commit 5b12933de4 upstream.
In commit df06fd6782 ("can: m_can: m_can_chip_config(): enable and
configure internal timestamps") the timestamping in the m_can core
should be enabled. In peripheral mode, the RX'ed CAN frames, TX
compete frames and error events are sorted by the timestamp.
The above mentioned commit however forgot to enable the timestamping.
Add the missing bits to enable the timestamp counter to the write of
the Timestamp Counter Configuration register.
Link: https://lore.kernel.org/all/20220612212708.4081756-1-mkl@pengutronix.de
Fixes: df06fd6782 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps")
Cc: <stable@vger.kernel.org> # 5.13
Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bda24ef95 upstream.
The gs_usb driver appears to suffer from a malady common to many USB
CAN adapter drivers in that it performs usb_alloc_coherent() to
allocate a number of USB request blocks (URBs) for RX, and then later
relies on usb_kill_anchored_urbs() to free them, but this doesn't
actually free them. As a result, this may be leaking DMA memory that's
been used by the driver.
This commit is an adaptation of the techniques found in the esd_usb2
driver where a similar design pattern led to a memory leak. It
explicitly frees the RX URBs and their DMA memory via a call to
usb_free_coherent(). Since the RX URBs were allocated in the
gs_can_open(), we remove them in gs_can_close() rather than in the
disconnect function as was done in esd_usb2.
For more information, see the 928150fad4 ("can: esd_usb2: fix memory
leak").
Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 562fed945e upstream.
In grcan_probe(), of_find_node_by_path() has already increased the
refcount. There is no need to call of_node_get() again, so remove it.
Link: https://lore.kernel.org/all/20220619070257.4067022-1-windhl@126.com
Fixes: 1e93ed26ac ("can: grcan: grcan_probe(): fix broken system id check for errata workaround needs")
Cc: stable@vger.kernel.org # v5.18
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1b4e32aca upstream.
In commit d5f9023fa6 ("can: bcm: delay release of struct bcm_op
after synchronize_rcu()") Thadeu Lima de Souza Cascardo introduced two
synchronize_rcu() calls in bcm_release() (only once at socket close)
and in bcm_delete_rx_op() (called on removal of each single bcm_op).
Unfortunately this slow removal of the bcm_op's affects user space
applications like cansniffer where the modification of a filter
removes 2048 bcm_op's which blocks the cansniffer application for
40(!) seconds.
In commit 181d444790 ("can: gw: use call_rcu() instead of costly
synchronize_rcu()") Eric Dumazet replaced the synchronize_rcu() calls
with several call_rcu()'s to safely remove the data structures after
the removal of CAN ID subscriptions with can_rx_unregister() calls.
This patch adopts Erics approach for the can-bcm which should be
applicable since the removal of tasklet_kill() in bcm_remove_op() and
the introduction of the HRTIMER_MODE_SOFT timer handling in Linux 5.4.
Fixes: d5f9023fa6 ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") # >= 5.4
Link: https://lore.kernel.org/all/20220520183239.19111-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5e58c4545 upstream.
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() manually on the error
from the probe callback.
Fixes: 5bff69b364 ("ALSA: cs46xx: Allocate resources with device-managed APIs")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jan Engelhardt <jengelh@inai.de>
Link: https://lore.kernel.org/r/p2p1s96o-746-74p4-s95-61qo1p7782pn@vanv.qr
Link: https://lore.kernel.org/r/20220705152336.350-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae8b163156 upstream.
Both Behringer UMC 202 HD and 404 HD need explicit quirks to enable
the implicit feedback mode and start the playback stream primarily.
The former seems fixing the stuttering and the latter is required for
a playback-only case.
Note that the "clock source 41 is not valid" error message still
appears even after this fix, but it should be only once at probe.
The reason of the error is still unknown, but this seems to be mostly
harmless as it's a one-off error and the driver retires the clock
setup and it succeeds afterwards.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215934
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220624101132.14528-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09007af2b6 upstream.
io_import_iovec uses the s pointer, but this was changed immediately
after the iovec was re-imported and so it was imported into the wrong
place.
Change the ordering.
Fixes: 2be2eb02e2 ("io_uring: ensure reads re-import for selected buffers")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630132006.2825668-1-dylany@fb.com
[axboe: ensure we don't half-import as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b75cd21827 upstream.
During the PV driver life cycle the mappings are added to
the RB-tree by set_foreign_p2m_mapping(), which is called from
gnttab_map_refs() and are removed by clear_foreign_p2m_mapping()
which is called from gnttab_unmap_refs(). As both functions end
up calling __set_phys_to_machine_multi() which updates the RB-tree,
this function can be called concurrently.
