Core changes:
- Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries.
New drivers:
- Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450
pin control support.
Improvements:
- Serious cleanup of the recently merged aw9523 driver.
- Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single.
- A slew of device tree binding cleanups.
- Support a bus clock in the Samsung driver.
-----BEGIN PGP SIGNATURE-----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=9Ty5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries
New drivers:
- Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support
Improvements:
- Serious cleanup of the recently merged aw9523 driver
- Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single
- A slew of device tree binding cleanups
- Support a bus clock in the Samsung driver"
* tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
pinctrl: bcm2835: Make pin freeing behavior configurable
dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108
pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs
dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function
dt-bindings: pinctrl: mediatek: mt7622: fix array properties
pinctrl: samsung: drop redundant drvdata assignment
pinctrl: samsung: support a bus clock
dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces
pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
pinctrl: renesas: r8a779h0: Fix IRQ suffixes
pinctrl: renesas: rzg2l: Remove extra space in function parameter
dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
pinctrl: pinconf-generic: print hex value
pinctrl: realtek: fix module autoloading
pinctrl: qcom: sm7150: fix module autoloading
pinctrl: loongson2: fix module autoloading
pinctrl: mediatek: fix module autoloading
pinctrl: freescale: imx8ulp: fix module autoloading
dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
...
GPIO core:
- remove more unused legacy interfaces (after converting the last remaining
users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos
-----BEGIN PGP SIGNATURE-----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=mBWd
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski
"This was a quiet release cycle for the GPIO tree and so this
pull-request is relatively small.
We have one new driver, some minor improvements to the GPIO core code
and across several drivers, some DT and documentation updates but in
general nothing stands out or is controversial. All changes have spent
time in next with no reported issues (or ones that were quickly
fixed).
GPIO core:
- remove more unused legacy interfaces (after converting the last
remaining users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name
fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple
GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to
gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos"
* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
gpio: nuvoton: Fix sgpio irq handle error
gpiolib: Discourage to use formatting strings in line names
gpio: brcmstb: add support for gpio-ranges
gpio: of: support gpio-ranges for multiple gpiochip devices
dt-bindings: gpio: brcmstb: add gpio-ranges
gpio: Add Intel Granite Rapids-D vGPIO driver
gpio: brcmstb: Use dynamic GPIO base numbers
gpiolib: acpi: Set label for IRQ only lines
gpiolib: acpi: Add fwnode name to the GPIO interrupt label
gpiolib: Get rid of never false gpio_is_valid() calls
gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
gpiolib: acpi: Extract __acpi_find_gpio() helper
gpio: sch: Utilise temporary variable for struct device
gpio: sch: Switch to memory mapped IO accessors
gpio: regmap: Use -ENOTSUPP consistently
gpio: pcie-idio-24: Use -ENOTSUPP consistently
Documentation: gpio: Replace leading TABs by spaces in code blocks
gpiolib: acpi: Check for errors first in acpi_find_gpio()
...
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZjUIHwAKCRB4tDGHoIJi
0r8RAQD+B5rJde/sQuQlmkJGrmZfyE/6/I1ZFxv0/xHhRPNWRAD/RFTTDthL/7c4
frMGl/nWSD3fvGmXrQ7Dp6wc1APIdQI=
=BWHh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QGOJ
-----END PGP SIGNATURE-----
Merge tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
-----BEGIN PGP SIGNATURE-----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=33sC
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.10-1
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
-----BEGIN PGP SIGNATURE-----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=wjQ1
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.10
1. Add support for toggling bus clock (PCLK) for any pin controller
register accesses. This looks needed on newer Samsung chips, like
Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
The constants were moved to DTS headers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN.
So in case it was configured as GPIO_OUT before the configured output
level also get lost. As long as GPIO sysfs was used this wasn't
actually a problem because the pins and their possible output level
were kept by sysfs.
Since more and more Raspberry Pi users start using libgpiod they are
confused about this behavior. So make the pin freeing behavior of
GPIO_OUT configurable via module parameter. In case
pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is
kept.
This patch based on the downstream work of Phil Elwell.
Link: https://github.com/raspberrypi/linux/pull/6117
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20240503062745.11298-1-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix a double-free in the pinctrl_enable() errorpath.
- Fix a refcount leak in pinctrl_dt_to_map().
- Fix selecting the GPIO pin control state and the UART3
pin config group in the Intel Baytrail driver.
- Fix readback of schmitt trigger status in the Mediatek
Paris driver, along with some semantic pin config issues
in this driver.
- Fix a pin suffix typo in the Meson A1 driver.
- Fix an erroneous register offset in he Aspeed G6 driver.
