Include kernel.h for GENMASK(), kstrtobool() and types.
Add forward declaration for struct adf_accel_dev. Remove unneeded
include.
This change doesn't introduce any function change.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add hw_random interface support in qcom-rng driver as new IP block
in Qualcomm SoC has inbuilt NIST SP800 90B compliant entropic source
to generate true random number.
Keeping current rng_alg interface as well for random number generation
using Kernel Crypto API.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create CRYPTO_QAT namespace for symbols exported by the qat_common
module and import those in the QAT drivers. It will reduce the global
namespace crowdedness and potential misuse or the API.
This does not introduce any functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the implementation of zlib-deflate because it is completely
unused in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
When the Kunpeng accelerator executes tasks such as encryption
and decryption have minimum requirements on the number of device
queues. If the number of queues does not meet the requirement,
the process initialization will fail. Therefore, the driver checks
the number of queues on the device before registering the algorithm.
If the number does not meet the requirements, the driver does not register
the algorithm to crypto subsystem, the device is still added to the
qm_list.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The type of aeq has only 4bits in dw0 17 to 20bits, but 15bits(17 to
31bits) are read in function qm_aeq_thread(). The remaining 11bits(21
to 31bits) are reserved for aeq, but may not be 0. To avoid getting
incorrect value of type, other bits are cleared.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.
After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.
Fixes: 8bbecfb402 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Returning an error code in the remove function of a platform device has
no effect (compared to returning zero) apart from an error message, that
the error is ignored. Then the device is removed irrespective of the
returned value.
As kmb_ocs_hcu_remove is only called after kmb_ocs_hcu_probe() returned
successfully, platform_get_drvdata() never returns NULL and so the
respective check can just be dropped.
crypto_engine_exit() might return an error code but already emits an
error message in that case, so better return zero in
kmb_ocs_hcu_remove() even in this case to suppress another error
message. All other crypto drivers also ignore the return value of
crypto_engine_exit().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct adf_fw_counters.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Adam Guerin <adam.guerin@intel.com>
Cc: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: qat-linux@intel.com
Cc: linux-crypto@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.
This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:
drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
drivers/crypto/intel/qat/qat_common/adf_transport_debug.c💯60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]
Fixes: a672a9dc87 ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.
fix this by memcpy the key in caam_ctx key arrary
Fixes: d6bbd4eea2 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.
fix this by memcpy the key in caam_ctx key arrary
Fixes: c10a533679 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When sec_aead_mac_init returns an error code, sec_cipher_map
will exit abnormally, the hardware sgl should be unmmaped.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.
Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.
When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.
As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The data structure that associates a service id with its name is
replicated across the driver.
Remove duplication by moving this data structure to a new include file,
adf_cfg_services.h in order to have consistency across the drivers.
Note that the data structure is re-instantiated every time the new
include is added to a compilation unit.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init(), through the subsystem qat_compression,
populates the list of list of compression instances
accel_dev->compression_list. If the list of instances is not empty,
the function adf_dev_start() will then call qat_compression_registers()
register the compression algorithms into the crypto framework.
If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of compression algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_compression.c to get
to a negative value.
Add a new state, ADF_STATUS_COMPRESSION_ALGS_REGISTERED, which tracks
if the compression algorithms are registered into the crypto framework.
Then use this to unregister the algorithms if such flag is set. This
ensures that the compression algorithms are only unregistered if
previously registered.
Fixes: 1198ae56c9 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.
If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.
Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.
Fixes: d8cba25d2c ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the device is already in the up state, a subsequent write of `up` to
the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/state brings the
device down.
Fix this behaviour by ignoring subsequent `up` commands if the device is
already in the up state.
Fixes: 1bdc85550a ("crypto: qat - fix concurrency issue when device state changes")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not shadow the return code from adf_dev_down() in the error path of
the DEV_DOWN command.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 1bdc85550a ("crypto: qat - fix concurrency issue when device
state changes") introduced the function adf_dev_down() which wraps the
functions adf_dev_stop() and adf_dev_shutdown().
In a subsequent change, the sequence adf_dev_stop() followed by
adf_dev_shutdown() was then replaced across the driver with just a call
to the function adf_dev_down().
The functions adf_dev_stop() and adf_dev_shutdown() are called in error
paths to stop the accelerator and free up resources and can be called
even if the counterparts adf_dev_init() and adf_dev_start() did not
complete successfully.
However, the implementation of adf_dev_down() prevents the stop/shutdown
sequence if the device is found already down.
For example, if adf_dev_init() fails, the device status is not set as
started and therefore a call to adf_dev_down() won't be calling
adf_dev_shutdown() to undo what adf_dev_init() did.
Do not check if a device is started in adf_dev_down() but do the
equivalent check in adf_sysfs.c when handling a DEV_DOWN command from
the user.
Fixes: 2b60f79c7b ("crypto: qat - replace state machine calls")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the support of zlib-deflate and gzip.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the deflate algorithm support for hisilicon zip hardware.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On some SOCs DBC is supported through the PSP mailbox instead of
the platform mailbox. This capability is advertised in the PSP
capabilities register. Allow using this communication path if
supported.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offsets are checked by the capabilities register in multiple places.
To make the code more readable add a macro.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
DBC is currently accessed only from the platform access mailbox and
a lot of that implementation's communication path is intertwined
with DBC. Add an abstraction layer for pointers into the mailbox.
No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP mailbox supports a number of extended sub-commands. These
subcommands are placed in the header of the buffer sent to the mailbox.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the PSP mailbox registers supporting more than just TEE, access to
them must be maintained and serialized by the PSP device support. Remove
TEE support direct access and create an interface in the PSP support
where the register access can be controlled/serialized.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Tested-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This error handling looks really strange.
Check if the string has been truncated instead.
Fixes: 02ab994635 ("crypto: hisilicon - Fixed some tiny bugs of HPRE")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve AES/XTS performance of 6-way unrolling for PowerPC up
to 17% with tcrypt. This is done by using one instruction,
vpermxor, to replace xor and vsldoi.
The same changes were applied to OpenSSL code and a pull request was
submitted.
This patch has been tested with the kernel crypto module tcrypt.ko and
has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert list_for_each() to list_for_each_entry() so that the list_itr
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dbc_dev_init() gets a free page from `GFP_KERNEL`, but if that page has
any data in it the first nonce request will fail.
This prevents dynamic boost control from probing. To fix this, explicitly
request a zeroed page with `__GFP_ZERO` to ensure first nonce fetch works.
Fixes: c04cf9e14f ("crypto: ccp - Add support for fetching a nonce for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
API:
- Move crypto engine callback from tfm ctx into algorithm object.
- Fix atomic sleep bug in crypto_destroy_instance.
- Move lib/mpi into lib/crypto.
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10.
Drivers:
- Add AES skcipher and aead support to starfive.
- Add Dynamic Boost Control support to ccp.
- Add support for STM32P13 platform to stm32.
