commit 60caa8b33b upstream.
Now that we are reading the full FIFO in the interrupt handler,
it is possible to have an emply FIFO since we are still receiving
1 interrupt per data. Handle correctly this case instead of having
an error causing a reset of the FIFO.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240219154825.90656-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit daec424cc5 upstream.
Track correctly FIFO state and apply ODR change before starting
the chip. Without the fix, you cannot change ODR more than 1 time
when data buffering is off. This restriction on a single pending ODR
change should only apply when the FIFO is on.
Fixes: 111e1abd00 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240219154741.90601-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11dadb6310 upstream.
As specified in the datasheet, the I2C FIFO data register is
0x18, not 0x42. 0x42 was used by mistake when adapting the
ADXL372 driver.
Fix this mistake.
Fixes: cbab791c5e ("iio: accel: add ADXL367 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240207033657.206171-2-demonsingur@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b926914bb upstream.
regmap_read_poll_timeout() will not sleep before reading,
causing the first read to return -ENXIO on I2C, since the
chip does not respond to it while it is being reset.
The datasheet specifies that a soft reset operation has a
latency of 7.5ms.
Add a 15ms sleep between reset and reading the DEVID register,
and switch to a simple regmap_read() call.
Fixes: cbab791c5e ("iio: accel: add ADXL367 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240207033657.206171-1-demonsingur@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5b4e4b7203 ]
Some of the registers on the SARADCv2 have bits write protected except
if another bit is set. This is usually done by having the lowest 16 bits
store the data to write and the highest 16 bits specify which of the 16
lowest bits should have their value written to the hardware block.
The write_enable mask for the channel selection was incorrect because it
was just the value shifted by 16 bits, which means it would only ever
write bits and never clear them. So e.g. if someone starts a conversion
on channel 5, the lowest 4 bits would be 0x5, then starts a conversion
on channel 0, it would still be 5.
Instead of shifting the value by 16 as the mask, let's use the OR'ing of
the appropriate masks shifted by 16.
Note that this is not an issue currently because the only SARADCv2
currently supported has a reset defined in its Device Tree, that reset
resets the SARADC controller before starting a conversion on a channel.
However, this reset is handled as optional by the probe function and
thus proper masking should be used in the event an SARADCv2 without a
reset ever makes it upstream.
Fixes: 757953f8ec ("iio: adc: rockchip_saradc: Add support for RK3588")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-2-84b06a0f623a@theobroma-systems.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0a4546df2 ]
The SARADCv2 on RK3588 (the only SoC currently supported that has an
SARADCv2) selects the channel through the channel_sel bitfield which is
the 4 lowest bits, therefore the mask should be GENMASK(3, 0) and not
GENMASK(15, 0).
Fixes: 757953f8ec ("iio: adc: rockchip_saradc: Add support for RK3588")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-1-84b06a0f623a@theobroma-systems.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb76cc45dc ]
The loop based 64bit division may run for a long time when dividend is a
lot bigger than the divider. Replace the division loop by the
div64_u64() which implementation may be significantly faster.
Tested-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 38416c28e1 ("iio: light: Add gain-time-scale helpers")
Link: https://lore.kernel.org/r/Zcn-6e-0-nh2WcfU@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b67f3e653e upstream.
"bmp085" is missing in bmp280_spi_id[] table, which leads to the next
warning in dmesg:
SPI driver bmp280 has no spi_device_id for bosch,bmp085
Add "bmp085" to bmp280_spi_id[] by mimicking its existing description in
bmp280_of_spi_match[] table to fix the above warning.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: b26b4e9170 ("iio: pressure: bmp280: add SPI interface driver")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35ec2d03b2 upstream.
There are a ton of build errors when REGMAP is not set, so select
REGMAP to fix all of them.
Examples (not all of them):
../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type
495 | static struct regmap_bus bno055_ser_regmap_bus = {
../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write'
496 | .write = bno055_ser_write_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read'
497 | .read = bno055_ser_read_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe':
../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c: At top level:
../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known
495 | static struct regmap_bus bno055_ser_regmap_bus = {
Fixes: 2eef5a9cc6 ("iio: imu: add BNO055 serdev driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrea Merello <andrea.merello@iit.it>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240110185611.19723-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cb81840d8 upstream.
The kernel fails when compiling without `CONFIG_REGMAP_I2C` but with
`CONFIG_BMA400`.
