The driver supports a "direct" mode of operation, where the SMP req frame
is directly copied into the command payload (and vice-versa for the SMP
resp).
To get at the SMP req frame data in the scatterlist the driver uses
phys_to_virt() on the DMA mapped memory dma_addr_t . This is broken, and
subsequently crashes as follows when an IOMMU is enabled:
Unable to handle kernel paging request at virtual address
ffff0000fcebfb00
...
pc : pm80xx_chip_smp_req+0x2d0/0x3d0
lr : pm80xx_chip_smp_req+0xac/0x3d0
pm80xx_chip_smp_req+0x2d0/0x3d0
pm8001_task_exec.constprop.0+0x368/0x520
pm8001_queue_command+0x1c/0x30
smp_execute_task_sg+0xdc/0x204
sas_discover_expander.part.0+0xac/0x6cc
sas_discover_root_expander+0x8c/0x150
sas_discover_domain+0x3ac/0x6a0
process_one_work+0x1d0/0x354
worker_thread+0x13c/0x470
kthread+0x17c/0x190
ret_from_fork+0x10/0x20
Code: 371806e1 910006d6 6b16033f 54000249 (38766b05)
---[ end trace b91d59aaee98ea2d ]---
note: kworker/u192:0[7] exited with preempt_count 1
Instead use kmap_atomic().
--
Difference to v1:
- use kmap_atomic() in both locations
Difference to v2:
- add whitespace around arithmetic (Damien)
Link: https://lore.kernel.org/r/1639390248-213603-1-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling scsi_remove_host() before scsi_add_host() results in a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000108
RIP: 0010:device_del+0x63/0x440
Call Trace:
device_unregister+0x17/0x60
scsi_remove_host+0xee/0x2a0
pm8001_pci_probe+0x6ef/0x1b90 [pm80xx]
local_pci_probe+0x3f/0x90
We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host()
has not been called yet at that point in time.
Function call tree:
pm8001_pci_probe()
|
`- pm8001_pci_alloc()
| |
| `- pm8001_alloc()
| |
| `- scsi_remove_host()
|
`- scsi_add_host()
Link: https://lore.kernel.org/r/20211201041627.1592487-1-ipylypiv@google.com
Fixes: 05c6c029a4 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-36-bvanassche@acm.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a
SET_NVMD_DATA response, as the log statement implies.
Fixes: 1f889b5871 ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition")
Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a follow up cleanup to the commit 924a3541ea ("scsi: libsas:
aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()")
Link: https://lore.kernel.org/r/20210929025807.646589-1-ipylypiv@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.
Properly free memory when the module is removed.
Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct inbound queue and outbound queue size in 'ib_log' and 'ob_log'
sysfs entries.
Link: https://lore.kernel.org/r/20210906170404.5682-4-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 1f02beff22 ("scsi: pm80xx: Remove global lock from outbound queue
processing") introduced a lock per outbound queue. Prior to that change the
driver was using a global lock for all outbound queues.
While processing the I/O responses and events the driver takes the outbound
queue spinlock and is supposed to release it in pm8001_ccb_task_free_done()
before calling command done(). Since the older code was using a global
lock, pm8001_ccb_task_free_done() was releasing the global spin lock. The
change that split the lock per outbound queue did not consider this and
pm8001_ccb_task_free_done() was still releasing the global lock.
Link: https://lore.kernel.org/r/20210906170404.5682-3-Ajish.Koshy@microchip.com
Fixes: 1f02beff22 ("scsi: pm80xx: Remove global lock from outbound queue processing")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During phyup event, the firmware provides the phy_id and port_id and driver
is supposed to use these during device handle registration. Previously the
driver was using the port id value from libsas during device handle
registration. Since id can be different from the one assigned by firmware,
this can lead to wrong device registration and drives not showing up.
Use firmware assigned port id during device registration.
Link: https://lore.kernel.org/r/20210906170404.5682-2-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable 'rv' is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Link: https://lore.kernel.org/r/20210804143319.115340-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")
The TMF timeout timer may trigger at the same time when the response from a
controller is being handled. When this happens the SAS task may get freed
before the response processing is finished.
Fix this by calling complete() only when SAS_TASK_STATE_DONE is not set.
A similar race condition was fixed in commit b90cd6f2b9 ("scsi: libsas:
fix a race condition when smp task timeout")
Link: https://lore.kernel.org/r/20210707185945.35559-1-ipylypiv@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix kernel-doc warnings then test again, wash, rinse, find more, then
repeat more/again.
Also fix spellos, some grammar, and some punctuation.
