Make CPU cluster's bandwidth (BW) request a multiple of MC channels.
CPU OPP tables have BW info per MC channel. But, the actual BW depends
on the number of MC channels which can change as per the boot config.
Get the number of MC channels which are actually enabled in current
boot configuration and multiply the BW request from a CPU cluster with
the number of enabled MC channels. This is not required to be done for
other MC clients.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add dummy memory controller clients to represent CPU clusters. They will
be used by the CPUFREQ driver to scale DRAM FREQ with the CPU FREQ.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add few isochronous (ISO) and non-ISO memory clients. ISO clients have
guaranteed bandwidth requirement. PCIe clients added to the memory
client table represent each controller in Tegra234.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Interconnect framework support to dynamically set the DRAM
bandwidth from different clients. Both the MC and EMC drivers are
added as ICC providers. The path for any request is:
MC-Client[1-n] -> MC -> EMC -> EMEM/DRAM
MC client's request for bandwidth will go to the MC driver which
passes the client request info like BPMP Client ID, Client type
and the Bandwidth to the BPMP-FW. The final DRAM freq to achieve
the requested bandwidth is set by the BPMP-FW based on the passed
parameters.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to the datasheets, the Strobe Timing Adjustment bit (STRTIM)
setting is different on R-Car SoCs, i.e.
R-Car M3 ES1.* : STRTIM[2:0] is set to 0x6
other R-Car Gen3: STRTIM[2:0] is set to 0x7
other R-Car Gen4: STRTIM[3:0] is set to 0xf
To fix this issue, a DT match data was added to specify the setting
for special use cases.
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
[wsa: rebased, restructured, added Gen4 support]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230419130234.44321-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The most notable updates this time are for Qualcomm Snapdragon platforms.
The Inline-Crypto-Engine gets a new DT binding and driver. A number of
drivers now support additional Snapdragon variants, in particular the
rsc, scm, geni, bwm, glink and socinfo, while the llcc (edac) and rpm
drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces.
-----BEGIN PGP SIGNATURE-----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=r6jm
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
When reading MR18 for Dev1 the code was incorrectly reading the
value corresponding to Dev0, so fix this by adjusting the index
according to the Tegra X1 TRM.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230322234050.47332-1-diogo.ivo@tecnico.ulisboa.pt
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5f ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5f ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 380def2d4c ("memory: tegra124: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.12
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 06f079816d ("memory: tegra-mc: Add interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144711.1543295-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Link: https://lore.kernel.org/r/20230308202117.426808-2-nick.alcock@oracle.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230308202117.426808-1-nick.alcock@oracle.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
The dummy cycles value was wrongly calculated if dummy.buswidth > 1,
which affects QSPI, OSPI, HyperFlash on various SoCs. We're lucky in
Single SPI case since its dummy.buswidth equals to 1, so the result of
the division is unchanged
This issue can be reproduced using something like the following commands
A. QSPI mode: Mount device with jffs2 format
jffs2: CLEANMARKER node found at 0x00000004, not first node in block (0x00000000)
B. QSPI mode: Write data to mtd10, where mtd10 is a parition on SPI Flash
storage, defined properly in a device tree
[Correct fragment, read from SPI Flash]
root@v3x:~# echo "hello" > /dev/mtd10
root@v3x:~# hexdump -C -n100 /dev/mtd10
00000000 68 65 6c 6c 6f 0a ff ff ff ff ff ff ff ff ff ff |hello...........|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
[Incorrect read of the same fragment: see the difference at offsets 0-3]
root@v3x:~# echo "hello" > /dev/mtd10
root@v3x:~# hexdump -C -n100 /dev/mtd10
00000000 00 00 00 00 68 65 6c 6c 6f 0a ff ff ff ff ff ff |....hello.......|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
As seen from the result, 4 NULL bytes were inserted before the test data.
Wrong calculation in rpcif_prepare() led to miss of some dummy cycle. A
division by bus width is redundant because it had been performed already
in spi-rpc-if.c::rpcif_spi_mem_prepare()
Fix this by removing the redundant division.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230112090655.43367-1-wsa+renesas@sang-engineering.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230207173051.449151-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Directly get the match data with device_get_match_data().