```
ld: drivers/iio/accel/bma400_i2c.o: in function `bma400_i2c_probe':
bma400_i2c.c:(.text+0x23): undefined reference to `__devm_regmap_init_i2c'
```
Link: https://download.01.org/0day-ci/archive/20240131/202401311634.FE5CBVwe-lkp@intel.com/config
Fixes: 465c811f1f ("iio: accel: Add driver for the BMA400")
Fixes: 9bea106423 ("iio: accel: bma400: add support for bma400 spi")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240131225246.14169-1-mario.limonciello@amd.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 792595bab4 upstream.
Recently, we encounter kernel crash in function rm3100_common_probe
caused by out of bound access of array rm3100_samp_rates (because of
underlying hardware failures). Add boundary check to prevent out of
bound access.
Fixes: 121354b2ec ("iio: magnetometer: Add driver support for PNI RM3100")
Suggested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: zhili.liu <zhili.liu@ucas.com.cn>
Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 78367c32be ]
Currently, GPIO_CTRL bits are set even if the pins are used for
measurements.
GPIO_CTRL bits should only be set if the pin is not used for
other functionality.
Fix this by only setting the GPIO_CTRL bits if the pin has no
other function.
Fixes: 62094060cf ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240207132007.253768-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a22b0a2be6 ]
The clk_init_data struct does not have all its members
initialized, causing issues when trying to expose the internal
clock on the CLK pin.
Fix this by zero-initializing the clk_init_data struct.
Fixes: 62094060cf ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240207132007.253768-1-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 621c625712 upstream.
When als_capture_sample() is called with usage ID
HID_USAGE_SENSOR_TIME_TIMESTAMP, return 0. The HID sensor core ignores
the return value for capture_sample() callback, so return value doesn't
make difference. But correct the return value to return success instead
of -EINVAL.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240204125617.2635574-1-srinivas.pandruvada@linux.intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e71c5c89bc ]
The ADC needs a voltage reference to work correctly.
Users can provide an external voltage reference or use the chip internal
reference to operate the ADC.
The availability of an in chip reference for the ADC saves the user from
having to supply an external voltage reference, which makes the external
reference an optional property as described in the device tree
documentation.
Though, to use the internal reference, it must be enabled by writing to
the configuration register.
Enable AD7091R internal voltage reference if no external vref is supplied.
Fixes: 260442cc5b ("iio: adc: ad7091r5: Add scale and external VREF support")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 020e71c7ff ]
AD7091R-5 devices are supported by the ad7091r-5 driver together with
the ad7091r-base driver. Those drivers declared iio events for notifying
user space when ADC readings fall bellow the thresholds of low limit
registers or above the values set in high limit registers.
However, to configure iio events and their thresholds, a set of callback
functions must be implemented and those were not present until now.
The consequence of trying to configure ad7091r-5 events without the
proper callback functions was a null pointer dereference in the kernel
because the pointers to the callback functions were not set.
Implement event configuration callbacks allowing users to read/write
event thresholds and enable/disable event generation.
Since the event spec structs are generic to AD7091R devices, also move
those from the ad7091r-5 driver the base driver so they can be reused
when support for ad7091r-2/-4/-8 be added.
Fixes: ca69300173 ("iio: adc: Add support for AD7091R5 ADC")
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 149694f5e7 ]
The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 020e71c7ff ("iio: adc: ad7091r: Allow users to configure device events")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b73f08bb7f ]
When reading in_voltage_scale we can get something like:
root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146
However, when reading the available options:
root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 737720197b ]
When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-3-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76f028539c ]
The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.
While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a25a7df518 upstream.
Previous version of ad7091r event handler received the ADC state pointer
and retrieved the iio device from driver data field with dev_get_drvdata().
However, no driver data have ever been set, which led to null pointer
dereference when running the event handler.
Pass the iio device to the event handler and retrieve the ADC state struct
from it so we avoid the null pointer dereference and save the driver from
filling the driver data field.
Fixes: ca69300173 ("iio: adc: Add support for AD7091R5 ADC")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1cd2fe4fd6 ]
assign_bit() expects a bit number and not a mask like BIT(x). Hence,
just remove the BIT() macro from the #defines.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311060647.i9XyO4ej-lkp@intel.com/
Fixes: fff7352bf7 ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231106150730.945-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bce61476dc upstream.
Commit ee708e6baa ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes: ee708e6baa ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b8157ec45 upstream.
