The IOMMU driver shares the pasid table for PCI alias devices. When the
RID2PASID entry of the shared pasid table has been filled by the first
device, the subsequent device will encounter the "DMAR: Setup RID2PASID
failed" failure as the pasid entry has already been marked as present.
As the result, the IOMMU probing process will be aborted.
On the contrary, when any alias device is hot-removed from the system,
for example, by writing to /sys/bus/pci/devices/.../remove, the shared
RID2PASID will be cleared without any notifications to other devices.
As the result, any DMAs from those rest devices are blocked.
Sharing pasid table among PCI alias devices could save two memory pages
for devices underneath the PCIe-to-PCI bridges. Anyway, considering that
those devices are rare on modern platforms that support VT-d in scalable
mode and the saved memory is negligible, it's reasonable to remove this
part of immature code to make the driver feasible and stable.
Fixes: ef848b7e5a ("iommu/vt-d: Setup pasid entry for RID2PASID support")
Reported-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Notifier calling chain uses priority to determine the execution
order of the notifiers or listeners registered to the chain.
PCI bus device hot add utilizes the notification mechanism.
The current code sets low priority (INT_MIN) to Intel
dmar_pci_bus_notifier and postpones DMAR decoding after adding
new device into IOMMU. The result is that struct device pointer
cannot be found in DRHD search for the new device's DMAR/IOMMU.
Subsequently, the device is put under the "catch-all" IOMMU
instead of the correct one. This could cause system hang when
device TLB invalidation is sent to the wrong IOMMU. Invalidation
timeout error and hard lockup have been observed and data
inconsistency/crush may occur as well.
This patch fixes the issue by setting a positive priority(1) for
dmar_pci_bus_notifier while the priority of IOMMU bus notifier
uses the default value(0), therefore DMAR decoding will be in
advance of DRHD search for a new device to find the correct IOMMU.
Following is a 2-step example that triggers the bug by simulating
PCI device hot add behavior in Intel Sapphire Rapids server.
echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove
echo 1 > /sys/bus/pci/rescan
Fixes: 59ce0515cd ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope")
Cc: stable@vger.kernel.org # v3.15+
Reported-by: Zhang, Bernice <bernice.zhang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Intel VT-d driver updates
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU
legacy binding
- Minor cleanups
- Patches to fix a BUG_ON in the vfio_iommu_group_notifier
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group
is either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Patches to make forcing of cache-coherent DMA more coherent
between IOMMU drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=W0hj
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
-----BEGIN PGP SIGNATURE-----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=n2rk
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
On some systems it can take a long time for the hardware to enable the
GA log of the AMD IOMMU. The current wait time is only 0.1ms, but
testing showed that it can take up to 14ms for the GA log to enter
running state after it has been enabled.
Sometimes the long delay happens when booting the system, sometimes
only on resume. Adjust the timeout accordingly to not print a warning
when hardware takes a longer than usual.
There has already been an attempt to fix this with commit
9b45a7738e ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")
But that commit was based on some wrong math and did not fix the issue
in all cases.
