The driver could possibly sleep while in atomic context resulting
in the following call trace while CONFIG_DEBUG_ATOMIC_SLEEP=y is
set:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2817, name: bash
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
__might_resched+0x123/0x170
mutex_lock+0x1e/0x50
pds_vfio_put_lm_file+0x1e/0xa0 [pds_vfio_pci]
pds_vfio_put_save_file+0x19/0x30 [pds_vfio_pci]
pds_vfio_state_mutex_unlock+0x2e/0x80 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This can happen if pds_vfio_put_restore_file() and/or
pds_vfio_put_save_file() grab the mutex_lock(&lm_file->lock)
while the spin_lock(&pds_vfio->reset_lock) is held, which can
happen during while calling pds_vfio_state_mutex_unlock().
Fix this by changing the reset_lock to reset_mutex so there are no such
conerns. Also, make sure to destroy the reset_mutex in the driver specific
VFIO device release function.
This also fixes a spinlock bad magic BUG that was caused
by not calling spinlock_init() on the reset_lock. Since, the lock is
being changed to a mutex, make sure to call mutex_init() on it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/kvm/1f9bc27b-3de9-4891-9687-ba2820c1b390@moroto.mountain/
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The following BUG was found when running on a kernel with
CONFIG_DEBUG_MUTEXES=y set:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
RIP: 0010:mutex_trylock+0x10d/0x120
Call Trace:
<TASK>
? __warn+0x85/0x140
? mutex_trylock+0x10d/0x120
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? mutex_trylock+0x10d/0x120
? mutex_trylock+0x10d/0x120
pds_vfio_reset+0x3a/0x60 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
As shown, lock->magic != lock. This is because
mutex_init(&pds_vfio->state_mutex) is called in the VFIO open path. So,
if a reset is initiated before the VFIO device is opened the mutex will
have never been initialized. Fix this by calling
mutex_init(&pds_vfio->state_mutex) in the VFIO init path.
Also, don't destroy the mutex on close because the device may
be re-opened, which would cause mutex to be uninitialized. Fix this by
implementing a driver specific vfio_device_ops.release callback that
destroys the mutex before calling vfio_pci_core_release_dev().
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231122192532.25791-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This branch has three new iommufd capabilities:
- Dirty tracking for DMA. AMD/ARM/Intel CPUs can now record if a DMA
writes to a page in the IOPTEs within the IO page table. This can be used
to generate a record of what memory is being dirtied by DMA activities
during a VM migration process. A VMM like qemu will combine the IOMMU
dirty bits with the CPU's dirty log to determine what memory to
transfer.
VFIO already has a DMA dirty tracking framework that requires PCI
devices to implement tracking HW internally. The iommufd version
provides an alternative that the VMM can select, if available. The two
are designed to have very similar APIs.
- Userspace controlled attributes for hardware page
tables (HWPT/iommu_domain). There are currently a few generic attributes
for HWPTs (support dirty tracking, and parent of a nest). This is an
entry point for the userspace iommu driver to control the HW in detail.
- Nested translation support for HWPTs. This is a 2D translation scheme
similar to the CPU where a DMA goes through a first stage to determine
an intermediate address which is then translated trough a second stage
to a physical address.
Like for CPU translation the first stage table would exist in VM
controlled memory and the second stage is in the kernel and matches the
VM's guest to physical map.
As every IOMMU has a unique set of parameter to describe the S1 IO page
table and its associated parameters the userspace IOMMU driver has to
marshal the information into the correct format.
This is 1/3 of the feature, it allows creating the nested translation
and binding it to VFIO devices, however the API to support IOTLB and
ATC invalidation of the stage 1 io page table, and forwarding of IO
faults are still in progress.
The series includes AMD and Intel support for dirty tracking. Intel
support for nested translation.
Along the way are a number of internal items:
- New iommu core items: ops->domain_alloc_user(), ops->set_dirty_tracking,
ops->read_and_clear_dirty(), IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user
- UAF fix in iopt_area_split()
- Spelling fixes and some test suite improvement
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZUDu2wAKCRCFwuHvBreF
YcdeAQDaBmjyGLrRIlzPyohF6FrombyWo2512n51Hs8IHR4IvQEA3oRNgQ2tsJRr
1UPuOqnOD5T/oVX6AkUPRBwanCUQwwM=
=nyJ3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This brings three new iommufd capabilities:
- Dirty tracking for DMA.
