Netronome graciously transferred the original NIPA repo
to our new netdev umbrella org. Link to that instead of
my private fork.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240216161945.2208842-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Make an unregister in case of unsuccessful registration.
Fixes: 687125b579 ("devlink: split out core code")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e59 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel
code base has been converted to flexible arrays. In order to enforce
the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized
destinations need to be handled. Unfortunately, struct vic_provinfo
resists full conversion, as it contains a flexible array of flexible
arrays, which is only possible with the 0-sized fake flexible array.
Use unsafe_memcpy() to avoid future false positives under
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since there is a utility available for this, use
the API rather than open code.
Fixes: 13943d6c82 ("ionic: prevent pci disable of already disabled device")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bond priority testing, we set the primary interface to eth1 and add
eth0,1,2 to bond in serial. This is OK in normal times. But when in
debug kernel, the bridge port that eth0,1,2 connected would start
slowly (enter blocking, forwarding state), which caused the primary
interface down for a while after enslaving and active slave changed.
Here is a test log from Jakub's debug test[1].
[ 400.399070][ T50] br0: port 1(s0) entered disabled state
[ 400.400168][ T50] br0: port 4(s2) entered disabled state
[ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one
[ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link
[ 400.943633][ T2766] br0: port 1(s0) entered blocking state
[ 400.944119][ T2766] br0: port 1(s0) entered forwarding state
[ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one
[ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link
[ 401.131643][ T69] br0: port 2(s1) entered blocking state
[ 401.132067][ T69] br0: port 2(s1) entered forwarding state
[ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link
[ 401.348414][ T50] br0: port 4(s2) entered blocking state
[ 401.348857][ T50] br0: port 4(s2) entered forwarding state
[ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave
[ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave
[ 401.526986][ T250] bond0: (slave eth2): making interface the new active one
[ 401.629470][ T250] bond0: (slave eth0): link status definitely up
[ 401.630089][ T250] bond0: (slave eth1): link status definitely up
[...]
# TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL]
# Current active slave is eth2 but not eth1
Fix it by setting active slave to primary slave specifically before
testing.
[1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout
Fixes: 481b56e039 ("selftests: bonding: re-format bond option tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Justin Chen says:
====================
net: bcmasp: bug fixes for bcmasp
Fix two bugs.
- Indicate that PM is managed by mac to prevent double pm calls. This
doesn't lead to a crash, but waste a noticable amount of time
suspending/resuming.
- Sanity check for OOB write was off by one. Leading to a false error
when using the full array.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A sanity check for OOB write is off by one leading to a false positive
when the array is full.
Fixes: 9b90aca97f ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The ASP driver
essentially does exactly what mdio_bus_phy_resume() does.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: misc. fixes for v6.8
This series includes 4 types of fixes:
Patches 1 and 2 force the path-managers not to allocate a new address
entry when dealing with the "special" ID 0, reserved to the address of
the initial subflow. These patches can be backported up to v5.19 and
v5.12 respectively.
Patch 3 to 6 fix the in-kernel path-manager not to create duplicated
subflows. Patch 6 is the main fix, but patches 3 to 5 are some kind of
pre-requisities: they fix some data races that could also lead to the
creation of unexpected subflows. These patches can be backported up to
v5.7, v5.10, v6.0, and v5.15 respectively.
Note that patch 3 modifies the existing ULP API. No better solutions
have been found for -net, and there is some similar prior art, see
commit 0df48c26d8 ("tcp: add tcpi_bytes_acked to tcp_info"). Please
also note that TLS ULP Diag has likely the same issue.
Patches 7 to 9 fix issues in the selftests, when executing them on older
kernels, e.g. when testing the last version of these kselftests on the
v5.15.148 kernel as it is done by LKFT when validating stable kernels.
These patches only avoid printing expected errors the console and
marking some tests as "OK" while they have been skipped. Patches 7 and 8
can be backported up to v6.6.
