Experience has shown that 1ms is sometimes not enough, even when the GPU
is running at its maximum frequency, not to mention that an MMU operation
might take longer if the GPU is running at a lower frequency, which is
likely to be the case if devfreq is active.
Let's pick a significantly bigger timeout value (1ms -> 100ms) to be on
the safe side.
v5:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-17-boris.brezillon@collabora.com
The hardware has a set of '_NEXT' registers that can hold a second job
while the first is executing. Make use of these registers to enqueue a
second job per slot.
v5:
* Fix a comment in panfrost_job_init()
v3:
* Fix the done/err job dequeuing logic to get a valid active state
* Only enable the second slot on GPUs supporting jobchain disambiguation
* Split interrupt handling in sub-functions
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-16-boris.brezillon@collabora.com
If the process who submitted these jobs decided to close the FD before
the jobs are done it probably means it doesn't care about the result.
v5:
* Add a panfrost_exception_is_fault() helper and the
DRM_PANFROST_EXCEPTION_MAX_NON_FAULT value
v4:
* Don't disable/restore irqs when taking the job_lock (not needed since
this lock is never taken from an interrupt context)
v3:
* Set fence error to ECANCELED when a TERMINATED exception is received
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-15-boris.brezillon@collabora.com
If we can recover from a fault without a reset there's no reason to
issue one.
v3:
* Drop the mention of Valhall requiring a reset on JOB_BUS_FAULT
* Set the fence error to -EINVAL instead of having per-exception
error codes
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-14-boris.brezillon@collabora.com
This is not yet needed because we let active jobs be killed during by
the reset and we don't really bother making sure they can be restarted.
But once we start adding soft-stop support, controlling when we deal
with the remaining interrrupts and making sure those are handled before
the reset is issued gets tricky if we keep job interrupts active.
Let's prepare for that and mask+flush job IRQs before issuing a reset.
v4:
* Add a comment explaining why we WARN_ON(!job) in the irq handler
* Keep taking the job_lock when evicting stalled jobs
v3:
* New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-11-boris.brezillon@collabora.com
Now that we can pass our own workqueue to drm_sched_init(), we can use
an ordered workqueue on for both the scheduler timeout tdr and our own
reset work (which we use when the reset is not caused by a fault/timeout
on a specific job, like when we have AS_ACTIVE bit stuck). This
guarantees that the timeout handlers and reset handler can't run
concurrently which drastically simplifies the locking.
v5:
* Don't call cancel_delayed_timeout() in the reset path (those works
are canceled in drm_sched_stop())
v4:
* Actually pass the reset workqueue to drm_sched_init()
* Don't call cancel_work_sync() in panfrost_reset(). It will deadlock
since it might be called from the reset work, which is executing and
cancel_work_sync() will wait for the handler to return. Checking the
reset pending status should avoid spurious resets
v3:
* New patch
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-10-boris.brezillon@collabora.com
This should avoid switching to interrupt context when the GPU is under
heavy use.
v3:
* Don't take the job_lock in panfrost_job_handle_irq()
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-9-boris.brezillon@collabora.com
Do the exception -> string translation using a table. This way we get
rid of those magic numbers and can easily add new fields if we need
to attach extra information to exception types.
v4:
* Don't expose exception type to userspace
* Merge the enum definition and the enum -> string table declaration
in the same patch
v3:
* Drop the error field
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-7-boris.brezillon@collabora.com
If the fence creation fail, we can return the error pointer directly.
The core will update the fence error accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-4-boris.brezillon@collabora.com
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU
reset. This leads to extra complexity when we need to synchronize timeout
works with the reset work. One solution to address that is to have an
ordered workqueue at the driver level that will be used by the different
schedulers to queue their timeout work. Thanks to the serialization
provided by the ordered workqueue we are guaranteed that timeout
handlers are executed sequentially, and can thus easily reset the GPU
from the timeout handler without extra synchronization.
v5:
* Add a new paragraph to the timedout_job() method
v3:
* New patch
v4:
* Actually use the timeout_wq to queue the timeout work
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
The documentation is a bit vague and doesn't really describe what the
->timedout_job() is expected to do. Let's add a few more details.