../drivers/scsi/pm8001/pm8001_ctl.c:557: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
** pm8001_ctl_fatal_log_show - fatal error logging
../drivers/scsi/pm8001/pm8001_ctl.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
** non_fatal_log_show - non fatal error logging
../drivers/scsi/pm8001/pm8001_ctl.c:622: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
** pm8001_ctl_gsm_log_show - gsm dump collection
Link: https://lore.kernel.org/r/20210708165723.8594-1-rdunlap@infradead.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is a set of minor fixes and clean ups in the core and various
drivers. The only core change in behaviour is the I/O retry for
spinup notify, but that shouldn't impact anything other than the
failing case.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYOqWWyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYBtAQCpqVdl
Axi1SpD6/UuKOgRmboWscoKD8FLHwvLDMRyCRQEAnLu3XdB9HcQrwZOkTG14vrfB
q2XB5cP4XAITxFLN1qo=
=9AO9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers. The major core change is a rework
to drop the status byte handling macros and the old bit shifted
definitions and the rest of the updates are minor fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
H0hkJN/Io7enFs5v3WA=
=zwIa
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
elx and mpi3mr being new drivers.
The major core change is a rework to drop the status byte handling
macros and the old bit shifted definitions and the rest of the updates
are minor fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
scsi: aha1740: Avoid over-read of sense buffer
scsi: arcmsr: Avoid over-read of sense buffer
scsi: ips: Avoid over-read of sense buffer
scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
scsi: elx: libefc: Fix less than zero comparison of a unsigned int
scsi: elx: efct: Fix pointer error checking in debugfs init
scsi: elx: efct: Fix is_originator return code type
scsi: elx: efct: Fix link error for _bad_cmpxchg
scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
scsi: elx: efct: Fix error handling in efct_hw_init()
scsi: elx: efct: Remove redundant initialization of variable lun
scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
scsi: lpfc: Fix build error in lpfc_scsi.c
scsi: target: iscsi: Remove redundant continue statement
scsi: qla4xxx: Remove redundant continue statement
scsi: ppa: Switch to use module_parport_driver()
scsi: imm: Switch to use module_parport_driver()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
...
Offlining a SATA device connected to a hisi SAS controller and then
scanning the host will result in detecting 255 non-existent devices:
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc
# echo "offline" > /sys/block/sdb/device/state
# echo "- - -" > /sys/class/scsi_host/host2/scan
# lsscsi
[2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda
[2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb
[2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh
...
[2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb
After a REPORT LUN command issued to the offline device fails, the SCSI
midlayer tries to do a sequential scan of all devices whose LUN number is
not 0. However, SATA does not support LUN numbers at all.
Introduce a generic sas_slave_alloc() handler which will return -ENXIO for
SATA devices if the requested LUN number is larger than 0 and make libsas
drivers use this function as their .slave_alloc callback.
Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com
Reported-by: Wu Bo <wubo40@huawei.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Also change the return error code from "-1" to "-ENOMEM".
Link: https://lore.kernel.org/r/20210610094605.16672-2-thunder.leizhen@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch prepares for converting SAM status codes into an enum. Without
this patch converting SAM status codes into an enumeration type would
trigger complaints about enum type mismatches for the SAS code.
Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When driver is loaded after rmmod some drives are not showing up during
discovery.
SATA drives are directly attached to the controller connected phys. During
device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out
during revalidation. This will trigger abort from host side and controller
successfully aborts the command and returns success. Post this successful
abort response ATA library decides to mark the disk as NODEV.
To overcome this, inside pm8001_scan_start() after phy_start() call, add get
start response and wait for few milliseconds to trigger next phy start.
This millisecond delay will give sufficient time for the controller state
machine to accept next phy start.
Link: https://lore.kernel.org/r/20210505120103.24497-1-ajish.koshy@microchip.com
Signed-off-by: Ajish Koshy <ajish.koshy@microchip.com>
Signed-off-by: Viswas G <viswas.g@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce spin lock for outbound queue. With this, driver need not acquire
HBA global lock for outbound queue processing.
Link: https://lore.kernel.org/r/20210415103352.3580-9-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Producer index(PI) outbound queue and consumer index(CI) for Outbound queue
are in DMA memory. During resume(), the stale PI and CI Values will lead to
unexpected behavior. These values should be reset to 0 during driver
reinitialization.
Link: https://lore.kernel.org/r/20210415103352.3580-8-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When controller runs into fatal error, I/Os get stuck with no response,
handler event is defined to complete the pending I/Os (SAS task and
internal task) and also perform the cleanup for the drives.
Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_iop1_count' is being introduced that tells if
the controller is alive by indicating controller ticks. If on subsequent
run we see the ticks changing that indicates that controller is not
dead.
Using the 'ctl_iop1_count' sysfs variable we can see ticks incrementing:
linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop1_count
0x00000069
0x0000006b
0x0000006d
0x00000072
Link: https://lore.kernel.org/r/20210415103352.3580-6-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_iop0_count' is being introduced that tells if
the controller is alive by indicating controller ticks. If on subsequent
run we see the ticks changing that indicates that controller is not
dead.
