This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-2-6189311103a9@weissschuh.net
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
The file is called "fw_version" instead of "firmware_version" as
"firmware_version" is already used as custom attribute by single drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-1-6189311103a9@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
28th bit of fixed supply sink PDO represents higher capability.
When this bit is set, the sink device needs more than vsafe5V
(eg: 12 V) to provide full functionality. This patch adds
this higher capability sysfs interface for sink PDO.
28th bit of fixed supply source PDO represents usb_suspend_supported
attribute. This usb_suspend_supported sysfs is already exposed for
source PDOs. This patch adds 'source-capabilities' in
usb_suspend_supported sysfs documentation for additional clarity.
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230214114543.205103-2-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
-----BEGIN PGP SIGNATURE-----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=EWZ7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=B0bJ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.3
This introduces a new driver for the Data Capture and Compare block,
which provides a mechanism for capturing hardware state (access MMIO
registers) either upon request of triggered automatically e.g. upon a
watchdog bite, for post mortem analysis.
The remote filesystem memory share driver gains support for having its
memory bound to more than a single VMID.
The SCM driver gains the minimal support needed to support a new
mechanism where secure world can put calls on hold and later request
them to be retried.
Support for the new SA8775P platform is added to rpmhpd, QDU1000 is
added to the SCM driver and a long list of platforms are added to the
socinfo driver. Support for socinfo data revision 16 is also introduced.
Lastly a driver to program the ramp controller in MSM8976 is introduced.
* tag 'qcom-drivers-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Add wait-queue handling logic
dt-bindings: firmware: qcom,scm: Add optional interrupt
Revert "dt-bindings: power: rpmpd: Add SM4250 support"
Revert "soc: qcom: rpmpd: Add SM4250 support"
soc: qcom: socinfo: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add a bunch of older SoCs
dt-bindings: arm: qcom,ids: Add QRD board ID
soc: qcom: socinfo: Fix soc_id order
dt-bindings: soc: qcom: smd-rpm: Exclude MSM8936 from glink-channels
dt-bindings: firmware: qcom: scm: Separate VMIDs from header to bindings
soc: qcom: rmtfs: Optionally map RMTFS to more VMs
dt-bindings: reserved-memory: rmtfs: Make qcom,vmid an array
dt-bindings: firmware: scm: Add QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: narrow clocks and interconnects
dt-bindings: firmware: qcom,scm: document MSM8226 clocks
soc: qcom: ramp_controller: Make things static
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: power: qcom,rpmpd: document sa8775p
PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
soc: qcom: dcc: rewrite description of dcc sysfs files
...
Link: https://lore.kernel.org/r/20230126163008.3676950-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pseries platform can support dynamic secure boot (i.e. secure boot
using user-defined keys) using variables contained with the PowerVM LPAR
Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the
relevant variables for pseries dynamic secure boot through the existing
secvar filesystem layout.
The relevant variables for dynamic secure boot are signed in the
keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall.
Object labels in the keystore are encoded using ucs2 format. With our
fixed variable names we don't have to care about encoding outside of the
necessary byte padding.
When a user writes to a variable, the first 8 bytes of data must contain
the signed update flags as defined by the hypervisor.
When a user reads a variable, the first 4 bytes of data contain the
policies defined for the object.
Limitations exist due to the underlying implementation of sysfs binary
attributes, as is the case for the OPAL secvar implementation -
partial writes are unsupported and writes cannot be larger than PAGE_SIZE.
(Even when using bin_attributes, which can be larger than a single page,
sysfs only gives us one page's worth of write buffer at a time, and the
hypervisor does not expose an interface for partial writes.)
Co-developed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NLS dependency to fix build errors, squash fix from ajd]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com
Add description for new attributes added for rack manager switch and
NG800 family systems.
Attributes related to power converter board:
- reset_pwr_converter_fail;
- pwr_converter_prog_en;
Attributes related to External Root of Trust (EROT) devices recovery:
- erot1_ap_reset;
- erot2_ap_reset;
- erot1_recovery;
- erot2_recovery;
- erot1_reset;
- erot2_reset;
- erot1_wp;
- erot2_wp;
- spi_chnl_select;
Attributes related to clock board failures and recovery:
- clk_brd1_boot_fail;
- clk_brd2_boot_fail;
- clk_brd_fail;
- clk_brd_prog_en;
Attributes related to power failures:
- reset_ac_ok_fail;
- asic_pg_fail;
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-14-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
/proc/xen is a legacy pseudo filesystem which predates Xen support
getting merged into Linux. It has largely been replaced with more
normal locations for data (/sys/hypervisor/ for info, /dev/xen/ for
user devices). We want to compile xenfs support out of the dom0 kernel.
There is one item which only exists in /proc/xen, namely
/proc/xen/capabilities with "control_d" being the signal of "you're in
the control domain". This ultimately comes from the SIF flags provided
at VM start.
This patch exposes all SIF flags in /sys/hypervisor/start_flags/ as
boolean files, one for each bit, returning '1' if set, '0' otherwise.
Two known flags, 'privileged' and 'initdomain', are explicitly named,
and all remaining flags can be accessed via generically named files,
as suggested by Andrew Cooper.
Signed-off-by: Per Bilse <per.bilse@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230103130213.2129753-1-per.bilse@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Include the support for enumerating and provisioning ram regions for
v6.3. This also include a default policy change for ram / volatile
device-dax instances to assign them to the dax_kmem driver by default.
Expand the region creation infrastructure to enable 'ram'
(volatile-memory) regions. The internals of create_pmem_region_store()
and create_pmem_region_show() are factored out into helpers
__create_region() and __create_region_show() for the 'ram' case to
reuse.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601995775.1924368.352616146815830591.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Shipping versions of the cxl-cli utility expect all regions to have a
'uuid' attribute. In preparation for 'ram' regions, update the 'uuid'
attribute to return an empty string which satisfies the current
expectations of 'cxl list -R'. Otherwise, 'cxl list -R' fails in the
presence of regions with the 'uuid' attribute missing. Force the
attribute to be read-only as there is no facility or expectation for a
'ram' region to recall its uuid from one boot to the next.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167601994558.1924368.12612811533724694444.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for a new region type, "ram" regions, add a mode
attribute to clarify the mode of the decoders that can be added to a
region. Share the internals of mode_show() (for decoders) with the
region case.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601993930.1924368.4305018565539515665.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prior to Linus deciding that the kernel that following v5.19 would be
v6.0, the CXL ABI documentation already referenced v5.20. In preparation
for updating these entries update the kernel version to v6.0.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601993360.1924368.14122892663883462813.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Change kernel version from 5.20 to 6.0, as 5.20 is not a release.
Signed-off-by: Meadhbh Fitzpatrick <meadhbh.fitzpatrick@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge the general CXL updates with fixes targeting v6.2-rc for v6.3.
Resolve a conflict with the fix and move of cxl_report_and_clear() from
pci.c to core/pci.c.
IPU policy can be disabled, let's add description for it and other policy.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The UVC gadget at present has no support for extension units. Add the
infrastructure to uvc_configfs.c that allows users to create XUs via
configfs. These will be stored in a new child of uvcg_control_grp_type
with the name "extensions".
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-4-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment, the UVC function graph is hardcoded IT -> PU -> OT.
To add XU support we need the ability to insert the XU descriptors
into the chain. To facilitate that, make the output terminal's
bSourceID attribute writeable so that we can configure its source.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206161802.892954-2-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The documentation table added in a36afe7804 ("usb: gadget: uvc: Add
new enable_interrupt_ep attribute") was incorrect, resulting in a new
warning when compiling the documentation.
Correct the formatting to resolve the warning.
Fixes: a36afe7804 ("usb: gadget: uvc: Add new enable_interrupt_ep attribute")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206151131.863960-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow users to create new color matching descriptors in addition to
the default one. These must be associated with a UVC format in order
to be transmitted to the host, which is achieved by symlinking from
the format to the newly created color matching descriptor - extend
the uncompressed and mjpeg formats to support that linking operation.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-7-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for allowing more than the default color matching
descriptor, make the color matching attributes writeable.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230202114142.300858-6-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the settings exported by rt9467 charger driver through sysfs
entries:
- sysoff_enable
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
[update kernel version and date]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Document the settings exported by rt9471 charger driver through sysfs entries:
- sysoff_enable
- port_detect_enable
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
[update kernel version and date]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The perf subsystem assumes that all counters are by default per-CPU. So
the user space tool reads a counter from each CPU. However, the IOMMU
counters are system-wide and can be read from any CPU. Here we use a CPU
mask to restrict counting to one CPU to handle the issue. (with CPU
hotplug notifier to choose a different CPU if the chosen one is taken
off-line).
The CPU is exposed to /sys/bus/event_source/devices/dmar*/cpumask for
the user space perf tool.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-6-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement the IOMMU performance monitor capability, which supports the
collection of information about key events occurring during operation of
the remapping hardware, to aid performance tuning and debug.
The IOMMU perfmon support is implemented as part of the IOMMU driver and
interfaces with the Linux perf subsystem.
The IOMMU PMU has the following unique features compared with the other
PMUs.
- Support counting. Not support sampling.
- Does not support per-thread counting. The scope is system-wide.
- Support per-counter capability register. The event constraints can be
enumerated.
- The available event and event group can also be enumerated.
- Extra Enhanced Commands are introduced to control the counters.
Add a new variable, struct iommu_pmu *pmu, to in the struct intel_iommu
to track the PMU related information.
Add iommu_pmu_register() and iommu_pmu_unregister() to register and
unregister a IOMMU PMU. The register function setup the IOMMU PMU ops
and invoke the standard perf_pmu_register() interface to register a PMU
in the perf subsystem. This patch only exposes the functions. The
following patch will enable them in the IOMMU driver.
The IOMMU PMUs can be found under /sys/bus/event_source/devices/dmar*
The available filters and event format can be found at the format folder
$ ls /sys/bus/event_source/devices/dmar1/format/
event event_group filter_ats filter_ats_en filter_page_table
filter_page_table_en
The supported events can be found at the events folder
$ ls /sys/bus/event_source/devices/dmar1/events/
ats_blocked fs_nonleaf_hit int_cache_hit_posted
iommu_mem_blocked iotlb_hit pasid_cache_lookup ss_nonleaf_hit
ctxt_cache_hit fs_nonleaf_lookup int_cache_lookup
iommu_mrds iotlb_lookup pg_req_posted ss_nonleaf_lookup
ctxt_cache_lookup int_cache_hit_nonposted iommu_clocks
iommu_requests pasid_cache_hit pw_occupancy
The command below illustrates filter usage with a simple example.
$ perf stat -e dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
-a sleep 1
Performance counter stats for 'system wide':
368,947 dmar1/iommu_requests,filter_ats_en=0x1,filter_ats=0x1/
1.002592074 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-5-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add documentation for memory_failure's per NUMA node sysfs entries
Link: https://lkml.kernel.org/r/20230120034622.2698268-4-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch exports the CAN channel ID as a sysfs attribute. The CAN
channel ID is a user-configurable u8/u32 identifier that can be set
individually for each CAN interface of a PEAK USB device.
Exporting the channel ID as a sysfs attribute allows users to easily read
the ID and to write udev rules that can match against the ID. This is
especially useful for PEAK USB devices that do not export a serial
number at SUB level.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Lukas Magel <lukas.magel@posteo.net>
Link: https://lore.kernel.org/all/20230116200932.157769-7-lukas.magel@posteo.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=FS9z
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for v6.3
- Dynamic TraceID allocation scheme for CoreSight trace source. Allows systems
with > 44 CPUs to use the ETMs. TraceID is advertised via AUX_OUTPUT_HWID
packets in perf.data. Also allows allocating trace-ids for non-CPU bound trace
components (e.g., Qualcomm TPDA).
- Support for Qualcomm TPDA and TPDM CoreSight devices.
- Support for Ultrasoc SMB CoreSight Sink buffer.
- Fixes for HiSilicon PTT driver
- MAINTAINERS update: Add Reviewer for HiSilicon PTT driver
- Bug fixes for CTI power management and sysfs mode
- Fix CoreSight ETM4x TRCSEQRSTEVRn access
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (35 commits)
coresight: tmc: Don't enable TMC when it's not ready.
coresight: tpda: fix return value check in tpda_probe()
Coresight: tpda/tpdm: remove incorrect __exit annotation
coresight: perf: Output trace id only once
coresight: Fix uninitialised variable use in coresight_disable
Documentation: coresight: tpdm: Add dummy comment after sysfs list
Documentation: coresight: Extend title heading syntax in TPDM and TPDA documentation
Documentation: trace: Add documentation for TPDM and TPDA
dt-bindings: arm: Adds CoreSight TPDA hardware definitions
Coresight: Add TPDA link driver
coresight-tpdm: Add integration test support
coresight-tpdm: Add DSB dataset support
dt-bindings: arm: Add CoreSight TPDM hardware
Coresight: Add coresight TPDM source driver
coresight: core: Use IDR for non-cpu bound sources' paths.
coresight: trace-id: Add debug & test macros to Trace ID allocation
coresight: events: PERF_RECORD_AUX_OUTPUT_HW_ID used for Trace ID
kernel: events: Export perf_report_aux_output_id()
coresight: trace id: Remove legacy get trace ID function.
coresight: etmX.X: stm: Remove trace_id() callback
...
Add a new attribute to the default control config group that allows
users to specify whether they want to enable the optional interrupt
endpoint for the VideoControl interface.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230130105045.120886-3-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 98de59bfe4 ("take calculation of final prot in
security_mmap_file() into a helper") caused ima_file_mmap() to receive the
protections requested by the application and not those applied by the
kernel.
After restoring the original MMAP_CHECK behavior, existing attestation
servers might be broken due to not being ready to handle new entries
(previously missing) in the IMA measurement list.
Restore the original correct MMAP_CHECK behavior, instead of keeping the
current buggy one and introducing a new hook with the correct behavior.
Otherwise, there would have been the risk of IMA users not noticing the
problem at all, as they would actively have to update the IMA policy, to
switch to the correct behavior.
Also, introduce the new MMAP_CHECK_REQPROT hook to keep the current
behavior, so that IMA users could easily fix a broken attestation server,
although this approach is discouraged due to potentially missing
measurements.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge v6.2-rc6 into drm-next
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current discard_io_aware_gran is a fixed value, change it to be
configurable through the sys node.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The user can set the max_sectors limit to any valid value via sysfs
/sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits
are ever rescanned, though, the limit reverts back to the potentially
artificially low BLK_DEF_MAX_SECTORS value.
Preserve the user's setting as the max_sectors limit as long as it's
valid. The user can reset back to defaults by writing 0 to the sysfs
file.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Microchip:
- Ivan's reliability improvements for Microchip Polarfire FPGA
FPGA DFL doc:
- Randy and Yilun's kernel doc fixes.
The 2 patches, "fpga: dfl: more kernel-doc corrections" &
"fpga: dfl: kernel-doc corrections" conflicts with Matthew's FPGA
patch "fpga: dfl: add basic support for DFHv1" on tty-next. Yilun
resolved the conflicts on:
--branch for-next https://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga.git/
On that branch, Matthew's patch is applied first then kernel doc fixes
follow.
Intel m10 bmc MFD & sub devices:
- Lee's topic branch merged, to support new BMC board type with new
PMCI interface to host, as well as its new sub devices.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCY9Y+3RMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaJz8A/2p3Gkdl8C85D+158lgLR8nGnCHQpBGW
d8aaYSyMMeUCAQCa9srNzXijIZExWf7IjIYmeDFF0FO6v/8qrMtJZ/NIBg==
=Cv0r
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.3-rc1
Microchip:
- Ivan's reliability improvements for Microchip Polarfire FPGA
FPGA DFL doc:
- Randy and Yilun's kernel doc fixes.
The 2 patches, "fpga: dfl: more kernel-doc corrections" &
"fpga: dfl: kernel-doc corrections" conflicts with Matthew's FPGA
patch "fpga: dfl: add basic support for DFHv1" on tty-next. Yilun
resolved the conflicts on:
--branch for-next https://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga.git/
On that branch, Matthew's patch is applied first then kernel doc fixes
follow.
Intel m10 bmc MFD & sub devices:
- Lee's topic branch merged, to support new BMC board type with new
PMCI interface to host, as well as its new sub devices.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: bridge: return errors in the show() method of the "state" attribute
fpga: dfl: more kernel-doc corrections
fpga: dfl: kernel-doc corrections
fpga: microchip-spi: separate data frame write routine
fpga: microchip-spi: rewrite status polling in a time measurable way
fpga: microchip-spi: move SPI I/O buffers out of stack
mfd: intel-m10-bmc: Add PMCI driver
fpga: m10bmc-sec: Make rsu status type specific
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Support multiple CSR register layouts
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Add missing includes to header
Add the mfd driver for the Platform Management Component Interface
(PMCI) based interface of Intel MAX10 BMC controller.
PMCI is a software-visible interface, connected to card BMC which
provided the basic functionality of read/write BMC register. The access
to the register is done indirectly via a hardware controller/bridge
that handles read/write/clear commands and acknowledgments for the
commands.
Previously, intel-m10-bmc provided sysfs under
/sys/bus/spi/devices/... which is generalized in this change because
not all MAX10 BMC appear under SPI anymore.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-11-ilpo.jarvinen@linux.intel.com
Stephen Rothwell reported htmldocs warnings when merging accel tree:
Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix these by fixing alignment of list of card status returned by
/sys/class/habanalabs/hl<n>/status.
Link: https://lore.kernel.org/linux-next/20230120130634.61c3e857@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As device status was changed recently, we must update the
documentation as well.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Similar to the justification in:
1b58b4cac6 ("cxl/port: Record parent dport when adding ports")
...userspace wants to know the routing information for ports for
calculating the memdev order for region creation among other things.
Cache the information the kernel discovers at enumeration time in a
'parent_dport' attribute to save userspace the time of trawling sysfs
to recover the same information.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167124082375.1626103.6047000000121298560.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The main addition is a unified userspace interface for SCMI irrespective
of the underlying transport and along with some changed to refactor the
SCMI stack probing sequence.
1. SCMI unified userspace interface
This is to have a unified way of testing an SCMI platform firmware
implementation for compliance, fuzzing etc., from the perspective of
the non-secure OSPM irrespective of the underlying transport supporting
SCMI. It is just for testing/development and not a feature intended fo
use in production.
Currently an SCMI Compliance Suite[1] can only work by injecting SCMI
messages using the mailbox test driver only which makes it transport
specific and can't be used with any other transport like virtio,
smc/hvc, optee, etc. Also the shared memory can be transport specific
and it is better to even abstract/hide those details while providing
the userspace access. So in order to scale with any transport, we need
a unified interface for the same.
In order to achieve that, SCMI "raw mode support" is being added through
debugfs which is more configurable as well. A userspace application
can inject bare SCMI binary messages into the SCMI core stack; such
messages will be routed by the SCMI regular kernel stack to the backend
platform firmware using the configured transport transparently. This
eliminates the to know about the specific underlying transport
internals that will be taken care of by the SCMI core stack itself.
Further no additional changes needed in the device tree like in the
mailbox-test driver.
[1] https://gitlab.arm.com/tests/scmi-tests
2. Refactoring of the SCMI stack probing sequence
On some platforms, SCMI transport can be provide by OPTEE/TEE which
introduces certain dependency in the probe ordering. In order to address
the same, the SCMI bus is split into its own module which continues to
be initialized at subsys_initcall, while the SCMI core stack, including
its various transport backends (like optee, mailbox, virtio, smc), is
now moved into a separate module at module_init level.
This allows the other possibly dependent subsystems to register and/or
access SCMI bus well before the core SCMI stack and its dependent
transport backends.
-----BEGIN PGP SIGNATURE-----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=yLSu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jvm3
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.3
The main addition is a unified userspace interface for SCMI irrespective
of the underlying transport and along with some changed to refactor the
SCMI stack probing sequence.
1. SCMI unified userspace interface
This is to have a unified way of testing an SCMI platform firmware
implementation for compliance, fuzzing etc., from the perspective of
the non-secure OSPM irrespective of the underlying transport supporting
SCMI. It is just for testing/development and not a feature intended fo
use in production.
Currently an SCMI Compliance Suite[1] can only work by injecting SCMI
messages using the mailbox test driver only which makes it transport
specific and can't be used with any other transport like virtio,
smc/hvc, optee, etc. Also the shared memory can be transport specific
and it is better to even abstract/hide those details while providing
the userspace access. So in order to scale with any transport, we need
a unified interface for the same.
In order to achieve that, SCMI "raw mode support" is being added through
debugfs which is more configurable as well. A userspace application
can inject bare SCMI binary messages into the SCMI core stack; such
messages will be routed by the SCMI regular kernel stack to the backend
platform firmware using the configured transport transparently. This
eliminates the to know about the specific underlying transport
internals that will be taken care of by the SCMI core stack itself.
Further no additional changes needed in the device tree like in the
mailbox-test driver.
[1] https://gitlab.arm.com/tests/scmi-tests
2. Refactoring of the SCMI stack probing sequence
On some platforms, SCMI transport can be provide by OPTEE/TEE which
introduces certain dependency in the probe ordering. In order to address
the same, the SCMI bus is split into its own module which continues to
be initialized at subsys_initcall, while the SCMI core stack, including
its various transport backends (like optee, mailbox, virtio, smc), is
now moved into a separate module at module_init level.
This allows the other possibly dependent subsystems to register and/or
access SCMI bus well before the core SCMI stack and its dependent
transport backends.
* tag 'scmi-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
firmware: arm_scmi: Clarify raw per-channel ABI documentation
firmware: arm_scmi: Add per-channel raw injection support
firmware: arm_scmi: Add the raw mode co-existence support
firmware: arm_scmi: Call raw mode hooks from the core stack
firmware: arm_scmi: Reject SCMI drivers when configured in raw mode
firmware: arm_scmi: Add debugfs ABI documentation for raw mode
firmware: arm_scmi: Add core raw transmission support
firmware: arm_scmi: Add debugfs ABI documentation for common entries
firmware: arm_scmi: Populate a common SCMI debugfs root
debugfs: Export debugfs_create_str symbol
include: trace: Add platform and channel instance references
firmware: arm_scmi: Add internal platform/channel identifiers
firmware: arm_scmi: Move errors defs and code to common.h
firmware: arm_scmi: Add xfer helpers to provide raw access
firmware: arm_scmi: Add flags field to xfer
firmware: arm_scmi: Refactor scmi_wait_for_message_response
firmware: arm_scmi: Refactor polling helpers
firmware: arm_scmi: Refactor xfer in-flight registration routines
firmware: arm_scmi: Split bus and driver into distinct modules
firmware: arm_scmi: Introduce a new lifecycle for protocol devices
...
Link: https://lore.kernel.org/r/20230120162152.1438456-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Explain more in detail how the per-channel <m> identifier is chosen.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230120122326.1932614-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Triple Modular Redundancy(TMR) subsystem contains three microblaze cores,
subsystem is fault-tolerant and continues to operate nominally after
encountering an error. Together with the capability to detect and recover
from errors, the implementation ensures the reliability of the entire
subsystem. TMR Manager is responsible for performing recovery of the
subsystem detects the fault via a break signal it invokes microblaze
software break handler which calls the tmr manager driver api to
update the error count and status, added support for fault detection
feature via sysfs interface.
Usage:
To know the break handler count(Error count):
cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
Link: https://lore.kernel.org/r/20221125054113.122833-3-appana.durga.kedareswara.rao@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On a system configured with multiple transport channels, expose a few
additional debugfs per-channel entries to allow a user to explicitly select
which transport channel to use for the SCMI message injection.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-18-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Integration test for tpdm can help to generate the data for
verification of the topology during TPDM software bring up.
Sample:
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
cat /dev/tmc_etf0 > /data/etf-tpdm0.bin
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-6-quic_jinlmao@quicinc.com
Update documentation describing sysfs node that could help to
configure hardware error threshold for users in the user space. And
describing sysfs node that could read the device isolated state.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Link: https://lore.kernel.org/r/20221119074817.12063-3-yekai13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a custom (non-USB IF) extension to the USB standard:
https://wicg.github.io/webusb/
This specification is published under the W3C Community Contributor
Agreement, which in particular allows to implement the specification
without any royalties.
The specification allows USB gadgets to announce an URL to landing
page and describes a Javascript interface for websites to interact
with the USB gadget, if the user allows it. It is currently
supported by Chromium-based browsers, such as Chrome, Edge and
Opera on all major operating systems including Linux.
This patch adds optional support for Linux-based USB gadgets
wishing to expose such a landing page.
During device enumeration, a host recognizes that the announced
USB version is at least 2.01, which means, that there are BOS
descriptors available. The device than announces WebUSB support
using a platform device capability. This includes a vendor code
under which the landing page URL can be retrieved using a
vendor-specific request.
Previously, the BOS descriptors would unconditionally include an
LPM related descriptor, as BOS descriptors were only ever sent
when the device was LPM capable. As this is no longer the case,
this patch puts this descriptor behind a lpm_capable condition.
Usage is modeled after os_desc descriptors:
echo 1 > webusb/use
echo "https://www.kernel.org" > webusb/landingPage
lsusb will report the device with the following lines:
Platform Device Capability:
bLength 24
bDescriptorType 16
bDevCapabilityType 5
bReserved 0
PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665}
WebUSB:
bcdVersion 1.00
bVendorCode 0
iLandingPage 1 https://www.kernel.org
Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com>
Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the TraceID API to allocate ETM trace IDs dynamically.
As with the etm4x we allocate on enable / disable for perf,
allocate on enable / reset for sysfs.
Additionally we allocate on sysfs file read as both perf and sysfs
can read the ID before enabling the hardware.
Remove sysfs option to write trace ID - which is inconsistent with
both the dynamic allocation method and the fixed allocation method
previously used.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-7-mike.leach@linaro.org
Document newly added DAMON sysfs interface files for DAMOS filtering on
the DAMON ABI document.
Link: https://lkml.kernel.org/r/20221205230830.144349-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bring in documentation for UltraSoc SMB driver.
It simply describes the device, sysfs interface and the
firmware bindings.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114101302.62320-3-hejunhao3@huawei.com
Remove Cornelia's email address from the file as suggested by her. List
linux-s390 mailing-list address as the primary contact instead.