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211171939327684154@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Most rpcif_*() API functions do not need access to any other fields in
the rpcif structure than the device pointer. Simplify dependencies by
passing the device pointer instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/0460fe82ba348cedec7a9a75a8eff762c50e817b.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
rpcif_probe() already has a "dev" variable pointing to the right device
structure, so there is no need to take a detour through the platform
device.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/298009c43ad119703f564c0f1864743914b4beeb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
While the acquired resources are tied to the lifetime of the RPC-IF core
device (through the use of managed resource functions), the actual
resource acquisition is triggered from the HyperBus and SPI child
drivers. Due to this mismatch, unbinding and rebinding the child
drivers manually fails with -EBUSY:
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/unbind
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/bind
rpc-if ee200000.spi: can't request region for resource [mem 0xee200000-0xee2001ff]
rpc-if-hyperflash: probe of rpc-if-hyperflash failed with error -16
The same is true for rpc-if-spi.
Fix this by moving all resource acquisition to the core driver's probe
routine.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c1012ef1de799e08a70817ab7313794e2d8d7bfb.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The rpcif structure is used as a common data structure, shared by the
RPC-IF core driver and by the HyperBus and SPI child drivers.
This poses several problems:
- Most structure members describe private core driver state, which
should not be accessible by the child drivers,
- The structure's lifetime is controlled by the child drivers,
complicating use by the core driver.
Fix this by moving the private core driver state to its own structure,
managed by the RPC-IF core driver, and store it in the core driver's
private data field. This requires absorbing the child's platform
device, as that was stored in the driver's private data field before.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/09fbb6fa67d5a8cd48a08808c9afa2f6a499aa42.1669213027.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The clk_disable_unprepare() should be called in the error handling
of devbus_get_timing_params() and of_platform_populate(), fix it by
replacing devm_clk_get and clk_prepare_enable by devm_clk_get_enabled.
Fixes: e81b6abebc ("memory: add a driver for atmel ram controllers")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221126044911.7226-1-cuigaosheng1@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The clk_disable_unprepare() should be called in the error handling
of caps->has_mpddr_clk, fix it by replacing devm_clk_get and
clk_prepare_enable by devm_clk_get_enabled.
Fixes: e81b6abebc ("memory: add a driver for atmel ram controllers")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221125073757.3535219-1-cuigaosheng1@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On newer Tegra releases, early boot SID override programming and SID
override programming during resume is handled by bootloader.
In the function tegra186_mc_program_sid() which is getting removed, SID
override register of all clients is written without checking if secure
firmware has allowed write on it or not. If write is disabled by secure
firmware then it can lead to errors coming from secure firmware and hang
in kernel boot.
Also, SID override is programmed on-demand during probe_finalize() call
of IOMMU which is done in tegra186_mc_client_sid_override() in this same
file. This function does it correctly by checking if write is permitted
on SID override register. It also checks if SID override register is
already written with correct value and skips re-writing it in that case.
Fixes: 393d66fd2c ("memory: tegra: Implement SID override programming")
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221125040752.12627-1-amhetre@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This bug has been introduced after switching from -1 to UINT_MAX
for GPMC_WAITPIN_INVALID.
The bug leads to an error when the optional gpmc,wait-pin
dt-property is not used:
...
gpmc_cs_program_settings: invalid wait-pin (-1)
...
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Fixes: 8dd7e4af58 ("memory: omap-gpmc: fix coverity issue "Control flow issues"")
Acked-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221209112828.581491-1-benedikt.niedermayr@siemens.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer,
removal of lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
-----BEGIN PGP SIGNATURE-----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=1spR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
Initial accel subsystem support. There are no drivers yet, just the framework.