-----BEGIN PGP SIGNATURE-----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=LbcA
-----END PGP SIGNATURE-----
Merge tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
- Add vfio-ap support to pass-through crypto devices to secure execution
guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is not
possible to figure where a system has been booted from. Existing user
space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmTrqNYACgkQIg7DeRsp
bsKkUBAApWXr3WCJA2tige34AnFwmskx4sBxl/fgwcwJrC55fED1jKWaiXOM6isv
P+hqavZnks3gXZdYcD3kxXkNMh+fPNWw7BAL35J5Gu1VShA/jlbTC6ZrvUO3t+Fy
NsdLvBDbNDdyUzQF7w0Xb0jyIxqhJTRyhLfR5oXES63FHomv2F/vofu4jWR/q+cc
F9mcnoDeN4zLdssdvl6WtPX4nEY9RpG0QOh67drnxuq+8v7sL8gKN4ti94Rp6vhs
g4NhNs9xgRIPoOcX2KlSIdFqO9P12jSXZq0G4HcOp8UGQvgU/mS+UG3pQwV3ZJLS
3/kUJZ4/CwQa1xUFtPGP1/4AngGNOnhT9FCD4KrqjDkRZmLsd5RvURe6L1zQ3vbZ
KnX7q0Otx4xRVYPlbHb9aP+tC7f3Q10ytBAps616qZoA/2SMss2BLZiiPBpCCvDp
L+9dRhBGYCP2PSe6H/qGQFfMW+uY7QF+NDcDAT5mX1lS8OVrGJxqM7Q+sY2pMLGo
5nR16LvM9g6W/ZnsVn0+BWg4CgaPMi+PMfMPxs/o9RG+/0d1AJx1aLSiHdP1pXog
8/Wg4GaaJ27S4Ers0JUmH7VDO+QkkLvAArstjk8l59r1XslWiBP5USebkxtgu6EQ
ehAh0+oa432ALq8Rn1FK/X+pWFumbTVf8OPwR8YEjDbeTPIBCqg=
=ewd9
-----END PGP SIGNATURE-----
Merge tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add vfio-ap support to pass-through crypto devices to secure
execution guests
- Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
required to handle key generate and key derive (e.g. secure key to
protected key) correctly
- Add missing secure/has_secure sysfs files for the case where it is
not possible to figure where a system has been booted from. Existing
user space relies on that these files are always present
- Fix DCSS block device driver list corruption, caused by incorrect
error handling
- Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
functions to enforce type checking
- Cleanups, improvements, and minor fixes to the kernel mapping setup
- Fix various virtual vs physical address confusions
- Move pfault code to separate file, since it has nothing to do with
regular fault handling
- Move s390 documentation to Documentation/arch/ like it has been done
for other architectures already
- Add HAVE_FUNCTION_GRAPH_RETVAL support
- Factor out the s390_hypfs filesystem and add a new config option for
it. The filesystem is deprecated and as soon as all users are gone it
can be removed some time in the not so near future
- Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
driver
- Add support for user-defined certificates: receive user-defined
certificates with a diagnose call and provide them via 'cert_store'
keyring to user space
- Couple of other small fixes and improvements all over the place
* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390/pci: use builtin_misc_device macro to simplify the code
s390/vfio-ap: make sure nib is shared
KVM: s390: export kvm_s390_pv*_is_protected functions
s390/uv: export uv_pin_shared for direct usage
s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
s390/vfio-ap: handle queue state change in progress on reset
s390/vfio-ap: use work struct to verify queue reset
s390/vfio-ap: store entire AP queue status word with the queue object
s390/vfio-ap: remove upper limit on wait for queue reset to complete
s390/vfio-ap: allow deconfigured queue to be passed through to a guest
s390/vfio-ap: wait for response code 05 to clear on queue reset
s390/vfio-ap: clean up irq resources if possible
s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
s390/ipl: refactor deprecated strncpy
s390/ipl: fix virtual vs physical address confusion
s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
...
These declarations are not implemented now, remove them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When extending the capability detection logic for 4xxx devices the
SMx algorithms were accidentally missed.
Enable these SMx capabilities by default for QAT GEN4 devices.
Check for device variants where the SMx algorithms are explicitly
disabled by the GEN4 hardware. This is indicated in fusectl1
register.
Mask out SM3 and SM4 based on a bit specific to those algorithms.
Mask out SM2 if the PKE slice is not present.
Fixes: 4b44d28c71 ("crypto: qat - extend crypto capability detection for 4xxx")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Algorithms must never be added to a driver unless there is a generic
implementation. These truncated versions of sha512 slipped through.
Remove them as they are useless.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The header file jh7110-cryp uses ahash_request without including
crypto/hash.h. Fix that by adding the inclusion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callbacks for prepare and unprepare request in crypto_engine
is superfluous. They can be done directly from do_one_request.
Move the code into do_one_request and remove the unused callbacks.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some newer SoCs (like SM8450) do not require a clock vote for the PRNG
to function. Make it entirely optional and rely on the bindings checker
to ensure platforms that need it, consume one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some configurations with gcc-12 or gcc-13 produce a warning for the source
and destination of a memcpy() in atmel_sha_hmac_compute_ipad_hash() potentially
overlapping:
In file included from include/linux/string.h:254,
from drivers/crypto/atmel-sha.c:15:
drivers/crypto/atmel-sha.c: In function 'atmel_sha_hmac_compute_ipad_hash':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing 129 or more bytes at offsets 408 and 280 overlaps 1 or more bytes at offset 408 [-Werror=restrict]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy'
648 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk'
693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/crypto/atmel-sha.c:1773:9: note: in expansion of macro 'memcpy'
1773 | memcpy(hmac->opad, hmac->ipad, bs);
| ^~~~~~
The same thing happens in two more drivers that have the same logic:
drivers/crypto/chelsio/chcr_algo.c: In function 'chcr_ahash_setkey':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing 129 or more bytes at offsets 260 and 132 overlaps 1 or more bytes at offset 260 [-Werror=restrict]
drivers/crypto/bcm/cipher.c: In function 'ahash_hmac_setkey':
include/linux/fortify-string.h:57:33: error: '__builtin_memcpy' accessing between 129 and 4294967295 bytes at offsets 840 and 712 overlaps between 1 and 4294967167 bytes at offset 840 [-Werror=restrict]
I don't think it can actually happen because the size is strictly bounded
to the available block sizes, at most 128 bytes, though inlining decisions
could lead gcc to not see that.
Use the unsafe_memcpy() helper instead of memcpy(), with the only difference
being that this skips the hardening checks that produce the warning.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
exynos-rng.c:280:14: error: cast to smaller integer type 'enum exynos_prng_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are cases when the interrupt status register (JRINTR) is non-zero,
even though:
1. An interrupt was generated, but it was masked OR
2. There was no interrupt generated at all
for the corresponding job ring.
1. The case when interrupt is masked (JRCFGR_LS[IMSK]=1b'1)
while other events have happened and are being accounted for, e.g.
-JRINTR[HALT]=2b'10 - input job ring underwent a flush of all on-going
jobs and processing of still-existing jobs (sitting in the ring) has been
halted
-JRINTR[HALT]=2b'01 - input job ring is currently undergoing a flush
-JRINTR[ENTER_FAIL]=1b'1 - SecMon / SNVS transitioned to FAIL MODE
It doesn't matter whether these events would assert the interrupt signal
or not, interrupt is anyhow masked.
2. The case when interrupt is not masked (JRCFGR_LS[IMSK]=1b'0), however
the events accounted for in JRINTR do not generate interrupts, e.g.:
-JRINTR[HALT]=2b'01
-JRINTR[ENTER_FAIL]=1b'1 and JRCFGR_MS[FAIL_MODE]=1b'0
Currently in these cases, when the JR interrupt handler is invoked (as a
consequence of JR sharing the interrupt line with other devices - e.g.
the two JRs on i.MX7ULP) it continues execution instead of returning
IRQ_NONE.
This could lead to situations like interrupt handler clearing JRINTR (and
thus also the JRINTR[HALT] field) while corresponding job ring is
suspended and then that job ring failing on resume path, due to expecting
JRINTR[HALT]=b'10 and reading instead JRINTR[HALT]=b'00.
Fix this by checking status of JRINTR[JRI] in the JR interrupt handler.
If JRINTR[JRI]=1b'0, there was no interrupt generated for this JR and
handler must return IRQ_NONE.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam_jr_enqueue, under heavy DDR load, smp_wmb() or dma_wmb()
fail to make the input ring be updated before the CAAM starts
reading it. So, CAAM will process, again, an old descriptor address
and will put it in the output ring. This will make caam_jr_dequeue()
to fail, since this old descriptor is not in the software ring.
