mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 01:41:39 +00:00
14964 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
1a9df9e29c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
|
||
|
Christian Lamparter
|
5e07321f33 |
dt-bindings: net: dsa: qca8k: support internal mdio-bus
This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Christian Lamparter
|
fb1eb41a3d |
dt-bindings: net: dsa: qca8k: fix example
In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Thomas Gleixner
|
3ce8461f45 |
irqchip updates for 5.1, take #2
- irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0) -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlyTciIVHG1hcmMuenlu Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDHbUP/1ndbJE6O5S24YqbeffNc3dr6hka zyYpzY63KtS39TWxrLmZJlXkMecSXlY4QN3FqZd+g81p+E5zUlZ+PklqFYG6pBSj 6lHsXp4Bo20IAKJTG+4g9K3Am+i3FNoglB2ROPLF4A6pAVvyDWJL0CXCwHG8gLsS NbjDIQpcKRFOGO4qdsTNRYjEVaadShz7koLeQQJ8w/Cnraq8u7ETtAq7irmYv/c6 PX0MUfl12FtqsGZR+xC5th1PYBq5I7E/BsGNnABf9dREpUD4b0IgFV2yPg0r+mMd rSU7OZXWv+JLsQuK4FvHdlM1w7d/g5awG67Mt84eScU4LxjVV68MWtsj0WtNpIOp sCiQZ9tifBz1C2K/6iXoRLEYbrzUFOyGQX9AZXKoXqCB4eu1ZUKT7zeTtFYxIdPO jc9vGT2v7zlKsEpuj5BJEsNSRUJcGZgC7CQvJTxYWLbu7henpPkh6nf/PkbrDKIB HtuSygju1YzMH4imvZoVuhB60Bii6ZExVy6a4STYcUJu+Qj8/kyF6sHuZv4YMUnm yKGcXxAQE2C2SdYfGl2u0JradMB4kPU1+2uA7uOq/kTxcm30nGJ/YcYYEL/BaXt9 Clg7WNiTSB6NOrYLhPYOfGa1NwniFTvZWeo9C61o4gslNLukXG885U9swo+NXPYq UlJduzmQ0kDJ00ne =SBUi -----END PGP SIGNATURE----- Merge tag 'irqchip-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0) |
||
|
Fabrizio Castro
|
24105bf4d1 |
dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
Document RZ/G2E (R8A774C0) SoC bindings. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> |
||
|
Linus Torvalds
|
2b9c272cf5 |
fbdev changes for v5.1:
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+ZFI
-----END PGP SIGNATURE-----
Merge tag 'fbdev-v5.1' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"Just a couple of small fixes and cleanups:
- fix memory access if logo is bigger than the screen (Manfred
Schlaegl)
- silence fbcon logo on 'quiet' boots (Prarit Bhargava)
- use kvmalloc() for scrollback buffer in fbcon (Konstantin Khorenko)
- misc fixes (Colin Ian King, YueHaibing, Matteo Croce, Mathieu
Malaterre, Anders Roxell, Arnd Bergmann)
- misc cleanups (Rob Herring, Lubomir Rintel, Greg Kroah-Hartman,
Jani Nikula, Michal Vokáč)"
* tag 'fbdev-v5.1' of git://github.com/bzolnier/linux:
fbdev: mbx: fix a misspelled variable name
fbdev: omap2: fix warnings in dss core
video: fbdev: Fix potential NULL pointer dereference
fbcon: Silence fbcon logo on 'quiet' boots
printk: Export console_printk
ARM: dts: imx28-cfa10036: Fix the reset gpio signal polarity
video: ssd1307fb: Do not hard code active-low reset sequence
dt-bindings: display: ssd1307fb: Remove reset-active-low from examples
fbdev: fbmem: fix memory access if logo is bigger than the screen
video/fbdev: refactor video= cmdline parsing
fbdev: mbx: fix up debugfs file creation
fbdev: omap2: no need to check return value of debugfs_create functions
video: fbdev: geode: remove ifdef OLPC noise
video: offb: annotate implicit fall throughs
omapfb: fix typo
fbdev: Use of_node_name_eq for node name comparisons
fbcon: use kvmalloc() for scrollback buffer
fbdev: chipsfb: remove set but not used variable 'size'
fbdev/via: fix spelling mistake "Expandsion" -> "Expansion"
|
||
|
Linus Torvalds
|
f3ca4c55a6 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"More fixes in the queue:
1) Netfilter nat can erroneously register the device notifier twice,
fix from Florian Westphal.
2) Use after free in nf_tables, from Pablo Neira Ayuso.
3) Parallel update of steering rule fix in mlx5 river, from Eli
Britstein.
4) RX processing panic in lan743x, fix from Bryan Whitehead.
5) Use before initialization of TCP_SKB_CB, fix from Christoph Paasch.
6) Fix locking in SRIOV mode of mlx4 driver, from Jack Morgenstein.
7) Fix TX stalls in lan743x due to mishandling of interrupt ACKing
modes, from Bryan Whitehead.
8) Fix infoleak in l2tp_ip6_recvmsg(), from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
pptp: dst_release sk_dst_cache in pptp_sock_destruct
MAINTAINERS: GENET & SYSTEMPORT: Add internal Broadcom list
l2tp: fix infoleak in l2tp_ip6_recvmsg()
net/tls: Inform user space about send buffer availability
net_sched: return correct value for *notify* functions
lan743x: Fix TX Stall Issue
net/mlx4_core: Fix qp mtt size calculation
net/mlx4_core: Fix locking in SRIOV mode when switching between events and polling
net/mlx4_core: Fix reset flow when in command polling mode
mlxsw: minimal: Initialize base_mac
mlxsw: core: Prevent duplication during QSFP module initialization
net: dwmac-sun8i: fix a missing check of of_get_phy_mode
net: sh_eth: fix a missing check of of_get_phy_mode
net: 8390: fix potential NULL pointer dereferences
net: fujitsu: fix a potential NULL pointer dereference
net: qlogic: fix a potential NULL pointer dereference
isdn: hfcpci: fix potential NULL pointer dereference
Documentation: devicetree: add a new optional property for port mac address
net: rocker: fix a potential NULL pointer dereference
net: qlge: fix a potential NULL pointer dereference
...
|
||
|
Linus Torvalds
|
31ef489a02 |
dmaengine updates for v5.1-rc1
- dmatest updates for modularizing common struct and code
- remove SG support for VDMA xilinx IP and updates to driver
- Update to dw driver to support Intel iDMA controllers
multi-block support
- tegra updates for proper reporting of residue
- Add Snow Ridge ioatdma device id and support for IOATDMA v3.4
- struct_size() usage and useless LIST_HEAD cleanups in subsystem.
- qDMA controller driver for Layerscape SoCs
- stm32-dma PM Runtime support
- And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
bcm2835, qcom_hidma etc
-----BEGIN PGP SIGNATURE-----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=Ykvn
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- dmatest updates for modularizing common struct and code
- remove SG support for VDMA xilinx IP and updates to driver
- Update to dw driver to support Intel iDMA controllers multi-block
support
- tegra updates for proper reporting of residue
- Add Snow Ridge ioatdma device id and support for IOATDMA v3.4
- struct_size() usage and useless LIST_HEAD cleanups in subsystem.
- qDMA controller driver for Layerscape SoCs
- stm32-dma PM Runtime support
- And usual updates to imx-sdma, sprd, Documentation, fsl-edma,
bcm2835, qcom_hidma etc
* tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits)
dmaengine: imx-sdma: fix consistent dma test failures
dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
dmaengine: imx-sdma: add clock ratio 1:1 check
dmaengine: dmatest: move test data alloc & free into functions
dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()
dmaengine: dmatest: wrap src & dst data into a struct
dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
dmaengine: ioatdma: Add Snow Ridge ioatdma device id
dmaengine: sprd: Change channel id to slave id for DMA cell specifier
dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
dmaengine: mv_xor: Use correct device for DMA API
Documentation :dmaengine: clarify DMA desc. pointer after submission
Documentation: dmaengine: fix dmatest.rst warning
dmaengine: k3dma: Add support for dma-channel-mask
dmaengine: k3dma: Delete axi_config
dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
Documentation: bindings: dma: Add binding for dma-channel-mask
Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp
...
|
||
|
Linus Torvalds
|
2f194646fe |
remoteproc updates for v5.1
This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAlyJS1kbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FgtYP/RGxDkPOAXZmJSlurz+Z syWop/9s1nLqkSVtXDZ6pthuPtHrQEyAIOfdCbot6X0ZCuAzTnhtdJUzMFlXMBrd MDwdwxZEobr1bngz8VENrt1Lny0oy6Zm8ajyr/+xdb3Xw74mcmJ7UDjyIh1w8YPm QA6acCYCzRBIwskhlBSqVT2Mf8imAXr1bBV2nh5ngS9+5r1UkGO4/dnXs8mZQRWU ZaIfWT9kN2cIxHQH5c5bHCaYP/dmoz5FGyBVYq4OZSuFq+ziG3dQ+VA3YJFv7yUI /3P9r4VEJYpR8Tg08lG6SvEtvZ0e0zdtNX0FzYYF8KnpSjB3Vf8k5u/RNnZRn33v k5QQivC+YGpG7Rwy1pgyNtZQ881KsmN6JVQxT1rm6ddriSl4TnQXO32lswD2YmM4 Gt/+Sgu18KEa1ASbOUQk/cRS8Zr3kg2+xDrgBh+Sp0265t+6V9/cGb+PJKkJn9RD HRE3fXDdQRwEmp/rhx03kSdlhbfg5A9mTLxb/T5kBR/nC1qLYZV592mvBZS08imk 7T2zquqP+anwKDOLE++PgJbx6nlzFnPqDTjzohHWns5MfYSGEHagQ21IrDJuzkhG nr2r1Gpwkl1dDarvAgYUMCcWGCWvSrUpLfbKYR9QaKWo1JTTDbocBIFF8j7a+eVf EiKlGv7SX1LUpXk4K+WabbCr =4xC9 -----END PGP SIGNATURE----- Merge tag 'rproc-v5.1' of git://github.com/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This contains the last patches in Loic's remoteproc resource table handling changes, a number of updates to documentation, support for invoking the crash handler (for testing purposes), a fix for the handling of virtio devices during recovery, performance state votes in Qualcomm modem driver, support for specifying board specific firmware path for Qualcomm modem driver and improved support for graceful shutdown of Qualcomm remoteprocs" * tag 'rproc-v5.1' of git://github.com/andersson/remoteproc: (33 commits) remoteproc: fix for "dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag" remoteproc: fix rproc_check_carveout_da() returned error and comments remoteproc: fix trace buffer va initialization remoteproc: fix rproc_alloc_carveout() for rproc with iommu domain remoteproc: add warning on resource table cast remoteproc: fix rproc_alloc_carveout() bad variable cast remoteproc: fix rproc_da_to_va in case of unallocated carveout remoteproc: correct rproc_mem_entry_init() comments remoteproc: fix recovery procedure rpmsg: virtio: change header file sort style rpmsg: virtio: allocate buffer from parent remoteproc: st: add reserved memory support remoteproc: create vdev subdevice with specific dma memory pool remoteproc: q6v5_adsp: Remove voting for lpass_aon clock dt-binding: remoteproc: Remove lpass_aon clock from adsp pil clock list remoteproc: q6v5-mss: Active powerdomain for SDM845 remoteproc: q6v5-mss: Vote for rpmh power domains remoteproc: qcom: Add support for parsing fw dt bindings remoteproc: qcom_q6v5: don't auto boot remote processor remoteproc: qcom: Wait for shutdown-ack/ind on sysmon shutdown ... |
||
|
Linus Torvalds
|
dc2535be1f |
We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
hardware out there and the normal small fixes and updates, but then we
have some core framework changes too.
