Commit graph

1462 commits

Author SHA1 Message Date
Linus Torvalds
8d2faea672 This is the bulk of GPIO changes for the v4.3 kernel cycle:
Core changes:
 
 - Root out the wrapper devm_gpiod_get() and gpiod_get() etc
   versions of the descriptor calls that did not use the flags
   argument on the end. This was around for too long and eventually
   Uwe Kleine-König took the time to clean it out and the last
   users are removed along with the macros in this tag. In several
   cases the use of flags simplifies the code. For this reason we
   have (ACKed) patches hitting in DRM, IIO, media, NFC, USB+PHY
   up until we hammer in the nail with removing the macros.
 
 - Add a fat document describing how much ready-made GPIO stuff
   we have i the kernel to discourage people from reinventing
   a square wheel in userspace, as so often happens.
 
 - Create a separate lockdep class for each instance of a GPIO
   IRQ chip instead of using one class for all chips, as the current
   code will not work with systems with several GPIO chips doing
   lockdep debugging.
 
 - Protect against driver unloading also when a GPIO line is only
   used as IRQ for the GPIOLIB_IRQCHIP helpers.
 
 - If the GPIO chip has no designated owner, assign the parent
   device driver owner as owner.
 
 - Consolidation of chained IRQ handler install/remove replacing
   all call sites where irq_set_handler_data() and
   irq_set_chained_handler() were done in succession with a
   combined call to irq_set_chained_handler_and_data(). This
   series was created by Thomas Gleixner after the problem was
   observed by Russell King.
 
 - Tglx also made another series of patches switching
   __irq_set_handler_locked() for irq_set_handler_locked() which
   is way cleaner.
 
 - Tglx and Jiang Liu wrote a good bunch of patches to make use of
   irq_desc_get_xxx() accessors and avoid looking up irq_descs
   from IRQ numbers. The goal is to get rid of the irq number
   from the handlers in the IRQ flow which is nice.
 
 - Rob Herring killed off the set_irq_flags() for all GPIO
   drivers. This was an ARM specific function that is replaced
   with the generic irq_modify_status() where special flags
   are actually needed.
 
 - When an OF node has a pin range for its GPIOs, return
   -EPROBE_DEFER if the pin controller isn't available.
   Pretty logical, yet needed to be fixed.
 
 - If a driver using GPIOLIB_IRQCHIP has its own
   irq_*_resources call back, then call these instead of the
   defaults provided by the GPIOLIB.
 
 - Fix an undocumented ABI hole: named GPIOs were not
   properly documented.
 
 Driver improvements:
 
 - Add get_direction() support to the generic GPIO driver, it's
   strange that we didn't have that before.
 
 - Make it possible to have input-only GPIO chips using the
   generic GPIO driver.
 
 - Clean out platform data support from the Emma Mobile (EM)
   driver
 
 - Finegrained runtime PM support for the RCAR driver.
 
 - Support r8a7795 (R-car H3) in the RCAR driver.
 
 - Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.
 
 - Some consolidation and new support in the MPC8xxx driver,
   we now support MPC5125.
 
 - Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
   spinlocks making it work better with the realime patches.
 
 - Interrupt support for the EXTRAXFS GPIO driver.
 
 - Make the ETRAXFS GPIO driver support also ARTPEC-3.
 
 - Interrupt and wakeup support for the BRCMSTB driver, also for
   wakeup from S5 cold boot.
 
 - Mask MXC IRQs during suspend.
 
 - Improve OMAP2 GPIO set_debounce() to work according to spec.
 
 - The VF610 driver handles IRQs properly.
 
 New drivers:
 