Link: https://lore.kernel.org/linux-s390/8735d0oiq6.fsf@redhat.com/
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The description of dcc sysfs files is somewhat confusing and not effective.
Rewrite it to be clear.
While at it, also use literal code block for config sysfs examples and
remove redundant examples that are obvious.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230135030.17002-3-bagasdotme@gmail.com
kernel test robot reported htmldocs warnings:
Documentation/ABI/testing/debugfs-driver-dcc:34: WARNING: Unexpected indentation.
Documentation/ABI/testing/debugfs-driver-dcc:34: WARNING: Block quote ends without a blank line; unexpected unindent.
Fix these by fixing numbered list syntax on description of
/sys/kernel/debug/dcc/.../[list-number]/config, including adding blank line
separators as appropriate.
Link: https://lore.kernel.org/linux-doc/202212300426.eMLsZsvA-lkp@intel.com/
Fixes: 4cbe60cf5a ("soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230135030.17002-2-bagasdotme@gmail.com
-----BEGIN PGP SIGNATURE-----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=LJ5Q
-----END PGP SIGNATURE-----
Merge tag 'block-2023-01-06' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
Exporsing HotPlugDetect(HPD) helps userspace to infer HPD
state as defined by VESA DisplayPort Alt Mode on USB Type-C Standard.
This allows userspace to notify users for self help, for instance,
to hint user that the display port cable is probably detached (or)
the display port sink (viz., monitors ect.,) is un-powered.
Also helps to debug issues reported from field.
This change adds an additional attribute "hpd" to the existing
"displayport" attributes.
VESA DisplayPort Alt Mode on USB Type-C Standard defines how
HotPlugDetect(HPD) shall be supported on the USB-C connector
when operating in DisplayPort Alt Mode. This is a read only
node which reflects the current state of HPD.
Valid values:
- 1 when HPD’s logical state is high (HPD_High)
- 0 when HPD’s logical state is low (HPD_Low)
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221211193755.1392128-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit f40eb99897.
There are apparently still users out there of this driver. While we'd
love to remove it to ease the maintenance burden, let's reinstate it
for now until better (userspace) solutions can be developed.
Link: https://lore.kernel.org/lkml/20230104190115.ceglfefco475ev6c@pali/
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The DCC is a DMA Engine designed to capture and store data
during system crash or software triggers. The DCC operates
based on user inputs via the debugfs interface. The user gives
addresses as inputs and these addresses are stored in the
dcc sram. In case of a system crash or a manual software
trigger by the user through the debugfs interface,
the dcc captures and stores the values at these addresses.
This patch contains the driver which has all the methods
pertaining to the debugfs interface, auxiliary functions to
support all the four fundamental operations of dcc namely
read, write, read/modify/write and loop. The probe method
here instantiates all the resources necessary for dcc to
operate mainly the dedicated dcc sram where it stores the
values. The DCC driver can be used for debugging purposes
without going for a reboot since it can perform software
triggers as well based on user inputs.
Also add the documentation for debugfs entries which explains
the functionalities of each debugfs file that has been created
for dcc.
The following is the justification of using debugfs interface
over the other alternatives like sysfs/ioctls
i) As can be seen from the debugfs attribute descriptions,
some of the debugfs attribute files here contains multiple
arguments which needs to be accepted from the user. This goes
against the design style of sysfs.
ii) The user input patterns have been made simple and convenient
in this case with the use of debugfs interface as user doesn't
need to shuffle between different files to execute one instruction
as was the case on using other alternatives.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
[bjorn: Fixed up a few indents and line wraps]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/644b4f66a358492a8a6738454035c3b120092fe7.1672148732.git.quic_schowdhu@quicinc.com
New support:
- Qualcomm SDM670, SM6115 and SM6375 GPI controller support
- Ingenic JZ4755 dmaengine support
- Removal of iop-adma driver
Updates:
- Tegra support for dma-channel-mask
- at_hdmac cleanup and virt-chan support for this driver
-----BEGIN PGP SIGNATURE-----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=pURR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Qualcomm SDM670, SM6115 and SM6375 GPI controller support
- Ingenic JZ4755 dmaengine support
- Removal of iop-adma driver
Updates:
- Tegra support for dma-channel-mask
- at_hdmac cleanup and virt-chan support for this driver"
* tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits)
dmaengine: Revert "dmaengine: remove s3c24xx driver"
dmaengine: tegra: Add support for dma-channel-mask
dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
dmaengine: idxd: Remove linux/msi.h include
dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375
dmaengine: idxd: Fix crc_val field for completion record
dmaengine: at_hdmac: Convert driver to use virt-dma
dmaengine: at_hdmac: Remove unused member of at_dma_chan
dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"
dmaengine: at_hdmac: Rename "dma_common" to "dma_device"
dmaengine: at_hdmac: Use bitfield access macros
dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c
dmaengine: at_hdmac: Set include entries in alphabetic order
dmaengine: at_hdmac: Use pm_ptr()
dmaengine: at_hdmac: Use devm_clk_get()
dmaengine: at_hdmac: Use devm_platform_ioremap_resource
dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()
dmaengine: at_hdmac: Introduce atc_get_llis_residue()
dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue
dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts
...
Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new
driver development and minor fixes. Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu systems.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wrdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykSDgCdHjUHS62/UnKdB9rLtyAOFxS/6DgAn2X4Unf8
RN8Mn2mUIiBzyu5p+Zc7
=tK3S
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1.
Overall, thanks to the removal of a driver, more lines were removed than
added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many USB
and other subsystem drivers, that ended up breaking the build. That
will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wvYg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl5DACgssl/ag4zDePHpfoiG5zEGEzH8XsAoMFrzvzu
d43hsH3qsfDGSZRkJJMu
=ORDd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the large set of USB and Thunderbolt driver changes for
6.2-rc1. Overall, thanks to the removal of a driver, more lines were
removed than added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many
USB and other subsystem drivers, that ended up breaking the build.
That will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits)
usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
usb: dwc2: power on/off phy for peripheral mode in dual-role mode
usb: dwc2: disable lpm feature on Rockchip SoCs
dt-bindings: usb: mtk-xhci: add support for mt7986
usb: dwc3: core: defer probe on ulpi_read_id timeout
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
dt-bindings: vendor-prefixes: add Genesys Logic
usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
usb: typec: tipd: Set mode of operation for USB Type-C connector
usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
usb: musb: remove extra check in musb_gadget_vbus_draw
usb: gadget: uvc: Prevent buffer overflow in setup handler
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
usb: storage: Add check for kcalloc
USB: sisusbvga: use module_usb_driver()
USB: sisusbvga: rename sisusb.c to sisusbvga.c
USB: sisusbvga: remove console support
...
In this round, we've added two features: 1) F2FS_IOC_START_ATOMIC_REPLACE and
2) per-block age-based extent cache. 1) is a variant of the previous atomic
write feature which guarantees a per-file atomicity. It would be more efficient
than AtomicFile implementation in Android framework. 2) implements another type
of extent cache in memory which keeps the per-block age in a file, so that block
allocator could split the hot and cold data blocks more accurately.
Enhancement:
- introduce F2FS_IOC_START_ATOMIC_REPLACE
- refactor extent_cache to add a new per-block-age-based extent cache support
- introduce discard_urgent_util, gc_mode, max_ordered_discard sysfs knobs
- add proc entry to show discard_plist info
- optimize iteration over sparse directories
- add barrier mount option
Bug fix
- avoid victim selection from previous victim section
- fix to enable compress for newly created file if extension matches
- set zstd compress level correctly
- initialize locks early in f2fs_fill_super() to fix bugs reported by syzbot
- correct i_size change for atomic writes
- allow to read node block after shutdown
- allow to set compression for inlined file
- fix gc mode when gc_urgent_high_remaining is 1
- should put a page when checking the summary info
Minor fixes and various clean-ups in GC, discard, debugfs, sysfs, and doc.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAmOaTNUACgkQQBSofoJI
UNIQnw//V7Q8DUHw5YNj04jutwXH2DNMLAmn/NJh5S6dIzy/LiywlSzVg53/0/FP
4K577urUkIhgilRO+yncUMSnSQk7BluQvGSx4ja2AV+dpDomjxM3GwIacGzSvr7D
VfVf8Vig10UEFrrtEEKtv1VFlYHAmo8lLpubzrZHV8aZFLHHYO2fakQhPu8BYsaz
eGCJwxjvTZcQUPkaeG9tWto3ChI3F6PzreiQ5TztHhLWSEgw/o0qijpsc+2SthaV
my7uGjeBY8EGPeSYbeCxRtdx8g8Qu11K3ISuDj8zBybmjG3IWOGt1CVcrY6tZbal
aL70CMtHkMqMn03VqbpCTqBtdWNMrrw5sYSL3qXIUdXlX/2yJBh9fLAeNxKNs5Nu
6veSb2WgYMHqIsClkAAcP0xJ8g6kodGoG60wVr4ek0Vdt4osaQqwq+bnffpwwxtQ
F+7aRuinv+rdrHJ4CuFXAmHPKh2lBe2lTTWZEKg2RptTxZ5DhD2Qn6x1khPD2GFA
mG2Aeiq6PVxxEeIO+w/VBCuAgpGTFV2N/ZIF8VfjFNdWiN5OGLWQNHC2KGj2G2uV
+fA+B91txQWtjY9h72YJb2+aGIixcnLY24ni4mDgDItqtpCB4PW56W8cbnbv9Pl+
aXAWdADqJdDyllHoVB/JQ24gr2fATJGRIDeYDnw+vPP4f5ZT5vg=
=f00t
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added two features: F2FS_IOC_START_ATOMIC_REPLACE
and a per-block age-based extent cache.
F2FS_IOC_START_ATOMIC_REPLACE is a variant of the previous atomic
write feature which guarantees a per-file atomicity. It would be more
efficient than AtomicFile implementation in Android framework.
The per-block age-based extent cache implements another type of extent
cache in memory which keeps the per-block age in a file, so that block
allocator could split the hot and cold data blocks more accurately.
Enhancements:
- introduce F2FS_IOC_START_ATOMIC_REPLACE
- refactor extent_cache to add a new per-block-age-based extent cache support
- introduce discard_urgent_util, gc_mode, max_ordered_discard sysfs knobs
- add proc entry to show discard_plist info
- optimize iteration over sparse directories
- add barrier mount option
Bug fixes:
- avoid victim selection from previous victim section
- fix to enable compress for newly created file if extension matches
- set zstd compress level correctly
- initialize locks early in f2fs_fill_super() to fix bugs reported by syzbot
- correct i_size change for atomic writes
- allow to read node block after shutdown
- allow to set compression for inlined file
- fix gc mode when gc_urgent_high_remaining is 1
- should put a page when checking the summary info
Minor fixes and various clean-ups in GC, discard, debugfs, sysfs, and
doc"
* tag 'f2fs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits)
f2fs: reset wait_ms to default if any of the victims have been selected
f2fs: fix some format WARNING in debug.c and sysfs.c
f2fs: don't call f2fs_issue_discard_timeout() when discard_cmd_cnt is 0 in f2fs_put_super()
f2fs: fix iostat parameter for discard
f2fs: Fix spelling mistake in label: free_bio_enrty_cache -> free_bio_entry_cache
f2fs: add block_age-based extent cache
f2fs: allocate the extent_cache by default
f2fs: refactor extent_cache to support for read and more
f2fs: remove unnecessary __init_extent_tree
f2fs: move internal functions into extent_cache.c
f2fs: specify extent cache for read explicitly
f2fs: introduce f2fs_is_readonly() for readability
f2fs: remove F2FS_SET_FEATURE() and F2FS_CLEAR_FEATURE() macro
f2fs: do some cleanup for f2fs module init
MAINTAINERS: Add f2fs bug tracker link
f2fs: remove the unused flush argument to change_curseg
f2fs: open code allocate_segment_by_default
f2fs: remove struct segment_allocation default_salloc_ops
f2fs: introduce discard_urgent_util sysfs node
f2fs: define MIN_DISCARD_GRANULARITY macro
...
Running "make htmldocs" shows that "/sys/kernel/oops_count" was
duplicated. This should have been "warn_count":
Warning: /sys/kernel/oops_count is defined 2 times:
./Documentation/ABI/testing/sysfs-kernel-warn_count:0
./Documentation/ABI/testing/sysfs-kernel-oops_count:0
Fix the typo.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-doc/202212110529.A3Qav8aR-lkp@intel.com
Fixes: 8b05aa2633 ("panic: Expose "warn_count" to sysfs")
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
- Convert flexible array members, fix -Wstringop-overflow warnings,
and fix KCFI function type mismatches that went ignored by
maintainers (Gustavo A. R. Silva, Nathan Chancellor, Kees Cook).
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(),
add more __alloc_size attributes, and introduce full testing
of all allocator functions. Finally remove the ksize() side-effect
so that each allocation-aware checker can finally behave without
exceptions.
- Introduce oops_limit (default 10,000) and warn_limit (default off)
to provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook).
- Introduce overflows_type() and castable_to_type() helpers for
cleaner overflow checking.
- Improve code generation for strscpy() and update str*() kern-doc.
- Convert strscpy and sigphash tests to KUnit, and expand memcpy
tests.
- Always use a non-NULL argument for prepare_kernel_cred().
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell).
- Adjust orphan linker section checking to respect CONFIG_WERROR
(Xin Li).
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu).
- Fix um vs FORTIFY warnings for always-NULL arguments.
-----BEGIN PGP SIGNATURE-----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=yaaN
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
- More userfaultfs work from Peter Xu.
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
- Some filemap cleanups from Vishal Moola.
- David Hildenbrand added the ability to selftest anon memory COW handling.
- Some cpuset simplifications from Liu Shixin.
- Addition of vmalloc tracing support by Uladzislau Rezki.
- Some pagecache folioifications and simplifications from Matthew Wilcox.
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword. This series shold have been in the
non-MM tree, my bad.
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages.
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages.
- Peter Xu utilized the PTE marker code for handling swapin errors.
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient.
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand.
- zram support for multiple compression streams from Sergey Senozhatsky.
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway.
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations.
- Vishal Moola removed the try_to_release_page() wrapper.
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache.
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking.
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend.
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range().
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen.
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect.
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages().
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting.
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines.
- Many singleton patches, as usual.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
CodAgiA51qwzId3GRytIo/tfWZSezgA=
=d19R
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
driver in order to be able to run multiple different test patterns.
Rework things and remove the BROKEN dependency so that the driver can be
enabled (Jithu Joseph)
- Remove the subsys interface usage in the microcode loader because it
is not really needed
- A couple of smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=Z2Nu
-----END PGP SIGNATURE-----
Merge tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode and IFS updates from Borislav Petkov:
"The IFS (In-Field Scan) stuff goes through tip because the IFS driver
uses the same structures and similar functionality as the microcode
loader and it made sense to route it all through this branch so that
there are no conflicts.
- Add support for multiple testing sequences to the Intel In-Field
Scan driver in order to be able to run multiple different test
patterns. Rework things and remove the BROKEN dependency so that
the driver can be enabled (Jithu Joseph)
- Remove the subsys interface usage in the microcode loader because
it is not really needed
- A couple of smaller fixes and cleanups"
* tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/microcode/intel: Do not retry microcode reloading on the APs
x86/microcode/intel: Do not print microcode revision and processor flags
platform/x86/intel/ifs: Add missing kernel-doc entry
Revert "platform/x86/intel/ifs: Mark as BROKEN"
Documentation/ABI: Update IFS ABI doc
platform/x86/intel/ifs: Add current_batch sysfs entry
platform/x86/intel/ifs: Remove reload sysfs entry
platform/x86/intel/ifs: Add metadata validation
platform/x86/intel/ifs: Use generic microcode headers and functions
platform/x86/intel/ifs: Add metadata support
x86/microcode/intel: Use a reserved field for metasize
x86/microcode/intel: Add hdr_type to intel_microcode_sanity_check()
x86/microcode/intel: Reuse microcode_sanity_check()
x86/microcode/intel: Use appropriate type in microcode_sanity_check()
x86/microcode/intel: Reuse find_matching_signature()
platform/x86/intel/ifs: Remove memory allocation from load path
platform/x86/intel/ifs: Remove image loading during init
platform/x86/intel/ifs: Return a more appropriate error code
platform/x86/intel/ifs: Remove unused selection
x86/microcode: Drop struct ucode_cpu_info.valid
...
* Fix refcount error in del_mtd_device()
* Fix possible resource leak in init_mtd()
* Set ROOT_DEV for partitions marked as rootfs in DT
* Describe marking rootfs partitions in the bindings
* Fix device name leak when register device failed in add_mtd_device()
* Try to find OF node for every MTD partition
* simplify (a bit) code find partition-matching dynamic OF node
MTD driver changes:
* pxa2xx-flash maps: fix memory leak in probe
* BCM parser: refer to ARCH_BCMBCA instead of ARCH_BCM4908
* lpddr2_nvm: Fix possible null-ptr-deref
* inftlcore: fix repeated words in comments
* lart: remove driver
* tplink:
- Add TP-Link SafeLoader partitions table parser and bindings
- Describe TP-Link SafeLoader parser
- Describe TP-Link SafeLoader dynamic subpartitions
* mtdoops:
- Panic caused mtdoops to call mtdoops_erase function immediately
- Add mtdoops_erase function and move mtdoops_inc_counter to after it
- Change printk() to counterpart pr_ functions
MTD binding cleanup:
* Fixed-partitions: Fix 'sercomm,scpart-id' schema
* Standardize the style in the examples
* Drop object types when referencing other files
* Argue in favor of keeping additionalProperties set to true
* NVMEM-cells:
- Inherit from MTD partitions
- Drop range property from example
* Partitions:
- Change qcom,smem-part partition type
- Constrain the list of parsers
* Physmap: Reuse the generic definitions
* SPI-NOR: Drop common properties
* Sunxi-nand: Add an example to validate the bindings
* Onenand: Mention the expected node name
* Ingenic: Mark partitions in the controller node as deprecated
* NAND:
- Standardize the child node name
- Drop common properties already defined in generic files
- nand-chip.yaml should reference mtd.yaml
* Remove useless file about partitions
* Clarify all partition subnodes
SPI NOR core changes:
* Add support for flash reset using the dt reset-gpios property.
* Update hwcaps.mask to include 8D-8D-8D read and page program ops
when xSPI profile 1.0 table is defined.
* Bypass zero erase size in spi_nor_find_best_erase_type().
* Fix select_uniform_erase to skip 0 erase size
* Add generic flash driver. If a flash is not found in the flash_info
array, fall back to the generic flash driver which is described solely
by the flash's SFDP tables.
* Fix the number of bytes for the dummy cycles in
spi_nor_spimem_check_readop().
* Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP discoverable.
SPI NOR manufacturer drivers changes:
* Spansion:
- use PARSE_SFDP for s28hs512t,
- add support for s28hl512t, s28hl01gt, and s28hs01gt.
* Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
* Micron - ST: Enable locking for mt25qu256a.
* Winbond: Add support for W25Q512NW-IQ.
* ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.
Raw NAND core changes:
* Drop obsolete dependencies on COMPILE_TEST
* MAINTAINERS: rectify entry for MESON NAND controller bindings
* Drop EXPORT_SYMBOL_GPL for nanddev_erase()
Raw NAND driver changes:
* marvell: Enable NFC/DEVBUS arbiter
* gpmi: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
* mpc5121: Replace NO_IRQ by 0
* lpc32xx_{slc,mlc}:
- Switch to using pm_ptr()
- Switch to using gpiod API
* lpc32xx_mlc: Switch to using pm_ptr()
* cadence: Support 64-bit slave dma interface
* rockchip: Describe rk3128-nfc in the bindings
* brcmnand: Update interrupts description in the bindings
SPI-NAND driver changes:
* winbond:
- Add Winbond W25N02KV flash support
- Fix flash identification
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmOOBbQACgkQJWrqGEe9
VoRB7wf9EY8IeRhumaeN9WT+VrmPxGOu61m/eilUK4xvgj6JX/yhYo/kKW9eEp+o
5I8JLimG6uo7rZNlbixGMbHd41aTu9MplLrTA42nzGadl3w4D8p9c1ic6sEiv7SI
qgnAbzq3FLUPDLLDV0IfrMQvsQgJkv3b+r8ShPt9uJy3cmnKQzOvIhs43wwLnOXp
NPiMbVjpS4FAmNvG7nI0xfcBLO/eFaTuQc+UyfP2SwkVIAN5xfUAwOPOHZWBstmR
zhJlHSFJWrg+J9T9bsRW7D5q/MVxqNsMH589c9aXHNqzgzZs2FTopDUf6cWwHr0f
2Ssot2naIdvU+eLGA12hDuUDDoRwKA==
=Igti
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Fix refcount error in del_mtd_device()
- Fix possible resource leak in init_mtd()
- Set ROOT_DEV for partitions marked as rootfs in DT
- Describe marking rootfs partitions in the bindings
- Fix device name leak when register device fails in add_mtd_device()
- Try to find OF node for every MTD partition
- simplify (a bit) code find partition-matching dynamic OF node
MTD driver changes:
- pxa2xx-flash maps: fix memory leak in probe
- BCM parser: refer to ARCH_BCMBCA instead of ARCH_BCM4908
- lpddr2_nvm: Fix possible null-ptr-deref
- inftlcore: fix repeated words in comments
- lart: remove driver
- tplink:
- Add TP-Link SafeLoader partitions table parser and bindings
- Describe TP-Link SafeLoader parser
- Describe TP-Link SafeLoader dynamic subpartitions
- mtdoops:
- Panic caused mtdoops to call mtdoops_erase function immediately
- Add mtdoops_erase function and move mtdoops_inc_counter after it
- Change printk() to counterpart pr_ functions
MTD binding cleanup:
- Fixed-partitions: Fix 'sercomm,scpart-id' schema
- Standardize the style in the examples
- Drop object types when referencing other files
- Argue in favor of keeping additionalProperties set to true
- NVMEM-cells:
- Inherit from MTD partitions
- Drop range property from example
- Partitions:
- Change qcom,smem-part partition type
- Constrain the list of parsers
- Physmap: Reuse the generic definitions
- SPI-NOR: Drop common properties
- Sunxi-nand: Add an example to validate the bindings
- Onenand: Mention the expected node name
- Ingenic: Mark partitions in the controller node as deprecated
- NAND:
- Standardize the child node name
- Drop common properties already defined in generic files
- nand-chip.yaml should reference mtd.yaml
- Remove useless file about partitions
- Clarify all partition subnodes
SPI NOR core changes:
- Add support for flash reset using the dt reset-gpios property.
- Update hwcaps.mask to include 8D-8D-8D read and page program ops
when xSPI profile 1.0 table is defined.
- Bypass zero erase size in spi_nor_find_best_erase_type().
- Fix select_uniform_erase to skip 0 erase size
- Add generic flash driver. If a flash is not found in the flash_info
array, fall back to the generic flash driver which is described
solely by the flash's SFDP tables.
- Fix the number of bytes for the dummy cycles in
spi_nor_spimem_check_readop().
- Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP
discoverable.
SPI NOR manufacturer drivers changes:
- Spansion:
- use PARSE_SFDP for s28hs512t,
- add support for s28hl512t, s28hl01gt, and s28hs01gt.
- Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
- Micron - ST: Enable locking for mt25qu256a.
- Winbond: Add support for W25Q512NW-IQ.
- ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.
Raw NAND core changes:
- Drop obsolete dependencies on COMPILE_TEST
- MAINTAINERS: rectify entry for MESON NAND controller bindings
- Drop EXPORT_SYMBOL_GPL for nanddev_erase()
Raw NAND driver changes:
- marvell: Enable NFC/DEVBUS arbiter
- gpmi: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
- mpc5121: Replace NO_IRQ by 0
- lpc32xx_{slc,mlc}:
- Switch to using pm_ptr()
- Switch to using gpiod API
- lpc32xx_mlc: Switch to using pm_ptr()
- cadence: Support 64-bit slave dma interface
- rockchip: Describe rk3128-nfc in the bindings
- brcmnand: Update interrupts description in the bindings
SPI-NAND driver changes:
- winbond:
- Add Winbond W25N02KV flash support
- Fix flash identification"
* tag 'mtd/for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
mtd: rawnand: Drop obsolete dependencies on COMPILE_TEST
mtd: maps: pxa2xx-flash: fix memory leak in probe
mtd: core: Fix refcount error in del_mtd_device()
mtd: spi-nor: add SFDP fixups for Quad Page Program
mtd: spi-nor: issi: is25wp256: Init flash based on SFDP
mtd: spi-nor: winbond: add support for W25Q512NW-IQ
mtd: spi-nor: micron-st: Enable locking for mt25qu256a
mtd: spi-nor: Fix the number of bytes for the dummy cycles
mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt
mtd: spi-nor: Fix formatting in spi_nor_read_raw() kerneldoc comment
mtd: spi-nor: sysfs: print JEDEC ID for generic flash driver
mtd: spi-nor: add generic flash driver
mtd: spi-nor: fix select_uniform_erase to skip 0 erase size
mtd: spi-nor: move function declaration out of sfdp.h
mtd: spi-nor: remember full JEDEC flash ID
mtd: spi-nor: sysfs: hide manufacturer if it is not set
mtd: spi-nor: hide jedec_id sysfs attribute if not present
mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
mtd: rawnand: marvell: Enable NFC/DEVBUS arbiter
mtd: parsers: refer to ARCH_BCMBCA instead of ARCH_BCM4908
...
Initial accel subsystem support. There are no drivers yet, just the framework.
