[ Upstream commit f126fbadce ]
We register the platform device when driver inits. However, we do not
unregister it when driver exits.
To resolve this, we declare the platform data to be a global static
variable and rename it to be "cpufreq_pdev". With this global variable,
we can do platform_device_unregister() when driver exits.
Fixes: 501c574f4e ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
[ Viresh: Commit log and Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7070187c8 ]
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85f0e42bd6 ]
This reverts commit f346e96267.
The commit tried to fix a possible real bug but it made it even worse.
The fix was simply buggy as now an error out to out_offline_policy or
out_exit_policy will try to release a semaphore which was never taken in
the first place. This works fine only if we failed late, i.e. via
out_destroy_policy.
Fixes: f346e96267 ("cpufreq: Fix possible race in cpufreq online error path")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f346e96267 ]
When cpufreq online fails, the policy->cpus mask is not cleared and
policy->rwsem is released too early, so the driver can be invoked
via the cpuinfo_cur_freq sysfs attribute while its ->offline() or
->exit() callbacks are being run.
Take policy->clk as an example:
static int cpufreq_online(unsigned int cpu)
{
...
// policy->cpus != 0 at this time
down_write(&policy->rwsem);
ret = cpufreq_add_dev_interface(policy);
up_write(&policy->rwsem);
return 0;
out_destroy_policy:
for_each_cpu(j, policy->real_cpus)
remove_cpu_dev_symlink(policy, get_cpu_device(j));
up_write(&policy->rwsem);
...
out_exit_policy:
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
clk_put(policy->clk);
// policy->clk is a wild pointer
...
^
|
Another process access
__cpufreq_get
cpufreq_verify_current_freq
cpufreq_generic_get
// acces wild pointer of policy->clk;
|
|
out_offline_policy: |
cpufreq_policy_free(policy); |
// deleted here, and will wait for no body reference
cpufreq_policy_put_kobj(policy);
}
Address this by modifying cpufreq_online() to release policy->rwsem
in the error path after the driver callbacks have run and to clear
policy->cpus before releasing the semaphore.
Fixes: 7106e02bae ("cpufreq: release policy->rwsem on error")
Signed-off-by: Schspa Shi <schspa@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f55ae08c89 ]
For some platforms, the frequency returned by hardware may be slightly
different from what is provided in the frequency table. For example,
hardware may return 499 MHz instead of 500 MHz. In such cases it is
better to avoid getting into unnecessary frequency updates, as we may
end up switching policy->cur between the two and sending unnecessary
pre/post update notifications, etc.
This patch has chosen allows the hardware frequency and table frequency
to deviate by 1 MHz for now, we may want to increase it a bit later on
if someone still complains.
Reported-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Jia-wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4e6448638 ]
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f84ccad5f5 ]
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is
obtained from another register REG_DOMAIN_STATE, thus the helper function
qcom_lmh_get_throttle_freq() should be modified accordingly, as for now
it returns gibberish since .reg_current_vote is unset for EPSS hardware.
To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate
in KHz.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 03c83982a0 upstream.
On systems with overclocking enabled, CPPC Highest Performance can be
hard coded to 0xff. In this case even if we have cores with different
highest performance, ITMT can't be enabled as the current implementation
depends on CPPC Highest Performance.
On such systems we can use MSR_HWP_CAPABILITIES maximum performance field
when CPPC.Highest Performance is 0xff.
Due to legacy reasons, we can't solely depend on MSR_HWP_CAPABILITIES as
in some older systems CPPC Highest Performance is the only way to identify
different performing cores.
Reported-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Michael Larabel <Michael@MichaelLarabel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec1c7ad476 ]
CPUfreq governors request CPU frequencies using information
on current CPU usage. The CPPC driver converts them to
performance requests. Frequency targets are computed as:
target_freq = (util / cpu_capacity) * max_freq
target_freq is then clamped between [policy->min, policy->max].