The current offset has the scale already applied to it. The ABI
documentation defines the offset parameter as "offset to be added
to <type>[Y]_raw prior to scaling by <type>[Y]_scale in order to
obtain value in the <type> units as specified in <type>[Y]_raw
documentation"
The right value is obtained at 0 degrees Celsius by the formula provided
in the datasheet:
T = Tsens_t0 + (Tadc_t - Tadc_t0) / Tadc_res
where:
T = 0 degrees Celsius
Tsens_t0 (reference temperature) = 25 degrees Celsius
Tadc_t0 (16-bit format for Tsens_t0) = 17508
Tadc_res = 60.1 LSB/degree Celsius
The resulting offset is 16005.5, which has been truncated to 16005 to
provide an integer value with a precision loss smaller than the 1-LSB
measurement precision.
Fix the offset to apply its value prior to scaling.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/9879beec-05fc-4fc6-af62-d771e238954e@wolfvision.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60576e84c1 upstream.
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
Fixes: f438b9da75 ("drivers: iio: ti_am335x_adc: add dma support")
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee4d79055a upstream.
This prevents the warning message "SPI driver has no spi_device_id for..."
when registering the driver. More importantly, it makes sure that
module autoloading works as spi relies on spi: modaliases and not of.
While at it, move the of_device_id table to it's natural place.
Fixes: fff7352bf7 ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54cf39ec16 upstream.
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
Index [7,0]
--------------
idx 0 0,0
idx 1 1,0
idx 2 0,1
idx 3 1,1
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
Index [7,0] Trh
-----------------------
idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000)
idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000)
idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000)
idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000)
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes: d574a87cc3 ("Add meas-spec sensors common part")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2475ecdb9b upstream.
According to the spec, this ADC totally support 8 channels.
i.MX93 contain this ADC with 4 channels connected to pins in
the package. i.MX95 contain this ADC with 8 channels connected
to pins in the package.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: 7d02296ac8 ("iio: adc: add imx93 adc support")
Link: https://lore.kernel.org/r/20231116071026.611269-1-haibo.chen@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92bfa4ab1b upstream.
The IIO ABI mandates acceleration values from accelerometer to be
emitted in m/s^2. The KX022A was emitting values in micro m/s^2.
Fix driver to report the correct scale values.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Jagath Jog J <jagathjog1996@gmail.com>
Fixes: 7c1d1677b3 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Tested-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/ZTEt7NqfDHPOkm8j@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59b75dcb09 ]
According to Amlogic custom kernels ADC of axg SoC family has
vref_select and requires this setting to work nominally and thus
needs a separate config.
Fixes: 90c6241860 ("iio: adc: meson: init voltage control bits")
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231127235558.71995-1-gnstark@salutedevices.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3df0e29fb ]
inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the
true value rather than only return IIO_VAL_INT.
Fixes: d509844714 ("iio: imu: mpu6050: add calibration offset support")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a23b384e7 ]
of_match_device() may fail and returns a NULL pointer.
In practice there is no known reasonable way to trigger this, but
in case one is added in future, harden the code by adding the check
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_994DA85912C937E3B5405BA960B31ED90A08@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9979cc6485 ]
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
Also replace devm_regulator_get() and regulator_enable() with
devm_regulator_get_enable() helper and remove regulator_disable().
Replace iio_device_register() with devm_iio_device_register() and remove
iio_device_unregister().
And st->reg is not used anymore, so remove it.
As Jonathan pointed out, couple of things that are wrong:
1) The device is powered down 'before' we unregister it with the
subsystem and as such userspace interfaces are still exposed which
probably won't do the right thing if the chip is powered down.
2) This isn't done in the error paths in probe.
To solve this problem, register a new callback adf4350_power_down()
with devm_add_action_or_reset(), to enable software power down in both
error and device detach path. So the remove function can be removed.
Remove spi_set_drvdata() from the probe function, since spi_get_drvdata()
is not used anymore.
Fixes: e31166f0fd ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230828062717.2310219-1-ruanjinjie@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
As noted by Jonathan Cameron: it is perfectly legal for a channel
to have an offset but no scale in addition to the raw interface.
The conversion will imply that scale is 1:1.
Make rescale_configure_channel() accept just scale, or just offset
to process a channel.
When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw()
we now have to deal with the fact that OFFSET could be present
but SCALE missing. Add code to simply scale 1:1 in this case.
Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/
Fixes: 53ebee9499 ("iio: afe: iio-rescale: Support processed channels")
Fixes: 9decacd8b3 ("iio: afe: rescale: Fix boolean logic bug")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Second interrupt is needed only when touchscreen mode is used, so don't
request it unconditionally. This removes the following annoying warning
during boot:
exynos-adc 14d10000.adc: error -ENXIO: IRQ index 1 not found
Fixes: 2bb8ad9b44 ("iio: exynos-adc: add experimental touchscreen support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver was previously using offset and scale values for the
temperature sensor readings which were only valid for 7-series devices.
Add per-device-type values for offset and scale and set them appropriately
for each device type.
Note that the values used for the UltraScale family are for UltraScale+
(i.e. the SYSMONE4 primitive) using the internal reference, as that seems
to be the most common configuration and the device tree values Xilinx's
device tree generator produces don't seem to give us anything to tell us
which configuration is used. However, the differences within the UltraScale
family seem fairly minor and it's closer than using the 7-series values
instead in any case.
Fixes: c2b7720a79 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the probe function, the driver was reading out the thresholds already
set in the core, which can be configured by the user in the Vivado tools
when the FPGA image is built. However, it later clobbered those values
with zero or maximum values. In particular, the overtemperature shutdown
threshold register was overwritten with the max value, which effectively
prevents the FPGA from shutting down when the desired threshold was
eached, potentially risking hardware damage in that case.
Remove this code to leave the preconfigured default threshold values
intact.
The code was also disabling all alarms regardless of what enable state
they were left in by the FPGA image, including the overtemperature
shutdown feature. Leave these bits in their original state so they are
not unconditionally disabled.
Fixes: bdc8cda1d0 ("iio:adc: Add Xilinx XADC driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips
with "PROM integrity check failed" because it doesn't accept a prom crc
value of zero as legitimate.
According to the datasheet for this chip (and the manufacturer's
application note about the PROM CRC), none of the possible values for the
CRC are excluded - but the current code in ms5611_prom_is_valid() ends with
return crc_orig != 0x0000 && crc == crc_orig
Discussed with the driver author (Tomasz Duszynski) and he indicated that
at that time (2015) he was dealing with some faulty chip samples which
returned blank data under some circumstances and/or followed example code
which indicated CRC zero being bad.
As far as I can tell this exception should not be applied anymore; We've
got a few hundred custom boards here with this chip where large numbers
of the prom have a legitimate CRC value 0, and do work fine, but which the
current driver code wrongly rejects.
Signed-off-by: Alexander Zangerl <az@breathe-safe.com>
Fixes: c0644160a8 ("iio: pressure: add support for MS5611 pressure and temperature sensor")
Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The avdd and the reference voltage are two different sources but the
reference voltage was assigned according to the avdd supply.
Add vref regulator structure and set the reference voltage according to
the vref supply from the devicetree.
In case vref supply is missing, reference voltage is set according to
the avdd supply for compatibility with old devicetrees.
Fixes: b581f748cc ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After enabling/disabling interrupts on the vcnl4040 chip the als and/or
ps sensor is powered on or off depending on the interrupt enable bits.
This is made as a last step in write_event_config.
But there is no reason to do this as the runtime PM handles the power
state of the sensors. Interfering with this may impact sensor readings.
Consider the following:
1. Userspace makes sensor data reading which triggers RPM resume
(sensor powered on) and a RPM suspend timeout. The timeout is 2000ms
before RPM suspend powers the sensor off if no new reading is made
within the timeout period.
2. Userspace disables interrupts => powers sensor off
3. Userspace reads sensor data = 0 because sensor is off and the
suspend timeout has not passed. For each new reading made within the
timeout period the timeout is renewed with 2000ms and RPM will not
make a new resume (device was not suspended). So the sensor will
not be powered on.
4. No further userspace reading for 2000ms ends RPM suspend timeout and
triggers suspend (powers off already powered off sensor).
Powering sensor off in (2) makes all consecutive readings made within
2000ms to the previous reading (3) return invalid data.
Skip setting power state when writing new event config.
Fixes: 546676121c ("iio: light: vcnl4000: Add interrupt support for vcnl4040")
Fixes: bc292aaf9c ("iio: light: vcnl4000: add illuminance irq vcnl4040/4200")
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20230907-vcnl4000-pm-fix-v2-1-298e01f54db4@axis.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Building ad74413r without selecting IIO_BUFFER and
IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger
functions that are used within the driver.