Patches 10 to 13 make sure all MPTCP selftests subtests have a unique
name. It is important to have a unique (sub)test name in TAP, because
that's the test identifier. Some CI environments might drop tests with
duplicated names. Patches 10 to 12 can be backported up to v6.6.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'cestab' subtests from the diag selftest had the same names, e.g.:
....chk 0 cestab
Now the previous value is taken, to have different names, e.g.:
....chk 2->0 cestab after flush
While at it, the 'after flush' info is added, similar to what is done
with the 'in use' subtests. Also inspired by these 'in use' subtests,
'many' is displayed instead of a large number:
many msk socket present [ ok ]
....chk many msk in use [ ok ]
....chk many cestab [ ok ]
....chk many->0 msk in use after flush [ ok ]
....chk many->0 cestab after flush [ ok ]
Fixes: 81ab772819 ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'in use' subtests from the diag selftest had the same names, e.g.:
chk 0 msk in use after flush
Now the previous value is taken, to have different names, e.g.:
chk 2->0 msk in use after flush
While at it, avoid repeating the full message, declare it once in the
helper.
Fixes: ce99025736 ("selftests: mptcp: diag: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated names.
Some subtests from the userspace_pm selftest had the same names. That's
because different subflows are created (and deleted) between the same
pair of IP addresses.
Simply adding the destination port in the name is then enough to have
different names, because the destination port is always different.
Note that adding such info takes a bit more space, so we need to
increase a bit the width to print the name, simply to keep all the
'[ OK ]' aligned as before.
Fixes: f589234e1a ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftest was correctly recording all the results, but the 'reverse
direction' part was missing in the name when needed.
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Fixes: 675d99338e ("selftests: mptcp: simult flows: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the 'Fixes' commit mentioned below, the command that is executed
in __chk_nr() helper can return nothing if the feature is not supported.
This is the case when the MPTCP CURRESTAB counter is not supported.
To avoid this warning ...
./diag.sh: line 65: [: !=: unary operator expected
... we just need to surround '$nr' with double quotes, to support an
empty string when the feature is not supported.
Fixes: 81ab772819 ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the 'Fixes' commit mentioned below, and if the kernel being tested
doesn't support the 'fullmesh' flag, this error will be printed:
netlink error -22 (Invalid argument)
./pm_nl_ctl: bailing out due to netlink error[s]
But that can be normal if the kernel doesn't support the feature, no
need to print this worrying error message while everything else looks
OK. So we can mute stderr. Failures will still be detected if any.
Fixes: 1dc88d241f ("selftests: mptcp: pm_nl_ctl: always look for errors")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the feature is not supported by older kernels, and instead of just
ignoring some tests, we should mark them as skipped, so we can still
track them.
Fixes: d85555ac11 ("selftests: mptcp: pm_netlink: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fullmesh endpoints could end-up unexpectedly generating duplicate
subflows - same local and remote addresses - when multiple incoming
ADD_ADDR are processed before the PM creates the subflow for the local
endpoints.
Address the issue explicitly checking for duplicates at subflow
creation time.
To avoid a quadratic computational complexity, track the unavailable
remote address ids in a temporary bitmap and initialize such bitmap
with the remote ids of all the existing subflows matching the local
address currently processed.
The above allows additionally replacing the existing code checking
for duplicate entry in the current set with a simple bit test
operation.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the previous patch, address the data race on
remote_id, adding the suitable ONCE annotations.
Fixes: bedee0b561 ("mptcp: address lookup improvements")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The local address id is accessed lockless by the NL PM, add
all the required ONCE annotation. There is a caveat: the local
id can be initialized late in the subflow life-cycle, and its
validity is controlled by the local_id_valid flag.
Remove such flag and encode the validity in the local_id field
itself with negative value before initialization. That allows
accessing the field consistently with a single read operation.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just the same as userspace PM, a new parameter needs_id is added for
in-kernel PM mptcp_pm_nl_append_new_local_addr() too.
Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address
ID is set from PM or not.
In mptcp_pm_nl_get_local_id(), needs_id is always true, but in
mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to
needs_it.
Fixes: efd5a4c04e ("mptcp: add the address ID assignment bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When userspace PM requires to create an ID 0 subflow in "userspace pm
create id 0 subflow" test like this:
userspace_pm_add_sf $ns2 10.0.3.2 0
An ID 1 subflow, in fact, is created.
Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as
no ID is set by userspace, and will allocate a new ID immediately:
if (!e->addr.id)
e->addr.id = find_next_zero_bit(pernet->id_bitmap,
MPTCP_PM_MAX_ADDR_ID + 1,
1);
To solve this issue, a new parameter needs_id is added for
mptcp_userspace_pm_append_new_local_addr() to distinguish between
whether userspace PM has set an ID 0 or whether userspace PM has
not set any address.
needs_id is true in mptcp_userspace_pm_get_local_id(), but false in
mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit().