- Fix an inconsistent lock state and the interrupt type on
resume in the Renesas RZG2L driver.
- Fix some minor confusion in the Renesas DT bindings.
-----BEGIN PGP SIGNATURE-----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=BG4d
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmYrfzYACgkQAEG6vDF+
4phXdw//ZmvCV76D3XGJsXnc2Ivv/uaOZKRhzI+IKn0U529hI2YscA9BfhiLZOOI
68KqWiScMTGH5Zn1oDC5wpIEj0i3S/2ZdXZXWSN35+ccsz6y2hbf2q2ciMl1Vrf0
co8kxiDABI+RBeGpiSVQ2Yp6TEnxkiNDNAfON+A+xxbHhhLxGLcCCO33xbJ9Ui7e
QpW2xan7AiSANRTUdvM21h00Uy1O/kAkcZJC2oLtCjUr3lzczrZkBCIor0jBE4VB
SmM9vvcjWdfLVdfgxeFEAFvxN0fI9RT8ALRyfWbnPcCb37GUUMwS+J/Dz+P3yUa9
6vGz4CCdXpC1lxcM2z5cZsAqwk3WS8LU840lJyb2+gGxLoSPwr1z0NWNCqZQppkp
5LDaFh2v5b34epMHRkNUHTytMBHy5p9c81TOSYH7S2bEsQTOi9qjviH0RqSjyR5A
s9+dlxfUiZfoE71UYQLO2E0knu3AwIRQ6oEkhbmLFedOVegkoTeYkaAfdyEAO+SH
vqLEX88wwMU6B+bjDnN7lYTuSXbZVKu66TZk6oqMVnv2BQ29pmOR3AFQdFNpLA8W
lRygSMEbADzNuJla5Az+VH2tWf1hOmpSsMIOAJbZ6/drv0yFnbBwgtGkAmkqEr68
IQxwJTVQmPlgqpsCATzV29qgSEosHDJo9LZw9/DtgTx5qGL/to0=
=WRU/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yce+
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.10
1. Basic support for SCMI v3.2 pincontrol protocol
SCMI v3.2 introduces pincontrol protocol which is intended for
controlling pins and their configuration. The pin control protocol
provides commands to:
- List the pins, groups of pins, available functions, and their
association with each other.
- Set the parameter configuration and multiplexing of the pins or
groups of pins
- Optionally request exclusive access to a pin or group of pins.
- Optionally configure the permissions of an agent to access a pin
or group of pins.
These changes adds basic support for the same in the SCMI core layer
and an implementation of the generic scmi-pinctrl driver with associated
DT bindings.
2. Framework support for multiple vendors custom protocols
With the fixed space for vendor protocols, the possibility of having
multiple vendors implementing distinct SCMI vendor protocols with
the same overlapping protocol number is very high and with the need
to support them all in a single kernel image or a module is also high.
In order to implement the same we assume:
- vendor protocols has to be tagged at build time with a vendor_id
- vendor protocols could also optionally be tagged at build time with
sub_vendor_id and implementation version
At the initialisation all the built vendor protocols are registered
with the SCMI core using a key derived from the above tags
3. Logging and tracing improvements
This includes using dev_err_probe() to bail out from probe, adding
message dump traces for bad and unexpected replies and widening of
the tag buffer in trace_scmi_dump_msg to allow diverse tag names
4. Miscellaneous updates or improvements
This includes adding the accessor function get_max_msg_size() used
in pinctl protocol, updation of dt-bindings examples for protocol@13
to promote new bindings and simplification of scmi_devm_notifier_unregister
* tag 'scmi-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
pinctrl: Implementation of the generic scmi-pinctrl driver
firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
dt-bindings: firmware: Support SCMI pinctrl protocol
firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
firmware: arm_scmi: Add support for multiple vendors custom protocols
dt-bindings: firmware: arm,scmi: Update examples for protocol@13
firmware: arm_scmi: Avoid non-constant printk format strings
firmware: arm_scmi: Use dev_err_probe to bail out
firmware: arm_scmi: Simplify scmi_devm_notifier_unregister
firmware: arm_scmi: Add message dump traces for bad and unexpected replies
firmware: arm_scmi: Add helper to trace bad messages
include: trace: Widen the tag buffer in trace_scmi_dump_msg
firmware: arm_scmi: Log the perf domain names in the error paths
Link: https://lore.kernel.org/r/20240426105031.1526987-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some Samsung-based SoCs there are separate bus clocks / gates each
for each pinctrl instance. To be able to access each pinctrl instance's
registers, this bus clock needs to be running, otherwise register
access will hang. Google Tensor gs101 is one example for such an
implementation.