In the core framework, we introduce support for a clk_get_optional() API
to get clks that may not always be populated and a way to devm manage clkdev
lookups registered by provider drivers. We also do some refactoring to simplify
the interface between clkdev and the common clk framework so we can reuse the DT
parsing and clk_get() path in provider drivers in the future. This work will
continue in the next few cycles while we convert how providers specify clk
parents.
On the driver side, the biggest part of the dirstat is the Amlogic clk driver
that got support for the G12A SoC. It dominates with almost half the overall
diff, while the second largest part of the diff is in the i.MX clk driver
that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
and Qualcomm drivers rounding out the big part of the dirstat because they both
got new hardware support for SoCs. The rest is just various updates and non-critical
fixes for existing drivers.
Core:
- Convert a few clk bindings to JSON schema format
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
- Start rewriting clk parent registration and supporting device links
by moving around code that supports clk_get() and DT parsing of the
'clocks' property
New Drivers:
- Add Qualcomm MSM8998 RPM managed clks
- IPA clk support on Qualcomm RPMh clk controllers
- Actions Semi S500 SoC clk support
- Support for fixed rate clks populated from an MMIO register
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
- Add TMU (timer) clocks on Renesas RZ/G2E
- Add Amlogic G12A Always-On Clock Controller
- Add 32k clock generation for Amlogic AXG
- Add support for the Mali GPU clocks on Amlogic Meson8
- Add Amlogic G12A EE clock controller driver
- Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
- Add i.MX8MM SoC clk driver support
Removed Drivers:
- Remove clps711x driver as the board support is gone
Updates:
- 3rd ECO fix for Mediatek MT2712 SoCs
- Updates for Qualcomm MSM8998 GCC clks
- Random static analysis fixes for clk drivers
- Support for sleeping gpios in the clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Split LCDC into two clks on the Marvell MMP2 SoC
- Various DT of_node refcount fixes
- Get rid of CLK_IS_BASIC from TI code (yay!)
- TI Autoidle clk support
- Fix Amlogic Meson8 APB clock ID name
- Claim input clocks through DT for Amlogic AXG and GXBB
- Correct the DU (display unit) parent clock on Renesas RZ/G2E
- Exynos5433 IMEM CMU crypto clk support (SlimSS)
- Fix for the PLL-MIPI on the Allwinner A23
- Fix Rockchip rk3328 PLL rate calculation
- Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
- i.MX SCU clk driver clk_set_parent() and cpufreq support
-----BEGIN PGP SIGNATURE-----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=D4Bv
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
hardware out there and the normal small fixes and updates, but then we
have some core framework changes too.
In the core framework, we introduce support for a clk_get_optional()
API to get clks that may not always be populated and a way to devm
manage clkdev lookups registered by provider drivers. We also do some
refactoring to simplify the interface between clkdev and the common
clk framework so we can reuse the DT parsing and clk_get() path in
provider drivers in the future. This work will continue in the next
few cycles while we convert how providers specify clk parents.
On the driver side, the biggest part of the dirstat is the Amlogic clk
driver that got support for the G12A SoC. It dominates with almost
half the overall diff, while the second largest part of the diff is in
the i.MX clk driver that gained support for imx8mm SoCs. After that,
we have the Actions Semiconductor and Qualcomm drivers rounding out
the big part of the dirstat because they both got new hardware support
for SoCs. The rest is just various updates and non-critical fixes for
existing drivers.
Core:
- Convert a few clk bindings to JSON schema format
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
- Start rewriting clk parent registration and supporting device links
by moving around code that supports clk_get() and DT parsing of the
'clocks' property
New Drivers:
- Add Qualcomm MSM8998 RPM managed clks
- IPA clk support on Qualcomm RPMh clk controllers
- Actions Semi S500 SoC clk support
- Support for fixed rate clks populated from an MMIO register
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
- Add TMU (timer) clocks on Renesas RZ/G2E
- Add Amlogic G12A Always-On Clock Controller
- Add 32k clock generation for Amlogic AXG
- Add support for the Mali GPU clocks on Amlogic Meson8
- Add Amlogic G12A EE clock controller driver
- Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
- Add i.MX8MM SoC clk driver support
Removed Drivers:
- Remove clps711x driver as the board support is gone
Updates:
- 3rd ECO fix for Mediatek MT2712 SoCs
- Updates for Qualcomm MSM8998 GCC clks
- Random static analysis fixes for clk drivers
- Support for sleeping gpios in the clk-gpio type
- Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
- Split LCDC into two clks on the Marvell MMP2 SoC
- Various DT of_node refcount fixes
- Get rid of CLK_IS_BASIC from TI code (yay!)
- TI Autoidle clk support
- Fix Amlogic Meson8 APB clock ID name
- Claim input clocks through DT for Amlogic AXG and GXBB
- Correct the DU (display unit) parent clock on Renesas RZ/G2E
- Exynos5433 IMEM CMU crypto clk support (SlimSS)
- Fix for the PLL-MIPI on the Allwinner A23
- Fix Rockchip rk3328 PLL rate calculation
- Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
- i.MX SCU clk driver clk_set_parent() and cpufreq support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
clk: fixup default index for of_clk_get_by_name()
clk: Move of_clk_*() APIs into clk.c from clkdev.c
clk: Inform the core about consumer devices
clk: Introduce of_clk_get_hw_from_clkspec()
clk: core: clarify the check for runtime PM
clk: Combine __clk_get() and __clk_create_clk()
clk: imx8mq: add GPIO clocks to clock tree
clk: mediatek: correct cpu clock name for MT8173 SoC
clk: imx: Refactor entire sccg pll clk
clk: imx: scu: add cpu frequency scaling support
clk: mediatek: Mark bus and DRAM related clocks as critical
clk: mediatek: Add flags to mtk_gate
clk: mediatek: Add MUX_FLAGS macro
clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
clk: ingenic: Remove set but not used variable 'enable'
clk: at91: programmable: remove unneeded register read
clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
clk: mediatek: add MUX_GATE_FLAGS_2
...
|
||
|
Linus Torvalds
|
add8462a60 |
pwm: Changes for v5.1-rc1
The changes for this cycle are across the board. The bulk of it is cleanups, but there's also new device support in some drivers as well as more conversions to the atomic API. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlyJFvUZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zobfREACTyAxr02GyEQFm4wLLV/OG ynJ45IY2g/9OEY6RGmHQXzcBKycmFtifV6uF5PhMr0KZzdfp/uIMnyHsxV7Gm+ia NNhG7gQPrb3yZev2AGmc6N/je2+5SL6AZH3+C5ocRqThNKKFknr3uZHbZpmTQlQf QV63UYNpwtUrFu7jvzNz1kCBBUispXoDY44W0YSv8RYiKOxwJabPott0oOJH8miF lVyCa2yyA8KuW1DTP13XSHMpmUwKGNkiqaFWGIMPFz6ViK5zj/rY92dUIwLegmh7 l/A7CBMCilw9yd9o1bhSWp2yUJ1gf8QeC64awa0euk9abgX574Nxt+vJsF8EtpaF 8aCcQrJpjlpPCQV4rP62G8Dcr7tWRNmKWKRNMaXQICpdhcLXuwg6tz4HH8z+I1um W+w+9wsiqrRqKyqxlmQEXBi3qSPepJkU/DUsrE7QoO2jbmi21xyVIi1AQHXqNZYo y2NzAADuh4i7L8AVFtJ1KcvdZZIBF/XrQXgXEgjX6fQpcs6aMyNOHTu9Xod7XW59 8yBKKqYmvSmmxDcFFfajkBuUbIuUqIzFxr4U6JYHQsWNnVN1ey+MSlZK6bHA8gw0 UngjRNv8fEAU0Hck2Z0iwDe1zHVW6g/ZNKZC2TUqzETPvZHg9QKt0sJYGkmxoR5O JW1eTekpW57XahV2oX7f3g== =TyJJ -----END PGP SIGNATURE----- Merge tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this cycle are across the board. The bulk of it is cleanups, but there's also new device support in some drivers as well as more conversions to the atomic API" * tag 'pwm/for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits) pwm: atmel: Remove useless symbolic definitions pwm: bcm-kona: Update macros to remove braces around numbers pwm: imx27: Only enable the clocks once in .get_state() pwm: rcar: Improve calculation of divider pwm: rcar: Remove legacy APIs pwm: rcar: Use "atomic" API on rcar_pwm_resume() pwm: rcar: Add support "atomic" API pwm: atmel: Add support for SAM9X60's PWM controller pwm: atmel: Add PWM binding for SAM9X60 pwm: atmel: Rename objects of type atmel_pwm_data pwm: atmel: Add support for controllers with 32 bit counters pwm: atmel: Add struct atmel_pwm_data pwm: Add MediaTek MT8183 display PWM driver support pwm: hibvt: Add hi3559v100 support dt-bindings: pwm: hibvt: Add hi3559v100 support pwm: hibvt: Use individual struct per of-data pwm: imx: Signedness bug in imx_pwm_get_state() pwm: imx: Split into two drivers pwm: imx: Don't print an error on -EPROBE_DEFER pwm: imx: Set driver data earlier simplifying the end of ->probe() ... |
||
|
Linus Torvalds
|
3a186d3856 |
- mailbox-test: support multiple controller instances
