Fix the following fallthrough warning (arm64-randconfig with Clang):
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:382:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller
driver cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining
management interfaces and communication (including bus model)
between partitions both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal
with identity mappings at boot and integration with ARM SMMU
pieces.
-----BEGIN PGP SIGNATURE-----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=kPg8
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Including:
- SMMU Updates from Will Deacon:
- SMMUv3: Support stalling faults for platform devices
- SMMUv3: Decrease defaults sizes for the event and PRI queues
- SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia
- SMMUv2: Even more Qualcomm compatible strings
- SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU:
available on x86
- Add the amd_iommu=force_enable command line option to
enable the IOMMU on platforms where they are known to cause
problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
-----BEGIN PGP SIGNATURE-----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=IxNB
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- SMMU Updates from Will Deacon:
- SMMUv3:
- Support stalling faults for platform devices
- Decrease defaults sizes for the event and PRI queues
- SMMUv2:
- Support for a new '->probe_finalize' hook, needed by Nvidia
- Even more Qualcomm compatible strings
- Avoid Adreno TTBR1 quirk for DB820C platform
- Intel VT-d updates from Lu Baolu:
- Convert Intel IOMMU to use sva_lib helpers in iommu core
- ftrace and debugfs supports for page fault handling
- Support asynchronous nested capabilities
- Various misc cleanups
- Support for new VIOT ACPI table to make the VirtIO IOMMU
available on x86
- Add the amd_iommu=force_enable command line option to enable
the IOMMU on platforms where they are known to cause problems
- Support for version 2 of the Rockchip IOMMU
- Various smaller fixes, cleanups and refactorings
* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu/virtio: Enable x86 support
iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
ACPI: Add driver for the VIOT table
ACPI: Move IOMMU setup code out of IORT
ACPI: arm64: Move DMA setup operations out of IORT
iommu/vt-d: Fix dereference of pointer info before it is null checked
iommu: Update "iommu.strict" documentation
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu-v3: Remove unnecessary oom message
iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
iommu/vt-d: Fix linker error on 32-bit
iommu/vt-d: No need to typecast
iommu/vt-d: Define counter explicitly as unsigned int
iommu/vt-d: Remove unnecessary braces
iommu/vt-d: Removed unused iommu_count in dmar domain
iommu/vt-d: Use bitfields for DMAR capabilities
iommu/vt-d: Use DEVICE_ATTR_RO macro
iommu/vt-d: Fix out-bounds-warning in intel/svm.c
iommu/vt-d: Add PRQ handling latency sampling
...
With the VIOT support in place, x86 platforms can now use the
virtio-iommu.
Because the other x86 IOMMU drivers aren't yet ready to use the
acpi_dma_setup() path, x86 doesn't implement arch_setup_dma_ops() at the
moment. Similarly to Vt-d and AMD IOMMU, clear the DMA ops and call
iommu_setup_dma_ops() from probe_finalize().
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-6-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a 64-bit address width to iommu_setup_dma_ops() is valid on
virtual platforms, but isn't currently possible. The overflow check in
iommu_dma_init_domain() prevents this even when @dma_base isn't 0. Pass
a limit address instead of a size, so callers don't have to fake a size
to work around the check.
The base and limit parameters are being phased out, because:
* they are redundant for x86 callers. dma-iommu already reserves the
first page, and the upper limit is already in domain->geometry.
* they can now be obtained from dev->dma_range_map on Arm.
But removing them on Arm isn't completely straightforward so is left for
future work. As an intermediate step, simplify the x86 callers by
passing dummy limits.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
* devcoredump support for display errors
* dpu: irq cleanup/refactor
* dpu: dt bindings conversion to yaml
* dsi: dt bindings conversion to yaml
* mdp5: alpha/blend_mode/zpos support
* a6xx: cached coherent buffer support
* a660 support
* gpu iova fault improvements:
- info about which block triggered the fault, etc
- generation of gpu devcoredump on fault
* assortment of other cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs4=qsGBBbyn-4JWqW4-YUSTKh67X3DsPQ=T2D9aXKqNA@mail.gmail.com
Add, via the adreno-smmu-priv interface, a way for the GPU to request
the SMMU to stall translation on faults, and then later resume the
translation, either retrying or terminating the current translation.
This will be used on the GPU side to "freeze" the GPU while we snapshot
useful state for devcoredump.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a callback in adreno-smmu-priv to read interesting SMMU
registers to provide an opportunity for a richer debug experience
in the GPU driver.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Call report_iommu_fault() to allow upper-level drivers to register their
own fault handlers.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The assignment of iommu from info->iommu occurs before info is null checked
hence leading to a potential null pointer dereference issue. Fix this by
assigning iommu and checking if iommu is null after null checking info.
Addresses-Coverity: ("Dereference before null check")
Fixes: 4c82b88696 ("iommu/vt-d: Allocate/register iopf queue for sva devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210611135024.32781-1-colin.king@canonical.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- SMMUv3:
* Support stalling faults for platform devices
* Decrease defaults sizes for the event and PRI queues
- SMMUv2:
* Support for a new '->probe_finalize' hook, needed by Nvidia
* Even more Qualcomm compatible strings
* Avoid Adreno TTBR1 quirk for DB820C platform
- Misc:
* Trivial cleanups/refactoring
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmDJ1GkQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPIRCAC5ia+H1CHxjWRDmn7A++6/mNMu3hRKJCFj
WqKkz6Af3BcYEbuZeflHEp7BgHUo9r0FdhcMyz7pPRfBDpqP+eRmTxfDtJFThkn4
uwQmL4E8CbYnZUOQC8uvj87JG/7AgtC4Yu1XNpux2i7PYDKIW+BsW1Sla62Sa4aQ
LDuowqWZwgAkLyRSfEa4xmmlD8FN9tSrPkZBM3G1t9ixyl2LFBRhrePpirSMe8X8
xolCg209fYq1G5DJlYmKwsuNU+eEAVc8HQJzucnOJlqSbHhxezWbKTiyp3H3FSoV
4B2+CQAPGZCCti86yT0F2Ha+p4LWoKvWb12rb7eFTrJGEA1bVDmi
=PNoV
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.14
- SMMUv3:
* Support stalling faults for platform devices
* Decrease defaults sizes for the event and PRI queues
- SMMUv2:
* Support for a new '->probe_finalize' hook, needed by Nvidia
* Even more Qualcomm compatible strings
* Avoid Adreno TTBR1 quirk for DB820C platform
- Misc:
* Trivial cleanups/refactoring
Merge in support for the Arm SMMU '->probe_finalize()' implementation
callback, which is required to prevent early faults in conjunction with
Nvidia's memory controller.
* for-thierry/arm-smmu:
iommu/arm-smmu: Check smmu->impl pointer before dereferencing
iommu/arm-smmu: Implement ->probe_finalize()
Commit 0d97174aea ("iommu/arm-smmu: Implement ->probe_finalize()")
added a new optional ->probe_finalize callback to 'struct arm_smmu_impl'
but neglected to check that 'smmu->impl' is present prior to checking
if the new callback is present.
Add the missing check, which avoids dereferencing NULL when probing an
SMMU which doesn't require any implementation-specific callbacks:
| Unable to handle kernel NULL pointer dereference at virtual address
| 0000000000000070
|
| Call trace:
| arm_smmu_probe_finalize+0x14/0x48
| of_iommu_configure+0xe4/0x1b8
| of_dma_configure_id+0xf8/0x2d8
| pci_dma_configure+0x44/0x88
| really_probe+0xc0/0x3c0
Fixes: 0d97174aea ("iommu/arm-smmu: Implement ->probe_finalize()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210609125438.14369-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The reference counting issue happens in several exception handling paths
of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the
function forgets to decrease the refcount of "smmu" increased by
arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by jumping to "out" label when those error scenarios
occur.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/1623293391-17261-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the
refcount of the "smmu" even though the return value is less than 0.
The reference counting issue happens in some error handling paths of
arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get()
fails, the caller functions forget to decrease the refcount of "smmu"
increased by arm_smmu_rpm_get(), causing a refcount leak.
Fix this issue by calling pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount
balanced in case of failure.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1623293672-17954-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
Tegra186 requires the same SID override programming as Tegra194 in order
to seamlessly transition from the firmware framebuffer to the Linux
framebuffer, so the Tegra implementation needs to be used on Tegra186
devices as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-7-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The secure firmware keeps some SID override registers set as passthrough
in order to allow devices such as the display controller to operate with
no knowledge of SMMU translations until an operating system driver takes
over. This is needed in order to seamlessly transition from the firmware
framebuffer to the OS framebuffer.
Upon successfully attaching a device to the SMMU and in the process
creating identity mappings for memory regions that are being accessed,
the Tegra implementation will call into the memory controller driver to
program the override SIDs appropriately.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-6-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Parse the reg property in device tree and detect the number of instances
represented by a device tree node. This is subsequently needed in order
to support single-instance SMMUs with the Tegra implementation because
additional programming is needed to properly configure the SID override
registers in the memory controller.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-5-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Pull ARM SMMU driver change from Will Deacon to resolve dependencies
between memory controllers, Tegra ARM SoC and ARM SMMU drivers trees.
Further ARM SMMU changes for Tegra depend on the change in Will's tree
and on Tegra memory controllers drivers work done before by Thierry
Reding. Pulling Will's tree allows to apply the rest of this ARM SMMU
Tegra work via memory controllers drivers tree.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
A recent commit broke the build on 32-bit x86. The linker throws these
messages:
ld: drivers/iommu/intel/perf.o: in function `dmar_latency_snapshot':
perf.c:(.text+0x40c): undefined reference to `__udivdi3'
ld: perf.c:(.text+0x458): undefined reference to `__udivdi3'
The reason are the 64-bit divides in dmar_latency_snapshot(). Use the
div_u64() helper function for those.
