The pci_physfn() helper exists to support cases where the physfn
field may not be compiled into the pci_dev structure. We've
declared this driver dependent on PCI_IOV to avoid this problem,
but regardless we should follow the precedent not to access this
field directly.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230914021332.1929155-1-oushixiong@kylinos.cn
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If PCI_ATS isn't set, then pdev->physfn is not defined.
it causes a compilation issue:
../drivers/vfio/pci/pds/vfio_dev.c:165:30: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’?
165 | __func__, pci_dev_id(pdev->physfn), pci_id, vf_id,
| ^~~~~~
So adding PCI_IOV depends to select PCI_ATS.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230906014942.1658769-1-oushixiong@kylinos.cn
Fixes: 63f77a7161 ("vfio/pds: register with the pds_core PF")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This includes a shared branch with VFIO:
- Enhance VFIO_DEVICE_GET_PCI_HOT_RESET_INFO so it can work with iommufd
FDs, not just group FDs. This removes the last place in the uAPI that
required the group fd.
- Give VFIO a new device node /dev/vfio/devices/vfioX (the so called cdev
node) which is very similar to the FD from VFIO_GROUP_GET_DEVICE_FD.
The cdev is associated with the struct device that the VFIO driver is
bound to and shows up in sysfs in the normal way.
- Add a cdev IOCTL VFIO_DEVICE_BIND_IOMMUFD which allows a newly opened
/dev/vfio/devices/vfioX to be associated with an IOMMUFD, this replaces
the VFIO_GROUP_SET_CONTAINER flow.
- Add cdev IOCTLs VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT to allow the IOMMU
translation the vfio_device is associated with to be changed. This is a
significant new feature for VFIO as previously each vfio_device was
fixed to a single translation.
The translation is under the control of iommufd, so it can be any of
the different translation modes that iommufd is learning to create.
At this point VFIO has compilation options to remove the legacy interfaces
and in modern mode it behaves like a normal driver subsystem. The
/dev/vfio/iommu and /dev/vfio/groupX nodes are not present and each
vfio_device only has a /dev/vfio/devices/vfioX cdev node that represents
the device.
On top of this is built some of the new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that hold
the translation mapping. This is the basic functionality for the
normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors when
emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW that
owns a VFIO device. This includes support for the Intel iommu, and
patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kapis iommufd_ctx_has_group(), iommufd_device_to_ictx(),
iommufd_device_to_id(), iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some per-group
data
- Reorganize how the internal hwpt allocation flows to have more robust
locking
- Improve the access interfaces to support detach and replace of an IOAS
from an access
- New selftests and a rework of how the selftests creates a mock iommu
driver to be more like a real iommu driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZO/QDQAKCRCFwuHvBreF
YZ2iAP4hNEF6MJLRI2A28V3I/80f3x9Ed3Cirp/Q8ZdVEE+HYQD8DFaafJ0y3iPQ
5mxD4ZrZ9KfUns/gUqCT5oPHjrcvSAM=
=EQCw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmTvnDUbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsimEEP/AzG+VRcu5LfYbLGLe0z
zB8ts6G7S78wXlmfN/LYi3v92XWvMMcm+vYF8oNAMfr1YL5sibWN6UtQfY1KCr7h
nWKdQdqjajJ5yDDZnOFdhqHJGNfmZw6+fey8Z0j8zRI2oymK4DncWWX3g/7L1SNr
9tIexGJef+mOdAmC94yOut3YviAaZ+f95T/xrdXHzzoNr50DD0+PD6AJdKJfKggP
vhiC/DAYH3Fofaa6tRasgWuKCYWdjZLR/kxgNpeEmW6kZnbq/dnzZ+kgn4HH1f9G
8p7UKVARR6FfG5aLheWu6Y9PDaKnfnqu8y/hobuE/ivXcmqqK+a6xSxrjgbVs8WJ
94SYnTBRoTlDJaKWa7GxqdgzJnV+s5ZyAgPhjzdi6mLTPWGzkuLhFWGtYL+LZAQ6
pNeZSM6CFBk+bva/xT0nNPCXxPh+/j/Y0G18FREj8aPFc03HrJQqz0RLydvTnoDz
nX/by5KdzMSVSVLPr4uDMtAsgxsGqWiFcp7QMw1HhhlLWxqmYbA+mLZaqyMZUUOx
6b/P8WXT9P2I+qPVKWQ5CWyqpsEqm6P+72yg6LOM9kINvgwDhOa7cagMXIuMWYMH
Rf97FL+K8p1eIy6AnvRHgFBMM5185uG+0YcJyVqtucDr/k8T/Om6ujAI6JbWtNe6
cLgaVAqKOYqCR4HC9bfVGSbd
=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
Commit bb500dbe2a ("vfio/pds: Add VFIO live migration support")
added live migration support for the pds-vfio-pci driver. When
sending the SUSPEND command to the device, the driver sets the
type of suspend (i.e. P2P or FULL). However, the driver isn't
sending the type of suspend for the SUSPEND_STATUS command, which
will result in failures. Fix this by also sending the suspend type
in the SUSPEND_STATUS command.