- misc cleanup: IMX, STM32 and Tegra - new driver: ZynqMP IPI -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAlyHy4AACgkQf9lkf8eY P5Vv8A/9GEpuQ7otAmBFIZ4ZDrH5QsGH8IEN8LyZTK1a3tWPJWQfvaImIkSe/0Zs 66jXop2mr7laSV7Wlffm0i761LsYyur6tcA9POQE8u1LFCihOiTRT62xHhYpW8OB cpQDQs98gIlEHt/9q8hcmbeiOgi/d30t9BR/+822Dt9zt1E1ca4dGwOqTAGN7IlC NGNGJiB57H9CitGMb/Nxx881J+N0zKDqZxepnc9XXz8xIQvNLN9LeNFyXojWs+Qg /J3Gs7Y/lcxFXfCW6A4W+BxA6LCEhMEdfo/xmWCHVMiiuzqMTEdiOVDwjyntjdwL Q6/RHtb+Z6LE9cIE49NcZfldB9ulslobOmu/RJ6hdab/yx2KeNR05AtXsy0Hd1Mh dPyP53FnqxBWqfUOClDqkaHzm+Noe4No9vhVt4WMpirXnMV7N0Y7ZGRLvLbcQ2pK wyTYp/xCV4v8KoDrY3iugwFSxsZO0qZ1jPM/skpbFReCsEE/yqN4Ur08dC1oybwA 0397vm0/1kVMAIsO5IwweMCQXa+wjX4PRQKeDCVy5U3xrkItQYbz9154L3jgoXF/ PAff/cg/zpgzuEUBTgZvtQuCvClk6ji13tlwUfllG3qW0uqWj0DeDjy+nKFfG/dP vO/MAcHN3B/SUtSH9w5LBHzgyGaynxLyP5U4qTk1+E1Rs/ZlpOE= =eeym -----END PGP SIGNATURE----- Merge tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox-test: support multiple controller instances - misc cleanup: IMX, STM32 and Tegra - new driver: ZynqMP IPI * tag 'mailbox-v5.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: keep MU irq working during suspend/resume dt-bindings: mailbox: Add Xilinx IPI Mailbox mailbox: ZynqMP IPI mailbox controller mailbox: stm32-ipcc: remove useless device_init_wakeup call mailbox: stm32-ipcc: do not enable wakeup source by default mailbox: mailbox-test: fix null pointer if no mmio mailbox: mailbox-test: fix debugfs in multi-instances mailbox: tegra-hsp: mark suspend function as __maybe_unused |
||
|
Vinod Koul
|
feb59d77a4 | Merge branch 'topic/xilinx' into for-linus | ||
|
Vinod Koul
|
989e3af3af | Merge branch 'topic/k3dma' into for-linus | ||
|
Vinod Koul
|
79074168de | Merge branch 'topic/fsl' into for-linus | ||
|
Vinod Koul
|
278489c2e1 | Merge branch 'topic/dw' into for-linus | ||
|
xiaofeis
|
c6873d18cb |
Documentation: devicetree: add a new optional property for port mac address
Add documentation for a new optional property local-mac-address which is described in ethernet.txt. Signed-off-by: xiaofeis <xiaofeis@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
a089e4fed5 |
linux-watchdog 5.1-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAlyFIfgACgkQ+iyteGJfRsqt4gCgrgwSrDhwW+u7NjyY48KGAPgt xM8AoM31H9C2HrT2IJuKa3FjIawceUfw =wj0o -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - a new watchdog driver for the Mellanox systems - renesas-wdt: Document r8a77470 support - numerous 'Mark expected switch fall-throughs' - qcom: Add suspend/resume support - some small fixes and documentation updates * tag 'linux-watchdog-5.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: w83877f_wdt: Mark expected switch fall-through watchdog: sc520_wdt: Mark expected switch fall-through watchdog: sbc60xxwdt: Mark expected switch fall-through watchdog: smsc37b787_wdt: Mark expected switch fall-through watchdog: sc1200: Mark expected switch fall-through watchdog: pc87413: Mark expected switch fall-through Documentation/watchdog: Add documentation mlx-wdt driver watchdog: mlx-wdt: introduce a watchdog driver for Mellanox systems. platform_data/mlxreg: additions for Mellanox watchdog driver. watchdog: Update sysfs documentation. watchdog: dw: remove useless pr_fmt watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init watchdog/hpwdt: Update Kconfig documentation dt-bindings: watchdog: renesas-wdt: Document r8a77470 support watchdog: qcom: Add suspend/resume support |
||
|
Linus Torvalds
|
cf0240a755 |
This is the bulk of pin control changes for the v5.1 kernel cycle.
No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJchil8AAoJEEEQszewGV1zTCcP/AurT3InBO4nVdN9UMuoDL7P gx3SALULapc4+M1NUoRw+w+z5fvjd0gGdPXZeyhX1E9kXxLmWBmBf6tl0MO2YYPC UWbSnBaWIOOli0f4k+GKVF8LKqD0z0e/YqX4mG7UI3OLJzcJgm7OL9uXN3Gh7tIP Pa6CGbv0aRDkZpWUD2ZTpSPCRYGT57roVq//d7V7s+0lveS97pQuMv43YlS5L2my JOOhHNG33bgi4lS/ZOP81G16oOrVaoupXuX7E+AvgG6vxr5965Fi+qoGLkxIuYOm jtrzuNY98eL2m9b505VYdNmD7ouBhG6CKFb4njpOvjkkqNUXOaGV53wlEuEYRUNz bsp0596+dlOcW7wl11r6YI4Kyn2wQJFql1AwS8A4dEtbuboGrDy16N3adr1SkIGZ 4ESN8xydcC7CAgUGXks+AgDj9vYwOs4apylJDW5tMk4K0LIsEYsDkbNeS9hwDYIH ZlbQe9N2loB6qQbX3c3D3/sIhKj2VB4elONSwOW10M8OJdJwp8h44UyMZ3TIEHIT 7Gu9pw5vobXbccKCSjqkYYflaHMmjwZUtLqDZws818sbe/xgDxONbRqloZCLV39Y kmwRGbbE5WtNAM0X+ABwMG3Lm77wxCFKCjJwLHH79qqt4kSBynEKXQ4D/coG/Hln 6idanzKEPiIBJ+6QLdbQ =EfXK -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ... |
||
|
Linus Torvalds
|
4f0237062c |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - update the ili210x touchscreen driver, refreshing the code and adding support for ILI251X line - add support for st1633 to the st1232 touchscreen driver - add support for sx8650 to the the sx8654 touchscreen driver - add support for Evervision FT5726 to the edt-ft5x06 touchscreen driver - add support for gt5688 to the Goodix touchscreen driver - new vibrator driver for MSM SOCs - miscellaneous fixes for the rest of input drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits) Input: wacom_serial4 - add support for Wacom ArtPad II tablet Input: elan_i2c - add id for touchpad found in Lenovo s21e-20 Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV Input: msm-vibrator - use correct gpio header Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev' Input: i8042 - rework DT node name comparisons Input: goodix - print values in case of inconsistencies Input: goodix - refer to touchscreen.txt in device tree bindings Input: goodix - support Goodix gt5688 Input: synaptics_i2c - remove redundant spinlock Input: db9 - mark expected switch fall-through Input: qt2160 - remove redundant spinlock Input: st1232 - handle common DT bindings Input: ims-pcu - switch to using brightness_set_blocking() Input: st1232 - switch to gpiod API Input: ili210x - fetch touchscreen geometry from DT Input: msm-vibrator - tweak an error message Input: tm2-touchkey - acknowledge that setting brightness is a blocking call Input: stmfts - acknowledge that setting brightness is a blocking call Input: ili210x - switch to using devm_device_add_group() ... |
||
|
Linus Torvalds
|
8f49a658b4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
|
||
|
Linus Torvalds
|
ffd602eb46 |
Kbuild updates for v5.1
- do not generate unneeded top-level built-in.a - let git ignore O= directory entirely - optimize scripts/kallsyms slightly - exclude DWARF info from *.s regardless of config options - fix GCC toolchain search path for Clang to prepare ld.lld support - do not generate modules.order when CONFIG_MODULES is disabled - simplify single target rules and remove VPATH for external module build - allow to add optional flags to dpkg-buildpackage when building deb-pkg - move some compiler option tests from Makefile to Kconfig - various Makefile cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcgxYUAAoJED2LAQed4NsGr7YQAJq4LmN/aZDI9Mt0YAQjEyyA PCpm8J2HI9HO1sMoY7J/ksWmV0BU25G+uspKD7dXAQo3l9fmahQM5e4dsyZ4Xqs8 DyyYSGtJJnMJaWmupIZNA4UKDCVtwPoVW8YeuK9rwADVokCux9avogof9O1OoA/E Pylo+I4UCM82kbpZSd+UxnCx6B0v8XGtW+d31Q4yZXCkw5nw14chrlaprcqB3UgB +7C3xOnDWCi7gyxaTqmD7dLay2DM8KCDlznEvBL733Y/cK3to1fywzEPzp0JQCLX BLgmmpW13NF++q5BCoTW6sFjZAhBVbiYZwesMrCi75Y32T8zt4G5l4pkvGkSuGF/ UQh5aoCxaMIp70VPj/loZ0lh78nwVGTok9zRb0rfztM0X4DbmiPi5MNiHRzRpIeE 1jjEa/GK1t0TDnXc/MuDFK8cWwdhttIqUL5yWfAxjXbtP27eLtsopQUdW7EPHs7d sMnfuSUuhOC28yByVxIkBcwawLyYrcWRphJ3ixCO70CoJWt2DT6aOKxcFJefoJix Pto6Oo3oQ4iypMM5M9/0Uo+AK2TKRejWIqtZdbo+ir70tNxVH3WDZq++fG0drXOB r2I/GY6nRjuzLOe2jzEqywFTFd2xpk4Qo84LGb1R3U6aU5qS2gA0W/q00JS5c2qU R8uReJ7bvmLmrVNZ/NI4 =y9YG -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - do not generate unneeded top-level built-in.a - let git ignore O= directory entirely - optimize scripts/kallsyms slightly - exclude DWARF info from *.s regardless of config options - fix GCC toolchain search path for Clang to prepare ld.lld support - do not generate modules.order when CONFIG_MODULES is disabled - simplify single target rules and remove VPATH for external module build - allow to add optional flags to dpkg-buildpackage when building deb-pkg - move some compiler option tests from Makefile to Kconfig - various Makefile cleanups * tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: remove scripts/basic/% build target kbuild: use -Werror=implicit-... instead of -Werror-implicit-... kbuild: clean up scripts/gcc-version.sh kbuild: remove cc-version macro kbuild: update comment block of scripts/clang-version.sh kbuild: remove commented-out INITRD_COMPRESS kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig kbuild: [bin]deb-pkg: add DPKG_FLAGS variable kbuild: move ".config not found!" message from Kconfig to Makefile kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing kbuild: simplify single target rules kbuild: remove empty rules for makefiles kbuild: make -r/-R effective in top Makefile for old Make versions kbuild: move tools_silent to a more relevant place kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig kbuild: refactor cc-cross-prefix implementation kbuild: hardcode genksyms path and remove GENKSYMS variable scripts/gdb: refactor rules for symlink creation kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target scripts/gdb: do not descend into scripts/gdb from scripts ... |
||
|
Linus Torvalds
|
bb97be23db |
IOMMU Updates for Linux v5.1