Fixes: 55ee5e67a5 ("iommu/vt-d: Add common code for dmar latency performance monitors")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210610083120.29224-1-joro@8bytes.org
DMAR domain uses per DMAR refcount. It is indexed by iommu seq_id.
Older iommu_count is only incremented and decremented but no decisions
are taken based on this refcount. This is not of much use.
Hence, remove iommu_count and further simplify domain_detach_iommu()
by returning void.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210530075053.264218-1-parav@nvidia.com
Link: https://lore.kernel.org/r/20210610020115.1637656-21-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace a couple of calls to memcpy() with simple assignments in order
to fix the following out-of-bounds warning:
drivers/iommu/intel/svm.c:1198:4: warning: 'memcpy' offset [25, 32] from
the object at 'desc' is out of the bounds of referenced subobject
'qw2' with type 'long long unsigned int' at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &desc.qw2 and &resp.qw2, respectively.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210414201403.GA392764@embeddedor
Link: https://lore.kernel.org/r/20210610020115.1637656-18-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A debugfs interface /sys/kernel/debug/iommu/intel/dmar_perf_latency is
created to control and show counts of execution time ranges for various
types per DMAR. The interface may help debug any potential performance
issue.
By default, the interface is disabled.
Possible write value of /sys/kernel/debug/iommu/intel/dmar_perf_latency
0 - disable sampling all latency data
1 - enable sampling IOTLB invalidation latency data
2 - enable sampling devTLB invalidation latency data
3 - enable sampling intr entry cache invalidation latency data
4 - enable sampling prq handling latency data
Read /sys/kernel/debug/iommu/intel/dmar_perf_latency gives a snapshot
of sampling result of all enabled monitors.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210520031531.712333-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-15-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The execution time of some operations is very performance critical, such
as cache invalidation and PRQ processing time. This adds some common code
to monitor the execution time range of those operations. The interfaces
include enabling/disabling, checking status, updating sampling data and
providing a common string format for users.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210520031531.712333-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-14-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current VT-d implementation supports nested translation only if all
underlying IOMMUs support the nested capability. This is unnecessary
as the upper layer is allowed to create different containers and set
them with different type of iommu backend. The IOMMU driver needs to
guarantee that devices attached to a nested mode iommu_domain should
support nested capabilility.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210517065701.5078-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver reports the DMA fault reason in a decimal number
while the VT-d specification uses a hexadecimal one. It's inconvenient
that users need to covert them everytime before consulting the spec.
Let's use hexadecimal number for a DMA fault reason.
The fault message uses 0xffffffff as PASID for DMA requests w/o PASID.
This is confusing. Tweak this by adding "NO_PASID" explicitly.
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210517065425.4953-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210610020115.1637656-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/iommu/intel/pasid.c follows this syntax, but
the content inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc:
warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210523143245.19040-1-yashsri421@gmail.com
Link: https://lore.kernel.org/r/20210610020115.1637656-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The struct acpi_platform_list and function acpi_match_platform_list()
defined in include/linux/acpi.h are available only when CONFIG_ACPI is
enabled. Add protection to fix the build issues with !CONFIG_ACPI.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210609015511.3955-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
This second version of the hardware block has a different bits
mapping for page table entries.
Add the ops matching to this new mapping.
Define a new compatible to distinguish it from the first version.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-5-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add internal ops to be able to handle incoming variant v2.
The goal is to keep the overall structure of the framework but
to allow to add the evolution of this hardware block.
The ops are global for a SoC because iommu domains are not
attached to a specific devices if they are for a virtuel device like
drm. Use a global variable shouldn't be since SoC usually doesn't
embedded different versions of the iommu hardware block.
If that happen one day a WARN_ON will be displayed at probe time.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-4-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function iommu_group_store_type() is the only caller of the static
function iommu_change_dev_def_domain() and has performed
"if (WARN_ON(!group))" detection before calling it. So the one here is
redundant.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210513075815.6382-1-thunder.leizhen@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If device registration fails, remove sysfs attribute
and if setting bus callbacks fails, unregister the device
and cleanup the sysfs attribute.
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Link: https://lore.kernel.org/r/20210608164559.204023-1-ameynarkhede03@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Adreno(GPU) SMMU and APSS(Application Processor SubSystem) SMMU
both implement "arm,mmu-500" in some QTI SoCs and to run through
adreno smmu specific implementation such as enabling split pagetables
support, we need to match the "qcom,adreno-smmu" compatible first
before apss smmu or else we will be running apps smmu implementation
for adreno smmu and the additional features for adreno smmu is never
set. For ex: we have "qcom,sc7280-smmu-500" compatible for both apps
and adreno smmu implementing "arm,mmu-500", so the adreno smmu
implementation is never reached because the current sequence checks
for apps smmu compatible(qcom,sc7280-smmu-500) first and runs that
specific impl and we never reach adreno smmu specific implementation.
Suggested-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/c42181d313fdd440011541a28cde8cd10fffb9d3.1623155117.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Will Deacon <will@kernel.org>
A recent commit introduced this section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x22a1f): Section mismatch in reference from the function detect_ivrs() to the variable .init.data:amd_iommu_force_enable
The reason is that detect_ivrs() is not marked __init while it should
be, because it is only called from another __init function. Mark
detect_ivrs() __init to get rid of the warning.
Fixes: b1e650db2c ("iommu/amd: Add amd_iommu=force_enable option")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210608122843.8413-1-joro@8bytes.org
Compiling the recent dma-iommu changes under 32-bit x86 triggers this
compile warning:
drivers/iommu/dma-iommu.c:249:5: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
The reason is that %llx is used to print a variable of type
phys_addr_t. Fix it by using the correct %pa format specifier for
phys_addr_t.
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Fixes: 571f316074 ("iommu/dma: Fix IOVA reserve dma ranges")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210607124905.27525-1-joro@8bytes.org
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it
from everywhere else.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
of_get_dma_window() was added in 2012 and removed in 2014 in commit
8918465163 ("memory: Add NVIDIA Tegra memory controller support").
Remove it and simplify the header to use forward declarations for
structs rather than includes.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210527193710.1281746-1-robh@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is not necessary to put free_iova_mem() inside of spinlock/unlock
iova_rbtree_lock which only leads to more completion for the spinlock.
It has a small promote on the performance after the change. And also
rename private_free_iova() as remove_iova() because the function will not
free iova after that change.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1620647582-194621-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix IOVA reserve failure in the case when address of first memory region
listed in dma-ranges is equal to 0x0.
Fixes: aadad097cd ("iommu/dma: Reserve IOVA for PCIe inaccessible DMA address")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20200914072319.6091-1-srinath.mannam@broadcom.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit d25f6ead16 ("iommu/arm-smmu-v3: Increase maximum size of queues")
expands the cmdq queue size to improve the success rate of concurrent
command queue space allocation by multiple cores. However, this extension
does not apply to evtq and priq, because for both of them, the SMMU driver
is the consumer. Instead, memory resources are wasted. Therefore, the
queue size of evtq and priq is restored to the original setting, one page.
Fixes: d25f6ead16 ("iommu/arm-smmu-v3: Increase maximum size of queues")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210531123553.9602-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When a device or driver misbehaves, it is possible to receive DMA fault
events much faster than we can print them out, causing a lock up of the
system and inability to cancel the source of the problem. Ratelimit
printing of events to help recovery.
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210531095648.118282-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
The SMMU provides a Stall model for handling page faults in platform
devices. It is similar to PCIe PRI, but doesn't require devices to have
their own translation cache. Instead, faulting transactions are parked
and the OS is given a chance to fix the page tables and retry the
transaction.
Enable stall for devices that support it (opt-in by firmware). When an
event corresponds to a translation error, call the IOMMU fault handler.
If the fault is recoverable, it will call us back to terminate or
continue the stall.
To use stall device drivers need to enable IOMMU_DEV_FEAT_IOPF, which
initializes the fault queue for the device.
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210526161927.24268-4-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
db820c wants to use the qcom smmu path to get HUPCF set (which keeps
the GPU from wedging and then sometimes wedging the kernel after a
page fault), but it doesn't have separate pagetables support yet in
drm/msm so we can't go all the way to the TTBR1 path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210326231303.3071950-1-eric@anholt.net
Signed-off-by: Will Deacon <will@kernel.org>
Implement a ->probe_finalize() callback that can be used by vendor
implementations to perform extra programming necessary after devices
have been attached to the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-4-thierry.reding@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X
based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X.
Define acpi_platform_list for these platforms and match them using
acpi_match_platform_list() call, and create qcom_smmu_impl accordingly.
(np == NULL) is used to check ACPI boot, because fwnode of SMMU device
is a static allocation and thus helpers like has_acpi_companion() don't
work here.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210509022607.17534-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that DMA ops are part of the core API via iommu-dma, fold the
vestigial remains of the IOMMU_DMA_OPS init state into the IOMMU API
phase, and clean up a few other leftovers. This should also close the
race window wherein bus_set_iommu() effectively makes the DMA ops state
visible before its nominal initialisation - it seems this was previously
fairly benign, but since commit a250c23f15 ("iommu: remove
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE") it can now lead to the strict flush
queue policy inadvertently being picked for default domains allocated
during that window, with a corresponding unexpected perfomance impact.