To fix this, use wmb() which works on the full system instead of
inner/outer shareable domains.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The newly added PM operations use the deprecated SIMPLE_DEV_PM_OPS() macro,
causing a warning in some configurations:
drivers/crypto/caam/ctrl.c:828:12: error: 'caam_ctrl_resume' defined but not used [-Werror=unused-function]
828 | static int caam_ctrl_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/crypto/caam/ctrl.c:818:12: error: 'caam_ctrl_suspend' defined but not used [-Werror=unused-function]
818 | static int caam_ctrl_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:732:12: error: 'caam_jr_resume' defined but not used [-Werror=unused-function]
732 | static int caam_jr_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/crypto/caam/jr.c:687:12: error: 'caam_jr_suspend' defined but not used [-Werror=unused-function]
687 | static int caam_jr_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Use the normal DEFINE_SIMPLE_DEV_PM_OPS() variant now, and use pm_ptr() to
completely eliminate the structure in configs without CONFIG_PM.
Fixes: 322d74752c ("crypto: caam - add power management support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit ce753ad154 ("platform: finally disallow IRQ0 in
platform_get_irq() and its ilk"), there is no possible for
platform_get_irq() to return 0. Use the return value
from platform_get_irq().
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use kfree_sensitive() instead of memset() and kfree().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
stm32_hash_remove() is only called after stm32_hash_probe() succeeded. In
this case platform_set_drvdata() was called with a non-NULL data patameter.
The check for hdev being non-NULL can be dropped because hdev is never NULL
(or something bad like memory corruption happened and then the check
doesn't help any more either).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().
Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.
Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.
Fixes: 8b4d566de6 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kzalloc() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.
Fixes: e22471c233 ("crypto: starfive - Add AES skcipher and aead support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible that dma_request_chan will return EPROBE_DEFER,
which means that dd->dev is not ready yet. In this case,
dev_err(dd->dev), there will be no output. This patch fixes the bug.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for suspend and resume operation for PM in CAAM driver.
When the CAAM goes in suspend, the hardware is considered to do nothing.
On some platforms, the power of the CAAM is not turned off so it keeps
its configuration.
On other platforms, it doesn't so it is necessary to save the state of
the CAAM:
- JRs MID
- Address of input and output rings
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The structure partid is not suitable to represent the DECO MID register.
This patch replace partid by masterid which is more appropriate.
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On memory allocation failure, the function calling stack is already logged.
So there is no need to explicitly log an extra message.
Remove them, ans simplify some code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use struct_size() instead of hand-writing it, when allocating a structure
with a flex array.
This is less verbose, more robust and more informative.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adding AES skcipher and aead support to Starfive crypto module.
Skcipher modes of operation include ecb, cbc, ctr, ofb, cfb. Aead modes
include ccm and gcm.
v1->v2:
- Add include interrupt.h to fix compile error. (Herbert)
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the legacy device driver code for CEX2 and CEX3 cards.
The last machines which are able to handle CEX2 crypto cards
are z10 EC first available 2008 and z10 BC first available 2009.
The last machines able to handle a CEX3 crypto card are
z196 first available 2010 and z114 first available 2011.
Please note that this does not imply to drop CEX2 and CEX3
support in general. With older kernels on hardware up to the
aforementioned machine models these crypto cards will get
support by IBM.
The removal of the CEX2 and CEX3 device drivers code opens up
some simplifications, for example support for crypto cards
without rng support can be removed also.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Enable sva error interrupt event. When an error occurs on
the sva module, the device reports an abnormal interrupt to
the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When both the accelerator device and SMMU are busy,
the processing time of the doorbell may be prolonged.
As a result, the doorbell may timeout, especially in the sva
scenario. Therefore, the doorbell timeout is increased.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the system is shut down, the process is killed, but the
accelerator device does not stop executing the tasks. If the
accelerator device still accesses the memory and writes back data
to the memory after the memory is reclaimed by the system,
an NFE error may occur. Therefore, before the system is shut
down, the driver needs to stop the device and write data back
to the memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before removing the driver, flush inter-function communication
work, and subsequent communication work is not processed.
This prevents communication threads from accessing released memory.
Fixes: ("crypto: hisilicon/qm - enable PF and VFs communication")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove flag HASH_FLAGS_DMA_READY as it can put the driver in a deadlock
state.
If the DMA automatically set the DCAL bit, the interrupt indicating the
end of a computation can be raised before the DMA complete sequence.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If IP has MDMAT support, set or reset the bit MDMAT in Control Register.
Fixes: b56403a25a ("crypto: stm32/hash - Support Ux500 hash")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When we are sending the data to HASH with the DMA, we send all the data
provided in the scatterlists of the request.
But in some cases (ex : tcrypt performances tests), we should only send
req->nbytes
When iterating through the scatterlist we verify if it is the last
scatterlist or if the number of bytes sent plus the data of the current
scatterlist is superior of the total number of bytes to hash.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.
Fixes : 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit "crypto: stm32 - Fix empty message processing" remove the use of
the argument bufcnt in stm32_hash_write_ctrl.
Hence, we can remove it from the function prototype and simplify the
function declaration.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the all SHA-2 (up to 512) and SHA-3 algorithm support.
Update compatible table to add stm32mp13.
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The private key of the curve key size generated by stdrng, which maybe
not less than n. Therefore, the private key with the curve key size
minus 1 is generated to ensure that the private key is less than n.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark UWORD_CPYBUF_SIZE with U suffix to make its type the same
with words_num. Then replace the if statement with min() in
qat_uclo_wr_uimage_raw_page() to make code shorter.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: You Kangren <youkangren@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A firmware update for QAT GEN2 changed the format of a data
structure used to report the heartbeat counters.
To support all firmware versions, extend the heartbeat logic
with an algorithm that detects the number of counters returned
by firmware. The algorithm detects the number of counters to
be used (and size of the corresponding data structure) by the
comparison the expected size of the data in memory, with the data
which was written by the firmware.
Firmware detection is done one time during the first read of heartbeat
debugfs file to avoid increasing the time needed to load the module.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Under some circumstances, firmware in the QAT devices could become
unresponsive. The Heartbeat feature provides a mechanism to detect
unresponsive devices.
The QAT FW periodically writes to memory a set of counters that allow
to detect the liveness of a device. This patch adds logic to enable
the reporting of those counters, analyze them and report if a device
is alive or not.
In particular this adds
(1) heartbeat enabling, reading and detection logic
(2) reporting of heartbeat status and configuration via debugfs
(3) documentation for the newly created sysfs entries
(4) configuration of FW settings related to heartbeat, e.g. tick period
(5) logic to convert time in ms (provided by the user) to clock ticks
This patch introduces a new folder in debugfs called heartbeat with the
following attributes:
- status
- queries_sent
- queries_failed
- config
All attributes except config are reading only. In particular:
- `status` file returns 0 when device is operational and -1 otherwise.
- `queries_sent` returns the total number of heartbeat queries sent.
- `queries_failed` returns the total number of heartbeat queries failed.
- `config` allows to adjust the frequency at which the firmware writes
counters to memory. This period is given in milliseconds and it is
fixed for GEN4 devices.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT hardware does not expose a mechanism to report its clock
frequency. This is required to implement the Heartbeat feature.
Add a clock measuring algorithm that estimates the frequency by
comparing the internal timestamp counter incremented by the firmware
with the time measured by the kernel.
The frequency value is only used internally and not exposed to
the user.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop legacy heartbeat interface from FW API as it is no longer used.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The power management feature in QAT 4xxx devices can disable clock
sources used to implement timers. Because of that, the firmware needs to
get an external reliable source of time.
Add a kernel delayed work that periodically sends an event to the
firmware. This is triggered every 200ms. At each execution, the driver
sends a sync request to the firmware reporting the current timestamp
counter value.
This is a pre-requisite for enabling the heartbeat, telemetry and
rate limiting features.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose FW counters statistics by providing the "fw_counters" file
under debugfs. Currently the statistics include the number of
requests sent to the FW and the number of responses received
from the FW for each Acceleration Engine, for all the QAT product
line.
This patch is based on earlier work done by Marco Chiappero.
Co-developed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After software has authenticated a dynamic boost control request,
it can fetch and set supported parameters using a selection of messages.