The CPPC driver converts performance values to frequencies
(and vice-versa) using cppc_cpufreq_perf_to_khz() and
cppc_cpufreq_khz_to_perf(). These functions both use two different
factors depending on the range of the input value. For
cppc_cpufreq_khz_to_perf():
- (NOMINAL_PERF / NOMINAL_FREQ) or
- (LOWEST_PERF / LOWEST_FREQ)
and for cppc_cpufreq_perf_to_khz():
- (NOMINAL_FREQ / NOMINAL_PERF) or
- ((NOMINAL_PERF - LOWEST_FREQ) / (NOMINAL_PERF - LOWEST_PERF))
This means:
1- the functions are not inverse for some values:
(perf_to_khz(khz_to_perf(x)) != x)
2- cppc_cpufreq_perf_to_khz(LOWEST_PERF) can sometimes give
a different value from LOWEST_FREQ due to integer approximation
3- it is implied that performance and frequency are proportional
(NOMINAL_FREQ / NOMINAL_PERF) == (LOWEST_PERF / LOWEST_FREQ)
This patch changes the conversion functions to an affine function.
This fixes the 3 points above.
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a8a77abf0 ]
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 521223d8b3 ]
The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.
To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0e27c3d4e ]
Re-enabling an interrupt from its own interrupt handler may cause
an interrupt storm, if there is a pending interrupt and because its
handling is disabled due to already done entrance into the handler
above in the stack.
Also, apparently it is improper to lock a mutex in an interrupt contex.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93d9e6f93e ]
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data). This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.
Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when there is throttling
or throttling is removed.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2c1b5a8466 upstream.
When I hot added a CPU, I found 'cpufreq' directory was not created
below /sys/devices/system/cpu/cpuX/.
It is because get_cpu_device() failed in add_cpu_dev_symlink().
cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface.
It will be called when the CPU device registered into the system.
The call chain is as follows:
register_cpu()
->device_register()
->device_add()
->bus_probe_device()
->cpufreq_add_dev()
But only after the CPU device has been registered, we can get the
CPU device by get_cpu_device(), otherwise it will return NULL.
Since we already have the CPU device in cpufreq_add_dev(), pass
it to add_cpu_dev_symlink().
I noticed that the 'kobj' of the CPU device has been added into
the system before cpufreq_add_dev().
Fixes: 2f0ba790df ("cpufreq: Fix creation of symbolic links to policy directories")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd23f02f16 ]
Commit fbdc21e9b0 ("cpufreq: intel_pstate: Add Icelake servers
support in no-HWP mode") enabled the use of Intel P-State driver
for Ice Lake servers.
But it doesn't cover the case when OS can't control P-States.
Therefore, for Ice Lake server, if MSR_MISC_PWR_MGMT bits 8 or 18
are enabled, then the Intel P-State driver should exit as OS can't
control P-States.
Fixes: fbdc21e9b0 ("cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ed38eb49d1 upstream.
After commit 4adcf2e582 ("cpufreq: intel_pstate: Add ->offline and
->online callbacks") the EPP value set by the "performance" scaling
algorithm in the active mode is not restored after an offline/online
cycle which replaces it with the saved EPP value coming from user
space.
Address this issue by forcing intel_pstate_hwp_set() to set a new
EPP value when it runs first time after online.
Fixes: 4adcf2e582 ("cpufreq: intel_pstate: Add ->offline and ->online callbacks")
Link: https://lore.kernel.org/linux-pm/adc7132c8655bd4d1c8b6129578e931a14fe1db2.camel@linux.intel.com/
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dbea75fe18 ]
Commit a365ab6b9d ("cpufreq: intel_pstate: Implement the
->adjust_perf() callback") caused intel_pstate to use nonzero HWP
desired values in certain usage scenarios, but it did not prevent
them from being leaked into the confugirations in which HWP desired
is expected to be 0.
The failing scenarios are switching the driver from the passive
mode to the active mode and starting a new kernel via kexec() while
intel_pstate is running in the passive mode.
To address this issue, ensure that HWP desired will be cleared on
offline and suspend/shutdown.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c72bcf0ab8 ]
Fix a problem in active mode that cpu->pstate.turbo_freq is initialized
only if HWP-to-frequency scaling factor is refined.