New driver:
- ofdrm - replacement for offb
fbdev:
- add support for nomodeset
fourcc:
- add Vivante tiled modifier
core:
- atomic-helpers: CRTC primary plane test fixes, fb access hooks
- connector: TV API consistency, cmdline parser improvements
- send connector hotplug on cleanup
- sort makefile objects
tests:
- sort kunit tests
- improve DP-MST tests
- add kunit helpers to create a device
sched:
- module param for scheduling policy
- refcounting fix
buddy:
- add back random seed log
ttm:
- convert ttm_resource to size_t
- optimize pool allocations
edid:
- HFVSDB parsing support fixes
- logging/debug improvements
- DSC quirks
dma-buf:
- Add unlocked vmap and attachment mapping
- move drivers to common locking convention
- locking improvements
firmware:
- new API for rPI firmware and vc4
xilinx:
- zynqmp: displayport bridge support
- dpsub fix
bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support, sync improvements
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- Jadard JD9365DA-H3
- NewVision NV3051D
amdgpu:
- DCN support on ARM
- DCN 2.1 secure display
- Sienna Cichlid mode2 reset fixes
- new GC 11.x firmware versions
- drop AMD specific DSC workarounds in favour of drm code
- clang warning fixes
- scheduler rework
- SR-IOV fixes
- GPUVM locking fixes
- fix memory leak in CS IOCTL error path
- flexible array updates
- enable new GC/PSP/SMU/NBIO IP
- GFX preemption support for gfx9
amdkfd:
- cache size fixes
- userptr fixes
- enable cooperative launch on gfx 10.3
- enable GC 11.0.4 KFD support
radeon:
- replace kmap with kmap_local_page
- ACPI ref count fix
- HDA audio notifier support
i915:
- DG2 enabled by default
- MTL enablement work
- hotplug refactoring
- VBT improvements
- Display and watermark refactoring
- ADL-P workaround
- temp disable runtime_pm for discrete-
- fix for A380 as a secondary GPU
- Wa_18017747507 for DG2
- CS timestamp support fixes for gen5 and earlier
- never purge busy TTM objects
- use i915_sg_dma_sizes for all backends
- demote GuC kernel contexts to normal priority
- gvt: refactor for new MDEV interface
- enable DC power states on eDP ports
- fix gen 2/3 workarounds
nouveau:
- fix page fault handling
- Ampere acceleration support
- driver stability improvements
- nva3 backlight support
msm:
- MSM_INFO_GET_FLAGS support
- DPU: XR30 and P010 image formats
- Qualcomm SM6115 support
- DSI PHY support for QCM2290
- HDMI: refactored dev init path
- remove exclusive-fence hack
- fix speed-bin detection
- enable clamp to idle on 7c3
- improved hangcheck detection
vmwgfx:
- fb and cursor refactoring
- convert to generic hashtable
- cursor improvements
etnaviv:
- hw workarounds
- softpin MMU fixes
ast:
- atomic gamma LUT support
- convert to SHMEM
lcdif:
- support YUV planes
- Increase DMA burst size
- FIFO threshold tuning
meson:
- fix return type of cvbs mode_valid
mgag200:
- fix PLL setup on some revisions
sun4i:
- A100 and D1 support
udl:
- modesetting improvements
- hot unplug support
vc4:
- support PAL-M
- fix regression preventing 4K @ 60Hz
- fix NULL ptr deref
v3d:
- switch to drm managed resources
renesas:
- RZ/G2L DSI support
- DU Kconfig cleanup
mediatek:
- fixup dpi and hdmi
- MT8188 dpi support
- MT8195 AFBC support
tegra:
- NVDEC hardware on Tegra234 SoC
hdlcd:
- switch to drm managed resources
ingenic:
- fix registration error path
hisilicon:
- convert to drm_mode_init
maildp:
- use managed resources
mtk:
- use drm_mode_init
rockchip:
- use drm_mode_copy
-----BEGIN PGP SIGNATURE-----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=pABG
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The biggest highlight is that the accel subsystem framework is merged.
Hopefully for 6.3 we will be able to line up a driver to use it.
In drivers land, i915 enables DG2 support by default now, and nouveau
has a big stability refactoring and initial ampere support, AMD
includes new hw IP support and should build on ARM again. There is
also an ofdrm driver to take over offb on platforms it's used.
Stuff outside my tree, the dma-buf patches hit a few places, the vc4
firmware changes also do, and i915 has some interactions with MEI for
discrete GPUs. I think all of those should have been acked/reviewed by
relevant parties.