Fixes: e5ed101a60 ("mptcp: userspace pm allow creating id 0 subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
inet: fix NLM_F_DUMP_INTR logic
Make sure NLM_F_DUMP_INTR is generated if dev_base_seq and
dev_addr_genid are changed by the same amount.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 0465277f6b ("ipv4: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address
when dereferencing calling netdev_err().
Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument
to request_irq() during interrupt initialization (that is, the net_device
and rx/tx queue pointers initialized at the time of the call) and since
there are usually no checks for the 'dev_id' argument in such handlers
in other drivers, remove these checks from the handlers in stmmac driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8532f613bc ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we're redirecting the skb, and haven't called tcf_mirred_forward(),
yet, we need to tell the core to drop the skb by setting the retcode
to SHOT. If we have called tcf_mirred_forward(), however, the skb
is out of our hands and returning SHOT will lead to UaF.
Move the retval override to the error path which actually need it.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Fixes: e5cf1baf92 ("act_mirred: use TC_ACT_REINSERT when possible")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test Davide added in commit ca22da2fbd ("act_mirred: use the backlog
for nested calls to mirred ingress") hangs our testing VMs every 10 or so
runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by
lockdep.
The problem as previously described by Davide (see Link) is that
if we reverse flow of traffic with the redirect (egress -> ingress)
we may reach the same socket which generated the packet. And we may
still be holding its socket lock. The common solution to such deadlocks
is to put the packet in the Rx backlog, rather than run the Rx path
inline. Do that for all egress -> ingress reversals, not just once
we started to nest mirred calls.
In the past there was a concern that the backlog indirection will
lead to loss of error reporting / less accurate stats. But the current
workaround does not seem to address the issue.
Fixes: 53592b3640 ("net/sched: act_mirred: Implement ingress actions")
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver uses functions that are supplied by the Kconfig symbol
PHYLIB, so select it to ensure that they are built as needed.
When CONFIG_ADIN1110=y and CONFIG_PHYLIB=m, there are multiple build
(linker) errors that are resolved by this Kconfig change:
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_open':
drivers/net/ethernet/adi/adin1110.c:933: undefined reference to `phy_start'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_probe_netdevs':
drivers/net/ethernet/adi/adin1110.c:1603: undefined reference to `get_phy_device'
ld: drivers/net/ethernet/adi/adin1110.c:1609: undefined reference to `phy_connect'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy':
drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect'
ld: drivers/net/ethernet/adi/adin1110.o: in function `devm_mdiobus_alloc':
include/linux/phy.h:455: undefined reference to `devm_mdiobus_alloc_size'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_register_mdiobus':
drivers/net/ethernet/adi/adin1110.c:529: undefined reference to `__devm_mdiobus_register'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_stop':
drivers/net/ethernet/adi/adin1110.c:958: undefined reference to `phy_stop'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy':
drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_adjust_link':
drivers/net/ethernet/adi/adin1110.c:1077: undefined reference to `phy_print_status'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_ioctl':
drivers/net/ethernet/adi/adin1110.c:790: undefined reference to `phy_do_ioctl'
ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf60): undefined reference to `phy_ethtool_get_link_ksettings'
ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf68): undefined reference to `phy_ethtool_set_link_ksettings'
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402070626.eZsfVHG5-lkp@intel.com/
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz says:
====================
net: bridge: switchdev: Ensure MDB events are delivered exactly once
When a device is attached to a bridge, drivers will request a replay
of objects that were created before the device joined the bridge, that
are still of interest to the joining port. Typical examples include
FDB entries and MDB memberships on other ports ("foreign interfaces")
or on the bridge itself.
Conversely when a device is detached, the bridge will synthesize
deletion events for all those objects that are still live, but no
longer applicable to the device in question.
This series eliminates two races related to the synching and
unsynching phases of a bridge's MDB with a joining or leaving device,
that would cause notifications of such objects to be either delivered
twice (1/2), or not at all (2/2).
A similar race to the one solved by 1/2 still remains for the
FDB. This is much harder to solve, due to the lockless operation of
the FDB's rhashtable, and is therefore knowingly left out of this
series.
v1 -> v2:
- Squash the previously separate addition of
switchdev_port_obj_act_is_deferred into first consumer.
- Use ether_addr_equal to compare MAC addresses.
- Document switchdev_port_obj_act_is_deferred (renamed from
switchdev_port_obj_is_deferred in v1, to indicate that we also match
on the action).