Update the driver to handle this optional bus clock:
* handle an optional bus clock from DT
* prepare it during driver probe
* enclose all relevant register accesses with a clock enable & disable
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240426-samsung-pinctrl-busclock-v3-2-adb8664b8a7e@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* Correct GPIO selection and add UART3 pins for Intel Bay Trail
The following is an automated git shortlog grouped by driver:
baytrail:
- Add pinconf group for uart3
- Fix selecting gpio pinctrl state
-----BEGIN PGP SIGNATURE-----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=PWTy
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v6.9-1
* Correct GPIO selection and add UART3 pins for Intel Bay Trail
The following is an automated git shortlog grouped by driver:
baytrail:
- Add pinconf group for uart3
- Fix selecting gpio pinctrl state
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The RZ/G3S SoC supports configurable supply voltages for several of its
I/O interfaces. All of these interfaces support both 1.8V and 3.3V
supplies, but only the Ethernet and XSPI interfaces support a 2.5V
supply.
Voltage selection for the XSPI interface is not yet supported, so this
leaves only the Ethernet interfaces currently supporting selection of a
2.5V supply. So we need to return an error if there is an attempt to
select a 2.5V supply for any non-Ethernet interface.
Fixes: 51996952b8 ("pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240417114132.6605-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The suffixes of the IRQ identifiers, as used for pins related to the
Interrupt Controller for External Devices (INTC-EX), are inconsistent.
Correct them to match the Pin Multiplex attachment in Rev.0.51 of the
R-Car V4M Series Hardware User's Manual.
Fixes: 291f7856fc ("pinctrl: renesas: Initial R8A779H0 (R-Car V4M) PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7d3c7498d9e8eda5583b15f9163eb25bb797ed24.1713282028.git.geert+renesas@glider.be
Commit dce0919c83 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spurious interrupt issue the
setup of TINT has been moved in rzg2l_tint_set_edge() through
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.
Fixes: dce0919c83 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240419063822.3467424-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Hex value will be easier to match hardware register bits layout,
so same as pinconf_generic_dump_config, print hex value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20240412005128.2937486-1-peng.fan@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix a dtbs_check warning on RZ/G3S,
- Fix a lockdep warning on RZ/G2L.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZhkDAgAKCRCKwlD9ZEnx
cA0nAQC3qUp+KQ9D53F1Mr5FdQd4GhNsqEG/iFxHkkrlKLyMwQEA7nQHcu2xseeS
7C4wQROe2+DNdks5u3ye7IA7YtntYgY=
=wObz
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.9
- Fix a dtbs_check warning on RZ/G3S,
- Fix a lockdep warning on RZ/G2L.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-5-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Message-ID: <20240411064614.7409-4-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-3-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240411064614.7409-2-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-1-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If we fail to allocate propname buffer, we need to drop the reference
count we just took. Because the pinctrl_dt_free_maps() includes the
droping operation, here we call it directly.
Fixes: 91d5c5060e ("pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20240415105328.3651441-1-zengheng4@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pass the con_id instead of property so that callers won't repeat
the GPIO suffixes to try.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
GPIO_S0_SC57 / GPIO_S0_SC61 can be muxed to PCU_UART_TXD / PCU_UART_RXD,
add a pinconf group for this.
On Bay Trail board schematics using these pins as UART these are
called UART3_TXD / UART3_RXD, name the pinconf group "uart3_grp"
to be consistent with the schematics.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For all the "score" pin-groups all the intel_pingroup-s to select
the non GPIO function are re-used for byt_score_gpio_groups[].
But this is incorrect since a pin-group includes the mode setting,
which for the non GPIO functions generally is 1, where as to select
the GPIO function mode must be set to 0.
So the GPIO function needs separate intel_pingroup-s with their own mode
value of 0.
Add a new PIN_GROUP_GPIO macro which adds a foo_gpio entry to each
pin-group defined this way and update byt_score_gpio_groups[] to point
to the new foo_gpio entries.
The "sus" usb_oc_grp usb_ulpi_grp and pcu_spi_grp pin-groups are special
because these have a non 0 mode value to select the GPIO functions and
these already have matching foo_gpio pin-groups, leave these are unchanged.
The pmu_clk "sus" groups added in commit 2f46d7f7e9 ("pinctrl: baytrail:
Add pinconf group + function for the pmu_clk") do need to use the new
PIN_GROUP_GPIO macro.