There is already a "p2m_lock" to protect against concurrent accesses,
but the problem is that the first read of "phys_to_mach.rb_node"
in __set_phys_to_machine_multi() is not covered by it, so this might
lead to the incorrect mappings update (removing in our case) in RB-tree.
In my environment the related issue happens rarely and only when
PV net backend is running, the xen_add_phys_to_mach_entry() claims
that it cannot add new pfn <-> mfn mapping to the tree since it is
already exists which results in a failure when mapping foreign pages.
But there might be other bad consequences related to the non-protected
root reads such use-after-free, etc.
While at it, also fix the similar usage in __pfn_to_mfn(), so
initialize "struct rb_node *n" with the "p2m_lock" held in both
functions to avoid possible bad consequences.
This is CVE-2022-33744 / XSA-406.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f63c2c2032 upstream.
The commit referenced below moved the invocation past the "next" label,
without any explanation. In fact this allows misbehaving backends undue
control over the domain the frontend runs in, as earlier detected errors
require the skb to not be freed (it may be retained for later processing
via xennet_move_rx_slot(), or it may simply be unsafe to have it freed).
This is CVE-2022-33743 / XSA-405.
Fixes: 6c5aa6fc4d ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2400617da7 upstream.
Split the current bounce buffering logic used with persistent grants
into it's own option, and allow enabling it independently of
persistent grants. This allows to reuse the same code paths to
perform the bounce buffering required to avoid leaking contiguous data
in shared pages not part of the request fragments.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33742, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4491001c2e upstream.
Bounce all data on the skbs to be transmitted into zeroed pages if the
backend is untrusted. This avoids leaking data present in the pages
shared with the backend but not part of the skb fragments. This
requires introducing a new helper in order to allocate skbs with a
size multiple of XEN_PAGE_SIZE so we don't leak contiguous data on the
granted pages.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33741, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 307c8de2b0 upstream.
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-33740, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f446ffe9d upstream.
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-26365, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0e51022a0 ]
If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.
Fixes: 8808a793f0 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20b8264394 ]
Kernel uapi headers are supposed to use __[us]{8,16,32,64} types defined
by <linux/types.h> as opposed to 'uint32_t' and similar. See [1] for the
relevant discussion about this topic. In this particular case, the usage
of 'uint64_t' escaped headers_check as these macros are not being called
here. However, the following program triggers a compilation error:
#include <drm/drm_fourcc.h>
int main()
{
unsigned long x = AMD_FMT_MOD_CLEAR(RB);
return 0;
}
gcc error:
drm.c:5:27: error: ‘uint64_t’ undeclared (first use in this function)
5 | unsigned long x = AMD_FMT_MOD_CLEAR(RB);
| ^~~~~~~~~~~~~~~~~
This patch changes AMD_FMT_MOD_{SET,CLEAR} macros to use the correct
integer types, which fixes the above issue.
[1] https://lkml.org/lkml/2019/6/5/18
Fixes: 8ba16d5993 ("drm/fourcc: Add AMD DRM modifiers.")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aacb455dfe ]
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f2c9de83a ]
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83a5ddc3dc ]
In hindsight blindly throwing away most of the key-press events is not
a good idea. So revert commit ed83c91718 ("platform/x86:
panasonic-laptop: Resolve hotkey double trigger bug").
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4326c8d1 ]
Sort includes alphabetically, small cleanup patch in preparation of
further changes.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65a3e6c8d3 ]
In the definition of panasonic_keymap[] the key codes are given in
decimal, later checks are done with hexadecimal values, which does
not help in understanding the code.
Additionally use two helper variables to shorten the code and make
the logic more obvious.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff5a9b6d9 ]
In qoriq_cpufreq_probe(), of_find_matching_node() will return a
node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
Fixes: 157f527639 ("cpufreq: qoriq: convert to a platform driver")
[ Viresh: Fixed Author's name in commit log ]
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d23a80dc9 ]
Currently i915 disables d3cold for i915 pci dev.
This blocks D3 for i915 gfx pci upstream bridge (VSP).
Let's disable d3cold at gfx root port to make sure that
i915 gfx VSP can transition to D3 to save some power.
We don't need to disable/enable d3cold in rpm, s2idle
suspend/resume handlers. Disabling/Enabling d3cold at
gfx root port in probe/remove phase is sufficient.
Fixes: 1a085e2341 ("drm/i915: Disable D3Cold in s2idle and runtime pm")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com
(cherry picked from commit 138c2fca6f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28d76d360 ]
The 'vsync_cnt' is used to count the number of frames for a crtc.