Add support for these messages and export the ability to do this to
userspace.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As part of the authentication flow for Dynamic Boost Control, the calling
software will need to send a uid used in all of its future
communications.
Add support for another IOCTL call to let userspace software set this up.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dynamic Boost Control is a feature offered on AMD client platforms that
allows software to request and set power or frequency limits.
Only software that has authenticated with the PSP can retrieve or set
these limits.
Create a character device and ioctl for fetching the nonce. This ioctl
supports optionally passing authentication information which will influence
how many calls the nonce is valid for.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dynamic boost control needs to use platform access symbols
that look for the PSP master as part of initialization.
So move the PSP master before psp_init() so that dynamic boost
control can be initialized properly.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bootloader and TEE versions are stored in registers that can be
accessed from sysfs. This exports the information for recent client
and datacenter parts.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it's not always obvious what PSP bootloader or TEE version are
present in OEM systems, add the ability to get this information from
sysfs for supported platforms.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The attribute_show() macro is only valid for determining the availability
of security related sysfs entries. Rename the macro to better show this
relationship.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The power management configuration of 4xxx devices is too aggressive
and in some conditions the device might be prematurely put to a low
power state.
Increase the idle filter value to prevent that.
In future, this will be set by firmware.
Fixes: e5745f3411 ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fix virtual vs physical address confusion in vmem_add_range()
and vmem_remove_range() functions.
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code.
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that.
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol
is not resolved. Add undefined symbols check to prevent that.
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL.
- Add -fPIE flag to prevent decompressor misaligned symbol build
error with clang.
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore.
- Filter out -mno-pic-data-is-text-relative flag when compiling
kernel to prevent VDSO build error.
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly.
- Do not retry administrative requests to some s390 crypto cards,
since the firmware assumes replay attacks.
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled.
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver.
- With the conversion to generic entry machine checks are accounted
to the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it.
- Fix various typos found with codespell.
- Minor cleanups to CPU-measurement Counter and Sampling Facilities code.
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes
a regression.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZKakSBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8HeIAQCg9RX3/olsZhCqRNLZ/O+6FXAF
29ohi2JmVqxJBKkmwgEA/QXCjoTOp41pQJ1FD39HnI8DeYpJFRnYYE5D3acibAw=
=2Ykk
-----END PGP SIGNATURE-----
Merge tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL
- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore
- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly
- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver
- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it
- Fix various typos found with codespell
- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression
* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...
resume support in vdpa/solidrun
structure size optimizations in virtio_pci
new pds_vdpa driver
immediate initialization mechanism for vdpa/ifcvf
interrupt bypass for vdpa/mlx5
multiple worker support for vhost
viirtio net in Intel F2000X-PL support for vdpa/ifcvf
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSi95cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpJ58H/A++mwjLsoiJ/3xgf2S2Fn0p0lkgxg61LrjD
Q9p8zstG/BndRvv018XcJKoklaHpb4WcmNctKRNZJ6BjPj+ZwdADuSzoaUNurPD4
M3s/nXVWvg7/2FifGDpCzQpyw0MR0Ip6/yqtdTl4vuLZGxI1nNGDfYbDgc3vZeCp
pYTLsl/XUPzix4iJouEQqy5rmlUia3IE751aECrdk58z17lDo/Znar4hsXF0acQY
+G6C/MNZQgf1rtJIl901h54W8rAoubxeda80uXSQk9fDyPG/wZYh2wFBGPi9qYa+
9E+tOgHprMZ7G5GEopDdd19UctuW7M+YXPWZa1ijp8EZXmMpzuo=
=5tdF
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb510439 ("virtio_net: suppress cpu stall
when free_unused_bufs").
This driver is similar so theoretically the same logic applies.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230609131817.712867-2-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove ZCRYPT_MULTIDEVNODES kernel config option and make
the dependent code always build.
The last years showed, that this option is enabled on all distros
and exploited by some features (for example CEX plugin for kubernetes).
So remove this choice as it was never used to switch off the multiple
devices support for the zcrypt device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
API:
- Add linear akcipher/sig API.
- Add tfm cloning (hmac, cmac).
- Add statesize to crypto_ahash.
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA.
- Replace LFSR with SHA3-256 in jitter.
- Add interface for gathering of raw entropy in jitter.
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio.
- Add hash and HMAC support in starfive.
- Add RSA algo support in starfive.
- Add support for PCI device 0x156E in ccp.
-----BEGIN PGP SIGNATURE-----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=rOLu
-----END PGP SIGNATURE-----
Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add linear akcipher/sig API
- Add tfm cloning (hmac, cmac)
- Add statesize to crypto_ahash
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA
- Replace LFSR with SHA3-256 in jitter
- Add interface for gathering of raw entropy in jitter
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio
- Add hash and HMAC support in starfive
- Add RSA algo support in starfive
- Add support for PCI device 0x156E in ccp"
* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
crypto: akcipher - Do not copy dst if it is NULL
crypto: sig - Fix verify call
crypto: akcipher - Set request tfm on sync path
crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
hwrng: st - keep clock enabled while hwrng is registered
hwrng: st - support compile-testing
hwrng: imx-rngc - fix the timeout for init and self check
KEYS: asymmetric: Use new crypto interface without scatterlists
KEYS: asymmetric: Move sm2 code into x509_public_key
KEYS: Add forward declaration in asymmetric-parser.h
crypto: sig - Add interface for sign/verify
crypto: akcipher - Add sync interface without SG lists
crypto: cipher - On clone do crypto_mod_get()
crypto: api - Add __crypto_alloc_tfmgfp
crypto: api - Remove crypto_init_ops()
crypto: rsa - allow only odd e and restrict value in FIPS mode
crypto: geniv - Split geniv out of AEAD Kconfig option
crypto: algboss - Add missing dependency on RNG2
crypto: starfive - Add RSA algo support
...
* Support for ACPI.
* Various cleanups to the ISA string parsing, including making them
case-insensitive
* Support for the vector extension.
* Support for independent irq/softirq stacks.
* Our CPU DT binding now has "unevaluatedProperties: false"
-----BEGIN PGP SIGNATURE-----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=Fpq8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for ACPI
- Various cleanups to the ISA string parsing, including making them
case-insensitive
- Support for the vector extension
- Support for independent irq/softirq stacks
- Our CPU DT binding now has "unevaluatedProperties: false"
* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
riscv: hibernate: remove WARN_ON in save_processor_state
dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
dt-bindings: riscv: cpus: add a ref the common cpu schema
riscv: stack: Add config of thread stack size
riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
RISC-V: always report presence of extensions formerly part of the base ISA
dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
RISC-V: remove decrement/increment dance in ISA string parser
RISC-V: rework comments in ISA string parser
RISC-V: validate riscv,isa at boot, not during ISA string parsing
RISC-V: split early & late of_node to hartid mapping
RISC-V: simplify register width check in ISA string parsing
perf: RISC-V: Limit the number of counters returned from SBI
riscv: replace deprecated scall with ecall
riscv: uprobes: Restore thread.bad_cause
riscv: mm: try VMA lock-based page fault handling first
riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
...