Including: - A big cleanup and optimization patch-set for the Tegra GART driver - Documentation updates and fixes for the IOMMU-API - Support for page request in Intel VT-d scalable mode - Intel VT-d dma_[un]map_resource() support - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel VT-d to align with the latest version of the ATS spec - Relaxed IRQ source checking in the Intel VT-d driver for some aliased devices, needed for future devices which send IRQ messages from more than on request-ID - IRQ remapping driver for Hyper-V - Patches to make generic IOVA and IO-Page-Table code usable outside of the IOMMU code - Various other small fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAlyCNlIACgkQK/BELZcB GuNDiRAAscgYj0BdqpZVUNHl4PySR12QJpS1myl/OC4HEbdB/EOh+bYT4Q1vptCU GNK6Gt9SVfcbtWrLiGfcP9ODXmbqZ6AIOIbHKv9cvw1mnyYAtVvT/kck7B/W5jEr /aP/5RTO7XcqscWO44zBkrtLFupegtpQFB0jXYTJYTrwQoNKRqCUqfetZGzMkXjL x/h7kFTTIRcVP8RFcOeAMwC6EieaI8z8HN976Gu7xSV8g0VJqoNsBN8jbUuBh5AN oPyd9nl1KBcIQEC1HsbN8I5wIhTh1sJ2UDqFHAgtlnO59zWHORuFUUt6SXbC9UqJ okJTzFp9Dh2BqmFPXxBTxAf3j+eJP2XPpDI9Ask6SytEPhgw39fdlOOn2MWfSFoW TaBJ4ww/r98GzVxCP7Up98xFZuHGDICL3/M7Mk3mRac/lgbNRbtfcBa5NV4fyQhY 184t656Zm/9gdWgGAvYQtApr6/iI+wRMLkIwuw63wqH09yfbDcpTOo6DEQE3B5KR 4H1qSIiVGVVZlWQateR6N32ZmY4dWzpnL2b8CfsdBytzHHFb/c3dPnZB8fxx9mwF onyvjg9nkIiv7mdcN4Ox2WXrAExTeSftyPajN0WWawNJU3uPTBgNrqNHyWSkiaN4 dAvEepfGuFQGz2Fj03Pv7OqY8veyRezErVRLwiMJRNyy7pi6Wng= =cKsD -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - A big cleanup and optimization patch-set for the Tegra GART driver - Documentation updates and fixes for the IOMMU-API - Support for page request in Intel VT-d scalable mode - Intel VT-d dma_[un]map_resource() support - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel VT-d to align with the latest version of the ATS spec - Relaxed IRQ source checking in the Intel VT-d driver for some aliased devices, needed for future devices which send IRQ messages from more than on request-ID - IRQ remapping driver for Hyper-V - Patches to make generic IOVA and IO-Page-Table code usable outside of the IOMMU code - Various other small fixes and cleanups * tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Get domain ID before clear pasid entry iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm() iommu/vt-d: Set context field after value initialized iommu/vt-d: Disable ATS support on untrusted devices iommu/mediatek: Fix semicolon code style issue MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope iommu/hyper-v: Add Hyper-V stub IOMMU driver x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available PCI/ATS: Add inline to pci_prg_resp_pasid_required() iommu/vt-d: Check identity map for hot-added devices iommu: Fix IOMMU debugfs fallout iommu: Document iommu_ops.is_attach_deferred() iommu: Document iommu_ops.iotlb_sync_map() iommu/vt-d: Enable ATS only if the device uses page aligned address. PCI/ATS: Add pci_ats_page_aligned() interface iommu/vt-d: Fix PRI/PASID dependency issue. PCI/ATS: Add pci_prg_resp_pasid_required() interface. iommu/vt-d: Allow interrupts from the entire bus for aliased devices iommu/vt-d: Add helper to set an IRTE to verify only the bus number iommu: Fix flush_tlb_all typo ... |
||
|
Linus Torvalds
|
065b6c4c91 |
Devicetree updates for v5.1:
- Fix a unittest failure on UML. Preparation for converting to kunit test framework. - Add annotations to dtx_diff output - Fix unittest reporting of expected error - Move DMA configuration for virtual devices into the driver that needs it (s5p-mfc) - Vendor prefixes for feiyang and techstar - Convert ARM GIC, GICv3, and L2x0 to DT schema - Add r8a7778/9 HSCIF serial bindings -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlyC0hoQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhwzMdD/93737AUFqQNfMXlsrZs/OS9dGTQdYtuFOw Z2643O1l5QTPAleBqQWVGpxph67pQf3uZ+7zAsknJkweysMaDG1Ej22sFnyIM+Hh +IeLBYOtB7hd6FSCX40apT6Jlw2KG7Lqk0JvXVv7yXJRptsf7R6oUw8GoxxUBbsp 4fL1IwuAyq3TrMtGETl7MW4QJma9A8zo9ngQSiRQr9yflROmE1dXjge+KPHOsTRr 9PU6NSgsuUG0eBw9stL4bDZwXXGb3sEcXaItY5A37JTI6bLgPuk8cA4lp+gTL5RK 77uGs8rbe8WqFPWeMmDwRdbSDasb52NDfGBG5Dj7n7tHVP7rubyA1XK3fVK5udjZ hHhQa0G5gLBnd9/7Je8udkvwH9ef/BjnHp1KFOBrCMLCgYX+QZQZUNwuTI5/l6E3 A/dOo6JG+rshtI3P3Up69XOu1KMhacNVu/TTHVGkUeq5vf+iKr1BYu2VsVIHdQh7 hdJ6syheq3qHBAOOuB5Z+yyFzwh1w98gpqlG8lUSYjnochej4YSgNTMef9vhdWZg vTdP/XNnYvH9XTqxSAhfIxUWeaggrngYQCQhci8F57DskKkPKeyFhxo7ODGD4bI6 hXcUgk2OtEF2Sgk+X9XCtI5vJXuXvGxmlpZpdUe7LiVE3CnOwfFxvLfIhpw+2AIp /7S2Khwnsg== =CnTd -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - Fix a unittest failure on UML. Preparation for converting to kunit test framework. - Add annotations to dtx_diff output - Fix unittest reporting of expected error - Move DMA configuration for virtual devices into the driver that needs it (s5p-mfc) - Vendor prefixes for feiyang and techstar - Convert ARM GIC, GICv3, and L2x0 to DT schema - Add r8a7778/9 HSCIF serial bindings * tag 'devicetree-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: unittest: unflatten device tree on UML when testing dt-bindings: Add vendor prefix for feiyang dt-bindings: Add vendor prefix for techstar dt-bindings: display: add missing semicolon in example of: mark early_init_dt_alloc_reserved_memory_arch static of: add dtc annotations functionality to dtx_diff of: unittest: add caution to function header comment of: unittest: remove report of expected error dt-bindings: interrupt-controller: Convert ARM GICv3 to json-schema dt-bindings: interrupt-controller: Convert ARM GIC to json-schema dt-bindings: arm: l2x0: Convert L2 cache to json-schema media: s5p-mfc: Fix memdev DMA configuration dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings |
||
|
Linus Torvalds
|
3d8dfe75ef |
arm64 updates for 5.1:
- Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlyCl0cACgkQa9axLQDI XvEyKxAAiogBZLbyhcy8bTUHVzVoJE0FyAkdO2wWnnaff2Ohkhy1Y/npv33IeK2q RknxqDIx2DUUVPJNRZGoI/WwBtTZdKaAnW4rIKG84yC1eAkFcd96WQasaZzcp1qY HmvbJiYXM0bh+0J7i3Wgry/QzOkrltJFJW2kp6Wd5aFE+R1WyWyxT6d+Fp0J3vlA bT70jlpBK6LXEOmmBS+04Ml02+8MvaGxIl8EInBHSfDLRLErj5E8n41rRHKUiSWz maWI+kVoLYwOE68xiZlDftUBEeQpUSWgg2nxeK+640QSl1wJmVcRcY9nm6TZeMG2 AiZTR9a7cP5rrdSN5suUmb7d4AMMVlVMisGDlwb+9oCxeTRDzg0uwACaVgHfPqQr UeBdHbL9nStN7uBH23H8L9mKk+tqpFmk0sgzdrKejOwysAiqWV8aazb/Na3qnVRl J1B5opxMnGOsjXmHvtG/tiZl281Uwz5ZmzfLmIY3gUZgUgdA3511Egp0ry5y1dzJ SkYC4Hmzb2ybQvXGIDDa3OzCwXXiqyqKsO+O8Egg1k4OIwbp3w+NHE7gKeA+dMgD gjN7zEalCUi46Q28xiCPEb+88BpQ18czIWGQLb9mAnmYeZPjqqenXKXuRHr4lgVe jPURJ/vqvFEglZJN1RDuQHKzHEcm5f2XE566sMZYdSoeiUCb0QM= =2U56 -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ... |
||
|
Linus Torvalds
|
92fff53b71 |
SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z f69LpXGmMpuagKGvvd4= =Fhy1 -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ... |
||
|
Linus Torvalds
|
2901752c14 |
pci-v5.1-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5 gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4 idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr 6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor cbMcPAN2jOCyFVs= =vf9L -----END PGP SIGNATURE----- Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ... |
||
|
Linus Torvalds
|
96a6de1a54 |
media updates for v5.1-rc1
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJcgUDlAAoJEAhfPr2O5OEV2kIP/AiHMkMGi/fXmwzN0tFjYkim 39t6rodj6rT/oMib4XvW55GjQy5sdXwz+1jE+kZA5imbUvt6YzUXFBzIBOGOIF0n 1MukKa7M6ragnm2yR+42ucBr3jcuc91/keeVzWgP2cgeZeKUlBHme+rECYnwqDdT 9rcG4U2XL0Wolbm4lAispaWYIYoOURvPeryJ244vlPmch5/2nmXbG7AgNlfJsAw4 NFmdHBWxLeyB8F95ToikhuNlTWrsvdVHPHbDaDPwioSulZ1vw+lu4CHRd1uZo2iH W0INE65ukgyenzTDbmnj5/oWCqV4KRTs8A2x6eimz+wG/60jWQjDiBLSzhxjBH7x alrwhxnW3bD31ZUCkmaGd1+3txvLf+Lup9lLX3GCBKA45dW9pzVCLfxSfNaKKlTL 0xCYSMxl5xbl8TL6hHxK7/n+LsButgTRWIoJpqkM9uPrljwzznpgqJvARqSuHEKJ 3Tvnkc2DZsmlM8L02i929BsrsoTncm6wBBVlCJzhL0VNaOuL7yJVzXhrw7b/dZZw IZu6cH5RrZhIQR4y1UPlaEZoidUGvR0+K997AsURIHJA0RolWE5eI2JHSE86EX8S bzG5SChkQmbpYt5OXQvg5VxvqVElx/5/tamcHe/rKwaAwaG9aI9HICgP2e0Zaoce YOMJUpcHtSY5Fedk8P1a =tD1x -----END PGP SIGNATURE----- Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove sensor drivers that got converted from soc_camera - remaining soc_camera drivers got moved to staging - some documentation cleanups and improvements - the imx staging driver now supports imx7 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera - the vim2m driver now does what a m2m convert driver expects to do - epoll() fixes on media subsystems - several drivers fixes, typos, cleanups and improvements * tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits) media: dvb/earth-pt1: fix wrong initialization for demod blocks media: vim2m: Address some coding style issues media: vim2m: don't use BUG() media: vim2m: speedup passthrough copy media: vim2m: add an horizontal scaler media: vim2m: don't accept YUYV anymore as output format media: vim2m: add vertical linear scaler media: vim2m: better handle cap/out buffers with different sizes media: vim2m: use different framesizes for bayer formats media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES media: vim2m: ensure that width is multiple of two media: vim2m: improve debug messages media: vim2m: add bayer capture formats media: a few more typos at staging, pci, platform, radio and usb media: Documentation: fix several typos media: staging: fix several typos media: include: fix several typos media: common: fix several typos media: v4l2-core: fix several typos media: usb: fix several typos ... |
||
|
Christophe Roullier
|
8356679990 |
dt-bindings: net: stmmac: remove syscfg clock property
Syscfg clock is no more needed. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Christophe Roullier
|
830133daec |
dt-bindings: net: stmmac: add phys config properties