 - ZTE ZX GPIO driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV52lvAAoJEEEQszewGV1zOVcP/2ZgkfRgl119LZnWShfrEJWq
 UXaNzSaPNgvDzvGaqqi62SZQuhrdIWRKfMPtAuMGbEn5aJx0JC5UAOYjjfkKBqpO
 toqc1w2DScc0JTorY8qgczIBDO1A3ZBAcIvXXpOduy/JaKPoQteRN8WYTynPw48/
 0+97ZODwhyOkfeqmvUClkc9gW4XT68dudb0Lv1nQjsZmd1dHF2PZlwH3aL9sV68j
 GJAqf09xNqZaWWQBhs+J3ptsYjaJfYjo9NOOUf0Y/UgqXO3vB+2S4EmRATaRHS2F
 aHdj03sNZCNSDEa35WwetbLRGxPzSWmfxmBzQQ1baGdcJICn7Yv58EklPKRvwtMo
 ZpUsgiOV4OUIEClPJohs4xbl2HRsOYB3VbcihkXjVAxS6i2/jgA3Tn8ATvUSZ8wq
 TX8D6BfciigRCkT2G+B0TQBmcX1IQsMd1DBUNfw7Dk1TK/vxH4UYWbke422RjKGz
 ORJ+0DfShMCdYjrCVlt7UbFcqE3L5CnrztLQ3oFt0om2JsSWztV9V579G+Dqo9CI
 fE4G3xlsF33UCvXcmnOp6PuU+ZYBodLggkmK4REy2D3LCOnkcKq0U8Fj5RssApZ9
 FdqVYck555ZpcBiN8ihB97WsmU+0XhBjblCbgzr6GxUw8EJ4x8H9nlraA6bluFoP
 9c2qgPxjCq/VWA/F0YOU
 =iQ2P
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.3 kernel cycle.

  There is quite a lot going on in the GPIO subsystem this merge window,
  so the main matter is decribed below.

  The hits in other subsystems when making the GPIO flags optional are
  all ACKed by their respective subsystem maintainers.

  Core changes:

   - Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
     of the descriptor calls that did not use the flags argument on the
     end.  This was around for too long and eventually Uwe Kleine-König
     took the time to clean it out and the last users are removed along
     with the macros in this tag.  In several cases the use of flags
     simplifies the code.  For this reason we have (ACKed) patches
     hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
     nail with removing the macros.

   - Add a fat document describing how much ready-made GPIO stuff we
     have i the kernel to discourage people from reinventing a square
     wheel in userspace, as so often happens.

   - Create a separate lockdep class for each instance of a GPIO IRQ
     chip instead of using one class for all chips, as the current code
     will not work with systems with several GPIO chips doing lockdep
     debugging.

   - Protect against driver unloading also when a GPIO line is only used
     as IRQ for the GPIOLIB_IRQCHIP helpers.

   - If the GPIO chip has no designated owner, assign the parent device
     driver owner as owner.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().

     This series was created by Thomas Gleixner after the problem was
     observed by Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx and Jiang Liu wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

   - Rob Herring killed off the set_irq_flags() for all GPIO drivers.
     This was an ARM specific function that is replaced with the generic
     irq_modify_status() where special flags are actually needed.

   - When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
     if the pin controller isn't available.  Pretty logical, yet needed
     to be fixed.

   - If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
     back, then call these instead of the defaults provided by the
     GPIOLIB.

   - Fix an undocumented ABI hole: named GPIOs were not properly
     documented.

  Driver improvements:

   - Add get_direction() support to the generic GPIO driver, it's
     strange that we didn't have that before.

   - Make it possible to have input-only GPIO chips using the generic
     GPIO driver.

   - Clean out platform data support from the Emma Mobile (EM) driver

   - Finegrained runtime PM support for the RCAR driver.

   - Support r8a7795 (R-car H3) in the RCAR driver.

   - Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.

   - Some consolidation and new support in the MPC8xxx driver, we now
     support MPC5125.

   - Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
     spinlocks making it work better with the realime patches.

   - Interrupt support for the EXTRAXFS GPIO driver.

   - Make the ETRAXFS GPIO driver support also ARTPEC-3.

   - Interrupt and wakeup support for the BRCMSTB driver, also for
     wakeup from S5 cold boot.

   - Mask MXC IRQs during suspend.

   - Improve OMAP2 GPIO set_debounce() to work according to spec.

   - The VF610 driver handles IRQs properly.