New driver:
- ofdrm - replacement for offb
fbdev:
- add support for nomodeset
fourcc:
- add Vivante tiled modifier
core:
- atomic-helpers: CRTC primary plane test fixes, fb access hooks
- connector: TV API consistency, cmdline parser improvements
- send connector hotplug on cleanup
- sort makefile objects
tests:
- sort kunit tests
- improve DP-MST tests
- add kunit helpers to create a device
sched:
- module param for scheduling policy
- refcounting fix
buddy:
- add back random seed log
ttm:
- convert ttm_resource to size_t
- optimize pool allocations
edid:
- HFVSDB parsing support fixes
- logging/debug improvements
- DSC quirks
dma-buf:
- Add unlocked vmap and attachment mapping
- move drivers to common locking convention
- locking improvements
firmware:
- new API for rPI firmware and vc4
xilinx:
- zynqmp: displayport bridge support
- dpsub fix
bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support, sync improvements
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- Jadard JD9365DA-H3
- NewVision NV3051D
amdgpu:
- DCN support on ARM
- DCN 2.1 secure display
- Sienna Cichlid mode2 reset fixes
- new GC 11.x firmware versions
- drop AMD specific DSC workarounds in favour of drm code
- clang warning fixes
- scheduler rework
- SR-IOV fixes
- GPUVM locking fixes
- fix memory leak in CS IOCTL error path
- flexible array updates
- enable new GC/PSP/SMU/NBIO IP
- GFX preemption support for gfx9
amdkfd:
- cache size fixes
- userptr fixes
- enable cooperative launch on gfx 10.3
- enable GC 11.0.4 KFD support
radeon:
- replace kmap with kmap_local_page
- ACPI ref count fix
- HDA audio notifier support
i915:
- DG2 enabled by default
- MTL enablement work
- hotplug refactoring
- VBT improvements
- Display and watermark refactoring
- ADL-P workaround
- temp disable runtime_pm for discrete-
- fix for A380 as a secondary GPU
- Wa_18017747507 for DG2
- CS timestamp support fixes for gen5 and earlier
- never purge busy TTM objects
- use i915_sg_dma_sizes for all backends
- demote GuC kernel contexts to normal priority
- gvt: refactor for new MDEV interface
- enable DC power states on eDP ports
- fix gen 2/3 workarounds
nouveau:
- fix page fault handling
- Ampere acceleration support
- driver stability improvements
- nva3 backlight support
msm:
- MSM_INFO_GET_FLAGS support
- DPU: XR30 and P010 image formats
- Qualcomm SM6115 support
- DSI PHY support for QCM2290
- HDMI: refactored dev init path
- remove exclusive-fence hack
- fix speed-bin detection
- enable clamp to idle on 7c3
- improved hangcheck detection
vmwgfx:
- fb and cursor refactoring
- convert to generic hashtable
- cursor improvements
etnaviv:
- hw workarounds
- softpin MMU fixes
ast:
- atomic gamma LUT support
- convert to SHMEM
lcdif:
- support YUV planes
- Increase DMA burst size
- FIFO threshold tuning
meson:
- fix return type of cvbs mode_valid
mgag200:
- fix PLL setup on some revisions
sun4i:
- A100 and D1 support
udl:
- modesetting improvements
- hot unplug support
vc4:
- support PAL-M
- fix regression preventing 4K @ 60Hz
- fix NULL ptr deref
v3d:
- switch to drm managed resources
renesas:
- RZ/G2L DSI support
- DU Kconfig cleanup
mediatek:
- fixup dpi and hdmi
- MT8188 dpi support
- MT8195 AFBC support
tegra:
- NVDEC hardware on Tegra234 SoC
hdlcd:
- switch to drm managed resources
ingenic:
- fix registration error path
hisilicon:
- convert to drm_mode_init
maildp:
- use managed resources
mtk:
- use drm_mode_init
rockchip:
- use drm_mode_copy"
* tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits)
drm/amdgpu: fix mmhub register base coding error
drm/amdgpu: add tmz support for GC IP v11.0.4
drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4
drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4
drm/amdgpu: enable GFX IP v11.0.4 CG support
drm/amdgpu: Make amdgpu_ring_mux functions as static
drm/amdgpu: generally allow over-commit during BO allocation
drm/amd/display: fix array index out of bound error in DCN32 DML
drm/amd/display: 3.2.215
drm/amd/display: set optimized required for comp buf changes
drm/amd/display: Add debug option to skip PSR CRTC disable
drm/amd/display: correct DML calc error of UrgentLatency
drm/amd/display: correct static_screen_event_mask
drm/amd/display: Ensure commit_streams returns the DC return code
drm/amd/display: read invalid ddc pin status cause engine busy
drm/amd/display: Bypass DET swath fill check for max clocks
drm/amd/display: Disable uclk pstate for subvp pipes
drm/amd/display: Fix DCN2.1 default DSC clocks
drm/amd/display: Enable dp_hdmi21_pcon support
drm/amd/display: prevent seamless boot on displays that don't have the preferred dig
...