Reported-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Fixes: a250c23f15 ("iommu: remove DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE")
Link: https://lore.kernel.org/r/665db61e23ff8d54ac5eb391bef520b3a803fcb9.1622727974.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add this option to enable the IOMMU on platforms like AMD Stoney,
where the kernel usually disables it because it may cause problems in
some scenarios.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210603130203.29016-1-joro@8bytes.org
print_iommu_info prints the EFR register and then the decoded list of
features on a separate line:
pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
The second line is emitted via 'pr_cont', which causes it to have a
different ('warn') loglevel compared to the previous line ('info').
Commit 9a295ff0ff attempted to rectify this by removing the newline
from the pci_info format string, but this doesn't work, as pci_info
calls implicitly append a newline anyway.
Printing the decoded features on the same line would make it quite long.
Instead, change pci_info() to pr_info() to omit PCI bus location info,
which is also shown in the preceding message. This results in:
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
Fixes: 9a295ff0ff ("iommu/amd: Print extended features in one line to fix divergent log levels")
Link: https://lore.kernel.org/lkml/alpine.LNX.2.20.13.2104112326460.11104@monopod.intra.ispras.ru
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210504102220.1793-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Subsequent patches will add more register fields to the tegra_mc_client
structure, so consolidate all register field definitions into a common
sub-structure for coherency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210602163302.120041-2-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210512064426.3440915-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210519015027.108468-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Fixes: fa4afd78ea ("iommu/virtio: Build virtio-iommu as module")
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210508031451.53493-1-cuibixuan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The logic to determine the mask of page-specific invalidations was
tested in userspace. As the code was copied into the kernel, the
parentheses were mistakenly set in the wrong place, resulting in the
wrong mask.
Fix it.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Fixes: 268aa45482 ("iommu/amd: Page-specific invalidations for more than one page")
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210502070001.1559127-2-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 08a27c1c3e ("iommu: Add support to change default domain
of an iommu group") a user can switch a device between IOMMU and direct
DMA through sysfs. This doesn't work for AMD IOMMU at the moment because
dev->dma_ops is not cleared when switching from a DMA to an identity
IOMMU domain. The DMA layer thus attempts to use the dma-iommu ops on an
identity domain, causing an oops:
# echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/unbind
# echo identity > /sys/bus/pci/devices/0000:00:05.0/iommu_group/type
# echo 0000:00:05.0 > /sys/sys/bus/pci/drivers/e1000e/bind
...
BUG: kernel NULL pointer dereference, address: 0000000000000028
...
Call Trace:
iommu_dma_alloc
e1000e_setup_tx_resources
e1000e_open
Since iommu_change_dev_def_domain() calls probe_finalize() again, clear
the dma_ops there like Vt-d does.
Fixes: 08a27c1c3e ("iommu: Add support to change default domain of an iommu group")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210422094216.2282097-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright noice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
-----BEGIN PGP SIGNATURE-----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=DJoy
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add a new dma_alloc_noncontiguous API (me, Ricardo Ribalda)
- fix a copyright notice (Hao Fang)
- add an unlikely annotation to dma_mapping_error (Heiner Kallweit)
- remove a pointless empty line (Wang Qing)
- add support for multi-pages map/unmap bencharking (Xiang Chen)
* tag 'dma-mapping-5.13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: add unlikely hint to error path in dma_mapping_error
dma-mapping: benchmark: Add support for multi-pages map/unmap
dma-mapping: benchmark: use the correct HiSilicon copyright
dma-mapping: remove a pointless empty line in dma_alloc_coherent
media: uvcvideo: Use dma_alloc_noncontiguous API
dma-iommu: implement ->alloc_noncontiguous
dma-iommu: refactor iommu_dma_alloc_remap
dma-mapping: add a dma_alloc_noncontiguous API
dma-mapping: refactor dma_{alloc,free}_pages
dma-mapping: add a dma_mmap_pages helper
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It happens that the 3 drivers which first supported being modular are
also ones which play games with their pgsize_bitmap, so have non-const
iommu_ops where dynamically setting the owner manages to work out OK.
However, it's less than ideal to force that upon all drivers which want
to be modular - like the new sprd-iommu driver which now has a potential
bug in that regard - so let's just statically set the module owner and
let ops remain const wherever possible.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/31423b99ff609c3d4b291c701a7a7a810d9ce8dc.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When this driver build as module, It build fail like:
ERROR: modpost: "of_phandle_iterator_args"
[drivers/iommu/mtk_iommu_v1.ko] undefined!
This patch remove this interface to avoid this build fail.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210412064843.11614-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The variable 'i' in the function update_liodn_stash() is not
initialized and only used in a debug printk(). So it has no
meaning at all, remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210415144442.25103-1-joro@8bytes.org
The translation caches may preserve obsolete data when the
mapping size is changed, suppose the following sequence which
can reveal the problem with high probability.
1.mmap(4GB,MAP_HUGETLB)
2.
while (1) {
(a) DMA MAP 0,0xa0000
(b) DMA UNMAP 0,0xa0000
(c) DMA MAP 0,0xc0000000
* DMA read IOVA 0 may failure here (Not present)
* if the problem occurs.
(d) DMA UNMAP 0,0xc0000000
}
The page table(only focus on IOVA 0) after (a) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x1a30a72003 entry:0xffff89b39cacb000
PTE: 0x21d200803 entry:0xffff89b3b0a72000
The page table after (b) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x1a30a72003 entry:0xffff89b39cacb000
PTE: 0x0 entry:0xffff89b3b0a72000
The page table after (c) is:
PML4: 0x19db5c1003 entry:0xffff899bdcd2f000
PDPE: 0x1a1cacb003 entry:0xffff89b35b5c1000
PDE: 0x21d200883 entry:0xffff89b39cacb000 (*)
Because the PDE entry after (b) is present, it won't be
flushed even if the iommu driver flush cache when unmap,
so the obsolete data may be preserved in cache, which
would cause the wrong translation at end.
However, we can see the PDE entry is finally switch to
2M-superpage mapping, but it does not transform
to 0x21d200883 directly:
1. PDE: 0x1a30a72003
2. __domain_mapping
dma_pte_free_pagetable
Set the PDE entry to ZERO
Set the PDE entry to 0x21d200883
So we must flush the cache after the entry switch to ZERO
to avoid the obsolete info be preserved.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Fixes: 6491d4d028 ("intel-iommu: Free old page tables before creating superpage")
Cc: <stable@vger.kernel.org> # v3.0+
Link: https://lore.kernel.org/linux-iommu/670baaf8-4ff8-4e84-4be3-030b95ab5a5e@huawei.com/
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210415004628.1779-1-longpeng2@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit f68c7f539b ("iommu/vt-d: Enable write protect for supervisor
SVM") added pasid_enable_wpe() which hit below compile error with !X86.
../drivers/iommu/intel/pasid.c: In function 'pasid_enable_wpe':
../drivers/iommu/intel/pasid.c:554:22: error: implicit declaration of function 'read_cr0' [-Werror=implicit-function-declaration]
554 | unsigned long cr0 = read_cr0();
| ^~~~~~~~
In file included from ../include/linux/build_bug.h:5,
from ../include/linux/bits.h:22,
from ../include/linux/bitops.h:6,
from ../drivers/iommu/intel/pasid.c:12:
../drivers/iommu/intel/pasid.c:557:23: error: 'X86_CR0_WP' undeclared (first use in this function)
557 | if (unlikely(!(cr0 & X86_CR0_WP))) {
| ^~~~~~~~~~
../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
78 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
../drivers/iommu/intel/pasid.c:557:23: note: each undeclared identifier is reported only once for each function it appears in
557 | if (unlikely(!(cr0 & X86_CR0_WP))) {
| ^~~~~~~~~~
../include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
78 | # define unlikely(x) __builtin_expect(!!(x), 0)
|
Add the missing dependency.
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f68c7f539b ("iommu/vt-d: Enable write protect for supervisor SVM")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20210411062312.3057579-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9c ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210409085848.3908-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit 6778ff5b21.
The original commit tries to address an issue, where PMC power-gating
causing the IOMMU PMC pre-init test to fail on certain desktop/mobile
platforms where the power-gating is normally enabled.
There have been several reports that the workaround still does not
guarantee to work, and can add up to 100 ms (on the worst case)
to the boot process on certain platforms such as the MSI B350M MORTAR
with AMD Ryzen 3 2200G.
Therefore, revert this commit as a prelude to removing the pre-init
test.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210409085848.3908-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'devid' has been checked in function check_device, no need to double
check and clean up this.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1617939040-35579-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The initialization of 'fault_addr' local variable is not needed as it is
shortly after overwritten.
Addresses-Coverity: Unused value
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210408201622.78009-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, IOMMU invalidations and device-IOTLB invalidations using
AMD IOMMU fall back to full address-space invalidation if more than a
single page need to be flushed.
Full flushes are especially inefficient when the IOMMU is virtualized by
a hypervisor, since it requires the hypervisor to synchronize the entire
address-space.
AMD IOMMUs allow to provide a mask to perform page-specific
invalidations for multiple pages that match the address. The mask is
encoded as part of the address, and the first zero bit in the address
(in bits [51:12]) indicates the mask size.
Use this hardware feature to perform selective IOMMU and IOTLB flushes.
Combine the logic between both for better code reuse.
The IOMMU invalidations passed a smoke-test. The device IOTLB
invalidations are untested.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210323210619.513069-1-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Per SMMUv3 spec, there is no Size and Addr field in the PREFETCH_CONFIG
command and they're not used by the driver. Remove them.
We can add them back if we're going to use PREFETCH_ADDR in the future.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20210407084448.1838-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
When a present pasid entry is disassembled, all kinds of pasid related
caches need to be flushed. But when a pasid entry is not being used
(PRESENT bit not set), we don't need to do this. Check the PRESENT bit
in intel_pasid_tear_down_entry() and avoid flushing caches if it's not
set.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the Intel IOMMU is operating in the scalable mode, some information
from the root and context table may be used to tag entries in the PASID
cache. Software should invalidate the PASID-cache when changing root or
context table entries.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Address field of the Page Request Descriptor only keeps bit [63:12]
of the offending address. Convert it to a full address before reporting
it to device drivers.