Add properties to support all Phy config PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Stephen Boyd
|
fea0b0850a |
Merge branches 'clk-typo', 'clk-json-schema', 'clk-mtk-2712-eco' and 'clk-rockchip' into clk-next
- Convert a few clk bindings to JSON schema format - 3rd ECO fix for Mediatek MT2712 SoCs * clk-typo: clk: samsung: fix typo * clk-json-schema: dt-bindings: clock: Convert fixed-factor-clock to json-schema dt-bindings: clock: Convert fixed-clock binding to json-schema * clk-mtk-2712-eco: clk: mediatek: update clock driver of MT2712 dt-bindings: clock: add clock for MT2712 * clk-rockchip: clk: rockchip: add CLK_SET_RATE_PARENT for rk3066 lcdc dclks clk: rockchip: fix frac settings of GPLL clock for rk3328 |
||
|
Stephen Boyd
|
75f486c015 |
Merge branches 'clk-qcom-msm8998', 'clk-fractional-parent', 'clk-x86-mv' and 'clk-SA-fixes' into clk-next
- Updates for qcom MSM8998 GCC clks - qcom MSM8998 RPM managed clks - Random static analysis fixes for clk drivers * clk-qcom-msm8998: clk: qcom: Make common clk_hw registrations clk: qcom: smd: Add support for MSM8998 rpm clocks clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998 clk: qcom: Add missing freq for usb30_master_clk on 8998 clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks * clk-fractional-parent: clk: fractional-divider: check parent rate only if flag is set * clk-x86-mv: clk: x86: Move clk-lpss.h to platform_data/x86 * clk-SA-fixes: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: tegra: dfll: Fix debugfs_simple_attr.cocci warnings clk: qoriq: Improve an error message |
||
|
Stephen Boyd
|
461ea6ab2c |
Merge branches 'clk-qcom-rpmh', 'clk-gpio-sleep', 'clk-stm32mp1', 'clk-qcom-qcs404' and 'clk-actions-s500' into clk-next
- IPA clk support on Qualcomm RPMh clk controllers - Support sleeping gpios in clk-gpio type - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.) - Actions Semi S500 SoC clk support * clk-qcom-rpmh: clk: qcom: clk-rpmh: Add IPA clock support * clk-gpio-sleep: clk: clk-gpio: add support for sleeping GPIOs in gpio-gate-clk * clk-stm32mp1: dt-bindings: clock: remove unused definition for stm32mp1 clk: stm32mp1: fix bit width of hse_rtc divider clk: stm32mp1: remove unnecessary CLK_DIVIDER_ALLOW_ZERO flag clk: stm32mp1: fix HSI divider flag clk: stm32mp1: fix mcu divider table clk: stm32mp1: set ck_csi as critical clock clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks clk: stm32mp1: parent clocks update * clk-qcom-qcs404: clk: qcom: gcc-qcs404: Add cfg_offset for blsp1_uart3 clock clk: qcom: clk-rcg2: Introduce a cfg offset for RCGs clk: qcom: remove empty lines in clk-rcg.h * clk-actions-s500: clk: actions: Add clock driver for S500 SoC dt-bindings: clock: Add DT bindings for Actions Semi S500 CMU clk: actions: Add configurable PLL delay |
||
|
Stephen Boyd
|
e7faa095cb |
Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next
- Split LCDC into two clks on the Marvell MMP2 SoC
* clk-imx:
clk: imx8mq: add GPIO clocks to clock tree
clk: imx: Refactor entire sccg pll clk
clk: imx: scu: add cpu frequency scaling support
clk: imx: imx8mm: Mark init function __init
clk: imx8mq: Add the missing ARM clock
dt-bindings: imx8mq-clock: Add the missing ARM clock
clk: imx: imx8mq: Fix the rate propagation for arm pll
clk: imx8mq: Add support for the CLKO1 clock
clk: imx8mq: Fix the CLKO2 source select list
clk: imx8mq: Add missing M4 clocks
clk: imx: Add clock driver support for imx8mm
dt-bindings: imx: Add clock binding doc for imx8mm
clk: imx: Add PLLs driver for imx8mm soc
clk: imx5: add imx5_SCC2_IPG_GATE
clk: imx: scu: add set parent support
clk: imx: scu: add fallback compatible string support
clk: imx8mq: Make parent names arrays const pointers
clk: imx: Make parents const pointer in mux wrappers
clk: imx: Make parent_names const pointer in composite-8m
* clk-samsung:
clk: samsung: s3c2443: Mark expected switch fall-through
clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
clk: samsung: exynos5433: Add selected IMEM clocks
clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
clk: samsung: exynos5433: Fix name typo in sssx
clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs
* clk-ti:
clk: clk-twl6040: Fix imprecise external abort for pdmclk
ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
clk: ti: check clock type before doing autoidle ops
clk: ti: add a usecount for autoidle
clk: ti: generalize the init sequence of clk_hw_omap clocks
clk: ti: remove usage of CLK_IS_BASIC
clk: ti: add new API for checking if a provided clock is an OMAP clock
clk: ti: move clk_hw_omap list handling under generic part of the driver
* clk-uniphier-gear:
clk: uniphier: Fix update register for CPU-gear
* clk-mmp2-lcdc:
clk: mmp2: separate LCDC peripheral clk form the display clock
dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
|
||
|
Stephen Boyd
|
3f8e7e7247 |
Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', 'clk-meson' and 'clk-renesas' into clk-next
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
* clk-optional:
clk: Add (devm_)clk_get_optional() functions
clk: Add comment about __of_clk_get_by_name() error values
* clk-devm-clkdev-register:
clk: clk-st: avoid clkdev lookup leak at remove
clk: clk-max77686: Clean clkdev lookup leak and use devm
clkdev: add managed clkdev lookup registration
* clk-allwinner:
clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it
* clk-meson: (22 commits)
clk: meson: meson8b: fix the naming of the APB clocks
dt-bindings: clock: meson8b: add APB clock definition
clk: meson: Add G12A AO Clock + Reset Controller
dt-bindings: clk: add G12A AO Clock and Reset Bindings
clk: meson: factorise meson64 peripheral clock controller drivers
clk: meson: g12a: add peripheral clock controller
dt-bindings: clk: meson: add g12a periph clock controller bindings
clk: meson: pll: update driver for the g12a
clk: meson: rework and clean drivers dependencies
clk: meson: axg-audio does not require syscon
clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
clk: export some clk_hw function symbols for module drivers
clk: meson: ao-clkc: claim clock controller input clocks from DT
clk: meson: axg: claim clock controller input clock from DT
clk: meson: gxbb: claim clock controller input clock from DT
clk: meson: meson8b: add the GPU clock tree
clk: meson: meson8b: use a separate clock table for Meson8
clk: meson: axg-ao: add 32k generation subtree
clk: meson: gxbb-ao: replace cec-32k with the dual divider
clk: meson: add dual divider clock driver
...
* clk-renesas:
clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK
clk: renesas: r8a774c0: Add TMU clock
clk: renesas: r8a77980: Add RPC clocks
clk: renesas: rcar-gen3: Add RPC clocks
clk: renesas: rcar-gen3: Add spinlock
clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
clk: renesas: r8a774c0: Correct parent clock of DU
clk: renesas: r8a774a1: Add missing CANFD clock
clk: renesas: r8a774c0: Add missing CANFD clock
|
||
|
Stephen Boyd
|
7e2570031a |
Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', 'clk-socfpga-parent' and 'clk-struct-size' into clk-next
- Various DT of_node refcount fixes - Support for fixed rate clks populated from an MMIO register - Remove clps711x driver as the board support is gone * clk-of-refcount: clk: dove: fix refcount leak in dove_clk_init() clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init() clk: armada-xp: fix refcount leak in axp_clk_init() clk: kirkwood: fix refcount leak in kirkwood_clk_init() clk: armada-370: fix refcount leak in a370_clk_init() clk: vf610: fix refcount leak in vf610_clocks_init() clk: imx7d: fix refcount leak in imx7d_clocks_init() clk: imx6sx: fix refcount leak in imx6sx_clocks_init() clk: imx6q: fix refcount leak in imx6q_clocks_init() clk: samsung: exynos4: fix refcount leak in exynos4_get_xom() clk: socfpga: fix refcount leak clk: ti: fix refcount leak in ti_dt_clocks_register() clk: qoriq: fix refcount leak in clockgen_init() clk: highbank: fix refcount leak in hb_clk_init() * clk-mmio-fixed-clock: clk: Add Fixed MMIO clock driver dt-bindings: clk: Add bindings for Fixed MMIO clock * clk-remove-clps: clk: clps711x: Remove board support * clk-socfpga-parent: clk: socfpga: Don't have get_parent for single parent ops * clk-struct-size: clk: imx: imx7ulp: use struct_size() in kzalloc() |
||
|
Linus Torvalds
|
3601fe43e8 |
This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in
the qualcomm pin controllers, closely coupled with the
gpiochip. This rework, in a classic fall-between-the-chairs
fashion has been sidestepped for too long. The Qualcomm
IRQchips using the SPMI and SSBI transport mechanisms have
been rewritten to use hierarchical irqchip. This creates
the base from which I intend to gradually pull support for
hierarchical irqchips into the gpiolib irqchip helpers to
cut down on duplicate code. We have too many hacks in the
kernel because people have been working around the missing
hierarchical irqchip for years, and once it was there,
noone understood it for a while. We are now slowly adapting
to using it. This is why this pull requests include changes
to MFD, SPMI, IRQchip core and some ARM Device Trees
pertaining to the Qualcomm chip family. Since Qualcomm have
so many chips and such large deployments it is paramount
that this platform gets this right, and now it (hopefully)
does.