On Tegra234 NVDEC firmware is loaded from a secure carveout, where it
has been loaded by a bootloader. When booting NVDEC, we need to tell it
the address of this firmware, which we can determine by checking the
starting address of the carveout. As such, add an MC API to query the
bounds of carveouts, and add related information on Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some cleanups replace open-coded debugfs attributes and memory client
IDs are added for the DLA IP found on Tegra234 SoCs.
-----BEGIN PGP SIGNATURE-----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=OVih
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pL1m
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.2-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
memory: tegra: Changes for v6.2-rc1
Some cleanups replace open-coded debugfs attributes and memory client
IDs are added for the DLA IP found on Tegra234 SoCs.
* tag 'tegra-for-6.2-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add DLA clients for Tegra234
memory: tegra186-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra210-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra30-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
memory: tegra20-emc: Use DEFINE_SHOW_ATTRIBUTE to simplify code
dt-bindings: tegra: Update headers for Tegra234
dt-bindings: Add headers for NVDEC on Tegra234
Link: https://lore.kernel.org/r/20221121171239.2041835-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the memory clients on Tegra234 which are needed for initialising the
SMMU for the Deep Learning Accelerator (DLA).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No
functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Assign a big positive integer instead of an negative integer to an
u32 variable. Also remove the check for ">= 0" which doesn't make sense
for unsigned integers.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527139 ("Control flow issues")
Fixes: 89aed3cd5c ("memory: omap-gpmc: wait pin additions")
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20221109102454.174320-1-benedikt.niedermayr@siemens.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Similar to commit a6c30873ee ("ARM: 8989/1: use .fpu assembler
directives instead of assembler arguments").
GCC and GNU binutils support setting the "sub arch" via -march=,
-Wa,-march, target function attribute, and .arch assembler directive.
Clang was missing support for -Wa,-march=, but this was implemented in
clang-13.
The behavior of both GCC and Clang is to
prefer -Wa,-march= over -march= for assembler and assembler-with-cpp
sources, but Clang will warn about the -march= being unused.
clang: warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]
Since most assembler is non-conditionally assembled with one sub arch
(modulo arch/arm/delay-loop.S which conditionally is assembled as armv4
based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is
conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the
.arch assembler directive.
Add a few more instances found in compile testing as found by Arnd and
Nathan.
Link: 1d51c699b9
Link: https://bugs.llvm.org/show_bug.cgi?id=48894
Link: https://github.com/ClangBuiltLinux/linux/issues/1195
Link: https://github.com/ClangBuiltLinux/linux/issues/1315
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
This patch introduces support for setting the wait-pin polarity as well
as using the same wait-pin for different CS regions.
The waitpin polarity can be configured via the WAITPIN<X>POLARITY bits
in the GPMC_CONFIG register. This is currently not supported by the
driver. This patch adds support for setting the required register bits
with the "ti,wait-pin-polarity" dt-property.
The wait-pin can also be shared between different CS regions for special
usecases. Therefore GPMC must keep track of wait-pin allocations, so it
knows that either GPMC itself or another driver has the ownership.
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
Link: https://lore.kernel.org/r/20221102133047.1654449-2-benedikt.niedermayr@siemens.com
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The SPI Multi I/O Bus Controller (RPC-IF) on R-Car Gen4 SoCs is very
similar to the RPC-IF on R-Car Gen3 SoCs. It does support four instead
of three bits of strobe timing adjustment (STRTIM), and thus requires a
new mask and new settings.
