Recently 'cur_state' user space 'sysfs' interface 'sysfs' has been
deprecated. This interface is used in Nvidia systems for setting fan
speed limit. Currently fan speed limit is set from the user space by
setting 'sysfs' 'cur_state' attribute to 'max_state + n', where 'n' is
required limit, for example: 15 for 50% speed limit, 20 for full fan
speed enforcement.
The purpose of this feature is to provides ability to limit fan speed
according to some system wise considerations, like absence of some
replaceable units (PSU or line cards), high system ambient temperature,
unreliable transceivers temperature sensing or some other factors which
indirectly impacts system's airflow.
The motivation is to support fan low limit feature through 'hwmon'
interface.
Use 'hwmon' 'pwm' attribute for setting low limit for fan speed in
case 'thermal' subsystem is configured in kernel. In this case setting
fan speed through 'hwmon' will never let the 'thermal' subsystem to
select a lower duty cycle than the duty cycle selected with the 'pwm'
attribute.
From other side, fan speed is to be updated in hardware through 'pwm'
only in case the requested fan speed is above last speed set by
'thermal' subsystem, otherwise requested fan speed will be just stored
with no PWM update.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220126141825.13545-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver provides the same data as the asus_wmi_ec_sensors driver
(and gets it from the same source) but does not use WMI, polling
the ACPI EC directly.
That provides two enhancements: sensor reading became quicker (on some
systems or kernel configuration it took almost a full second to read
all the sensors, that transfers less than 15 bytes of data), the driver
became more flexible. The driver now relies on ACPI mutex to lock access
to the EC in the same way as the WMI code does.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220124015658.687309-2-eugene.shalygin@gmail.com
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Denis Pauk <pauk.denis@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: fb551405c0 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
msleep(1) will often sleep more than 20ms, slowing down sensor
and watchdog reads/writes. Use usleep_range() as recommended
in timers-howto.rst to fix that.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch enables the sch56xx-common module to get automatically
loaded on supported machines.
If a machine supports Fujitsu's SCH56XX-based hardware monitoring
solutions, it contains a "Antiope"/" Antiope" dmi onboard device
in case of the sch5627 or a "Theseus"/" Theseus" dmi onboard device
in case of the sch5636.
Since some machines like the Esprimo C700 have a seemingly faulty
DMI table containing both onboard devices, the driver still needs
to probe for the individual superio chip, which in presence of at
least one DMI onboard device however can be considered safe.
Also add a module parameter allowing for bypassing the
DMI check.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Right now, when sch56xx-common has detected a SCH5627/SCH5636
superio chip, the corresponding module is not automatically
loaded.
Fix that by adding the necessary device tables to both modules.
Tested on a Fujitsu Esprimo P720.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The recent addition of the label attribute added some code that read the
"label" device property, without checking first that "dev" was non-NULL.
Fix this issue by first checking that "dev" is non-NULL.
Fixes: ccd98cba6a18 ("hwmon: Add "label" attribute")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch adds support for Lattice's POWR1014 power manager IC.
Read access to all the ADCs on the chip are supported through
the "hwmon" "sysfs" files.
The main differences of POWR1014 compared to POWR1220 are
amount of VMON input lines: 10 on POWR1014 and 12 lines on POWR1220 and
number of output control signals: 14 on POWR1014 and 20 on POWR1220.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220118075611.10665-4-michaelsh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reduce code by using devm_hwmon_device_register_with_groups() API by
devm_hwmon_device_register_with_info() API.
The motivation is to reduce code and to allow easy support for similar
devices by the same driver.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220118075611.10665-3-michaelsh@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There's no need to complicate examples with a platform specific macro.
It also complicates example parsing to figure out the number of
interrupt cells in examples (based on bracketing).
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220119015514.2441231-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ASUS ROG STRIX B450-F GAMING II has support of the same WMI
monitoring method as ASUS ROG STRIX B450-F GAMING.
This commit adds "ASUS ROG STRIX B450-F GAMING II" to
the list of boards that can be monitored using ASUS WMI.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220112214917.11662-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Asus Prime X570-Pro motherboards have a T_Sensor header that can be
connected to an optional temperature probe.
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com>
Link: https://lore.kernel.org/r/20220111051842.25634-1-ajderossi@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add ABI file for informing remaining users of the
deprecation of the legacy /proc/i8k interface.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220109214248.61759-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver should be called dell_smm_hwmon, i8k is only
an alias now.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220109214248.61759-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Asus PRIME B550-PLUS motherboards have got an nct6775 chip. Its resource
range is covered by the \AMW0.SHWM OpRegion, so the chip is unusable
when using SIO. However ASUS WMI access works.
Add PRIME B550-PLUS to the list of motherboards using ASUS WMI to read
data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220110024712.753492-1-dmitry.baryshkov@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ASUS Pro B550M-C/PRIME B550M-A boards have got an nct6775 chip, but
by default there's no use of it because of resource conflict with WMI
method.