Cc: "D. Ziegfeld" <dzigg@posteo.de>
Cc: Jörg-Volker Peetz <jvpeetz@web.de>
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220520102214.12563-1-joro@8bytes.org
Since commit 0286300e60 ("iommu: iommu_group_claim_dma_owner() must
always assign a domain") s390-iommu will get called to allocate multiple
unmanaged iommu domains for a vfio-pci device -- however the current
s390-iommu logic tolerates only one. Recognize that multiple domains can
be allocated and handle switching between DMA or different iommu domain
tables during attach_dev.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220519182929.581898-1-mjrosato@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy binding
- Minor cleanups
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmJ6eJ0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNNroB/92+cfwPyDnA8qdsSCAbyRU2ChrcZvHfKom
0YxnN6mxQxevcFcLEg8NfbueVgcpZuogrVmBy2ES7s/yJwyFbHk9Pxsq8WO1oMNC
idIZHjpS9AC4yItgHPzmZd0sUEzmOgINMjHFxdXVnVz4F6EpfrPfRucaBBDe4y1M
QjKKkjFhMuKjiZWBbQYxRjTJR2LelpK3c2rWhdBxqOLpFJ+XoEcBcaPqiLU5BLcE
Lbzg88ldneFfM8ixAv0fFY+agxv0vorWXS7GDFOg0nRStMqOeI6Y1mOSKnskVtcD
dc+Gm8tX7ObeDu/59l+2BsebSemMYapdy7QCEAQDKmna6SayFFA4
=Z0YK
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.19
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy binding
- Minor cleanups
As domain->force_snooping only impacts the devices attached with the
domain, there's no need to check against all IOMMU units. On the other
hand, force_snooping could be set on a domain no matter whether it has
been attached or not, and once set it is an immutable flag. If no
device attached, the operation always succeeds. Then this empty domain
can be only attached to a device of which the IOMMU supports snoop
control.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the attach_dev callback of the default domain ops, if the domain has
been set force_snooping, but the iommu hardware of the device does not
support SC(Snoop Control) capability, the callback should block it and
return a corresponding error code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Originally, creating the dma_ranges resource list in pre-sorted fashion
was the simplest and most efficient way to enforce the order required by
iova_reserve_pci_windows(). However since then at least one PCI host
driver is now re-sorting the list for its own probe-time processing,
which doesn't seem entirely unreasonable, so that basic assumption no
longer holds. Make iommu-dma robust and get the sort order it needs by
explicitly sorting, which means we can also save the effort at creation
time and just build the list in whatever natural order the DT had.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/35661036a7e4160850895f9b37f35408b6a29f2f.1652091160.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The data type of the return value of the iommu_map_sg_atomic
is ssize_t, but the data type of iova size is size_t,
e.g. one is int while the other is unsigned int.
When iommu_map_sg_atomic return value is compared with iova size,
it will force the signed int to be converted to unsigned int, if
iova map fails and iommu_map_sg_atomic return error code is less
than 0, then (ret < iova_len) is false, which will to cause not
do free iova, and the master can still successfully get the iova
of map fail, which is not expected.
Therefore, we need to check the return value of iommu_map_sg_atomic
in two cases according to whether it is less than 0.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Cc: <stable@vger.kernel.org> # 5.15.*
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220507085204.16914-1-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Once the group enters 'owned' mode it can never be assigned back to the
default_domain or to a NULL domain. It must always be actively assigned to
a current domain. If the caller hasn't provided a domain then the core
must provide an explicit DMA blocking domain that has no DMA map.
Lazily create a group-global blocking DMA domain when
iommu_group_claim_dma_owner is first called and immediately assign the
group to it. This ensures that DMA is immediately fully isolated on all
IOMMU drivers.
If the user attaches/detaches while owned then detach will set the group
back to the blocking domain.
Slightly reorganize the call chains so that
__iommu_group_set_core_domain() is the function that removes any caller
configured domain and sets the domains back a core owned domain with an
appropriate lifetime.
__iommu_group_set_domain() is the worker function that can change the
domain assigned to a group to any target domain, including NULL.
Add comments clarifying how the NULL vs detach_dev vs default_domain works
based on Robin's remarks.
This fixes an oops with VFIO and SMMUv3 because VFIO will call
iommu_detach_group() and then immediately iommu_domain_free(), but
SMMUv3 has no way to know that the domain it is holding a pointer to
has been freed. Now the iommu_detach_group() will assign the blocking
domain and SMMUv3 will no longer hold a stale domain reference.