Update the Kconfig accordingly.
Fixes: fea251b6a5 ("iio: addac: add AD74413R driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DPS310 sensor chip has been encountering intermittent errors while
reading the sensor device across various system designs. This issue causes
the chip to become "stuck," preventing the indication of "ready" status
for pressure and temperature measurements in the MEAS_CFG register.
To address this issue, this commit fixes the timeout settings to improve
sensor stability:
- After sending a reset command to the chip, the timeout has been extended
from 2.5 ms to 15 ms, aligning with the DPS310 specification.
- The read timeout value of the MEAS_CFG register has been adjusted from
20ms to 30ms to match the specification.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Fixes: 7b4ab4abce ("iio: pressure: dps310: Reset chip after timeout")
Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver uses IIO triggered buffers so it needs to select them in
Kconfig.
on riscv-32bit:
/opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367':
bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/
Fixes: 4aefe1c2bd ("iio: imu: add Bosch Sensortec BNO055 core driver")
Cc: Andrea Merello <andrea.merello@iit.it>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC Command Buffer Register high and low are currently pointing to
the wrong address and makes it impossible to perform correct
ADC measurements over all channels.
According to the datasheet of the imx8qxp the ADC_CMDL register starts
at address 0x100 and the ADC_CMDH register starts at address 0x104.
This bug seems to be in the kernel since the introduction of this
driver.
This can be observed by checking all raw voltages of the adc and they
are all nearly identical:
cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw
3498
3494
3491
3491
3489
3490
3490
3490
Fixes: 1e23dcaa1a ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and
calls iio_push_to_buffers_with_timestamp() without making sure the
`indio_dev` stays in buffer mode. There is a race if `indio_dev` exits
buffer mode right before cros_ec_sensors_push_data() accesses them.
An use-after-free on `indio_dev->active_scan_mask` was observed. The
call trace:
[...]
_find_next_bit
cros_ec_sensors_push_data
cros_ec_sensorhub_event
blocking_notifier_call_chain
cros_ec_irq_thread
It was caused by a race condition: one thread just freed
`active_scan_mask` at [1]; while another thread tried to access the
memory at [2].
Fix it by calling iio_device_claim_buffer_mode() to ensure the
`indio_dev` can't exit buffer mode during cros_ec_sensors_push_data().
[1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189
[2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198
Cc: stable@vger.kernel.org
Fixes: aa984f1ba4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When compiling with gcc 13 with -Warray-bounds enabled:
In file included from drivers/iio/proximity/irsd200.c:15:
In function ‘iio_push_to_buffers_with_timestamp’,
inlined from ‘irsd200_trigger_handler’ at drivers/iio/proximity/irsd200.c:770:2:
./include/linux/iio/buffer.h:42:46: error: array subscript ‘int64_t {aka long long int}[0]’
is partly outside array bounds of ‘s16[1]’ {aka ‘short int[1]’} [-Werror=array-bounds=]
42 | ((int64_t *)data)[ts_offset] = timestamp;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
drivers/iio/proximity/irsd200.c: In function ‘irsd200_trigger_handler’:
drivers/iio/proximity/irsd200.c:763:13: note: object ‘buf’ of size 2
763 | s16 buf = 0;
| ^~~
The problem seems to be that irsd200_trigger_handler() is taking a s16
variable as an int64_t buffer. As Jonathan suggested [1], fix it by
extending the buffer to a two-element array of s64.
Link: https://github.com/KSPP/linux/issues/331
Link: https://lore.kernel.org/lkml/20230809181329.46c00a5d@jic23-huawei/ [1]
Fixes: 3db3562bc6 ("iio: Add driver for Murata IRS-D200")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Waqar Hameed <waqar.hameed@axis.com>
Tested-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230810035910.1334706-1-gongruiqi@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include the corner cases in the computation of the MIXER_VGATE register
value.
According to the datasheet: The MIXER_VGATE values follows the VCM such
as, that for a 0V to 1.8V VCM, MIXER_VGATE = 23.89 VCM + 81, and for a >
1.8V to 2.6V VCM, MIXER_VGATE = 23.75 VCM + 1.25.
Fixes: da35a7b526 ("iio: frequency: admv1013: add support for ADMV1013")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230807143806.6954-1-antoniu.miclaus@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jean-Baptiste Maneyrol