Inspired by a patch in the BSP by Cong Dang.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/4d0824bf5ed0fb95c51cd36f9a3f0f562b1a6bf8.1665583089.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
According to the datasheet, HS bit should be specified to 1 when using
DMA transfer. As DMA transfer is not supported, it should be cleared to
0.
Previously, the driver relied on the HS bit being cleared by prior
firmware but this is not always the case.
Fix this by ensuring the bit is cleared during hardware initialization.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Cong Dang <cong.dang.xn@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/08d9fb10b3051decebf871267a6e2e7cb2d4faf9.1665583089.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add mt8188 smi common & larb support
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-5-chengci.xu@mediatek.com
For concerns about security, the register to enable/disable IOMMU of
SMI LARB should only be configured in secure world. Thus, we add some
SMC command for multimedia master to enable/disable MM IOMMU in ATF by
setting the register of SMI LARB. This function is prepared for MT8188.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-4-chengci.xu@mediatek.com
In MT8188, the register to enable/disable IOMMU can only be configured
in secure world by SMC call. We should add a return value for configure
port function for preparation because SMC call may return an error result.
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220817124608.10062-3-chengci.xu@mediatek.com
Add support for configuring the Self Refresh Power Down (SRPD)
inactivity timeout on Broadcom STB chips. This is used to conserve power
when the DRAM activity is reduced.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-4-f.fainelli@gmail.com
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes: 976897dd96 ("memory: Extend of_memory with LPDDR3 support")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-2-windhl@126.com
We should add the of_node_put() when breaking out of
for_each_child_of_node() as it will automatically increase
and decrease the refcount.
Fixes: e6b42eb6a6 ("memory: emif: add device tree support to emif driver")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719085640.1210583-1-windhl@126.com
The next generation (revision 1) of the DFL EMIF feature device requires
support for more than 4 memory banks. It does not support the selective
clearing of memory banks. A capability register replaces the previous
control register, and contains a bitmask to indicate the presence of each
memory bank. This bitmask aligns with the previous control register
bitmask that served the same purpose. The control and capability
registers are treated like a C Union structure in order to support both
the new and old revisions of the EMIF device.
Signed-off-by: Debarati Biswas <debaratix.biswas@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220713130355.196115-1-tianfei.zhang@intel.com
The break of for_each_available_child_of_node() needs a
corresponding of_node_put() when the reference 'child' is not
used anymore. Here we do not need to call of_node_put() in
fail path as '!match' means no break.
While the of_platform_device_create() will created a new
reference by 'child' but it has considered the refcounting.
Fixes: fee10bd226 ("memory: pl353: Add driver for arm pl353 static memory controller")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220716031324.447680-1-windhl@126.com
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski).
-----BEGIN PGP SIGNATURE-----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=LBb0
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li).
-----BEGIN PGP SIGNATURE-----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=NHBQ
-----END PGP SIGNATURE-----
Merge tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:
"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li)."
* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
Tegra234 has multiple network interfaces with each their own memory
clients and stream IDs to allow for proper isolation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that we have a central API to handle all OPP table configurations,
migrate the set-supported-hw family of helpers to use the new
infrastructure.
The return type and parameter to the APIs change a bit due to this,
update the current users as well in the same commit in order to avoid
breaking builds.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
This function doesn't call of_node_put() in some error paths.
To unify the structure, Add put_node label and goto it on errors.
Fixes: 6e7674c3c6 ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20220602041721.64348-1-linmq006@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling paths.
Fixes: 4740475770 ("memory: mtk-smi: Add device link for smi-sub-common")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601120118.60225-1-linmq006@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The MediaTek Helio X10 (MT6795) SoC has 5 LARBs and one common SMI
instance without any sub-common and without GALS.