Unfortunately, we increment the count after waking up userspace via
dpu_crtc_vblank_callback() calling drm_crtc_handle_vblank().
drm_crtc_handle_vblank() wakes up userspace processes that have called
drm_wait_vblank_ioctl(), and if that ioctl is expecting the count to
increase it won't.
Increment the count before calling into the drm APIs so that we don't
have to worry about ordering the increment with anything else in drm.
This fixes a software video decode test that fails to see frame counts
increase on Trogdor boards.
Cc: Mark Yacoub <markyacoub@chromium.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Fixes: 885455d6bf ("drm/msm: Change dpu_crtc_get_vblank_counter to use vsync count.")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/490531/
Link: https://lore.kernel.org/r/20220622023855.2970913-1-swboyd@chromium.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 93ed91c020 upstream.
Add ifdef around nodfs variable from patch:
"cifs: don't call cifs_dfs_query_info_nonascii_quirk() if nodfs was set"
which is unused when CONFIG_DFS_UPCALL is not set.
Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff1fa2081d upstream.
Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.
Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.
Fixes: a8fc8cb569 ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 665030fd0c upstream.
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.
A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.
Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.
Fixes: dbe4598c1e ("mlxsw: spectrum_router: Keep nexthops in a linked list")
Fixes: a5390278a5 ("mlxsw: spectrum: Add support for setting counters on nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34ad61514c upstream.
If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target. By default, loop targets will set clear_ids to
true.
This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.
Fixes: 2079f41ec6 ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8698e3bab4 upstream.
Commit ceaf69f8ea ("fanotify: do not allow setting dirent events in
mask of non-dir") added restrictions about setting dirent events in the
mask of a non-dir inode mark, which does not make any sense.
For backward compatibility, these restictions were added only to new
(v5.17+) APIs.
It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or
FAN_ONDIR in the mask of a non-dir inode. Add these flags to the
dir-only restriction of the new APIs as well.
Move the check of the dir-only flags for new APIs into the helper
fanotify_events_supported(), which is only called for FAN_MARK_ADD,
because there is no need to error on an attempt to remove the dir-only
flags from non-dir inode.
Fixes: ceaf69f8ea ("fanotify: do not allow setting dirent events in mask of non-dir")
Link: https://lore.kernel.org/linux-fsdevel/20220627113224.kr2725conevh53u4@quack3.lan/
Link: https://lore.kernel.org/r/20220627174719.2838175-1-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a0cf7ab8d upstream.
Some systems have an ACPI video bus but not ACPI video devices with
backlight capability. On these devices brightness key-presses are
(logically) not reported through the ACPI video bus.
Change how acpi_video_handles_brightness_key_presses() determines if
brightness key-presses are handled by the ACPI video driver to avoid
vendor specific drivers/platform/x86 drivers filtering out their
brightness key-presses even though they are the only ones reporting
these presses.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed0691cf55 upstream.
Data digest calculation iterates over command mapped iovec. However
since commit bac04454ef we unmap the iovec before we handle the data
digest, and since commit 69b85e1f1d we clear nr_mapped when we unmap
the iov.
Instead of open-coding the command iov traversal, simply call
crypto_ahash_digest with the command sg that is already allocated (we
already do that for the send path). Rename nvmet_tcp_send_ddgst to
nvmet_tcp_calc_ddgst and call it from send and recv paths.
Fixes: 69b85e1f1d ("nvmet-tcp: add an helper to free the cmd buffers")
Fixes: bac04454ef ("nvmet-tcp: fix kmap leak when data digest in use")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f0012e351 upstream.
When the third packet of 3WHS connection establishment
contains payload, it is added into socket receive queue
without the XFRM check and the drop of connection tracking
context.
This means that if the data is left unread in the socket
receive queue, conntrack module can not be unloaded.
As most applications usually reads the incoming data
immediately after accept(), bug has been hiding for
quite a long time.
Commit 68822bdf76 ("net: generalize skb freeing
deferral to per-cpu lists") exposed this bug because
even if the application reads this data, the skb
with nfct state could stay in a per-cpu cache for
an arbitrary time, if said cpu no longer process RX softirqs.
Many thanks to Ilya Maximets for reporting this issue,
and for testing various patches:
https://lore.kernel.org/netdev/20220619003919.394622-1-i.maximets@ovn.org/
Note that I also added a missing xfrm4_policy_check() call,
although this is probably not a big issue, as the SYN
packet should have been dropped earlier.