Fixes: 1ea2a07a53 ("iommu: Add DMA ownership management interfaces")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Tested-by: Baolu Lu <baolu.lu@linux.intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
--
Just minor polishing as discussed
v3:
- Change names to __iommu_group_set_domain() /
__iommu_group_set_core_domain()
- Clarify comments
- Call __iommu_group_set_domain() directly in
iommu_group_release_dma_owner() since we know it is always selecting
the default_domain
- Remove redundant detach_dev ops check in __iommu_detach_device and
make the added WARN_ON fail instead
- Check for blocking_domain in __iommu_attach_group() so VFIO can
actually attach a new group
- Update comments and spelling
- Fix missed change to new_domain in iommu_group_do_detach_device()
v2: https://lore.kernel.org/r/0-v2-f62259511ac0+6-iommu_dma_block_jgg@nvidia.com
v1: https://lore.kernel.org/r/0-v1-6e9d2d0a759d+11b-iommu_dma_block_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v3-db7f0785022b+149-iommu_dma_block_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using the legacy "mmu-masters" DT binding, we reject DMA domains
since we have no guarantee of driver probe order and thus can't rely on
client drivers getting the correct DMA ops. However, we can do better
than fall back to the old no-default-domain behaviour now, by forcing an
identity default domain instead. This also means that detaching from a
VFIO domain can actually work - that looks to have been broken for over
6 years, so clearly isn't something that legacy binding users care
about, but we may as well make the driver code make sense anyway.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9805e4c492cb972bdcdd57999d2d001a2d8b5aab.1652171938.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Allow the NVIDIA-specific ARM SMMU implementation to bind to the SMMU
instances found on Tegra234.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220429082243.496000-4-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the Qualcomm SC8280XP platform to the list of compatible for which
the Qualcomm-impl of the ARM SMMU should apply.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503163429.960998-3-bjorn.andersson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
We currently call arm64_mm_context_put() without holding a reference to
the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to
ensure the mm only gets freed after we unpinned the ASID.
Fixes: 32784a9562 ("iommu/arm-smmu-v3: Implement iommu_sva_bind/unbind()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20220426130444.300556-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220425114136.2649310-1-yangyingliang@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Groups created by VFIO backends outside the core IOMMU API should never
be passed directly into the API itself, however they still expose their
standard sysfs attributes, so we can still stumble across them that way.
Take care to consider those cases before jumping into our normal
assumptions of a fully-initialised core API group.
Fixes: 3f6634d997 ("iommu: Use right way to retrieve iommu_ops")
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {
The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).
To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.
Cc: stable@vger.kernel.org
Fixes: f78ebca8ff ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Enable the multi-bank functions for infra-iommu. We put PCIE in bank0
and USB in the last bank(bank4). and we don't use the other banks
currently, disable them.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-36-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Each bank has some independent registers. thus backup/restore them for
each a bank when suspend and resume.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-35-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The registers for each bank of the IOMMU base are in order, delta is
0x1000. Initialise the base for each bank.
For all the previous SoC, we only have bank0. thus use "do {} while()"
to allow bank0 always go.
When removing the device, Not always all the banks are initialised, it
depend on if there is masters for that bank.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-34-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We preassign some ports in a special bank via the new defined
banks_portmsk. Put it in the plat_data means it is not expected to be
adjusted dynamically.
If the iommu id in the iommu consumer's dtsi node is inside this
banks_portmsk, then we switch it to this special iommu bank, and
initialise the IOMMU bank HW.
Each bank has the independent pgtable(4GB iova range). Each bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-33-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for adding bankid, also no functional change.
In the previous SoC, each a iova_region is a domain; In the multi-banks
case, each a bank is a domain, then the original function name
"mtk_iommu_get_domain_id" is not proper. Use "iova_region_id" instead of
"domain_id".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-32-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The mt8195 IOMMU HW max support 5 banks, and regarding the banks'
registers, it looks like:
----------------------------------------
|bank0 | bank1 | bank2 | bank3 | bank4|
----------------------------------------
|global |
|control| null
|regs |
-----------------------------------------
|bank |bank |bank |bank |bank |
|regs |regs |regs |regs |regs |
| | | | | |
-----------------------------------------
Each bank has some special bank registers and it share bank0's global
control registers. this patch initialise the bank hw with the bankid.
