The -d command line argument to tdc requires the name of a physical device
on the system where the tests will be run. If -d has not been used, tdc
will skip tests that require a physical device.
This patch is intended to better document what the -d option does and how
it is used.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes updates to mlx5 driver,
1) Simplifications, cleanup and warning prints improvements
2) From Vlad Buslov:
Refactor mlx5 tc flow handling for unlocked execution (Part 1)
Currently, all cls API hardware offloads driver callbacks require caller
to hold rtnl lock when calling them. Cls API has already been updated to
update software filters in parallel (on classifiers that support
unlocked execution), however hardware offloads code still obtains rtnl
lock before calling driver tc callbacks. This set implements partial
support for unlocked execution that is leveraged by follow up
refactorings in specific mlx5 tc subsystems and patch to cls API that
implements API that allows drivers to register their callbacks as
rtnl-unlocked.
In mlx5 tc code mlx5e_tc_flow is the main structure that is used to
represent tc filter. Currently, code the structure itself and its
handlers in both tc and eswitch layers do not implement any kind of
synchronizations and assume external global synchronization provided by
rtnl lock instead. Implement following changes to remove dependency on
rtnl lock in flow handling code that are intended to be used a
groundwork for following changes to provide fully rtnl-independent mlx5
tc:
- Extend struct mlx5e_tc_flow with atomic reference counter and rcu to
allow concurrent access from multiple tc and neigh update workqueue
instances without introducing any additional locks specific to the
structure. Its 'flags' field type is changed to atomic bitmask ops which
is necessary for tc to interact with other concurrent tc instances or
concurrent neigh update that need to skip flows that are not fully
initialized (new INIT_DONE flow flag) and can change the flags
according to neighbor state (flipping OFFLOADED flag).
- Protect unready flows list by new uplink_priv->unready_flows_lock
mutex.
- Convert calls to netdev APIs that require rtnl lock in flow handling
code to their rcu counterparts.
- Modify eswitch code that is called from tc layer and assume implicit
external synchronization to be concurrency safe: change
esw->offloads.num_flows type to atomic integer and re-arrange
esw->state_lock usage to protect additional data.
Some of approaches to synchronizations presented in this patch set are
quite complicated (lockless concurrent usage of data structures with rcu
and reference counting, using fine-grained locking when necessary, retry
mechanisms to handle concurrent insertion of another instance of data
structure with same key, etc.). This is necessary to allow calling the
firmware in parallel in most cases, which is the main motivation of this
change since firmware calls are mach heavier operation than atomic
operations, multitude of locks and potential multiple retries during
concurrent accesses to same elements.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl0/g+oACgkQSD+KveBX
+j7vqAf/TXz9uGKkXR1EHfRMcrWIjQH6M3zKkrwo2K3wTwssi3ymCNfZH+VYkUwk
LMrVnBQxHHPjuhUfmYfXbswVZiGm5Mul0zFNoeWChvcaEbQzsisHXCNNtzQFy9p2
zQUmmvmvNNFQ0KPuwGuK/0rbUmXM3tXqWs2mtBsRLHxZUvqpGh7hETCFvZ0TnBaO
EeFrWV6h8rfynBsRVeDuFGk5hDoo/ASEbWVTsocpPm6UPhIwKyH/Tbv4+wKZgZfr
p/yPKSjwtQw9jPXj/lYxRXBbbZXey+BEptIurmwh3d8MLyrM4VElP6rgaoAb2Wzq
ov5pnEGR5qsAINkOnImBZ4Mw4HN9WQ==
=UKN2
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-07-29
This series includes updates to mlx5 driver,
1) Simplifications, cleanup and warning prints improvements
2) From Vlad Buslov:
Refactor mlx5 tc flow handling for unlocked execution (Part 1)
Currently, all cls API hardware offloads driver callbacks require caller
to hold rtnl lock when calling them. Cls API has already been updated to
update software filters in parallel (on classifiers that support
unlocked execution), however hardware offloads code still obtains rtnl
lock before calling driver tc callbacks. This set implements partial
support for unlocked execution that is leveraged by follow up
refactorings in specific mlx5 tc subsystems and patch to cls API that
implements API that allows drivers to register their callbacks as
rtnl-unlocked.