In passive mode, this problem is not exposed, because
cpu->pstate.turbo_freq is set again, later in
intel_cpufreq_cpu_init()->intel_pstate_get_hwp_cap().
Fixes: eb3693f052 ("cpufreq: intel_pstate: hybrid: CPU-specific scaling factor")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1517176906 ]
When applying the policy min/max limits, the requested frequency is
simply clamped to not be out of range. It means, however, if one of the
boundaries isn't an available frequency, the frequency resolution can
return a value out of those limits, depending on the relation used.
e.g. freq{0,1,2} being available frequencies.
freq0 policy->min freq1 policy->max freq2
| | | | |
17kHz 18kHz 19kHz 20kHz 21kHz
__resolve_freq(21kHz, CPUFREQ_RELATION_L) -> 21kHz (out of bounds)
__resolve_freq(17kHz, CPUFREQ_RELATION_H) -> 17kHz (out of bounds)
If, during the policy init, we resolve the requested min/max to existing
frequencies, we ensure that any CPUFREQ_RELATION_* would resolve to a
frequency which is inside the policy min/max range.
Making the policy limits rigid helps to introduce the inefficient
frequencies support. Resolving an inefficient frequency to an efficient
one should not transgress policy->max (which can be set for thermal
reason) and having a value we can trust simplify this comparison.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts
to access memory associated with a kobject after calling
kobject_put() on it (James Morse).
-----BEGIN PGP SIGNATURE-----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=ytGW
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the intel_pstate driver and one
in the core.
Specifics:
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts to
access memory associated with a kobject after calling kobject_put()
on it (James Morse)"
* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
Since commit e5c6b312ce ("cpufreq: schedutil: Use kobject release()
method to free sugov_tunables") kobject_put() has kfree()d the
attr_set before gov_attr_set_put() returns.
kobject_put() isn't the last user of attr_set in gov_attr_set_put(),
the subsequent mutex_destroy() triggers a use-after-free:
| BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60
| Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20
|
| CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
| Platform, BIOS EDK II Jul 30 2018
| Call trace:
| dump_backtrace+0x0/0x380
| show_stack+0x1c/0x30
| dump_stack_lvl+0x8c/0xb8
| print_address_description.constprop.0+0x74/0x2b8
| kasan_report+0x1f4/0x210
| kasan_check_range+0xfc/0x1a4
| __kasan_check_read+0x38/0x60
| mutex_is_locked+0x20/0x60
| mutex_destroy+0x80/0x100
| gov_attr_set_put+0xfc/0x150
| sugov_exit+0x78/0x190
| cpufreq_offline.isra.0+0x2c0/0x660
| cpuhp_cpufreq_offline+0x14/0x24
| cpuhp_invoke_callback+0x430/0x6d0
| cpuhp_thread_fun+0x1b0/0x624
| smpboot_thread_fn+0x5e0/0xa6c
| kthread+0x3a0/0x450
| ret_from_fork+0x10/0x20
Swap the order of the calls.
Fixes: e5c6b312ce ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables")
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If HWP has been already been enabled by BIOS, it may be
necessary to override some kernel command line parameters.
Once it has been enabled it requires a reset to be disabled.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register
with the Energy Model in a consistent way and make several
drivers use it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because
the notification in question is triggered prematurely on some
systems (Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while
at it (Rob Herring).
-----BEGIN PGP SIGNATURE-----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=WSpr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
The current HWP calibration for hybrid processors in intel_pstate is
fragile, because it depends too much on the information provided by
the platform firmware via CPPC which may not be reliable enough. It
also need not be so complicated.
In order to improve that mechanism and make it more resistant to
platform firmware issues, make it only use the CPPC nominal_perf
values to compute the HWP-to-frequency scaling factors for all
CPUs and possibly use the HWP_CAP highest_perf values to recompute
them if the ones derived from the CPPC nominal_perf values alone
appear to be too high.
