Resolves: ERROR: else should follow close brace '}'
Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Rename from "tgt" to "ti" so that all of dm-table.c code uses the same
naming for dm_target variables.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
All callers of dm_table_get_target() are expected to do proper bounds
checking on the index they pass.
Move dm_table_get_target() to dm-core.h to make it extra clear that only
DM core code should be using it. Switch it to be inlined while at it.
Standardize all DM core callers to use the same for loop pattern and
make associated variables as local as possible. Rename some variables
(e.g. s/table/t/ and s/tgt/ti/) along the way.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
More efficient and readable to just access table->num_targets directly.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 61b6e2e532 ("dm: fix BLK_STS_DM_REQUEUE handling when dm_io
represents split bio") reverted DM core's bio splitting back to using
bio_split()+bio_chain() because it was found that otherwise DM's
BLK_STS_DM_REQUEUE would trigger a live-lock waiting for bio
completion that would never occur.
Restore using bio_trim()+bio_inc_remaining(), like was done in commit
7dd76d1fee ("dm: improve bio splitting and associated IO
accounting"), but this time with proper handling for the above
scenario that is covered in more detail in the commit header for
61b6e2e532.
Solve this issue by adding a two staged dm_io requeue mechanism that
uses the new dm_bio_rewind() via dm_io_rewind():
1) requeue the dm_io into the requeue_list added to struct
mapped_device, and schedule it via new added requeue work. This
workqueue just clones the dm_io->orig_bio (which DM saves and
ensures its end sector isn't modified). dm_io_rewind() uses the
sectors and sectors_offset members of the dm_io that are recorded
relative to the end of orig_bio: dm_bio_rewind()+bio_trim() are
then used to make that cloned bio reflect the subset of the
original bio that is represented by the dm_io that is being
requeued.
2) the 2nd stage requeue is same with original requeue, but
io->orig_bio points to new cloned bio (which matches the requeued
dm_io as described above).
This allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Commit 7759eb23fd ("block: remove bio_rewind_iter()") removed
a similar API for the following reasons:
```
It is pointed that bio_rewind_iter() is one very bad API[1]:
1) bio size may not be restored after rewinding
2) it causes some bogus change, such as 5151842b9d (block: reset
bi_iter.bi_done after splitting bio)
3) rewinding really makes things complicated wrt. bio splitting
4) unnecessary updating of .bi_done in fast path
[1] https://marc.info/?t=153549924200005&r=1&w=2
So this patch takes Kent's suggestion to restore one bio into its original
state via saving bio iterator(struct bvec_iter) in bio_integrity_prep(),
given now bio_rewind_iter() is only used by bio integrity code.
```
However, saving off a copy of the 32 bytes bio->bi_iter in case rewind
needed isn't efficient because it bloats per-bio-data for what is an
unlikely case. That suggestion also ignores the need to restore
crypto and integrity info.
Add dm_bio_rewind() API for a specific use-case that is much more narrow
than the previous more generic rewind code that was reverted:
1) most bios have a fixed end sector since bio split is done from front
of the bio, if driver just records how many sectors between current
bio's start sector and the original bio's end sector, the original
position can be restored. Keeping the original bio's end sector
fixed is a _hard_ requirement for this interface!
2) if a bio's end sector won't change (usually bio_trim() isn't
called, or in the case of DM it preserves original bio), user can
restore the original position by storing sector offset from the
current ->bi_iter.bi_sector to bio's end sector; together with
saving bio size, only 8 bytes is needed to restore to original
bio.
3) DM's requeue use case: when BLK_STS_DM_REQUEUE happens, DM core
needs to restore to an "original bio" which represents the current
dm_io to be requeued (which may be a subset of the original bio).
By storing the sector offset from the original bio's end sector and
dm_io's size, dm_bio_rewind() can restore such original bio. See
commit 7dd76d1fee ("dm: improve bio splitting and associated IO
accounting") for more details on how DM does this. Leveraging this,
allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
4) Unlike the original rewind API, dm_bio_rewind() doesn't add .bi_done
to bvec_iter and there is no effect on the fast path.
Implement dm_bio_rewind() by factoring out clear helpers that it calls:
dm_bio_integrity_rewind, dm_bio_crypt_rewind and dm_bio_rewind_iter.
DM is able to ensure that dm_bio_rewind() is used safely but, given
the constraint that the bio's end must never change, other
hypothetical future callers may not take the same care. So make
dm_bio_rewind() and all supporting code local to DM to avoid risk of
hypothetical abuse. A "dm_" prefix was added to all functions to avoid
any namespace collisions.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If either BLK_STS_DM_REQUEUE or BLK_STS_AGAIN is returned for POLLED
io, we requeue the original bio into deferred list and kick md->wq to
re-submit it to block layer.