Fixes: eb8d93ea3c ("iommu/vt-d: Report page request faults for guest SVA")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A few functions that were intentended for the perf events support are
currently declared in arch/x86/events/amd/iommu.h, which mens they are
not in scope for the actual function definition. Also amdkfd has started
using a few of them using externs in a .c file. End that misery by
moving the prototypes to the proper header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove exports for functions that are only used in the AMD IOMMU driver
itself, or the also always builtin perf events support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit set_pgtable_quirks method instead that just passes
the actual quirk bitmask instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-20-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead make the global iommu_dma_strict paramete in iommu.c canonical by
exporting helpers to get and set it and use those directly in the drivers.
This make sure that the iommu.strict parameter also works for the AMD and
Intel IOMMU drivers on x86. As those default to lazy flushing a new
IOMMU_CMD_LINE_STRICT is used to turn the value into a tristate to
represent the default if not overriden by an explicit parameter.
[ported on top of the other iommu_attr changes and added a few small
missing bits]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-19-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use an explicit enable_nesting method instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-17-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The geometry information can be trivially queried from the iommu_domain
struture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-16-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
DOMAIN_ATTR_PAGING is never used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-15-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The win_addr and win_size parameters are always set to 0 and 1 << 36
respectively, so just hard code them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210401155256.298656-14-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The snoop_id is always set to ~(u32)0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-12-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of a separate call to enable all devices from the list, just
enable the liodn once the device is attached to the iommu domain.
This also remove the DOMAIN_ATTR_FSL_PAMU_ENABLE iommu_attr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-11-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No good reason to split this functionality over two functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-10-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge the two fuctions that configure the ppaace into a single coherent
function. I somehow doubt we need the two pamu_config_ppaace calls,
but keep the existing behavior just to be on the safe side.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-9-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly
instead of indirecting through the iommu attr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only thing that fsl_pamu_window_enable does for the current caller
is to fill in the prot value in the only dma_window structure, and to
propagate a few values from the iommu_domain_geometry struture into the
dma_window. Remove the dma_window entirely, hardcode the prot value and
otherwise use the iommu_domain_geometry structure instead.
Remove the now unused ->domain_window_enable iommu method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only domains allocated forces use of a single window. Remove all
the code related to multiple window support, as well as the need for
qman_portal to force a single window.
Remove the now unused DOMAIN_ATTR_WINDOWS iommu_attr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-6-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Keep the functionality to allocate the domain together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-5-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The default geometry is the same as the one set by qman_port given
that FSL_PAMU depends on having 64-bit physical and thus DMA addresses.
Remove the support to update the geometry and remove the now pointless
geom_size field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
None of the values returned by this function are ever queried. Also
remove the DOMAIN_ATTR_FSL_PAMUV1 enum value that is not otherwise used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-3-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
domain_window_disable is wired up by fsl_pamu, but never actually called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-2-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When handling faults from the event or PRI queue, we need to find the
struct device associated with a SID. Add a rb_tree to keep track of
SIDs.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210401154718.307519-8-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some systems allow devices to handle I/O Page Faults in the core mm. For
example systems implementing the PCIe PRI extension or Arm SMMU stall
model. Infrastructure for reporting these recoverable page faults was
added to the IOMMU core by commit 0c830e6b32 ("iommu: Introduce device
fault report API"). Add a page fault handler for host SVA.
IOMMU driver can now instantiate several fault workqueues and link them
to IOPF-capable devices. Drivers can choose between a single global
workqueue, one per IOMMU device, one per low-level fault queue, one per
domain, etc.
When it receives a fault event, most commonly in an IRQ handler, the
IOMMU driver reports the fault using iommu_report_device_fault(), which
calls the registered handler. The page fault handler then calls the mm
fault handler, and reports either success or failure with
iommu_page_response(). After the handler succeeds, the hardware retries
the access.
The iopf_param pointer could be embedded into iommu_fault_param. But
putting iopf_param into the iommu_param structure allows us not to care
about ordering between calls to iopf_queue_add_device() and
iommu_register_device_fault_handler().
Tested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-7-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allow drivers to query and enable IOMMU_DEV_FEAT_IOPF, which amounts to
checking whether PRI is enabled.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210401154718.307519-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid-num-bits property shouldn't need a dedicated fwspec field,
it's a job for device properties. Add properties for IORT, and access
the number of PASID bits using device_property_read_u32().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210401154718.307519-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The second parameter of clk_get_optional() is "const char *", so use NULL
instead of integer 0 to fix a sparse warning like:
">> drivers/iommu/sprd-iommu.c:456:42: sparse: sparse: Using plain integer as NULL pointer"
Also this patch changes to use the resource-managed variant of
clk_get_optional(), then there's no need to add clk_put() which
is missed in the current driver.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210331031645.1001913-1-zhang.lyra@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU in many SoC depends on the MM clocks and power-domain which
are device_initcall normally, thus the subsys_init here is not helpful.
This patch switches it to module_platform_driver which also allow the
driver built as module.
Correspondingly switch the config to tristate, and update the
iommu_ops's owner.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210326032337.24578-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch only adds support for building the IOMMU-v1 driver as module.
Correspondingly switch the config to tristate and update the iommu_ops's
owner to THIS_MODULE.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210326032337.24578-1-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function free_iova_fast() is only referenced by dma-iommu.c, which can
only be in-built, so stop exporting it.
This was missed in an earlier tidy-up patch.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1616675401-151997-5-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function iommu_dma_free_cpu_cached_iovas() no longer has any caller, so
delete it.
With that, function free_cpu_cached_iovas() may be made static.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1616675401-151997-4-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core code handles flushing per-IOVA domain CPU rcaches,
remove the handling here.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1616675401-151997-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Like the Intel IOMMU driver already does, flush the per-IOVA domain
CPU rcache when a CPU goes offline - there's no point in keeping it.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1616675401-151997-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some functions have been removed. Remove the remaining function
delarations.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323010600.678627-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The SVM_FLAG_PRIVATE_PASID has never been referenced in the tree, and
there's no plan to have anything to use it. So cleanup it.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323010600.678627-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The svm_dev_ops has never been referenced in the tree, and there's no
plan to have anything to use it. Remove it to make the code neat.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323010600.678627-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d specification (section 7.6) requires that the value in the
Private Data field of a Page Group Response Descriptor must match
the value in the Private Data field of the respective Page Request
Descriptor.
The private data field of a page group response descriptor is set then
immediately cleared in prq_event_thread(). This breaks the rule defined
by the VT-d specification. Fix it by moving clearing code up.
Fixes: 5b438f4ba3 ("iommu/vt-d: Support page request in scalable mode")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320024156.640798-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid_lock is used to synchronize different threads from modifying a
same pasid directory entry at the same time. It causes below lockdep splat.
[ 83.296538] ========================================================
[ 83.296538] WARNING: possible irq lock inversion dependency detected
[ 83.296539] 5.12.0-rc3+ #25 Tainted: G W
[ 83.296539] --------------------------------------------------------
[ 83.296540] bash/780 just changed the state of lock:
[ 83.296540] ffffffff82b29c98 (device_domain_lock){..-.}-{2:2}, at:
iommu_flush_dev_iotlb.part.0+0x32/0x110
[ 83.296547] but this lock took another, SOFTIRQ-unsafe lock in the past:
[ 83.296547] (pasid_lock){+.+.}-{2:2}
[ 83.296548]
and interrupts could create inverse lock ordering between them.
[ 83.296549] other info that might help us debug this:
[ 83.296549] Chain exists of:
device_domain_lock --> &iommu->lock --> pasid_lock
[ 83.296551] Possible interrupt unsafe locking scenario:
[ 83.296551] CPU0 CPU1
[ 83.296552] ---- ----
[ 83.296552] lock(pasid_lock);
[ 83.296553] local_irq_disable();
[ 83.296553] lock(device_domain_lock);
[ 83.296554] lock(&iommu->lock);
[ 83.296554] <Interrupt>
[ 83.296554] lock(device_domain_lock);
[ 83.296555]
*** DEADLOCK ***
Fix it by replacing the pasid_lock with an atomic exchange operation.
Reported-and-tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320020916.640115-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In arm_smmu_gerror_handler(), the value of the SMMU_GERROR register is
filtered by GERROR_ERR_MASK. However, the GERROR_ERR_MASK does not contain
the SFM bit. As a result, the subsequent error processing is not performed
when only the SFM error occurs.
Fixes: 48ec83bcbc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reported-by: Rui Zhu <zhurui3@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210324081603.1074-1-thunder.leizhen@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
VMD retransmits child device MSI-X with the VMD endpoint's requester-id.
In order to support direct interrupt remapping of VMD child devices,
ensure that the IRTE is programmed with the VMD endpoint's requester-id
using pci_real_dma_dev().
Link: https://lore.kernel.org/r/20210210161315.316097-2-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Page requests are originated from the user page fault. Therefore, we
shall set FAULT_FLAG_USER.
FAULT_FLAG_REMOTE indicates that we are walking an mm which is not
guaranteed to be the same as the current->mm and should not be subject
to protection key enforcement. Therefore, we should set FAULT_FLAG_REMOTE
to avoid faults when both SVM and PKEY are used.
References: commit 1b2ee1266e ("mm/core: Do not enforce PKEY permissions on remote mm access")
Reviewed-by: Raj Ashok <ashok.raj@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-5-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When supervisor/privilige mode SVM is used, we bind init_mm.pgd with
a supervisor PASID. There should not be any page fault for init_mm.