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821184215.34564-1-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
anon_inode_getfile() never returns NULL pointer, it will return
ERR_PTR() when it fails, so replace the check with IS_ERR().
Fixes: bb500dbe2a ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20230819023716.3469037-1-yangyingliang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The VFIO_DEVICE_GET_INFO, VFIO_DEVICE_GET_REGION_INFO, and
VFIO_IOMMU_GET_INFO ioctls fill in an info struct followed by capability
structs:
+------+---------+---------+-----+
| info | caps[0] | caps[1] | ... |
+------+---------+---------+-----+
Both the info and capability struct sizes are not always multiples of
sizeof(u64), leaving u64 fields in later capability structs misaligned.
Userspace applications currently need to handle misalignment manually in
order to support CPU architectures and programming languages with strict
alignment requirements.
Make life easier for userspace by ensuring alignment in the kernel. This
is done by padding info struct definitions and by copying out zeroes
after capability structs that are not aligned.
The new layout is as follows:
+------+---------+---+---------+-----+
| info | caps[0] | 0 | caps[1] | ... |
+------+---------+---+---------+-----+
In this example caps[0] has a size that is not multiples of sizeof(u64),
so zero padding is added to align the subsequent structure.
Adding zero padding between structs does not break the uapi. The memory
layout is specified by the info.cap_offset and caps[i].next fields
filled in by the kernel. Applications use these field values to locate
structs and are therefore unaffected by the addition of zero padding.
Note that code that copies out info structs with padding is updated to
always zero the struct and copy out as many bytes as userspace
requested. This makes the code shorter and avoids potential information
leaks by ensuring padding is initialized.
Originally-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230809203144.2880050-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fixes: ad721705d0 ("vfio iommu: Add migration capability to report supported features")
Link: https://lore.kernel.org/r/20230801155352.1391945-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the module_fsl_mc_driver macro to simplify the code and
remove redundant initialization owner in vfio_fsl_mc_driver.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230809131536.4021639-1-lizetao1@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The cdx_driver_register() will set "THIS_MODULE" to driver.owner when
register a cdx_driver driver, so it is redundant initialization to set
driver.owner in the statement. Remove it for clean code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230808020937.2975196-1-lizetao1@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add Kconfig entries and pds-vfio-pci.rst. Also, add an entry in the
MAINTAINERS file for this new driver.
It's not clear where documentation for vendor specific VFIO
drivers should live, so just re-use the current amd
ethernet location.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-9-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It's possible that the device firmware crashes and is able to recover
due to some configuration and/or other issue. If a live migration
is in progress while the firmware crashes, the live migration will
fail. However, the VF PCI device should still be functional post
crash recovery and subsequent migrations should go through as
expected.
When the pds_core device notices that firmware crashes it sends an
event to all its client drivers. When the pds_vfio driver receives
this event while migration is in progress it will request a deferred
reset on the next migration state transition. This state transition
will report failure as well as any subsequent state transition
requests from the VMM/VFIO. Based on uapi/vfio.h the only way out of
VFIO_DEVICE_STATE_ERROR is by issuing VFIO_DEVICE_RESET. Once this
reset is done, the migration state will be reset to
VFIO_DEVICE_STATE_RUNNING and migration can be performed.
If the event is received while no migration is in progress (i.e.
the VM is in normal operating mode), then no actions are taken
and the migration state remains VFIO_DEVICE_STATE_RUNNING.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-8-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support dirty page tracking, the driver has to implement
the VFIO subsystem's vfio_log_ops. This includes log_start, log_stop,
and log_read_and_clear.
All of the tracker resources are allocated and dirty tracking on the
device is started during log_start. The resources are cleaned up and
dirty tracking on the device is stopped during log_stop. The dirty
pages are determined and reported during log_read_and_clear.
In order to support these callbacks admin queue commands are used.
All of the adminq queue command structures and implementations
are included as part of this patch.
PDS_LM_CMD_DIRTY_STATUS is added to query the current status of
dirty tracking on the device. This includes if it's enabled (i.e.
number of regions being tracked from the device's perspective) and
the maximum number of regions supported from the device's perspective.