Using the 'ctl_iop0_count' sysfs variable we can see ticks incrementing:
linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_iop0_count
0x000000a3
0x000001db
0x000001e4
0x000001e7
Link: https://lore.kernel.org/r/20210415103352.3580-5-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_raae_count' is being introduced that tells if the
controller is alive by indicating controller ticks. If on subsequent run we
see the ticks changing in RAAE count that indicates that controller is not
dead.
Using the 'ctl_raae_count' sysfs variable we can see ticks incrementing:
linux-9saw:~# cat /sys/class/scsi_host/host*/ctl_raae_count
0x00002245
0x00002253
0x0000225e
Link: https://lore.kernel.org/r/20210415103352.3580-4-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_hmi_error' is being introduced to give the error
details if the MPI initialization fails
Using the 'ctl_hmi_error' sysfs variable we can check the error details:
linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_hmi_error
0x00000000
0x00000000
0x00000000
Link: https://lore.kernel.org/r/20210415103352.3580-3-Viswas.G@microchip.com
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A new sysfs variable 'ctl_mpi_state' is being introduced to check the state
of MPI.
Using the 'ctl_mpi_state' sysfs variable we can check the MPI state:
linux-2dq0:~# cat /sys/class/scsi_host/host*/ctl_mpi_state
MPI is successfully initialized
Link: https://lore.kernel.org/r/20210415103352.3580-2-Viswas.G@microchip.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
checkpatch reports the following:
ERROR: that open brace { should be on the previous line
+static struct error_fw flash_error_table[] =
+{
Fix a couple of instances of misplaced open bracket.
Link: https://lore.kernel.org/r/1617886593-36421-3-git-send-email-luojiaxing@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
checkpatch reports the following:
ERROR: space prohibited before that ',' (ctx:WxW)
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);
Remove unnecessary whitespace.
Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The for-loop iterates with a u8 loop counter i and compares this with the
loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a
potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop
counter. Fix this by making the loop counter the same type as
pm8001_ha->max_q_num.
[mkp: this is purely theoretical, max_q_num is currently limited to 64]
Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com
Fixes: 65df7d1986 ("scsi: pm80xx: Fix chip initialization failure")
Addresses-Coverity: ("Infinite loop")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
mpi_uninit_check() is not being called in an atomic context. The only
caller of mpi_uninit_check() is pm80xx_chip_soft_rst().
Callers of pm80xx_chip_soft_rst():
- pm8001_ioctl_soft_reset()
- pm8001_pci_probe()
- pm8001_pci_remove()
- pm8001_pci_suspend()
- pm8001_pci_resume()
There was a similar fix for mpi_init_check() in commit
d71023af4b ("scsi: pm80xx: Do not busy wait in MPI init check")
Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The mpi_uninit_check() takes longer for inbound doorbell register to be
cleared. Increase the timeout substantially so that the driver does not
fail to load.
Previously, the inbound doorbell wait time was mistakenly increased in the
mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the
mpi_init_check() wait time as-is as these are timeout values and if there
is a failure, waiting longer is not an issue.
Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com
Fixes: e90e236250 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check")
Reviewed-by: Vishakha Channapattan <vishakhavc@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Resolve a couple of conflicts between the 5.12 fixes branch and the
5.13 staging tree (iSCSI target and UFS).
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Inbound and outbound queues were not properly configured and that lead to
MPI configuration failure.
Fixes: 05c6c029a4 ("scsi: pm80xx: Increase number of supported queues")
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com
Reported-and-tested-by: Ash Izat <ash@ai0.uk>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On some configurations, gcc warns about overlapping source and destination
arguments to snprintf:
drivers/scsi/pm8001/pm8001_init.c: In function 'pm8001_request_msix':
drivers/scsi/pm8001/pm8001_init.c:977:3: error: 'snprintf' argument 4 may overlap destination object 'pm8001_ha' [-Werror=restrict]
977 | snprintf(drvname, len, "%s-%d", pm8001_ha->name, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/pm8001/pm8001_init.c:962:56: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
962 | static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~
I first assumed this was a gcc bug, as that should not happen, but a
reduced test case makes it clear that this happens when the loop counter is
not bounded by the array size.
Help the compiler out by adding an explicit limit here to make the code
slightly more robust and avoid the warning.