Execution request with DMA read is also not supported.
This patch checks PRQ descriptor for both unsupported configurations,
reject them both with invalid responses.
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-4-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In guest supervisor shared virtual addressing (SVA), write-protect
should be honored upon guest bind supervisor PASID request.
This patch extends the VT-d portion of the IOMMU UAPI to include WP bit.
WPE bit of the supervisor PASID entry will be set to match CPU CR0.WP bit.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-3-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In supervisor shared virtual addressing (SVA), where page tables
are shared between CPU and DMA, IOMMU PASID entry WPE bit should match
CR0.WP bit in the CPU.
This patch sets WPE bit for supervisor PASIDs if CR0.WP is set.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-2-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The tegra_smmu_probe_device() handles only the first IOMMU device-tree
phandle, skipping the rest. Devices like 3D module on Tegra30 have
multiple IOMMU phandles, one for each h/w block, and thus, only one
IOMMU phandle is added to fwspec for the 3D module, breaking GPU.
Previously this problem was masked by tegra_smmu_attach_dev() which
didn't use the fwspec, but parsed the DT by itself. The previous commit
to tegra-smmu driver partially reverted changes that caused problems for
T124 and now we have tegra_smmu_attach_dev() that uses the fwspec and
the old-buggy variant of tegra_smmu_probe_device() which skips secondary
IOMMUs.
Make tegra_smmu_probe_device() not to skip the secondary IOMMUs. This
fixes a partially attached IOMMU of the 3D module on Tegra30 and now GPU
works properly once again.
Fixes: 765a9d1d02 ("iommu/tegra-smmu: Fix mc errors on tegra124-nyan")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210312155439.18477-1-digetx@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the invalidation queue errors are encountered, dump the information
logged by the VT-d hardware together with the pending queue invalidation
descriptors.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210318005340.187311-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the Intel VT-d supports Shared Virtual Memory (SVM) only when
IO page fault is supported. Otherwise, shared memory pages can not be
swapped out and need to be pinned. The device needs the Address Translation
Service (ATS), Page Request Interface (PRI) and Process Address Space
Identifier (PASID) capabilities to be enabled to support IO page fault.
Disable SVM when ATS, PRI and PASID are not enabled in the device.
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210314201534.918-1-kyung.min.park@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When restarting after searching below the cached node fails, resetting
the start point to the anchor node is often overly pessimistic. If
allocations are made with mixed limits - particularly in the case of the
opportunistic 32-bit allocation for PCI devices - this could mean
significant time wasted walking through the whole populated upper range
just to reach the initial limit. We can improve on that by implementing
a proper tree traversal to find the first node above the relevant limit,
and set the exact start point.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/076b3484d1e5057b95d8c387c894bd6ad2514043.1614962123.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In converting intel-iommu over to the common IOMMU DMA ops, it quietly
lost the functionality of its "forcedac" option. Since this is a handy
thing both for testing and for performance optimisation on certain
platforms, reimplement it under the common IOMMU parameter namespace.
For the sake of fixing the inadvertent breakage of the Intel-specific
parameter, remove the dmar_forcedac remnants and hook it up as an alias
while documenting the transition to the new common parameter.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/7eece8e0ea7bfbe2cd0e30789e0d46df573af9b0.1614961776.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This IOMMU module can be used by Unisoc's multimedia devices, such as
display, Image codec(jpeg) and a few signal processors, including
VSP(video), GSP(graphic), ISP(image), and CPP(camera pixel processor), etc.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20210305093216.201897-3-zhang.lyra@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device iommu probe/attach might have failed leaving dev->iommu
to NULL and device drivers may still invoke these functions resulting
in a crash in iommu vendor driver code.
Hence make sure we check that.
Fixes: a3a195929d ("iommu: Add APIs for multiple domains per device")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210303173611.520-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Split swiotlb_tbl_sync_single into two separate funtions for the to device
and to cpu synchronization.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Now that swiotlb remembers the allocation size there is no need to pass
it back to swiotlb_tbl_unmap_single.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Implement support for allocating a non-contiguous DMA region.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Split out a new helper that only allocates a sg_table worth of
memory without mapping it into contiguous kernel address space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>
Including:
- Fix for a sleeping-while-atomic issue in the AMD IOMMU code
- Disabling lazy IOTLB flush for untrusted devices in the Intel VT-d driver
- Fix status code definitions for Intel VT-d
- Fix IO Page Fault issue in Tegra IOMMU driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmBCWZoACgkQK/BELZcB
GuMTHRAAxviCRgqwmnbxbUwB9kYboHaVy0FODIJuubHHQ1HlBlbBiebLxPidwsdK
xGTmc/d6QLOSA9puPbyxrtrI3B8H68A5NXTtyZlsCRvCvrJWzy7n9eTNRuH0FgEr
ZJkIn8JmrIy05UYGZUkV2HTxp5gifOcl21fc9ZvLZ2GMRadxI4P2cpY2nFEXDdb4
J128AcUEH2GQeMuD/+Ud5agZ0qtSZXGVUVY1jazfoa9Q/qi+NgKh9+CRL7nJV13q
yaGSsS5djvNAC4h/07DHU4tRNvGpgA6+w4Zmyh7alXnze/Ab9zw3QfExxMbJvpN3
wqgGRJphFDUSaS69d7/BJ/SR6YcGMFMK6MdWb4p8JufWGLSyqGGXCTbmNNptNmJR
W82cUKJrwBRTw2fFS0Z3qEOSk2ikaOjkPUg0lVh96NJbJSIxyhsfj8N20RJKbEqz
TaCIcm9RGIv9WsJ5mUGgV9frUFoRz3wtoEsoJyBj9It2X7O/sJpg58HQETF8QanD
llpM3ze82TfY6hE2CTVhL0FQHWgHDwihQBf3jvYGemeM2boqnEDc2HlExaZ5NTd5
LBew5Xg4kzFpzVOt2VyVDKa/9hhUqLmfOKCWDIFqGCarKgy6iIqxeZUGSyA5RqZ/
2GXVDa3Ac6Mwc3EPYk9KzfsoJSyIiuYRrkNb3/IVb1wFzz6Okho=
=KsdV
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a sleeping-while-atomic issue in the AMD IOMMU code
- Disable lazy IOTLB flush for untrusted devices in the Intel VT-d
driver
- Fix status code definitions for Intel VT-d
- Fix IO Page Fault issue in Tegra IOMMU driver
* tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix status code for Allocate/Free PASID command
iommu: Don't use lazy flush for untrusted device
iommu/tegra-smmu: Fix mc errors on tegra124-nyan
iommu/amd: Fix sleeping in atomic in increase_address_space()
As per Intel vt-d spec, Rev 3.0 (section 10.4.45 "Virtual Command Response
Register"), the status code of "No PASID available" error in response to
the Allocate PASID command is 2, not 1. The same for "Invalid PASID" error
in response to the Free PASID command.
We will otherwise see confusing kernel log under the command failure from
guest side. Fix it.
Fixes: 24f27d32ab ("iommu/vt-d: Enlightened PASID allocation")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210227073909.432-1-yuzenghui@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The lazy IOTLB flushing setup leaves a time window, in which the device
can still access some system memory, which has already been unmapped by
the device driver. It's not suitable for untrusted devices. A malicious
device might use this to attack the system by obtaining data that it
shouldn't obtain.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210225061454.2864009-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 25938c73cd ("iommu/tegra-smmu: Rework tegra_smmu_probe_device()")
removed certain hack in the tegra_smmu_probe() by relying on IOMMU core to
of_xlate SMMU's SID per device, so as to get rid of tegra_smmu_find() and
tegra_smmu_configure() that are typically done in the IOMMU core also.
This approach works for both existing devices that have DT nodes and other
devices (like PCI device) that don't exist in DT, on Tegra210 and Tegra3
upon testing. However, Page Fault errors are reported on tegra124-Nyan:
tegra-mc 70019000.memory-controller: display0a: read @0xfe056b40:
EMEM address decode error (SMMU translation error [--S])
tegra-mc 70019000.memory-controller: display0a: read @0xfe056b40:
Page fault (SMMU translation error [--S])
After debugging, I found that the mentioned commit changed some function
callback sequence of tegra-smmu's, resulting in enabling SMMU for display
client before display driver gets initialized. I couldn't reproduce exact
same issue on Tegra210 as Tegra124 (arm-32) differs at arch-level code.
Actually this Page Fault is a known issue, as on most of Tegra platforms,
display gets enabled by the bootloader for the splash screen feature, so
it keeps filling the framebuffer memory. A proper fix to this issue is to
1:1 linear map the framebuffer memory to IOVA space so the SMMU will have
the same address as the physical address in its page table. Yet, Thierry
has been working on the solution above for a year, and it hasn't merged.
Therefore, let's partially revert the mentioned commit to fix the errors.
The reason why we do a partial revert here is that we can still set priv
in ->of_xlate() callback for PCI devices. Meanwhile, devices existing in
DT, like display, will go through tegra_smmu_configure() at the stage of
bus_set_iommu() when SMMU gets probed(), as what it did before we merged
the mentioned commit.
Once we have the linear map solution for framebuffer memory, this change
can be cleaned away.
