[ Upstream commit afa536d840 ]
The ct_state validate should not only check the mask bit and also
check mask_bit & key_bit..
For the +new+est case example, The 'new' and 'est' bits should be
set in both state_mask and state flags. Or the -new-est case also
will be reject by kernel.
When Openvswitch with two flows
ct_state=+trk+new,action=commit,forward
ct_state=+trk+est,action=forward
A packet go through the kernel and the contrack state is invalid,
The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the
finally dp action will be drop with -new-est+trk.
Fixes: 1bcc51ac07 ("net/sched: cls_flower: Reject invalid ct_state flags rules")
Fixes: 3aed8b6333 ("net/sched: cls_flower: validate ct_state for invalid and reply flags")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2c2142232 ]
We were linearizing non-TSO skbs that had too many frags, but
we weren't checking number of frags on TSO skbs. This could
lead to a bad page reference when we received a TSO skb with
more frags than the Tx descriptor could support.
v2: use gso_segs rather than yet another division
don't rework the check on the nr_frags
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b24cdfc72 ]
Fix setting min/max DSI PLL rate for the V4.1 7nm DSI PLL (used on
sm8250). Current code checks for pll->type before it is set (as it is
set in the msm_dsi_pll_init() after calling device-specific functions.
Cc: Jonathan Marek <jonathan@marek.ca>
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a141dd7f7 ]
The following sequence of commands:
register_ftrace_direct(ip, addr1);
modify_ftrace_direct(ip, addr1, addr2);
unregister_ftrace_direct(ip, addr2);
will cause the kernel to warn:
[ 30.179191] WARNING: CPU: 2 PID: 1961 at kernel/trace/ftrace.c:5223 unregister_ftrace_direct+0x130/0x150
[ 30.180556] CPU: 2 PID: 1961 Comm: test_progs W O 5.12.0-rc2-00378-g86bc10a0a711-dirty #3246
[ 30.182453] RIP: 0010:unregister_ftrace_direct+0x130/0x150
When modify_ftrace_direct() changes the addr from old to new it should update
the addr stored in ftrace_direct_funcs. Otherwise the final
unregister_ftrace_direct() won't find the address and will cause the splat.
Fixes: 0567d68091 ("ftrace: Add modify_ftrace_direct()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20210316195815.34714-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8ce0275e4 ]
pre_tun_rule flows does not follow the usual add-flow path, instead
they are used to update the pre_tun table on the firmware. This means
that if the mask-id gets allocated here the firmware will never see the
"NFP_FL_META_FLAG_MANAGE_MASK" flag for the specific mask id, which
triggers the allocation on the firmware side. This leads to the firmware
mask being corrupted and causing all sorts of strange behaviour.
Fixes: f12725d98c ("nfp: flower: offload pre-tunnel rules")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c4f5e19d6 ]
Differentiate between ipv4 and ipv6 flows when configuring the pre_tunnel
table to prevent them trampling each other in the table.
Fixes: 783461604f ("nfp: flower: update flow merge code to support IPv6 tunnels")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 982e5ee23d ]
There are some pre_tunnel flows combinations which are incorrectly being
offloaded without proper support, fix these.
- Matching on MPLS is not supported for pre_tun.
- Match on IPv4/IPv6 layer must be present.
- Destination MAC address must match pre_tun.dev MAC
Fixes: 120ffd84a9 ("nfp: flower: verify pre-tunnel rules")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f7e90fadd ]
We observed some Cisco APs sending the following HE Operation IE in
associate response:
ff 0a 24 f4 3f 00 01 fc ff 00 00 00
Its HE operation parameter is 0x003ff4, so the expected total length is
7 which does not match the actual length = 10. This causes association
failing with "HE AP is missing HE Capability/operation."
According to P802.11ax_D4 Table9-94, HE operation is extensible, and
according to 802.11-2016 10.27.8, STA should discard the part beyond
the maximum length and parse the truncated element.
Allow HE operation element to be longer than expected to handle this
case and future extensions.