New driver:
- ofdrm - replacement for offb
fbdev:
- add support for nomodeset
fourcc:
- add Vivante tiled modifier
core:
- atomic-helpers: CRTC primary plane test fixes, fb access hooks
- connector: TV API consistency, cmdline parser improvements
- send connector hotplug on cleanup
- sort makefile objects
tests:
- sort kunit tests
- improve DP-MST tests
- add kunit helpers to create a device
sched:
- module param for scheduling policy
- refcounting fix
buddy:
- add back random seed log
ttm:
- convert ttm_resource to size_t
- optimize pool allocations
edid:
- HFVSDB parsing support fixes
- logging/debug improvements
- DSC quirks
dma-buf:
- Add unlocked vmap and attachment mapping
- move drivers to common locking convention
- locking improvements
firmware:
- new API for rPI firmware and vc4
xilinx:
- zynqmp: displayport bridge support
- dpsub fix
bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support, sync improvements
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- Jadard JD9365DA-H3
- NewVision NV3051D
amdgpu:
- DCN support on ARM
- DCN 2.1 secure display
- Sienna Cichlid mode2 reset fixes
- new GC 11.x firmware versions
- drop AMD specific DSC workarounds in favour of drm code
- clang warning fixes
- scheduler rework
- SR-IOV fixes
- GPUVM locking fixes
- fix memory leak in CS IOCTL error path
- flexible array updates
- enable new GC/PSP/SMU/NBIO IP
- GFX preemption support for gfx9
amdkfd:
- cache size fixes
- userptr fixes
- enable cooperative launch on gfx 10.3
- enable GC 11.0.4 KFD support
radeon:
- replace kmap with kmap_local_page
- ACPI ref count fix
- HDA audio notifier support
i915:
- DG2 enabled by default
- MTL enablement work
- hotplug refactoring
- VBT improvements
- Display and watermark refactoring
- ADL-P workaround
- temp disable runtime_pm for discrete-
- fix for A380 as a secondary GPU
- Wa_18017747507 for DG2
- CS timestamp support fixes for gen5 and earlier
- never purge busy TTM objects
- use i915_sg_dma_sizes for all backends
- demote GuC kernel contexts to normal priority
- gvt: refactor for new MDEV interface
- enable DC power states on eDP ports
- fix gen 2/3 workarounds
nouveau:
- fix page fault handling
- Ampere acceleration support
- driver stability improvements
- nva3 backlight support
msm:
- MSM_INFO_GET_FLAGS support
- DPU: XR30 and P010 image formats
- Qualcomm SM6115 support
- DSI PHY support for QCM2290
- HDMI: refactored dev init path
- remove exclusive-fence hack
- fix speed-bin detection
- enable clamp to idle on 7c3
- improved hangcheck detection
vmwgfx:
- fb and cursor refactoring
- convert to generic hashtable
- cursor improvements
etnaviv:
- hw workarounds
- softpin MMU fixes
ast:
- atomic gamma LUT support
- convert to SHMEM
lcdif:
- support YUV planes
- Increase DMA burst size
- FIFO threshold tuning
meson:
- fix return type of cvbs mode_valid
mgag200:
- fix PLL setup on some revisions
sun4i:
- A100 and D1 support
udl:
- modesetting improvements
- hot unplug support
vc4:
- support PAL-M
- fix regression preventing 4K @ 60Hz
- fix NULL ptr deref
v3d:
- switch to drm managed resources
renesas:
- RZ/G2L DSI support
- DU Kconfig cleanup
mediatek:
- fixup dpi and hdmi
- MT8188 dpi support
- MT8195 AFBC support
tegra:
- NVDEC hardware on Tegra234 SoC
hdlcd:
- switch to drm managed resources
ingenic:
- fix registration error path
hisilicon:
- convert to drm_mode_init
maildp:
- use managed resources
mtk:
- use drm_mode_init
rockchip:
- use drm_mode_copy
-----BEGIN PGP SIGNATURE-----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=pABG
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"The biggest highlight is that the accel subsystem framework is merged.
Hopefully for 6.3 we will be able to line up a driver to use it.
In drivers land, i915 enables DG2 support by default now, and nouveau
has a big stability refactoring and initial ampere support, AMD
includes new hw IP support and should build on ARM again. There is
also an ofdrm driver to take over offb on platforms it's used.
Stuff outside my tree, the dma-buf patches hit a few places, the vc4
firmware changes also do, and i915 has some interactions with MEI for
discrete GPUs. I think all of those should have been acked/reviewed by
relevant parties.
New driver:
- ofdrm - replacement for offb
fbdev:
- add support for nomodeset
fourcc:
- add Vivante tiled modifier
core:
- atomic-helpers: CRTC primary plane test fixes, fb access hooks
- connector: TV API consistency, cmdline parser improvements
- send connector hotplug on cleanup
- sort makefile objects
tests:
- sort kunit tests
- improve DP-MST tests
- add kunit helpers to create a device
sched:
- module param for scheduling policy
- refcounting fix
buddy:
- add back random seed log
ttm:
- convert ttm_resource to size_t
- optimize pool allocations
edid:
- HFVSDB parsing support fixes
- logging/debug improvements
- DSC quirks
dma-buf:
- Add unlocked vmap and attachment mapping
- move drivers to common locking convention
- locking improvements
firmware:
- new API for rPI firmware and vc4
xilinx:
- zynqmp: displayport bridge support
- dpsub fix
bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support, sync improvements
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
panel:
- panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
- Jadard JD9365DA-H3
- NewVision NV3051D
amdgpu:
- DCN support on ARM
- DCN 2.1 secure display
- Sienna Cichlid mode2 reset fixes
- new GC 11.x firmware versions
- drop AMD specific DSC workarounds in favour of drm code
- clang warning fixes
- scheduler rework
- SR-IOV fixes
- GPUVM locking fixes
- fix memory leak in CS IOCTL error path
- flexible array updates
- enable new GC/PSP/SMU/NBIO IP
- GFX preemption support for gfx9
amdkfd:
- cache size fixes
- userptr fixes
- enable cooperative launch on gfx 10.3
- enable GC 11.0.4 KFD support
radeon:
- replace kmap with kmap_local_page
- ACPI ref count fix
- HDA audio notifier support
i915:
- DG2 enabled by default
- MTL enablement work
- hotplug refactoring
- VBT improvements
- Display and watermark refactoring
- ADL-P workaround
- temp disable runtime_pm for discrete-
- fix for A380 as a secondary GPU
- Wa_18017747507 for DG2
- CS timestamp support fixes for gen5 and earlier
- never purge busy TTM objects
- use i915_sg_dma_sizes for all backends
- demote GuC kernel contexts to normal priority
- gvt: refactor for new MDEV interface
- enable DC power states on eDP ports
- fix gen 2/3 workarounds
nouveau:
- fix page fault handling
- Ampere acceleration support
- driver stability improvements
- nva3 backlight support
msm:
- MSM_INFO_GET_FLAGS support
- DPU: XR30 and P010 image formats
- Qualcomm SM6115 support
- DSI PHY support for QCM2290
- HDMI: refactored dev init path
- remove exclusive-fence hack
- fix speed-bin detection
- enable clamp to idle on 7c3
- improved hangcheck detection
vmwgfx:
- fb and cursor refactoring
- convert to generic hashtable
- cursor improvements
etnaviv:
- hw workarounds
- softpin MMU fixes
ast:
- atomic gamma LUT support
- convert to SHMEM
lcdif:
- support YUV planes
- Increase DMA burst size
- FIFO threshold tuning
meson:
- fix return type of cvbs mode_valid
mgag200:
- fix PLL setup on some revisions
sun4i:
- A100 and D1 support
udl:
- modesetting improvements
- hot unplug support
vc4:
- support PAL-M
- fix regression preventing 4K @ 60Hz
- fix NULL ptr deref
v3d:
- switch to drm managed resources
renesas:
- RZ/G2L DSI support
- DU Kconfig cleanup
mediatek:
- fixup dpi and hdmi
- MT8188 dpi support
- MT8195 AFBC support
tegra:
- NVDEC hardware on Tegra234 SoC
hdlcd:
- switch to drm managed resources
ingenic:
- fix registration error path
hisilicon:
- convert to drm_mode_init
maildp:
- use managed resources
mtk:
- use drm_mode_init
rockchip:
- use drm_mode_copy"
* tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits)
drm/amdgpu: fix mmhub register base coding error
drm/amdgpu: add tmz support for GC IP v11.0.4
drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4
drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4
drm/amdgpu: enable GFX IP v11.0.4 CG support
drm/amdgpu: Make amdgpu_ring_mux functions as static
drm/amdgpu: generally allow over-commit during BO allocation
drm/amd/display: fix array index out of bound error in DCN32 DML
drm/amd/display: 3.2.215
drm/amd/display: set optimized required for comp buf changes
drm/amd/display: Add debug option to skip PSR CRTC disable
drm/amd/display: correct DML calc error of UrgentLatency
drm/amd/display: correct static_screen_event_mask
drm/amd/display: Ensure commit_streams returns the DC return code
drm/amd/display: read invalid ddc pin status cause engine busy
drm/amd/display: Bypass DET swath fill check for max clocks
drm/amd/display: Disable uclk pstate for subvp pipes
drm/amd/display: Fix DCN2.1 default DSC clocks
drm/amd/display: Enable dp_hdmi21_pcon support
drm/amd/display: prevent seamless boot on displays that don't have the preferred dig
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmOScsgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpi5ID/9pLXFYOq1+uDjU0KO/MdjMjK8Ukr34lCnk
WkajRLheE8JBKOFDE54XJk56sQSZHX9bTWqziar0h1fioh7FlQR/tVvzsERCm2M9
2y9THJNJygC68wgybStyiKlshFjl7TD7Kv5N9Y3xP3mkQygT+D6o8fXZk5xQbYyH
YdFSoq4rJVHxRL03yzQiReGGIYdOUEQQh8l1FiLwLlKa3lXAey1KuxWIzksVN0KK
aZB4QhiBpOiPgDHUVisq2XtyQjpZ2byoCImPzgrcqk9Jo4esvm/e6esrg4xlsvII
LKFFkTmbVqjUZtFjqakFHmfuzVor4nU5f+xb90ZHExuuODYckkxWp5rWhf9QwqqI
0ik6WYgI1/5vnHnX8f2DYzOFQf9qa/rLgg0CshyUODlD6RfHa9vntqYvlIFkmOBd
Q7KblIoK8YTzUS1M+v7X8JQ7gDR2KwygH37Da2KJS+vgvfIb8kJGr1ZORuhJuJJ7
Bl69gaNkHTHrqufp7UI64YXfueeuNu2J9z3zwzGoxeaFaofF/phDn0/2gCQE1fQI
XBhsMw+ETqI6B2SPHMnzYDu2DM1S8ZTOYQlaD4G3uqgWnAM1tG707395uAy5yu4n
D5azU1fVG4UocoNIyPujpaoSRs2zWZycEFEeUQkhyDDww/j4hlHi6H33eOnk0zsr
wxzFGfvHfw==
=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
- Thoroughly rewrite the data structures that implement perf task context handling,
with the goal of fixing various quirks and unfeatures both in already merged,
and in upcoming proposed code.
The old data structure is the per task and per cpu perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and
a single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd27568117 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology discovery
on various hardware models.
- Misc fixes & cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KNaI
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Thoroughly rewrite the data structures that implement perf task
context handling, with the goal of fixing various quirks and
unfeatures both in already merged, and in upcoming proposed code.
The old data structure is the per task and per cpu
perf_event_contexts:
task_struct::perf_events_ctxp[] <-> perf_event_context <-> perf_cpu_context
^ | ^ | ^
`---------------------------------' | `--> pmu ---'
v ^
perf_event ------'
In this new design this is replaced with a single task context and a
single CPU context, plus intermediate data-structures:
task_struct::perf_event_ctxp -> perf_event_context <- perf_cpu_context
^ | ^ ^
`---------------------------' | |
| | perf_cpu_pmu_context <--.
| `----. ^ |
| | | |
| v v |
| ,--> perf_event_pmu_context |
| | |
| | |
v v |
perf_event ---> pmu ----------------'
[ See commit bd27568117 for more details. ]
This rewrite was developed by Peter Zijlstra and Ravi Bangoria.
- Optimize perf_tp_event()
- Update the Intel uncore PMU driver, extending it with UPI topology
discovery on various hardware models.
- Misc fixes & cleanups
* tag 'perf-core-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()
perf/x86/intel/uncore: Make set_mapping() procedure void
perf/x86/intel/uncore: Update sysfs-devices-mapping file
perf/x86/intel/uncore: Enable UPI topology discovery for Sapphire Rapids
perf/x86/intel/uncore: Enable UPI topology discovery for Icelake Server
perf/x86/intel/uncore: Get UPI NodeID and GroupID
perf/x86/intel/uncore: Enable UPI topology discovery for Skylake Server
perf/x86/intel/uncore: Generalize get_topology() for SKX PMUs
perf/x86/intel/uncore: Disable I/O stacks to PMU mapping on ICX-D
perf/x86/intel/uncore: Clear attr_update properly
perf/x86/intel/uncore: Introduce UPI topology type
perf/x86/intel/uncore: Generalize IIO topology support
perf/core: Don't allow grouping events from different hw pmus
perf/amd/ibs: Make IBS a core pmu
perf: Fix function pointer case
perf/x86/amd: Remove the repeated declaration
perf: Fix possible memleak in pmu_dev_alloc()
...
This patch introduces a runtime hot/cold data separation method
for f2fs, in order to improve the accuracy for data temperature
classification, reduce the garbage collection overhead after
long-term data updates.
Enhanced hot/cold data separation can record data block update
frequency as "age" of the extent per inode, and take use of the age
info to indicate better temperature type for data block allocation:
- It records total data blocks allocated since mount;
- When file extent has been updated, it calculate the count of data
blocks allocated since last update as the age of the extent;
- Before the data block allocated, it searches for the age info and
chooses the suitable segment for allocation.
Test and result:
- Prepare: create about 30000 files
* 3% for cold files (with cold file extension like .apk, from 3M to 10M)
* 50% for warm files (with random file extension like .FcDxq, from 1K
to 4M)
* 47% for hot files (with hot file extension like .db, from 1K to 256K)
- create(5%)/random update(90%)/delete(5%) the files
* total write amount is about 70G
* fsync will be called for .db files, and buffered write will be used
for other files
The storage of test device is large enough(128G) so that it will not
switch to SSR mode during the test.
Benefit: dirty segment count increment reduce about 14%
- before: Dirty +21110
- after: Dirty +18286
Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com>
Signed-off-by: xiongping1 <xiongping1@xiaomi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device unlock.
- Add a facility for the kernel to warn about collisions between kernel
and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
=HAQk
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.2.
While it may seem backwards, the CXL update this time around includes
some focus on CXL 1.x enabling where the work to date had been with
CXL 2.0 (VH topologies) in mind.
First generation CXL can mostly be supported via BIOS, similar to DDR,
however it became clear there are use cases for OS native CXL error
handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
hosts (Restricted CXL Host (RCH) topologies). So, this update brings
RCH topologies into the Linux CXL device model.
In support of the ongoing CXL 2.0+ enabling two new core kernel
facilities are added.
One is the ability for the kernel to flag collisions between userspace
access to PCI configuration registers and kernel accesses. This is
brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
mailbox over config-cycles.
The other is a cpu_cache_invalidate_memregion() API that maps to
wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
VMs and architectures that do not support it yet. The CXL paths that
need it, dynamic memory region creation and security commands (erase /
unlock), are disabled when it is not present.
As for the CXL 2.0+ this cycle the subsystem gains support Persistent
Memory Security commands, error handling in response to PCIe AER
notifications, and support for the "XOR" host bridge interleave
algorithm.
Summary:
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
response to physical memory reconfiguration, or memory-side data
invalidation from operations like secure erase or memory-device
unlock.
- Add a facility for the kernel to warn about collisions between
kernel and userspace access to PCI configuration registers
- Add support for Restricted CXL Host (RCH) topologies (formerly CXL
1.1)
- Add handling and reporting of CXL errors reported via the PCIe AER
mechanism
- Add support for CXL Persistent Memory Security commands
- Add support for the "XOR" algorithm for CXL host bridge interleave
- Rework / simplify CXL to NVDIMM interactions
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
cxl/region: Fix memdev reuse check
cxl/pci: Remove endian confusion
cxl/pci: Add some type-safety to the AER trace points
cxl/security: Drop security command ioctl uapi
cxl/mbox: Add variable output size validation for internal commands
cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
cxl/security: Fix Get Security State output payload endian handling
cxl: update names for interleave ways conversion macros
cxl: update names for interleave granularity conversion macros
cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
tools/testing/cxl: Require cache invalidation bypass
cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
cxl/region: Fix spelling mistake "memergion" -> "memregion"
cxl/regs: Fix sparse warning
cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
tools/testing/cxl: Add an RCH topology
cxl/port: Add RCD endpoint port enumeration
cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
tools/testing/cxl: Add XOR Math support to cxl_test
cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
...
Highlights:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having
to add more and more quirks
- android-x86-tablets: Add support for 2 more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- battery: Pass battery hook pointer to hook callbacks
ISST:
- Fix typo in comments
Move existing HP drivers to a new hp subdir:
- Move existing HP drivers to a new hp subdir
dell:
- Add new dell-wmi-ddv driver
dell-ddv:
- Warn if ePPID has a suspicious length
- Improve buffer handling
huawei-wmi:
- remove unnecessary member
- fix return value calculation
- do not hard-code sizes
ideapad-laptop:
- Make touchpad_ctrl_via_ec a module option
- Stop writing VPCCMD_W_TOUCHPAD at probe time
- Send KEY_TOUCHPAD_TOGGLE on some models
- Only toggle ps2 aux port on/off on select models
- Do not send KEY_TOUCHPAD* events on probe / resume
- Refactor ideapad_sync_touchpad_state()
- support for more special keys in WMI
- Add new _CFG bit numbers for future use
- Revert "check for touchpad support in _CFG"
intel/pmc:
- Relocate Alder Lake PCH support
- Relocate Tiger Lake PCH support
- Relocate Ice Lake PCH support
- Relocate Cannon Lake Point PCH support
- Relocate Sunrise Point PCH support
- Move variable declarations and definitions to header and core.c
- Replace all the reg_map with init functions
intel/pmc/core:
- Add Meteor Lake support to pmc core driver
intel_scu_ipc:
- fix possible name leak in __intel_scu_ipc_register()
mxm-wmi:
- fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/mellanox:
- mlxbf-pmc: Fix event typo
- Add BlueField-3 support in the tmfifo driver
platform/x86/amd:
- pmc: Add a workaround for an s0i3 issue on Cezanne
platform/x86/amd/pmf:
- pass the struct by reference
platform/x86/dell:
- alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86/intel:
- pmc: Fix repeated word in comment
platform/x86/intel/hid:
- Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86/intel/sdsi:
- Add meter certificate support
- Support different GUIDs
- Hide attributes if hardware doesn't support
- Add Intel On Demand text
sony-laptop:
- Convert to use sysfs_emit_at() API
thinkpad_acpi:
- use strstarts()
- Fix max_brightness of thinklight
tools/arch/x86:
- intel_sdsi: Add support for reading meter certificates
- intel_sdsi: Add support for new GUID
- intel_sdsi: Read more On Demand registers
- intel_sdsi: Add Intel On Demand text
- intel_sdsi: Add support for reading state certificates
uv_sysfs:
- Use sysfs_emit() instead of scnprintf()
wireless-hotkey:
- use ACPI HID as phys
x86-android-tablets:
- Add Advantech MICA-071 extra button
- Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
- Add Medion Lifetab S10346 data
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmOW+QgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yAPwf/dAYLHiC2ox5YlNTLX2DvU+jOpeBv
W+EIx4oHQz1+O9jrWMLyvS9zTwTEAf6ANLiMP3damEvtJnB72ClgFITzlJAaB4zN
yj0SdxoBRMt6zDL2QwMkwitvb5kJonLfO2H7NsMwA6f0KP1X8sio3oVRAMMVwlzz
nwDKM/VBpuxmy+d880wRRoAkgRkTsPIOwBkYdo1525NU7kkTmtrMpgM+SXQsHTJn
TB9uQnyuiq5/znh3k1Qn+OGwXQezmGz2Fb76IcW5RzUQDew6n6b3kzILee5ddynT
Pa7/ibwpV+FtZjm2kS/l4tV+WPdA+s5TSWoq7Hz0jzBX9GdOORcMZmEneg==
=z16d
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel:
- PMC: Add support for Meteor Lake
- Intel On Demand: various updates
- Ideapad-laptop:
- Add support for various Fn keys on new models
- Fix touchpad on/off handling in a generic way to avoid having to
add more and more quirks
- Android x86 tablets:
- Add support for two more X86 Android tablet models
- New Dell WMI DDV driver
- Miscellaneous cleanups and small bugfixes
* tag 'platform-drivers-x86-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (52 commits)
platform/mellanox: mlxbf-pmc: Fix event typo
platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()
platform/x86: sony-laptop: Convert to use sysfs_emit_at() API
platform/x86/dell: alienware-wmi: Use sysfs_emit() instead of scnprintf()
platform/x86: uv_sysfs: Use sysfs_emit() instead of scnprintf()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
platform/x86: x86-android-tablets: Add Advantech MICA-071 extra button
platform/x86: x86-android-tablets: Add Lenovo Yoga Tab 3 (YT3-X90F) charger + fuel-gauge data
platform/x86: x86-android-tablets: Add Medion Lifetab S10346 data
platform/x86: wireless-hotkey: use ACPI HID as phys
platform/x86/intel/hid: Add module-params for 5 button array + SW_TABLET_MODE reporting
platform/x86: ideapad-laptop: Make touchpad_ctrl_via_ec a module option
platform/x86: ideapad-laptop: Stop writing VPCCMD_W_TOUCHPAD at probe time
platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models
platform/x86: ideapad-laptop: Only toggle ps2 aux port on/off on select models
platform/x86: ideapad-laptop: Do not send KEY_TOUCHPAD* events on probe / resume
platform/x86: ideapad-laptop: Refactor ideapad_sync_touchpad_state()
tools/arch/x86: intel_sdsi: Add support for reading meter certificates
tools/arch/x86: intel_sdsi: Add support for new GUID
tools/arch/x86: intel_sdsi: Read more On Demand registers
...
In the specification documents for the Uncompressed and MJPEG USB
Video Payloads, the field name is bmInterlaceFlags - it has been
misnamed within the kernel.
Although renaming the field does break the kernel's interface to
userspace it should be low-risk in this instance. The field is read
only and hardcoded to 0, so there was never any value in anyone
reading it. A search of the uvc-gadget application and all the
forks that I could find for it did not reveal any users either.
Fixes: cdda479f15 ("USB gadget: video class function driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20221206161203.1562827-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Add support for flash reset using the dt reset-gpios property.
* Update hwcaps.mask to include 8D-8D-8D read and page program ops
when xSPI profile 1.0 table is defined.
* Bypass zero erase size in spi_nor_find_best_erase_type().
* Fix select_uniform_erase to skip 0 erase size
* Add generic flash driver. If a flash is not found in the flash_info
array, fall back to the generic flash driver which is described solely
by the flash's SFDP tables.
* Fix the number of bytes for the dummy cycles in
spi_nor_spimem_check_readop().
* Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP discoverable.
SPI NOR manufacturer drivers changes:
* Spansion:
- use PARSE_SFDP for s28hs512t,
- add support for s28hl512t, s28hl01gt, and s28hs01gt.
* Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
* Micron - ST: Enable locking for mt25qu256a.
* Winbond: Add support for W25Q512NW-IQ.
* ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmOJ59AACgkQS1VPR6WN
FOnzOQf/WLBTNFtPcJoS7cdjlh4fuGySDUKuLifOX+Tmk/ki3XFCZR98cESgb5m+
hCyFDeER/qfdOK9ObT3K1GBS6x7zx8YkskbucjAU0vlIsr2ZHCjNpNiAHrADsKjR
579N0Xwh2ibh7uVJ1xvsPwObdAc8P/tjGHHWF6hGEZzIPYXJVce+qDktkkLfbZ/P
Fik6+y3h68wW/0kDNt/gNmNcb5Z3fjxySs21Np5sy7bUtVVBjHWLo0OpjNadDH9M
m6AkhFA5h9OVl5E4jHBpxc4NvlAa5f6520vESpieseNJiIMWo0W/eSkVsframFew
ILdtXCHjkbS6kgvSpUViobMFsgCjaA==
=Yi2q
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-6.2' into mtd/next
SPI NOR core changes:
* Add support for flash reset using the dt reset-gpios property.
* Update hwcaps.mask to include 8D-8D-8D read and page program ops
when xSPI profile 1.0 table is defined.
* Bypass zero erase size in spi_nor_find_best_erase_type().
* Fix select_uniform_erase to skip 0 erase size
* Add generic flash driver. If a flash is not found in the flash_info
array, fall back to the generic flash driver which is described solely
by the flash's SFDP tables.
* Fix the number of bytes for the dummy cycles in
spi_nor_spimem_check_readop().
* Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP discoverable.
SPI NOR manufacturer drivers changes:
* Spansion:
- use PARSE_SFDP for s28hs512t,
- add support for s28hl512t, s28hl01gt, and s28hs01gt.
* Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
* Micron - ST: Enable locking for mt25qu256a.
* Winbond: Add support for W25Q512NW-IQ.
* ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.
Fix merge conflict in the jedec,spi-nor bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Since Warn count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/warn_count to expose it to userspace.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-6-keescook@chromium.org
Way back in 2016 in commit 5a8b187c61 ("pktcdvd: mark as unmaintained
and deprecated") this driver was marked as "will be removed soon". 5
years seems long enough to have it stick around after that, so finally
remove the thing now.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221202182758.1339039-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add provider name in order to associate cxl test dimm from cxl_test to the
cxl pmem device when going through sysfs for security testing.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618174.2734609.15600031015423828810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add an id group attribute for CXL based nvdimm object. The addition allows
ndctl to display the "unique id" for the nvdimm. The serial number for the
CXL memory device will be used for this id.
[
{
"dev":"nmem10",
"id":"0x4",
"security":"disabled"
},
]
The id attribute is needed by the ndctl security key management to setup a
keyblob with a unique file name tied to the mem device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617029.2734609.8251308562882142281.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since Oops count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/oops_count to expose it to userspace.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-3-keescook@chromium.org
This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-21-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-18-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This documents the new /sys/class/bdi/<bdi>/min_bytes knob.
[akpm@linux-foundation.org: fix htmldocs warnings]
Link: https://lkml.kernel.org/r/20221119005215.3052436-15-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This documents the new /sys/class/bdi/<bdi>/max_bytes knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-10-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This documents the new /sys/class/bdi/<bdi>/strict_limit knob.