[Big thank to Guillaume who reported and helped debugging/verification]
Fixes: 25938c73cd ("iommu/tegra-smmu: Rework tegra_smmu_probe_device()")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210218220702.1962-1-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
increase_address_space() calls get_zeroed_page(gfp) under spin_lock with
disabled interrupts. gfp flags passed to increase_address_space() may allow
sleeping, so it comes to this:
BUG: sleeping function called from invalid context at mm/page_alloc.c:4342
in_atomic(): 1, irqs_disabled(): 1, pid: 21555, name: epdcbbf1qnhbsd8
Call Trace:
dump_stack+0x66/0x8b
___might_sleep+0xec/0x110
__alloc_pages_nodemask+0x104/0x300
get_zeroed_page+0x15/0x40
iommu_map_page+0xdd/0x3e0
amd_iommu_map+0x50/0x70
iommu_map+0x106/0x220
vfio_iommu_type1_ioctl+0x76e/0x950 [vfio_iommu_type1]
do_vfs_ioctl+0xa3/0x6f0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4e/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by moving get_zeroed_page() out of spin_lock/unlock section.
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210217143004.19165-1-arbn@yandex-team.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations,
which aren't used and will be replaced by a different API
-----BEGIN PGP SIGNATURE-----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=papz
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add support to emulate processing delays in the DMA API benchmark
selftest (Barry Song)
- remove support for non-contiguous noncoherent allocations, which
aren't used and will be replaced by a different API
* tag 'dma-mapping-5.12' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove the {alloc,free}_noncoherent methods
dma-mapping: benchmark: pretend DMA is transmitting
Including:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance
on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU (perf) driver to be built
independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic
IO-page-table framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI Support for Renesas IOMMU driver
- Misc Cleanups and other small improvments
-----BEGIN PGP SIGNATURE-----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=xSX1
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU perf driver to be built independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic IO-page-table
framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI support for Renesas IOMMU driver
- Misc cleanups and other small improvments
* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
iommu/amd: Fix performance counter initialization
MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
iommu/mediatek: Fix error code in probe()
iommu/mediatek: Fix unsigned domid comparison with less than zero
iommu/vt-d: Parse SATC reporting structure
iommu/vt-d: Add new enum value and structure for SATC
iommu/vt-d: Add iotlb_sync_map callback
iommu/vt-d: Move capability check code to cap_audit files
iommu/vt-d: Audit IOMMU Capabilities and add helper functions
iommu/vt-d: Fix 'physical' typos
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmArly8THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXkRfCADB0PA4xlfVF0Na/iZoBFdNFr3EMU4K
NddGJYyk0o+gipUIj2xu7TksVw8c1/cWilXOUBe7oZRKw2/fC/0hpDwvLpPtD/wP
+Tc2DcIgwquMvsSksyqpMOb0YjNNhWCx9A9xPWawpUdg20IfbK/ekRHlFI5MsEww
7tFS+MHY4QbsPv0WggoK61PGnhGCBt/85Lv4I08ZGohA6uirwC4fNIKp83SgFNtf
1hHbvpapAFEXwZiKFbzwpue20jWJg+tlTiEFpen3exjBICoagrLLaz3F0SZJvbxl
2YY32zbBsQe4Izre5PVuOlMoNFRom9NSzEzdZT10g7HNtVrwKVNLcohS
=MyO4
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- VMBus hardening patches from Andrea Parri and Andres Beltran.
- Patches to make Linux boot as the root partition on Microsoft
Hypervisor from Wei Liu.
- One patch to add a new sysfs interface to support hibernation on
Hyper-V from Dexuan Cui.
- Two miscellaneous clean-up patches from Colin and Gustavo.
* tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits)
Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"
iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition
x86/hyperv: implement an MSI domain for root partition
asm-generic/hyperv: import data structures for mapping device interrupts
asm-generic/hyperv: introduce hv_device_id and auxiliary structures
asm-generic/hyperv: update hv_interrupt_entry
asm-generic/hyperv: update hv_msi_entry
x86/hyperv: implement and use hv_smp_prepare_cpus
x86/hyperv: provide a bunch of helper functions
ACPI / NUMA: add a stub function for node_to_pxm()
x86/hyperv: handling hypercall page setup for root
x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary
x86/hyperv: allocate output arg pages if required
clocksource/hyperv: use MSR-based access if running as root
Drivers: hv: vmbus: skip VMBus initialization if Linux is root
x86/hyperv: detect if Linux is the root partition
asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT
hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate
hv_netvsc: Restrict configurations on isolated guests
Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests
...
Certain AMD platforms enable power gating feature for IOMMU PMC,
which prevents the IOMMU driver from updating the counter while
trying to validate the PMC functionality in the init_iommu_perf_ctr().
This results in disabling PMC support and the following error message:
"AMD-Vi: Unable to read/write to IOMMU perf counter"
To workaround this issue, disable power gating temporarily by programming
the counter source to non-zero value while validating the counter,
and restore the prior state afterward.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Tj (Elloe Linux) <ml.linux@elloe.vision>
Link: https://lore.kernel.org/r/20210208122712.5048-1-suravee.suthikulpanit@amd.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
Hypervisor when Linux runs as the root partition. Implement an IRQ
domain to handle mapping and unmapping of IO-APIC interrupts.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210203150435.27941-17-wei.liu@kernel.org
It turns out allowing non-contigous allocations here was a rather bad
idea, as we'll now need to define ways to get the pages for mmaping
or dma_buf sharing. Revert this change and stick to the original
concept. A different API for the use case of non-contigous allocations
will be added back later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Ricardo Ribalda <ribalda@chromium.org>:wq
This error path is supposed to return -EINVAL. It used to return
directly but we added some clean up and accidentally removed the
error code. Also I fixed a typo in the error message.
Fixes: c0b57581b7 ("iommu/mediatek: Add power-domain operation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/YB0+GU5akSdu29Vu@mwanda
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the check for domid < 0 is always false because domid
is unsigned. Fix this by casting domid to an int before making
the comparison.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210204150001.102672-1-colin.king@canonical.com
Addresses-Coverity: ("Unsigned comparison against 0")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some Intel VT-d hardware implementations don't support memory coherency
for page table walk (presented by the Page-Walk-coherency bit in the
ecap register), so that software must flush the corresponding CPU cache
lines explicitly after each page table entry update.
The iommu_map_sg() code iterates through the given scatter-gather list
and invokes iommu_map() for each element in the scatter-gather list,
which calls into the vendor IOMMU driver through iommu_ops callback. As
the result, a single sg mapping may lead to multiple cache line flushes,
which leads to the degradation of I/O performance after the commit
<c588072bba6b5> ("iommu/vt-d: Convert intel iommu driver to the iommu
ops").
Fix this by adding iotlb_sync_map callback and centralizing the clflush
operations after all sg mappings.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/linux-iommu/D81314ED-5673-44A6-B597-090E3CB83EB0@oracle.com/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
[ cel: removed @first_pte, which is no longer used ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/linux-iommu/161177763962.1311.15577661784296014186.stgit@manet.1015granger.net
Link: https://lore.kernel.org/r/20210204014401.2846425-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Audit IOMMU Capability/Extended Capability and check if the IOMMUs have
the consistent value for features. Report out or scale to the lowest
supported when IOMMU features have incompatibility among IOMMUs.
Report out features when below features are mismatched:
- First Level 5 Level Paging Support (FL5LP)
- First Level 1 GByte Page Support (FL1GP)
- Read Draining (DRD)
- Write Draining (DWD)
- Page Selective Invalidation (PSI)
- Zero Length Read (ZLR)
- Caching Mode (CM)
- Protected High/Low-Memory Region (PHMR/PLMR)
- Required Write-Buffer Flushing (RWBF)
- Advanced Fault Logging (AFL)
- RID-PASID Support (RPS)
- Scalable Mode Page Walk Coherency (SMPWC)
- First Level Translation Support (FLTS)
- Second Level Translation Support (SLTS)
- No Write Flag Support (NWFS)
- Second Level Accessed/Dirty Support (SLADS)
- Virtual Command Support (VCS)
- Scalable Mode Translation Support (SMTS)
- Device TLB Invalidation Throttle (DIT)
- Page Drain Support (PDS)
- Process Address Space ID Support (PASID)
- Extended Accessed Flag Support (EAFS)
- Supervisor Request Support (SRS)
- Execute Request Support (ERS)
- Page Request Support (PRS)
- Nested Translation Support (NEST)
- Snoop Control (SC)
- Pass Through (PT)
- Device TLB Support (DT)
- Queued Invalidation (QI)
- Page walk Coherency (C)
Set capability to the lowest supported when below features are mismatched:
- Maximum Address Mask Value (MAMV)
- Number of Fault Recording Registers (NFR)
- Second Level Large Page Support (SLLPS)
- Fault Recording Offset (FRO)
- Maximum Guest Address Width (MGAW)
- Supported Adjusted Guest Address Width (SAGAW)
- Number of Domains supported (NDOMS)
- Pasid Size Supported (PSS)
- Maximum Handle Mask Value (MHMV)
- IOTLB Register Offset (IRO)
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com
Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Sleeping while atomic = bad. Let's fix an obvious typo to try to avoid it.
The warning that was seen (on a downstream kernel with the problematic
patch backported):
BUG: sleeping function called from invalid context at mm/page_alloc.c:4726
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: ksoftirqd/0
CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.4.93-12508-gc10c93e28e39 #1
Call trace:
dump_backtrace+0x0/0x154
show_stack+0x20/0x2c
dump_stack+0xa0/0xfc
___might_sleep+0x11c/0x12c
__might_sleep+0x50/0x84
__alloc_pages_nodemask+0xf8/0x2bc
__arm_lpae_alloc_pages+0x48/0x1b4
__arm_lpae_map+0x124/0x274
__arm_lpae_map+0x1cc/0x274
arm_lpae_map+0x140/0x170
arm_smmu_map+0x78/0xbc
__iommu_map+0xd4/0x210
_iommu_map+0x4c/0x84
iommu_map_atomic+0x44/0x58
__iommu_dma_map+0x8c/0xc4
iommu_dma_map_page+0xac/0xf0
Fixes: d8c1df02ac ("iommu: Move iotlb_sync_map out from __iommu_map")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210201170611.1.I64a7b62579287d668d7c89e105dcedf45d641063@changeid
Signed-off-by: Joerg Roedel <jroedel@suse.de>
trace_qi_submit() could be used when interrupt remapping is supported,
but DMA remapping is not. In this case, the following compile error
occurs.