AMD/ARM/Intel CPUs can now record if a DMA writes to a page in the
IOPTEs within the IO page table. This can be used to generate a
record of what memory is being dirtied by DMA activities during a
VM migration process. A VMM like qemu will combine the IOMMU dirty
bits with the CPU's dirty log to determine what memory to transfer.
VFIO already has a DMA dirty tracking framework that requires PCI
devices to implement tracking HW internally. The iommufd version
provides an alternative that the VMM can select, if available. The
two are designed to have very similar APIs.
- Userspace controlled attributes for hardware page tables
(HWPT/iommu_domain). There are currently a few generic attributes
for HWPTs (support dirty tracking, and parent of a nest). This is
an entry point for the userspace iommu driver to control the HW in
detail.
- Nested translation support for HWPTs. This is a 2D translation
scheme similar to the CPU where a DMA goes through a first stage to
determine an intermediate address which is then translated trough a
second stage to a physical address.
Like for CPU translation the first stage table would exist in VM
controlled memory and the second stage is in the kernel and matches
the VM's guest to physical map.
As every IOMMU has a unique set of parameter to describe the S1 IO
page table and its associated parameters the userspace IOMMU driver
has to marshal the information into the correct format.
This is 1/3 of the feature, it allows creating the nested
translation and binding it to VFIO devices, however the API to
support IOTLB and ATC invalidation of the stage 1 io page table,
and forwarding of IO faults are still in progress.
The series includes AMD and Intel support for dirty tracking. Intel
support for nested translation.
Along the way are a number of internal items:
- New iommu core items: ops->domain_alloc_user(),
ops->set_dirty_tracking, ops->read_and_clear_dirty(),
IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user
- UAF fix in iopt_area_split()
- Spelling fixes and some test suite improvement"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (52 commits)
iommufd: Organize the mock domain alloc functions closer to Joerg's tree
iommufd/selftest: Fix page-size check in iommufd_test_dirty()
iommufd: Add iopt_area_alloc()
iommufd: Fix missing update of domains_itree after splitting iopt_area
iommu/vt-d: Disallow read-only mappings to nest parent domain
iommu/vt-d: Add nested domain allocation
iommu/vt-d: Set the nested domain to a device
iommu/vt-d: Make domain attach helpers to be extern
iommu/vt-d: Add helper to setup pasid nested translation
iommu/vt-d: Add helper for nested domain allocation
iommu/vt-d: Extend dmar_domain to support nested domain
iommufd: Add data structure for Intel VT-d stage-1 domain allocation
iommu/vt-d: Enhance capability check for nested parent domain allocation
iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC with nested HWPTs
iommufd/selftest: Add nested domain allocation for mock domain
iommu: Add iommu_copy_struct_from_user helper
iommufd: Add a nested HW pagetable object
iommu: Pass in parent domain with user_data to domain_alloc_user op
iommufd: Share iommufd_hwpt_alloc with IOMMUFD_OBJ_HWPT_NESTED
iommufd: Derive iommufd_hwpt_paging from iommufd_hw_pagetable
...
Have the IOVA bitmap exported symbols adhere to the IOMMUFD symbol
export convention i.e. using the IOMMUFD namespace. In doing so,
import the namespace in the current users. This means VFIO and the
vfio-pci drivers that use iova_bitmap_set().
Link: https://lore.kernel.org/r/20231024135109.73787-4-joao.m.martins@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking
the user bitmaps, so move to the common dependency into IOMMUFD. In doing
so, create the symbol IOMMUFD_DRIVER which designates the builtin code that
will be used by drivers when selected. Today this means MLX5_VFIO_PCI and
PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when
supporting dirty tracking and select IOMMUFD_DRIVER accordingly.
Given that the symbol maybe be disabled, add header definitions in
iova_bitmap.h for when IOMMUFD_DRIVER=n
Link: https://lore.kernel.org/r/20231024135109.73787-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that all pieces are in place, activate the chunk mode functionality
based on device capabilities.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for READING in chunk mode.
In case the last SAVE command recognized that there was still some image
to be read, however, there was no available chunk to use for, this task
was delayed for the reader till one chunk will be consumed and becomes
available.
In the above case, a work will be executed to read in the background the
next image from the device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add support for SAVING in chunk mode, it includes running a work
that will fill the next chunk from the device.