Link: https://lkml.kernel.org/r/20221119005215.3052436-4-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Cc: Chris Mason <clm@meta.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON ABI document for the 'tried_regions' directory of DAMON
sysfs interface.
Link: https://lkml.kernel.org/r/20221101220328.95765-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmN+QSEACgkQZR1NuKta
54Ducgf+PsD85BWXlqWkTa2S8tn7h+OCETapAEY+JMRu1UB15ccLGZlH1O/L2try
NBjUEcbzvS1KPYmNMubKXOIlacTJrukaoqvtMfLSe1+Y/zvfTpF1+LGLp39wSRo8
R36A1VEQxalSZoFhQMERVoWBfjiVaW3ENqe3H9Vb/ab9QdMUzP4P4uaLsECtsLSy
ft31ZcN+jPjhjSYC7xZjzd3KXvVqlQ/5TsXdX6nsxphrOUiKxT55Gsypkx5O4vt1
Q4aw+v3Z0NgknDF90n7O90y/wgE3OqKHiKl+9l7lS/WkLhhaWknJ9zJlfLI8uiEH
UjMku/EpH6SSN5hrCDQvtFaXJSgiWQ==
=cHXD
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v6.2:
- New feature of graceful hard-reset. Instead of immediately killing the
user-process when a command submission times out, we wait a bit and give
the user-process notification and let it try to close things gracefully,
with the ability to retrieve debug information.
- Enhance the EventFD mechanism. Add new events such as access to illegal
address (RAZWI), page fault, device unavailable. In addition, change the
event workqueue to be handled in a single-threaded workqueue.
- Allow the control device to work during reset of the ASIC, to enable
monitoring applications to continue getting the data.
- Add handling for Gaudi2 with PCI revision 2.
- Reduce severity of prints due to power/thermal events.
- Change how we use the h/w to perform memory scrubbing in Gaudi2.
- Multiple bug fixes, refactors and renames.
* tag 'misc-habanalabs-next-2022-11-23' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (63 commits)
habanalabs: fix VA range calculation
habanalabs: fail driver load if EEPROM errors detected
habanalabs: make print of engines idle mask more readable
habanalabs: clear non-released encapsulated signals
habanalabs: don't put context in hl_encaps_handle_do_release_sob()
habanalabs: print context refcount value if hard reset fails
habanalabs: add RMWREG32_SHIFTED to set a val within a mask
habanalabs: fix rc when new CPUCP opcodes are not supported
habanalabs/gaudi2: added memset for the cq_size register
habanalabs: added return value check for hl_fw_dynamic_send_clear_cmd()
habanalabs: increase the size of busy engines mask
habanalabs/gaudi2: change memory scrub mechanism
habanalabs: extend process wait timeout in device fine
habanalabs: check schedule_hard_reset correctly
habanalabs: reset device if still in use when released
habanalabs/gaudi2: return to reset upon SM SEI BRESP error
habanalabs/gaudi2: don't enable entries in the MSIX_GW table
habanalabs/gaudi2: remove redundant firmware version check
habanalabs/gaudi: fix print for firmware-alive event
habanalabs: fix print for out-of-sync and pkt-failure events
...
Through this node, you can control the background discard
to run more aggressively or not aggressively when reach the
utilization rate of the space.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's fix the inconsistency in the text description.
Default discard granularity is 16. For small devices,
default value is 1.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
-----BEGIN PGP SIGNATURE-----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=Fo38
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
iio: pressure: bmp280: convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
iio: adc: ad4130: depend on GPIOLIB
staging: iio: meter: replace ternary operator by if condition
iio: light: apds9960: Fix iio_event_spec structures
dt-bindings: iio: imu: Add inv_icm42600 documentation
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
iio: proximity: sx9360: Add a new ACPI hardware ID
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
...
Add description for /sys/devices/uncore_upi_*/die* attributes to
sysfs-devices-mapping.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221117122833.3103580-11-alexander.antonov@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Backmerge tag 'v6.1-rc6' into drm-next
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sphinx reports two warnings on sysfs documentation for AD4130 driver:
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Block quote ends without a blank line; unexpected unindent.
These are due to misformatting of sinc* modes list. Format it with bullet
list. Since each entry spans multiple lines, separate each with a blank
line.
Fixes: 62094060cf ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221106140233.74112-1-bagasdotme@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.
The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221021104115.1812486-3-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch includes an enhancement requested frequently on the mailing
list.[1][2] It adds a variable, cur_phonetic in the spk_vars, which can
be set as a module parameter, as well as in /sys/speakup/cur_phonetic.
This patch also documents cur_phonetic as a sysfs attribute in
sysfs-driver-speakup.
When cur_phonetic=1, it causes speakup to speak letters phonetically if
paused on the character while arrowing through a word.
When a user does not set cur_phonetic to any value, the default value
for it would be 0.
[1]: https://github.com/linux-speakup/speakup/issues/6
[2]: https://github.com/linux-speakup/speakup/issues/5
since V1:
- removed unnecessary lines
Signed-off-by: Mushahid Hussain<mushi.shar@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221115100530.91174-3-mushi.shar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an option to control the timeout value for the driver's watchdog
of the reset process. The timeout represents the amount of the user
has to close his process once he gets a device reset notification from
the driver.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The manufacturer may be optional when pure SFDP flashes are supported.
Hide the sysfs property if no manufacturer is set.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-3-michael@walle.cc
Some non-jedec compliant flashes (like the Everspin flashes) don't have
an ID at all. Hide the attribute in this case.
Fixes: 36ac022862 ("mtd: spi-nor: add initial sysfs support")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
Add support for reading the meter certificate from Intel On Demand
hardware. The meter certificate [1] is used to access the utilization
metrics of enabled features in support of the Intel On Demand consumption
model. Similar to the state certificate, the meter certificate is read by
mailbox command.
While making similar changes also use the BIN_ATTR_ADMIN_RO helper to
create the 'registers' sysfs file.
Link: https://github.com/intel-sandbox/debox1.intel_sdsi/blob/gnr-review/meter-certificate.rst [1]
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221119002343.1281885-5-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Intel Software Defined Silicon (SDSi) is now officially known as Intel
On Demand. Add On Demand to the description in the kconfig, documentation,
and driver source.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221119002343.1281885-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove reload documentation and add current_batch documentation.
Update the kernel version and date for all the entries.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221117035935.4136738-16-jithu.joseph@intel.com
The dell-wmi-ddv driver adds support for reading
the current temperature and ePPID of ACPI batteries
on supported Dell machines.
Since the WMI interface used by this driver does not
do any input validation and thus cannot be used for probing,
the driver depends on the ACPI battery extension machanism
to discover batteries.
The driver also supports a debugfs interface for retrieving
buffers containing fan and thermal sensor information.
Since the meaing of the content of those buffers is currently
unknown, the interface is meant for reverse-engineering and
will likely be replaced with an hwmon interface once the
meaning has been understood.
The driver was tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927204521.601887-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Certain files in procfs are formatted in byteorder-dependent formats.
For example the IP addresses in /proc/net/udp.
When using emulation like qemu-user, applications are not guaranteed to
be using the same byteorder as the kernel.
Therefore the kernel needs to provide a way for applications to discover
the byteorder used in API-filesystems.
Using systemcalls is not enough because these are intercepted and
translated by the emulation.
Also this makes it easier for non-compiled applications like
shellscripts to discover the byteorder.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221103152407.3348-1-linux@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add driver support for accessing various information reported by
Ampere's SMpro co-processor such as Boot Progress and other
miscellaneous data.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221031024442.2490881-4-quan@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Ampere's SMpro error monitor driver for monitoring and reporting
RAS-related errors as reported by SMpro co-processor found on Ampere's
Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221031024442.2490881-3-quan@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CBMEM area is a downward-growing memory region used by coreboot to
dynamically allocate tagged data structures ("CBMEM entries") that
remain resident during boot.
This implements a driver which exports access to the CBMEM entries
via sysfs under /sys/bus/coreboot/devices/cbmem-<id>.
This implementation is quite versatile. Examples of how it could be
used are given below:
* Tools like util/cbmem from the coreboot tree could use this driver
instead of finding CBMEM in /dev/mem directly. Alternatively,
firmware developers debugging an issue may find the sysfs interface
more ergonomic than the cbmem tool and choose to use it directly.
* The crossystem tool, which exposes verified boot variables, can use
this driver to read the vboot work buffer.
* Tools which read the BIOS SPI flash (e.g., flashrom) can find the
flash layout in CBMEM directly, which is significantly faster than
searching the flash directly.
Write access is provided to all CBMEM regions via
/sys/bus/coreboot/devices/cbmem-<id>/mem, as the existing cbmem
tooling updates this memory region, and envisioned use cases with
crossystem can benefit from updating memory regions.
Link: https://issuetracker.google.com/239604743
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Jack Rosenthal <jrosenth@chromium.org>
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Link: https://lore.kernel.org/r/20221104161528.531248-1-jrosenth@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add documentation for the p2pmem/allocate binary file which allows
for allocating p2pmem buffers in userspace for passing to drivers
that support them. (Currently only O_DIRECT to NVMe devices.)
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221021174116.7200-10-logang@deltatee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a broken USB accessory connects to a USB host, usbcore might
keep doing enumeration retries. If the host has a watchdog mechanism,
the kernel panic will happen on the host.
This patch provides an attribute early_stop to limit the numbers of retries
for each port of a hub. If a port was marked with early_stop attribute,
unsuccessful connection attempts will fail quickly. In addition, if an
early_stop port has failed to initialize, it will ignore all future
connection events until early_stop attribute is clear.
Signed-off-by: Ray Chi <raychi@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221107072754.3336357-1-raychi@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current code, the following sysfs attributes are exposed to user to
show or update the values:
max_read_buffers (max_tokens)
read_buffer_limit (token_limit)
group/read_buffers_allowed (group/tokens_allowed)
group/read_buffers_reserved (group/tokens_reserved)
group/use_read_buffer_limit (group/use_token_limit)
>From Intel IAA spec [1], Intel IAA does not support Read Buffer
allocation control. So these sysfs attributes should not be supported on
IAA device.
Fix this issue by making these sysfs attributes invisible through
is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that these
attributes are not visible when the device does not support Read Buffer
allocation control.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: fde212e44f ("dmaengine: idxd: deprecate token sysfs attributes for read buffers")
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
The user can set the trial count limit for GC urgent and
idle mode with replaced gc_remaining_trials.. If GC thread gets
to the limit, the mode will turn back to GC normal mode finally.
It was applied only to GC_URGENT, while this patch expands it for
GC_IDLE.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Revert "f2fs: make gc_urgent and gc_segment_mode sysfs node readable".
Add a gc_mode sysfs node to show the current gc_mode as a string.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The current max_ordered_discard is a fixed value, change it to be
configurable through the sys node.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In sysfs, we use attribute name "cpumap" or "cpus" for cpu mask and
"cpulist" or "cpus_list" for cpu list. For example, in my system,
$ cat /sys/devices/system/node/node0/cpumap
f,ffffffff
$ cat /sys/devices/system/cpu/cpu2/topology/core_cpus
0,00100004
$ cat cat /sys/devices/system/node/node0/cpulist
0-35
$ cat /sys/devices/system/cpu/cpu2/topology/core_cpus_list
2,20
It looks reasonable to use "nodemap" for node mask and "nodelist" for
node list. So, rename the attribute to follow the naming convention.
Link: https://lkml.kernel.org/r/20221020015122.290097-1-ying.huang@intel.com
Fixes: 9832fb8783 ("mm/demotion: expose memory tier details via sysfs")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In current code, dev.max_batch_size and wq.max_batch_size attributes in
sysfs are exposed to user to show or update the values.
>From Intel IAA spec [1], Intel IAA does not support batch processing. So
these sysfs attributes should not be supported on IAA device.
Fix this issue by making the attributes of max_batch_size invisible in
sysfs through is_visible() filter when the device is IAA.
Add description in the ABI documentation to mention that the attributes
are not visible when the device does not support batch.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: e7184b159d ("dmaengine: idxd: add support for configurable max wq batch size")
Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
- Fixed review comments (Anshuman)
- In hwm_power1_max_interval_store() get PKG_MAX_WIN from
pkg_power_sku when it is valid (Ashutosh)
- KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
is valid the field PKG_WIN_MAX is not populated. So it is
decided to stick to default value of PKG_WIN_MAX (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
Fixed variable types in hwm_power1_max_interval_store (Andi)
Documented PKG_MAX_WIN_DEFAULT (Andi)
Removed else in hwm_attributes_visible (Andi)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-7-ashutosh.dixit@intel.com
Use i915 HWMON to display device level energy input.
v2: Updated the date and kernel version in feature description
v3:
- Cleaned up hwm_energy function and removed unused function
i915_hwmon_energy_status_get (Ashutosh)
v4: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: Change contact to intel-gfx (Rodrigo)
Change return type of hwm_energy to void (Andi)
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-5-ashutosh.dixit@intel.com
Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting.
v2:
- Fix review comments (Ashutosh)
- Do not restore power1_max upon module unload/load sequence
because on production systems modules are always loaded
and not unloaded/reloaded (Ashutosh)
- Fix review comments (Jani)
- Remove endianness conversion (Ashutosh)
v3: Add power1_rated_max (Ashutosh)
v4:
- Use macro HWMON_CHANNEL_INFO to define power channel (Guenter)
- Update the date and kernel version in Documentation (Badal)
v5: Use hwm_ prefix for static functions (Ashutosh)
v6: Fix review comments (Ashutosh)
v7:
- Define PCU_PACKAGE_POWER_SKU for DG1,DG2 and move
PKG_PKG_TDP to intel_mchbar_regs.h (Anshuman)
- KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v8: Change contact to intel-gfx (Rodrigo)
Minor change to val_sku_unit init (Andi)
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-4-ashutosh.dixit@intel.com
Use i915 HWMON subsystem to display current input voltage.
v2:
- Updated date and kernel version in feature description
- Fixed review comments (Ashutosh)
v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter)
v4:
- Fixed review comments (Ashutosh)
- Use hwm_ prefix for static functions (Ashutosh)
v5: Added unit of voltage as millivolts (Ashutosh)
v6: KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v7: Change contact to intel-gfx (Rodrigo)
GEN12_RPSTAT1 is available for all Gen12+ (Andi)
Added Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
to MAINTAINERS
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013154526.2105579-3-ashutosh.dixit@intel.com
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines.
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available. (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported.
(Abhishek Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent. (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring. (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver.
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver. (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same.
(Jason Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to
exist with NULL iommu_group pointer to support existing userspace
use cases of holding the group file open. (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups. (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources. (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core. (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that
fall out from previous refactoring. (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper.
(Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=Z8+P
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
-----BEGIN PGP SIGNATURE-----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=pOqY
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better.
- Revert to a BAR assignment inherited from firmware only when the
address is actually reachable via any upstream bridges, which fixes
some cases where firmware doesn't configure all devices.
- Add a sysfs interface to resize BARs so this can be done before
assigning devices to a VM through VFIO.
Power management:
- Disable Precision Time Management for all devices on suspend to
enable lower-power PM state. We previously did this just for Root
Ports, which isn't enough because downstream devices can still
generate PTM messages, which cause errors if it's disabled in the
Root Port.
- Save and restore the ASPM L1 PM Substates configuration for
suspend/ resume. Previously this configuration was lost, so L1.x
states likely stopped working after resume.
- Check whether the L1 PM Substates Capability exists. If it didn't
exist, we previously read junk and tried to configure L1 Substates
based on that.
- Fix the LTR_L1.2_THRESHOLD computation, which previously set a
threshold for entering L1.2 that was too low in some cases.
- Reduce the delay after transitions to or from D3cold by using
usleep_range() rather than msleep(), which often slept for ~19ms
instead of the 10ms normally required. The spec says 10ms is
enough, but it's possible we could trip over devices that need a
little more.
Error handling:
- Work around a BIOS bug that caused Intel Root Ports to advertise a
Root Port Programmed I/O (RP PIO) log size of zero, which caused
annoying warnings and prevented the kernel from dumping log
registers for DPC errors.
Qualcomm PCIe controller driver:
- Add support for SC8280XP and SA8540P host controllers and SM8450
endpoint controller.
- Disable Master AXI clock on endpoint controllers to save power when
link is idle or in L1.x.
- Expose link state transition counts via debugfs to help debug
issues with low-power states.
- Add auto-loading module support.
Synopsys DesignWare PCIe controller driver:
- Remove a dependency on ZONE_DMA32 by allocating the MSI target page
differently. There's more work to do related to eDMA controllers,
so it's not completely settled"
* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: Expose PCIe Resizable BAR support via sysfs
PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
PCI/ASPM: Ignore L1 PM Substates if device lacks capability
PCI/ASPM: Factor out L1 PM Substates configuration
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Refactor L1 PM Substates Control Register programming
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
...
This round looks fairly small comparing to the previous updates which includes
mostly minor bug fixes. Nevertheless, as we've still interested in improving
the stability, Chao added some debugging methods to diagnoze subtle runtime
inconsistency problem.
Enhancement
- store all the corruption or failure reasons in superblock
- detect meta inode, summary info, and block address inconsistency
- increase the limit for reserve_root for low-end devices
- add the number of compressed IO in iostat
Bug fix
- DIO write fix for zoned devices
- do out-of-place writes for cold files
- fix some stat updates (FS_CP_DATA_IO, dirty page count)
- fix race condition on setting FI_NO_EXTENT flag
- fix data races when freezing super
- fix wrong continue condition check in GC
- do not allow ATGC for LFS mode
In addition, there're some code enhancement and clean-ups as usual.
-----BEGIN PGP SIGNATURE-----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=aZ9y
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This round looks fairly small comparing to the previous updates and
includes mostly minor bug fixes. Nevertheless, as we've still
interested in improving the stability, Chao added some debugging
methods to diagnoze subtle runtime inconsistency problem.
Enhancements:
- store all the corruption or failure reasons in superblock
- detect meta inode, summary info, and block address inconsistency
- increase the limit for reserve_root for low-end devices
- add the number of compressed IO in iostat
Bug fixes:
- DIO write fix for zoned devices
- do out-of-place writes for cold files
- fix some stat updates (FS_CP_DATA_IO, dirty page count)
- fix race condition on setting FI_NO_EXTENT flag
- fix data races when freezing super
- fix wrong continue condition check in GC
- do not allow ATGC for LFS mode
In addition, there're some code enhancement and clean-ups as usual"
* tag 'f2fs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
f2fs: change to use atomic_t type form sbi.atomic_files
f2fs: account swapfile inodes
f2fs: allow direct read for zoned device
f2fs: support recording errors into superblock
f2fs: support recording stop_checkpoint reason into super_block
f2fs: remove the unnecessary check in f2fs_xattr_fiemap
f2fs: introduce cp_status sysfs entry
f2fs: fix to detect corrupted meta ino
f2fs: fix to account FS_CP_DATA_IO correctly
f2fs: code clean and fix a type error
f2fs: add "c_len" into trace_f2fs_update_extent_tree_range for compressed file
f2fs: fix to do sanity check on summary info
f2fs: port to vfs{g,u}id_t and associated helpers
f2fs: fix to do sanity check on destination blkaddr during recovery
f2fs: let FI_OPU_WRITE override FADVISE_COLD_BIT
f2fs: fix race condition on setting FI_NO_EXTENT flag
f2fs: remove redundant check in f2fs_sanity_check_cluster
f2fs: add static init_idisk_time function to reduce the code
f2fs: fix typo
f2fs: fix wrong dirty page count when race between mmap and fallocate.
...
linux-next for a couple of months without, to my knowledge, any negative
reports (or any positive ones, come to that).
- Also the Maple Tree from Liam R. Howlett. An overlapping range-based
tree for vmas. It it apparently slight more efficient in its own right,
but is mainly targeted at enabling work to reduce mmap_lock contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
(https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
This has yet to be addressed due to Liam's unfortunately timed
vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down to
the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
=xfWx
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
-----BEGIN PGP SIGNATURE-----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=+qS1
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Fix race between fork and livepatch transition revert
- Add sysfs entry that shows "patched" state for each object (module)
that can be livepatched by the given livepatch
- Some clean up
* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add sysfs test
livepatch: add sysfs entry "patched" for each klp_object
selftests/livepatch: normalize sysctl error message
livepatch: Add a missing newline character in klp_module_coming()
livepatch: fix race between fork and KLP transition
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
Nothing major in here, lots of little things with new devices supported
and updates for a few drivers. Highlights include:
- thunderbolt/USB4 devices supported a bit better than before,
and some new ids to enable new hardware devices
- USB gadget uvc updates for newer video formats and better v4l
integration (the v4l portions were acked by those maintainers)
- typec updates for tiny issues and more typec drivers for new
chips.
- xhci tiny updates for minor issues
- big usb-serial ftdi_sio driver update to handle new devices
better
- lots of tiny dwc3 fixes and updates for the IP block that is
showing up everywhere these days
- dts updates for new devices being supported
- other tiny janitorial and cleanups fixes for lots of different
USB drivers. Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BN9g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljdgCdH4Fev4Nvf2Nokfv0q0krcRB3YpUAn1aZfpb/
EbgxsxhPnTJg+mmXyLms
=IxUy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
Nothing major in here, lots of little things with new devices
supported and updates for a few drivers. Highlights include:
- thunderbolt/USB4 devices supported a bit better than before, and
some new ids to enable new hardware devices
- USB gadget uvc updates for newer video formats and better v4l
integration (the v4l portions were acked by those maintainers)
- typec updates for tiny issues and more typec drivers for new chips.
- xhci tiny updates for minor issues
- big usb-serial ftdi_sio driver update to handle new devices better
- lots of tiny dwc3 fixes and updates for the IP block that is
showing up everywhere these days
- dts updates for new devices being supported
- other tiny janitorial and cleanups fixes for lots of different USB
drivers. Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: gadget: uvc: don't put item still in use
usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
usb: host: ehci-exynos: switch to using gpiod API
Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
dt-bindings: usb: Convert FOTG210 to dt schema
usb: mtu3: fix failed runtime suspend in host only mode
USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
usb: typec: Replace custom implementation of device_match_fwnode()
usb: typec: ucsi: Don't warn on probe deferral
usb: add quirks for Lenovo OneLink+ Dock
MAINTAINERS: switch dwc3 to Thinh
usb: idmouse: fix an uninit-value in idmouse_open
USB: PHY: JZ4770: Switch to use dev_err_probe() helper
usb: phy: generic: Switch to use dev_err_probe() helper
usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
usb: cdns3: remove dead code
usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
usb: musb: sunxi: Switch to use dev_err_probe() helper
...
New Support:
- AngeloGioacchino Del Regno added support for MT6795 SoC dma controller
- Christian Marangi updated qcom-adm controller binding to yaml
- Geert Uytterhoeven added yaml binding for Renesas r8a779g0 dma controller
- Luca Weiss added support for Qualcomm SM6350 GPI dma controller
Updates:
- Amelie Delaunay provided STM32 DMA-MDMA chaining support
- Andy Shevchenko updated hsu driver to use managed resources
- Dave Jiang & Jerry Snitselaar provided usual round of idxd driver updates
- Janne Grunau & Martin Povišer updated apple dma driver for iommu and pd
properties and removed use of devres for irqs
- Swati Agarwal added device_synchronize support for Xilinx zynqmp driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmNAHYQACgkQfBQHDyUj
g0fEOw/8C2HtDZmO2JDD17k+oSidFwDk0a9D2a4Rd5FKmh1mazCxMkHbDf0r0FOe
Ejgmsi79ScgE1t3SVo+VNHg1au2svxL9Gp3Fpgd26w1MgNjE8ePYpwdubRJgv6/9
S8vNEfU3OVzSKRIZk7H0ti7uT/mhQdBibayDWwLLT72Q0eBy0K4Vu+I4n8x/PQ/Y
eLUgMyZ3ZZl45KWztqOfX99lTAezV7ATY9uQsDJ+OgSz6C3Au15cQvrU2YjdjbFe
MYvZYJCQD9rrcY3v3wnNt7rwH4TUom8UKaOM7v4suSkmlGsf1MTC9Utzu036u9r8
xv8sPlozxnnoL+IjugfiWtpq04jHz2h4CDCpXHg1EMKCACIQfkDiUiZbVwpNGoLW
rg2Of5XkShhzbSHf5SGyvWl9sjNR88flih0itPsMQ52Hk4ypUa6OUJ1XP2yuOW5I
dUQS8p0Mv87UWDpywCGjHsf5106RhbmlyYTEBfMS1q13qGXv2rtIigYpLpfmyYyn
xsHF1BE/M/Z7mRNNOc+wg7UGeDi8Dl3geir6xQ7atzHNrWXRqE45l50jCHolLKPe
KwevD0GF7lacTKZo/MIQUbZOIrCfqM+BG54Bzz1XFGfcYmyY4j5jxd1wEnrFYG8R
Adgz76bNKdKAPZexhMA4WHeao6/B3CouoiQQtYuTgXkSnlwkg50=
=zRon
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New Support:
- MT6795 SoC dma controller (AngeloGioacchino Del Regno)
- qcom-adm controller yaml binding (Christian Marangi)
- Renesas r8a779g0 dma controller yaml binding (Geert Uytterhoeven)
- Qualcomm SM6350 GPI dma controller (Luca Weiss)
Updates:
- STM32 DMA-MDMA chaining support (Amelie Delaunay)
- make hsu driver use managed resources (Andy Shevchenko)
- the usual round of idxd driver updates (Dave Jiang & Jerry
Snitselaar)
- apple dma driver iommu and pd properties and remove use
of devres for irqs (Janne Grunau & Martin Povišer)
- device_synchronize support for Xilinx zynqmp driver (Swati
Agarwal)"
* tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
dmaengine: ioat: remove unused declarations in dma.h
dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requested
dmaengine: zynqmp_dma: Add device_synchronize support
dt-bindings: dma: add additional pbus reset to qcom,adm
dt-bindings: dma: rework qcom,adm Documentation to yaml schema
dt-bindings: dma: apple,admac: Add iommus and power-domains properties
dmaengine: dw-edma: Remove runtime PM support
dmaengine: idxd: add configuration for concurrent batch descriptor processing
dmaengine: idxd: add configuration for concurrent work descriptor processing
dmaengine: idxd: add WQ operation cap restriction support
dmanegine: idxd: reformat opcap output to match bitmap_parse() input
dmaengine: idxd: convert ats_dis to a wq flag
dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg
dmaengine: qcom-adm: fix wrong sizeof config in slave_config
dmaengine: ti: k3-psil: add additional TX threads for j721e
dmaengine: ti: k3-psil: add additional TX threads for j7200
dmaengine: apple-admac: Trigger shared reset
dmaengine: apple-admac: Do not use devres for IRQs
dmaengine: ti: edma: Remove some unused functions
...
Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target); the biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so. Beyond the usual bug fixing and
security class reworks, there aren't a huge number of core changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY0B74yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishW2NAP9CPp2R
7NRmSyxcyVYvtCNUW3WxXh65Gn+KgArmg8XucgEAhUBX1fSjOzpERWEU+UaXitbE
Rb+FbjxSc5YxR+nJ/Qc=
=0Wlp
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
mpt3sas, target). The biggest change (from my biased viewpoint) being
that the mpi3mr now attached to the SAS transport class, making it the
first fusion type device to do so.
Beyond the usual bug fixing and security class reworks, there aren't a
huge number of core changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
scsi: mpi3mr: Remove unnecessary cast
scsi: stex: Properly zero out the passthrough command structure
scsi: mpi3mr: Update driver version to 8.2.0.3.0
scsi: mpi3mr: Fix scheduling while atomic type bug
scsi: mpi3mr: Scan the devices during resume time
scsi: mpi3mr: Free enclosure objects during driver unload
scsi: mpi3mr: Handle 0xF003 Fault Code
scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
scsi: mpi3mr: Support new power management framework
scsi: mpi3mr: Update mpi3 header files
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
scsi: core: Add I/O timeout count for SCSI device
scsi: qedf: Populate sysfs attributes for vport
scsi: pm8001: Replace one-element array with flexible-array member
scsi: 3w-xxxx: Replace one-element array with flexible-array member
scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
...
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----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=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
Highlights:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we only
register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change disable_backlight_sysfs_if quirks to acpi_backlight=native
- s2idle: Add a new ->check() callback for platform_s2idle_ops
- video: Fix indentation of video_detect_dmi_table[] entries
- video: Drop NL5x?U, PF4NU1F and PF5?U?? acpi_backlight=native quirks
- video: Drop "Samsung X360" acpi_backlight=native quirk
- video: Remove acpi_video_set_dmi_backlight_type()
- video: Add Apple GMUX brightness control detection
- video: Add Nvidia WMI EC brightness control detection (v3)
- video: Refactor acpi_video_get_backlight_type() a bit
- video: Remove code to unregister acpi_video backlight when a native backlight registers
- video: Make backlight class device registration a separate step (v2)
- video: Simplify acpi_video_unregister_backlight()
- video: Remove acpi_video_bus from list before tearing it down
- video: Drop backlight_device_get_by_type() call from acpi_video_get_backlight_type()
- video: Add acpi_video_backlight_use_native() helper
acer-wmi:
- Move backlight DMI quirks to acpi/video_detect.c
- Acer Aspire One AOD270/Packard Bell Dot keymap fixes
apple-gmux:
- Stop calling acpi/video.h functions
asus-wmi:
- Expand support of GPU fan to read RPM and label
- Make kbd_rgb_mode_groups static
- Move acpi_backlight=native quirks to ACPI video_detect.c
- Move acpi_backlight=vendor quirks to ACPI video_detect.c
- Drop DMI chassis-type check from backlight handling
- Increase FAN_CURVE_BUF_LEN to 32
- Fix the name of the mic-mute LED classdev
- Implement TUF laptop keyboard power states
- Implement TUF laptop keyboard LED modes
- Support the GPU fan on TUF laptops
- Modify behaviour of Fn+F5 fan key
- Update tablet_mode_sw module-param help text
- Simplify tablet-mode-switch handling
- Simplify tablet-mode-switch probing
- Add support for ROG X13 tablet mode
- Adjust tablet/lidflip handling to use enum
- Support the hardware GPU MUX on some laptops
- Simplify some of the *_check_present() helpers
- Refactor panel_od attribute
- Refactor egpu_enable attribute
- Refactor disable_gpu attribute
- Document the panel_od sysfs attribute
- Document the egpu_enable sysfs attribute
- Document the dgpu_disable sysfs attribute
- Use kobj_to_dev()
- Convert all attr-show to use sysfs_emit
compal-laptop:
- Get rid of a few forward declarations
dell-privacy:
- convert to use dev_groups
dell-smbios-base:
- Use sysfs_emit()
dell-wmi:
- Add WMI event 0x0012 0x0003 to the list
docs:
- ABI: charge_control_end_threshold may not support all values
drivers/platform:
- toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models
drm/amdgpu:
- Register ACPI video backlight when skipping amdgpu backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/i915:
- Call acpi_video_register_backlight() (v3)
- Don't register backlight when another backlight should be used (v2)
drm/nouveau:
- Register ACPI video backlight when nv_backlight registration fails (v2)
- Don't register backlight when another backlight should be used (v2)
drm/radeon:
- Register ACPI video backlight when skipping radeon backlight registration
- Don't register backlight when another backlight should be used (v3)
drm/todo:
- Add entry about dealing with brightness control on devices with > 1 panel
gpio-f7188x:
- use unique labels for banks/chips
- Add GPIO support for Nuvoton NCT6116
- add a prefix to macros to keep gpio namespace clean
- switch over to using pr_fmt
hp-wmi:
- Support touchpad on/off
- Setting thermal profile fails with 0x06
int3472/discrete:
- Drop a forward declaration
intel-uncore-freq:
- Use sysfs_emit() to instead of scnprintf()
intel_cht_int33fe:
- Fix comment according to the code flow
leds:
- simatic-ipc-leds-gpio: Make simatic_ipc_led_gpio_table static
- simatic-ipc-leds-gpio: add new model 227G
move from strlcpy with unused retval to strscpy:
- move from strlcpy with unused retval to strscpy
msi-laptop:
- Change DMI match / alias strings to fix module autoloading
- Add msi_scm_disable_hw_fn_handling() helper
- Add msi_scm_model_exit() helper
- Fix resource cleanup
- Simplify ec_delay handling
- Fix old-ec check for backlight registering
- Drop MSI_DRIVER_VERSION
- Use MODULE_DEVICE_TABLE()
nvidia-wmi-ec-backlight:
- Use acpi_video_get_backlight_type()
- Move fw interface definitions to a header (v2)
p2sb:
- Fix UAF when caller uses resource name
platform/mellanox:
- mlxreg-lc: Make error handling flow consistent
- Remove redundant 'NULL' check
- Remove unnecessary code
- mlxreg-lc: Fix locking issue
- mlxreg-lc: Fix coverity warning
platform/surface:
- Split memcpy() of struct ssam_event flexible array
- aggregator_registry: Add HID devices for sensors and UCSI client to SP8
- aggregator_registry: Rename HID device nodes based on new findings
- aggregator_registry: Rename HID device nodes based on their function
- aggregator_registry: Add support for Surface Laptop Go 2
platform/x86:
- use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd:
- pmc: Dump idle mask during "check" stage instead
- pmc: remove CONFIG_DEBUG_FS checks
- pmc: Fix build without debugfs
- pmc: Add sysfs files for SMU
- pmc: Add an extra STB message for checking s2idle entry
- pmc: Always write to the STB
- pmc: Add defines for STB events
platform/x86/amd/pmf:
- Remove unused power_delta instances
- install notify handler after acpi init
- Add sysfs to toggle CnQF
- Add support for CnQF
- Fix clang unused variable warning
- Fix undefined reference to platform_profile
- Force load driver on older supported platforms
- Handle AMT and CQL events for Auto mode
- Add support for Auto mode feature
- Get performance metrics from PMFW
- Add fan control support
- Add heartbeat signal support
- Add debugfs information
- Add support SPS PMF feature
- Add support for PMF APCI layer
- Add support for PMF core layer
- Add ABI doc for AMD PMF
- Add AMD PMF driver entry
platform/x86/intel/wmi:
- thunderbolt: Use dev_groups callback
pmc_atom:
- Amend comment style and grammar
- Make terminator entry uniform
- Improve quirk message to be less cryptic
- Fix SLP_TYPx bitfield mask
samsung-laptop:
- Move acpi_backlight=[vendor|native] quirks to ACPI video_detect.c
simatic-ipc:
- add new model 427G
- enable watchdog for 227G
thinkpad_acpi:
- Explicitly set to balanced mode on startup
tools/power/x86/intel-speed-select:
- Release v1.13
- Optimize CPU initialization
- Utilize cpu_map to get physical id
- Remove unused struct clos_config fields
- Enforce isst_id value
- Do not export get_physical_id
- Introduce is_cpu_in_power_domain helper
- Cleanup get_physical_id usage
- Convert more function to use isst_id
- Add pkg and die in isst_id
- Introduce struct isst_id
- Remove unused core_mask array
- Remove dead code
- Fix cpu count for TDP level display
toshiba_acpi:
- change turn_on_panel_on_resume to static
- Remove duplicate include
- Set correct parent for input device.
- Add fan RPM reading (hwmon interface)
- Add fan RPM reading (internals)
- Stop using acpi_video_set_dmi_backlight_type()
- Fix ECO LED control on Toshiba Z830
- Battery charge mode in toshiba_acpi (internals)
- Battery charge mode in toshiba_acpi (sysfs)
wmi:
- Drop forward declaration of static functions
- Allow duplicate GUIDs for drivers that use struct wmi_driver
x86-android-tablets:
- Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmM9eLgUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zIzAf+JG058wucK0Zsnu4POzGp+uHjnWuu
AJUmTeRvCD7MidwIv5PiwEtTucQ8OuXYR+tPc8LIwCVZtc05FBmh7Y8le/CX0SS6
n9EZIvCk3Owosti5w2TPnCK920kh+Wfxl/fmfDbpi6+lpAL8r+F/mZEGKGFdZpWu
Q+yM/eyxwPH8q8gjrXOUC7rN43aYeO3OCpNG3GYkQ/2S5qrjuz39dXhNVzdSsxm7
aYOqJRNjZQEjQ3kJcp65kC6oWp3UaI1zdpGwhBG/SY8BCtCYZzlRy7gN2FCJfAa/
EyYayOvdy0zNwewbIYzck4W80hUDtfidgZgZ9crQscO/JjbGi6LhveD4YA==
=afGw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD Platform Management Framework (PMF) driver with AMT and QnQF
support
- AMD PMC: Improved logging for debugging s2idle issues
- Big refactor of the ACPI/x86 backlight handling, ensuring that we
only register 1 /sys/class/backlight device per LCD panel
- Microsoft Surface:
- Surface Laptop Go 2 support
- Surface Pro 8 HID sensor support
- Asus WMI:
- Lots of cleanups
- Support for TUF RGB keyboard backlight control
- Add support for ROG X13 tablet mode
- Siemens Simatic: IPC227G and IPC427G support
- Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support
- tools/power/x86/intel-speed-select: Various improvements
- Various cleanups
- Various small bugfixes
* tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits)
platform/x86: use PLATFORM_DEVID_NONE instead of -1
platform/x86/amd: pmc: Dump idle mask during "check" stage instead
platform/x86/intel/wmi: thunderbolt: Use dev_groups callback
platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks
platform/surface: Split memcpy() of struct ssam_event flexible array
platform/x86: compal-laptop: Get rid of a few forward declarations
platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf()
platform/x86: dell-smbios-base: Use sysfs_emit()
platform/x86/amd/pmf: Remove unused power_delta instances
platform/x86/amd/pmf: install notify handler after acpi init
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF
platform/x86/amd/pmf: Add sysfs to toggle CnQF
platform/x86/amd/pmf: Add support for CnQF
platform/x86/amd: pmc: Fix build without debugfs
platform/x86: hp-wmi: Support touchpad on/off
platform/x86: int3472/discrete: Drop a forward declaration
platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static
platform/x86: wmi: Drop forward declaration of static functions
platform/x86: toshiba_acpi: Remove duplicate include
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
...
Add a simple sysfs interface to Resizable BAR support, largely for the
purposes of assigning such devices to a VM through VFIO. Resizable BARs
present a difficult feature to expose to a VM through emulation, as
resizing a BAR is done on the host. It can fail, and often does, but we
have no means via emulation of a PCIe REBAR capability to handle the error
cases.
A vfio-pci specific ioctl interface is also cumbersome as there are often
multiple devices within the same bridge aperture and handling them is a
challenge. In the interface proposed here, expanding a BAR potentially
requires such devices to be soft-removed during the resize operation and
rescanned after, in order for all the necessary resources to be released.
A pci-sysfs interface is also more universal than a vfio specific
interface.
Please see the ABI documentation update for usage.
Link: https://lore.kernel.org/r/166336088796.3597940.14973499936692558556.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
cros_ec_proto:
* Fix protocol failure if EC firmware jumps to RO part.
cros_typec_switch:
* Add USB Type-C switch driver for mode switches and retimers.
* Integrate to EC for retimers, status update, and mode switches.
* Clean-ups.
cros_ec_typec:
* Clean-ups.
* Use partner PDOs to register USB PD capabilities.
chromeos_laptop:
* Fix a double-free.
cros_ec_chardev:
* Check data length from userland to avoid a memory corruption.
cros_ec:
* Expose suspend_timeout_ms in debugfs.
* Notify the PM about wake events during resume.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCYzut7RMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz011UA/ioEJfKhK0HT4uwe6TfW6hAtmnk4ZipR
Q7dTPH272723AP47SkcfYJK/GxBV9GIxyqOqfnhbFaxWu6fid2a4D8UCAw==
=/Xux
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Fix protocol failure if EC firmware jumps to RO part
cros_typec_switch:
- Add USB Type-C switch driver for mode switches and retimers
- Integrate to EC for retimers, status update, and mode switches
- Clean-ups
cros_ec_typec:
- Clean-ups
- Use partner PDOs to register USB PD capabilities
chromeos_laptop:
- Fix a double-free
cros_ec_chardev:
- Check data length from userland to avoid a memory corruption
cros_ec:
- Expose suspend_timeout_ms in debugfs
- Notify the PM about wake events during resume"
* tag 'tag-chrome-platform-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/chrome: cros_ec_typec: Register partner PDOs
platform/chrome: cros_typec_switch: Inline DRV_NAME
platform/chrome: cros_typec_switch: Use PTR_ERR_OR_ZERO() to simplify
platform/chrome: cros_typec_switch: Remove impossible condition
platform/chrome: cros_typec_switch: Add missing newline on printk
platform/chrome: cros_ec_typec: Correct alt mode index
platform/chrome: cros_ec_typec: Add bit offset for DP VDO
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs
platform/chrome: fix memory corruption in ioctl
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
This patch adds a new sysfs entry named cp_status, it can output
checkpoint flags in real time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The hope
is that the new organization will be a friendlier starting point for
both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmM7BksPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y8i4H/ihd1ppgVYy1yvFL3L1KkcsNyt3bFUa6hide
qmkhqpzjsNmbTOaW19Y6epCzRzvxG7M9hzztIewt1BhRDvgRC8GaQNNRw/IBs0B6
kprisINC2/ap4JjCroYWepfd+H8NSiVxqtd8hVSMWDSh2cK9vw0qVqQq59I+gght
64pA4F2nPO6bamZzAELTdWRj0ITL1A/V/jYj+T074B094arc4HyekIQ5Jn9GTCmt
jFBH9yxAb3l8K7KgzH7FgxKY/an0HxKDh4Cnx2Jv+dcocgCwy1iXCuyEZbFd9GEB
UyhPcCyrIe/I2B9U9LrqLvXA8LW7jwE+MZMqZpaRkxcIdE2gEFQ=
=M7tR
-----END PGP SIGNATURE-----
Merge tag 'docs-6.1' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There's not a huge amount of activity in the docs tree this time
around, but a few significant changes even so:
- A complete rewriting of the top-level index.rst file, which mostly
reflects itself in a redone top page in the HTML-rendered docs. The
hope is that the new organization will be a friendlier starting
point for both users and developers.
- Some math-rendering improvements.
- A coding-style.rst update on the use of BUG() and WARN()
- A big maintainer-PHP guide update.
- Some code-of-conduct updates
- More Chinese translation work
Plus the usual pile of typo fixes, corrections, and updates"
* tag 'docs-6.1' of git://git.lwn.net/linux: (66 commits)
checkpatch: warn on usage of VM_BUG_ON() and other BUG variants
coding-style.rst: document BUG() and WARN() rules ("do not crash the kernel")
Documentation: devres: add missing IO helper
Documentation: devres: update IRQ helper
Documentation/mm: modify page_referenced to folio_referenced
Documentation/CoC: Reflect current CoC interpretation and practices
docs/doc-guide: Add documentation on SPHINX_IMGMATH
docs: process/5.Posting.rst: clarify use of Reported-by: tag
docs, kprobes: Fix the wrong location of Kprobes
docs: add a man-pages link to the front page
docs: put atomic*.txt and memory-barriers.txt into the core-api book
docs: move asm-annotations.rst into core-api
docs: remove some index.rst cruft
docs: reconfigure the HTML left column
docs: Rewrite the front page
docs: promote the title of process/index.rst
Documentation: devres: add missing SPI helper
Documentation: devres: add missing PINCTRL helpers
docs: hugetlbpage.rst: fix a typo of hugepage size
docs/zh_CN: Add new translation of admin-guide/bootconfig.rst
...
This includes following Thunderbolt/USB4 changes for the v6.1 merge
window:
- Support for Intel Meteor Lake integrated Thunderbolt/USB4 controller
- Support for ASMedia USB4 controller NVM firmware upgrade
- Receiver lane margining support
- Few fixes and cleanups.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=67d1
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
"thunderbolt: Changes for v6.1 merge window
This includes following Thunderbolt/USB4 changes for the v6.1 merge
window:
- Support for Intel Meteor Lake integrated Thunderbolt/USB4 controller
- Support for ASMedia USB4 controller NVM firmware upgrade
- Receiver lane margining support
- Few fixes and cleanups.
All these have been in linux-next with no reported issues."
* tag 'thunderbolt-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Explicitly enable lane adapter hotplug events at startup
thunderbolt: Use dev_err_probe()
thunderbolt: Convert to use sysfs_emit()/sysfs_emit_at() APIs
thunderbolt: Fix spelling mistake "simultaneusly" -> "simultaneously"
thunderbolt: debugfs: Fix spelling mistakes in seq_puts text
thunderbolt: Add support for ASMedia NVM image format
thunderbolt: Move vendor specific NVM handling into nvm.c
thunderbolt: Provide tb_retimer_nvm_read() analogous to tb_switch_nvm_read()
thunderbolt: Rename and make nvm_read() available for other files
thunderbolt: Extend NVM version fields to 32-bits
thunderbolt: Allow NVM upgrade of USB4 host routers
thunderbolt: Add support for receiver lane margining
thunderbolt: Add helper to check if CL states are enabled on port
thunderbolt: Pass CL state bitmask to tb_port_clx_supported()
thunderbolt: Move port CL state functions into correct place in switch.c
thunderbolt: Move tb_xdomain_parent() to tb.h
thunderbolt: Add support for Intel Meteor Lake
thunderbolt: Add comment where Thunderbolt 4 PCI IDs start
thunderbolt: Add DP OUT resource when DP tunnel is discovered
Add sysfs knob to allow control of the number of batch descriptors that can
be concurrently processed by an engine in the group as a fraction of the
Maximum Work Descriptors in Progress value specfied in ENGCAP register.
This control knob is part of toggle for QoS control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-6-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs knob to allow control of the number of work descriptors that can
be concurrently processed by an engine in the group as a fraction of the
Maximum Work Descriptors in Progress value specified in ENGCAP register.
This control knob is part of toggle for QoS control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-5-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DSA 2.0 add the capability of configuring DMA ops on a per workqueue basis.
This means that certain ops can be disabled by the system administrator for
certain wq. By default, all ops are available. A bitmap is used to store
the ops due to total op size of 256 bits and it is more convenient to use a
range list to specify which bits are enabled.
One of the usage to support this is for VM migration between different
iteration of devices. The newer ops are disabled in order to allow guest to
migrate to a host that only support older ops. Another usage is to
restrict the WQ to certain operations for QoS of performance.
A sysfs of ops_config attribute is added per wq. It is only usable when the
ops_config bit is set under WQ_CAP register. This means that this attribute
will return -EOPNOTSUPP on DSA 1.x devices. The expected input is a range
list for the bits per operation the WQ supports.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220917161222.2835172-4-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Correct all uses of "it's" that are meant to be possessive "its".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220801025207.29971-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add /sys/devices/virtual/memory_tiering/ where all memory tier related
details can be found. All allocated memory tiers will be listed there as
/sys/devices/virtual/memory_tiering/memory_tierN/
The nodes which are part of a specific memory tier can be listed via
/sys/devices/virtual/memory_tiering/memory_tierN/nodes
A directory hierarchy looks like
:/sys/devices/virtual/memory_tiering$ tree memory_tier4/
memory_tier4/
├── nodes
├── subsystem -> ../../../../bus/memory_tiering
└── uevent
:/sys/devices/virtual/memory_tiering$ cat memory_tier4/nodes
0,2
[aneesh.kumar@linux.ibm.com: drop toptier_nodes from sysfs]
Link: https://lkml.kernel.org/r/20220922102201.62168-1-aneesh.kumar@linux.ibm.com
Link: https://lkml.kernel.org/r/20220830081736.119281-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Normal mixed bag of new device support with continuing trend that most new
devices are supported by extending existing drivers - a positive sign perhaps
that device manufacturers have somewhat stabilized their interfaces across
product generations. The BNO055 driver was however a substantial addition
including several additions to the IIO core.
There are a number of significant patch sets under review, so if the 6.0
cycle runs long I may send a 3rd pull request.
New device support
* adi,adxl313
- Support for the ADXL312 and ADXL314 accelerometers.
* bosch,bmp280
- Support for the BMP380 family of pressures sensors.
Included considerable refactoring and modernization of the bmp280
driver.
* bosch,bno055
- New driver for this i2c/serial attached complex IMU.
* lltc,ltc2497
- Support for the LTC2499 16 channel, 24bit ADC.
* st,pressure
- Support for the LPS22DF pressure sensor
* st,lsm6dsx
- Support for the LSM6DSTX (Mainly adding the ID and WAI)
Features
* core - to support the bosch,bno055 requirements
- Support for linear acceleration channel type (effect of gravity removed)
- Pitch, yaw and roll modifiers for angle channels.
- Standard serialnumber attribute documentation.
- Binary attributes - to allow for calibration save and restore.
* adi,ad7923
- Support extended range (wider supported input voltage range).
* bosch,bmp280
- Add filter controls for some supported parts.
* microchip,mcp3911
- Buffered capture support for this ADC.
- Data ready interrupt support, including hiz control for line.
- Oversampling ratio support.
* st,stm32-adc
- Support ID registers on parts where they are present, providing
discoverability of some features.
Fixes - late breaking fixes that I judged could wait for the merge window.
* adi,ad5593r
- Add a missing STOP condition between address write and data read.
- Check for related i2c functionality.
* adi,ad7923
- Fix shift reporting for some variants supported by the driver.
* infinion,dps310
- Work around a hardware issue where a chip can hang by adding a
timeout and reset path.
Cleanups
* Continuing work to switch to new pm macros.
* MAINTAINERS
- Drop duplication of wild card covered entry in ADI block and
add missing entries to cover ltc294x binding files.
* bosch,bma400
- Fix trivial smatch warning.
* bosch,bmp280
- Fix broken links to datasheets
* lltc,ltc2497
- Fix missing entry for ltc2499
* mexelis,mlx90614
- Switch to get_avail() callback for _available attributes.
* microchip,mcp3911
- Move to devm_ resource management for all elements of probe()
-----BEGIN PGP SIGNATURE-----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=q/TD
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 6.1 cycle.
Normal mixed bag of new device support with continuing trend that most new
devices are supported by extending existing drivers - a positive sign perhaps
that device manufacturers have somewhat stabilized their interfaces across
product generations. The BNO055 driver was however a substantial addition
including several additions to the IIO core.
There are a number of significant patch sets under review, so if the 6.0
cycle runs long I may send a 3rd pull request.
New device support
* adi,adxl313
- Support for the ADXL312 and ADXL314 accelerometers.
* bosch,bmp280
- Support for the BMP380 family of pressures sensors.
Included considerable refactoring and modernization of the bmp280
driver.
* bosch,bno055
- New driver for this i2c/serial attached complex IMU.
* lltc,ltc2497
- Support for the LTC2499 16 channel, 24bit ADC.
* st,pressure
- Support for the LPS22DF pressure sensor
* st,lsm6dsx
- Support for the LSM6DSTX (Mainly adding the ID and WAI)
Features
* core - to support the bosch,bno055 requirements
- Support for linear acceleration channel type (effect of gravity removed)
- Pitch, yaw and roll modifiers for angle channels.
- Standard serialnumber attribute documentation.
- Binary attributes - to allow for calibration save and restore.
* adi,ad7923
- Support extended range (wider supported input voltage range).
* bosch,bmp280
- Add filter controls for some supported parts.
* microchip,mcp3911
- Buffered capture support for this ADC.
- Data ready interrupt support, including hiz control for line.
- Oversampling ratio support.
* st,stm32-adc
- Support ID registers on parts where they are present, providing
discoverability of some features.
Fixes - late breaking fixes that I judged could wait for the merge window.
* adi,ad5593r
- Add a missing STOP condition between address write and data read.
- Check for related i2c functionality.
* adi,ad7923
- Fix shift reporting for some variants supported by the driver.
* infinion,dps310
- Work around a hardware issue where a chip can hang by adding a
timeout and reset path.
Cleanups
* Continuing work to switch to new pm macros.
* MAINTAINERS
- Drop duplication of wild card covered entry in ADI block and
add missing entries to cover ltc294x binding files.
* bosch,bma400
- Fix trivial smatch warning.