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSdmbIACgkQYKtH/8kJ
UicewQ/6Aq8j5pBFYBimZoyQ0bi9z+prGrHoDDYLew2vKjtOXJl5z7ZnM3J1oyPt
Zvis3IaGkHJCuuqotPdsquZrzHq8slzXzwkHPfHORJBC4gV0V/vMS8w32tO5FfTq
ULrMyWnbsU7Udeywc2xuEpAoC9+bXX9brnCpa3H41peIGZKM+0g7EE6FASt3YaOk
O+ZMSGqF8QbCqSQrUH3GudFlFMy/VxIvwuUsbLt8aNkRACunQZXVgUdArvLV49nX
SElFN7hOVRoVDv0rgYMxlwElymrta/kMyjLba8GU1GIhzyDGozVqIJQAnsQ3f6CC
yyzaJm27zzJH0mx9jx4W+JLBdjqDL4ctE2WyllRVIpTGYMHiMQtutHNwtNupIuD5
j9j/fIVQWZqOdWXnA6V/CHYN1MZBRTH3KQcnLlYPC01dWKThPDnrHGfwOkfsrwtN
zuERJJ+gd5b8KW4dmy1ueDOSB8162LxbS7iHxpOBGySmqVOYj3XUqACZhKRfXfIQ
BVj9punCE/gO2fMb9IZByjeOzgtV+PBRmPxoglyaGkT4fVfL06kEbpKFYbXXq9b/
aAS/U84gGr8ebWsOXszwDnBzTZRzjMVv/T9KDTTJuWbBEPNyCR7fUG0cZ50rSKnJ
2cTPe3a0sS6LaBt71qfExCIfxG+cJ2c3N1U5/jb2C49Aob45obs=
=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
For historical reasons, unbound workqueues with max concurrency limit of 1
are considered ordered, even though the concurrency limit hasn't been
system-wide for a long time. This creates ambiguity around whether ordered
execution is actually required for correctness, which was actually confusing
for e.g. btrfs (btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and there
are pending improvements to unbound workqueue affinity handling which will
make inadvertent use of ordered workqueue a bigger loss. This pull request
clarifies the situation for most of them by updating the ones which require
ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific trees and
likely a few stragglers. Once they're all converted, workqueue can trigger a
warning on unbound + @max_active==1 usages and eventually drop the implicit
ordered behavior.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJoKnA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGc5SAQDOtjML7Cx9AYzbY5+nYc0wTebRRTXGeOu7A3Xy
j50rVgEAjHgvHLIdmeYmVhCeHOSN4q7Wn5AOwaIqZalOhfLyKQk=
=hs79
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
Adding RSA enc/dec and sign/verify feature for StarFive cryptographic
module. The module only supports mod sizes up to 2048, therefore
calculations more than that will use fallback algo.
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hash driver needs to check the value of irq mask register before writing
as it will mask irq of other modules.
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
TRNG "sample size" (the total number of entropy samples that will be taken
during entropy generation) default / POR value is very conservatively
set to 2500.
Let's set it to 512, the same as the caam driver in U-boot
(drivers/crypto/fsl_caam.c) does.
This solves the issue of RNG performance dropping after a suspend/resume
cycle on parts where caam loses power, since the initial U-boot setttings
are lost and kernel does not restore them when resuming.
Note: when changing the sample size, the self-test parameters need to be
updated accordingly.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAAM includes a Random Number Generator. This change adds
a kernel configuration option to test the RNG's capabilities via the
hw_random framework.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_init_admin_pm() is not used outside of the intel_qat
module.
Do not export it.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the recently added of_property_read_reg() helper to get the
untranslated "reg" address value.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose 'pm_idle_enabled' sysfs attribute. This attribute controls how
idle conditions are handled. If it is set to 1 (idle support enabled)
when the device detects an idle condition, the driver will transition
the device to the 'MIN' power configuration.
In order to set the value of this attribute for a device, the device
must be in the 'down' state.
This only applies to qat_4xxx generation.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A QAT GEN4 device can be currently configured for crypto (sym;asym) or
compression (dc).
This patch extends the configuration to support more variations of these
services, download the correct FW images on the device and report the
correct capabilities on the device based on the configured service.
The device can now be configured with the following services:
"sym", "asym", "dc", "sym;asym", "asym;sym", "sym;dc", "dc;sym",
"asym;dc", "dc;asym".
With this change, the configuration "sym", "asym", "sym;dc", "dc;sym",
"asym;dc", "dc;asym" will be accessible only via userspace, i.e. the driver
for those configurations will not register into the crypto framework.
Support for such configurations in kernel will be enabled in a later
patch.
The pairs "sym;asym" and "asym;sym" result in identical device config.
As do "sym;dc", "dc;sym", and "asym;dc", "dc;asym".
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The data structure adf_fw_config is used to select which firmware image
is loaded on a certain set of accelerator engines.
When support for 402xx was added, the adf_fw_config arrays were
duplicated in order to select different firmware images.
Since the configurations are the same regardless of the QAT GEN4
flavour, in preparation for adding support for multiple configurations,
refactor the logic that retrieves the firmware names in the 4xxx driver.
The structure adf_fw_config has been changed to contain a firmware object
id that is then mapped to a firmware name depending of the device type.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update fw image names to be constant throughout the driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make use of the default statements by changing the pattern:
switch(condition) {
case COND_A:
...
break;
case COND_b:
...
break;
}
return ret;
in
switch(condition) {
case COND_A:
...
break;
case COND_b:
...
break;
default:
return ret;
}
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback function for RSA frees the memory allocated for the source
and destination buffers before unmapping them.
This sequence is wrong.
Change the cleanup sequence to unmap the buffers before freeing them.
Fixes: 3dfaf0071e ("crypto: qat - remove dma_free_coherent() for RSA")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback function for DH frees the memory allocated for the
destination buffer before unmapping it.
This sequence is wrong.
Change the cleanup sequence to unmap the buffer before freeing it.
Fixes: 029aa4624a ("crypto: qat - remove dma_free_coherent() for DH")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Arm documentation has moved to Documentation/arch/arm; update a
set of references under crypto/allwinner to match.
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update slice mask enum for 4xxx device with BIT(7) to mask SMX fuse.
This change is done to align the slice mask with the hardware fuse
register.
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The LZS and RAND features are no longer available on QAT.
Remove the definition of bit 6 (LZS) and bit 7 (RAND) in the enum that
represents the capabilities and replace them with a comment mentioning
that those bits are reserved.
Those bits shall not be used in future.
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_dbgfs_exit() was improperly named causing the build to
fail when CONFIG_DEBUG_FS=n.
Rename adf_dbgfs_cleanup() as adf_dbgfs_exit().
This fixes the following build error:
CC [M] drivers/crypto/intel/qat/qat_c62x/adf_drv.o
drivers/crypto/intel/qat/qat_c62x/adf_drv.c: In function ‘adf_cleanup_accel’:
drivers/crypto/intel/qat/qat_c62x/adf_drv.c:69:9: error: implicit declaration of function ‘adf_dbgfs_exit’; did you mean ‘adf_dbgfs_init’? [-Werror=implicit-function-declaration]
69 | adf_dbgfs_exit(accel_dev);
| ^~~~~~~~~~~~~~
| adf_dbgfs_init
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:252: drivers/crypto/intel/qat/qat_c62x/adf_drv.o] Error 1
make[1]: *** [scripts/Makefile.build:494: drivers/crypto/intel/qat/qat_c62x] Error 2
make: *** [Makefile:2026: drivers/crypto/intel/qat] Error 2
Fixes: 9260db6640 ("crypto: qat - move dbgfs init to separate file")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306030654.5t4qkyN1-lkp@intel.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move initialization of debugfs entries to a separate file.
This simplifies the exclusion of the debugfs logic in the QAT driver
when the kernel is built with CONFIG_DEBUG_FS=n.
In addition, it will allow to consolidate the addition of debugfs
entries to a single location in the code.
This implementation adds infrastructure to create (and remove) debugfs
entries at two different stages. The first, done when a device is probed,
allows to keep debugfs entries persistent between a transition in device
state (up to down or vice versa). The second, done after the initialization
phase, allows to have debugfs entries that are accessible only when
the device is up.
In addition, move the creation of debugfs entries for configuration
to the newly created function adf_dbgfs_init() and replace symbolic
permissions with octal permissions when creating the debugfs files.
This is to resolve the following warning reported by checkpatch:
WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") uncovered
a type mismatch in cesa 3des support that leads to a memcpy beyond the
end of a structure:
In function 'fortify_memcpy_chk',
inlined from 'mv_cesa_des3_ede_setkey' at drivers/crypto/marvell/cesa/cipher.c:307:2:
include/linux/fortify-string.h:583:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is probably harmless as the actual data that is copied has the correct
type, but clearly worth fixing nonetheless.