In case the number of available chunks will reach the MAX_NUM_CHUNKS,
the next chunk SAVING will be delayed till the reader will consume one
chunk.
The next patch from the series will add the reader part of the chunk
mode.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch is another preparation step towards working in chunk mode.
It pre-allocates chunks for the STOP_COPY phase to let the driver use
them immediately and prevent an extra allocation upon that phase.
Before that patch we had a single large buffer that was dedicated for
the STOP_COPY phase as there was a single SAVE in the source for the
last image.
Once we'll move to chunk mode the idea is to have some small buffers
that will be used upon the STOP_COPY phase.
The driver will read-ahead from the firmware the full state in
small/optimized chunks while letting QEMU/user space read in parallel
the available data.
Each buffer holds its chunk number to let it be recognized down the road
in the coming patches.
The chunk buffer size is picked-up based on the minimum size that
firmware requires, the total full size and some max value in the driver
code which was set to 8MB to achieve some optimized downtime in the
general case.
As the chunk mode is applicable even if we move directly to STOP_COPY
the buffers preparation and some other related stuff is done
unconditionally with regards to STOP/PRE-COPY.
Note:
In that phase in the series we still didn't activate the chunk mode and
the first buffer will be used in all the places.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Upon chunk mode there may be multiple images that will be read from the
device upon STOP_COPY.
This patch is some preparation for that mode by replacing the relevant
stuff to a better matching name.
As part of that, be stricter to recognize PRE_COPY error only when it
didn't occur on a STOP_COPY chunk.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Once the device supports 'chunk mode' the driver can support state size
which is larger than 4GB.
In that case the device has the capability to split a single image to
multiple chunks as long as the software provides a buffer in the minimum
size reported by the device.
The driver should query for the minimum buffer size required using
QUERY_VHCA_MIGRATION_STATE command with the 'chunk' bit set in its
input, in that case, the output will include both the minimum buffer
size (i.e. required_umem_size) and also the remaining total size to be
reported/used where that it will be applicable.
At that point in the series the 'chunk' bit is off, the last patch will
activate the feature once all pieces will be ready.
Note:
Before this change we were limited to 4GB state size as of 4 bytes max
value based on the device specification for the query/save/load
commands.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Upon a successful SAVE callback there is no need to activate a work, all
the required stuff can be done directly.
As so, refactor the above flow to activate a work only upon an error.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Post of disabling the SAVING migration file, which includes setting the
file state to be MLX5_MIGF_STATE_ERROR, call to wake_up_interruptible()
on its poll_wait member.
This lets any potential reader which is waiting already for data as part
of mlx5vf_save_read() to wake up, recognize the error state and return
with an error.
Post of that we don't need to rely on any other condition to wake up
the reader as of the returning of the SAVE command that was previously
executed, etc.
In addition, this change will simplify error flows (e.g health recovery)
once we'll move to chunk mode and multiple SAVE commands may run in the
STOP_COPY phase as we won't need to rely any more on a SAVE command to
wake-up a potential waiting reader.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230911093856.81910-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The pci_physfn() helper exists to support cases where the physfn
field may not be compiled into the pci_dev structure. We've
declared this driver dependent on PCI_IOV to avoid this problem,
but regardless we should follow the precedent not to access this
field directly.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230914021332.1929155-1-oushixiong@kylinos.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If PCI_ATS isn't set, then pdev->physfn is not defined.
it causes a compilation issue:
../drivers/vfio/pci/pds/vfio_dev.c:165:30: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’?
165 | __func__, pci_dev_id(pdev->physfn), pci_id, vf_id,
| ^~~~~~
So adding PCI_IOV depends to select PCI_ATS.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230906014942.1658769-1-oushixiong@kylinos.cn
Fixes: 63f77a7161 ("vfio/pds: register with the pds_core PF")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----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=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
Commit bb500dbe2a ("vfio/pds: Add VFIO live migration support")
added live migration support for the pds-vfio-pci driver. When
sending the SUSPEND command to the device, the driver sets the
type of suspend (i.e. P2P or FULL). However, the driver isn't
sending the type of suspend for the SUSPEND_STATUS command, which
will result in failures. Fix this by also sending the suspend type
in the SUSPEND_STATUS command.
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821184215.34564-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
anon_inode_getfile() never returns NULL pointer, it will return
ERR_PTR() when it fails, so replace the check with IS_ERR().