In mlx5 tc code mlx5e_tc_flow is the main structure that is used to
represent tc filter. Currently, code the structure itself and its
handlers in both tc and eswitch layers do not implement any kind of
synchronizations and assume external global synchronization provided by
rtnl lock instead. Implement following changes to remove dependency on
rtnl lock in flow handling code that are intended to be used a
groundwork for following changes to provide fully rtnl-independent mlx5
tc:
- Extend struct mlx5e_tc_flow with atomic reference counter and rcu to
allow concurrent access from multiple tc and neigh update workqueue
instances without introducing any additional locks specific to the
structure. Its 'flags' field type is changed to atomic bitmask ops which
is necessary for tc to interact with other concurrent tc instances or
concurrent neigh update that need to skip flows that are not fully
initialized (new INIT_DONE flow flag) and can change the flags
according to neighbor state (flipping OFFLOADED flag).
- Protect unready flows list by new uplink_priv->unready_flows_lock
mutex.
- Convert calls to netdev APIs that require rtnl lock in flow handling
code to their rcu counterparts.
- Modify eswitch code that is called from tc layer and assume implicit
external synchronization to be concurrency safe: change
esw->offloads.num_flows type to atomic integer and re-arrange
esw->state_lock usage to protect additional data.
Some of approaches to synchronizations presented in this patch set are
quite complicated (lockless concurrent usage of data structures with rcu
and reference counting, using fine-grained locking when necessary, retry
mechanisms to handle concurrent insertion of another instance of data
structure with same key, etc.). This is necessary to allow calling the
firmware in parallel in most cases, which is the main motivation of this
change since firmware calls are mach heavier operation than atomic
operations, multitude of locks and potential multiple retries during
concurrent accesses to same elements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While do COMPILE_TEST build without CONFIG_NETDEVICES,
we get Kconfig warning:
WARNING: unmet direct dependencies detected for PHYLIB
Depends on [n]: NETDEVICES [=n]
Selected by [y]:
- OCTEON_ETHERNET [=y] && STAGING [=y] && (CAVIUM_OCTEON_SOC && NETDEVICES [=n] || COMPILE_TEST [=y])
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Mark Brown <broonie@kernel.org>
Fixes: 171a9bae68 ("staging/octeon: Allow test build on !MIPS")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* lots more HE (802.11ax) support, particularly things
relevant for the the AP side, but also mesh support
* debugfs cleanups from Greg
* some more work on extended key ID
* start using genl parallel_ops, as preparation for
weaning ourselves off RTNL and getting parallelism
* various other changes all over
-----BEGIN PGP SIGNATURE-----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=eUnh
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2019-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
We have a reasonably large number of changes:
* lots more HE (802.11ax) support, particularly things
relevant for the the AP side, but also mesh support
* debugfs cleanups from Greg
* some more work on extended key ID
* start using genl parallel_ops, as preparation for
weaning ourselves off RTNL and getting parallelism
* various other changes all over
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
mlxsw: Test coverage for DSCP leftover fix
This patch set fixes some global scope pollution issues in the DSCP tests
(in patch #1), and then proceeds (in patch #2) to add a new test for
checking whether, after DSCP prioritization rules are removed from a port,
DSCP rewrites consistently to zero, instead of the last removed rule still
staying in effect.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dedfde2fe1 ("mlxsw: spectrum_dcb: Configure DSCP map as the last
rule is removed") fixed a problem in mlxsw where last DSCP rule to be
removed remained in effect when DSCP rewrite was applied.