Fixes: 4ada483978 ("crypto: marvell/cesa - add Triple-DES support")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new CCP/PSP PCI device ID and new PSP register offsets.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PCI device 0x17E0 includes new TEE offsets, doesn't support a
platform mailbox, and does support platform doorbell
so introduce a new structure to represent it.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some platforms might support platform access doorbell but not mailbox.
Add an extra guard to ensure this doesn't cause accesses to wrong ranges
if a consumer calls psp_send_platform_access_msg().
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With CONFIG_ACPI enabled for RISC-V, this driver gets enabled in
allmodconfig build. However, build fails with clang and below
error is seen.
drivers/crypto/hisilicon/qm.c:627:10: error: invalid output constraint '+Q' in asm
"+Q" (*((char __iomem *)fun_base))
^
This is expected error with clang due to the way it is designed.
To fix this issue, move arm64 assembly code under #if.
Link: https://github.com/ClangBuiltLinux/linux/issues/999
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
[sunilvl@ventanamicro.com: Moved tmp0 and tmp1 into the #if]
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230515054928.2079268-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The value returned by an fsl-mc driver's remove function is mostly
ignored. (Only an error message is printed if the value is non-zero
and then device removal continues unconditionally.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # sanity checks
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Fix build warnings when DEBUG_FS is not enabled by using an empty
do-while loop instead of a value:
In file included from ../drivers/crypto/nx/nx.c:27:
../drivers/crypto/nx/nx.c: In function 'nx_register_algs':
../drivers/crypto/nx/nx.h:173:33: warning: statement with no effect [-Wunused-value]
173 | #define NX_DEBUGFS_INIT(drv) (0)
../drivers/crypto/nx/nx.c:573:9: note: in expansion of macro 'NX_DEBUGFS_INIT'
573 | NX_DEBUGFS_INIT(&nx_driver);
../drivers/crypto/nx/nx.c: In function 'nx_remove':
../drivers/crypto/nx/nx.h:174:33: warning: statement with no effect [-Wunused-value]
174 | #define NX_DEBUGFS_FINI(drv) (0)
../drivers/crypto/nx/nx.c:793:17: note: in expansion of macro 'NX_DEBUGFS_FINI'
793 | NX_DEBUGFS_FINI(&nx_driver);
Also, there is no need to build nx_debugfs.o when DEBUG_FS is not
enabled, so change the Makefile to accommodate that.
Fixes: ae0222b728 ("powerpc/crypto: nx driver code supporting nx encryption")
Fixes: aef7b31c88 ("powerpc/crypto: Build files for the nx device driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Breno Leitão <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A platform option like AMBA should never be selected by a driver.
Use a dependency instead.
Also remove the depenency on DMADEVICES because the driver builds
just fine without it. Instead add a dependency on HAS_DMA for dma
mapping support.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kconfig updated to depend on DMADEVICES instead of selecting it.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305191929.Eq4OVZ6D-lkp@intel.com/
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adding hash/HMAC support for SHA-2 and SM3 to StarFive cryptographic
module.
Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since, CAAM driver is probed before soc_device_attribute done as part of:
- drivers/soc/imx/soc-imx8m.c (for i.MX8M)
- drivers/firmware/imx/ele_mu.c (EdgeLock Enclave kernel driver, for i.MX8ULP)
It is needed to return -EPROBE_DEFER, after calling soc_device_match() in
drivers/crypto/caam/ctrl.c.
soc_device_match returns NULL for:
- i.MX8M
- i.MX8ULP,
can be considered that the SoC device has not been probed yet.
Hence, it returns -EPROBE_DEFER directly.
caam: imx: change to use of_match_node in run_descriptor_deco0
Providing imx8m_machine_match to match:
- i.MX8M{Q,M,N,P},
- i.MX8ULP,
so as to start using of_match_node, to simplify the code.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
256 bytes is quite often used in performance benchmarks and this size
appears to be also working just fine, so mark it as safe so that we do
not fallback to software implementation for this packet size. Otherwise
there is a strange bump up in crypto performance at 256 byte packet size.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Arnaud Ebalard <arno@natisbad.org>
Cc: Srujana Challa <schalla@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Shijith Thotton <sthotton@marvell.com>
Cc: Vladis Dronov <vdronov@redhat.com>
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Minghao Chi <chi.minghao@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: linux-crypto@vger.kernel.org
On OcteonTX2/OctoenTX3 variants of silicon, Admin function (AF)
handles resource allocation and configuration for PFs and their VFs.
PFs request the AF directly, via mailboxes.
Unlike PFs, VFs cannot send a mailbox request directly. A VF sends
mailbox messages to its parent PF, with which it shares a
mailbox region. The PF then forwards these messages to the AF.
This patch adds code to configure inline-IPsec HW resources for
CPT VFs as CPT VFs cannot send a mailbox request directly to AF.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for AF -> CPT PF uplink mailbox messages
and adds a mailbox handler to submit a CPT instruction from AF as
current architecture doesn't allow AF to submit CPT instruction
directly to HW.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move to drivers/char/hw_random since histb-(t)rng does not provide
cryptography pseudo rng.
histb-rng is pretty like hisi-rng, but after investigation, we confirm
there is no RNG_PHY_SEED register on histb-rng so a separate driver is
needed.
Still we rename relevant function names to match those in hisi-rng.
Link: https://lore.kernel.org/r/20230401164448.1393336-1-mmyangfl@gmail.com
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Smatch complains that "dma" is uninitialized if dma_pool_alloc() fails.
This is true, but also harmless. Anyway, move the assignment after the
error checking to silence this warning.
Fixes: 586d492f28 ("crypto: ixp4xx - fix building wiht 64-bit dma_addr_t")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
RNG (re-)initialization will be needed on pm resume path,
thus refactor the corresponding code out of the probe callback.
Signed-off-by: Horia GeantA <horia.geanta@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- A long-standing bug in crypto_engine.
- A buggy but harmless check in the sun8i-ss driver.
- A regression in the CRYPTO_USER interface.
-----BEGIN PGP SIGNATURE-----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=9Us7
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- A long-standing bug in crypto_engine
- A buggy but harmless check in the sun8i-ss driver
- A regression in the CRYPTO_USER interface
* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
SS_ENCRYPTION is (0 << 7 = 0), so the test can never be true.
Use a direct comparison to SS_ENCRYPTION instead.
The same king of test is already done the same way in sun8i_ss_run_task().
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
API:
- Total usage stats now include all that returned error (instead of some).
- Remove maximum hash statesize limit.
- Add cloning support for hmac and unkeyed hashes.
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON.
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build.
- Add accelerated AES/GCM stitched implementation on powerpc P10.
- Add some test vectors for cmac(camellia).
- Remove failure case where jent is unavailable outside of FIPS mode in drbg.
- Add permanent and intermittent health error checks in jitter RNG.
Drivers:
- Add support for 402xx devices in qat.
- Add support for HiSTB TRNG.
- Fix hash concurrency issues in stm32.
- Add OP-TEE firmware support in caam.