../drivers/iommu/intel/dmar.c: In function 'qi_submit_sync':
../drivers/iommu/intel/dmar.c:1311:3: error: implicit declaration of function 'trace_qi_submit';
did you mean 'ftrace_nmi_exit'? [-Werror=implicit-function-declaration]
trace_qi_submit(iommu, desc[i].qw0, desc[i].qw1,
^~~~~~~~~~~~~~~
ftrace_nmi_exit
Fixes: f2dd871799 ("iommu/vt-d: Add qi_submit trace event")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210130151907.3929148-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Merge in Mediatek support from Yong Wu which introduces significant
changes to the TLB invalidation and Arm short-descriptor code in the
io-pgtable layer.
* for-joerg/mtk: (40 commits)
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
iommu/mediatek: Add iova_region structure
iommu/mediatek: Move geometry.aperture updating into domain_finalise
iommu/mediatek: Move domain_finalise into attach_device
iommu/mediatek: Adjust the structure
iommu/mediatek: Support report iova 34bit translation fault in ISR
iommu/mediatek: Support up to 34bit iova in tlb flush
iommu/mediatek: Add power-domain operation
iommu/mediatek: Add pm runtime callback
iommu/mediatek: Add device link for smi-common and m4u
iommu/mediatek: Add error handle for mtk_iommu_probe
iommu/mediatek: Move hw_init into attach_device
iommu/mediatek: Update oas for v7s
iommu/mediatek: Add a flag for iova 34bits case
...
This priv_data is set in the of_xlate. if of_xlate failed, it should
not enter attach_device. remove the unnecessary check.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-32-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
After extending v7s, our pagetable already support iova reach
16GB(34bit). the master got the iova via dma_alloc_attrs may reach
34bits, but its HW register still is 32bit. then how to set the
bit32/bit33 iova? this depend on a SMI larb setting(bank_sel).
we separate whole 16GB iova to four banks:
bank: 0: 0~4G; 1: 4~8G; 2: 8-12G; 3: 12-16G;
The bank number is (iova >> 32).
We will preassign which bank the larbs belong to. currently we don't
have a interface for master to adjust its bank number.
Each a bank is a iova_region which is a independent iommu-domain.
the iova range for each iommu-domain can't cross 4G.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> #for memory part
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-31-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
For multiple iommu_domains, we need to reserve some iova regions. Take a
example, If the default iova region is 0 ~ 4G, but the 0x4000_0000 ~
0x43ff_ffff is only for the special CCU0 domain. Thus we should exclude
this region for the default iova region.
Signed-off-by: Anan sun <anan.sun@mediatek.com>
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-30-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Some HW IP(ex: CCU) require the special iova range. That means the iova
got from dma_alloc_attrs for that devices must locate in his special range.
In this patch, we prepare a iommu group(domain) for each a iova range
requirement.
Meanwhile we still use one pagetable which support 16GB iova.
After this patch, If the iova range of a master is over 4G, the master
should:
a) Declare its special dma-ranges in its dtsi node. For example, If we
preassign the iova 4G-8G for vcodec, then the vcodec dtsi node should
add this:
/*
* iova start at 0x1_0000_0000, pa still start at 0x4000_0000
* size is 0x1_0000_0000.
*/
dma-ranges = <0x1 0x0 0x0 0x40000000 0x1 0x0>; /* 4G ~ 8G */
Note: we don't have a actual bus concept here. the master doesn't have its
special parent node, thus this dma-ranges can only be put in the master's
node.
b) Update the dma_mask:
dma_set_mask_and_coherent(dev, DMA_BIT_MASK(33));
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-29-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a new interface _get_domain_id from dev->dma_range_map,
The iommu consumer device will use dma-ranges in dtsi node to indicate
its dma address region requirement. In this iommu driver, we will get
the requirement and decide which iova domain it should locate.
In the lastest SoC, there will be several iova-regions(domains), we will
compare and calculate which domain is right. If the start/end of device
requirement equal some region. it is best fit of course. If it is inside
some region, it is also ok. the iova requirement of a device should not
be inside two or more regions.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-28-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a new structure for the iova_region. Each a region will be a
independent iommu domain.
For the previous SoC, there is single iova region(0~4G). For the SoC
that need support multi-domains, there will be several regions.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-27-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Move the domain geometry.aperture updating into domain_finalise.
This is a preparing patch for updating the domain region. We know the
detailed iova region in the attach_device.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-26-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently domain_alloc only has a parameter(type), We have no chance to
input some special data. This patch moves the domain_finalise into
attach_device which has the device information, then could update
the domain's geometry.aperture ranges for each a device.
Strictly, I should use the data from mtk_iommu_get_m4u_data as the
parameter of mtk_iommu_domain_finalise in this patch. but dom->data
only is used in tlb ops in which the data is get from the m4u_list, thus
it is ok here.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-25-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add "struct mtk_iommu_data *" in the "struct mtk_iommu_domain",
reduce the call mtk_iommu_get_m4u_data().
No functional change.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-24-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
If the iova is over 32bit, the fault status register bit is a little
different.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-23-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
If the iova is 34bit, the iova[32][33] is the bit0/1 in the tlb flush
register. Add a new macro for this.
In the macro, since (iova + size - 1) may be end with 0xfff, then the
bit0/1 always is 1, thus add a mask.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-22-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the previous SoC, the M4U HW is in the EMI power domain which is
always on. the latest M4U is in the display power domain which may be
turned on/off, thus we have to add pm_runtime interface for it.
When the engine work, the engine always enable the power and clocks for
smi-larb/smi-common, then the M4U's power will always be powered on
automatically via the device link with smi-common.
Note: we don't enable the M4U power in iommu_map/unmap for tlb flush.
If its power already is on, of course it is ok. if the power is off,
the main tlb will be reset while M4U power on, thus the tlb flush while
m4u power off is unnecessary, just skip it.
Therefore, we increase the ref_count for pm when pm status is ACTIVE,
otherwise, skip it. Meanwhile, the tlb_flush_range is called so often,
thus, update pm ref_count while the SoC has power-domain to avoid touch the
dev->power.lock. and the tlb_flush_all only is called when boot, so no
need check if the SoC has power-domain to keep code clean.
There will be one case that pm runctime status is not expected when tlb
flush. After boot, the display may call dma_alloc_attrs before it call
pm_runtime_get(disp-dev), then the m4u's pm status is not active inside
the dma_alloc_attrs. Since it only happens after boot, the tlb is clean
at that time, I also think this is ok.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In pm runtime case, all the registers backup/restore and bclk are
controlled in the pm_runtime callback, Rename the original
suspend/resume to the runtime_suspend/resume.
Use pm_runtime_force_suspend/resume as the normal suspend/resume.
iommu should suspend after iommu consumer devices, thus use _LATE_.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-20-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the lastest SoC, M4U has its special power domain. thus, If the engine
begin to work, it should help enable the power for M4U firstly.
Currently if the engine work, it always enable the power/clocks for
smi-larbs/smi-common. This patch adds device_link for smi-common and M4U.
then, if smi-common power is enabled, the M4U power also is powered on
automatically.
Normally M4U connect with several smi-larbs and their smi-common always
are the same, In this patch it get smi-common dev from the last smi-larb
device, then add the device_link.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-19-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the original code, we lack the error handle. This patch adds them.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-18-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In attach device, it will update the pagetable base address register.
Move the hw_init function also here. Then it only need call
pm_runtime_get/put one time here if m4u has power domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-17-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
This patch only updates oas in different SoCs.
If the SoC supports 4GB-mode and current dram size is 4GB, the oas is 33.
otherwise, it's still 32. In the lastest SoC, the oas is 35bits.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-16-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a HW flag for if the HW support 34bit IOVA. the previous SoC
still use 32bit. normally the lvl1 pgtable size is 16KB when ias == 32.
if ias == 34, lvl1 pgtable size is 16KB * 4. The purpose of this patch
is to save 16KB*3 continuous memory for the previous SoC.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-15-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
The standard input iova bits is 32. MediaTek quad the lvl1 pagetable
(4 * lvl1). No change for lvl2 pagetable. Then the iova bits can reach
34bit.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-14-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Add "cfg" as a parameter for some macros. This is a preparing patch for
mediatek extend the lvl1 pgtable. No functional change.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-13-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
The current _ARM_V7S_LVL_BITS/ARM_V7S_LVL_SHIFT use a formula to calculate
the corresponding value for level1 and level2 to pretend the code sane.
Actually their level1 and level2 values are different from each other.
This patch only clarify the two macro. No functional change.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-12-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
MediaTek extend the bit5 in lvl1 and lvl2 descriptor as PA34.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-11-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the ias for the valid iova checking in arm_v7s_unmap. This is a
preparing patch for supporting iova 34bit for MediaTek.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-10-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the common memory header(larb-port) in the source code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20210111111914.22211-9-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
The VT-d IOMMU response RESPONSE_FAILURE for a page request in below
cases:
- When it gets a Page_Request with no PASID;
- When it gets a Page_Request with PASID that is not in use for this
device.