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20230819023716.3469037-1-yangyingliang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The VFIO_DEVICE_GET_INFO, VFIO_DEVICE_GET_REGION_INFO, and
VFIO_IOMMU_GET_INFO ioctls fill in an info struct followed by capability
structs:
+------+---------+---------+-----+
| info | caps[0] | caps[1] | ... |
+------+---------+---------+-----+
Both the info and capability struct sizes are not always multiples of
sizeof(u64), leaving u64 fields in later capability structs misaligned.
Userspace applications currently need to handle misalignment manually in
order to support CPU architectures and programming languages with strict
alignment requirements.
Make life easier for userspace by ensuring alignment in the kernel. This
is done by padding info struct definitions and by copying out zeroes
after capability structs that are not aligned.
The new layout is as follows:
+------+---------+---+---------+-----+
| info | caps[0] | 0 | caps[1] | ... |
+------+---------+---+---------+-----+
In this example caps[0] has a size that is not multiples of sizeof(u64),
so zero padding is added to align the subsequent structure.
Adding zero padding between structs does not break the uapi. The memory
layout is specified by the info.cap_offset and caps[i].next fields
filled in by the kernel. Applications use these field values to locate
structs and are therefore unaffected by the addition of zero padding.
Note that code that copies out info structs with padding is updated to
always zero the struct and copy out as many bytes as userspace
requested. This makes the code shorter and avoids potential information
leaks by ensuring padding is initialized.
Originally-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230809203144.2880050-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add Kconfig entries and pds-vfio-pci.rst. Also, add an entry in the
MAINTAINERS file for this new driver.
It's not clear where documentation for vendor specific VFIO
drivers should live, so just re-use the current amd
ethernet location.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-9-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It's possible that the device firmware crashes and is able to recover
due to some configuration and/or other issue. If a live migration
is in progress while the firmware crashes, the live migration will
fail. However, the VF PCI device should still be functional post
crash recovery and subsequent migrations should go through as
expected.
When the pds_core device notices that firmware crashes it sends an
event to all its client drivers. When the pds_vfio driver receives
this event while migration is in progress it will request a deferred
reset on the next migration state transition. This state transition
will report failure as well as any subsequent state transition
requests from the VMM/VFIO. Based on uapi/vfio.h the only way out of
VFIO_DEVICE_STATE_ERROR is by issuing VFIO_DEVICE_RESET. Once this
reset is done, the migration state will be reset to
VFIO_DEVICE_STATE_RUNNING and migration can be performed.
If the event is received while no migration is in progress (i.e.
the VM is in normal operating mode), then no actions are taken
and the migration state remains VFIO_DEVICE_STATE_RUNNING.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-8-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The pds_core driver will supply adminq services, so find the PF
and register with the DSC services.
Use the following commands to enable a VF:
echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-5-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is the initial framework for the new pds-vfio-pci device driver.
This does the very basics of registering the PDS PCI device and
configuring it as a VFIO PCI device.
With this change, the VF device can be bound to the pds-vfio-pci driver
on the host and presented to the VM as an ethernet VF.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently only Mellanox uses the combine_ranges function. The
new pds_vfio driver also needs this function. So, move it to
a common location for other vendor drivers to use.
Also, fix RCT ordering while moving/renaming the function.
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This is the way user to invoke hot-reset for the devices opened by cdev
interface. User should check the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED
in the output of VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl before doing
hot-reset for cdev devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-11-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This copies the vfio_pci_dependent_device to userspace during looping each
affected device for reporting vfio_pci_hot_reset_info. This avoids counting
the affected devices and allocating a potential large buffer to store the
vfio_pci_dependent_device of all the affected devices before copying them
to userspace.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718105542.4138-10-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This allows VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl use the iommufd_ctx
of the cdev device to check the ownership of the other affected devices.
When VFIO_DEVICE_GET_PCI_HOT_RESET_INFO is called on an IOMMUFD managed
device, the new flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is reported to indicate
the values returned are IOMMUFD devids rather than group IDs as used when
accessing vfio devices through the conventional vfio group interface.