-----BEGIN PGP SIGNATURE-----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=ITkW
-----END PGP SIGNATURE-----
Merge tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Total usage stats now include all that returned errors (instead of
just some)
- Remove maximum hash statesize limit
- Add cloning support for hmac and unkeyed hashes
- Demote BUG_ON in crypto_unregister_alg to a WARN_ON
Algorithms:
- Use RIP-relative addressing on x86 to prepare for PIE build
- Add accelerated AES/GCM stitched implementation on powerpc P10
- Add some test vectors for cmac(camellia)
- Remove failure case where jent is unavailable outside of FIPS mode
in drbg
- Add permanent and intermittent health error checks in jitter RNG
Drivers:
- Add support for 402xx devices in qat
- Add support for HiSTB TRNG
- Fix hash concurrency issues in stm32
- Add OP-TEE firmware support in caam"
* tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits)
i2c: designware: Add doorbell support for Mendocino
i2c: designware: Use PCI PSP driver for communication
powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10
crypto: p10-aes-gcm - Remove POWER10_CPU dependency
crypto: testmgr - Add some test vectors for cmac(camellia)
crypto: cryptd - Add support for cloning hashes
crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm
crypto: hmac - Add support for cloning
crypto: hash - Add crypto_clone_ahash/shash
crypto: api - Add crypto_clone_tfm
crypto: api - Add crypto_tfm_get
crypto: x86/sha - Use local .L symbols for code
crypto: x86/crc32 - Use local .L symbols for code
crypto: x86/aesni - Use local .L symbols for code
crypto: x86/sha256 - Use RIP-relative addressing
crypto: x86/ghash - Use RIP-relative addressing
crypto: x86/des3 - Use RIP-relative addressing
crypto: x86/crc32c - Use RIP-relative addressing
crypto: x86/cast6 - Use RIP-relative addressing
crypto: x86/cast5 - Use RIP-relative addressing
...
The crypt_ctl structure must be exactly 64 bytes long to work correctly,
and it has to be a power-of-two size to allow turning the
64-bit division in crypt_phys2virt() into a shift operation, avoiding
the link failure:
ERROR: modpost: "__aeabi_uldivmod" [drivers/crypto/intel/ixp4xx/ixp4xx_crypto.ko] undefined!
The failure now shows up because the driver is available for compile
testing after the move, and a previous fix turned the more descriptive
BUILD_BUG_ON() into a link error.
Change the variably-sized dma_addr_t into the expected 'u32' type that is
needed for the hardware, and reinstate the size check for all 32-bit
architectures to simplify debugging if it hits again.
Fixes: 1bc7fdbf26 ("crypto: ixp4xx - Move driver to drivers/crypto/intel/ixp4xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam driver needs to be aware of OP-TEE f/w presence, since some things
are done differently:
1. there is no access to controller's register page (note however that
some registers are aliased in job rings' register pages)
2 Due to this, MCFGR[PS] cannot be read and driver assumes
MCFGR[PS] = b'0 - engine using 32-bit address pointers.
This is in sync with the fact that:
-all i.MX SoCs currently use MCFGR[PS] = b'0
-only i.MX OP-TEE use cases don't allow access to controller register page
Signed-off-by: Horia GeantA <horia.geanta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use job ring register map, in place of controller register map
to access page 0 registers, as access to the controller register
map is not permitted.
Signed-off-by: Horia GeantA <horia.geanta@nxp.com>
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Varun Sethi <v.sethi@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unlike other command registers used by the PSP, only the lower 8 bytes are
used for communication for both command and status of the command.
Suggested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the doorbell failed to ring we return -EIO, but the caller can't
determine why it failed. Pass the reason for the failure in an
argument for caller to investigate.
Suggested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is helpful not just for debugging problems, but also for investigating
captured logs later on.
Suggested-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The doorbell register set used for I2C arbitration is dedicated for this
purpose and there is no need to utilize other safety checks the platform
access register set uses.
Suggested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Hasemeyer <markhas@chromium.org>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A number of platforms are emitting the error:
```ccp: unable to access the device: you might be running a broken BIOS.```
This is expected behavior as CCP is no longer accessible from the PSP's
PCIe BAR so stop trying to probe CCP for 0x1649.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The BUILD_BUG_ON preventing compilation on foreign architectures
should be disabled when we're doing compile testing.
Fixes: 1bc7fdbf26 ("crypto: ixp4xx - Move driver to...")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304061846.G6cpPXiQ-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HiSTB TRNG are found on some HiSilicon STB SoCs.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change blocksize to match the cfb(aes) generic implementation.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoiding detecting finely in-place operations with different
scatter lists. Copying the source data for decryption into rctx->lastc
regardless if the operation is in-place or not. This allows in-place
operations with different scatter lists.
This approach takes less resources than parsing both scatter lists to
check if they are equal.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoiding detecting finely in-place operations with different
scatter lists. Copying the source data for decryption into rctx->lastc
regardless if the operation is in-place or not. This allows in-place
operations with different scatter lists without affecting other
operations.
This approach takes less resources than parsing both scatter lists to
check if they are equal.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add softare padding to hmac-sha digest for zero length messages.
Using the atmel_sha_fill_padding() to fill the buffer with a padded
empty message with a length of the block size.
Create a temporary scatter list from the padded buffer to pass into the
data processing functions.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Create a separate drivers/crypto/intel/ixp4xx directory and move
drivers/crypto/ixp4xx_crypto.c to it, along with a new Kconfig and
Makefile to contain the config and make bits.
Also add a COMPILE_TEST dependency to CRYPTO_DEV_IXP4XX so it can be
more easily compile-tested.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the growing number of Intel crypto drivers, it makes sense to
group them all into a single drivers/crypto/intel/ directory.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by
the psp module so clear the interrupt status register early in the
handler to prevent missed interrupts. sev_irq_handler() calls wake_up()
on a wait queue, which can result in a new command being submitted from
a different CPU. This then races with the clearing of isr and can result
in missed interrupts. A missed interrupt results in a command waiting
until it times out, which results in the psp being declared dead.
This is unlikely on bare metal, but has been observed when running
virtualized. In the cases where this is observed, sev->cmdresp_reg has
PSP_CMDRESP_RESP set which indicates that the command was processed
correctly but no interrupt was asserted.
The full sequence of events looks like this:
CPU 1: submits SEV cmd #1
CPU 1: calls wait_event_timeout()
CPU 0: enters psp_irq_handler()
CPU 0: calls sev_handler()->wake_up()
CPU 1: wakes up; finishes processing cmd #1
CPU 1: submits SEV cmd #2
CPU 1: calls wait_event_timeout()
PSP: finishes processing cmd #2; interrupt status is still set; no interrupt
CPU 0: clears intsts
CPU 0: exits psp_irq_handler()
CPU 1: wait_event_timeout() times out; psp_dead=true
Fixes: 200664d523 ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_optional_enabled() instead of hand writing it.
This saves some loC and improves the semantic.
update the error handling path and the remove function accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark the of_device_id table as maybe_unused. This fixes a W=1 warning:
drivers/crypto/img-hash.c:930:34: error: ‘img_hash_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SA2UL Crypto driver provides support for couple of
DES3 algos "cbc(des3_ede)" and "ecb(des3_ede)", and enabling
the crypto selftest throws the following errors (as seen on
K3 J721E SoCs):
saul-crypto 4e00000.crypto: Error allocating fallback algo cbc(des3_ede)
alg: skcipher: failed to allocate transform for cbc-des3-sa2ul: -2
saul-crypto 4e00000.crypto: Error allocating fallback algo ecb(des3_ede)
alg: skcipher: failed to allocate transform for ecb-des3-sa2ul: -2
Fix this by selecting CRYPTO_DES which was missed while
adding base driver support.
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the comment at the end of the 'for' loop just a few lines
below, it looks needed to clear 'desc'.
So it should also be cleared for the first iteration.
Move the memset() to the beginning of the loop to be safe.
Fixes: 281922a1d4 ("crypto: caam - add support for SEC v5.x RNG4")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Reviewed-by: Gaurav Jain <Gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A platform device's remove callback is only ever called after the probe
callback returned success.
In the case of kmb_ocs_aes_remove() this means that kmb_ocs_aes_probe()
succeeded before and so platform_set_drvdata() was called with a
non-zero argument and platform_get_drvdata() returns non-NULL.
This prepares making remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function, qm_get_qos_value(), a struct bus_type * is used, but it
really should be a const pointer as it is not modified anywhere in the
function, and the driver core function it is used in expects a constant
pointer.
Cc: Weili Qian <qianweili@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230313182918.1312597-29-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PSP can return a "firmware error" code of -1 in circumstances where
the PSP has not actually been called. To make this protocol unambiguous,
name the value SEV_RET_NO_FW_CALL.