Fixes: 2f46d7f7e9 ("pinctrl: baytrail: Add pinconf group + function for the pmu_clk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for read-write file to reduce some
duplicated code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-ID: <20240404193521.3581399-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl-single driver handles pin_config_set by looking up the
requested setting in a DT-defined lookup table, which defines what bits
correspond to each setting. There is no way to add
PIN_CONFIG_BIAS_DISABLE entries to the table, since there is instead
code to disable the bias by applying the disable values of both the
pullup and pulldown entries in the table.
However, this code is inside the table-lookup loop, so it would only
execute if there is an entry for PIN_CONFIG_BIAS_DISABLE in the table,
which can never exist, so this code never runs.
This commit lifts the offending code out of the loop, so it just
executes directly whenever PIN_CONFIG_BIAS_DISABLE is requested,
skippipng the table lookup loop.
This also introduces a new `param` variable to make the code slightly
more readable.
This bug seems to have existed when this code was first merged in commit
9dddb4df90 ("pinctrl: single: support generic pinconf"). Earlier
versions of this patch did have an entry for PIN_CONFIG_BIAS_DISABLE in
the lookup table, but that was removed, which is probably how this bug
was introduced.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Message-ID: <20240319110633.230329-1-matthijs@stdin.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In "struct pcs_function", the 'pgnames' and 'npgnames' fields are unused.
This is a left-over from commit 571aec4df5 ("pinctrl: single: Use generic
pinmux helpers for managing functions");
Remove them.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <a6b653642298d35b1e3656e9bfc6d1b322fbbe68.1712004518.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In "struct max77620_pin_info", the 'pull_config' field is unused.
In "struct max77620_pctrl_info", the 'pins_current_opt' field is unused.
Remove them.
On my x86_64 config, with allmodconfig, this shrinks the struct
max77620_pctrl_info from 360 bytes to 296.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <60af8968864ae4a83a76e589b39a2b1e1f65c9db.1711992588.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is a misinterpretation of some of the PIN_CONFIG_* options in this
driver library. PIN_CONFIG_OUTPUT_ENABLE should refer to a buffer or
switch in the output direction of the electrical path. The MediaTek
hardware does not have such a thing. The driver incorrectly maps this
option to the GPIO function's direction.
Likewise, PIN_CONFIG_INPUT_ENABLE should refer to a buffer or switch in
the input direction. The hardware does have such a mechanism, and is
mapped to the IES bit. The driver however sets the direction in addition
to the IES bit, which is incorrect. On readback, the IES bit isn't even
considered.
Ironically, the driver does not support readback for PIN_CONFIG_OUTPUT,
while its readback of PIN_CONFIG_{INPUT,OUTPUT}_ENABLE is what it should
be doing for PIN_CONFIG_OUTPUT.
Rework support for these three options, so that PIN_CONFIG_OUTPUT_ENABLE
is completely removed, PIN_CONFIG_INPUT_ENABLE is only linked to the IES
bit, and PIN_CONFIG_OUTPUT is linked to the GPIO function's direction
and output level.
Fixes: 805250982b ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-3-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the generic pin config library, readback of some options are handled
differently compared to the setting of those options: the argument value
is used to convey enable/disable of an option in the set path, but
success or -EINVAL is used to convey if an option is enabled or disabled
in the debugfs readback path.
PIN_CONFIG_INPUT_SCHMITT_ENABLE is one such option. Fix the readback of
the option in the mediatek-paris library, so that the debugfs dump is
not showing "input schmitt enabled" for pins that don't have it enabled.
Fixes: 1bea6afbc8 ("pinctrl: mediatek: Refine mtk_pinconf_get()")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240327091336.3434141-2-wenst@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20240330210954.100842-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the comment, function prototype, and array of strings indentation
is kinda broken. Reindent that.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-11-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
One header was misplaced and group pinctrl/* ones to show the relation
with the pin control subsystem.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-10-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simplify the error handling in probe function by switching from
dev_err() to dev_err_probe().
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-9-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The irqchip field is allocated, assigned but never used. Remove it.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-8-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the variable is declared as u8, no need to perform ' & U8_MAX'
as it's implied anyway.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-7-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are two different ways on how to get HW IRQ number in some functions.
Unify that by using temporary variable and irqd_to_hwirq() call.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-6-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pin control provides a generic data type and a macro for
the pin function definition, use them in the driver.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-5-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ports are equivalent from the user's point of view. Don't limit
trying them both if writing to one fails.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-4-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pin control subsystem internally uses ENOTSUPP for the not supported
functionality. The checkpatch is false positive about this error code.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-3-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If aw9523_hw_init() fails on ->remove() the mutex left alive.
Destroy it in that case as well. While at it, remove never
true check at the beginning of the function.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-2-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