Fixes: b59c270104 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220623050436.1290307-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 668a7a12de upstream.
Offlining cpu6 and cpu7 and then onlining cpu6 hangs on
sc7180-trogdor-lazor because the throttle interrupt doesn't exist.
Similarly, things go sideways when suspend/resume runs. That's because
the qcom_cpufreq_hw_cpu_online() and qcom_cpufreq_hw_lmh_exit()
functions are calling genirq APIs with an interrupt value of '-6', i.e.
-ENXIO, and that isn't good.
Check the value of the throttle interrupt like we already do in other
functions in this file and bail out early from lmh code to fix the hang.
Reported-by: Rob Clark <robdclark@chromium.org>
Cc: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: a1eb080a04 ("cpufreq: qcom-hw: provide online/offline operations")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb8092d70a upstream.
Shuang Li reported a NULL pointer dereference crash:
[] BUG: kernel NULL pointer dereference, address: 0000000000000068
[] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc]
[] Call Trace:
[] <IRQ>
[] tipc_bcast_rcv+0xa2/0x190 [tipc]
[] tipc_node_bc_rcv+0x8b/0x200 [tipc]
[] tipc_rcv+0x3af/0x5b0 [tipc]
[] tipc_udp_recv+0xc7/0x1e0 [tipc]
It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it
creates a node in tipc_node_check_dest(), after inserting the new node
into hashtable in tipc_node_create(), it creates the bc link. However,
there is a gap between this insert and bc link creation, a bc packet
may come in and get the node from the hashtable then try to dereference
its bc link, which is NULL.
This patch is to fix it by moving the bc link creation before inserting
into the hashtable.
Note that for a preliminary node becoming "real", the bc link creation
should also be called before it's rehashed, as we don't create it for
preliminary nodes.
Fixes: 4cbf8ac2fe ("tipc: enable creating a "preliminary" node")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eddd95b942 upstream.
There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.
Fixes: 6be88670fc ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8853e8ce9b upstream.
The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile
control. This has been tested successfully with the ideapad-laptop
DYTC version 5 code; Add the Ideapad 5 15ITL05 to the
ideapad_dytc_v4_allow_table[].
Fixes: 599482c58e ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2f33f0c3a upstream.
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 455cd867b8 ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac790d0988 upstream.
With commit ffa0b64e3b ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
the kernel now validate the addr against high_memory value. This results
in the below BUG_ON with dax pfns.
[ 635.798741][T26531] kernel BUG at mm/page_alloc.c:5521!
1:mon> e
cpu 0x1: Vector: 700 (Program Check) at [c000000007287630]
pc: c00000000055ed48: free_pages.part.0+0x48/0x110
lr: c00000000053ca70: tlb_finish_mmu+0x80/0xd0
sp: c0000000072878d0
msr: 800000000282b033
current = 0xc00000000afabe00
paca = 0xc00000037ffff300 irqmask: 0x03 irq_happened: 0x05
pid = 26531, comm = 50-landscape-sy
kernel BUG at :5521!
Linux version 5.19.0-rc3-14659-g4ec05be7c2e1 (kvaneesh@ltc-boston8) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #625 SMP Thu Jun 23 00:35:43 CDT 2022
1:mon> t
[link register ] c00000000053ca70 tlb_finish_mmu+0x80/0xd0
[c0000000072878d0] c00000000053ca54 tlb_finish_mmu+0x64/0xd0 (unreliable)
[c000000007287900] c000000000539424 exit_mmap+0xe4/0x2a0
[c0000000072879e0] c00000000019fc1c mmput+0xcc/0x210
[c000000007287a20] c000000000629230 begin_new_exec+0x5e0/0xf40
[c000000007287ae0] c00000000070b3cc load_elf_binary+0x3ac/0x1e00
[c000000007287c10] c000000000627af0 bprm_execve+0x3b0/0xaf0
[c000000007287cd0] c000000000628414 do_execveat_common.isra.0+0x1e4/0x310
[c000000007287d80] c00000000062858c sys_execve+0x4c/0x60
[c000000007287db0] c00000000002c1b0 system_call_exception+0x160/0x2c0
[c000000007287e10] c00000000000c53c system_call_common+0xec/0x250
The fix is to make sure we update high_memory on memory hotplug.
This is similar to what x86 does in commit 3072e413e3 ("mm/memory_hotplug: introduce add_pages")
Fixes: ffa0b64e3b ("powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220629050925.31447-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58bf4db695 upstream.
Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].
It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.
So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.
Fixes: 7d4b564d6a ("net: dsa: felix: support psfp filter on vsc9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