[ bp: Massage a bit. ]
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Crypto API hashing paradigm requires the hardware state to
be exported between *each* request because multiple unrelated
hashes may be processed concurrently.
The stm32 hardware is capable of producing the hardware hashing
state but it was only doing it in the export function. This is
not only broken for export as you can't export a kernel pointer
and reimport it, but it also means that concurrent hashing was
fundamentally broken.
Fix this by moving the saving and restoring of hardware hash
state between each and every hashing request.
Fixes: 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Reported-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the emptymsg check in stm32_hash_copy_hash to rely on whether
we have any existing hash state, rather than whether this particular
update request is empty.
Also avoid computing the hash for empty messages as this could hang.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The bit HASH_FLAGS_ERRORS was never used. Remove it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Create a new struct stm32_hash_state so that it may be exported
in future instead of the entire request context.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The variable hdev->err is never read so it can be removed.
Also remove a spurious inclusion of linux/crypto.h.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current finup code is unnecessarily convoluted. There is no
need to call update and final separately as update already does
all the necessary work on its own.
Simplify this by utilising the HASH_FLAGS_FINUP bit in rctx to
indicate only finup and use the HASH_FLAGS_FINAL bit instead to
signify processing common to both final and finup.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no need to poll separate for update and final. We could
merge them into do_one_request.
Also fix the error handling so that we don't poll (and overwrite
the error) when an error has already occurred.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CSR registers go from 0 to 53. So the number of registers
should be 54.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/crypto/atmel-sha204a.c:129:34: error: ‘atmel_sha204a_dt_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some platforms support using a doorbell to communicate. Export
this feature for other drivers to utilize as well.
Link: https://lore.kernel.org/linux-i2c/20220916131854.687371-3-jsd@semihalf.com/
Suggested-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Client PSP parts support the platform access interface. Add
the register offsets so that client parts will initialize this
interface.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some platforms with a PSP support an interface for features that
interact directly with the PSP instead of through a SEV or TEE
environment.
Initialize this interface so that other drivers can consume it.
These drivers may either be subdrivers for the ccp module or
external modules. For external modules, export a symbol for them
to utilize.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some of the bits and fields used for mailboxes communicating with the
PSP are common across all mailbox implementations (SEV, TEE, etc).
Move these bits into the common `linux/psp.h` so they don't need to
be re-defined for each implementation.
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The TEE subdriver for CCP, the amdtee driver and the i2c-designware-amdpsp
drivers all include `psp-sev.h` even though they don't use SEV
functionality.
Move the definition of `__psp_pa` into a common header to be included
by all of these drivers.
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> # For the drivers/i2c/busses/i2c-designware-amdpsp.c
Acked-by: Sumit Garg <sumit.garg@linaro.org> # For TEE subsystem bits
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Sean Christopherson <seanjc@google.com> # KVM
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The only PSP mailbox that currently supports interrupt on completion
is the SEV mailbox. Drop the dead code for the TEE subdriver to
potentially call it.
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yang Shen <shenyang39@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Nick Terrell <terrelln@fb.com>
Acked-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kai Ye <yekai13@huawei.com>
Cc: Longfang Liu <liulongfang@huawei.com>
Acked-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Weili Qian <qianweili@huawei.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Acked-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
<linux/aer.h> is unused, so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Longfang Liu <liulongfang@huawei.com>
Acked-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: qat-linux@intel.com
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The thread to arbiter mapping for 4xxx devices does not allow to
achieve optimal performance for the compression service as it makes
all the engines to compete for the same resources.
Update the logic so that a custom optimal mapping is used for the
compression service.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
QAT_402xx is a derivative of 4xxx. Add support for that device in the
qat_4xxx driver by including the DIDs (both PF and VF), extending the
probe and the firmware loader.
402xx uses different firmware images than 4xxx. To allow that the logic
that selects the firmware images was modified.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'idx' is not initialized if it's not EXP_MODE nor MOD_MODE.
Use "else" instead to fix it.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302261052.CVFRyq6F-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Issues:
- Job ring device is busy when do kexec reboot
- Failed to flush job ring when do system suspend-resume
Fix:
Flush the job ring to stop the running jobs.
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At the moment if there is no firmware available for the safexcel driver
it will fail to load with a cryptic:
crypto-safexcel f2800000.crypto: TRC init: 15360d,80a (48r,256h)
crypto-safexcel f2800000.crypto: HW init failed (-2)
Raise the logging level of the firmware load failure to err rather than
dbg so that it's obvious what the reason for the HW init failure is.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The state machine functions adf_dev_init(), adf_dev_start(),
adf_dev_stop() adf_dev_shutdown() and adf_dev_shutdown_cache_cfg()
are only used internally within adf_init.c.
Do not export these functions and make them static as state transitions
are now performed using the safe function adf_dev_up() and
adf_dev_down().
This commit does not implement any functional change.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor the restart logic by moving it into the function
adf_dev_restart() which uses the safe function adf_dev_up() and
adf_dev_down().
This commit does not implement any functional change.
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device state machine functions are unsafe and interdependent on each
other. To perform a state transition, these shall be called in a
specific order:
* device up: adf_dev_init() -> adf_dev_start()
* device down: adf_dev_stop() -> adf_dev_shutdown()
Replace all the state machine functions used in the QAT driver with the
safe wrappers adf_dev_up() and adf_dev_down().
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sysfs `state` attribute is not protected against race conditions.
If multiple processes perform a device state transition on the same
device in parallel, unexpected behaviors might occur.
For transitioning the device state, adf_sysfs.c calls the functions
adf_dev_init(), adf_dev_start(), adf_dev_stop() and adf_dev_shutdown()
which are unprotected and interdependent on each other. To perform a
state transition, these functions needs to be called in a specific
order:
* device up: adf_dev_init() -> adf_dev_start()
* device down: adf_dev_stop() -> adf_dev_shutdown()
This change introduces the functions adf_dev_up() and adf_dev_down()
which wrap the state machine functions and protect them with a
per-device lock. These are then used in adf_sysfs.c instead of the
individual state transition functions.
Fixes: 5ee52118ac ("crypto: qat - expose device state through sysfs for 4xxx")
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function adf_sysfs_init() is used by qat_4xxx to create sysfs
attributes. This is called by the probe function before starting a
device. With this sequence, there might be a chance that the sysfs
entries for configuration might be changed by a user while the driver
is performing a device bring-up causing unexpected behaviors.
Delay the creation of sysfs entries after adf_dev_start().
Signed-off-by: Shashank Gupta <shashank.gupta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the acry_dev->buf_addr may be NULL, add error handling to
prevent any additional access to avoid potential issues.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The added 'qcom,qce' compatible value will serve as a sole QCE IP family
compatible, since a particular QCE IP version is discoverablem thus, if
it'd be needed to differentiate various IP versions, it can be obtained
in runtime.
Two IP version based compatibles are left untouched to preserve backward
DTB ABI compatibility.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On certain Snapdragon processors, the crypto engine clocks are enabled by
default by security firmware and the driver should not handle the clocks.
Make acquiring of all the clocks optional in crypto engine driver, so that
the driver initializes properly even if no clocks are specified in the dt.
Tested-by: Jordan Crouse <jorcrous@amazon.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[Bhupesh: Massage the commit log]
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto engine on certain Snapdragon processors like sm8150, sm8250, sm8350
etc. requires interconnect path between the engine and memory to be
explicitly enabled and bandwidth set prior to any operations. Add support
in the qce core to enable the interconnect path appropriately.
Tested-by: Jordan Crouse <jorcrous@amazon.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
[Bhupesh: Make header file inclusion alphabetical and use devm_of_icc_get()]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[vladimir: moved icc bandwidth setup closer to its acquisition]
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to Use devm_platform_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Include crypto/algapi.h instead of linux/crypto.h in adf_ctl_drv.c
as this is using the low-level Crypto API. It just happens to work
currently because MODULE_ALIAS_CRYPTO was mistakenly added to
linux/crypto.h.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lucas Segarra Fernandez