While the smi-common configuration is specific to this SoC, on the
LARB side, this is similar to MT8173, in the sense that it doesn't
need the port in LARB, and the register layout is also compatible
with that one, which makes us able to fully reuse the smi-larb
platform data struct that was introduced for MT8173.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20220518091038.22380-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The Texas Instruments OMAP General Purpose Memory Controller (GPMC) is
only present on TI OMAP2/3/4/5, Keystone, AM33xx, AM43x, DRA7xx, TI81xx,
and K3 SoCs. Hence add a dependency on ARCH_OMAP2PLUS || ARCH_KEYSTONE
|| ARCH_K3, to prevent asking the user about this driver when
configuring a kernel without OMAP2+, Keystone, or K3 SoC family support.
Fixes: be34f45f0d ("memory: omap-gpmc: Make OMAP_GPMC config visible and selectable")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/f6780f572f882ed6ab5934321942cf2b412bf8d1.1652174849.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
Replace legacy pm_power_off with kernel_can_power_off() helper that
is aware about chained power-off handlers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for logging memory controller errors on Tegra186, Tegra194
and Tegra234. On these SoCs, interrupts can occur on multiple channels.
Add support required to read the status of interrupts across multiple
channels, log and clear them.
Also add new interrupts supported on these SoCs.
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220506132312.3910637-5-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
From Tegra186 onwards, the memory controller supports multiple channels.
Add support for mapping the address spaces of these channels and specify
the number of channels supported by Tegra186, Tegra194 and Tegra234.
In case of old bindings, channels won't be present. If channels are not
present then print a warning and continue so that backward compatibility
will be preserved in driver.
During error interrupts from memory controller, appropriate registers
from these channels need to be accessed for logging error info.
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220506132312.3910637-4-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the memory clients on Tegra234 which are needed for APE
DMA to properly use the SMMU.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220506132312.3910637-3-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The memory controller and external memory controller found on Tegra234
is similar to the version found on earlier SoCs but supports a number of
new memory clients.
Add initial memory client definitions for the Tegra234 so that the SMMU
stream ID override registers can be properly programmed at boot time.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220506132312.3910637-2-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
1. Cleanup: simplify platform_get_resource() calls by using
devm_platform_get_and_ioremap_resource() helper.
2. OMAP: allow building omap-gpmc as module and make it visible (it is
not selected by platform anymore).
-----BEGIN PGP SIGNATURE-----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=u7Y+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJxH7UACgkQmmx57+YA
GNlzTQ/+I2DaRUG1A/m/7wmbywFjv8zTEacLbCUwE7iSVMCMbxlNmjLTCup9haYH
/Lzt0Yaazs1gDf1EGxq9DT2KVoxTlwN7pt2rWYRHCzpwJXVqNiea2Chk1Ns/hULX
m5pNUhOgZ7pJtHdot7NbTjd9q7DHOrLo51In5uT1yGeHmQFDgkrwIwBswAAvjDuS
1GPa47WiCMiT89f0qEv1kFAUCD4b15qus8+4HeVUyVg5u7OEWQcGeK6bpJu6z1R8
Hg6Z7G0Faz0fR3wUTg7OiFnKrSpIzggFgyriv8wLZXzk6tzy19ZGTx0UmMF0b0lZ
78BXL0lTu9XJfrfxO8sIYFqvrcdjYIroE0EYTzzNCqtl+SjZMo41n6AQfeM8N52o
Fb1ISjewG31f3P/7eYQwUCw06O8QBsK001ADsOFJOGvWzIoT+Ak5OXvSwRb6tSGT
ZSXoBGNg4Ws7UVh4pey4U+vCIrbzm/XJ8PUNCy2sDdnMqoY61cq/8AP6P7nE+B/+
ch/Vww/DL34t5Tpno+jG7R3I14yvmS2YH7nGAyL+Kr8rhTLv08M663QtsIb0QlCt
cFrBY4h3hb6G+xL6WpKMULhL5d7ZmXWAmu+cjkgYb9Cxv/NDFWJ1sBuwl4FWrOO/
h2u12pWV0wQgDcsHXQC2LMyad75CBEj4KsfnuSWGdrjOeTGkT58=
=c7xR
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.19, part two
1. Cleanup: simplify platform_get_resource() calls by using
devm_platform_get_and_ioremap_resource() helper.
2. OMAP: allow building omap-gpmc as module and make it visible (it is
not selected by platform anymore).