  New drivers:

   - ZTE ZX GPIO driver"

* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: extraxfs: fix returnvar.cocci warnings"
  gpio: tc3589x: use static container helper
  gpio: xlp: fix error return code
  gpio: vf610: handle level IRQ's properly
  gpio: max732x: Fix error handling in probe()
  gpio: omap: fix clk_prepare/unprepare usage
  gpio: omap: protect regs access in omap_gpio_irq_handler
  gpio: omap: fix omap2_set_gpio_debounce
  gpio: omap: switch to use platform_get_irq
  gpio: omap: remove wrong irq_domain_remove usage in probe
  gpiolib: add description for gpio irqchip fields in struct gpio_chip
  gpio: extraxfs: fix returnvar.cocci warnings
  gpiolib: irqchip: use different lockdep class for each gpio irqchip
  gpio/grgpio: fix deadlock in grgpio_irq_unmap()
  Documentation: gpio: consumer: describe active low property
  gpio: mxc: fix section mismatch warning
  gpio/mxc: mask gpio interrupts in suspend
  gpio: omap: Fix missing raw locks conversion
  gpio: brcmstb: support wakeup from S5 cold boot
  gpio: brcmstb: Add interrupt and wakeup source support
  ...
2015-09-04 10:07:45 -07:00
Linus Walleij
5f6f02cd49 Linux 4.2-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVtTRqAAoJEHm+PkMAQRiGN+wH/1mPJBCvt7DqvV90+/QKPEA6
 KXWtiy+oDavOv1vPcwL4gdYmMqXd2fSv82Zv5+E5ABFHXSyZvG5eCZvQLPz0V73f
 ldrSgTYVfbYb0W+TnaC1gr8aMS38i4F/eXCoPZMtO8WyUn7xhJZS9Y3U8Ff4/gp3
 to+4TaHhsnv2R79UyoR4elObo2n6aMkBSertjndbYoEQ4Zgr5iIoxbMDi4raeghP
 BLB6Mh50tqNMxE5OL/ERj1oHmJK9TIy2sNmOhP/1xp7XGK/KZm8Z+CIglaf1gOcM
 IM8pEgwDIlxp78MERn/PB/+xDkgUw0W9OqKPcUxiIt+M7TNRQ9UTb4Tn1SR2/cE=
 =fHSS
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-rc4' into devel

Linux 4.2-rc4
2015-08-13 14:42:55 +02:00
Greg Kroah-Hartman
1c46ae0af6 Second set of new device support, features and cleanup for the 4.3 cycle.
Take 2 also includes a fix set that was too late for the 4.2 cycle.
 
 As we had a lot of tools and docs work in this set, I have broken those
 out into their own categories in this description.
 
 Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
 * Poll functions for both event chardev and the buffer one were returning
   negative error codes (via a positive value).
 * A recent change to lsiio adding some error handling that was wrong and
   stopped the tool working.
 * bmg160 was missing some dependencies in Kconfig
 * berlin2-adc had a misshandled register (wrote a value rather than a bitmap)
 
 New device support
 * TI opt3001 light sensor
 * TXC PA12 ALS and proximity sensor.
 * mcp3301 ADC support (in mcp320x driver)
 * ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
   common support to allow different WHOAMI register addresses, devices with
   fixed scale and allow interrupt equiped magnetometers).
 * ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
 * ADIS16266 gyro (in the adis16260 driver)
 * ADIS16137 gyro (in the adis16136 driver)
 
 New functionality
 * mmc35240 DT bindings.
 * Inverse unit conversion macros to aid handing of values written to sysfs
   attributes.
 
 Core cleanup
 * Forward declaration of struct iio_trigger to avoid a compile warning.
 