Additionally the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED will be reported
in this mode if all of the devices affected by the hot-reset are owned by
either virtue of being directly bound to the same iommufd context as the
calling device, or implicitly owned via a shared IOMMU group.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-9-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are drivers that need to search vfio_device within a given dev_set.
e.g. vfio-pci. So add a helper.
vfio_pci_is_device_in_set() now returns -EBUSY in commit a882c16a2b
("vfio/pci: Change vfio_pci_try_bus_reset() to use the dev_set") where
it was trying to preserve the return of vfio_pci_try_zap_and_vma_lock_cb().
However, it makes more sense to return -ENODEV.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-8-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares to add another method for hot reset. The major hot reset logic
are moved to vfio_pci_ioctl_pci_hot_reset_groups().
No functional change is intended.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This suits more on what the code does.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-2-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It should be possible to select vfio-pci variant drivers without building
vfio-pci itself, which implies each variant driver should select
vfio-pci-core.
Fix the top level vfio Makefile to traverse pci based on vfio-pci-core
rather than vfio-pci.
Mark MMAP and INTX options depending on vfio-pci-core to cleanup resulting
config if core is not enabled.
Push all PCI related vfio options to a sub-menu and make descriptions
consistent.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230614193948.477036-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Test and enable PCIe AtomicOp completer support of various widths and
report via device-info capability to userspace.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Robin Voetter <robin@streamhpc.com>
Tested-by: Robin Voetter <robin@streamhpc.com>
Link: https://lore.kernel.org/r/20230519214748.402003-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Apply the same logic as commit 912b625b4d ("vfio/pci: demote hiding
ecap messages to debug level") for the less common case of hiding
standard capabilities.
Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230523225250.1215911-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Dynamic MSI-X is supported. Clear VFIO_IRQ_INFO_NORESIZE
to provide guidance to user space.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/fd1ef2bf6ae972da8e2805bc95d5155af5a8fb0a.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
pci_msix_alloc_irq_at() enables an individual MSI-X interrupt to be
allocated after MSI-X enabling.
Use dynamic MSI-X (if supported by the device) to allocate an interrupt
after MSI-X is enabled. An MSI-X interrupt is dynamically allocated at
the time a valid eventfd is assigned. This is different behavior from
a range provided during MSI-X enabling where interrupts are allocated
for the entire range whether a valid eventfd is provided for each
interrupt or not.
The PCI-MSIX API requires that some number of irqs are allocated for
an initial set of vectors when enabling MSI-X on the device. When
dynamic MSIX allocation is not supported, the vector table, and thus
the allocated irq set can only be resized by disabling and re-enabling
MSI-X with a different range. In that case the irq allocation is
essentially a cache for configuring vectors within the previously
allocated vector range. When dynamic MSI-X allocation is supported,
the API still requires some initial set of irqs to be allocated, but
also supports allocating and freeing specific irq vectors both
within and beyond the initially allocated range.
For consistency between modes, as well as to reduce latency and improve
reliability of allocations, and also simplicity, this implementation
only releases irqs via pci_free_irq_vectors() when either the interrupt
mode changes or the device is released.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230403211841.0e206b67.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/956c47057ae9fd45591feaa82e9ae20929889249.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Not all MSI-X devices support dynamic MSI-X allocation. Whether
a device supports dynamic MSI-X should be queried using
pci_msix_can_alloc_dyn().
Instead of scattering code with pci_msix_can_alloc_dyn(),
probe this ability once and store it as a property of the
virtual device.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/f1ae022c060ecb7e527f4f53c8ccafe80768da47.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation for surrounding code change it is helpful to
ensure that existing comments are accurate.
Remove inaccurate comment about direct access and update
the rest of the comment to reflect the purpose of writing
the cached MSI message to the device.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/lkml/20230330164050.0069e2a5.alex.williamson@redhat.com/
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5b605ce7dcdab5a5dfef19cec4d73ae2fdad3ae1.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
struct vfio_pci_core_device::num_ctx counts how many interrupt
contexts have been allocated. When all interrupt contexts are
allocated simultaneously num_ctx provides the upper bound of all
vectors that can be used as indices into the interrupt context
array.
With the upcoming support for dynamic MSI-X the number of
interrupt contexts does not necessarily span the range of allocated
interrupts. Consequently, num_ctx is no longer a trusted upper bound
for valid indices.
Stop using num_ctx to determine if a provided vector is valid. Use
the existence of allocated interrupt.
This changes behavior on the error path when user space provides
an invalid vector range. Behavior changes from early exit without
any modifications to possible modifications to valid vectors within
the invalid range. This is acceptable considering that an invalid
range is not a valid scenario, see link to discussion.