Add a selftest that covers this problem.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These two tests have some problems in the global scope pollution and on
contrary, contain unnecessary local declarations. Fix them.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few lines above, we have:
tx_size = BIT(tx->order);
So use 'tx_size' directly to be consistent with the way 'rx->descs_cpu' and
'rx->descs_dma' are computed below.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of HE AP-STA link, ieee80211_send_nullfunc() will not
send the QOS NULL packet to check if AP is still associated.
In this case, probe_send_count will be non-zero and
ieee80211_sta_work() will later disassociate the AP, even
though no packet was ever sent.
Fix this by decrementing probe_send_count and not calling
ieee80211_send_nullfunc() in case of HE link, so that we
still wait for some time for the AP beacon to reappear and
don't disconnect right away.
Signed-off-by: Shay Bar <shay.bar@celeno.com>
Link: https://lore.kernel.org/r/20190703131848.22879-1-shay.bar@celeno.com
[clarify commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Store the OBSS PD parameters inside bss_conf when bringing up an AP and/or
when a station connects to an AP. This allows the driver to configure the
HW accordingly.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190730163701.18836-3-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a strict start type so all new attributes starting from
NL80211_ATTR_HE_OBSS_PD are validated strictly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the data structure, policy and parsing code allowing userland to send
the OBSS PD information into the kernel.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190730163701.18836-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This came up in fuzz testing, and really we don't consider
all-zeroes to be a valid MAC address in most places, so
also reject it here to avoid confusion later on.
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Link: https://lore.kernel.org/r/1563959770-21570-1-git-send-email-periyasa@codeaurora.org
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Over time, we really need to get rid of all of our global locking.
One of the things needed is to use parallel_ops. This isn't really
the most important (RTNL is much more important) but OTOH we just
keep adding uses of genl_family_attrbuf() now. Use .parallel_ops to
disallow this.
Reviewed-By: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190729143109.18683-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The return from ieee80211_get_sband can potentially be a null pointer, so
it seems prudent to add a null check to avoid a null pointer dereference
on sband.
Addresses-Coverity: ("Dereference null return")
Fixes: 2ab4587675 ("mac80211: add support for the ADDBA extension element")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190730143205.14261-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Marek Vasut says:
====================
net: dsa: ksz: Add Microchip KSZ87xx support
This series adds support for Microchip KSZ87xx switches, which are
slightly simpler compared to KSZ9xxx .
====================
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Microchip KSZ8795 DSA driver.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DSA tag code for Microchip KSZ8795 switch. The switch is simpler
and the tag is only 1 byte, instead of 2 as is the case with KSZ9477.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document Microchip KSZ87xx family switches. These include
KSZ8765 - 5 port switch
KSZ8794 - 4 port switch
KSZ8795 - 5 port switch
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock/virtio: optimizations to increase the throughput
This series tries to increase the throughput of virtio-vsock with slight
changes.
While I was testing the v2 of this series I discovered an huge use of memory,
so I added patch 1 to mitigate this issue. I put it in this series in order
to better track the performance trends.
v5:
- rebased all patches on net-next
- added Stefan's R-b and Michael's A-b
v4: https://patchwork.kernel.org/cover/11047717
v3: https://patchwork.kernel.org/cover/10970145
v2: https://patchwork.kernel.org/cover/10938743
v1: https://patchwork.kernel.org/cover/10885431
Below are the benchmarks step by step. I used iperf3 [1] modified with VSOCK
support. As Michael suggested in the v1, I booted host and guest with 'nosmap'.
