To work around a DMC/Punit issue on ICL where the driver's
ICL_PORT_COMP_DW8/IREFGEN PHY setting is lost when entering/exiting DC6
state, make sure to reinit the PHY whenever disabling DC states.
Similarly the driver's PHY/DBUF/CDCLK settings should have been preserved
across DC5/6 transitions, so check this on all platforms.
This gets rid of the following WARN during suspend:
Combo PHY A HW state changed unexpectedly
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816095523.15800-1-imre.deak@intel.com
The conversion during HDMI HW readout from port_clock to crtc_clock was
missed when HDMI 10bpc support was added, so fix that.
v2:
- Unscrew the non-HDMI case.
Fixes: cd9e11a8bf ("drm/i915/icl: Add 10-bit support for hdmi")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808162547.7009-1-imre.deak@intel.com
Inside gtt_restore_mappings() we currently take the obj->resv->lock, but
in the future we need to avoid taking this fs-reclaim tainted lock as we
need to extend the coverage of the vm->mutex. Take advantage of the
single-threaded nature of the early resume phase, and do a single
wbinvd() to flush all the GTT objects en masse.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819200705.3631-1-chris@chris-wilson.co.uk
Our pin mapping tables for ICP and MCC currently only list the standard
GPIO pins used for various output ports. Even through ICP's standard
pin usage only utilizes pins 1, 2, and 9-12, and MCC's standard pin
usage only uses pins 1, 2, and 9, these platforms do still have GPIO
registers to address pins in the range 1-3 and 9-14. OEM's may remap
GPIO usage in non-standard ways (and provide the actual mapping via VBT
settings), so we shouldn't exclude pins on these platforms just because
they aren't part of the standard mappings.
TGP's standard pin tables contains all the possible pins, so let's
rename them to "icp" and use them for all PCH >= PCH_ICP. This will
prevent intel_gmbus_is_valid_pin from rejecting non-standard pin usage
that an OEM specifies via the VBT.
Note that this will cause pin 9 to be labeled as "tc1" instead of "dpc"
in debug messages on platforms with the MCC PCH, but that may actually
help avoid confusion since the text strings will now be the same on all
gen11+ platforms instead of being different on just EHL.
v2: Drop now-unused MCC_DDC_BUS_DDI_* names.
v3: We want to compare against INTEL_PCH_TYPE, not INTEL_PCH_ID.
Bspec: 8417
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817005041.20651-1-matthew.d.roper@intel.com
Make sure that when submitting requests, we always serialize against
potential vma moves and clflushes.
Time for a i915_request_await_vma() interface!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819112033.30638-1-chris@chris-wilson.co.uk
We use a fake timeline->mutex lock to reassure lockdep that the timeline
is always locked when emitting requests. However, the use inside
__engine_park() may be inside hardirq and so lockdep now complains about
the mixed irq-state of the nested locked. Disable irqs around the
lockdep tracking to keep it happy.
Fixes: 6c69a45445 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819075835.20065-3-chris@chris-wilson.co.uk
Errors spread like wildfire, and must eventually be returned to the
user. They need to be captured and passed along the flow of fences,
infecting each in turn with the existing error, until finally they fall
out of a user visible result.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817232511.11391-1-chris@chris-wilson.co.uk
There is no need to mark whole GPU as wedged just because
of the custom HuC fw failure as users can always verify
actual HuC firmware status using existing HUC_STATUS ioctl.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-4-michal.wajdeczko@intel.com
If we failed to fetch default GuC firmware and we didn't plan
to use it for the submission and we never have used GuC before
then we may continue normal driver load, no need to declare
GPU wedged (we can use execlist for submission) and it is safe
to run without the HuC (users will check HuC status anyway).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-3-michal.wajdeczko@intel.com
As we plan to continue driver load after GuC initialization
failure, we can't assume that GuC log data will be available
just because GuC was initially enabled. We must check that
GuC is still running instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190818095204.31568-2-michal.wajdeczko@intel.com
Let's wait with decision about importance of uC failure to
hardware initialization step.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-4-michal.wajdeczko@intel.com
Be consistent and always perform fw fetch cleanup in GuC/HuC specific
init functions on every failure. Also while converting firmware
status to error, stop treating SELECTED as non-error, as long term
we should not see it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-3-michal.wajdeczko@intel.com
We can rely on firmware status AVAILABLE to determine if any
firmware cleanup is required. Also don't unconditionally reset
fw status to SELECTED as we will loose MISSING/ERROR codes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817131144.26884-2-michal.wajdeczko@intel.com
Add a redzone to our context image and check the HW does not write into
after a context save, to verify that we have the correct context size.