- Core support for pull-up and pull-down configuration, also
from the device tree. When a simple GPIO chip support a
"off or on" pull-up or pull-down resistor, we provide a
way to set this up using machine descriptors or device tree.
If more elaborate control of pull up/down (such as
resistance shunt setting) is required, drivers should be
phased over to use pin control. We do not yet provide a
userspace ABI for this pull up-down setting but I suspect
the makers are going to ask for it soon enough. PCA953x
is the first user of this new API.
- The GPIO mockup driver has been revamped after some
discussion improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for
both testing and virtual prototyping, e.g. when you do
not yet have a GPIO expander to play with but really
want to get something to develop code around before
hardware is available. It's neat. The blackbox testing
usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating
flags.
- A new device core helper for devm_platform_ioremap_resource()
is funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped
I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum
driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers.
-----BEGIN PGP SIGNATURE-----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=VoVC
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
|
||
|
Linus Torvalds
|
cf2e8c544c |
- New Drivers
- Add STMPE ADC Input driver
- Add STMicroelectronics STPMIC1 Parent driver
- Add STMicroelectronics STPMIC1 OnKey Misc driver
- Add STMicroelectronics STPMIC1 Watchdog driver
- Add Cirrus Logic Lochnagar Parent driver
- Add TQ-Systems TQMX86 Parent driver
- New Device Support
- Add support for ADC to STMPE
- New (or moved) Functionality
- Move Lightbar functionality to its own driver; cros_ec_lightbar
- Move VBC functionality to its own driver; cros_ec_vbc
- Move VBC functionality to its own driver; cros_ec_vbc
- Move DebugFS functionality to its own driver; cros_ec_debugfs
- Move SYSFS functionality to its own driver; cros_ec_sysfs
- Add support for input voltage options; tps65218
- Fix-ups
- Use devm_* managed resources; cros_ec
- Device Tree documentation; stmpe, aspeed-lpc, lochnagar
- Trivial Clean-ups; stmpe
- Rip out broken modular code; aat2870-core, adp5520, as3711,
db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
- Kconfig fixups; INTEL_SOC_PMIC
- Improve error path; sm501, sec-core
- Use struct_size() helper; sm501
- Constify; at91-usart
- Use pointers instead of copying data; at91-usart
- Deliver proper return value; cros_ec_dev
- Trivial formatting/whitespace; sec-core
-----BEGIN PGP SIGNATURE-----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=tUge
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add STMPE ADC Input driver
- Add STMicroelectronics STPMIC1 Parent driver
- Add STMicroelectronics STPMIC1 OnKey Misc driver
- Add STMicroelectronics STPMIC1 Watchdog driver
- Add Cirrus Logic Lochnagar Parent driver
- Add TQ-Systems TQMX86 Parent driver
New Device Support:
- Add support for ADC to STMPE
New (or moved) Functionality:
- Move Lightbar functionality to its own driver; cros_ec_lightbar
- Move VBC functionality to its own driver; cros_ec_vbc
- Move VBC functionality to its own driver; cros_ec_vbc
- Move DebugFS functionality to its own driver; cros_ec_debugfs
- Move SYSFS functionality to its own driver; cros_ec_sysfs
- Add support for input voltage options; tps65218
Fixes:
- Use devm_* managed resources; cros_ec
- Device Tree documentation; stmpe, aspeed-lpc, lochnagar
- Trivial Clean-ups; stmpe
- Rip out broken modular code; aat2870-core, adp5520, as3711,
db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
- Kconfig fixups; INTEL_SOC_PMIC
- Improve error path; sm501, sec-core
- Use struct_size() helper; sm501
- Constify; at91-usart
- Use pointers instead of copying data; at91-usart
- Deliver proper return value; cros_ec_dev
- Trivial formatting/whitespace; sec-core"
* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
mfd: mxs-lradc: Mark expected switch fall-through
mfd: sec-core: Cleanup formatting to a consistent style
mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
mfd: intel-lpss: Move linux/pm.h to the local header
mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
mfd: at91-usart: No need to copy mfd_cell in probe
mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
mfd: lochnagar: Add initial binding documentation
dt-bindings: mfd: aspeed-lpc: Make parameter optional
mfd: sec-core: Return gracefully instead of BUG() if device cannot match
mfd: sm501: Use struct_size() in devm_kzalloc()
mfd: sm501: Fix potential NULL pointer dereference
mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
mfd: tps65218.c: Add input voltage options
mfd: wm8400-core: Make it explicitly non-modular
mfd: wm8350-core: Drop unused module infrastructure from non-modular code
mfd: wm8350-i2c: Make it explicitly non-modular
mfd: wm831x-core: Drop unused module infrastructure from non-modular code
...
|
||
|
Linus Torvalds
|
f8d35403eb |
RTC for 5.0
Subsystem: - new quartz-load-femtofarads DT property for quartz load capacitance - remove rtc_class_ops.read_callback New drivers: - Abracon AB-RTCMC-32.768kHz-EOZ9 - Amlogic Meson RTC - Cadence RTC IP - Microcrystal RV3028 - Whwave sd3078 Drivers: - cmos: ignore bogus century byte - ds1307: rework rx8130 support - isl1208: add isl1209 support, nvmem support - rs5C372: report invalid time when the oscillator stopped - rx8581: add rx8571 support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlyATtkACgkQAyWl4gNJ NJIEOA//eZgauZj9tft1lTCfHDRQoxpcGzmTrLOX3W/s3n6SQgd31YQmTrsoBRbB kjP/qOuSLiZi6bmwBWkLN7fU/eUa433iqxbNpA8tAo0TzrCkm/YBln5ozVmonQ+F Vm4n5NKlTCJSb55Gzil+oEj1/Ly8d10IBLslhuZl23BEPmGCRm4E5SoiwdyAGzX2 APth4X88BtwzmNNjvP6BgoW19aDQDyugHK6xP8vTa2rv34pPrhuBARbBP8WQDkM+ NVqimUH/+i+uj7U5HEKClL0acG20KKNorz3BQeKUFUrwWHFq3IfdkRMBXRAH8OKl gmyktZJmgROdCywD27mW5dmm+kCqVyB8NoxRidADZWPuuITzlZSM6zLOt5mrmKhX WMCWBk1Ol3gJNbIcX4GXrEytiZLeFGonk5FMRTX2U7wWGCA1bZxJPkTgwLUIzUZE PX5G8SIs/3YkL2/0FeRAS16oK1EI1XXUOenVXfdwJqeMeQ8wSGIh9Sp3XDe0v6EZ mtcCTQFi1EJWcVBERUOo7iRoSGbohQWmQeO01J8aUkj7SpTG429csESOeBGYRS24 FEtiPG2DPz1sj0gLQ2yp1H8h4mdtn4uODbewN/TRXIqB9Th6UvR8UbfB9v/qJozY KyCpONuHctGd0CLXa0Gb09t8qxht9wT1ixajTqirsVce5l2WGDU= =/Noj -----END PGP SIGNATURE----- Merge tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is an unusual amount of new drivers this cycle, and this explains the number of insertions. Other than that, the changes are the usual fixes and feature addition. Subsystem updates: - new quartz-load-femtofarads DT property for quartz load capacitance - remove rtc_class_ops.read_callback New drivers: - Abracon AB-RTCMC-32.768kHz-EOZ9 - Amlogic Meson RTC - Cadence RTC IP - Microcrystal RV3028 - Whwave sd3078 Driver updates: - cmos: ignore bogus century byte - ds1307: rework rx8130 support - isl1208: add isl1209 support, nvmem support - rs5C372: report invalid time when the oscillator stopped - rx8581: add rx8571 support" * tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits) rtc: pic32: convert to SPDX identifier rtc: pic32: let the core handle range rtc: pic32: convert to devm_rtc_allocate_device rtc: update my email address rtc: rv8803: convert to SPDX identifier rtc: rv8803: let the core handle range rtc: tx4939: convert to SPDX identifier rtc: tx4939: use .set_time rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: tx4939: set range rtc: tx4939: remove useless test rtc: zynqmp: let the core handle range rtc: zynqmp: fix possible race condition rtc: imx-sc: use rtc_time64_to_tm rtc: rx8581: Add support for Epson rx8571 RTC dt-bindings: rtc: add rx8571 compatible rtc: pcf85063: remove dead code rtc: remove rtc_class_ops.read_callback rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support dt-bindings: rtc: add ABEOZ9 ... |
||
|
Linus Torvalds
|
9f24a81e2e |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal soc updates from Eduardo Valentin: "Specifics: - mediatek thermal now supports MT8183 - broadcom thermal now supports Stingray - qoirq now supports multiple sensors - fixes on different drivers: rcar, tsens, tegra Some new drivers are still pending further review and I chose to leave them for the next merge window while still sending this material" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: rcar_gen3_thermal: Register hwmon sysfs interface thermal/qcom/tsens-common : fix possible object reference leak thermal: tegra: add get_trend ops thermal: tegra: fix memory allocation thermal: tegra: remove unnecessary warnings thermal: mediatek: add support for MT8183 dt-bindings: thermal: add binding document for mt8183 thermal controller thermal: mediatek: add flag for bank selection thermal: mediatek: add thermal controller offset thermal: mediatek: add calibration item thermal: mediatek: add common index of vts settings. thermal: mediatek: fix register index error thermal: qoriq: add multiple sensors support thermal: broadcom: Add Stingray thermal driver dt-bindings: thermal: Add binding document for SR thermal |
||
|
Linus Torvalds
|
6c3f98fadd |