* bosch,bmp280
- Fix broken links to datasheets
* lltc,ltc2497
- Fix missing entry for ltc2499
* mexelis,mlx90614
- Switch to get_avail() callback for _available attributes.
* microchip,mcp3911
- Move to devm_ resource management for all elements of probe()
* tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (57 commits)
iio: adc: mcp3911: add support for oversampling ratio
dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
iio: adc: mcp3911: add support for interrupts
iio: adc: mcp3911: add support for buffers
iio: adc: mcp3911: use resource-managed version of iio_device_register
iio: accel: bma400: Fix smatch warning based on use of unintialized value.
iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()
iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
docs: iio: add documentation for BNO055 driver
iio: imu: add BNO055 I2C driver
iio: imu: add BNO055 serdev driver
dt-bindings: iio/imu: Add Bosch BNO055
iio: document "serialnumber" sysfs attribute
iio: document bno055 private sysfs attributes
iio: imu: add Bosch Sensortec BNO055 core driver
iio: add support for binary attributes
...
Add per klp_object sysfs entry "patched". It makes it easier to debug
typos in the module name.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
[pmladek@suse.com: Updated kernel version when the sysfs file will be introduced]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220902205208.3117798-2-song@kernel.org
AMD PMF driver provides the flexibility to turn "on" or "off"
CnQF feature (introduced in the earlier patch).
Add corresponding ABI documentation for the new sysfs node and
also update MAINTAINERS file with this new information
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220922131202.56529-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
and replace kref. With it a 'vfio-dev/vfioX' node is created under the
sysfs path of the parent, indicating the device is bound to a vfio
driver, e.g.:
/sys/devices/pci0000\:6f/0000\:6f\:01.0/vfio-dev/vfio0
It is also a preparatory step toward adding cdev for supporting future
device-oriented uAPI.
Add Documentation/ABI/testing/sysfs-devices-vfio-dev.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220921104401.38898-16-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add ABI documentation for the new "serialnumber" sysfs attribute. The
first user is the bno055 IIO driver.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-11-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add ABI documentation for bno055 driver private sysfs attributes.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-10-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce ABI documentation for new modifiers used for reporting rotations
expressed as euler angles (i.e. yaw, pitch, roll).
It looks like we have some unit inconsistency along various IIO modifiers:
it seems that incli is in deg, angl is in radians and rot isn't documented,
but at least the adis16209 driver has rot in deg.
Here we use deg (so angl is the only one using radians).
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-6-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce ABI documentation for new IIO modifiers used for reporting
"linear acceleration" measures.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-3-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Support new notifier event for device state change through eventfd.
- Add uAPI to retrieve device attestation information for Gaudi2.
- Add uAPI to retrieve the h/w status of all h/w blocks.
- Add uAPI to control the running mode of the engine cores in Gaudi2.
- Expose whether the device runs with secured firmware through the INFO ioctl
and sysfs.
- Support trace events in DMA allocations and MMU map/unmap operations.
- Notify firmware when the device was acquired by a user process and when it
was released. This is done as part of the RAS that the f/w performs.
- Multiple bug fixes, refactors and renames.
- Cleanup of error messages, moving some to debug level.
- Enhance log prints in case of h/w error events for Gaudi2.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmMq7cQACgkQZR1NuKta
54CXRAgAwU82gKSHHU9vFp1gavk9tfPl4OHAhPKk1rBDArzCTMZFynAVGdcx1eSX
XmsqKnjTIcP5dx3BYrHuUWdW79neHnoVvGKCg5+Lh0jG9xdKbeWapJZ6O0eWk3Mx
9VmoAQ/VlyizIoaxfNFi2ou5QhC6DL6AY1+2Vd1mMC1ru5L5Jzq/IIFdNENnxoAa
mTGD0P1EapmzztLbuxH7WYuOPBBhfrTuH1FpGo847QhLcSJ+TDYV7CK1y+uhtEZi
isCX2jigqbQ5UwGcesL80nJM1aYyH6AToCSMrmruIDjVbz1QRqW/s6/8hipOoMW6
o7LhHaoOPj20g2fs+R5Jy7ALXDuiOQ==
=TdfZ
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2022-09-21' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
"This tag contains habanalabs driver changes for v6.1:
- Support new notifier event for device state change through eventfd.
- Add uAPI to retrieve device attestation information for Gaudi2.
- Add uAPI to retrieve the h/w status of all h/w blocks.
- Add uAPI to control the running mode of the engine cores in Gaudi2.
- Expose whether the device runs with secured firmware through the INFO ioctl
and sysfs.
- Support trace events in DMA allocations and MMU map/unmap operations.
- Notify firmware when the device was acquired by a user process and when it
was released. This is done as part of the RAS that the f/w performs.
- Multiple bug fixes, refactors and renames.
- Cleanup of error messages, moving some to debug level.
- Enhance log prints in case of h/w error events for Gaudi2."
* tag 'misc-habanalabs-next-2022-09-21' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (68 commits)
habanalabs: eliminate aggregate use warning
habanalabs/gaudi: use 8KB aligned address for TPC kernels
habanalabs: remove some f/w descriptor validations
habanalabs: build ASICs from new to old
habanalabs/gaudi2: allow user to flush PCIE by read
habanalabs: failure to open device due to reset is debug level
habanalabs/gaudi2: Remove unnecessary (void*) conversions
habanalabs/gaudi2: add secured attestation info uapi
habanalabs/gaudi2: add handling to pmmu events in eqe handler
habanalabs/gaudi: change TPC Assert to use TPC DEC instead of QMAN err
habanalabs: rename error info structure
habanalabs/gaudi2: get f/w reset status register dynamically
habanalabs/gaudi2: increase hard-reset sleep time to 2 sec
habanalabs/gaudi2: print RAZWI info upon PCIe access error
habanalabs: MMU invalidation h/w is per device
habanalabs: new notifier events for device state
habanalabs/gaudi2: free event irq if init fails
habanalabs: fix resetting the DRAM BAR
habanalabs: add support for new cpucp return codes
habanalabs/gaudi2: read F/W security indication after hard reset
...
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=rg+8
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
"coresight: Changes for v6.1
Coresight trace subsystem updates for v6.1 includes:
- Support for HiSilicon PTT trace
- Coresight cleanup of sysfs accessor functions, reduced
code size.
- Expose coresight timestamp source for ETMv4+
- DT binding updates to include missing properties
- Minor documentation, Kconfig text fixes.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>"
* tag 'coresight-next-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
hwtracing: hisi_ptt: Fix up for "iommu/dma: Make header private"
MAINTAINERS: Add maintainer for HiSilicon PTT driver
docs: trace: Add HiSilicon PTT device driver documentation
hwtracing: hisi_ptt: Add tune function support for HiSilicon PCIe Tune and Trace device
hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device
iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
coresight: cti-sysfs: Mark coresight_cti_reg_store() as __maybe_unused
coresight: Make new csdev_access offsets unsigned
coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors
coresight: Re-use same function for similar sysfs register accessors
coresight: Simplify sysfs accessors by using csdev_access abstraction
coresight: Remove unused function parameter
coresight: etm4x: docs: Add documentation for 'ts_source' sysfs interface
coresight: etm4x: Expose default timestamp source in sysfs
dt-bindings: arm: coresight-tmc: Add 'iommu' property
dt-bindings: arm: coresight: Add 'power-domains' property
coresight: docs: Fix a broken reference
coresight: trbe: fix Kconfig "its" grammar
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=fUm6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: accel: bma400: Add support for single and double tap events
iio: Add new event type gesture and use direction for single and double tap
iio: Use per-device lockdep class for mlock
iio: adc: add max11205 adc driver
dt-bindings: iio: adc: Add max11205 documentation file
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: adc: tsc2046: silent spi_device_id warning
iio: adc: tsc2046: add vref support
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: light: ltrf216a: Add raw attribute
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
MAINTAINERS: fix Analog Devices forum links
iio/accel: fix repeated words in comments
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
...
The CPU/APU SMU FW version and program is currently discoverable by
turning on dynamic debugging or examining debugfs for the amdgpu
driver. To make this more discoverable, create a dedicated sysfs
file for it that userspace can parse without debugging enabled.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220914141850.259-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In order for the user to know if he is running on a secured device
or not, a sysfs node is added.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some laptops (for example Toshiba Satellite Z830) only supports some fixed
values. Allow for this and document the expected behaviour in such cases.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Link: https://lore.kernel.org/r/20220902180037.1728546-4-lkml@vorpal.se
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Document the introduction and usage of HiSilicon PTT device driver as well
as the sysfs attributes description provided by the driver.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
[Fixed month and kernel version]
Link: https://lore.kernel.org/r/20220816114414.4092-5-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
There are spelling mistakes in the thunderbolt sysfs documentation.
Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Userspace may want to manually control when the data should go into
WriteBooster buffer. The control happens via "wb_on" node, but presently,
there is no simple way to check if WriteBooster is supported and
enabled.
Expose the Write Booster and Clock Scaling capabilities to be able to
determine if the Write Booster is available and if its manual control is
blocked by Clock Scaling mechanism.
Link: https://lore.kernel.org/r/20220829081845.v8.1.Ibf9efc9be50783eeee55befa2270b7d38552354c@changeid
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add new event type for tap called gesture and the direction can be used
to differentiate single and double tap. This may be used by accelerometer
sensors to express single and double tap events. For directional tap,
modifiers like IIO_MOD_(X/Y/Z) can be used along with singletap and
doubletap direction.
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220831063117.4141-2-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We need the USB fixes in here and this resolves the merge issue in:
drivers/usb/dwc3/gadget.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sync sysfs documentation pages to include the new ts_source (timestamp
source) interface.
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220823160650.455823-3-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Support the hardware GPU MUX switch available on some models. This
switch can toggle the MUX between:
- 0, Dedicated mode
- 1, Optimus mode
Optimus mode is the regular iGPU + dGPU available, while dedicated
mode switches the system to have only the dGPU available.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220813092624.6228-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The panel_od attribute was not documented, this adds the
required documentation.
Fixes: ca91ea3477 ("asus-wmi: Add panel overdrive functionality")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-4-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The egpu_enable attribute was not documented, this adds the
required documentation.
Fixes: 382b91db80 ("asus-wmi: Add egpu enable method")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-3-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The dgpu_disable attribute was not documented, this adds the
required documentation.
Fixes: 98829e84dc ("asus-wmi: Add dgpu disable method")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While reporting for the AMD retbleed vulnerability was added in
6b80b59b35 ("x86/bugs: Report AMD retbleed vulnerability")
the new sysfs file was not mentioned so far in the ABI documentation for
sysfs-devices-system-cpu. Fix that.
Fixes: 6b80b59b35 ("x86/bugs: Report AMD retbleed vulnerability")
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220801091529.325327-1-carnil@debian.org
In modern Chromebooks, the embedded controller has a mechanism where
it will watch a hardware-controlled line that toggles in suspend, and
wake the system up if an expected sleep transition didn't occur. This
can be very useful for detecting power management issues where the
system appears to suspend, but doesn't actually reach its lowest
expected power states.
Sometimes it's useful in debug and test scenarios to be able to control
the duration of that timeout, or even disable the EC timeout mechanism
altogether. Add a debugfs control to set the timeout to values other
than the EC-defined default, for more convenient debug and
development iteration.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220822144026.v3.1.Idd188ff3f9caddebc17ac357a13005f93333c21f@changeid
[tzungbi: fix one nit in Documentation/ABI/testing/debugfs-cros-ec.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
There is the following quirk to bypass "WB Flush" in Write Booster.
- UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
If this quirk is not set, there is no knob that can control "WB Flush".
There are three flags that control Write Booster Feature:
1. WB ON/OFF
2. WB Hibern Flush ON/OFF (implicitly)
3. WB Flush ON/OFF (explicit)
The sysfs attribute that controls the WB was implemented. (1)
In the case of "Hibern Flush", it is always good to turn on. Control may
not be required. (2)
Finally, "Flush" may be necessary because the Auto-Hibern8 is not supported
in a specific environment. So the sysfs attribute that controls this is
necessary. (3)
Link: https://lore.kernel.org/r/20220804075354epcms2p8c21c894b4e28840c5fc651875b7f435f@epcms2p8
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the "srpd" and "frequency" sysfs attributes exposed by
the brcmstb_memc driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-3-f.fainelli@gmail.com
The datasheet description of offset calibration is complex, so for that
on just refer the reader to the device datasheet.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220626122938.582107-16-jic23@kernel.org
Address an ABI gap for device where the offset of both lines in a
differential pair may be controlled so as to allow a wider range of
inputs, but without having any direct effect of the differential
measurement.
_offset cannot be used as to remain in line with existing usage,
userspace would be expected to apply it as (_raw + _offset) * _scale
whereas _zeropoint is not. i.e. If we were computing the differential
in software it would be.
((postive_raw + _zeropoint) - (negative_raw + zeropoint) + _offset) * _scale
= ((postive_raw - negative_raw) + _offset) * _scale
= (differential_raw + _offset) * _scale
Similarly calibbias is expected to tweak the measurement seen, not
the adjust the two lines of the differential pair.
Needed for in_capacitanceX-capacitanceY_zeropoint for the
AD7746 CDC driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220626122938.582107-12-jic23@kernel.org
in_ only occurs once in these attributes.
Fixes: 0baf29d658 ("staging:iio:documentation Add abi docs for capacitance adcs.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220626122938.582107-3-jic23@kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYvi0yQAKCRCAXGG7T9hj
vmikAQDWSrcWuxDkGnzut0A1tBQRUCWDMyKPqigWAA5tH2sPgAEAtWfBvT1xyl7T
gZ22I7o21WxxDGyvNUcA65pK7c2cpg8=
=UMbq
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
Similar behavioral change has made on 'blkfront' by commit 74a852479c
("xen-blkfront: add a parameter for disabling of persistent grants").
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous behavior of 'blkfront' can be
restored.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
In some use cases[1], the backend is created while the frontend doesn't
support the persistent grants feature, but later the frontend can be
changed to support the feature and reconnect. In the past, 'blkback'
enabled the persistent grants feature since it unconditionally checked
if frontend supports the persistent grants feature for every connect
('connect_ring()') and decided whether it should use persistent grans or
not.
However, commit aac8a70db2 ("xen-blkback: add a parameter for
disabling of persistent grants") has mistakenly changed the behavior.
It made the frontend feature support check to not be repeated once it
shown the 'feature_persistent' as 'false', or the frontend doesn't
support persistent grants.
This commit changes the behavior of the parameter to make effect for
every connect, so that the previous workflow can work again as expected.
[1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/
Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com>
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
- Introduce a 'struct cxl_region' object with support for provisioning
and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYvLYmAAKCRDfioYZHlFs
Z0pbAQC/3j+WriWpU7CdhrnZI1Wqn+x5IIklF0Lc4/f6LwGZtAEAsSbLpItzvwqx
M/rcLaeLpwYlgvS1JjdsuQ2VQ7KOtAs=
=ehNT
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
In this cycle, we mainly fixed some corner cases that manipulate a per-file
compression flag inappropriately. And, we found f2fs counted valid blocks in a
section incorrectly when zone capacity is set, and thus, fixed it with
additional sysfs entry to check it easily. Lastly, this series includes
several patches with respect to the new atomic write support such as a
couple of bug fixes and re-adding atomic_write_abort support that we removed
by mistake in the previous release.
Enhancement:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fix:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity checks.
-----BEGIN PGP SIGNATURE-----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=dJ41
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we mainly fixed some corner cases that manipulate a
per-file compression flag inappropriately. And, we found f2fs counted
valid blocks in a section incorrectly when zone capacity is set, and
thus, fixed it with additional sysfs entry to check it easily.
Lastly, this series includes several patches with respect to the new
atomic write support such as a couple of bug fixes and re-adding
atomic_write_abort support that we removed by mistake in the previous
release.
Enhancements:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic
latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fixes:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity
checks"
* tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: use onstack pages instead of pvec
f2fs: intorduce f2fs_all_cluster_page_ready
f2fs: clean up f2fs_abort_atomic_write()
f2fs: handle decompress only post processing in softirq
f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED
f2fs: do not set compression bit if kernel doesn't support
f2fs: remove device type check for direct IO
f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
f2fs: revive F2FS_IOC_ABORT_VOLATILE_WRITE
f2fs: fix to do sanity check on segment type in build_sit_entries()
f2fs: obsolete unused MAX_DISCARD_BLOCKS
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
f2fs: introduce sysfs atomic write statistics
f2fs: don't bother wait_ms by foreground gc
f2fs: invalidate meta pages only for post_read required inode
f2fs: allow compression of files without blocks
f2fs: fix to check inline_data during compressed inode conversion
f2fs: Delete f2fs_copy_page() and replace with memcpy_page()
f2fs: fix to invalidate META_MAPPING before DIO write
...
- Add support for syscall stack randomization.
- Add support for atomic operations to the 32 & 64-bit BPF JIT.
- Full support for KASAN on 64-bit Book3E.
- Add a watchdog driver for the new PowerVM hypervisor watchdog.
- Add a number of new selftests for the Power10 PMU support.
- Add a driver for the PowerVM Platform KeyStore.
- Increase the NMI watchdog timeout during live partition migration, to avoid timeouts
due to increased memory access latency.
- Add support for using the 'linux,pci-domain' device tree property for PCI domain
assignment.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira Rajeev, Bagas
Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Greg Kurz,
Haowen Bai, Hari Bathini, Jason A. Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg
Haefliger, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch, Naveen N. Rao, Nayna
Jain, Nicholas Piggin, Ning Qiang, Pali Rohár, Petr Mladek, Rashmica Gupta, Sachin Sant,
Scott Cheloha, Segher Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, Zhouyi Zhou.
-----BEGIN PGP SIGNATURE-----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=tRkm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
cUTAoWxAf5orClAC22ZU
=Vcqd
-----END PGP SIGNATURE-----
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Here is the set of driver core and kernfs changes for 6.0-rc1.
"biggest" thing in here is some scalability improvements for kernfs for
large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed
and discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYuqCnw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym/JgCcCnaycJY00ZPRQm3LQCyzfJ0HgqoAn2qxGV+K
NKycLeXZSnuvIA87dycE
=/4Jk
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
earth-shaking:
- More Chinese translations, and an update to the Italian translations.
The Japanese, Korean, and traditional Chinese translations are
more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document, with the
movement of what useful material that remained into other docs.
- Improvements to sphinx-pre-install to, hopefully, give more useful
suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn
WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0
+C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw
PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP
Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme
Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0=
=83BG
-----END PGP SIGNATURE-----
Merge tag 'docs-6.0' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
API:
- Make proc files report fips module name and version.
Algorithms:
- Move generic SHA1 code into lib/crypto.
- Implement Chinese Remainder Theorem for RSA.
- Remove blake2s.
- Add XCTR with x86/arm64 acceleration.
- Add POLYVAL with x86/arm64 acceleration.
- Add HCTR2.
- Add ARIA.
Drivers:
- Add support for new CCP/PSP device ID in ccp.
-----BEGIN PGP SIGNATURE-----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=rfWK
-----END PGP SIGNATURE-----
Merge tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Make proc files report fips module name and version
Algorithms:
- Move generic SHA1 code into lib/crypto
- Implement Chinese Remainder Theorem for RSA
- Remove blake2s
- Add XCTR with x86/arm64 acceleration
- Add POLYVAL with x86/arm64 acceleration
- Add HCTR2
- Add ARIA
Drivers:
- Add support for new CCP/PSP device ID in ccp"
* tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits)
crypto: tcrypt - Remove the static variable initialisations to NULL
crypto: arm64/poly1305 - fix a read out-of-bound
crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps
crypto: hisilicon/sec - fix auth key size error
crypto: ccree - Remove a useless dma_supported() call
crypto: ccp - Add support for new CCP/PSP device ID
crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq
crypto: testmgr - some more fixes to RSA test vectors
cyrpto: powerpc/aes - delete the rebundant word "block" in comments
hwrng: via - Fix comment typo
crypto: twofish - Fix comment typo
crypto: rmd160 - fix Kconfig "its" grammar
crypto: keembay-ocs-ecc - Drop if with an always false condition
Documentation: qat: rewrite description
Documentation: qat: Use code block for qat sysfs example
crypto: lib - add module license to libsha1
crypto: lib - make the sha1 library optional
crypto: lib - move lib/sha1.c into lib/crypto/
crypto: fips - make proc files report fips module name and version
...
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
- Substantial rewrite of lm90 driver to support several
additional chips and improve support for existing chips.
- Add support of ROG ZENITH II EXTREME, Maximus XI Hero,
Strix Z690-a D4 to asus-ec-sensors driver
- Add support of F71858AD to f71882fg driver
- Add support of Aquacomputer Quadro to aquacomputer_d5next
driver
- Improved assembler code and add support for Dell G5 5590
as well as XPS 13 7390 in dell-smm driver
- Add support for ASUS TUF GAMING B550-PLUS WIFI II to nct775 driver
- Add support for IEEE 754 half precision to PMBus core.
Also support for Analog Devices LT7182S, improve
regulator support, and report various MFR register
values in debugfs.
- Various other minor improvements and fixes
-----BEGIN PGP SIGNATURE-----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=M9iY
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- Substantial rewrite of lm90 driver to support several additional
chips and improve support for existing chips.
- Add support of ROG ZENITH II EXTREME, Maximus XI Hero, and
Strix Z690-a D4 to asus-ec-sensors driver
- Add support of F71858AD to f71882fg driver
- Add support of Aquacomputer Quadro to aquacomputer_d5next driver
- Improved assembler code and add support for Dell G5 5590 as well as
XPS 13 7390 in dell-smm driver
- Add support for ASUS TUF GAMING B550-PLUS WIFI II to nct775 driver
- Add support for IEEE 754 half precision to PMBus core. Also support
for Analog Devices LT7182S, improve regulator support, and report
various MFR register values in debugfs.
- Various other minor improvements and fixes
* tag 'hwmon-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (85 commits)
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller
hwmon: (dell-smm) Improve documentation
hwmon: (nct6775) add ASUS TUF GAMING B550-PLUS WIFI II
hwmon: (occ) Replace open-coded variant of %*phN specifier
hwmon: (sht15) Fix wrong assumptions in device remove callback
hwmon: (aquacomputer_d5next) Add support for reading the +12V voltage sensor on D5 Next
hwmon: (tps23861) fix byte order in current and voltage registers
hwmon: (aspeed-pwm-tacho) increase fan tach period (again)
hwmon: (aquacomputer_d5next) Add D5 Next fan control support
hwmon: (mcp3021) improve driver support for newer hwmon interface
hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREME
hwmon: (aquacomputer_d5next) Move device-specific data into struct aqc_data
hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMING
hwmon: (drivetemp) Add module alias
hwmon: (asus_wmi_sensors) Save a few bytes of memory
hwmon: (lm90) Use worker for alarm notifications
hwmon: (asus-ec-sensors) add support for Maximus XI Hero
hwmon: (dell-smm) Improve assembly code
hwmon: (pmbus/ltc2978) Set voltage resolution
hwmon: (pmbus) Add list_voltage to pmbus ops
...
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU remains
enabled and the boot time is no longer slowed to a crawl for systems
which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages on
systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to reduce
the need for cache maintenance and avoid jumping in and out of the
kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmLeccUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCysB/4ml92RJLhVwRAofbtFfVgVz3JLTSsvob9x
Z7FhNDxfM/G32wKtOHU9tHkGJ+PMVWOPajukzxkMhxmilfTyHBbiisNWVRjKQxj4
wrd07DNXPIv3bi8SWzS1y2y8ZqujZWjNJlX8SUCzEoxCVtuNKwrh96kU1jUjrkFZ
kBo4E4wBWK/qW29nClGSCgIHRQNJaB/jvITlQhkqIb0pwNf3sAUzW7QoF1iTZWhs
UswcLh/zC4q79k9poegdCt8chV5OBDLtLPnMxkyQFvsLYRp3qhyCSQQY/BxvO5JS
jT9QR6d+1ewET9BFhqHlIIuOTYBCk3xn/PR9AucUl+ZBQd2tO4B1
=LVH0
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
introduce the below 4 new sysfs node for atomic write statistics.
- current_atomic_write: the total current atomic write block count,
which is not committed yet.
- peak_atomic_write: the peak value of total current atomic write block
count after boot.
- committed_atomic_block: the accumulated total committed atomic write
block count after boot.
- revoked_atomic_block: the accumulated total revoked atomic write block
count after boot.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a sysfs entry showing the unusable space in a section
made by zone capacity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After all the soft validation of the region has completed, convey the
region configuration to hardware while being careful to commit decoders
in specification mandated order. In addition to programming the endpoint
decoder base-address, interleave ways and granularity, the switch
decoder target lists are also established.
While the kernel can enforce spec-mandated commit order, it can not
enforce spec-mandated reset order. For example, the kernel can't stop
someone from removing an endpoint device that is occupying decoderN in a
switch decoder where decoderN+1 is also committed. To reset decoderN,
decoderN+1 must be torn down first. That "tear down the world"
implementation is saved for a follow-on patch.
Callback operations are provided for the 'commit' and 'reset'
operations. While those callbacks may prove useful for CXL accelerators
(Type-2 devices with memory) the primary motivation is to enable a
simple way for cxl_test to intercept those operations.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784338418.1758207.14659830845389904356.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The region provisioning process involves allocating DPA to a set of
endpoint decoders, and HPA plus the region geometry to a region device.
Then the decoder is assigned to the region. At this point several
validation steps can be performed to validate that the decoder is
suitable to participate in the region.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/165784336184.1758207.16403282029203949622.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After a region's interleave parameters (ways and granularity) are set,
add a way for regions to allocate HPA (host physical address space) from
the free capacity in their parent root-decoder. The allocator for this
capacity reuses the 'struct resource' based allocator used for
CONFIG_DEVICE_PRIVATE.