PDS_LM_CMD_DIRTY_ENABLE is added to enable dirty tracking on the
specified number of regions and their iova ranges.
PDS_LM_CMD_DIRTY_DISABLE is added to disable dirty tracking for all
regions on the device.
PDS_LM_CMD_READ_SEQ and PDS_LM_CMD_DIRTY_WRITE_ACK are added to
support reading and acknowledging the currently dirtied pages.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-7-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add live migration support via the VFIO subsystem. The migration
implementation aligns with the definition from uapi/vfio.h and uses
the pds_core PF's adminq for device configuration.
The ability to suspend, resume, and transfer VF device state data is
included along with the required admin queue command structures and
implementations.
PDS_LM_CMD_SUSPEND and PDS_LM_CMD_SUSPEND_STATUS are added to support
the VF device suspend operation.
PDS_LM_CMD_RESUME is added to support the VF device resume operation.
PDS_LM_CMD_STATE_SIZE is added to determine the exact size of the VF
device state data.
PDS_LM_CMD_SAVE is added to get the VF device state data.
PDS_LM_CMD_RESTORE is added to restore the VF device with the
previously saved data from PDS_LM_CMD_SAVE.
PDS_LM_CMD_HOST_VF_STATUS is added to notify the DSC/firmware when
a migration is in/not-in progress from the host's perspective. The
DSC/firmware can use this to clear/setup any necessary state related
to a migration.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-6-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The pds_core driver will supply adminq services, so find the PF
and register with the DSC services.
Use the following commands to enable a VF:
echo 1 > /sys/bus/pci/drivers/pds_core/$PF_BDF/sriov_numvfs
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-5-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is the initial framework for the new pds-vfio-pci device driver.
This does the very basics of registering the PDS PCI device and
configuring it as a VFIO PCI device.
With this change, the VF device can be bound to the pds-vfio-pci driver
on the host and presented to the VM as an ethernet VF.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-3-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently only Mellanox uses the combine_ranges function. The
new pds_vfio driver also needs this function. So, move it to
a common location for other vendor drivers to use.
Also, fix RCT ordering while moving/renaming the function.
Cc: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20230807205755.29579-2-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This commit enables the dynamic allocation of EQs at runtime, allowing
for more flexibility in managing completion EQs and reducing the memory
overhead of driver load. Whenever a CQ is created for a given vector
index, the driver will lookup to see if there is an already mapped
completion EQ for that vector, if so, utilize it. Otherwise, allocate a
new EQ on demand and then utilize it for the CQ completion events.
Add a protection lock to the EQ table to protect from concurrent EQ
creation attempts.
While at it, replace mlx5_vector2irqn()/mlx5_vector2eqn() with
mlx5_comp_eqn_get() and mlx5_comp_irqn_get() which will allocate an
EQ on demand if no EQ is found for the given vector.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To accurately represent its purpose, rename the function that retrieves
the value of maximum vectors from mlx5_comp_vectors_count() to
mlx5_comp_vectors_max().
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now both the physical path and the emulated path can support an IO page
table replacement. Call iommufd_device_replace/iommufd_access_replace(),
when vdev->iommufd_attached is true.
Also update the VFIO_DEVICE_ATTACH_IOMMUFD_PT kdoc in the uAPI header.
Link: https://lore.kernel.org/r/b5f01956ff161f76aa52c95b0fa1ad6eaca95c4a.1690523699.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A driver that doesn't implement ops->dma_unmap shouldn't be allowed to do
vfio_pin/unpin_pages(), though it can use vfio_dma_rw() to access an iova
range. Deny !ops->dma_unmap cases in vfio_pin/unpin_pages().
Link: https://lore.kernel.org/r/85d622729d8f2334b35d42f1c568df1ededb9171.1690523699.git.nicolinc@nvidia.com
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
vfio_group is not needed for vfio device cdev, so with vfio device cdev
introduced, the vfio_group infrastructures can be compiled out if only
cdev is needed.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-26-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The IOMMU_CAP_CACHE_COHERENCY check only applies to the physical devices
that are IOMMU-backed. But it is now in the group code. If want to compile
vfio_group infrastructure out, this check needs to be moved out of the group
code.
Another reason for this change is to fail the device registration for the
physical devices that do not have IOMMU if the group code is not compiled
as the cdev interface does not support such devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-25-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds ioctl for userspace to attach device cdev fd to and detach
from IOAS/hw_pagetable managed by iommufd.
VFIO_DEVICE_ATTACH_IOMMUFD_PT: attach vfio device to IOAS or hw_pagetable
managed by iommufd. Attach can be undo
by VFIO_DEVICE_DETACH_IOMMUFD_PT or device
fd close.