(This does vary with feature bits, so test with a live setup that should
match how we run userspace.)
v2: Check the redzone on every context unpin
v3: Use a kernel context to prevent loading garbage for ringbuffer
submission
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817073711.5897-1-chris@chris-wilson.co.uk
As we give page directory pointer (lvl 3) structure
for pte insertion, we can fold both versions into
one function by teaching it to get pdp regardless
of top level.
v2: naming and asserts (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816094754.26492-1-mika.kuoppala@linux.intel.com
We really need to have separate NOT_SUPPORTED state (for
lack of hardware support) and DISABLED state (to indicate
user decision) as we will have to take special steps even
if GuC firmware is now disabled but hardware exists and
could have been previously used.
v2: fix logic (Chris/CI)
v3: use proper check to avoid probe failure (CI)
v4: explain status transitions (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816205658.15020-1-michal.wajdeczko@intel.com
To reduce the number of explicit dev_priv->uncore calls in the display
code ahead of the introduction of dev_priv->de_uncore, this patch
introduces a wrapper for one of the main usages of it, the register
waits. When we transition to the new uncore, we can just update the
wrapper to point to the appropriate structure.
Since the vast majority of waits are on a set or clear of a bit or mask,
add set & clear flavours of the wrapper to simplify the code.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-7-daniele.ceraolospurio@intel.com
They're not related to registers, so move them to the more appropriate
intel_gmbus.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-4-daniele.ceraolospurio@intel.com
To remove the dependency between the GT headers and i915_reg.h, move the
definition of the engine IDs/classes to intel_engine_types.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-3-daniele.ceraolospurio@intel.com
It has nothing to do with registers, so move it to the more appropriate
intel_display_power.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-2-daniele.ceraolospurio@intel.com
If we only call process_csb() from the tasklet, though we lose the
ability to bypass ksoftirqd interrupt processing on direct submission
paths, we can push it out of the irq-off spinlock.
The penalty is that we then allow schedule_out to be called concurrently
with schedule_in requiring us to handle the usage count (baked into the
pointer itself) atomically.
As we do kick the tasklets (via local_bh_enable()) after our submission,
there is a possibility there to see if we can pull the local softirq
processing back from the ksoftirqd.
v2: Store the 'switch_priority_hint' on submission, so that we can
safely check during process_csb().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816171608.11760-1-chris@chris-wilson.co.uk
As every i915_active_request should be serialised by a dedicated lock,
i915_active consists of a tree of locks; one for each node. Markup up
the i915_active_request with what lock is supposed to be guarding it so
that we can verify that the serialised updated are indeed serialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-2-chris@chris-wilson.co.uk
We use timeline->mutex to protect modifications to
context->active_count, and the associated enable/disable callbacks.
Due to complications with engine-pm barrier there is a path where we used
a "superlock" to provide serialised protect and so could not
unconditionally assert with lockdep that it was always held. However,
we can mark the mutex as taken (noting that we may be nested underneath
ourselves) which means we can be reassured the right timeline->mutex is
always treated as held and let lockdep roam free.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-1-chris@chris-wilson.co.uk
All WOPCM error messages are device specific, so use
device specific error functions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-5-michal.wajdeczko@intel.com
If WOPCM layout is already locked in HW we shouldn't continue
with our own partitioning as it could be likely different and
we will be unable to enforce it and fail. Instead we should try
to reuse what is already programmed, maybe there will be a fit.