 Driver cleanup / fixes
 * mxs-lradc
   - Clarify which parts are supported.
   - Fix spelling erorrs.
   - Missing/extra includes
   - reorder includes
   - add datasheet name listings for all usable channels (to allow them
     to be bound by name from consumer drivers)
 * acpi-als - add some function prefixes as per general iio style.
 * bmc150_magn - replace a magic value with the existing define.
 * vf610 - determine possible sample frequencies taking into account the
   electrical characteristics (defining a minimum sample time)
 * dht11
   - whitespace
   - additional docs
   - avoid mulitple assignments in one line
   - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
     previously used for timing.
 * Fix all drivers that consider 0 a valid IRQ for historical reasons.
 * Export I2C module alias info where previously missing (to allow autoprobing)
 * Export OF module alias info where previously missing.
 * mmc35240 - switch some variables into arrays to improve readability.
 * mlx90614 - define some magic numbers for readability.
 * bmc150_magn
   - expand area locked by a mutex to cover all the use of the
     data->buffer.
   - use descriptive naming for a mask instead of a magic value.
 * berin2-adc
   - pass up an error code rather that a generic error
   - constify the iio_chan_spec
   - some other little tidy ups.
 * stk8312
   - fix a dependency on triggered buffers in kconfig
   - add a check for invalid attribute values
   - improve error handling by returning error codes where possible and
     return immediately where relevant
   - rework macro defs to use GENMASK etc
   - change some variable types to reduce unnecessary casting
   - clean up code style
   - drop a local buffer copy for bulk reads and use the one in data->buffer
      instead.
 * adis16400 - the adis16448 gyroscope scale was wrong.
 * adis16480 - some more wrong scales for various parts.
 * adis16300 - has an undocumented product id and serial number registers so
   use them.
 * iio_simple_dummy - fix some wrong code indentation.
 * bmc150-accel - use the chip ID to detect the chip present rather than
   verifying the expected part was there.  This was in response to a wrong
   ACPI entry on the WinBook TW100.
 * mma8452
   - fix _get_hp_filter_index
   - drop a double include
   - pass up an error code rather than rewriting it
   - range check input values to attribute writes
   - register defs tidy up using GENMASK and reordering them to be easier to
     follow.
   - various coding style cleanups
   - put the Kconfig entry in the write place (alphabetically).
 
 Tools related
 * Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
   use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
   them in the middle of normal output.
 * Fix tools to allow that scale and offset attributes are optional.
 * More tools fixes including allowing true 32bit data (previously an overflow
   prevented more than 31bits)
 * Drop a stray header guard that ended up in a c file.
 * Make calc_digits static as it isn't exported or in the header.
 * Set ci_array pointer to NULL after free as a protection against non safe
   usage of the tools core code.  Also convert a double pointer to a single
   one as the extra level of indirection was unnecessary.
 
 Docs
 * DocBook introduction by Daniel Baluta.  Glad we are beginning to
   draw together some more introductory docs to suplement the various
   tools / examples.
 * Drop bytes_per_datum sysfs attribute docs as it no longer exists.
 * A whole load of missing / fixing of kernel-doc for the core of IIO.
 * Document the trigger name sysfs attribute in the ABI docs.
 * Minor typos in the ABI docs related to power down modes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVy5EbAAoJEFSFNJnE9BaIyjEQAIXc+mjgdyMJEXLKlKKGCSY5
 EX7saX91IeSK5y0CWX0hd0VPewaj4ExG7PWo3gqUSm1L9zmusLcyJm8W2pev3CGE
 m7s40efxZJw0Jmmu18a3LCfcHUu/LWl4mHQtZy/AFGgWhZzWIyKA2XLqgc+Wu9qb
 sjzleSJ05etDksyA7JWFCrrwBnJlW4lD25o0nD0kt3Wry2wlbN2JvZ9QLmmoc0ex
 shvtI556Ew0FRywT9ir555EoJNAQQMW85Ft0dWFBnLwgc67nFTa4YNRXgoRlzhh/
 sRnGKzrs5SVc1c9sxiVS4utiazxy/irHgZ5FkvTTq7F+GXeIwPK9Xv/SXZTmvs5w
 lrSazRIjiLqWgpv/5oaOOGlikbpctI2kSXO0GbCW8th+l3KnKcKfComa3fnU7dca
 /lofp/JzpIfwM+Bnjl1nlNuEbT0mlfJySfhUSSu/kHJxOcvDfkK4vv3oSfFp5nbF
 rhA9vbVEfopXTGIOwWDjV4j0HtMCEHgOPN3T0kuyiYiWZUIjfJXchXG8e5h9/ncd
 ACjH3fg6FQtHzTtzqLQky/NVAKcnFrgJSokN25GXF7R95TxufYJ6RIfnenJiCd2n
 QCIdPam4bZh3/C2QYtiqWKY5e+zfkqs88/Er/HGgvxRUhKCbTvCcey1RY7FEDFHY
 +9nMx/Yts8L1ulUEMjsm
 =/b3G
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.3b-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for the 4.3 cycle.
Take 2 also includes a fix set that was too late for the 4.2 cycle.