Merge branch 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - the I2C core gained helpers to assist drivers in handling their suspended state, and drivers were converted to use it - two new fault-injectors for stress-testing - bigger refactoring and feature improvements for the ocores, sh_mobile, and tegra drivers - platform_data removal for the at24 EEPROM driver - ... and various improvements and bugfixes all over the subsystem * 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits) i2c: Allow recovery of the initial IRQ by an I2C client device. i2c: ocores: turn incomplete kdoc into a comment i2c: designware: Do not allow i2c_dw_xfer() calls while suspended i2c: tegra: Only display error messages if DMA setup fails i2c: gpio: fault-injector: add 'inject_panic' injector i2c: gpio: fault-injector: add 'lose_arbitration' injector i2c: tegra: remove multi-master support i2c: tegra: remove master fifo support on tegra186 i2c: tegra: change phrasing, "fallbacking" to "falling back" i2c: expand minor range when registering chrdev region i2c: aspeed: Add multi-master use case support i2c: core-smbus: don't trace smbus_reply data on errors i2c: ocores: Add support for bus clock via platform data i2c: ocores: Add support for IO mapper registers. i2c: ocores: checkpatch fixes i2c: ocores: add SPDX tag i2c: ocores: add polling interface i2c: ocores: do not handle IRQ if IF is not set i2c: ocores: stop transfer on timeout i2c: tegra: add i2c interface timing support ... |
||
|
Linus Torvalds
|
1cabd3e0bd |
power supply and reset changes for the v5.1 series
* at91-reset: add sam9x60 support * sc27xx: improve capacity logic * goldfish_battery: enhance driver by adding many new properties * isp1704: drop platform data and migrate to gpiod * misc. small fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlx+8LYACgkQ2O7X88g7 +prQew//RFv4KDosWXjxJ+2FgjYke8sjwf8oRN6CD2PyYdX0JY8O4fIucqGn6w+d Xvw/JBTpV+e3J8C0ZEYC7eN3wbgFh+pBI1TYa+gepMLsgv/uqGCuBGQPJoddkiLy AjTIDITBMDBJonQEmuxMxbA+FmnJ0FxLKOl6EInesDIU1UiEiMsmkDRU9gj88PQQ DplsADjw8L5ktGvjfj11HY/iTAaJwSPa3X0jhpBpiR6zJs2iqN4JHYunoTm7ss+i NSh19haS5E1yifRMmF8QTHXZB4KmaNGNSL2MFU7fwTP+tkZpn/MjWlTE57IuzT8v MIGVoXZMsvWDIaMc9SRnYaQ2rFD+A3Z8fkXm5KYZdjvNtDe2y7R+omWjAaHHUOME Nctj0qY4UcS4820LnZUsg8txsu7oDTpnh4GST5w9rBGtYqWrdAZ+B8e/a8bqO1Rt 2mUQdjIGSKzzamBJDswY26gFm0VozwND3WE8aKNFfFK2M6kkM1vqmqpV/QIpjBOY QzhbGf3vMJbqfwmyrBbmkLbjlY02XAmxM7h0wlwVLg2vGz/9LOf5ilpdHu2YxLHL OXB+RMQudgDou665Gc55PD5NwpJQGU2vImxIHjPUYrYOOwVfDci2MWyxxiFL+bEd Bk62pNOVmsPmXkRXp8+1e02nta/dwtle1oTGFtqRN7v3RynMTM4= =Etl6 -----END PGP SIGNATURE----- Merge tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Nothing too fancy in the power-supply subsystem this time. There are less patches than usual, since I did not have enough time to review them in time. The good news is, that all patches have been in linux-next for more than two weeks and there are no complicated cross-subsystem patchsets this time! Summary: - at91-reset: add sam9x60 support - sc27xx: improve capacity logic - goldfish_battery: enhance driver by adding many new properties - isp1704: drop platform data and migrate to gpiod - misc small fixes and improvements" * tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits) power: reset: at91-reset: add support for sam9x60 SoC dt-bindings: arm: atmel: add new sam9x60 reset controller binding dt-bindings: arm: atmel: add missing samx7 to reset controller max17042_battery: fix potential use-after-free on device remove power: supply: core: Add a field to support battery max voltage dt-bindings: power: supply: Add voltage-max-design-microvolt property bq27x00: use cached flags power: supply: ds2782: fix possible use-after-free on remove power: supply: bq25890: show max charge current/voltage as configured power: supply: sc27xx: Fix capacity saving function power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter power: supply: sc27xx: Add one property to read charge voltage dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage drivers: power: supply: goldfish_battery: Add support for reading more properties power: supply: charger-manager: Fix trivial language typos cpcap-charger: generate events for userspace power: supply: remove some duplicated includes power: twl4030: fix a missing check of return value drivers: power: supply: goldfish_battery: Use tabs for alignment drivers: power: supply: goldfish_battery: Fix alignment ... |
||
|
Linus Torvalds
|
1b37b8c48d |
* A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)
* New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck) * Altera SDRAM functionality carveout for separate enablement of RAS and SDRAM capabilities on some Altera chips. (Thor Thayer) * The usual round of cleanups and fixes Last but not least: * Recruit James Morse as a reviewer for the ARM side -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlx+SqYACgkQEsHwGGHe VUpwxg//fDdlIcnNjPUKWcBQxfy7meFd5xlDwbbIbkdE1mfHLBP6n2gRVM9NguSm shYPXcdqIrFTn4D7nOxVLS2Gqa7cF/j9M+YaqTNfe9/OVI0oSeM84D2+kEUi2tHQ LkCbBL9W+SAk4wjcFUPrEuwPaABfPdt0g9wuEf3Yg+PQsZ4FojwF7p91plBiKo/X GewLIM4+QT/mIkyn5u+2UJWayUvtdc1nchBGg3klYaDTRsUqH9pn284bInj7/Woj r34288yXuksIhDnUd2h4F9RCdZegBLIZf/k7Rqdg+Acot64c3PprE+/SI9nFcYfn fcF/48Sv6vMfP5kDKeJhsDjWu85VdpP+Cp4bxebXx4NURWn30kyYGDdpvbpgWxzc XDOXiEDxfh43/dNEyqCRr86dcZS8ro1pQNlnQvxOJyMljdEGjbB4JizG2ZvVluBP hSu3ifgpTiBGJMRQQijha41SMuWE7Z1ZgZt/XnyPAKwEEFtQVrm7IfnDohag3VYw 6kWMVeyenmx/yF1JmA0fTxAdeeZPMnbUx0JxHRo1wJXF+1b19b0P+1nYUjgKlXQN Wq78DGPkQ9InfISFegS/A2AMWk+ZgLZ5d4pVwRVWdyeOMQVUoXO4R3KQur1tV7gu vm5BpWRZUszhcVvuhly8fOTyOsudYsNe7EeMd2V0Q2FZBy81MH8= =A1kA -----END PGP SIGNATURE----- Merge tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC updates from Borislav Petkov: - A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler) - New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck) - Altera SDRAM functionality carveout for separate enablement of RAS and SDRAM capabilities on some Altera chips. (Thor Thayer) - The usual round of cleanups and fixes And last but not least: recruit James Morse as a reviewer for the ARM side. * tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC/altera: Add separate SDRAM EDAC config EDAC, altera: Add missing of_node_put() EDAC, skx_common: Add code to recognise new compound error code EDAC, i10nm: Fix randconfig builds EDAC, i10nm: Add a driver for Intel 10nm server processors EDAC, skx_edac: Delete duplicated code EDAC, skx_common: Separate common code out from skx_edac EDAC: Do not check return value of debugfs_create() functions EDAC: Add James Morse as a reviewer dt-bindings, EDAC: Add Aspeed AST2500 EDAC, aspeed: Add an Aspeed AST2500 EDAC driver |
||
|
Linus Torvalds
|
851ca779d1 |
drm next pull request for 5.1
-----BEGIN PGP SIGNATURE-----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=GlRQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for the 5.1 merge window.
The big changes I'd highlight are:
- nouveau has HMM support now, there is finally an in-tree user so we
can quieten down the rip it out people.
- i915 now enables fastboot by default on Skylake+
- Displayport Multistream support has been refactored and should
hopefully be more reliable.
Core:
- header cleanups aiming towards removing drmP.h
- dma-buf fence seqnos to 64-bits
- common helper for DP mst hotplug for radeon,i915,amdgpu + new
refcounting scheme
- MST i2c improvements
- drm_syncobj_cb removal
- ARM FB compression fourcc
- P010 + P016 fourcc
- allwinner tiled format modifier
- i2c over aux I2C_M_STOP support
- DRM_AUTH handling fixes
TTM:
- ref/unref renaming
New driver:
- ARM komeda display driver
scheduler:
- refactor mirror list handling
- rework hw fence processing
- 0 run queue entity fix
bridge:
- TI DS90C185 LVDS bridge
- thc631lvdm83d bridge improvements
- cadence + allwinner DSI ported to generic phy
panels:
- Sitronix ST7701 panel
- Kingdisplay KD097D04
- LeMaker BL035-RGB-002
- PDA 91-00156-A0
- Innolux EE101IA-01D
i915:
- Enable fastboot by default on SKL+/VLV/CHV
- Export RPCS configuration for ICL media driver
- Coffelake PCI ID
- CNL clocks setup fixes
- ACPI/PMIC support for MIPI/DSI
- Per-engine WA init for all engines
- Shrinker locking fixes
- Kerneldoc updates
- Lots of ring improvements and reset fixes
- Coffeelake GVT Support
- VFIO GVT EDID Region support
- runtime PM wakeref tracking
- ILK->IVB primary plane enable delays
- userptr mutex locking fixes
- DSI fixes
- LVDS/TV cleanups
- HW readout fixes
- LUT robustness fixes
- ICL display and watermark fixes
- gem mmap race fix
amdgpu:
- add scheduled dependencies interface
- DCC on scanout surfaces
- vega10/20 BACO support
- Multiple IH rings on soc15
- XGMI locking fixes
- DC i2c/aux cleanups
- runtime SMU debug interface
- Kexec improvmeents
- SR-IOV fixes
- DC freesync + ABM fixes
- GDS fixes
- GPUVM fixes
- vega20 PCIE DPM switching fixes
- Context priority handling fixes
radeon:
- fix missing break in evergreen parser
nouveau:
- SVM support via HMM
msm:
- QCOM Compressed modifier support
exynos:
- s5pv210 rotator support
imx:
- zpos property support
- pending update fixes
v3d:
- cache flush improvments
vc4:
- reflection support
- HDMI overscan support
tegra:
- CEC refactoring
- HDMI audio fixes
- Tegra186 prep work
- SOR crossbar device tree fixes
sun4i:
- implicit fencing support
- YUV and scalar support improvements
- A23 support
- tiling fixes
atmel-hlcdc:
- clipping and rotation property fixes
qxl:
- BO and PRIME improvements
- generic fbdev emulation
dw-hdmi:
- HDMI 2.0 2160p
- YUV420 ouput
rockchip:
- implicit fencing support
- reflection proerties
virtio-gpu:
- use generic fbdev emulation
tilcdc:
- cpufreq vs crtc init fix
rcar-du:
- R8A774C0 support
- D3/E3 RGB output routing fixes and DPAD0 support
- RA87744 LVDS support
bochs:
- atomic and generic fbdev emulation
- ID mismatch error on bochs load
meson:
- remove firmware fbs"
* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
drm/amd/display: Use vrr friendly pageflip throttling in DC.