A brief description of patches:
- Patches 1: limit the memory usage with an extra copy for small packets
- Patches 2+3: reduce the number of credit update messages sent to the
transmitter
- Patches 4+5: allow the host to split packets on multiple buffers and use
VIRTIO_VSOCK_MAX_PKT_BUF_SIZE as the max packet size allowed
host -> guest [Gbps]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.032 0.030 0.048 0.051
64 0.061 0.059 0.108 0.117
128 0.122 0.112 0.227 0.234
256 0.244 0.241 0.418 0.415
512 0.459 0.466 0.847 0.865
1K 0.927 0.919 1.657 1.641
2K 1.884 1.813 3.262 3.269
4K 3.378 3.326 6.044 6.195
8K 5.637 5.676 10.141 11.287
16K 8.250 8.402 15.976 16.736
32K 13.327 13.204 19.013 20.515
64K 21.241 21.341 20.973 21.879
128K 21.851 22.354 21.816 23.203
256K 21.408 21.693 21.846 24.088
512K 21.600 21.899 21.921 24.106
guest -> host [Gbps]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.045 0.046 0.057 0.057
64 0.089 0.091 0.103 0.104
128 0.170 0.179 0.192 0.200
256 0.364 0.351 0.361 0.379
512 0.709 0.699 0.731 0.790
1K 1.399 1.407 1.395 1.427
2K 2.670 2.684 2.745 2.835
4K 5.171 5.199 5.305 5.451
8K 8.442 8.500 10.083 9.941
16K 12.305 12.259 13.519 15.385
32K 11.418 11.150 11.988 24.680
64K 10.778 10.659 11.589 35.273
128K 10.421 10.339 10.939 40.338
256K 10.300 9.719 10.508 36.562
512K 9.833 9.808 10.612 35.979
As Stefan suggested in the v1, I measured also the efficiency in this way:
efficiency = Mbps / (%CPU_Host + %CPU_Guest)
The '%CPU_Guest' is taken inside the VM. I know that it is not the best way,
but it's provided for free from iperf3 and could be an indication.
host -> guest efficiency [Mbps / (%CPU_Host + %CPU_Guest)]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.35 0.45 0.79 1.02
64 0.56 0.80 1.41 1.54
128 1.11 1.52 3.03 3.12
256 2.20 2.16 5.44 5.58
512 4.17 4.18 10.96 11.46
1K 8.30 8.26 20.99 20.89
2K 16.82 16.31 39.76 39.73
4K 30.89 30.79 74.07 75.73
8K 53.74 54.49 124.24 148.91
16K 80.68 83.63 200.21 232.79
32K 132.27 132.52 260.81 357.07
64K 229.82 230.40 300.19 444.18
128K 332.60 329.78 331.51 492.28
256K 331.06 337.22 339.59 511.59
512K 335.58 328.50 331.56 504.56
guest -> host efficiency [Mbps / (%CPU_Host + %CPU_Guest)]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.43 0.43 0.53 0.56
64 0.85 0.86 1.04 1.10
128 1.63 1.71 2.07 2.13
256 3.48 3.35 4.02 4.22
512 6.80 6.67 7.97 8.63
1K 13.32 13.31 15.72 15.94
2K 25.79 25.92 30.84 30.98
4K 50.37 50.48 58.79 59.69
8K 95.90 96.15 107.04 110.33
16K 145.80 145.43 143.97 174.70
32K 147.06 144.74 146.02 282.48
64K 145.25 143.99 141.62 406.40
128K 149.34 146.96 147.49 489.34
256K 156.35 149.81 152.21 536.37
512K 151.65 150.74 151.52 519.93
[1] https://github.com/stefano-garzarella/iperf/
====================
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since now we are able to split packets, we can avoid limiting
their sizes to VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE.
Instead, we can use VIRTIO_VSOCK_MAX_PKT_BUF_SIZE as the max
packet size.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the packets to sent to the guest are bigger than the buffer
available, we can split them, using multiple buffers and fixing
the length in the packet header.
This is safe since virtio-vsock supports only stream sockets.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fwd_cnt and last_fwd_cnt are protected by rx_lock, so we should use
the same spinlock also if we are in the TX path.
Move also buf_alloc under the same lock.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to reduce the number of credit update messages,
we send them only when the space available seen by the
transmitter is less than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since virtio-vsock was introduced, the buffers filled by the host
and pushed to the guest using the vring, are directly queued in
a per-socket list. These buffers are preallocated by the guest
with a fixed size (4 KB).
The maximum amount of memory used by each socket should be
controlled by the credit mechanism.