This commit adds "Pro B550M-C" and "PRIME B550M-A" to
the list of boards that can be monitored using ASUS WMI.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Gregory P. Smith <greg@krypto.org>
Tested-by: Joel Wirāmu <jwp@redhat.com>
Tested-by: Jonathan Farrugia <jonfarr87@gmail.com>
Link: https://lore.kernel.org/r/20220112215013.11694-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If a label is defined in the device tree for this device add that
to the device specific attributes. This is useful for userspace to
be able to identify an individual device when multiple identical
chips are present in the system.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220110182256.30763-3-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the "label" sysfs attribute, which can contain a descriptive label
that allows to uniquely identify a device within the system.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220110182256.30763-2-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These registers report CPU temperatures (and, depending on the system,
sometimes chipset temperatures) via the TSI interface on AMD systems.
They're distinct from most of the other Super-IO temperature readings
(CPUTIN, SYSTIN, etc.) in that they're not a selectable source for
monitoring and are in a different (higher resolution) format, but can
still provide useful temperature data.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Tested-by: Renze Nicolai <renze@rnplus.nl>
Link: https://lore.kernel.org/r/20220113164629.21924-1-zev@bewilderbeest.net
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to the March 2013 revision of the LM82 datasheet, the latest
LM82 die revision is 0x03. This was confirmed and observed with a real
chip. Further details in this revision of the LM82 datasheet suggest that
LM82 is now just a repackaged LM83. Such versions of LM82 will be detected
as LM83. Add comment to the code explaining why this may happen.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There should be no message in the kernel function if the detect function
fails to identify a chip; this is perfectly normal and does not warrant
a kernel log entry. Demote message to debug.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using local caching in this driver had few benefits. It used cached values
for two seconds and then re-read all registers from the chip even if the
user only accessed a single attribute. On top of that, alarm attributes
were stale for up to four seconds (the first status register read reports
and clears an alarm, the second reports it cleared). Use regmap instead
for caching. Do not re-read non-volatile registers, and do not cache
volatile registers.
As part of this change, handle register read and write address differences
in regmap code. This is necessary to avoid problems with caching in the
regmap core, and ultimately simplifies the code.
Also, errors observed when reading from and writing to registers are no
longer ignored.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It has no value to name a variable 'new_client' in probe and detect
functions; it is obvious that the client is new. Use 'client' as
variable name instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is no need to keep lm83_id at the end of the driver. Move it
forward to where it is needed to avoid a forward declaration.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Up to now udev events only report the affected hwmon device if an alert
is reported. This requires userspace to read all attributes if it wants
to know what triggered the event. Provide the attribute name with the
NAME property to help userspace find the attribute causing the event.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io
Fixes: ddbb4db4ce ("hwmon: (pmbus) Add regulator support")
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
resulted in a recursive locking problem in the VMD driver. The cure is to
cache the relevant information upfront instead of retrieving it at runtime.
-----BEGIN PGP SIGNATURE-----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=ukul
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a regression caused by the recent PCI/MSI rework
which resulted in a recursive locking problem in the VMD driver.
The cure is to cache the relevant information upfront instead of
retrieving it at runtime"
* tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI: vmd: Prevent recursive locking on interrupt allocation
- fix a swiotlb info leak (Halil Pasic)
-----BEGIN PGP SIGNATURE-----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=bR6d
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix a swiotlb info leak (Halil Pasic)
* tag 'dma-mapping-5.17-1' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix info leak with DMA_FROM_DEVICE
- Fix some drive strength and pull-up code in the K210 driver.
- Add the Alder Lake-M ACPI ID so it starts to work properly.
- Use a static name for the StarFive GPIO irq_chip, forestalling
an upcoming fixes series from Marc Zyngier.
- Fix an ages old bug in the Tegra 186 driver where we were
indexing at random into struct and being lucky getting the
right member.
-----BEGIN PGP SIGNATURE-----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=es6M
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix some drive strength and pull-up code in the K210 driver.
- Add the Alder Lake-M ACPI ID so it starts to work properly.
- Use a static name for the StarFive GPIO irq_chip, forestalling an
upcoming fixes series from Marc Zyngier.
- Fix an ages old bug in the Tegra 186 driver where we were indexing at
random into struct and being lucky getting the right member.