Fixes: e4d005b80d ("mac80211: refactor extended element parsing")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org>
Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1944015fe9 ]
Coverity reported the strange "if (~...)" condition that's
always true. It suggested that ! was intended instead of ~,
but upon further analysis I'm convinced that what really was
intended was a comparison to 0xff/0xffff (in HT/VHT cases
respectively), since this indicates that all of the rates
are enabled.
Change the comparison accordingly.
I'm guessing this never really mattered because a reset to
not having a rate mask is basically equivalent to having a
mask that enables all rates.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2ffbe6d333 ("mac80211: fix and optimize MCS mask handling")
Fixes: b119ad6e72 ("mac80211: add rate mask logic for vht rates")
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210212112213.36b38078f569.I8546a20c80bc1669058eb453e213630b846e107b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e98d9ee64e ]
For M_CAN peripherals, m_can_rx_handler() was called with quota = 1,
which caused any error handling to block RX from taking place until
the next time the IRQ handler is called. This had been observed to
cause RX to be blocked indefinitely in some cases.
This is fixed by calling m_can_rx_handler with a sensibly high quota.
Fixes: f524f829b7 ("can: m_can: Create a m_can platform framework")
Link: https://lore.kernel.org/r/20210303144350.4093750-1-torin@maxiluxsystems.com
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0e399f3ba ]
Message loss from RX FIFO 0 is already handled in
m_can_handle_lost_msg(), with netdev output included.
Removing this warning also improves driver performance under heavy
load, where m_can_do_rx_poll() may be called many times before this
interrupt is cleared, causing this message to be output many
times (thanks Mariusz Madej for this report).
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.com
Reported-by: Mariusz Madej <mariusz.madej@xtrack.com>
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e2fe01dd6 ]
Currently doing modprobe c_can_pci will make the kernel complain:
Unbalanced pm_runtime_enable!
this is caused by pm_runtime_enable() called before pm is initialized.
This fix is similar to 227619c3ff, move those pm_enable/disable code
to c_can_platform.
Fixes: 4cdd34b268 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller")
Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0429d6d89f ]
There is a UAF in c_can_pci_remove(). dev is released by
free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later.
To fix this issue, save the mmio address before releasing dev.
Fixes: 5b92da0443 ("c_can_pci: generic module for C_CAN/D_CAN on PCI")
Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c6e6bce08 ]
Under certain circumstances, when switching from Kvaser's linuxcan driver
(kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting
is not disabled.
This is flooding the kernel log with prints like:
[3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009
Always put the controller in the expected state, instead of assuming that
bus load reporting is inactive.
Note: If bus load reporting is enabled when the driver is loaded, you will
still get a number of bus load packages (and printouts), before it is
disabled.
Fixes: 26ad340e58 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.com
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c5e474bc ]
For cases when flexcan is built-in, bitrate is still not set at
registering. So flexcan_chip_freeze() generates:
[ 1.860000] *** ZERO DIVIDE *** FORMAT=4
[ 1.860000] Current process id is 1
[ 1.860000] BAD KERNEL TRAP: 00000000
[ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8
To allow chip freeze, using an hardcoded timeout when bitrate is still
not set.
Fixes: ec15e27cc8 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
[mkl: use if instead of ? operator]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ec7b89ed ]
Since the peak_usb driver also supports the CAN-USB interfaces
"PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds
their names to the list of explicitly supported devices.
Fixes: ea8b65b596 ("can: usb: Add support of PCAN-Chip USB stamp module")
Fixes: f00b534ded ("can: peak: Add support for PCAN-USB X6 USB interface")
Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4eb538e1f ]
The previous patch ensures that the TX flags (struct
can_isotp_ll_options::tx_flags) are 0 for classic CAN frames or a user
configured value for CAN-FD frames.
This patch sets the CAN frames flags unconditionally to the ISO-TP TX
flags, so that they are initialized to a proper value. Otherwise when
running "candump -x" on a classical CAN ISO-TP stream shows wrongly
set "B" and "E" flags.
| $ candump any,0:0,#FFFFFFFF -extA
| [...]
| can0 TX B E 713 [8] 2B 0A 0B 0C 0D 0E 0F 00
| can0 TX B E 713 [8] 2C 01 02 03 04 05 06 07
| can0 TX B E 713 [8] 2D 08 09 0A 0B 0C 0D 0E
| can0 TX B E 713 [8] 2E 0F 00 01 02 03 04 05
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4912459bd ]
CAN-FD frames have struct canfd_frame::flags, while classic CAN frames
don't.
