There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.
Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.
This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d63042a ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:
In file included from include/linux/device.h:15,
from include/linux/pci.h:37,
from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
254 | atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
| ^~~~~~~~
The print message does not seem essential, so the easiest workaround is
to just remove it.
Fixes: c39dc15191 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
(cherry picked from commit 1470acbef1)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver
-----BEGIN PGP SIGNATURE-----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=l79u
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=0iVF
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts. Unmasking global interrupts will re-trigger MSI for any
pending interrupts.
Lack of this sequence will cause the driver to miss any
VPUIP interrupt that comes after reading VPU_37XX_HOST_SS_ICB_STATUS_0
and before clearing all active interrupt sources.
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024161952.759914-1-stanislaw.gruszka@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The work items listed in the TODO file of this driver file are either
completed or dropped. The file is no more significant according
to the maintainers. Hence removing it from the sources.
Suggested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTAucrOT69/tQK2o@runicha.com
Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC
message. This will make reading logs and debugging IPC issues easier.
Co-developed-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-5-stanislaw.gruszka@linux.intel.com
Do not unnecessarily wake up device to read clock rate.
Return 0 as clk_rate if device is suspended.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-4-stanislaw.gruszka@linux.intel.com
Remove two out of four _POLL macros. For two remaining _POLL
macros add message about polling register start and finish.
Additionally avoid inconsequence when using REGV_WR/RD macros in
MMU code - passing raw register offset instead of register name.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-3-stanislaw.gruszka@linux.intel.com
Quite often during test corner cases IPC, JSM functions can flood
dmesg with warn or err messages. With that lost dmesg history.
Change warn, err to ratelimited versions in IPC, JSM to suppress
dmesg spam occurrence during fail test scenarios.
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-2-stanislaw.gruszka@linux.intel.com
Allow to use whole address range in MMU context mmap which is up to 48
bits. Return invalid argument from MMU context mmap in case address is
not aligned to MMU page size, address is below MMU page size or address
is greater then 47 bits.
This fixes problem disallowing to run large models on VPU4
Signed-off-by: Wludzik, Jozef <jozef.wludzik@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018110113.547208-1-stanislaw.gruszka@linux.intel.com
This reverts commit 645d694559.
The commit cause issues with memory access from the device side.
Switch back to write-combined memory mappings until the issues
will be properly addressed.
Add extra wmb() needed when boot_params->save_restore_ret_address() is
modified.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231017121353.532466-1-stanislaw.gruszka@linux.intel.com
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
=2ien
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-10-10' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.7.
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
# 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
# VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
# YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
# L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
# 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
# Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
# =2ien
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZSUfiX4J7v4Wn0cU@ogabbay-vm-u22.habana-labs.com
Use:
- ivpu_bo_vaddr(bo) instead of bo->kvaddr
- ivpu_bo_size(bo) instead of bo->base.size
This is a preparation for switch to a drm_gem_shmem_object as a base for
ivpu_bo, where:
- bo->kvaddr becomes bo->base.vaddr
- bo->base.size becomes bo->base.base.size
Using ivpu_bo_vaddr() and ivpu_bo_size() increases the readability of
the code.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-9-stanislaw.gruszka@linux.intel.com
event_types_num received from the user can be 0. In that case, the
event_mask should be 0.
In addition, to create a correct mask we need to match the number
of event types to the bit location such that bit 0 represents a single
event type, bit 1 represents 2 types and so on.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Non-completed transactions from PCIe towards the device are handled by
the AXI drain mechanism. This handling is in the PCIe level, but the
transactions are still there in the device consuming some queues
entries, and therefore the device must be reset.
Modify to perform hard-reset upon PCIe AXI drain events.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The decoder interrupts are handled in the interrupt context
same as all user interrupts.
In such case, the wait list should be protected by
spin_lock_irqsave in order to avoid deadlock that might happen
with the user submission flow.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The function does not pin the pages so remove that from the inline doc.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Two function stubs were removed in an earlier commit but are now needed
again:
drivers/accel/habanalabs/common/device.c: In function 'hl_device_init':
drivers/accel/habanalabs/common/device.c:2231:14: error: implicit declaration of function 'hl_debugfs_device_init'; did you mean 'drm_debugfs_dev_init'? [-Werror=implicit-function-declaration]
2231 | rc = hl_debugfs_device_init(hdev);
drivers/accel/habanalabs/common/device.c:2367:9: error: implicit declaration of function 'hl_debugfs_device_fini'; did you mean 'hl_debugfs_remove_file'? [-Werror=implicit-function-declaration]
2367 | hl_debugfs_device_fini(hdev);
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This code was added as part of a bigger feature which was never
upstreamed, so remove this code.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Notifies the user which device was removed. It is important in
a server with multiple devices.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
flags in struct wait_interrupt_data is not used anywhere so remove it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Traces the DMA [un]map_sgtable using the new traces we added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
asic_dma_{un}map_single() asic-specific functions are no longer called
from the common code, so delete these functions.
In addition, delete the gaudi2 implementation as they are also not
called.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
There are cases such when FW runs MBIST, that preboot is expected to take
longer than the usual. In such cases the firmware reports status
SECURITY_READY/IN_PREBOOT and we extend the timeout waiting for it.