- Delay allocations of MDB objects until we know they're needed.
- Use non-RCU version of the hash list iterator, now that the MDB is
not scanned while holding the RCU read lock.
- Add Fixes tag to commit message
v2 -> v3:
- Fix unlocking in error paths
- Access RCU protected port list via mlock_dereference, since MDB is
guaranteed to remain constant for the duration of the scan.
v3 -> v4:
- Limit the search for exiting deferred events in 1/2 to only apply to
additions, since the problem does not exist in the deletion case.
- Add 2/2, to plug a related race when unoffloading an indirectly
associated device.
v4 -> v5:
- Fix grammatical errors in kerneldoc of
switchdev_port_obj_act_is_deferred
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When unoffloading a device, it is important to ensure that all
relevant deferred events are delivered to it before it disassociates
itself from the bridge.
Before this change, this was true for the normal case when a device
maps 1:1 to a net_bridge_port, i.e.
br0
/
swp0
When swp0 leaves br0, the call to switchdev_deferred_process() in
del_nbp() makes sure to process any outstanding events while the
device is still associated with the bridge.
In the case when the association is indirect though, i.e. when the
device is attached to the bridge via an intermediate device, like a
LAG...
br0
/
lag0
/
swp0
...then detaching swp0 from lag0 does not cause any net_bridge_port to
be deleted, so there was no guarantee that all events had been
processed before the device disassociated itself from the bridge.
Fix this by always synchronously processing all deferred events before
signaling completion of unoffloading back to the driver.
Fixes: 4e51bf44a0 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions.
Fixes: 4f2673b3a2 ("net: bridge: add helper to replay port and host-joined mdb entries")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively
set MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields,
fix races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag
when some of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YRod
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZc4pdgAKCRCAXGG7T9hj
vjgQAP9PPdhNUaSt5bHNSJi+s4QbC9n2pNiZrfG0tsNzvEoENQD/Tbb9ff34MkRk
A9045oXeC7gWsvTrgh9D5EUhDtfLpA4=
=k82x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fixes and simple cleanups:
- use a proper flexible array instead of a one-element array in order
to avoid array-bounds sanitizer errors
- add NULL pointer checks after allocating memory
- use memdup_array_user() instead of open-coding it
- fix a rare race condition in Xen event channel allocation code
- make struct bus_type instances const
- make kerneldoc inline comments match reality"
* tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: close evtchn after mapping cleanup
xen/gntalloc: Replace UAPI 1-element array
xen: balloon: make balloon_subsys const
xen: pcpu: make xen_pcpu_subsys const
xen/privcmd: Use memdup_array_user() in alloc_ioreq()
x86/xen: Add some null pointer checking to smp.c
xen/xenbus: document will_handle argument for xenbus_watch_path()
In commit 4356e9f841 ("work around gcc bugs with 'asm goto' with
outputs") I did the gcc workaround unconditionally, because the cause of
the bad code generation wasn't entirely clear.
In the meantime, Jakub Jelinek debugged the issue, and has come up with
a fix in gcc [2], which also got backported to the still maintained
branches of gcc-11, gcc-12 and gcc-13.
Note that while the fix technically wasn't in the original gcc-14
branch, Jakub says:
"while it is true that no GCC 14 snapshots until today (or whenever the
fix will be committed) have the fix, for GCC trunk it is up to the
distros to use the latest snapshot if they use it at all and would
allow better testing of the kernel code without the workaround, so
that if there are other issues they won't be discovered years later.
Most userland code doesn't actually use asm goto with outputs..."
so we will consider gcc-14 to be fixed - if somebody is using gcc
snapshots of the gcc-14 before the fix, they should upgrade.
Note that while the bug goes back to gcc-11, in practice other gcc
changes seem to have effectively hidden it since gcc-12.1 as per a
bisect by Jakub. So even a gcc-14 snapshot without the fix likely
doesn't show actual problems.
Also, make the default 'asm_goto_output()' macro mark the asm as
volatile by hand, because of an unrelated gcc issue [1] where it doesn't
match the documented behavior ("asm goto is always volatile").