This patch refuses to set TX flags (struct
can_isotp_ll_options::tx_flags) on non CAN-FD isotp sockets.
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/r/20210218215434.1708249-2-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7233da8669 ]
Currently tcp_check_req can be called with obsolete req socket for which big
socket have been already created (because of CPU race or early demux
assigning req socket to multiple packets in gro batch).
Commit e0f9759f53 ("tcp: try to keep packet if SYN_RCV race
is lost") added retry in case when tcp_check_req is called for PSH|ACK packet.
But if client sends RST+ACK immediatly after connection being
established (it is performing healthcheck, for example) retry does not
occur. In that case tcp_check_req tries to close req socket,
leaving big socket active.
Fixes: e0f9759f53 ("tcp: try to keep packet if SYN_RCV race is lost")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Oleg Senin <olegsenin@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d82c6c1aac ]
if pl->mac_ops->mac_finish() failed, phylink_err should use
"mac_finish" instead of "mac_prepare".
Fixes: b7ad14c2fe ("net: phylink: re-implement interface configuration with PCS")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf0ffea336 ]
"x25_close" is called by "hdlc_close" in "hdlc.c", which is called by
hardware drivers' "ndo_stop" function.
"x25_xmit" is called by "hdlc_start_xmit" in "hdlc.c", which is hardware
drivers' "ndo_start_xmit" function.
"x25_rx" is called by "hdlc_rcv" in "hdlc.c", which receives HDLC frames
from "net/core/dev.c".
"x25_close" races with "x25_xmit" and "x25_rx" because their callers race.
However, we need to ensure that the LAPB APIs called in "x25_xmit" and
"x25_rx" are called before "lapb_unregister" is called in "x25_close".
This patch adds locking to ensure when "x25_xmit" and "x25_rx" are doing
their work, "lapb_unregister" is not yet called in "x25_close".
Reasons for not solving the racing between "x25_close" and "x25_xmit" by
calling "netif_tx_disable" in "x25_close":
1. We still need to solve the racing between "x25_close" and "x25_rx";
2. The design of the HDLC subsystem assumes the HDLC hardware drivers
have full control over the TX queue, and the HDLC protocol drivers (like
this driver) have no control. Controlling the queue here in the protocol
driver may interfere with hardware drivers' control of the queue.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b58f33d49e ]
Before this change, the mask is never included in the netlink message, so
"conntrack -E expect" always prints 0.0.0.0.
In older kernels the l3num callback struct was passed as argument, based
on tuple->src.l3num. After the l3num indirection got removed, the call
chain is based on m.src.l3num, but this value is 0xffff.
Init l3num to the correct value.
Fixes: f957be9d34 ("netfilter: conntrack: remove ctnetlink callbacks from l3 protocol trackers")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31254dc956 ]
When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4
part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b64
("selftests/bpf: No need to drop the packet when there is no geneve opt"),
when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error,
there is no need to drop the packets and break all geneve rx traffic.
Just set opt_class to 0 and keep returning TC_ACT_OK at the end.
Fixes: 557c223b64 ("selftests/bpf: No need to drop the packet when there is no geneve opt")
Fixes: 933a741e3b ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/bpf/20210309032214.2112438-1-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a25f822285 ]
flow_dissector_key_icmp::id is of type u16 (CPU byteorder),
ICMP header has its ID field in network byteorder obviously.
Sparse says:
net/core/flow_dissector.c:178:43: warning: restricted __be16 degrades to integer
Convert ID value to CPU byteorder when storing it into
flow_dissector_key_icmp.
Fixes: 5dec597e5c ("flow_dissector: extract more ICMP information")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a9ef3e11c ]
When a QMI handle is initialized, an array of message handler
structures is provided, defining how any received message should
be handled based on its type and message ID. The QMI core code
traverses this array when a message arrives and calls the function
associated with the (type, msg_id) found in the array.
