339086f2c1739a50b8e4b68.1695296682.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c59 ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
1) Few cleanups
2) Dynamic completion EQs
The driver creates completion EQs for all vectors directly on driver
load, even if those EQs will not be utilized later on.
To allow more flexibility in managing completion EQs and to reduce the
memory overhead of driver load, this series will adjust completion EQs
creation to be dynamic. Meaning, completion EQs will be created only
when needed.
Patch #1 introduces a counter for tracking the current number of
completion EQs.
Patches #2-6 refactor the existing infrastructure of managing completion
EQs and completion IRQs to be compatible with per-vector
allocation/release requests.
Patches #7-8 modify the CPU-to-IRQ affinity calculation to be resilient
in case the affinity is requested but completion IRQ is not allocated yet.
Patch #9 function rename.
Patch #10 handles the corner case of SF performing an IRQ request when no
SF IRQ pool is found, and no PF IRQ exists for the same vector.
Patch #11 modify driver to use dynamically allocate completion EQs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmTRL7AACgkQSD+KveBX
+j69VggA0+5AO3WkMOy6055/HQoSiO/UqdSwyZhedu9nUFtQmmybIkkqghebTZgO
+tLMjSzPjkhtnY70Fybb+MAH2QiOVO7MxMvg99punmhpB1RBYSo7mg2WG/la55A1
E+ocN6uL0Jv2HUXbECSM8OhGOOf6wJNXRk9kzc6AJWsmun356HveaW8n8hp0JCJr
hnqbyPZJjLAYlcXH9jjvseCW7tHZH30WPAoYqVXRMao8LPbvjCWlinw3gntmet0f
746oxkNapZrHj+lHHrmGRr23+pOWZGW0nt8cxJlXHd0yDP116RDDf64gcop92AYX
YWVe8whSb2yp6FcscNtb1Vt5vw/c9w==
=e5aZ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-07
1) Few cleanups
2) Dynamic completion EQs
The driver creates completion EQs for all vectors directly on driver
load, even if those EQs will not be utilized later on.
To allow more flexibility in managing completion EQs and to reduce the
memory overhead of driver load, this series will adjust completion EQs
creation to be dynamic. Meaning, completion EQs will be created only
when needed.
Patch #1 introduces a counter for tracking the current number of
completion EQs.
Patches #2-6 refactor the existing infrastructure of managing completion
EQs and completion IRQs to be compatible with per-vector
allocation/release requests.
Patches #7-8 modify the CPU-to-IRQ affinity calculation to be resilient
in case the affinity is requested but completion IRQ is not allocated yet.
Patch #9 function rename.
Patch #10 handles the corner case of SF performing an IRQ request when no
SF IRQ pool is found, and no PF IRQ exists for the same vector.
Patch #11 modify driver to use dynamically allocate completion EQs.
* tag 'mlx5-updates-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Bridge, Only handle registered netdev bridge events
net/mlx5: E-Switch, Remove redundant arg ignore_flow_lvl
net/mlx5: Fix typo reminder -> remainder
net/mlx5: remove many unnecessary NULL values
net/mlx5: Allocate completion EQs dynamically
net/mlx5: Handle SF IRQ request in the absence of SF IRQ pool
net/mlx5: Rename mlx5_comp_vectors_count() to mlx5_comp_vectors_max()
net/mlx5: Add IRQ vector to CPU lookup function
net/mlx5: Introduce mlx5_cpumask_default_spread
net/mlx5: Implement single completion EQ create/destroy methods
net/mlx5: Use xarray to store and manage completion EQs
net/mlx5: Refactor completion IRQ request/release handlers in EQ layer
net/mlx5: Use xarray to store and manage completion IRQs
net/mlx5: Refactor completion IRQ request/release API
net/mlx5: Track the current number of completion EQs
====================
Link: https://lore.kernel.org/r/20230807175642.20834-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length") added the nla_len check in rtnl_bridge_setlink,
which is the only caller for ndo_bridge_setlink handlers defined in
low-level driver codes. Hence, this patch cleanups the redundant checks in
each ndo_bridge_setlink handler function.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807091347.3804523-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split types and pure function declarations from page_pool.h
and add them in page_page/types.h, so that C sources can
include page_pool.h and headers should generally only include
page_pool/types.h as suggested by jakub.
Rename page_pool.h to page_pool/helpers.h to have both in
one place.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com
[Jakub: change microsoft/mana, fix kdoc paths in Documentation]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, once driver load completes, IRQ requests were performed for all
vectors. However, as we move to support dynamic creation of EQs, this will
not be the case as some IRQs will not exist at this stage. Thus, in such
case, use the default CPU to IRQ mapping which is the serial mapping based
on IRQ vector index. Meaning, the n'th vector gets mapped to the n'th CPU.