As we had a lot of tools and docs work in this set, I have broken those
out into their own categories in this description.

Fixes from the pull request '4th set of IIO fixes for the 4.2 cycle'.
* Poll functions for both event chardev and the buffer one were returning
  negative error codes (via a positive value).
* A recent change to lsiio adding some error handling that was wrong and
  stopped the tool working.
* bmg160 was missing some dependencies in Kconfig
* berlin2-adc had a misshandled register (wrote a value rather than a bitmap)

New device support
* TI opt3001 light sensor
* TXC PA12 ALS and proximity sensor.
* mcp3301 ADC support (in mcp320x driver)
* ST lsm303agr accelerometer and magnetometer drivers (plus some st-sensors
  common support to allow different WHOAMI register addresses, devices with
  fixed scale and allow interrupt equiped magnetometers).
* ADIS16305, ADIS16367, ADIS16445IMUs (in the adis16400 driver)
* ADIS16266 gyro (in the adis16260 driver)
* ADIS16137 gyro (in the adis16136 driver)

New functionality
* mmc35240 DT bindings.
* Inverse unit conversion macros to aid handing of values written to sysfs
  attributes.

Core cleanup
* Forward declaration of struct iio_trigger to avoid a compile warning.

Driver cleanup / fixes
* mxs-lradc
  - Clarify which parts are supported.
  - Fix spelling erorrs.
  - Missing/extra includes
  - reorder includes
  - add datasheet name listings for all usable channels (to allow them
    to be bound by name from consumer drivers)
* acpi-als - add some function prefixes as per general iio style.
* bmc150_magn - replace a magic value with the existing define.
* vf610 - determine possible sample frequencies taking into account the
  electrical characteristics (defining a minimum sample time)
* dht11
  - whitespace
  - additional docs
  - avoid mulitple assignments in one line
  - Use the new funciton ktime_get_resolution_ns to cleanup a nasty trick
    previously used for timing.
* Fix all drivers that consider 0 a valid IRQ for historical reasons.
* Export I2C module alias info where previously missing (to allow autoprobing)
* Export OF module alias info where previously missing.
* mmc35240 - switch some variables into arrays to improve readability.
* mlx90614 - define some magic numbers for readability.
* bmc150_magn
  - expand area locked by a mutex to cover all the use of the
    data->buffer.
  - use descriptive naming for a mask instead of a magic value.
* berin2-adc
  - pass up an error code rather that a generic error
  - constify the iio_chan_spec
  - some other little tidy ups.
* stk8312
  - fix a dependency on triggered buffers in kconfig
  - add a check for invalid attribute values
  - improve error handling by returning error codes where possible and
    return immediately where relevant
  - rework macro defs to use GENMASK etc
  - change some variable types to reduce unnecessary casting
  - clean up code style
  - drop a local buffer copy for bulk reads and use the one in data->buffer
     instead.
* adis16400 - the adis16448 gyroscope scale was wrong.
* adis16480 - some more wrong scales for various parts.
* adis16300 - has an undocumented product id and serial number registers so
  use them.
* iio_simple_dummy - fix some wrong code indentation.
* bmc150-accel - use the chip ID to detect the chip present rather than
  verifying the expected part was there.  This was in response to a wrong
  ACPI entry on the WinBook TW100.
* mma8452
  - fix _get_hp_filter_index
  - drop a double include
  - pass up an error code rather than rewriting it
  - range check input values to attribute writes
  - register defs tidy up using GENMASK and reordering them to be easier to
    follow.
  - various coding style cleanups
  - put the Kconfig entry in the write place (alphabetically).

Tools related
* Tools cleanup - drop an explicity NULL comparison, some unnecessary braces,
  use the ARRAY_SIZE macro, send error messages to stderr instead of dropping
  them in the middle of normal output.
* Fix tools to allow that scale and offset attributes are optional.
* More tools fixes including allowing true 32bit data (previously an overflow
  prevented more than 31bits)
* Drop a stray header guard that ended up in a c file.
* Make calc_digits static as it isn't exported or in the header.
* Set ci_array pointer to NULL after free as a protection against non safe
  usage of the tools core code.  Also convert a double pointer to a single
  one as the extra level of indirection was unnecessary.