Namely, fetch CPC.nominal_perf for all CPUs present in the system,
find the minimum one and use it as a reference for computing all of
the CPUs' scaling factors (using the observation that for the CPUs
having the minimum CPC.nominal_perf the HWP range of available
performance levels should be the same as the range of available
"legacy" P-states and so the HWP-to-frequency scaling factor for
them should be the same as the corresponding scaling factor used
for representing the P-state values in kHz).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar:
"This adds a new cpufreq driver for Mediatek, which had been going
through reviews since last one year."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
Revert commit d0e936adbd ("cpufreq: intel_pstate: Process HWP
Guaranteed change notification"), because it causes a NULL pointer
dereference to occur on Lenovo X1 gen9 laptops due to an HWP
guaranteed performance change interrupt arriving prematurely.
This feature will be revisited in the next cycle.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce cpufreq HW driver which can support
CPU frequency adjust in MT6779 platform.
Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
[ Viresh: Massaged the patch and cleaned some stuff. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
This isn't used anymore, get rid of it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ->ready() callback is going away and since we don't do any important
stuff in sh_cpufreq_cpu_ready(), remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ready() callback was implemented earlier for acpi-cpufreq driver as
we wanted to use policy->cpuinfo.max_freq for which the policy was
required to be verified.
That is no longer the case and we can do the pr_warn() right from
->init() callback now. Remove acpi_cpufreq_cpu_ready().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq driver changes for v5.15 from Viresh Kumar:
"This contains:
- Update cpufreq-dt blocklist with more platforms (Bjorn Andersson).
- Allow freq changes from any CPU for qcom-hw driver (Taniya Das).
- Add DSVS interrupt's support for qcom-hw driver (Thara Gopinath).
- A new callback (->register_em()) to register EM at a more convenient
point of time."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
cpufreq: dt: Use .register_em() to register with energy model
cpufreq: Add callback to register with energy model
cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
As remote cpufreq updates are supported on QCOM platforms, set
dvfs_possible_from_any_cpu cpufreq driver flag.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm sa8155p, sm6350, sm8250 and sm8350 platforms also uses the
qcom-cpufreq-hw driver, so add them to the cpufreq-dt-platdev driver's
blocklist.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add interrupt support to notify the kernel of h/w initiated frequency
throttling by LMh. Convey this to scheduler via thermal presssure
interface.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
[Viresh: Added changes for arch_topology.c to fix build errors ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Set the newly added .register_em() callback to register with the EM
after the cpufreq policy is properly initialized.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It is possible that HWP guaranteed ratio is changed in response to
change in power and thermal limits. For example when Intel Speed Select
performance profile is changed or there is change in TDP, hardware can
send notifications. It is possible that the guaranteed ratio is
increased. This creates an issue when turbo is disabled, as the old
limits set in MSR_HWP_REQUEST are still lower and hardware will clip
to older limits.
This change enables HWP interrupt and process HWP interrupts. When
guaranteed is changed, calls cpufreq_update_policy() so that driver
callbacks are called to update to new HWP limits. This callback
is called from a delayed workqueue of 10ms to avoid frequent updates.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq fixes for v5.14 from Viresh Kumar:
"This contains:
- Addition of SoCs to blocklist for cpufreq-dt driver (Bjorn Andersson
and Thara Gopinath).
- Fix error path for scmi driver (Lukasz Luba).
- Temporarily disable highest frequency for armada, its unsafe and
breaks stuff."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev
cpufreq: arm_scmi: Fix error path when allocation failed
cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev
In the numa=off kernel command-line configuration init_chip_info() loops
around the number of chips and attempts to copy the cpumask of that node
which is NULL for all iterations after the first chip.
Hence, store the cpu mask for each chip instead of derving cpumask from
node while populating the "chips" struct array and copy that to the
chips[i].mask
Fixes: 053819e0bf ("cpufreq: powernv: Handle throttling due to Pmax capping at chip level")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
[mpe: Rename goto label to out_free_chip_cpu_mask]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210728120500.87549-2-psampat@linux.ibm.com
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Set the newly added .register_em() callback with
cpufreq_register_em_with_opp() to register with the EM core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