In the hw_init, we always initialise bank0's control register since
we don't know if the bank0 is initialised.
Additionally, About each bank's register base, always delta 0x1000.
like bank[x + 1] = bank[x] + 0x1000.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-31-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for supporting multi-banks for the IOMMU HW, No functional change.
Add a new structure(mtk_iommu_bank_data) for each a bank. Each a bank have
the independent HW base/IRQ/tlb-range ops, and each a bank has its special
iommu-domain(independent pgtable), thus, also move the domain information
into it.
In previous SoC, we have only one bank which could be treated as bank0(
bankid always is 0 for the previous SoC).
After adding this structure, the tlb operations and irq could use
bank_data as parameter.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-30-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change. Just rename this for readable. Differentiate this
from mtk_iommu.c
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-29-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently there is a suspend structure in the header file. It's no need
to keep a header file only for this. Move these into the c file and rm
this header file.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-28-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for adding the structure "mtk_iommu_bank_data". No functional
change. The mtk_iommu_domain in v1 and v2 are different, we could not add
current data as bank[0] in v1 simplistically.
Currently we have no plan to add new SoC for v1, in order to avoid affect
v1 when we add many new features for v2, I totally separate v1 and v2 in
this patch, there are many structures only for v2.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-27-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change too, prepare for mt8195 IOMMU support bank functions.
Some global control settings are in bank0 while the other banks have
their bank independent setting. Here only move the global control
settings and the independent registers together.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-26-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change. Use "base" instead of the data->base. This is
avoid to touch too many lines in the next patches.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-25-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mt8195 has 3 IOMMU, containing 2 MM IOMMUs, one is for vdo, the other
is for vpp. and 1 INFRA IOMMU.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-24-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the code for of_iommu_configure_dev_id is like this:
static int of_iommu_configure_dev_id(struct device_node *master_np,
struct device *dev,
const u32 *id)
{
struct of_phandle_args iommu_spec = { .args_count = 1 };
err = of_map_id(master_np, *id, "iommu-map",
"iommu-map-mask", &iommu_spec.np,
iommu_spec.args);
...
}
It supports only one id output. BUT our PCIe HW has two ID(one is for
writing, the other is for reading). I'm not sure if we should change
of_map_id to support output MAX_PHANDLE_ARGS.
Here add the solution in ourselve drivers. If it's pcie case, enable one
more bit.
Not all infra iommu support PCIe, thus add a PCIe support flag here.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-23-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The infra iommu enable bits in mt8195 is in the pericfg register segment,
use regmap to update it.
If infra iommu master translation fault, It doesn't have the larbid/portid,
thus print out the whole register value.
Since regmap_update_bits may fail, add return value for mtk_iommu_config.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-22-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The power/clock of infra iommu is always on, and it doesn't have the
device link with the master devices, then the infra iommu device's PM
status is not active, thus we add A PM_CLK_AO flag for infra iommu.
The tlb operation is a bit not clear here, there are 2 special cases.
Comment them in the code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-21-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allow the type IOMMU_DOMAIN_UNMANAGED since vfio_iommu_type1.c always call
iommu_domain_alloc. The PCIe EP works ok when going through vfio.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-20-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For MM IOMMU, We always add device link between smi-common and IOMMU HW.
In mt8195, we add smi-sub-common. Thus, if the node is sub-common, we still
need find again to get smi-common, then do device link.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-19-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for supporting INFRA_IOMMU, and APU_IOMMU later.
For Infra IOMMU/APU IOMMU, it doesn't have the "larb""port". thus, Use
the MM flag contain the MM_IOMMU special flow, Also, it moves a big
chunk code about parsing the mediatek,larbs into a function, this is
only needed for MM IOMMU. and all the current SoC are MM_IOMMU.
The device link between iommu consumer device and smi-larb device only
is needed in MM iommu case.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-18-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