Docs
* DocBook introduction by Daniel Baluta.  Glad we are beginning to
  draw together some more introductory docs to suplement the various
  tools / examples.
* Drop bytes_per_datum sysfs attribute docs as it no longer exists.
* A whole load of missing / fixing of kernel-doc for the core of IIO.
* Document the trigger name sysfs attribute in the ABI docs.
* Minor typos in the ABI docs related to power down modes.
2015-08-12 12:43:41 -07:00
Cristina Opriceana
41d903c000 iio: event: Remove negative error code from iio_event_poll
Negative return values are not supported by iio_event_poll since
its return type is unsigned int.

Fixes: f18e7a068a ("iio: Return -ENODEV for file operations if the device has been unregistered")

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12 19:26:39 +01:00
Cristina Opriceana
1bdc029390 iio: industrialio-buffer: Fix iio_buffer_poll return value
Change return value to 0 if no device is bound since
unsigned int cannot support negative error codes.

Fixes: f18e7a068 ("iio: Return -ENODEV for file operations if the
device has been unregistered")

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12 19:26:34 +01:00
Markus Pargmann
06d2f6ca5a iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are required
This patch adds selects for IIO_BUFFER and IIO_TRIGGERED_BUFFER. Without
IIO_BUFFER, the driver does not compile.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12 19:24:13 +01:00
Hartmut Knaack
57cb06762d iio:adc:berlin2-adc: Fix register definition
Active channel number is stored in BERLIN2_SM_CTRL as value, instead of a
bit map.
The masks for channel interrupts and data ready are a 16 bits wide bit
map each, instead of just 4 bits.

Also correct the data mask for the temperature sensor, which was
Reported-by: Antoine Tenart <antoine.tenart@free-electrons.com>

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-12 19:24:08 +01:00
Hartmut Knaack
8838cc7f3c iio:accel:mma8452: reorder Kconfig entry
Move the entry in Kconfig to its alphabetically correct position.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:38:01 +01:00
Hartmut Knaack
686027fbc6 iio:accel:mma8452: coding style cleanup
Some coding style cleanups, mainly indicated by checkpatch.pl, which
includes indentation changes, drop spaces after casts and befor tabs.
Also insert empty lines after logical blocks and before unconditional
returns.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:37:21 +01:00
Hartmut Knaack
69abff81d7 iio:accel:mma8452: rework register definitions
Rework register definitions to be sorted by register and bit number, with
bit definitions cascaded under the appropriate register, use GENMASK for
consecutive bitmasks and realign properly.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:36:35 +01:00
Hartmut Knaack
1121822618 iio:accel:mma8452: check values to be written
Check values to be written to the device for valid lower and upper bounds.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:30:42 +01:00
Hartmut Knaack
b9fddcdb44 iio:accel:mma8452: pass up real error code
Pass up the error code provided by functions.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:29:48 +01:00
Hartmut Knaack
8337455296 iio:accel:mma8452: drop double include
One inclusion of linux/iio/trigger_consumer.h is sufficient.

Fixes: 	ae6d9ce056 ("iio: mma8452: Add support for interrupt driven triggers.")
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:28:35 +01:00
Hartmut Knaack
001fceb9c6 iio:accel:mma8452: fix _get_hp_filter_index
To iterate through the available frequencies of mma8452_hp_filter_cutoff[],
the array size of a row of that table needs to be provided to
_get_int_plus_micros_index().

Fixes: 	1e79841a00 ("iio: mma8452: Add highpass filter configuration.")

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 17:27:26 +01:00
Bastien Nocera
0ad4bf3701 iio:accel:bmc150-accel: Use the chip ID to detect sensor variant
Instead of using the I2C or ACPI ID to determine which variant of
the chipset to use, determine that from the chip ID.

Under Windows, the same driver is used for those variants and, despite
incorrect ACPI data, it is able to load and operate the accelerometer.