The default credit available per-socket is 256 KB, but if we use
only 1 byte per packet, the guest can queue up to 262144 of 4 KB
buffers, using up to 1 GB of memory per-socket. In addition, the
guest will continue to fill the vring with new 4 KB free buffers
to avoid starvation of other sockets.
This patch mitigates this issue copying the payload of small
packets (< 128 bytes) into the buffer of last packet queued, in
order to avoid wasting memory.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon says:
====================
Finish conversion of skb_frag_t to bio_vec
The recent conversion of skb_frag_t to bio_vec did not include
skb_frag's page_offset. Add accessor functions for this field,
utilize them, and remove the union, restoring the original structure.
v2:
- rename accessors
- follow kdoc conventions
====================
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that page_offset is referenced through accessors, remove
the union, and use bv_offset.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add skb_frag_off(), skb_frag_off_add(), skb_frag_off_set(),
and skb_frag_off_copy() accessors for page_offset.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
sctp: clean up __sctp_connect function
This patchset is to factor out some common code for
sctp_sendmsg_new_asoc() and __sctp_connect() into 2
new functioins.
v1->v2:
- add the patch 1/5 to avoid a slab-out-of-bounds warning.
- add some code comment for the check change in patch 2/5.
- remove unused 'addrcnt' as Marcelo noticed in patch 3/5.
====================
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this function factored out from sctp_sendmsg_new_asoc() and
__sctp_connect(), it adds a peer with the other addr into the
asoc after this asoc is created with the 1st addr.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this function factored out from sctp_sendmsg_new_asoc() and
__sctp_connect(), it creates the asoc and adds a peer with the
1st addr.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__sctp_connect is doing quit similar things as sctp_sendmsg_new_asoc.
To factor out common functions, this patch is to clean up their code
to make them look more similar:
1. create the asoc and add a peer with the 1st addr.
2. add peers with the other addrs into this asoc one by one.
while at it, also remove the unused 'addrcnt'.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now __sctp_connect() is called by __sctp_setsockopt_connectx() and
sctp_inet_connect(), the latter has done addr_size check with size
of sa_family_t.
In the next patch to clean up __sctp_connect(), we will remove
addr_size check with size of sa_family_t from __sctp_connect()
for the 1st address.
So before doing that, __sctp_setsockopt_connectx() should do
this check first, as sctp_inet_connect() does.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'addr' passed to sctp_transport_init is not always a whole size
of union sctp_addr, like the path:
sctp_sendmsg() ->
sctp_sendmsg_new_asoc() ->
sctp_assoc_add_peer() ->
sctp_transport_new() -> sctp_transport_init()
In the next patches, we will also pass the address length of data
only to sctp_assoc_add_peer().
So sctp_transport_init() should copy the only available data from
addr to peer->ipaddr, instead of 'peer->ipaddr = *addr' which may
cause slab-out-of-bounds.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxkad sometimes triggers a warning about oversized stack frames when
building with clang for a 32-bit architecture:
net/rxrpc/rxkad.c:243:12: error: stack frame size of 1088 bytes in function 'rxkad_secure_packet' [-Werror,-Wframe-larger-than=]
net/rxrpc/rxkad.c:501:12: error: stack frame size of 1088 bytes in function 'rxkad_verify_packet' [-Werror,-Wframe-larger-than=]
The problem is the combination of SYNC_SKCIPHER_REQUEST_ON_STACK() in
rxkad_verify_packet()/rxkad_secure_packet() with the relatively large
scatterlist in rxkad_verify_packet_1()/rxkad_secure_packet_encrypt().
The warning does not show up when using gcc, which does not inline the
functions as aggressively, but the problem is still the same.