VFIO_DEVICE_DETACH_IOMMUFD_PT: detach vfio device from the current attached
IOAS or hw_pagetable managed by iommufd.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-24-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds ioctl for userspace to bind device cdev fd to iommufd.
VFIO_DEVICE_BIND_IOMMUFD: bind device to an iommufd, hence gain DMA
control provided by the iommufd. open_device
op is called after bind_iommufd op.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718135551.6592-23-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds a local variable to store the user pointer cast result from arg.
It avoids the repeated casts in the code when more ioctls are added.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-22-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This saves some lines when adding the kvm get logic for the vfio_device
cdev path.
This also renames _vfio_device_get_kvm_safe() to be vfio_device_get_kvm_safe().
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-20-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds cdev support for vfio_device. It allows the user to directly
open a vfio device w/o using the legacy container/group interface, as a
prerequisite for supporting new iommu features like nested translation
and etc.
The device fd opened in this manner doesn't have the capability to access
the device as the fops open() doesn't open the device until the successful
VFIO_DEVICE_BIND_IOMMUFD ioctl which will be added in a later patch.
With this patch, devices registered to vfio core would have both the legacy
group and the new device interfaces created.
- group interface : /dev/vfio/$groupID
- device interface: /dev/vfio/devices/vfioX - normal device
("X" is a unique number across vfio devices)
For a given device, the user can identify the matching vfioX by searching
the vfio-dev folder under the sysfs path of the device. Take PCI device
(0000:6a:01.0) as an example, /sys/bus/pci/devices/0000\:6a\:01.0/vfio-dev/vfioX
implies the matching vfioX under /dev/vfio/devices/, and vfio-dev/vfioX/dev
contains the major:minor number of the matching /dev/vfio/devices/vfioX.
The user can get device fd by opening the /dev/vfio/devices/vfioX.
The vfio_device cdev logic in this patch:
*) __vfio_register_dev() path ends up doing cdev_device_add() for each
vfio_device if VFIO_DEVICE_CDEV configured.
*) vfio_unregister_group_dev() path does cdev_device_del();
cdev interface does not support noiommu devices, so VFIO only creates the
legacy group interface for the physical devices that do not have IOMMU.
noiommu users should use the legacy group interface.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-19-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
device_del() destroys the vfio-dev/vfioX under the sysfs for vfio_device.
There is no reason to keep it while the device is going to be unregistered.
This movement is also a preparation for adding vfio_device cdev. Kernel
should remove the cdev node of the vfio_device to avoid new registration
refcount increment while the device is going to be unregistered.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-18-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
.bind_iommufd() will generate an ID to represent this bond, which is
needed by userspace for further usage. Store devid in vfio_device_file
to avoid passing the pointer in multiple places.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-13-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This moves the noiommu compat validation logic into vfio_df_group_open().
This is more consistent with what will be done in vfio device cdev path.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-11-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO group has historically allowed multi-open of the device FD. This
was made secure because the "open" was executed via an ioctl to the
group FD which is itself only single open.
However, no known use of multiple device FDs today. It is kind of a
strange thing to do because new device FDs can naturally be created
via dup().
When we implement the new device uAPI (only used in cdev path) there is
no natural way to allow the device itself from being multi-opened in a
secure manner. Without the group FD we cannot prove the security context
of the opener.
Thus, when moving to the new uAPI we block the ability of opening
a device multiple times. Given old group path still allows it we store
a vfio_group pointer in struct vfio_device_file to differentiate.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-10-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is for counting the devices that are opened via the cdev path. This
count is increased and decreased by the cdev path. The group path checks
it to achieve exclusion with the cdev path. With this, only one path
(group path or cdev path) will claim DMA ownership. This avoids scenarios
in which devices within the same group may be opened via different paths.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-9-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow the vfio_device file to be in a state where the device FD is
opened but the device cannot be used by userspace (i.e. its .open_device()
hasn't been called). This inbetween state is not used when the device
FD is spawned from the group FD, however when we create the device FD
directly by opening a cdev it will be opened in the blocked state.
The reason for the inbetween state is that userspace only gets a FD but
doesn't gain access permission until binding the FD to an iommufd. So in
the blocked state, only the bind operation is allowed. Completing bind
will allow user to further access the device.
This is implemented by adding a flag in struct vfio_device_file to mark
the blocked state and using a simple smp_load_acquire() to obtain the
flag value and serialize all the device setup with the thread accessing
this device.