Link: https://godbolt.org/z/6T1qPM
Link: https://lore.kernel.org/r/20210323125458.1825564-1-arnd@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm80xx_hwi.c:1427: warning: expecting prototype for pm8001_chip_init(). Prototype was for pm80xx_chip_init() instead
drivers/scsi/pm8001/pm80xx_hwi.c:1584: warning: expecting prototype for pm8001_chip_soft_rst(). Prototype was for pm80xx_chip_soft_rst() instead
drivers/scsi/pm8001/pm80xx_hwi.c:1711: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_intx_interrupt_enable() instead
drivers/scsi/pm8001/pm80xx_hwi.c:1722: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm80xx_chip_intx_interrupt_disable() instead
drivers/scsi/pm8001/pm80xx_hwi.c:1733: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_interrupt_enable() instead
drivers/scsi/pm8001/pm80xx_hwi.c:1752: warning: expecting prototype for pm8001_chip_interrupt_disable(). Prototype was for pm80xx_chip_interrupt_disable() instead
drivers/scsi/pm8001/pm80xx_hwi.c:4192: warning: expecting prototype for pm8001_chip_smp_req(). Prototype was for pm80xx_chip_smp_req() instead
drivers/scsi/pm8001/pm80xx_hwi.c:4775: warning: expecting prototype for pm8001_chip_phy_stop_req(). Prototype was for pm80xx_chip_phy_stop_req() instead
drivers/scsi/pm8001/pm80xx_hwi.c:4907: warning: expecting prototype for pm8001_chip_isr(). Prototype was for pm80xx_chip_isr() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-23-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead
drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead
drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead
drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-19-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_ctl.c:313: warning: expecting prototype for pm8001_ctl_sas_address_show(). Prototype was for pm8001_ctl_host_sas_address_show() instead
drivers/scsi/pm8001/pm8001_ctl.c:530: warning: expecting prototype for pm8001_ctl_aap_log_show(). Prototype was for pm8001_ctl_iop_log_show() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-14-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_sas.c:989: warning: expecting prototype for and hard reset for(). Prototype was for pm8001_I_T_nexus_reset() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-12-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_init.c:192: warning: expecting prototype for tasklet for 64 msi(). Prototype was for pm8001_tasklet() instead
drivers/scsi/pm8001/pm8001_init.c:872: warning: expecting prototype for pm8001_set_phy_settings_ven_117c_12Gb(). Prototype was for pm8001_set_phy_settings_ven_117c_12G() instead
Link: https://lore.kernel.org/r/20210303144631.3175331-9-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
Cc: Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>
Cc: Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Call chain analysis, pm8001_hwi.c:
pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet()
-> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr()
-> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)]
-> process_one_iomb()
-> mpi_hw_event()
-> hw_event_sas_phy_up()
-> pm8001_bytes_dmaed()
-> hw_event_sata_phy_up
-> pm8001_bytes_dmaed()
All functions are invoked by process_one_iomb(), which is invoked by the
interrupt service routine and the tasklet handler. A similar call chain is
also found at pm80xx_hwi.c. Pass GFP_ATOMIC.
For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls
wait_for_completion() and msleep(). Pass GFP_KERNEL.
Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LLDDs report events to libsas with .notify_port_event and .notify_phy_event
callbacks.
These callbacks are fixed and so there is no reason why the functions
cannot be called directly, so do that.
This neatens the code slightly, makes it more obvious, and reduces function
pointer usage, which is generally a good thing. Downside is that there are
2x more symbol exports.
[a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables]
Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A block of code is indented one level too deeply, clean this up.
Link: https://lore.kernel.org/r/20210115095824.9170-1-colin.king@canonical.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Indentation does not match nesting level")
Added a log message in SATA completion path to capture the status of failed
command. If the status does not match any expected status, another message
will be logged.
On IO failure with known status, the log message will be:
[ 1712.951735] pm80xx0:: mpi_sata_completion 2269: IO failed device_id 16385 status 0x1 tag XX
If the firmware returns unexpected status, a message of the following
format will be logged:
[ 1712.951735] pm80xx0:: mpi_sata_completion XXXX: Unknown status device_id XXXXX status 0xX tag XX
Link: https://lore.kernel.org/r/20210109123849.17098-8-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Vishakha Channapattan <vishakhavc@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In check_fw_ready() we first wait for ILA to come up and then we wait for
RAAE to come up and IOPs and so on. This is a sequential check. Because of
this, ILA image seems to be not ready in the allocated time and so the
driver marks it as "not ready" and then moves on to other FW images.
ILA does become ready eventually, but is not checked again. The driver
concludes that FW is not ready when it actually is.
Instead of sequentially polling each image, we keep polling for all images
to be ready. The timeout for the polling has been set to the sum of what
was used for each individual image.
Link: https://lore.kernel.org/r/20210109123849.17098-7-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Bhavesh Jashnani <bjashnani@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function pm80xx_get_fatal_dump() has two issues that result in the
fatal dump not being able to complete successfully.
1. Trying to collect fatal_logs from the application fails because we are
not shifting the MEMBASE-II register properly. Once we read 64K region
of data we have to shift the MEMBASE-II register and read the next
chunk. Only then would we be able to get complete data.
2. If a timeout occurs, our application will get stuck.
Link: https://lore.kernel.org/r/20210109123849.17098-6-Viswas.G@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