drm/imx: only send commit done event when all state has been applied
drm/imx: allow building under COMPILE_TEST
drm/imx: imx-tve: depend on COMMON_CLK
drm/imx: ipuv3-plane: add zpos property
drm/imx: ipuv3-plane: add function to query atomic update status
gpu: ipu-v3: prg: add function to get channel configure status
gpu: ipu-v3: pre: add double buffer status readback
drm/amdgpu: Bump amdgpu version for context priority override.
drm/amdgpu/powerplay: fix typo in BACO header guards
drm/amdgpu/powerplay: fix return codes in BACO code
drm/amdgpu: add missing license on baco files
drm/bochs: Fix the ID mismatch error
drm/nouveau/dmem: use dma addresses during migration copies
drm/nouveau/dmem: use physical vram addresses during migration copies
drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
drm/nouveau/dmem: device memory helpers for SVM
drm/nouveau/svm: initial support for shared virtual memory
drm/nouveau: prepare for enabling svm with existing userspace interfaces
...
|
||
|
Wendy Liang
|
abdd85b6ba |
dt-bindings: mailbox: Add Xilinx IPI Mailbox
Xilinx ZynqMP IPI(Inter Processor Interrupt) is a hardware block in ZynqMP SoC used for the communication between various processor systems. Signed-off-by: Wendy Liang <wendy.liang@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
||
|
Linus Torvalds
|
f90d64483e |
USB/PHY patches for 5.1-rc1
Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates (you will have a merge issue with Kconfig and Makefile), xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia 8FTdneQfN2J8Hhc6KGXE =Kx9I -----END PGP SIGNATURE----- Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ... |
||
|
Linus Torvalds
|
67e79a6dc2 |
TTY/Serial patches for 5.1-rc1
Here is the "big" patchset for the tty/serial driver layer for 5.1-rc1. It's really not all that big, nothing major here. There are a lot of tiny driver fixes and updates, combined with other cleanups for different serial drivers and the vt layer. Full details are in the shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+g7A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymoRgCgy8MZ6vayopxNdRBnp4mMmgtaVYMAoMIPYq0V XuhV/ZSENWdef2QuaJ3O =nSZk -----END PGP SIGNATURE----- Merge tag 'tty-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the "big" patchset for the tty/serial driver layer for 5.1-rc1. It's really not all that big, nothing major here. There are a lot of tiny driver fixes and updates, combined with other cleanups for different serial drivers and the vt layer. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'tty-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (70 commits) tty: xilinx_uartps: Correct return value in probe serial: sprd: Modify the baud rate calculation formula dt-bindings: serial: Add Milbeaut serial driver description serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart serial: 8250_pxa: honor the port number from devicetree tty: hvc_xen: Mark expected switch fall-through tty: n_gsm: Mark expected switch fall-throughs tty: serial: msm_serial: Remove __init from msm_console_setup() tty: serial: samsung: Enable baud clock during initialisation serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO tty: serial: remove redundant likely annotation tty/n_hdlc: mark expected switch fall-through serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup() serial: 8250_pci: Fix number of ports for ACCES serial cards vt: perform safe console erase in the right order tty/nozomi: use pci_iomap instead of ioremap_nocache tty/synclink: remove ISA support serial: 8250_pci: Replace custom code with pci_match_id() serial: max310x: Correction of the initial setting of the MODE1 bits for various supported ICs. serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown ... |
||
|
Linus Torvalds
|
e266ca36da |
Staging/IIO patches for 5.1-rc1
Here is the big staging/iio driver pull request for 5.1-rc1. Lots of good IIO driver updates and cleanups in here as always. Combined with the removal of the xgifb driver, we have a net "loss" of over 9000 lines in the pull request, always a nice thing. As the outreachy application process is currently happening, there are loads of tiny checkpatch cleanup fixes all over the staging tree, which accounts for the majority of the fixups. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+gLQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymBiQCeJpoBhG+W3r+kP8w65ZY8qU+/liIAn0Tkl4/k IX1dQzCsEpO1jA8AHj6n =7wCH -----END PGP SIGNATURE----- Merge tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big staging/iio driver pull request for 5.1-rc1. Lots of good IIO driver updates and cleanups in here as always. Combined with the removal of the xgifb driver, we have a net "loss" of over 9000 lines in the pull request, always a nice thing. As the outreachy application process is currently happening, there are loads of tiny checkpatch cleanup fixes all over the staging tree, which accounts for the majority of the fixups" * tag 'staging-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: mt7621-dma: remove license boilerplate text staging: mt7621-dma: add SPDX GPL-2.0+ license identifier Staging: ks7010: Replace typecast to int Staging: vt6655: Align a static function declaration staging: speakup: fix line over 80 characters. staging: mt7621-eth: Remove license boilerplate text staging: mt7621-eth: Add SPDX license identifier staging: ks7010: removed custom Michael MIC implementation. staging: rtl8192e: Fix space and suspect issue Staging: vt6655: Modify comment style of SPDX License Identifier Staging: vt6655: Modify comment style for SPDX-License-Identifier Staging: vt6655: Align a function declaration Staging: vt6655: Alignment of function declaration staging: rtl8712: Fix indentation issue staging: wilc1000: fix incorrent type in initializer staging: rtl8188eu: remove unused P2P_PRIVATE_IOCTL_SET_LEN staging: rtl8188eu: remove unused enum P2P_PROTO_WK_ID staging: rtl8723bs: Remove duplicated include from drv_types.h Staging: vt6655: Alignment should match open parenthesis staging: erofs: fix mis-acted TAIL merging behavior ... |
||
|
Linus Torvalds
|
45763bf4bc |
Char/Misc driver patches for 5.1-rc1
Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+dPQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ym1fACgvpZAxjNzoRQJ6f06tc8ujtPk9rUAnR+tCtrZ 9e3l7H76oe33o96Qjhor =8A2k -----END PGP SIGNATURE----- Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ... |
||
|
Linus Torvalds
|
da2577fe63 |
sound updates for 5.1
We had again a busy development cycle with many new drivers as well as
lots of core improvements / cleanups. Let's go for highlights:
ALSA core:
- PCM locking scheme was refactored for reducing a global rwlock
- PCM suspend is handled in the device type PM ops now; lots of
explicit calls were reduced by this action
- Cleanups about PCM buffer preallocation calls
- Kill NULL device object in memory allocations
- Lots of procfs API cleanups
ASoC core:
- Support for only powering up channels that are actively being used
- Cleanups / fixes of topology API
ASoC drivers:
- MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
driver we've had upstream!
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers
- Lots of fixes for probing on Intel systems to follow more standard
styles
- A big refresh and cleanup of the Samsung drivers
- New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
formatters
ALSA drivers:
- Improvements of Tegra HD-audio controller driver for supporting new
chips
- HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
headset button support and Dell workstations
- Improved DSD support on USB-audio
- Quirk for MOTU MicroBook II USB-audio
- Support for Fireface UCX support and Solid State Logic Duende
Classic/Mini
-----BEGIN PGP SIGNATURE-----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=Vh8O
-----END PGP SIGNATURE-----
Merge tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We had again a busy development cycle with many new drivers as well as
lots of core improvements / cleanups. Let's go for highlights:
ALSA core:
- PCM locking scheme was refactored for reducing a global rwlock
- PCM suspend is handled in the device type PM ops now; lots of
explicit calls were reduced by this action
- Cleanups about PCM buffer preallocation calls
- Kill NULL device object in memory allocations
- Lots of procfs API cleanups
ASoC core:
- Support for only powering up channels that are actively being used
- Cleanups / fixes of topology API
ASoC drivers:
- MediaTek BTCVSD for a Bluetooth radio chip, which is the first such
driver we've had upstream!
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers
- Lots of fixes for probing on Intel systems to follow more standard
styles
- A big refresh and cleanup of the Samsung drivers
- New drivers: Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341
and CS35L26, Google ChromeOS embedded controllers, Ingenic JZ4725B,
MediaTek BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328,
Spreadtrum DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM
formatters
ALSA drivers:
- Improvements of Tegra HD-audio controller driver for supporting new
chips
- HD-audio codec quirks for ALC294 S4 resume, ASUS laptop, Chrome
headset button support and Dell workstations
- Improved DSD support on USB-audio
- Quirk for MOTU MicroBook II USB-audio
- Support for Fireface UCX support and Solid State Logic Duende
Classic/Mini"
* tag 'sound-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (461 commits)
ALSA: usb-audio: Add quirk for MOTU MicroBook II
ASoC: stm32: i2s: skip useless write in slave mode
ASoC: stm32: i2s: fix race condition in irq handler
ASoC: stm32: i2s: remove useless callback
ASoC: stm32: i2s: fix dma configuration
ASoC: stm32: i2s: fix stream count management
ASoC: stm32: i2s: fix 16 bit format support
ASoC: stm32: i2s: fix IRQ clearing
ASoC: qcom: Kconfig: fix dependency for sdm845
ASoC: Intel: Boards: Add Maxim98373 support
ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register address
ALSA: firewire-motu: fix construction of PCM frame for capture direction
ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against Liquid Saffire 56
ALSA: hda: Extend i915 component bind timeout
ASoC: wm_adsp: Improve logging messages
ASoC: wm_adsp: Add support for multiple compressed buffers
ASoC: wm_adsp: Refactor compress stream initialisation
ASoC: wm_adsp: Reorder some functions for improved clarity
ASoC: wm_adsp: Factor out stripping padding from ADSP data
ASoC: cs35l36: Fix an IS_ERR() vs NULL checking bug
...
|