This is allowed by the spec, but IOMMU driver doesn't support such cases
today. When the device receives RESPONSE_FAILURE, it sends the device
state machine to HALT state. Now if we try to unload the driver, it hangs
since the device doesn't send any outbound transactions to host when the
driver is trying to clear things up. The only possible responses would be
for invalidation requests.
Let's use RESPONSE_INVALID instead for now, so that the device state
machine doesn't enter HALT state.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210126080730.2232859-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is incorrect to always clear PRO when it's set w/o first checking
whether the overflow condition has been cleared. Current code assumes
that if an overflow condition occurs it must have been cleared by earlier
loop. However since the code runs in a threaded context, the overflow
condition could occur even after setting the head to the tail under some
extreme condition. To be sane, we should read both head/tail again when
seeing a pending PRO and only clear PRO after all pending PRs have been
handled.
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/linux-iommu/MWHPR11MB18862D2EA5BD432BF22D99A48CA09@MWHPR11MB1886.namprd11.prod.outlook.com/
Link: https://lore.kernel.org/r/20210126080730.2232859-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
These implement map and unmap for AMD IOMMU v1 pagetable, which
will be used by the IO pagetable framework.
Also clean up unused extern function declarations.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201215073705.123786-13-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since the IO page table root and mode parameters have been moved into
the struct amd_io_pg, the function is no longer needed. Therefore,
remove it along with the struct domain_pgtable.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201215073705.123786-9-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
And move declaration to header file so that they can be included across
multiple files. There is no functional change.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201215073705.123786-6-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When an Intel IOMMU is virtualized, and a physical device is
passed-through to the VM, changes of the virtual IOMMU need to be
propagated to the physical IOMMU. The hypervisor therefore needs to
monitor PTE mappings in the IOMMU page-tables. Intel specifications
provide "caching-mode" capability that a virtual IOMMU uses to report
that the IOMMU is virtualized and a TLB flush is needed after mapping to
allow the hypervisor to propagate virtual IOMMU mappings to the physical
IOMMU. To the best of my knowledge no real physical IOMMU reports
"caching-mode" as turned on.
Synchronizing the virtual and the physical IOMMU tables is expensive if
the hypervisor is unaware which PTEs have changed, as the hypervisor is
required to walk all the virtualized tables and look for changes.
Consequently, domain flushes are much more expensive than page-specific
flushes on virtualized IOMMUs with passthrough devices. The kernel
therefore exploited the "caching-mode" indication to avoid domain
flushing and use page-specific flushing in virtualized environments. See
commit 78d5f0f500 ("intel-iommu: Avoid global flushes with caching
mode.")
This behavior changed after commit 13cf017446 ("iommu/vt-d: Make use
of iova deferred flushing"). Now, when batched TLB flushing is used (the
default), full TLB domain flushes are performed frequently, requiring
the hypervisor to perform expensive synchronization between the virtual
TLB and the physical one.
Getting batched TLB flushes to use page-specific invalidations again in
such circumstances is not easy, since the TLB invalidation scheme
assumes that "full" domain TLB flushes are performed for scalability.
Disable batched TLB flushes when caching-mode is on, as the performance
benefit from using batched TLB invalidations is likely to be much
smaller than the overhead of the virtual-to-physical IOMMU page-tables
synchronization.
Fixes: 13cf017446 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, because domain attach allows to be deferred from iommu
driver to device driver, and when iommu initializes, the devices
on the bus will be scanned and the default groups will be allocated.
Due to the above changes, some devices could be added to the same
group as below:
[ 3.859417] pci 0000:01:00.0: Adding to iommu group 16
[ 3.864572] pci 0000:01:00.1: Adding to iommu group 16
[ 3.869738] pci 0000:02:00.0: Adding to iommu group 17
[ 3.874892] pci 0000:02:00.1: Adding to iommu group 17
But when attaching these devices, it doesn't allow that a group has
more than one device, otherwise it will return an error. This conflicts
with the deferred attaching. Unfortunately, it has two devices in the
same group for my side, for example:
[ 9.627014] iommu_group_device_count(): device name[0]:0000:01:00.0
[ 9.633545] iommu_group_device_count(): device name[1]:0000:01:00.1
...
[ 10.255609] iommu_group_device_count(): device name[0]:0000:02:00.0
[ 10.262144] iommu_group_device_count(): device name[1]:0000:02:00.1
Finally, which caused the failure of tg3 driver when tg3 driver calls
the dma_alloc_coherent() to allocate coherent memory in the tg3_test_dma().
[ 9.660310] tg3 0000:01:00.0: DMA engine test failed, aborting
[ 9.754085] tg3: probe of 0000:01:00.0 failed with error -12
[ 9.997512] tg3 0000:01:00.1: DMA engine test failed, aborting
[ 10.043053] tg3: probe of 0000:01:00.1 failed with error -12
[ 10.288905] tg3 0000:02:00.0: DMA engine test failed, aborting
[ 10.334070] tg3: probe of 0000:02:00.0 failed with error -12
[ 10.578303] tg3 0000:02:00.1: DMA engine test failed, aborting
[ 10.622629] tg3: probe of 0000:02:00.1 failed with error -12
In addition, the similar situations also occur in other drivers such
as the bnxt_en driver. That can be reproduced easily in kdump kernel
when SME is active.
Let's move the handling currently in iommu_dma_deferred_attach() into
the iommu core code so that it can call the __iommu_attach_device()
directly instead of the iommu_attach_device(). The external interface
iommu_attach_device() is not suitable for handling this situation.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210126115337.20068-3-lijiang@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Let's move out the is_kdump_kernel() check from iommu_dma_deferred_attach()
to iommu_dma_init(), and use the static-key in the fast-path to minimize
the impact in the normal case.
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210126115337.20068-2-lijiang@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
An incorrect address mask is being used in the qi_flush_dev_iotlb_pasid()
to check the address alignment. This leads to a lot of spurious kernel
warnings:
[ 485.837093] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[ 485.837098] DMAR: Invalidate non-aligned address 7f76f47f9000, order 0
[ 492.494145] qi_flush_dev_iotlb_pasid: 5734 callbacks suppressed
[ 492.494147] DMAR: Invalidate non-aligned address 7f7728800000, order 11
[ 492.508965] DMAR: Invalidate non-aligned address 7f7728800000, order 11
Fix it by checking the alignment in right way.
Fixes: 288d08e780 ("iommu/vt-d: Handle non-page aligned address")
Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20210119043500.1539596-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.
However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit 6d39bdee23 ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")
Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.
Fixes: 6d39bdee23 ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds a new trace event to track the submissions of requests to the
invalidation queue. This event will provide the information like:
- IOMMU name
- Invalidation type
- Descriptor raw data
A sample output like:
| qi_submit: iotlb_inv dmar1: 0x100e2 0x0 0x0 0x0
| qi_submit: dev_tlb_inv dmar1: 0x1000000003 0x7ffffffffffff001 0x0 0x0
| qi_submit: iotlb_inv dmar2: 0x800f2 0xf9a00005 0x0 0x0
This will be helpful for queued invalidation related debugging.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210114090400.736104-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid based IOTLB and devTLB invalidation code is duplicate in
several places. Consolidate them by using the common helpers.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210114085021.717041-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Until now, we have already used the tlb operations from iommu framework,
then the tlb operations for v7s can be removed.
Correspondingly, Switch the paramenter "cookie" to the internal structure.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-8-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In current iommu_unmap, this code is:
iommu_iotlb_gather_init(&iotlb_gather);
ret = __iommu_unmap(domain, iova, size, &iotlb_gather);
iommu_iotlb_sync(domain, &iotlb_gather);
We could gather the whole iova range in __iommu_unmap, and then do tlb
synchronization in the iommu_iotlb_sync.
This patch implement this, Gather the range in mtk_iommu_unmap.
then iommu_iotlb_sync call tlb synchronization for the gathered iova range.
we don't call iommu_iotlb_gather_add_page since our tlb synchronization
could be regardless of granule size.
In this way, gather->start is impossible ULONG_MAX, remove the checking.
This patch aims to do tlb synchronization *once* in the iommu_unmap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-7-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently gather->end is "unsigned long" which may be overflow in
arch32 in the corner case: 0xfff00000 + 0x100000(iova + size).
Although it doesn't affect the size(end - start), it affects the checking
"gather->end < end"
This patch changes this "end" to the real end address
(end = start + size - 1). Correspondingly, update the length to
"end - start + 1".
Fixes: a7d20dc19d ("iommu: Introduce struct iommu_iotlb_gather for batching TLB flushes")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-5-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove IO_PGTABLE_QUIRK_TLBI_ON_MAP to avoid tlb sync for each a small
chunk memory, Use the new iotlb_sync_map to tlb_sync once for whole the
iova range of iommu_map.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-4-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
iotlb_sync_map allow IOMMU drivers tlb sync after completing the whole
mapping. This patch adds iova and size as the parameters in it. then the
IOMMU driver could flush tlb with the whole range once after iova mapping
to improve performance.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-3-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
In the end of __iommu_map, It alway call iotlb_sync_map.
This patch moves iotlb_sync_map out from __iommu_map since it is
unnecessary to call this for each sg segment especially iotlb_sync_map
is flush tlb all currently. Add a little helper _iommu_map for this.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210107122909.16317-2-yong.wu@mediatek.com
Signed-off-by: Will Deacon <will@kernel.org>
See Documentation/core-api/printk-formats.rst.
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201215213021.2090698-1-trix@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201228135112.28621-1-zhengyongjun3@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
From: Adrian Huang <ahuang12@lenovo.com>
The values of local variables are assigned after local variables
are declared, so no need to assign the initial value during the
variable declaration.
And, no need to assign NULL for the local variable 'ivrs_base'
after invoking acpi_put_table().
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201210021330.2022-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