Once the tuple of "ways, granularity, [uuid], and size" is set the
region configuration transitions to the CXL_CONFIG_INTERLEAVE_ACTIVE
state which is a precursor to allowing endpoint decoders to be added to
a region.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784335630.1758207.420216490941955417.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add ABI to allow the number of devices that comprise a region to be
set as well as the interleave granularity for the region.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
[djbw: reword changelog]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-11-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The process of provisioning a region involves triggering the creation of
a new region object, pouring in the configuration, and then binding that
configured object to the region driver to start its operation. For
persistent memory regions the CXL specification mandates that it
identified by a uuid. Add an ABI for userspace to specify a region's
uuid.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
[djbw: simplify locking]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784334465.1758207.8224025435884752570.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
After merging forced_eject patch, there was a broken margin
in the configfs parameters table in the ABI documentation.
This patch fixes it.
Fixes: 421c8d9a20 ("usb: gadget: f_mass_storage: forced_eject attribute")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20220723101432.72178-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs description contains redundancy on returned and allowed values
list, due to the described sysfs is read-write. Rewrite.
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Adam Guerin <adam.guerin@intel.com>
Cc: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Wojciech Ziemba <wojciech.ziemba@intel.com>
Cc: Fiona Trahe <fiona.trahe@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kernel test robot and Stephen Rothwell reported htmldocs warning:
Documentation/ABI/testing/sysfs-driver-qat:24: WARNING: Unexpected indentation.
The warning isn't caused by Date: field pointed by the warning, but rather
by sysfs example that isn't in literal code block.
Add the code block marker.
Link: https://lore.kernel.org/linux-next/20220711204932.333379b4@canb.auug.org.au/
Link: https://lore.kernel.org/linux-doc/202207090803.TEGI95qw-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: d4cfb144f6 ("crypto: qat - expose device config through sysfs for 4xxx")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Wojciech Ziemba <wojciech.ziemba@intel.com>
Cc: Adam Guerin <adam.guerin@intel.com>
Cc: Fiona Trahe <fiona.trahe@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Vladis Dronov <vdronov@redhat.com>
Cc: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The region provisioning flow involves selecting interleave ways +
granularity settings for a region, and then programming the decoder
topology to meet those constraints, if possible. For example, root
decoders set the minimum interleave ways + granularity for any hosted
regions.
Given decoder programming is not atomic and collisions can occur between
multiple requesting regions userspace will be responsible for conflict
resolution and it needs these attributes to make those decisions.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784332235.1758207.7185062713652694607.stgit@dwillia2-xfh.jf.intel.com
[djbw: reword changelog, make read-only, add sysfs ABI documentaion]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The region provisioning flow will roughly follow a sequence of:
1/ Allocate DPA to a set of decoders
2/ Allocate HPA to a region
3/ Associate decoders with a region and validate that the DPA allocations
and topologies match the parameters of the region.
For now, this change (step 1) arranges for DPA capacity to be allocated
and deleted from non-committed decoders based on the decoder's mode /
partition selection. Capacity is allocated from the lowest DPA in the
partition and any 'pmem' allocation blocks out all remaining ram
capacity in its 'skip' setting. DPA allocations are enforced in decoder
instance order. I.e. decoder N + 1 always starts at a higher DPA than
instance N, and deleting allocations must proceed from the
highest-instance allocated decoder to the lowest.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784329399.1758207.16732038126938632700.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Recall that the Device Physical Address (DPA) space of a CXL Memory
Expander is potentially partitioned into a volatile and persistent
portion. A decoder maps a Host Physical Address (HPA) range to a DPA
range and that translation depends on the value of all previous (lower
instance number) decoders before the current one.
In preparation for allowing dynamic provisioning of regions, decoders
need an ABI to indicate which DPA partition a decoder targets. This ABI
needs to be prepared for the possibility that some other agent committed
and locked a decoder that spans the partition boundary.
Add 'decoderX.Y/mode' to endpoint decoders that indicates which
partition 'ram' / 'pmem' the decoder targets, or 'mixed' if the decoder
currently spans the partition boundary.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603881967.551046.6007594190951596439.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Create a new attribute group meant to provide a single place that
defines endpoint IDs that might be needed by user space. Not all
defined endpoints are presented, and only those that are defined
will be made visible.
The new attributes use "extended" device attributes to hold endpoint
IDs, which is a little more compact and efficient. Reimplement the
existing modem endpoint ID attribute files using common code.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220719191639.373249-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few weeks ago, QEMU switched docs/specs/fw_cfg.txt to be
docs/specs/fw_cfg.rst, so update the reference in the kernel docs to
reflect this. Also add a link to the online documentation to make it
easier to find.
Cc: Simon Sapin <simon.sapin@exyr.org>
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220720123131.341755-1-Jason@zx2c4.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The per-device CDAT data provides performance data that is relevant for
mapping which CXL devices can participate in which CXL ranges by QTG
(QoS Throttling Group) (per ECN: CXL 2.0 CEDT CFMWS & QTG_DSM) [1]. The
QTG association specified in the ECN is advisory. Until the
cxl_acpi driver grows support for invoking the QTG _DSM method the CDAT
data is only of interest to userspace that may need it for debug
purposes.
Search the DOE mailboxes available, query CDAT data, cache the data and
make it available via a sysfs binary attribute per endpoint at:
/sys/bus/cxl/devices/endpointX/CDAT
...similar to other ACPI-structured table data in
/sys/firmware/ACPI/tables. The CDAT is relative to 'struct cxl_port'
objects since switches in addition to endpoints can host a CDAT
instance. Switch CDAT support is not implemented.
This does not support table updates at runtime. It will always provide
whatever was there when first cached. It is also the case that table
updates are not expected outside of explicit DPA address map affecting
commands like Set Partition with the immediate flag set. Given that the
driver does not support Set Partition with the immediate flag set there
is no current need for update support.
Link: https://www.computeexpresslink.org/spec-landing [1]
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
[djbw: drop in-kernel parsing infra for now, and other minor fixups]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220719205249.566684-7-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
"make htmldocs" emits a warning of:
Documentation/ABI/testing/sysfs-bus-iio-sx9324:2: WARNING: Unexpected indentation.
This is due to a missing empty line in front of the bullet list.
Fix it.
Note: The line count of 2 in the warning is not exact in this case.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: 4c18a890df ("iio:proximity:sx9324: Add SX9324 support")
Link: https://lore.kernel.org/r/202207021703.lEW6FLT1-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/abcaa4f5-7a9b-56b5-c11a-a88fef9d1e0a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We can't duplicate the description of sampling_frequency. This device
has some unusual requirements which we solved by giving a
sampling_frequency of 0 special meaning. As such add a note
about this unusual usage to the main documentation.
Whilst I don't particularly like this resolution, it is the best
I could come up with given earlier discussion on this topic.
Link: https://lore.kernel.org/linux-iio/20210315101217.00002c50@Huawei.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220626165511.602202-4-jic23@kernel.org
As this is the last element in the file, also delete the file.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Navin Sankar Velliangiri <navin@linumiz.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220626165511.602202-3-jic23@kernel.org
Kernel documentation for a given ABI element should not be duplicated
in multiple files, so pull them into one higher level documentation file.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Navin Sankar Velliangiri <navin@linumiz.com>
Cc: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220626165511.602202-2-jic23@kernel.org
Details is added about "caps" attribute group in the ABI documentation.
This is used to expose some of the PMU attributes in "caps"
directory under : /sys/bus/event_source/devices/<dev>/. The dev/caps
will contain information about features that platform specific PMU
supports.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220520084630.15181-2-atrajeev@linux.vnet.ibm.com
Add documentation for the new attributes:
- "asic2_health" - health of 2-nd ASIC for system equipped with two ASICs.
- "asic_reset" and "asic2_reset" - ASICs reset control.
- "comm_chnl_ready" - communication channel indication to remote end (BMC).
- "config3" - indication of system minor BOM changes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-10-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Going forward, I'll be using my kernel.org for upstream work.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220714112533.539910-6-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Going forward, I'll be using my kernel.org for upstream work.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220714112533.539910-5-lee@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It allows to reset prevent_medium_removal flag and "eject" the image.
This can be useful to free the drive from a hunging host or if the host
continues to use the drive even after unmounting (Linux does this).
It's also a bit like using an unfolded paperclip on an optical drive.
Previously, the undocumented method of sending SIGUSR1 to a special
"file-storage" kernel thread could be used for these purposes,
but when using multiple storages there was no way to distinguish
one from the other, so we had to send a signal to everyone.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20220711102956.19642-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
-----BEGIN PGP SIGNATURE-----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=IcsE
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.
One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.
Device support
* bmi088
- Add support for bmi085 (accelerometer part of IMU)
- Add support for bmi090l (accelerometer part of IMU)
* mcp4922
- Add support for single channel device MCP4921
* rzg2l-adc
- Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
- Add support for scl3300 including refactoring driver to support
multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
- New driver for Qualcomm SPMI Round Robin ADC including necessary
additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
- Add compatible for DAC121C081 which is very similar to existing parts.
Features
* core
- Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
- Triggered buffer support
- Activity and step counting
- Misc driver improvements such as devm and header ordering
* cm32181
- Add PM support.
* cros_ec
- Sensor location support
* sx9324
- Add precharge resistor setting
- Add internal compensation resistor setting
- Add CS idle/sleep mode.
* sx9360
- Add precharge resistor setting
* vl53l0x
- Handle reset GPIO, regulator and relax handling of irq type.
Cleanup and minor fixes:
Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
generic device properties. Includes fixing up various related
header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
IIO was using __cacheline_aligned to pad iio_priv() structures. This
worked for a long time by coincidence, but correct alignment is
ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce
an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
than every driver in future. Note, there have been no reports of this
bug in the wild, and it may not happen on any platforms supported by
upstream, so no rush to backport these fixes.
Other cleanup
* core
- Switch to ida_alloc()/free()
- Drop unused iio_get_time_res()
- Octal permissions and DEVICE_ATTR_* macros.
- Cleanup bared unsigned usage.
* MAINTAINERS
- Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
- Comment syntax fix.
* ad74413r
- Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
- Fix wrong address in dt-binding example.
* adxl367
- Drop extra update of FIFO watermark.
* at91-sama5d2
- Limit requested watermark to the hwfifo size.
* bmg160, bme680
- Typos
* cio-dac
- Switch to iomap rather than direct use of ioports
* kxsd9
- Replace CONFIG_PM guards with new PM macros that let the compiler
cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
- Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
to Namespace.
* meson_saradc - general cleanup.
- Avoid attaching resources to iio_dev->dev
- Use same struct device for all error messages
- Convert to dev_err_probe() and use local struct device *dev to
reduce code complexity.
- Use devm_clk_get_optional() instead of hand rolling.
- Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
- Drop ACPI_PTR() use that is unhelpful.
* mpu3050
- Stop exporting symbols not used outside of module
- Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
- Typo fix
* qcom-spmi-rradc
- Typo fix
* sc27xx
- Convert to generic struct u32_fract
* srf08
- Drop a redundant check on !val
* st_lsm6dsx
- Limit the requested watermark to the hwfifo size.
* stm32-adc
- Use generic_handle_domain_irq() instead of opencoding.
- Fix handling of ADC disable.
* stm32-dac
- Use str_enabled_disable() instead of open coding.
* stx104
- Switch to iomap rather than direct use of ioports
* tsc2046
- Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
- Replace flush_scheduled_work() with cancel_delayed_work_sync()
- Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
- Make the VDD regulator optional by allowing a dummy regulator.
* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
iio: adc: xilinx-xadc: Make use of device properties
iio: light: cm32181: Add PM support
iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
iio: adc: stm32-adc: disable adc before calibration
iio: adc: stm32-adc: make safe adc disable
iio: dac: ad5380: align '*' each line and drop unneeded blank line
iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
iio: Don't use bare "unsigned"
dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
iio: dac: mcp4922: add support to mcp4921
iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
iio: adc: stm32-adc: Use generic_handle_domain_irq()
proximity: vl53l0x: Make VDD regulator actually optional
MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
iio: gyro: bmg160: Fix typo in comment
...
Enabling and disabling PEC for PMBus devices is currently only supported
with a debugfs attribute, which requires debugfs to be enabled and is
thus less than perfect. Take the lm90 driver as example and add a 'pec'
attribute to the I2C device if both the I2C adapter and the PMBus device
support it. Remove the now obsolete 'pec' attribute from debugfs.
Cc: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In case security is enabled on the device, some debugfs nodes will
fail. Hence, we do not expose them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add the ASIC-specific code for Gaudi2. Supply (almost) all of the
function callbacks that the driver's common code need to initialize,
finalize and submit workloads to the Gaudi2 ASIC.
It also contains the code to initialize the F/W of the Gaudi2 ASIC
and to receive events from the F/W.
It contains new debugfs entry to dump razwi events. razwi is a case
where the device's engines create a transaction that reaches an
invalid destination.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the callback scrub_device_mem, use 'memory_scrub_val'
from debugfs for the scrubbing value.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Clarify the access permission of CXL sysfs attributes in the
documentation to help development of userspace tooling.
Reported-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603881198.551046.12893348287451903699.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qat_4xxx devices can be configured to allow either crypto or compression
operations. At the moment, devices are configured statically according to
the following rule:
- odd numbered devices assigned to compression services
- even numbered devices assigned to crypto services
Expose the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/cfg_services
to allow to detect the configuration of a device and to change it.
The `cfg_service` attribute is only exposed for qat_4xxx devices and it
is limited to two configurations: (1) "sym;asym" for crypto services and
"dc" for compression services.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the device state through an attribute in sysfs and allow to
change it. This is to stop and shutdown a QAT device in order to change
its configuration.
The state attribute has been added to a newly created `qat` attribute
group which will contain all _QAT specific_ attributes.
The logic that implements the sysfs entries is part of a new file,
adf_sysfs.c. This exposes an entry point to allow the driver to create
attributes.
The function that creates the sysfs attributes is called from the probe
function of the driver and not in the state machine init function to
allow the change of states even if the device is in the down state.
In order to restore the device configuration between a transition from
down to up, the function that configures the devices has been abstracted
into the HW data structure.
The `state` attribute is only exposed for qat_4xxx devices.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Signed-off-by: Tomasz Kowallik <tomaszx.kowalik@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pss is the sum of the sizes of clean and dirty private pages, and the
proportional sizes of clean and dirty shared pages:
Private = Private_Dirty + Private_Clean
Shared_Proportional = Shared_Dirty_Proportional + Shared_Clean_Proportional
Pss = Private + Shared_Proportional
The Shared*Proportional fields are not present in smaps, so it is not
always possible to determine how much of the Pss is from dirty pages and
how much is from clean pages. This information can be useful for
measuring memory usage for the purpose of optimisation, since clean pages
can usually be discarded by the kernel immediately while dirty pages
cannot.
The smaps routines in the kernel already have access to this data, so add
a Pss_Dirty to show it to userspace. Pss_Clean is not added since it can
be calculated from Pss and Pss_Dirty.
Link: https://lkml.kernel.org/r/20220620081251.2928103-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a driver providing a tablet-mode switch input device for Microsoft
Surface devices using the Surface Aggregator KIP subsystem (to manage
detachable peripherals) or POS subsystem (to obtain device posture
information).
The KIP (full name unknown, abbreviation found through reverse
engineering) subsystem is used on the Surface Pro 8 and Surface Pro X to
manage the keyboard cover. Among other things, it provides information
on the positioning (posture) of the cover (closed, laptop-style,
detached, folded-back, ...), which can be used to implement an input
device providing the SW_TABLET_MODE event. Similarly, the POS (posture
information) subsystem provides such information on the Surface Laptop
Studio, with the difference being that the keyboard is not detachable.
As implementing the tablet-mode switch for both subsystems is largely
similar, the driver proposed in this commit, in large, acts as a generic
tablet mode switch driver framework for the Surface Aggregator Module.
Specific implementations using this framework are provided for the KIP
and POS subsystems, adding tablet-mode switch support to the
aforementioned devices.
A few more notes on the Surface Laptop Studio:
A peculiarity of the Surface Laptop Studio is its "slate/tent" mode
(symbolized: user> _/\). In this mode, the screen covers the keyboard
but leaves the touchpad exposed. This is essentially a mode in-between
tablet and laptop, and it is debatable whether tablet-mode should be
enabled in this mode. We therefore let the user decide this via a module
parameter.
In particular, tablet-mode may bring up the on-screen touch keyboard
more easily, which would be desirable in this mode. However, some
user-space software currently also decides to disable keyboard and, more
importantly, touchpad input, while the touchpad is still accessible in
the "slate/tent" mode. Furthermore, this mode shares its identifier with
"slate/flipped" mode where the screen is flipped 180° and the keyboard
points away from the user (symbolized: user> /_). In this mode we would
like to enable auto-rotation, something that user-space software may
only do when tablet-mode is enabled. We therefore default to the
slate-mode enabling the tablet-mode switch.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624183642.910893-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
so it will be consistent with code mm directory and with
Documentation/admin-guide/mm and won't be confused with virtual machines.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Wu XiangCheng <bobwxc@email.cn>
This was already defined at stable/sysfs-devices-system-cpu with
the same description, as pointed by get_abi.pl:
Warning: /sys/devices/system/cpu/cpuX/topology/core_id is defined 2 times: Documentation/ABI/stable/sysfs-devices-system-cpu:38 Documentation/ABI/testing/sysfs-devices-system-cpu:69
Remove the duplicated one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/1e92337c1ef74f5eb9e1c1871e20b858b490d269.1656235926.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds missing documentation for VDUSE sysfs interface ABI
under Documentation/ABI/testing.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220524115143.187-1-xieyongji@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User space may want to know how to align their buffers to avoid
bouncing. Export the queue attribute.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220610195830.3574005-4-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmK4zgIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrI8H+MeIYPff1m9vh1rZ
u1eCCtw/A+NqJ5l0Cq3Zj090crMb8zVkxr5QrdPxxJuxAK8AI/XzOUQivnNayp6v
bvWcbj9e95ZoIQjbPakozo3KYnaHXMFfrq6JNdGIBJ5yt5pVHtJ3iZk25wUZEghD
8lxoz4Uiuo14ZbLnlLjbXr5OEVupOH1OoQPghkSoolD8JBe1coOIYbzzJ69HBwNg
kCUyD0CsFCBpy0P7yBnPNrvQGOt+NVz9FLfEbYFj+ydQjzw3NNw7tyKTahqp7ScN
BS5Ftt0kuHqOyWDO9OP6dG1kGmvIWQZkrEroz1TS4FfgrrPRr5r0N9+tGvr9+tpZ
1tjaBA==
=L7lN
-----END PGP SIGNATURE-----
Merge 5.19-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We currently expose MIDR and REVID to userspace through sysfs to enable it
to make decisions based on the specific implementation. Since SME supports
implementations where streaming mode is provided by a separate hardware
unit called a SMCU it provides a similar ID register SMIDR. Expose it to
userspace via sysfs when the system supports SME along with the other ID
registers.
Since we disable the SME priority mapping feature if it is supported by
hardware we currently mask out the SMPS bit which reports that it is
supported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220607132857.1358361-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
FPGA static firmware loader
- Russ's change to add support for Intel MAX10 BMC Secure
Update driver which instantiates the new Firmware Upload
functionality (merged on last cycle) of the Firmware
Loader.
DFL
- keliu's change to use ida_alloc()/ida_free() instead of
deprecated ida_simple_get()/ida_simple_remove()
ALTERA
- Marco's change to fix a "comparison with less than zero"
warning
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCYrFHrhMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIza8YYA/R6FJhVHLcN2Sfta9s3V3tyLVwxKRK4+
507yHd1CIHpEAQC2r6tQmqSeyl8eNhFHKhz6qkVRsYIMziKuFbtlbwArAg==
=kw8h
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
Here is the first set of FPGA changes for 5.20-rc1
FPGA static firmware loader
- Russ's change to add support for Intel MAX10 BMC Secure
Update driver which instantiates the new Firmware Upload
functionality (merged on last cycle) of the Firmware
Loader.
DFL
- keliu's change to use ida_alloc()/ida_free() instead of
deprecated ida_simple_get()/ida_simple_remove()
ALTERA
- Marco's change to fix a "comparison with less than zero"
warning
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: altera-pr-ip: fix unsigned comparison with less than zero
fpga: Directly use ida_alloc()/free()
fpga: m10bmc-sec: add max10 secure update functions
fpga: m10bmc-sec: expose max10 canceled keys in sysfs
fpga: m10bmc-sec: expose max10 flash update count
fpga: m10bmc-sec: create max10 bmc secure update
mfd: intel-m10-bmc: Rename n3000bmc-secure driver
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
-----BEGIN PGP SIGNATURE-----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=AtPS
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
* tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmKvgdceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0qMH/RnVz4BvYXVWWc1t
+4NT9N20pNzrByzUxSBsrLfL5BNIt9fNjrS0WLs4HlzExbiixvKIBHPkDZoCo1gQ
wxoqpJf2BMxmdXH46/wWdSszbdPk33eLM/MfYE2QfnmtYsDSLZQMzOUAcdh6qD53
ty9br3IM/g4ixCwxKRt3NNixjin4wTTxR5ZD2E5k0JAaT+4FW5llRvq92dA1UOq7
JeGRLkc2l0211MFLo0vtuPOyWMIQL8t98rKTzevwoVY7R9I/0uUJCbkU7mb9wMUY
yKYlTN/4ZikTTSxa8NpQsXHqTyOHaKmS5F6oE4sw9VurHI2u3Jmxy9j9AwO1Pn8C
JUizMCk=
=qqcu
-----END PGP SIGNATURE-----
Merge v5.19-rc3 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stale Data.
They are a class of MMIO-related weaknesses which can expose stale data
by propagating it into core fill buffers. Data which can then be leaked
using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too.
-----BEGIN PGP SIGNATURE-----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=LBxT
-----END PGP SIGNATURE-----
Merge tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
All the USB Type-C Connector Class devices are protected, so
the drivers can not directly access them. This will adds a
few helpers that can be used to link the ports and partners
to the correct USB Power Delivery objects.
For ports a new optional sysfs attribute file is also added
that can be used to select the USB Power Delivery
capabilities that the port will advertise to the partner.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introducing a small device class for USB Power Delivery.
The idea with it is that we do not mix any more USB Power
Delivery information into the USB Type-C connectors only.
This separation will make it possible to register USB Power
Delivery devices also from other places, for example from
USB Type-C Bridges (see USB Type-C Bridge Specification).
The device class will not always deal with only the messages
and objects that were negotiated with the partner, but
instead messages and objects that can be used in the
negotiation. That allows the USB PD devices to be shared and
reconfigured. The ports can decide which objects are to be
advertised to the partner before the contract is negotiated.
It is also possible to allow the user space to make that
decision if needed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases the port of an hub needs to be disabled or switched off
and on again. E.g. when the connected device needs to be re-enumerated.
Or it needs to be explicitly disabled while the rest of the usb tree
stays working.
For this purpose this patch adds an sysfs switch to enable/disable the
port on any hub. In the case the hub is supporting power switching, the
power line will be disabled to the connected device.
When the port gets disabled, the associated device gets disconnected and
removed from the logical usb tree. No further device will be enumerated
on that port until the port gets enabled again.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220607114522.3359148-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "accel-camera" when an IMU is location near the camera in a swivel
sub-assembly. These IMU are used for AR applications.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220427190804.961697-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The {dma|pio}_mode sysfs files are incorrectly documented as having a
list of the supported DMA/PIO transfer modes, while the corresponding
fields of the *struct* ata_device hold the transfer mode IDs, not masks.
To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs
files are handled by the ata_bitfield_name_match() macro which leads to
reading such kind of nonsense from them:
$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4,
XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1,
XFER_PIO_0
Using the correct ata_bitfield_name_search() macro fixes that:
$ cat /sys/class/ata_device/dev3.0/pio_mode
XFER_PIO_4
While fixing the file documentation, somewhat reword the {dma|pio}_mode
file doc and add a note about being mostly useful for PATA devices to
the xfer_mode file doc...
Fixes: d9027470b8 ("[libata] Add ATA transport class")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Extend the MAX10 BMC Secure Update driver to provide sysfs files to
expose the 128 bit code signing key (CSK) cancellation vectors. These use
the standard bitmap list format (e.g. 1,2-6,9).
Each CSK is assigned an ID, a number between 0-127, during the signing
process. CSK ID cancellation information is stored in 128-bit fields in
write-once locations in flash. The cancellation of a CSK can be used
to prevent the card from being rolled back to older images that were
signed with a CSK that is now cancelled.
Reviewed-by: Tom Rix <trix@redhat.com>
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-5-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Create a sub-driver for the FPGA Card BMC in order to support secure
updates. This patch creates the Max10 BMC Secure Update driver and
provides sysfs files for displaying the root entry hashes (REH) for the
FPGA static region (SR), the FPGA Partial Reconfiguration (PR) region,
and the card BMC.
The Intel MAX10 BMC Root of Trust (RoT) requires that all BMC Nios firmware
and FPGA images are authenticated using ECDSA before loading and executing
on the card. Code Signing Keys (CSK) are used to sign images. CSKs are
signed by a root key. The root entry hash is created from the root public
key.
The RoT provides authentication by storing an REH bitstream to a write-once
location. Image signatures are verified against the hash.
Reviewed-by: Tom Rix <trix@redhat.com>
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-3-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Here is the set of driver core changes for 5.19-rc1.
Note, I'm not really happy with this pull request as-is, see below for
details, but overall this is all good for everything but a small set of
systems, which we have a fix for already.
Lots of tiny driver core changes and cleanups happened this cycle,
but the two major things were:
- firmware_loader reorganization and additions including the
ability to have XZ compressed firmware images and the ability
for userspace to initiate the firmware load when it needs to,
instead of being always initiated by the kernel. FPGA devices
specifically want this ability to have their firmware changed
over the lifetime of the system boot, and this allows them to
work without having to come up with yet-another-custom-uapi
interface for loading firmware for them.
- physical location support added to sysfs so that devices that
know this information, can tell userspace where they are
located in a common way. Some ACPI devices already support
this today, and more bus types should support this in the
future.
Smaller changes included:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten any
linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request if you want to take them directly, _OR_ I can just revert
the probe timeout changes and they can wait for the next -rc1 merge
cycle. Given that the fixes are tested, and pretty simple, I'm leaning
toward that choice. Sorry this all came at the end of the merge window,
I should have resolved this all 2 weeks ago, that's my fault as it was
in the middle of some travel for me.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time outs.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnv/A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk/fACgvmenbo5HipqyHnOmTQlT50xQ9EYAn2eTq6ai
GkjLXBGNWOPBa5cU52qf
=yEi/
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for the
USB core, but there are the usual "hot spots" of development activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes. It seems this driver will never
be finished given that the IP core is showing up in zillions
of new devices and each implementation decides to do something
different with it...