The checks that ensure that user space provides a range of vectors
that is valid for the device are untouched.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230316155646.07ae266f.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/e27d350f02a65b8cbacd409b4321f5ce35b3186d.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Interrupt context is statically allocated at the time interrupts
are allocated. Following allocation, the context is managed by
directly accessing the elements of the array using the vector
as index. The storage is released when interrupts are disabled.
It is possible to dynamically allocate a single MSI-X interrupt
after MSI-X is enabled. A dynamic storage for interrupt context
is needed to support this. Replace the interrupt context array with an
xarray (similar to what the core uses as store for MSI descriptors)
that can support the dynamic expansion while maintaining the
custom that uses the vector as index.
With a dynamic storage it is no longer required to pre-allocate
interrupt contexts at the time the interrupts are allocated.
MSI and MSI-X interrupt contexts are only used when interrupts are
enabled. Their allocation can thus be delayed until interrupt enabling.
Only enabled interrupts will have associated interrupt contexts.
Whether an interrupt has been allocated (a Linux irq number exists
for it) becomes the criteria for whether an interrupt can be enabled.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/lkml/20230404122444.59e36a99.alex.williamson@redhat.com/
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/40e235f38d427aff79ae35eda0ced42502aa0937.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Enabling and disabling of an interrupt involves several steps
that can fail. Cleanup after failure is done when the error
is encountered, resulting in some repetitive code.
Support for dynamic contexts will introduce more steps during
interrupt enabling and disabling.
Transition to centralized exit path in preparation for dynamic
contexts to eliminate duplicate error handling code.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/72dddae8aa710ce522a74130120733af61cffe4d.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Interrupt context storage is statically allocated at the time
interrupts are allocated. Following allocation, the interrupt
context is managed by directly accessing the elements of the
array using the vector as index.
It is possible to allocate additional MSI-X vectors after
MSI-X has been enabled. Dynamic storage of interrupt context
is needed to support adding new MSI-X vectors after initial
allocation.
Replace direct access of array elements with pointers to the
array elements. Doing so reduces impact of moving to a new data
structure. Move interactions with the array to helpers to
mostly contain changes needed to transition to a dynamic
data structure.
No functional change intended.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/eab289693c8325ede9aba99380f8b8d5143980a4.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
User space provides the vector as an unsigned int that is checked
early for validity (vfio_set_irqs_validate_and_prepare()).
A later negative check of the provided vector is not necessary.
Remove the negative check and ensure the type used
for the vector is consistent as an unsigned int.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/28521e1b0b091849952b0ecb8c118729fc8cdc4f.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_msi_disable() releases all previously allocated state
associated with each interrupt before disabling MSI/MSI-X.
vfio_msi_disable() iterates twice over the interrupt state:
first directly with a for loop to do virqfd cleanup, followed
by another for loop within vfio_msi_set_block() that removes
the interrupt handler and its associated state using
vfio_msi_set_vector_signal().
Simplify interrupt cleanup by iterating over allocated interrupts
once.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/837acb8cbe86a258a50da05e56a1f17c1a19abbe.1683740667.git.reinette.chatre@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The Designated Vendor-Specific Extended Capability (DVSEC Capability) is an
optional Extended Capability that is permitted to be implemented by any PCI
Express Function. This allows PCI Express component vendors to use
the Extended Capability mechanism to expose vendor-specific registers that can
be present in components by a variety of vendors. A DVSEC Capability structure
can tell vendor-specific software which features a particular component
supports.
An example usage of DVSEC is Intel Platform Monitoring Technology (PMT) for
enumerating and accessing hardware monitoring capabilities on a device.
PMT encompasses three device monitoring features, Telemetry (device metrics),
Watcher (sampling/tracing), and Crashlog. The DVSEC is used to discover these
features and provide a BAR offset to their registers with the Intel vendor code.
The current VFIO driver does not pass DVSEC capabilities to Virtual Machine (VM)
which makes PMT not to work inside the virtual machine. This series adds DVSEC
capability to user visible list to allow its use with VFIO. VFIO supports
passing of Vendor Specific Extended Capability (VSEC) and raw write access to
device. DVSEC also passed to VM in the same way as of VSEC.
Signed-off-by: K V P Satyanarayana <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20230317082222.3355912-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