This should enable us to reload driver with slightly different
HuC firmware (or even without HuC) without need to reboot.
v2: reordered/rebased
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-4-michal.wajdeczko@intel.com
We can do WOPCM partitioning using rough estimates and limits
and perform detailed check as separate step.
v2: oops! s/max/min
v3: consolidate overflow checks (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-3-michal.wajdeczko@intel.com
While we need to know WOPCM size to do this sanity check, it has more to
do with FW than with WOPCM. Let's move the check to fetch phase, it's
not like WOPCM is going to grow in the meantime.
v2: rebased
v3: use __intel_uc_fw_get_upload_size (Daniele)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jackie Li <yaodong.li@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-2-michal.wajdeczko@intel.com
Since nodes are cached in a free-list, and potentially marked as free
without actually being destroyed, thus allowing them to be
opportunistically re-allocated, we should apply kmemleak_update_trace
every time a node is given a new owner and marked as allocated, to aid
in debugging.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105357.14340-2-matthew.auld@intel.com
If we are leaking nodes don't hide it. Also stop trying to be
"defensive" and instead embrace Kasan et al.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105357.14340-1-matthew.auld@intel.com
Move the active tracking for the frontbuffer operations out of the
i915_gem_object and into its own first class (refcounted) object. In the
process of detangling, we switch from low level request tracking to the
easier i915_active -- with the plan that this avoids any potential
atomic callbacks as the frontbuffer tracking wishes to sleep as it
flushes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816074635.26062-1-chris@chris-wilson.co.uk
Forgo the struct_mutex requirement for request retirement as we have
been transitioning over to only using the timeline->mutex for
controlling the lifetime of a request on that timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-4-chris@chris-wilson.co.uk
In preparation for removing struct_mutex from around context retirement,
we need to make timeline pinning and unpinning safe. Since multiple
engines/contexts can share a single timeline, we cannot rely on
borrowing the context mutex (otherwise we could state that the timeline
is only pinned/unpinned inside the context pin/unpin and so guarded by
it). However, we only perform a sequence of atomic operations inside the
timeline pin/unpin and the sequence of those operations is safe for a
concurrent unpin / pin, so we can relax the struct_mutex requirement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-3-chris@chris-wilson.co.uk
Since __i915_request_queue() may be called from hardirq (timer) context,
we cannot use local_bh_disable/enable at the lower level. As we do want
to kick the tasklet to speed up initial submission or preemption for
normal client submission, lift it to the normal process context
callpath.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815042031.27750-1-chris@chris-wilson.co.uk
Flush according to what gen11 expects when writing
breadcrumbs. As only the seqnowrite + flush differs
between engine and gens, enclose the footer to
helper.
v2: avoid problem of sane local naming by not using them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815094929.358-1-mika.kuoppala@linux.intel.com
Add tile cache flushing for gen11. To relive us from the
burden of previous obsolete workarounds, make a dedicated
flush/invalidate callback for gen11.
To fortify an independent single flush, do post
sync op as there are indications that without it
we don't flush everything. This should also make this
callback more readily usable in tgl (see l3 fabric flush).
v2: whitespacing
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815083055.14132-1-mika.kuoppala@linux.intel.com
Dan reported the following static checker warning:
drivers/gpu/drm/i915/selftests/i915_buddy.c:670 igt_buddy_alloc_range()
error: we previously assumed 'block' could be null (see line 665)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815103210.11802-1-matthew.auld@intel.com
Looking around the GT initialisation, we have a few log messages we
think are interesting enough present to the user (such as the amount of L4
cache) and a few to inform them of the result of actions or conflicting
HW restrictions (i.e. quirks). These are device specific messages, so
use the dev family of printk.
v2: shave off a few bytes of .rodata!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815093604.3618-1-chris@chris-wilson.co.uk
We use the request pointer inside the i915_active_node as the indicator
of the barrier's status; we mark it as used during
i915_request_add_active_barriers(), and search for an available barrier
in reuse_idle_barrier(). That check must be carefully serialised to
ensure we do use an engine for the barrier and not just a random
pointer. (Along the other reuse path, we are fully serialised by the
timeline->mutex.) The acquisition of the barrier itself is ordered through
the strong memory barrier in llist_del_all().
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111397
Fixes: d8af05ff38 ("drm/i915: Allow sharing the idle-barrier from other kernel requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813200905.11369-1-chris@chris-wilson.co.uk
The fb_base is only used for communicating the GTT BAR from one piece of
the display code (kms setup) to another (fbdev). What is required in the
fbdev is just the aperture address which should be derived from the
bo we allocate for the framebuffer directly.
The same appears true for drm/; it is not used by the core or the uAPI,
it is merely for conveniently passing a device address from bit of
display management code to another.
v2: Note that since we only expose enough of a system map to cover our
single framebuffer, the screen_base/size and the smem are one and the
same.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813182112.23227-1-chris@chris-wilson.co.uk