This is currently implemented for Gaudi2 only.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add debug prints to dump the content of the SG table which is prepared
when the dma-buf map op is called.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
On devices with virtual device memory (Gaudi2 onwards), user can provide
an offset within an allocated device memory from which he wants to
export a dma-buf object.
The offset value is verified by driver, but it is not taken into
consideration when the importer driver maps the dma-buf and the SG table
it prepared.
Add the missing offset handling.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The device_address member of 'struct hl_dmabuf_priv' is used only when
virtual device memory is not supported and dma-buf is exported from
address.
Set the value of this field only when it is relevant, and add "phys" to
its name so it would be clearer that it can't be a device virtual
address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In some cases the calculated number of required entries for the dma-buf
SG table is wrong. For example, if the page size is larger than both the
dma max segment size of the importer device and from the exported side,
or if the exported size is part of a phys_pg_pack that is composed of
several pages.
In these cases, redundant entries will be added to the SG table.
Modify the method that the number of entries is calculated, and the way
they are prepared.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently driver maintain one list for both pending user interrupts
which seeks to wait till CQ reaches it's target value and also the ones
that seeks to get timestamp records when the CQ reaches it's target
value.
This causes delay in handling the waiters which gets higher priority
than the timestamp records.
In order to solve this, let's split the list into two,
one for each case and each one is protected by it's own spinlock.
Waiters will be handled within the interrupt context first,
then the timestamp records will be set.
Freeing the timestamp related memory will be handled in a workqueue.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently we use dynamic allocation inside the irq handler
in order to allocate free node to be used for the free jobs.
This operation is expensive, especially when we deal with large
burst of events records that get released at the same time.
The alternative is to have pre allocated pool of free nodes
and just fetch nodes from this pool at irq handling time instead
of allocating them.
In case the pool becomes full, then the driver will fallback to
dynamic allocations.
As part of the optimization also update the unregister flow
upon re-using a timestamp record, by making the operation much
simpler and quicker. We already have the record in the registration
flow and now we just seek to re-use with different interrupt.
Therefore, no need to look for buffer according to the user handle.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is a potential race between user thread seeking to re-use
a timestamp record with new interrupt id, while this record is still
in the middle of interrupt handling and it is about to be freed.
Imagine the driver set the record in_use to 0 and only then fill the
free_node information. This might lead to unpleasant scenario where
the new registration thread detects the record as free to use, and
change the cq buff address. That will cause the free_node to get
the wrong buffer address to put refcount to.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
alloc_sgt_from_device_pages() includes relatively many parameters, and
in a subsequent change another offset parameter is going to be added.
Using structure fields directly when calling this function, and in
hl_map_dmabuf() it is done twice, makes it a little bit difficult to
understand the meaning of the parameters.
To make it clearer, assign the required values into local variables with
explicit names, and use the variables when calling the function.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
It is currently allowed for a user to export dma-buf with size and
offset that are not multiples of PAGE_SIZE.
The exported memory is mapped for the importer device, and there it will
be rounded to PAGE_SIZE, leading to actually exporting more than the
user intended to.
To make the user be aware of it, accept only size and offset which are
multiple of PAGE_SIZE.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The 'exported_size' member in 'struct hl_vm_phys_pg_pack' is used to
keep the exported dma-buf size, to be later used when the buffer is
mapped.
However it is possible that the same phys_pg_pack will be exported more
than once, and independently of when the mapping takes place.
Remove this member from the phys_pg_pack structure, and simply use the
size in the dma-buf object as the exported size when mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For Gaudi1 the exported dma-buf is always composed of a single page, and
therefore the exported size is equal to this page's size.
When calling alloc_sgt_from_device_pages(), we pass 0 as the exported
size and internally calculate it as "number of pages * page size".
This makes alloc_sgt_from_device_pages() less clear, because the
exported size parameter is not understood as a restriction on the pages'
size.
Modify to always pass the exported size explicitly.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After the heartbeat mechanism is now expanded to be used also
for EQ health check, we shouldn't send heartbeat messages
to FW before driver allow events to be received from FW.
Because if the driver will send two heartbeats before it enables
events to be received from FW, then the EQ health check
will fail and reset the device.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is the second patch for applying the eq health check mechanism
which will add support for the interrupt flow for gaudi2 asic.
More info about the interrupt mechanism:
set a dedicated msix for the eq error interrupt, and add
interrupt handler for it.
when FW detects some issue with EQ like EQ_FULL, it'll
raise that interrupt and driver should reset the device.
Driver will inform the FW which msix index to use through
the already existing handshake mechanism which will
send msix info message to fw.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add mechanism for fw eq health check. this will be done using two flows:
using the heartbeat mechanism and raising a dedicated interrupt to
indicate an eq failure like EQ full.
This patch will add implementation for the eq heartbeat for gaudi2 asic.
More info about the heartbeat mechanism:
Expand the heartbeat mechanism to monitor a new event that
will be sent from FW upon receiving heartbeat message.
that way driver can know that the eq is working or not.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Jacek Lawrynowicz