v5:
* New patch
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-2-boris.brezillon@collabora.com
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:radeon_ttm_bo_destroy+0x2c/0x100 [radeon]
Call Trace:
radeon_bo_unref+0x1a/0x30 [radeon]
radeon_gem_object_free+0x33/0x50 [radeon]
drm_gem_object_release_handle+0x69/0x70 [drm]
drm_gem_handle_delete+0x62/0xa0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
drm_ioctl_kernel+0xb2/0xf0 [drm]
drm_ioctl+0x30a/0x3c0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
radeon_drm_ioctl+0x49/0x80 [radeon]
__x64_sys_ioctl+0x8e/0xd0
Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in zte.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-28-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in xlnx.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-27-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vmxgfx. All usage of
the field within vmwgfx can safely be removed.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-26-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vkms.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-25-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vc4.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-24-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't use it in tidss.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-23-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in tegra.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-22-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in sun4i.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-21-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in stm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-20-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in sti.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-19-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in rockchip.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-18-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct omap_drm_device.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-16-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in nouveau.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-15-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in mediatek.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-14-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in dcss.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-13-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in imx.
v3:
* move dcss changes into separate patch (Laurentiu)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-12-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in kirin.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-11-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in exynos.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-10-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in malidp.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-9-tzimmermann@suse.de
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in komeda.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-8-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct drm_i915_private.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-7-tzimmermann@suse.de
For KMS drivers, replace the IRQ check in VBLANK ioctls with a check for
vblank support. IRQs might be enabled wthout vblanking being supported.
This change also removes the DRM framework's only dependency on IRQ state
for non-legacy drivers. For legacy drivers with userspace modesetting,
the original test remains in drm_wait_vblank_ioctl().
v4:
* avoid preprocessor ifdef in drm_wait_vblank_ioctl()
(Jani, Thierry)
v3:
* optimize test in drm_wait_vblank_ioctl() for KMS case (Liviu)
* update docs for drm_irq_uninstall()
v2:
* keep the old test for legacy drivers in
drm_wait_vblank_ioctl() (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-5-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct radeon_device.irq.installed. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-4-tzimmermann@suse.de
Remove the check around drm_irq_uninstall(). The same test is
done by the function internally. The tested state in irq_enabled
is considered obsolete and should not be used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-3-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct amdgpu_device.irq.installed. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-2-tzimmermann@suse.de
The panfrost driver tries to kill in-flight jobs on FD close after
destroying the FD scheduler entities. For this to work properly, we
need to make sure the jobs popped from the scheduler entities have
been queued at the HW level before declaring the entity idle, otherwise
we might iterate over a list that doesn't contain those jobs.
Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624140850.2229697-1-boris.brezillon@collabora.com
Goes through all the drivers and deletes the default hook since it's
the default now.
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Emma Anholt <emma@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-14-daniel.vetter@ffwll.ch
It's tedious to review this all the time, and my audit showed that
arcpgu actually forgot to set this.
Make this the default and stop worrying.
Again I sprinkled WARN_ON_ONCE on top to make sure we don't have
strange combinations of hooks: cleanup_fb without prepare_fb doesn't
make sense, and since simpler drivers are all new they better be GEM
based drivers.
v2: Warn and bail when it's _not_ a GEM driver (Noralf)
v3: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210623162456.3373469-1-daniel.vetter@ffwll.ch
I guess no one ever tried running omap together with lima or panfrost,
not even sure that's possible. Anyway for consistency, fix this.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomba@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-12-daniel.vetter@ffwll.ch
Like we have for the shadow helpers too, and roll it out to drivers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-11-daniel.vetter@ffwll.ch
All they do is refcount the fb, which the atomic helpers already do.
This is was necessary with the legacy helpers and I guess just carry
over in the conversion. drm_plane_state always has a full reference
for its ->fb pointer during its entire lifetime,
see __drm_atomic_helper_plane_destroy_state()
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-10-daniel.vetter@ffwll.ch