Improve the handling in the following way:
1) Factor out dm_handle_requeue() for handling dm_io requeue.
2) Unify handling for BLK_STS_DM_REQUEUE and BLK_STS_AGAIN: clear
REQ_POLLED for BLK_STS_DM_REQUEUE too, for the sake of simplicity,
given BLK_STS_DM_REQUEUE is very unusual.
3) Queue md->wq explicitly in dm_handle_requeue(), so requeue handling
becomes more robust.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The current split between dm_table_alloc_md_mempools and
dm_alloc_md_mempools is rather arbitrary, so merge the two
into one easy to follow function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm_get_reserved_rq_based_ios is only used in the core dm code, so
remove the export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Lift setting disk->ia_ranges from disk_register_independent_access_ranges
into disk_set_independent_access_ranges, and make the behavior the same
for the registered vs non-registered queue cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220629062013.1331068-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Independent access ranges only matter for file system I/O and are only
valid with a registered gendisk, so move them there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220629062013.1331068-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The configuration item BLK_RQ_IO_DATA_LEN is not declared in the kernel.
Select BLK_RQ_IO_DATA_LEN is meaningless which could be removed.
Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629062409.19458-1-sunying@nj.iscas.ac.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a gendisk to the sysfs register/unregister functions and give
them descriptive names. Also move the unregistration helper next
to the one doing the registration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a _hctx postfix to better describe what the functions do, match
the debugfs equivalents and release the old names for functions that
should be using them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kobject_add already grabs a reference to the parent, no need to have
another one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set up the default_groups for blk_queue_ktype instead of manually calling
sysfs_create_group.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kobject_add already adds a reference to the parent that is dropped
on deletion, so don't bother grabbing another one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the trace attributes to the default gendisk attributes, just like
we already do for partitions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220628171850.1313069-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These flags only apply to file system I/O, and all file system I/O is
already drained by del_gendisk and thus can't be in progress when
blk_cleanup_queue is called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Disallow setting the blk-mq state on any queue that is already dying as
setting the state even then is a bad idea, and remove the now unused
QUEUE_FLAG_DEAD flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to mark a surpise removal, remove the gendisk as
soon as possible when removing the device and implement the ->free_disk
callback to ensure the private data is alive as long as the gendisk has
references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This file is a huge mess that iterates over all devices and is in the
way of fixing the device removal in this driver, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, IO priority set in task's IO context is not reflected in the
bio->bi_ioprio for most IO (only io_uring and direct IO set it). This
results in odd results where process is submitting some bios with one
priority and other bios with a different (unset) priority and due to
differing priorities bios cannot be merged. Make sure bio->bi_ioprio is
always set on bio submission.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-9-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bio's IO priority needs to be initialized before we try to merge the bio
with other bios. Otherwise we could merge bios which would otherwise
receive different IO priorities leading to possible QoS issues.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-8-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert blk-ioprio handling from a rqos policy to a direct call from
blk_mq_submit_bio(). Firstly, blk-ioprio is not much of a rqos policy
anyway, it just needs a hook in bio submission path to set the bio's IO
priority. Secondly, the rqos .track hook gets actually called too late
for blk-ioprio purposes and introducing a special rqos hook just for
blk-ioprio looks even weirder.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-7-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg->ioprio_set field is not really useful except for avoiding
possibly more expensive checks inside blkcg_ioprio_track(). The check
for blkcg->prio_policy being equal to POLICY_NO_CHANGE does the same
service so just remove the ioprio_set field and replace the check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-6-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioprio_get(2) can be asked to return the best IO priority from several
tasks (IOPRIO_WHO_PGRP, IOPRIO_WHO_USER). Currently the call treats
tasks without set IO priority as having priority
IOPRIO_CLASS_BE/IOPRIO_BE_NORM however this does not really reflect the
IO priority the task will get (which depends on task's nice value).
Fix the code to use the real IO priority task's IO will use. We have to
modify code for ioprio_get(IOPRIO_WHO_PROCESS) to keep returning
IOPRIO_CLASS_NONE priority for tasks without set IO priority as a
special case to maintain userspace visible API.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220623074840.5960-5-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nobody outside of block/ioprio.c uses it.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
get_current_ioprio() operates only on current task. We will need the
same functionality for other tasks as well. Generalize
get_current_ioprio() for that and also move the bulk out of the header
file because it is large enough.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
get_current_ioprio() is used to initialize IO priority of various
requests. As such it should be returning the effective IO priority of
the task (i.e., reflecting the fact that unset IO priority should get
set based on task's CPU priority) so that the conversion is concentrated
in one place.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit e70344c059 ("block: fix default IO priority handling")
introduced an inconsistency in get_current_ioprio() that tasks without
IO context return IOPRIO_DEFAULT priority while tasks with freshly
allocated IO context will return 0 (IOPRIO_CLASS_NONE/0) IO priority.