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103979 [1]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 [2]
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Requested-by: Jakub Jelinek <jakub@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
-----BEGIN PGP SIGNATURE-----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=NqMr
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
of: property: Improve finding the supplier of a remote-endpoint property
of: property: Improve finding the consumer of a remote-endpoint property
net: marvell,prestera: Fix example PCI bus addressing
of: unittest: Fix compile in the non-dynamic case
of: property: fix typo in io-channels
dt-bindings: tpm: Drop type from "resets"
dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
dt-bindings: xilinx: replace Piyush Mehta maintainership
kselftest: dt: Stop relying on dirname to improve performance
dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
A smallish collection of fixes for SPI, all driver specific, plus one
device ID addition for a new Intel part. The ppc4xx isn't routinely
covered by most of the automated testing so there were some errors that
were missed in some of the recent API conversions, otherwise there's
nothing super remarkable here.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXOE6IACgkQJNaLcl1U
h9Bbogf+OxmKFCtZW5QKple5TxYv4FAjdWERMDG1CAWBDU67Unkf7fUopHSPYw5a
P/F6Y8sbSaQpmhdBVL9vjMugrO8hKEpAVN9EWLnhZJ8Z3Zm4XYhRhMizabgPdIeg
kFwONgv+dKkJPu+e5Cecoi2tVq1cy5bht7ob8cQ3PMuCgu7PGl0N8RXjdCVU1AoR
lYWR+W62nkJHQWhZhSRvlpdBok86KLo8cBjCH7mn+ngXSBPjpcchriky7XTvfm85
fl5nHrG+3TNMc/pr2MDY6onjH0zifTdBXnPv0HM77KU/jO45najJ+ZdoCquL9QQT
vgg1bbfBFJilOFKvwmNJSGwZFnBtkQ==
=pkCk
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A smallish collection of fixes for SPI, all driver specific, plus one
device ID addition for a new Intel part.
The ppc4xx isn't routinely covered by most of the automated testing so
there were some errors that were missed in some of the recent API
conversions, otherwise there's nothing super remarkable here"
* tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi-mxs: Fix chipselect glitch
spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
spi: omap2-mcspi: Revert FIFO support without DMA
spi: ppc4xx: Drop write-only variable
spi: ppc4xx: Fix fallout from rename in struct spi_bitbang
spi: ppc4xx: Fix fallout from include cleanup
spi: spi-ppc4xx: include missing platform_device.h
spi: imx: fix the burst length at DMA mode and CPU mode
Guenter runs a lot of KUnit tests so noticed that there were a couple of
the regmap tests, including the newly added noinc test, which could show
spurious failures due to the use of randomly generated test values.
These changes handle the randomly generated data properly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXOEusACgkQJNaLcl1U
h9Bi1gf/bkOzkfE6EcjbKQYaIVFDcd4qNF4smRp+I/Fd+cy5LSnNBcDBBGq+gXac
iajvTCLLeUQo3hG30elrE1bXrpQULoX/UFVlguInf1Ew/soHU8vHnyCMZE897IhY
rDl8wdq+RpqeqedICb36jEMJUu+y4xLqe7WMPbBtgKuSEIrBmGBhvd2/5BgS5aT1
6eB6a2gzAWsmURkfNS8uhnTVZGpIHPbbr/kvOLrDL7AdUHD4jk619b+gDNY3oItT
000LPvFU3h4wpCImLWCVd2hrJzz6cA4ENC9rJZbqznY1it8U8C8nG9I6URBzJzeN
gC3Oxv2nK29VF6BaOaU1J6Sqv/Frew==
=nQst
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap test fixes from Mark Brown:
"Guenter runs a lot of KUnit tests so noticed that there were a couple
of the regmap tests, including the newly added noinc test, which could
show spurious failures due to the use of randomly generated test
values. These changes handle the randomly generated data properly"
* tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Ensure that changed bytes are actually different
regmap: kunit: fix raw noinc write test wrapping
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-06 (igb, igc)
This series contains updates to igb and igc drivers.
Kunwu Chan adjusts firmware version string implementation to resolve
possible NULL pointer issue for igb.
Sasha removes workaround on igc.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
====================
Link: https://lore.kernel.org/r/20240214180347.3219650-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p6)
There are a few network modules left that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/....
This last patchset solves the problem for all the missing driver. It is
not expect to see any warning for the driver/net and net/ directory once
all these patches have landed.
v1: https://lore.kernel.org/all/20240213112122.404045-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240214152741.670178-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the ARC modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-8-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PHY MDIO helpers.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240214152741.670178-7-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PPP modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-6-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the SysKonnect FDDI PCI module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PLIP (parallel port) network module
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