Allocate the cipher buffers from the slab instead, caching the allocated
packet crypto request memory used for DATA packet crypto in the rxrpc_call
struct.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC flow table is created when first flow is added, and destroyed when last
flow is removed. This assumes that all accesses to the table are externally
synchronized with rtnl lock. To remove dependency on rtnl lock, add new
mutex mlx5e_tc_table->t_lock and use it to protect the flow table.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Function netdev_master_upper_dev_get() generates warning if caller doesn't
hold rtnl lock. Modify rules update path to use rcu version of that
function.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
esw->state_lock is already used to protect vlan vport configuration change.
However, all preparation and correctness checks, and code that sets vport
data are not protected by this lock and assume external synchronization by
rtnl lock. In order to remove dependency on rtnl lock, extend
esw->state_lock protection to whole eswitch vlan add/del functions.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eswitch implements its own locking by means of state_lock mutex and
multiple fine-grained lock in containing data structures, and is supposed
to not rely on rtnl lock. However, eswitch offloads num_flows type is a
regular long long integer and cannot be modified concurrently. This is an
implicit assumptions that mlx5 tc is serialized (by rtnl lock or any other
means). In order to remove implicit dependency on rtnl lock, change
num_flows type to atomic64 to allow concurrent modifications.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to remove dependency on rtnl lock for protecting unready_flows
list when reoffloading unready flows on workqueue, extend representor
uplink private structure with dedicated 'unready_flows_lock' mutex. Take
the lock in all users of unready_flows list before accessing it. Implement
helper functions to add and delete unready flow.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to remove dependency on rtnl lock, access to tc flows hashtable
must be explicitly protected from concurrent flows removal.
Extend tc flow structure with rcu to allow concurrent parallel access. Use
rcu read lock to safely lookup flow in tc flows hash table, and take
reference to it. Use rcu free for flow deletion to accommodate concurrent
stats requests.
Add new DELETED flow flag. Imlement new flow_flag_test_and_set() helper
that is used to set a flag and return its previous value. Use it to
atomically set the flag in mlx5e_delete_flower() to guarantee that flow can
only be deleted once, even when same flow is deleted concurrently by
multiple tasks.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
To remove dependency on rtnl lock and allow concurrent modification of
'flags' field of tc flow structure, change flow flag type to unsigned long
and use atomic bit ops for reading and changing the flags. Implement
auxiliary functions for setting, resetting and getting specific flag, and
for checking most often used flag values.
Always set flags with smp_mb__before_atomic() to ensure that all
mlx5e_tc_flow are updated before concurrent readers can read new flags
value. Rearrange all code paths to actually set flow->rule[] pointers
before setting the OFFLOADED flag. On read side, use smp_mb__after_atomic()
when accessing flags to ensure that offload-related flow fields are only
read after the flags.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
With new classifier type that doesn't require rtnl lock, following
invariant holds:
- Filter with specified cookie created only once.
- Filter with specified cookie deleted only once.
- Stats updates can be performed in parallel to each other.
Extend tc flow with rcu and reference counter. To protect from concurrent
delete, get reference to tc flow when:
- Reading flow stats.
- Accessing flow in neigh update handler.
- Accessing flow in neigh update used value handler.
Only free flow when reference counter reached zero. Modify flow cleanup to
account for flows that could be not fully initialized by checking if flow
is actually in the list of corresponding mod_hdr, hairpin and encap
entries. Don't cleanup flow directly in case of error to allow concurrent
neigh update (neigh update will be modified to always take reference to
flow when using it).
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The helper function has "if" branches that do the same. Merge them to
simplify the code.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When call flow_block_cb_is_busy. The indr_priv is guaranteed to
NULL ptr. So there is no need to call flow_bock_cb_is_busy.
Fixes: 0d4fd02e71 ("net: flow_offload: add flow_block_cb_is_busy() and use it")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Don't choose who implements the rxnfc "get/set" callbacks according to
CONFIG_MLX5_EN_RXNFC, instead have the callbacks always available and
delegate to a function of a different driver module when needed
(en_fs_ethtool.c), have stubs in en/fs.h to fallback to when
en_fs_ethtool.c is compiled out, to avoid complications and ifdefs in
en_main.c.
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Lucas Bates