* tag 'pinctrl-v5-17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
gpio: tegra186: Fix chip_data type confusion
pinctrl: starfive: Use a static name for the GPIO irq_chip
pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
pinctrl: k210: Fix bias-pull-up
pinctrl: fix loop in k210_pinconf_get_drive()
- rtla (Real-Time Linux Analysis tool): fix typo in man page
- rtla: Update API -e to -E before it is released
- rlla: Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYho7XBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiOhAQDbCbEjIYwkGCpckuGgSQiMU4bAWUzk
jCz9PoaTxoIWJwEAsLWrAPb0pDzNwdEKjiC3fJoUJhz3NwlEjJ7hQ3BxzAI=
=iXOQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- rtla (Real-Time Linux Analysis tool):
- fix typo in man page
- Update API -e to -E before it is released
- Error message fix and memory leak fix
- Partially uninline trace event soft disable to shrink text
- Fix function graph start up test
- Have triggers affect the trace instance they are in and not top level
- Have osnoise sleep in the units it says it uses
- Remove unused ftrace stub function
- Remove event probe redundant info from event in the buffer
- Fix group ownership setting in tracefs
- Ensure trace buffer is minimum size to prevent crashes
* tag 'trace-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla/osnoise: Fix error message when failing to enable trace instance
rtla/osnoise: Free params at the exit
rtla/hist: Make -E the short version of --entries
tracing: Fix selftest config check for function graph start up test
tracefs: Set the group ownership in apply_options() not parse_options()
tracing/osnoise: Make osnoise_main to sleep for microseconds
ftrace: Remove unused ftrace_startup_enable() stub
tracing: Ensure trace buffer is at least 4096 bytes large
tracing: Uninline trace_trigger_soft_disabled() partly
eprobes: Remove redundant event type information
tracing: Have traceon and traceoff trigger honor the instance
tracing: Dump stacktrace trigger to the corresponding instance
rtla: Fix systme -> system typo on man page
memblock.{reserved,memory}.regions may be allocated using kmalloc() in
memblock_double_array(). Use kfree() to release these kmalloced regions.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmIZ1qgTHHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kXsaB/0TnrLt98t/jPvVGinsnf7r3hXnNq7F
8FXWqdUIBWRfiHVd74pX6VE4Be56BbMUUyRQWDfbjrluVFnBibA3qJhNmpIuwdSb
9GESikUdEnuq0t059yPLupKvYY0ysq4OjNLWage+8tnA/TzlN/+t27c75iZWwGn2
JbutM/j5YKnvAcqUVv/plLVIVrGz1RCaG0diYoY1vxrbpRCicmAI8LHTkK1Xtow2
7YVkRuQWY+yJLOJ/SCst5pxy6cm3R96KvnaC9fg1Pp+8wVFrZp/hDsH8nObFccXq
6zQTbXqS88VKOoNEcuqk2ITbFyghepPIBrliEmcI2h96OSdp6BtrNau7
=UpBU
-----END PGP SIGNATURE-----
Merge tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Use kfree() to release kmalloced memblock regions
memblock.{reserved,memory}.regions may be allocated using kmalloc()
in memblock_double_array(). Use kfree() to release these kmalloced
regions"
* tag 'fixes-2022-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: use kfree() to release kmalloced memblock regions
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, memfd,
and mm (hugetlb, kasan, hugetlbfs, pagemap, selftests, memcg, and
slab)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
selftests/memfd: clean up mapping in mfd_fail_write
mailmap: update Roman Gushchin's email
MAINTAINERS, SLAB: add Roman as reviewer, git tree
MAINTAINERS: add Shakeel as a memcg co-maintainer
MAINTAINERS: remove Vladimir from memcg maintainers
MAINTAINERS: add Roman as a memcg co-maintainer
selftest/vm: fix map_fixed_noreplace test failure
mm: fix use-after-free bug when mm->mmap is reused after being freed
hugetlbfs: fix a truncation issue in hugepages parameter
kasan: test: prevent cache merging in kmem_cache_double_destroy
mm/hugetlb: fix kernel crash with hugetlb mremap
MAINTAINERS: add sysctl-next git tree
* A fix for the K210 sdcard defconfig, to avoid using a fixed delay for
the root FS.
* A fix to make sure there's a proper call frame for
trace_hardirqs_{on,off}().
---
There are a handful of additional fixes in flight, but not for this
week.
-----BEGIN PGP SIGNATURE-----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=1a16
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the K210 sdcard defconfig, to avoid using a
fixed delay for the root FS
- A fix to make sure there's a proper call frame for
trace_hardirqs_{on,off}().
* tag 'riscv-for-linus-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix oops caused by irqsoff latency tracer
riscv: fix nommu_k210_sdcard_defconfig
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value.
-----BEGIN PGP SIGNATURE-----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=6ODm
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Nothing exciting, just more fixes for not returning sync_filesystem
error values (and eliding it when it's not necessary).
Summary:
- Only call sync_filesystem when we're remounting the filesystem
readonly readonly, and actually check its return value"
* tag 'xfs-5.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only bother with sync_filesystem during readonly remount
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm moving to a @linux.dev account. Map my old addresses.
Link: https://lkml.kernel.org/r/20220221200006.416377-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The slab code has an overlap with kmem accounting, where Roman has done
a lot of work recently and it would be useful to make sure he's CC'd on
patches that potentially affect it. Thus add him as a reviewer for the
SLAB subsystem.
Also while at it, add the link to slab git tree.
Link: https://lkml.kernel.org/r/20220222103104.13241-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have been contributing and reviewing to the memcg codebase for last
couple of years. So, making it official.
Link: https://lkml.kernel.org/r/20220224060148.4092228-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add myself as a memcg co-maintainer. My primary focus over last few
years was the kernel memory accounting stack, but I do work on some
other parts of the memory controller as well.
Link: https://lkml.kernel.org/r/20220221233951.659048-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marcello Sylvester Bauer