* tag 'memory-controller-drv-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: omap-gpmc: Allow building as a module
memory: omap-gpmc: Make OMAP_GPMC config visible and selectable
memory: renesas-rpc-if: simplify platform_get_resource_byname()
memory: brcmstb_dpfe: simplify platform_get_resource_byname()
memory: tegra: mc: simplify platform_get_resource()
memory: ti-emif-pm: simplify platform_get_resource()
memory: ti-emif: simplify platform_get_resource()
memory: emif: simplify platform_get_resource()
memory: da8xx-ddrctl: simplify platform_get_resource()
Link: https://lore.kernel.org/r/20220503070652.54091-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allow OMAP_GPMC to be built as a module.
When building this driver as a module, the symbol
'of_default_bus_match_table' will not be found as it is not being
exported.
The of_match_node() call is redundant anyways as
of_platform_default_populate() already takes care of matching with
'of_default_bus_match_table'. So get rid of that call. This will also
resolve the module build failure.
Move compatible match table to the end where it is usually expected.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20220426082611.24427-3-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
So far for armv7 TI platforms, GPMC was being selected by
arch/arm/mach-* architecture Kconfig files.
For K3 platforms, GPMC is no longer required for basic boot and cannot
be always enabled by default by mach- Kconfig.
We need a way for user (or board defconfig) to enable it if required so
make OMAP_GPMC Kconfig option always visible.
Drop COMPILE_TEST as build fails if IRQ_DOMAIN is not enabled.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20220426082611.24427-2-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
HyperFlash devices fail to probe:
rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
from half of the transfer size, cfr. the rpcif_bits_set() helper
function. However, rpcif_reg_{read,write}() does not take the bus size
into account, and does not double all Manual Mode Data Register access
sizes when communicating with a HyperFlash or Octal-SPI Flash device.
Fix this, and avoid the back-and-forth conversion between transfer size
and Transfer Data Enable bits, by explicitly storing the transfer size
in struct rpcif, and using that value to determine access size in
rpcif_reg_{read,write}().
Enforce that the "high" Manual Mode Read/Write Data Registers
(SM[RW]DR1) are only used for 8-byte data accesses.
While at it, forbid writing to the Manual Mode Read Data Registers,
as they are read-only.
Fixes: fff53a551d ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.Make the
code simpler without functional changes.
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220418020147.2556925-1-lv.ruyi@zte.com.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
For manual write and read, factor out the common access to the first
data register by keeping track of the current data pointer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c3b2a8d1a69f1b1e8d1a460148406cfb83e52eb4.1649857740.git.geert+renesas@glider.be
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Commit 3e25f800af ("memory: fsl_ifc: populate child devices without
relying on simple-bus") was trying to replace the "simple-bus"
compatible with explicit bus populate in the driver. But
of_platform_populate() only populates child nodes of ifc without
populating child buses and child mfd devices residing under ifc. Change
it to of_platform_default_populate() to fix the problem.
Fixes: 3e25f800af ("memory: fsl_ifc: populate child devices without relying on simple-bus")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20220307204118.19093-1-leoyang.li@nxp.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
'dmc->counter' is a 'struct devfreq_event_dev **', so there is some
over memory allocation. 'counters_size' should be computed with
'sizeof(struct devfreq_event_dev *)'.
Use 'sizeof(*dmc->counter)' instead to fix it.
While at it, use devm_kcalloc() instead of devm_kzalloc()+open coded
multiplication.
Fixes: 6e7674c3c6 ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69d7e69346986e2fdb994d4382954c932f9f0993.1647760213.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 87108dc78e ("memory: atmel-ebi: Enable the SMC clock if specified")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220309110144.22412-1-linmq006@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Make sure to free the flash platform device in the event that
registration fails during probe.
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Cc: stable@vger.kernel.org # 5.8
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220303180632.3194-1-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
The pointer temp is allocated by devm_kzalloc(), so it should be
checked for error handling.
Fixes: 7ec944538d ("memory: emif: add basic infrastructure for EMIF driver")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.
Fixes: 68b4aee35d ("memory: emif: add interrupt and temperature handling")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