Tasks without IO context used to be rare before 5a9d041ba2 ("block:
move io_context creation into where it's needed") but after this commit
they became common because now only BFQ IO scheduler setups task's IO
context. Similar inconsistency is there for get_task_ioprio() so this
inconsistency is now exposed to userspace and userspace will see
different IO priority for tasks operating on devices with BFQ compared
to devices without BFQ. Furthemore the changes done by commit
e70344c059 change the behavior when no IO priority is set for BFQ IO
scheduler which is also documented in ioprio_set(2) manpage:
"If no I/O scheduler has been set for a thread, then by default the I/O
priority will follow the CPU nice value (setpriority(2)). In Linux
kernels before version 2.6.24, once an I/O priority had been set using
ioprio_set(), there was no way to reset the I/O scheduling behavior to
the default. Since Linux 2.6.24, specifying ioprio as 0 can be used to
reset to the default I/O scheduling behavior."
So make sure we default to IOPRIO_CLASS_NONE as used to be the case
before commit e70344c059. Also cleanup alloc_io_context() to
explicitely set this IO priority for the allocated IO context to avoid
future surprises. Note that we tweak ioprio_best() to maintain
ioprio_get(2) behavior and make this commit easily backportable.
CC: stable@vger.kernel.org
Fixes: e70344c059 ("block: fix default IO priority handling")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_mq_delay_run_hw_queue() disables preemption to get a stable
current CPU number and then invokes __blk_mq_run_hw_queue() if the CPU
number is part the mask.
__blk_mq_run_hw_queue() acquires a spin_lock_t which is a sleeping lock
on PREEMPT_RT and can't be acquired with disabled preemption.
It is not required for correctness to invoke __blk_mq_run_hw_queue() on
a CPU matching hctx->cpumask. Both (async and direct requests) can run
on a CPU not matching hctx->cpumask.
The CPU mask without disabling preemption and invoking
__blk_mq_run_hw_queue().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/YrLSEiNvagKJaDs5@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following warnings:
block/bfq-cgroup.c:721: warning: Function parameter or member 'bfqg' not described in '__bfq_bic_change_cgroup'
block/bfq-cgroup.c:721: warning: Excess function parameter 'blkcg' description in '__bfq_bic_change_cgroup'
block/bfq-cgroup.c:870: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_leaf_entity'
block/bfq-cgroup.c:900: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_active_queues'
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220617210859.106623-1-bvanassche@acm.org
blk_queue_get_max_sectors is private to the block layer, so move it out
of blkdev.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220614090934.570632-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that blk_max_size_offset has a single caller left, fold it into that
and clean up the naming convention for the local variables there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220614090934.570632-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
get_max_io_size has a very odd choice of variables names and
initialization patterns. Switch to more descriptive names and more
clear initialization of them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614090934.570632-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_rq_get_max_sectors always uses q->limits.chunk_sectors as the
chunk_sectors argument, and already checks for max_sectors through the
call to blk_queue_get_max_sectors. That means much of
blk_max_size_offset is not needed and open coding it simplifies the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220614090934.570632-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
max_io_len always passes an explicitly non-zero chunk_sectors into
blk_max_size_offset. That means much of blk_max_size_offset is not
needed and can be open coded to simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220614090934.570632-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a helper from blk_max_size_offset so that it can be reused
independently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20220614090934.570632-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the introduction of blk_mq_get_hctx_type() the operation type in
the second argument of blk_mq_get_hctx_type() matters. The introduction
of blk_mq_get_hctx_type() caused blk_mq_get_sq_hctx() to select a
hardware queue of type HCTX_TYPE_READ instead of HCTX_TYPE_DEFAULT.
Switch to hardware queue type HCTX_TYPE_DEFAULT since HCTX_TYPE_READ
should only be used for read requests.
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220615225549.1054905-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before the introduction of blk_mq_get_hctx_type(), blk_mq_map_queue()
only used the flags from its second argument. Since the introduction of
blk_mq_get_hctx_type(), blk_mq_map_queue() uses both the operation and
the flags encoded in that argument. Rename the second argument of
blk_mq_map_queue() to make this clear.
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220615225549.1054905-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use ida_alloc()/ida_free() instead of
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20220615081816.4342-1-liubo03@inspur.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the address alignment requirements from the block_device for direct
io instead of requiring addresses be aligned to the block size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-12-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the address alignment requirements from the block_device for direct
io instead of requiring addresses be aligned to the block size. User
space can discover the alignment requirements from the dma_alignment
queue attribute.
User space can specify any hardware compatible DMA offset for each
segment, but every segment length is still required to be a multiple of
the block size.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-11-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