Introduce an API function mlx5_comp_vector_cpu() that takes an IRQ index and
provides the corresponding CPU mapping. It utilizes the existing IRQ
affinity if defined, or resorts to the default serialized CPU mapping
otherwise.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the regular rq is reactivated after the XSK socket is closed
it could be reading stale cqes which eventually corrupts the rq.
This leads to no more traffic being received on the regular rq and a
crash on the next close or deactivation of the rq.
Kal Cuttler Conely reported this issue as a crash on the release
path when the xdpsock sample program is stopped (killed) and restarted
in sequence while traffic is running.
This patch flushes all cqes when during the rq flush. The cqe flushing
is done in the reset state of the rq. mlx5e_rq_to_ready code is moved
into the flush function to allow for this.
Fixes: 082a9edf12 ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commits missed passing frag_size to __xdp_rxq_info_reg, which
is required by bpf_xdp_adjust_tail to support growing the tail pointer
in fragmented packets. Pass the missing parameter when the current RQ
mode allows XDP multi buffer.
Fixes: ea5d49bdae ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Fixes: 9cb9482ef1 ("net/mlx5e: Use fragments of the same size in non-linear legacy RQ with XDP")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The msglvl support was implemented using the mlx5e_dbg() macro which is
rarely used in the driver, and is not very useful when you can just use
dynamic debug instead.
Remove mlx5e_dbg() and convert its usages to netdev_dbg().
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As priv->dfs_root is cleared, and therefore missed, when change
eswitch mode, move the creation of the root debugfs to the init
callback of mlx5e_nic_profile and mlx5e_uplink_rep_profile, and
the destruction to the cleanup callback for symmeter.
Fixes: 288eca60cc ("net/mlx5e: Add Ethernet driver debugfs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As part of switchdev mode disablement, driver changes port netdevice
profile from uplink to nic. If this process is triggered by health
recovery flow (PCI reset, for ex.) profile attach would fail because all
fw commands aborted when internal error flag is set. As a result, nic
netdevice profile is not attached and driver fails to rollback to uplink
profile, which leave driver in broken state and cause crash later.
To handle broken state do netdevice profile initialization only instead
of full attachment and release mdev resources on driver suspend as
expected. Actual netdevice attachment is done during driver load.
Fixes: c4d7eb5768 ("net/mxl5e: Add change profile method")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.
Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.
This fix applies only for legacy rq.
Fixes: 1b1e486883 ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
1) Dragos Improves RX page pool, and provides some fixes to his previous series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRB6HcACgkQSD+KveBX
+j4+nAf/cCJ7poDQQOp/Oug6H3xn/COYPv3Iasl0dhT8yu+LlNMQTF0bRrU4UpAQ
aIKcja2biOBAnD96EhA1nJoo9bJUTtKLokUDDyK/xRHS+wIyr8Lia6vxTz1yjj3C
jDqX3+ZP4rFuhAvh+92AT1I0JvS0g+ocokPVKmm+Pwf4y7sG69CZ7phVGSc0iFfT
y+gnP4C6cdIr7kNLByeeX6alDHL/q83vfNFWrugRPna2uXjcSR5Gtp03pJ0OVkI5
qHxG7Bz0BE/hcMYwNcNVTu/5e02+5PS6B8kN/ho5DkhVFhp+h17XWWvOMZxC3jfI
k0ijRSWocG1jIgRgkioBRgzXmc6nNw==
=jUe8
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-20
1) Dragos Improves RX page pool, and provides some fixes to his previous
series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Update op_mode to op_mod for port selection
net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
net/mlx5e: RX, Hook NAPIs to page pools
net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
net/mlx5e: Add vnic devlink health reporter to representors
net/mlx5: Add vnic devlink health reporter to PFs/VFs
Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
Revert "net/mlx5: Expose steering dropped packets counter"
net/mlx5: DR, Add memory statistics for domain object
net/mlx5: DR, Add more info in domain dbg dump
net/mlx5: DR, Calculate sync threshold of each pool according to its type
net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================
Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable MACsec offload feature over VLAN by adding NETIF_F_HW_MACSEC
to the device vlan_features.
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On representor init rx error flow the flow steering pointer is being
released so mlx5e_attach_netdev() doesn't have a valid fs pointer
in its error flow. Make sure the pointer is nullified when released
and add a check in mlx5e_fs_cleanup() to verify fs is not null
as representor cleanup callback would be called anyway.
Fixes: af8bbf7300 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Linking the NAPI to the rq page_pool to improve page_pool cache
usage during skb recycling.
Here are the observed improvements for a iperf single stream
test case:
- For 1500 MTU and legacy rq, seeing a 20% improvement of cache usage.
- For 9K MTU, seeing 33-40 % page_pool cache usage improvements for
both striding and legacy rq (depending if the application is running on
the same core as the rq or not).
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Carolina Jubran