Following this lockless scheme, it can safely handle the device FD
unbound->bound but it cannot handle bound->unbound. To allow this we'd
need to add a lock on all the vfio ioctls which seems costly. So once
device FD is bound, it remains bound until the FD is closed.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-8-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This avoids passing too much parameters in multiple functions. Per the
input parameter change, rename the function to be vfio_df_open/close().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-7-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This makes the vfio file kAPIs to accept vfio device files, also a
preparation for vfio device cdev support.
For the kvm set with vfio device file, kvm pointer is stored in struct
vfio_device_file, and use kvm_ref_lock to protect kvm set and kvm
pointer usage within VFIO. This kvm pointer will be set to vfio_device
after device file is bound to iommufd in the cdev path.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares for making the below kAPIs to accept both group file
and device file instead of only vfio group file.
bool vfio_file_enforced_coherent(struct file *file);
void vfio_file_set_kvm(struct file *file, struct kvm *kvm);
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is preparation for adding vfio device cdev support. vfio device
cdev requires:
1) A per device file memory to store the kvm pointer set by KVM. It will
be propagated to vfio_device:kvm after the device cdev file is bound
to an iommufd.
2) A mechanism to block device access through device cdev fd before it
is bound to an iommufd.
To address the above requirements, this adds a per device file structure
named vfio_device_file. For now, it's only a wrapper of struct vfio_device
pointer. Other fields will be added to this per file structure in future
commits.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-2-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is the way user to invoke hot-reset for the devices opened by cdev
interface. User should check the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED
in the output of VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl before doing
hot-reset for cdev devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-11-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This copies the vfio_pci_dependent_device to userspace during looping each
affected device for reporting vfio_pci_hot_reset_info. This avoids counting
the affected devices and allocating a potential large buffer to store the
vfio_pci_dependent_device of all the affected devices before copying them
to userspace.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230718105542.4138-10-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This allows VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl use the iommufd_ctx
of the cdev device to check the ownership of the other affected devices.
When VFIO_DEVICE_GET_PCI_HOT_RESET_INFO is called on an IOMMUFD managed
device, the new flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is reported to indicate
the values returned are IOMMUFD devids rather than group IDs as used when
accessing vfio devices through the conventional vfio group interface.
Additionally the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED will be reported
in this mode if all of the devices affected by the hot-reset are owned by
either virtue of being directly bound to the same iommufd context as the
calling device, or implicitly owned via a shared IOMMU group.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-9-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are drivers that need to search vfio_device within a given dev_set.
e.g. vfio-pci. So add a helper.
vfio_pci_is_device_in_set() now returns -EBUSY in commit a882c16a2b
("vfio/pci: Change vfio_pci_try_bus_reset() to use the dev_set") where
it was trying to preserve the return of vfio_pci_try_zap_and_vma_lock_cb().
However, it makes more sense to return -ENODEV.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-8-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares to add another method for hot reset. The major hot reset logic
are moved to vfio_pci_ioctl_pci_hot_reset_groups().
No functional change is intended.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This suits more on what the code does.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718105542.4138-2-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Adjust log levels for common messages. (Oleksandr Natalenko,
Alex Williamson)
- Support for dynamic MSI-X allocation. (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities.
(Alex Williamson)
- Cleanup Kconfigs for vfio bus drivers. (Alex Williamson)
- Add support for CDX bus based devices. (Nipun Gupta)
- Fix race with concurrent mdev initialization. (Eric Farman)
-----BEGIN PGP SIGNATURE-----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=TOvh
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Adjust log levels for common messages (Oleksandr Natalenko, Alex
Williamson)
- Support for dynamic MSI-X allocation (Reinette Chatre)
- Enable and report PCIe AtomicOp Completer capabilities (Alex
Williamson)
- Cleanup Kconfigs for vfio bus drivers (Alex Williamson)
- Add support for CDX bus based devices (Nipun Gupta)
- Fix race with concurrent mdev initialization (Eric Farman)
* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Move the compat_class initialization to module init
vfio/cdx: add support for CDX bus
vfio/fsl: Create Kconfig sub-menu
vfio/platform: Cleanup Kconfig
vfio/pci: Cleanup Kconfig
vfio/pci-core: Add capability for AtomicOp completer support
vfio/pci: Also demote hiding standard cap messages
vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
vfio/pci: Support dynamic MSI-X
vfio/pci: Probe and store ability to support dynamic MSI-X
vfio/pci: Use bitfield for struct vfio_pci_core_device flags
vfio/pci: Update stale comment
vfio/pci: Remove interrupt context counter
vfio/pci: Use xarray for interrupt context storage
vfio/pci: Move to single error path
vfio/pci: Prepare for dynamic interrupt context storage
vfio/pci: Remove negative check on unsigned vector
vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
vfio/pci: demote hiding ecap messages to debug level