Fixes the accelerometer failing with:
bmc150_accel i2c-BMA250E:00: Invalid chip f8
on the WinBook TW100

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 16:36:46 +01:00
Bastien Nocera
c4eaab798b iio:accel:bmc150-accel: Move bmc150_accel_chip_init()
Move bmc150_accel_chip_init() so that we can use
bmc150_accel_chip_info_tbl[] in it.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 16:25:47 +01:00
Lars-Peter Clausen
5450c360d4 iio: adis16136: Add ADIS16137 support
The ADIS16137 is register map compatible to the ADIS16136, but has a
different scale factor for the gyroscope output.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 15:09:21 +01:00
Lars-Peter Clausen
72d9c9869d iio: adis16400: Add ADIS16445 support
The ADIS16445 is similar to the ADIS16448, but without the magnetometer and
pressure channels as well as different scale factors for the gyroscope and
accelerometer outputs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 15:08:55 +01:00
Lars-Peter Clausen
dc8615ce34 iio: adis16400: Add ADIS16367 support
The ADIS16367 is mostly register compatible to the ADIS16360. The only
difference is the scale factor for the gyroscope output.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:58:42 +01:00
Lars-Peter Clausen
f1afda124b iio: adis16260: Add ADIS16266 support
The ADIS16266 is mostly register compatible to the ADIS16260. The
difference is a different gyroscope scale factor as well not having the
relative angular displacement channel.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:58:15 +01:00
Lars-Peter Clausen
3c38676079 iio: adis16400: Add ADIS16305 support
The ADIS16305 is fully register map compatible to the ADIS16300.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:54:20 +01:00
Lars-Peter Clausen
bd95a89e7a iio: adis16400: adis16300 has product ID and serial number
The ADIS16300 has the product ID and serial number registers, they are just
not documented. Set the appropriate flags so the driver makes use of them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:53:26 +01:00
Lars-Peter Clausen
7abad1063d iio: adis16480: Fix scale factors
The different devices support by the adis16480 driver have slightly
different scales for the gyroscope and accelerometer channels.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:51:56 +01:00
Lars-Peter Clausen
8166537283 iio: adis16400: Fix adis16448 gyroscope scale
Use the correct scale for the adis16448 gyroscope output.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:48:43 +01:00
Cristina Opriceana
8e563b0dab iio: trigger: Add missing fields in kernel docs
Fix kernel docs warnings by adding the missing description
for each of the existing function parameters.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:45:49 +01:00
Hartmut Knaack
7a9fbd250c iio:accel:stk8312: drop local buffer
Drop the local buffer in stk8312_trigger_handler() and use data->buffer
instead for bulk reads.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:24:58 +01:00
Hartmut Knaack
dca5d28465 iio:accel:stk8312: code style cleanup
Adjust some indentation issues to make checkpatch.pl happy in strict mode.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:24:09 +01:00
Hartmut Knaack
7d73e02c5d iio:accel:stk8312: use appropriate variable types
Adapt some variable types to reduce unnecessary casting.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:22:51 +01:00
Hartmut Knaack
03ecd50c50 iio:accel:stk8312: rework macro definitions
Make use of BIT to describe register bits, GENMASK for consecutive
bitmasks, rename and sort existing definitions, replace magic value with
an expressive definition, drop an unused definition.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:22:16 +01:00
Hartmut Knaack
18422bb3c1 iio:accel:stk8312: improve error handling
Improve error handling in the following ways:
  - set return value on error condition to an appropriate error code
  - return error code immediately in case of an error (slightly changes
    code structure)
  - pass up real error code
  - add missing error handling
  - return 0 when error have been caught already
  - put device back in active mode after error occurs

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-08 12:21:46 +01:00
Hartmut Knaack
b41e63cf83 iio:accel:stk8312: check for invalid value
Revision 1.2 of the datasheet recommends on page 22 to only write non-zero
values read from OTP register 0x70 into AFECTRL register.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 19:13:49 +01:00
Hartmut Knaack
946448e08e iio:accel:stk8312: add triggered buffer dependency
Add the still missing dependencies for triggered buffer support.