- uvc gadget driver updates as more devices start to use and
rely on this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnZGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQhwCeLVANsQjBcL4ys4skl+1In17y28gAn3rEZ7rQ
Yv4uP9zadUqg3Cx0vjgf
=3s5s
-----END PGP SIGNATURE-----
Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT).
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later).
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ.
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later.
- Drop support for system call instruction emulation.
- Many other small features and fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn
Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan
Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu
Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent
Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan
Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár,
Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong,
Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, Zucheng
Zheng.
-----BEGIN PGP SIGNATURE-----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=15oQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
API:
- Test in-place en/decryption with two sglists in testmgr.
- Fix process vs. softirq race in cryptd.
Algorithms:
- Add arm64 acceleration for sm4.
- Add s390 acceleration for chacha20.
Drivers:
- Add polarfire soc hwrng support in mpsf.
- Add support for TI SoC AM62x in sa2ul.
- Add support for ATSHA204 cryptochip in atmel-sha204a.
- Add support for PRNG in caam.
- Restore support for storage encryption in qat.
- Restore support for storage encryption in hisilicon/sec.
-----BEGIN PGP SIGNATURE-----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=oVRe
-----END PGP SIGNATURE-----
Merge tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Test in-place en/decryption with two sglists in testmgr
- Fix process vs softirq race in cryptd
Algorithms:
- Add arm64 acceleration for sm4
- Add s390 acceleration for chacha20
Drivers:
- Add polarfire soc hwrng support in mpsf
- Add support for TI SoC AM62x in sa2ul
- Add support for ATSHA204 cryptochip in atmel-sha204a
- Add support for PRNG in caam
- Restore support for storage encryption in qat
- Restore support for storage encryption in hisilicon/sec"
* tag 'v5.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
hwrng: omap3-rom - fix using wrong clk_disable() in omap_rom_rng_runtime_resume()
crypto: hisilicon/sec - delete the flag CRYPTO_ALG_ALLOCATES_MEMORY
crypto: qat - add support for 401xx devices
crypto: qat - re-enable registration of algorithms
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - add param check for DH
crypto: qat - add param check for RSA
crypto: qat - remove dma_free_coherent() for DH
crypto: qat - remove dma_free_coherent() for RSA
crypto: qat - fix memory leak in RSA
crypto: qat - add backlog mechanism
crypto: qat - refactor submission logic
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - set to zero DH parameters before free
crypto: s390 - add crypto library interface for ChaCha20
crypto: talitos - Uniform coding style with defined variable
crypto: octeontx2 - simplify the return expression of otx2_cpt_aead_cbc_aes_sha_setkey()
crypto: cryptd - Protect per-CPU resource by disabling BH.
crypto: sun8i-ce - do not fallback if cryptlen is less than sg length
crypto: sun8i-ce - rework debugging
...
file-backed transparent hugepages.
Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for runtime
enablement of the recent huge page vmemmap optimization feature.
Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
David Vernet has done some fixup work on the memcg selftests.
Peter Xu has taught userfaultfd to handle write protection faults against
shmem- and hugetlbfs-backed files.
More DAMON development from SeongJae Park - adding online tuning of the
feature and support for monitoring of fixed virtual address ranges. Also
easier discovery of which monitoring operations are available.
Nadav Amit has done some optimization of TLB flushing during mprotect().
Neil Brown continues to labor away at improving our swap-over-NFS support.
David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
Peng Liu fixed some errors in the core hugetlb code.
Joao Martins has reduced the amount of memory consumed by device-dax's
compound devmaps.
Some cleanups of the arch-specific pagemap code from Anshuman Khandual.
Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
Roman Gushchin has done more work on the memcg selftests.
And, of course, many smaller fixes and cleanups. Notably, the customary
million cleanup serieses from Miaohe Lin.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo52xQAKCRDdBJ7gKXxA
jtJFAQD238KoeI9z5SkPMaeBRYSRQmNll85mxs25KapcEgWgGQD9FAb7DJkqsIVk
PzE+d9hEfirUGdL6cujatwJ6ejYR8Q8=
=nFe6
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
This series consists of a small set of driver updates (lpfc, ufs,
mpt3sas mpi3mr, iscsi target). Apart from that this is mostly small
fixes with very few core changes (the biggest one being VPD caching.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYo2WnyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfEiAP4zvniL
xidsiCXGQ4pWF4QW3UxukXpGh5xFREhNCYT9+QEA+DyilCALOI+ZT5GKu2V6gkby
R29ve48/NAWl3fwYjMQ=
=GPL1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of a small set of driver updates (lpfc, ufs, mpt3sas
mpi3mr, iscsi target). Apart from that this is mostly small fixes with
very few core changes (the biggest one being VPD caching)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (177 commits)
scsi: target: tcmu: Avoid holding XArray lock when calling lock_page
scsi: elx: efct: Remove NULL check after calling container_of()
scsi: dpt_i2o: Drop redundant spinlock initialization
scsi: qedf: Remove redundant variable op
scsi: hisi_sas: Fix memory ordering in hisi_sas_task_deliver()
scsi: fnic: Replace DMA mask of 64 bits with 47 bits
scsi: mpi3mr: Add target device related sysfs attributes
scsi: mpi3mr: Add shost related sysfs attributes
scsi: elx: efct: Remove redundant memset() statement
scsi: megaraid_sas: Remove redundant memset() statement
scsi: mpi3mr: Return error if dma_alloc_coherent() fails
scsi: hisi_sas: Fix rescan after deleting a disk
scsi: hisi_sas: Use sas_ata_wait_after_reset() in IT nexus reset
scsi: libsas: Refactor sas_ata_hard_reset()
scsi: mpt3sas: Update driver version to 42.100.00.00
scsi: mpt3sas: Fix junk chars displayed while printing ChipName
scsi: ipr: Use kobj_to_dev()
scsi: mpi3mr: Fix a NULL vs IS_ERR() bug in mpi3mr_bsg_init()
scsi: bnx2fc: Avoid using get_cpu() in bnx2fc_cmd_alloc()
scsi: libfc: Remove get_cpu() semantics in fc_exch_em_alloc()
...
This is mostly a drivers update including a couple of new drivers but we
do have some fixes and improvements to the core as well.
- Make sure we don't log spuriously about uncontrollable regulators.
- Don't use delays when we should use sleeps for regulators with
larger ramp times.
- Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon
Mitus SM5703.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLhDkACgkQJNaLcl1U
h9BC2ggAhixM/fsZZskBg2x8+zwCxa1WIoEOxQdo5fzYKSSLD6fzHZWc7jtww2KH
vMKE7McaX5M/xoEKWEAUutzMzaMHwLJkvUjWxlzQcOQWG7Z6Mhu5tifcdDc6Y0V2
oicpXZx7wtDDpkrmSYR+UEIcAtnWYHCIvMHZwZBk1YSeTiaajUlBAtxKLIvCl1Bg
ftVLvA0YHWv4LgDWYAGI/W0Ynh8kznsKv9qrkw1LekrdjCxe0Wo0YB0XDAKIMI7z
a/SPgr7SbSsKqYuN1cGHIs+3gzb4mr2ofQTPzn5gIbOSuaQ+T4f6zI/hvNPkzIag
seqGXGig5FEqtY7plOoaLq7uJXtvuA==
=etnu
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is mostly a drivers update including a couple of new drivers but
we do have some fixes and improvements to the core as well.
- Make sure we don't log spuriously about uncontrollable regulators.
- Don't use delays when we should use sleeps for regulators with
larger ramp times.
- Support for MediaTek MT6358 and MT6366, Richtek RT5759 and Silicon
Mitus SM5703"
* tag 'regulator-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
regulator: scmi: Fix refcount leak in scmi_regulator_probe
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
regulator: qcom_smd: Fix up PM8950 regulator configuration
regulator: core: Fix enable_count imbalance with EXCLUSIVE_GET
regulator: core: Add error flags to sysfs attributes
regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A
regulator: dt-bindings: qcom,rpmh: document supplies per variant
regulator: dt-bindings: qcom,rpmh: update maintainers
regulator: mt6315: Enforce regulator-compatible, not name
regulator: pca9450: Enable DVS control via PMIC_STBY_REQ
regulator: pca9450: Make warm reset on WDOG_B assertion
regulator: Add property for WDOG_B warm reset
regulator: pca9450: Make I2C Level Translator configurable
regulator: Add property for I2C level shifter
regulator: sm5703: Correct reference to the common regulator schema
regulator: sm5703-regulator: Add regulators support for SM5703 MFD
dt-bindings: regulator: Add bindings for Silicon Mitus SM5703 regulators
regulator: richtek,rt4801: parse GPIOs per regulator
regulator: dt-bindings: richtek,rt4801: use existing ena_gpiod feature
regulator: core: Sleep (not delay) in set_voltage()
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYo0tOhQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QJfAP47Ym9vacLc1m8/MUaRA/QjbJ/8t3TX
h/4McK8kiRudxgD/RiPHII6gJ8q+qpBrYWJZ4ZZaHE8v0oA1viuZfbuN2wc=
=KQYi
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYosaQAAKCRCAXGG7T9hj
vil9AP9b4C+f9LTG0kAinjxLPyWE0Mo/iq3gO60MteZ2HyeI+AD/eSzJioJA0vyH
4pnU/UaGLJSp/B1LitLdjwoWIvwcEws=
=pDcW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
Documentation:
- In-Field Scan
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- sysfs-class-firmware-attributes: Misc. cleanups
- sysfs-class-firmware-attributes: Fix Sphinx errors
- sysfs-driver-intel_sdsi: Fix sphinx warnings
acerhdf:
- Cleanup str_starts_with()
amd-pmc:
- Fix build error unused-function
- Shuffle location of amd_pmc_get_smu_version()
- Avoid reading SMU version at probe time
- Move FCH init to first use
- Move SMU logging setup out of init
- Fix compilation without CONFIG_SUSPEND
amd_hsmp:
- Add HSMP protocol version 5 messages
asus-nb-wmi:
- Add keymap for MyASUS key
asus-wmi:
- Update unknown code message
- Use kobj_to_dev()
- Fix driver not binding when fan curve control probe fails
- Potential buffer overflow in asus_wmi_evaluate_method_buf()
barco-p50-gpio:
- Fix duplicate included linux/io.h
dell-laptop:
- Add quirk entry for Latitude 7520
gigabyte-wmi:
- Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
- added support for B660 GAMING X DDR4 motherboard
hp-wmi:
- Correct code style related issues
intel-hid:
- fix _DSM function index handling
intel-uncore-freq:
- Prevent driver loading in guests
intel_cht_int33fe:
- Set driver data
platform/mellanox:
- Add support for new SN2201 system
platform/surface:
- aggregator: Fix initialization order when compiling as builtin module
- gpe: Add support for Surface Pro 8
platform/x86/dell:
- add buffer allocation/free functions for SMI calls
platform/x86/intel:
- Fix 'rmmod pmt_telemetry' panic
- pmc/core: Use kobj_to_dev()
- pmc/core: change pmc_lpm_modes to static
platform/x86/intel/ifs:
- Add CPU_SUP_INTEL dependency
- add ABI documentation for IFS
- Add IFS sysfs interface
- Add scan test support
- Authenticate and copy to secured memory
- Check IFS Image sanity
- Read IFS firmware image
- Add stub driver for In-Field Scan
platform/x86/intel/sdsi:
- Fix bug in multi packet reads
- Poll on ready bit for writes
- Handle leaky bucket
platform_data/mlxreg:
- Add field for notification callback
pmc_atom:
- dont export pmc_atom_read - no modular users
- remove unused pmc_atom_write()
samsung-laptop:
- use kobj_to_dev()
- Fix an unsigned comparison which can never be negative
stop_machine:
- Add stop_core_cpuslocked() for per-core operations
think-lmi:
- certificate support clean ups
thinkpad_acpi:
- Correct dual fan probe
- Add a s2idle resume quirk for a number of laptops
- Convert btusb DMI list to quirks
tools/power/x86/intel-speed-select:
- Fix warning for perf_cap.cpu
- Display error on turbo mode disabled
- fix build failure when using -Wl,--as-needed
toshiba_acpi:
- use kobj_to_dev()
trace:
- platform/x86/intel/ifs: Add trace point to track Intel IFS operations
winmate-fm07-keys:
- Winmate FM07/FM07P buttons
wmi:
- replace usage of found with dedicated list iterator variable
x86/microcode/intel:
- Expose collect_cpu_info_early() for IFS
x86/msr-index:
- Define INTEGRITY_CAPABILITIES MSR
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmKKlA0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9w0Iwf+PYoq7qtU6j6N2f8gL2s65JpKiSPP
CkgnCzTP+khvNnTWMQS8RW9VE6YrHXmN/+d3UAvRrHsOYm3nyZT5aPju9xJ6Xyfn
5ZdMVvYxz7cm3lC6ay8AQt0Cmy6im/+lzP5vA5K68IYh0fPX/dvuOU57pNvXYFfk
Yz5/Gm0t0C4CKVqkcdU/zkNawHP+2+SyQe+Ua2srz7S3DAqUci0lqLr/w9Xk2Yij
nCgEWFB1Qjd2NoyRRe44ksLQ0dXpD4ADDzED+KPp6VTGnw61Eznf9319Z5ONNa/O
VAaSCcDNKps8d3ZpfCpLb3Rs4ztBCkRnkLFczJBgPsBiuDmyTT2/yeEtNg==
=HdEG
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"This includes some small changes to kernel/stop_machine.c and arch/x86
which are deps of the new Intel IFS support.
Highlights:
- New drivers:
- Intel "In Field Scan" (IFS) support
- Winmate FM07/FM07P buttons
- Mellanox SN2201 support
- AMD PMC driver enhancements
- Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (54 commits)
platform/x86/intel/ifs: Add CPU_SUP_INTEL dependency
platform/x86: intel_cht_int33fe: Set driver data
platform/x86: intel-hid: fix _DSM function index handling
platform/x86: toshiba_acpi: use kobj_to_dev()
platform/x86: samsung-laptop: use kobj_to_dev()
platform/x86: gigabyte-wmi: Add support for Z490 AORUS ELITE AC and X570 AORUS ELITE WIFI
tools/power/x86/intel-speed-select: Fix warning for perf_cap.cpu
tools/power/x86/intel-speed-select: Display error on turbo mode disabled
Documentation: In-Field Scan
platform/x86/intel/ifs: add ABI documentation for IFS
trace: platform/x86/intel/ifs: Add trace point to track Intel IFS operations
platform/x86/intel/ifs: Add IFS sysfs interface
platform/x86/intel/ifs: Add scan test support
platform/x86/intel/ifs: Authenticate and copy to secured memory
platform/x86/intel/ifs: Check IFS Image sanity
platform/x86/intel/ifs: Read IFS firmware image
platform/x86/intel/ifs: Add stub driver for In-Field Scan
stop_machine: Add stop_core_cpuslocked() for per-core operations
x86/msr-index: Define INTEGRITY_CAPABILITIES MSR
x86/microcode/intel: Expose collect_cpu_info_early() for IFS
...
The current descriptions all begin with ("This file shows something")
clause, which is incorrect wording since these mean return value from
sysfs.
Use imperative mood ("Returns something") instead, in line with
corresponding ACPI documentation at firmware-guide/.
Cc: Benson Leung <bleung@google.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220518083524.37380-3-bagasdotme@gmail.com
Stephen Rothwell reported htmldocs warning when merging chrome-platform
tree:
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:2: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:11: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:22: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-chromeos-acpi:56: WARNING: Unexpected indentation.
The warning is due to missing blank line separator surrounding values
lists.
Instead of using lists, use tables to be consistent with rest of sysfs
ABI documentation.
Link: https://lore.kernel.org/linux-next/20220516213832.19127535@canb.auug.org.au/
Fixes: 0a4cad9c11 ("platform/chrome: Add ChromeOS ACPI device driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benson Leung <bleung@google.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220518083524.37380-2-bagasdotme@gmail.com
[tzungbi: fix the Fixes tag to 12-chars hash.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
-----BEGIN PGP SIGNATURE-----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=xqxQ
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Allow runtime services to be re-enabled at boot on RT kernels.
- Provide access to secrets injected into the boot image by CoCo
hypervisors (COnfidential COmputing)
- Use DXE services on x86 to make the boot image executable after
relocation, if needed.
- Prefer mirrored memory for randomized allocations.
- Only randomize the placement of the kernel image on arm64 if the
loader has not already done so.
- Add support for obtaining the boot hartid from EFI on RISC-V.
* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
efi: stub: prefer mirrored memory for randomized allocations
efi/arm64: libstub: run image in place if randomized by the loader
efi: libstub: pass image handle to handle_kernel_image()
efi: x86: Set the NX-compatibility flag in the PE header
efi: libstub: ensure allocated memory to be executable
efi: libstub: declare DXE services table
efi: Add missing prototype for efi_capsule_setup_info
docs: security: Add secrets/coco documentation
efi: Register efi_secret platform device if EFI secret area is declared
virt: Add efi_secret module to expose confidential computing secrets
efi: Save location of EFI confidential computing area
efi: Allow to enable EFI runtime services by default on RT
Add the ability to scrub the device memory with a given value.
Add file 'dram_mem_scrub_val' to set the value
and a file 'dram_mem_scrub' to scrub the dram.
This is very important to help during automated tests, when you want
the CI system to randomize the memory before training certain
DL topologies.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When Gaudi device is secured the monitors data in the configuration
space is blocked from PCI access.
As we need to enable user to get sync-manager monitors registers when
debugging, this patch adds a debugfs that dumps the information to a
binary file (blob).
When a root user will trigger the dump, the driver will send request to
the f/w to fill a data structure containing dump of all monitors
registers.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the sysfs reporting file for Processor MMIO Stale Data
vulnerability. It exposes the vulnerability and mitigation state similar
to the existing files for the other hardware vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
This includes following Thunderbolt/USB4 changes for the v5.19 merge
window:
* Improvements for Thunderbolt 1 DisplayPort tunneling
* Link USB4 ports to their USB Type-C connectors
* Lane bonding support for host-to-host (XDomain) connections
* Buffer allocation improvement for devices with no DisplayPort
adapters
* Few cleanups and minor fixes.
All these have been in linux-next with no reported issues except that
there is a minor merge conflict with the kunit-next tree because one of
the commits touches the driver KUnit tests.
-----BEGIN PGP SIGNATURE-----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=gccx
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.19 merge window
This includes following Thunderbolt/USB4 changes for the v5.19 merge
window:
* Improvements for Thunderbolt 1 DisplayPort tunneling
* Link USB4 ports to their USB Type-C connectors
* Lane bonding support for host-to-host (XDomain) connections
* Buffer allocation improvement for devices with no DisplayPort
adapters
* Few cleanups and minor fixes.
All these have been in linux-next with no reported issues except that
there is a minor merge conflict with the kunit-next tree because one of
the commits touches the driver KUnit tests.
* tag 'thunderbolt-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add KUnit test for devices with no DisplayPort adapters
thunderbolt: Fix buffer allocation of devices with no DisplayPort adapters
thunderbolt: Add support for XDomain lane bonding
thunderbolt: Ignore port locked error in tb_port_wait_for_link_width()
thunderbolt: Split setting link width and lane bonding into own functions
thunderbolt: Move tb_port_state() prototype to correct place
thunderbolt: Add debug logging when lane is enabled/disabled
thunderbolt: Link USB4 ports to their USB Type-C connectors
misc/mei: Add NULL check to component match callback functions
thunderbolt: Use different lane for second DisplayPort tunnel
thunderbolt: Dump path config space entries during discovery
thunderbolt: Use decimal number with port numbers
thunderbolt: Fix typo in comment
thunderbolt: Replace usage of found with dedicated list iterator variable
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmJ6AVoACgkQVZ8R5v6R
zvW6mAf+J9D7EWR4W8YTJwN3Pdmu0tkeYQXg3ThOrDFLnljBOle0j3wOdHdMRR5t
vzn66NfPJIJkugff0diasE07qRZk3ZV7xw+1IZMnHVNCTj4lOyO12jcz/WVIybjl
6klnm/YEXdmtK5Owt01yNIA1GZYRdfmZw2E2hR6T05Pe/ov2wff/CJ6UcHFrb3Es
0AdxQ/kpMhQvOzv53wB6ZYL611mMJMrDtcGb5pOH0LWJYN8nbhvh5JfULKBuyWCb
NsZschX0veYA82OfxhejOiarO6/qKi6cdIfaqzbx26WxfGV2A4Iiqj5UzhTX3sWO
zl0HyVPKtZIWOm3WvygvXR/1tvdMgg==
=6jsl
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next
Manivannan writes:
MHI changes for v5.19
MHI Host
--------
Support for new modems:
- Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
- Telit FN980 v1 based on SDX55
- Telit FN990 based on SDX65
- Foxconn T99W373/T99W368 based on SDX62/SDX65
Core changes:
- During the recycle of event ring elements, compute the ctxt_wp based on the
local cached value instead of reading from shared memory. This is to prevent
the possible corruption of the ctxt_wp as some of the endpoint devices could
modify the value in shared memory.
- Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
spec allows the host to hard reset the device in the case of an unrecoverable
error and all other reset mechanisms have failed.
- During MHI shutdown, wait for the endpoint device to enter the ready state
post reset before proceeding. This is to avoid a possible race where host
would remove the interrupt handler and device will send ready state
interrupt, resulting in IOMMU fault.
- Bail out updating the MHI register if the read has failed during
read/modify/write.
- Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
register fields in mhi_init_mmio().
MAINTAINERS change:
- Since Qualcomm has moved the email domain for its employess from codeaurora
domain to quicinc, update the same for Hemant.
* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
bus: mhi: host: Add support for Foxconn T99W373 and T99W368
bus: mhi: host: pci_generic: add Telit FN990
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
bus: mhi: host: Optimize and update MMIO register write method
bus: mhi: host: Bail on writing register fields if read fails
bus: mhi: host: Wait for ready state after reset
bus: mhi: host: Add soc_reset sysfs
bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
bus: mhi: host: Use cached values for calculating the shared write pointer
MAINTAINERS: Update Hemant's email id
bus: mhi: ep: Add uevent support for module autoloading
bus: mhi: ep: Add support for suspending and resuming channels
bus: mhi: ep: Add support for queueing SKBs to the host
bus: mhi: ep: Add support for processing channel rings
bus: mhi: ep: Add support for reading from the host
bus: mhi: ep: Add support for processing command rings
bus: mhi: ep: Add support for handling SYS_ERR condition
bus: mhi: ep: Add support for handling MHI_RESET
bus: mhi: ep: Add support for powering down the MHI endpoint stack
...
SeongJae is currently listed as a contact point for some blk{back,front}
features, but he will not work for XEN for a while. This commit
therefore updates the contact point to his colleague, Maximilian, who is
understanding the context and actively working with the features now.
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20220420072734.1692-1-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
This commit documents the newly added 'state' sysfs file input keyword,
'commit', which allows online tuning of DAMON contexts.
Link: https://lkml.kernel.org/r/20220429160606.127307-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit documents the user space support of the newly added monitoring
operations set for fixed virtual address ranges monitoring, namely
'fvaddr', on the ABI and usage documents for DAMON.
Link: https://lkml.kernel.org/r/20220426231750.48822-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit updates the DAMON ABI and usage documents for the new sysfs
file, 'avail_operations'.
Link: https://lkml.kernel.org/r/20220426203843.45238-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
Add the sysfs attributes in ABI/testing for In-Field Scan.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220506225410.1652287-12-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add documentation for the new attributes:
- "phy_reset" - Reset PHY.
- "mac_reset" - Reset MAC.
- "qsfp_pwr_good" - The power status of QSFP ports.
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220430115809.54565-4-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
According to the documentation of the sysfs nodes rb_noti_cnt,
rb_active_cnt and rb_inactive_cnt, these are all related to HPB
recommendation in UPIU response packet. 'rcmd' (recommendation) should be
the correct abbreviation.
Change the sysfs documentation about these sysfs nodes to highlight what
they mean under different HPB control modes.
Link: https://lore.kernel.org/r/20220505134707.35929-5-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
IMA may verify a file's integrity against a "good" value stored in the
'security.ima' xattr or as an appended signature, based on policy. When
the "good value" is stored in the xattr, the xattr may contain a file
hash or signature. In either case, the "good" value is preceded by a
header. The first byte of the xattr header indicates the type of data
- hash, signature - stored in the xattr. To support storing fs-verity
signatures in the 'security.ima' xattr requires further differentiating
the fs-verity signature from the existing IMA signature.
In addition the signatures stored in 'security.ima' xattr, need to be
disambiguated. Instead of directly signing the fs-verity digest, a new
signature format version 3 is defined as the hash of the ima_file_id
structure, which identifies the type of signature and the digest.
The IMA policy defines "which" files are to be measured, verified, and/or
audited. For those files being verified, the policy rules indicate "how"
the file should be verified. For example to require a file be signed,
the appraise policy rule must include the 'appraise_type' option.
appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
where 'imasig' is the original or signature format v2 (default),
where 'modsig' is an appended signature,
where 'sigv3' is the signature format v3.
The policy rule must also indicate the type of digest, if not the IMA
default, by first specifying the digest type:
digest_type:= [verity]
The following policy rule requires fsverity signatures. The rule may be
constrained, for example based on a fsuuid or LSM label.
appraise func=BPRM_CHECK digest_type=verity appraise_type=sigv3
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Permit fsverity's file digest (a hash of struct fsverity_descriptor) to
be included in the IMA measurement list, based on the new measurement
policy rule 'digest_type=verity' option.
To differentiate between a regular IMA file hash from an fsverity's
file digest, use the new d-ngv2 format field included in the ima-ngv2
template.
The following policy rule requires fsverity file digests and specifies
the new 'ima-ngv2' template, which contains the new 'd-ngv2' field. The
policy rule may be constrained, for example based on a fsuuid or LSM
label.
measure func=FILE_CHECK digest_type=verity template=ima-ngv2
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>