Fixes: 	95c12bba51 ("iio: accel: Add buffer mode for Sensortek STK8312")

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Reviewed-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 19:12:07 +01:00
Hartmut Knaack
546384c968 iio:adc:berlin2-adc: use channel-array size directly
Drop the otherwise unused definition of the channel-array size and use it
directly in _probe - makes it a bit more obvious.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 19:08:45 +01:00
Hartmut Knaack
609e9d88f2 iio:adc:berlin2-adc: use short operator format
Use augmented assignment to subtract the offset for negative temperature
values.
Specify the amount of private data to be allocated through
devm_iio_device_alloc() with sizeof(*priv), as it is shorter and common
practice in IIO.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 19:08:13 +01:00
Hartmut Knaack
688febbd16 iio:adc:berlin2-adc: constify iio_chan_spec
Mark berlin2_adc_channels array as constant.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 19:07:50 +01:00
Hartmut Knaack
19d566420b iio:adc:berlin2-adc: pass up real error code
Pass up the real error code returned by platform_get_irq_byname().

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 19:05:51 +01:00
Cristina Opriceana
a316c01d59 iio: event: Add missing fields in kernel docs
Fix kernel docs warnings by adding the missing fields,
each with its associated description.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:33:42 +01:00
Cristina Opriceana
0123635a77 iio: buffer: Fix kernel docs warnings
Fix kernel docs for structures and functions in order to
remove some warnings when the documentation gets generated.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:27:09 +01:00
Cristina Opriceana
2498dcf6e0 iio: core: Add function params for kernel docs
This patch adds the missing fields in kernel docs to remove
some warnings that appear when the IIO Documentation DocBook
is generated.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:24:39 +01:00
Irina Tirdea
5ab744d0d6 iio: magn: bmc150_magn: do not set power state twice when setting trigger state
When setting the trigger state, the device power state is set through
buffer preenable and postdisable hooks. There is no need
to also set it in the trigger set state call.

Remove duplicate set power state from the trigger set
state call.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:19:57 +01:00
Irina Tirdea
019cc46d0a iio: magn: bmc150_magn: add locking comment for runtime resume
Runtime resume function is called with the data->mutex lock held.
Add a comment to indicate this.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:18:59 +01:00
Hartmut Knaack
1506f3cd0b iio:magnetometer:bmc150_magn: use descriptive name for mask
Define and use a descriptive name for the repetition registers data mask,
instead of a 'magic' value.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:04:29 +01:00
Hartmut Knaack
3021678a94 iio:magnetometer:bmc150_magn: expand mutex in trigger_handler
Keep the mutex locked, until the content of data->buffer has been pushed
out.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 18:03:30 +01:00
Crt Mori
f9ba1ab4d1 iio: mlx90614: Define magic numbers
Translates the magic constant numbers to named macros and add some
additional comments about their meaning.

The diff is made towards togreg branch as that branch seems to have the
most recent updates of mlx90614 driver (many are yet to be merged).

Signed-off-by: Crt Mori <cmo@melexis.com>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 17:50:15 +01:00
Teodora Baluta
9e35d366a1 iio: mmc35240: minor change to improve code readibility
This patch changes two variables to arrays to improve code readibility.

Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 17:35:11 +01:00
Javier Martinez Canillas
119c4fce68 iio: Export OF module alias information in missing drivers
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So technically there's no need for a driver to export
the OF table since currently it's not used.

In fact, the I2C device ID table is mandatory for I2C drivers since
a i2c_device_id is passed to the driver's probe function even if the
I2C core used the OF table to match the driver.

And since the I2C core uses different tables, OF-only drivers needs to
have duplicated data that has to be kept in sync and also the dev node
compatible manufacturer prefix is stripped when reporting the MODALIAS.

To avoid the above, the I2C core behavior may be changed in the future
to not require an I2C device table for OF-only drivers and report the
OF module alias. So, it's better to also export the OF table to prevent
breaking module autoloading if that happens.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 16:36:00 +01:00
Javier Martinez Canillas
58e446fcc6 iio: Export I2C module alias information in missing drivers
The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-02 16:35:01 +01:00
Greg Kroah-Hartman
6e64e22449 Merge 4.2-rc4 into staging-next
We want the iio and other fixes in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 11:10:05 -07:00
Giuseppe Barba
1e9676a847 iio: st-magn: add support for lsm303agr magnetometer
This adds support for the lsm303agr magnetometer.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:27 +01:00
Giuseppe Barba
ddc05fa286 iio: st-accel: add support for lsm303agr accelerometer
This adds support for the lsm303agr accelerometer.

Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-23 20:43:22 +01:00