The array is supposed to be terminated with an empty (all zero)
entry though. Without it, an unsupported message will cause
the QMI core code to go past the end of the array.
Fix this bug, by properly terminating the message handler arrays
provided when QMI handles are set up by the IPA driver.
Fixes: 530f9216a9 ("soc: qcom: ipa: AP/modem communications")
Reported-by: Sujit Kautkar <sujitka@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 148ddaa89d ]
While picking commit a8cd989e1a ("mmc: sdhci-msm: Warn about
overclocking SD/MMC") back to my tree I was surprised that it was
reporting warnings. I thought I fixed those! Looking closer at the
fix, I see that I totally bungled it (or at least I halfway bungled
it). The SD card clock got fixed (and that was the one I was really
focused on fixing), but I totally adjusted the wrong clock for eMMC.
Sigh. Let's fix my dumb mistake.
Now both SD and eMMC have floor for the "apps" clock.
This doesn't matter a lot for the final clock rate for HS400 eMMC but
could matter if someone happens to put some slower eMMC on a sc7180.
We also transition through some of these lower rates sometimes and
having them wrong could cause problems during these transitions.
These were the messages I was seeing at boot:
mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz
mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz
mmc1: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz
Fixes: 6d37a8d192 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210224095013.1.I2e2ba4978cfca06520dfb5d757768f9c42140f7c@changeid
Reviewed-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6897087323 ]
The interrupt handler may set the flag to reset the mac in the future,
but that flag is not cleared once the reset has occurred.
Fixes: 10cbd64076 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a1468ba0e ]
Per the datasheet, when we clear the power down bit, the PHY remains in
an internal reset state for 40us and then resume normal operation.
Account for that delay to avoid any issues in the future if
genphy_resume() changes.
Fixes: fe26821fa6 ("net: phy: broadcom: Wire suspend/resume for BCM54810")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db74623a38 ]
In qlcnic_83xx_get_minidump_template, fw_dump->tmpl_hdr was freed by
vfree(). But unfortunately, it is used when extended is true.
Fixes: 7061b2bdd6 ("qlogic: Deletion of unnecessary checks before two function calls")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b52912b829 ]
There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571
that we have caught its return value but lack further handling.
Check and terminate the execution flow just like other e1e_wphy()
in this function.
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f857f032 ]
A possible race condition was found in e1000_reset_task,
after discovering a similar issue in igb driver via
commit 024a8168b7 ("igb: reinit_locked() should be called
with rtnl_lock").
Added rtnl_lock() and rtnl_unlock() to avoid this.
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc9e502097 ]
The comment describing the timestamps layout in the packet buffer is
wrong and the code is actually retrieving the timestamp in Timer 1
reference instead of Timer 0. This hasn't been a big issue so far
because hardware is configured to report both timestamps using Timer 0
(see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp()
helper). This patch fixes the comment and the code so we retrieve the
timestamp in Timer 0 reference as expected.
This patch also takes the opportunity to get rid of the hw.mac.type check
since it is not required.
Fixes: 81b055205e ("igc: Add support for RX timestamping")
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a4a1cdc5a ]
The Supported Pause Frame always display "No" even though the Advertised
pause frame showing the correct setting based on the pause parameters via
ethtool. Set bit in link_ksettings to "Supported" for Pause Frame.
Before output:
Supported pause frame use: No
Expected output:
Supported pause frame use: Symmetric
Fixes: 8c5ad0dae9 ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8876529465 ]
Fix Pause Frame Advertising when getting the advertisement via ethtool.
Remove setting the "advertising" bit in link_ksettings during default
case when Tx and Rx are in off state with Auto Negotiate off.
Below is the original output of advertisement link during Tx and Rx off:
Advertised pause frame use: Symmetric Receive-only
Expected output:
Advertised pause frame use: No
Fixes: 8c5ad0dae9 ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6da262378c ]
This commit applies to the igc_reset_task the same changes that
were applied to the igb driver in commit 024a8168b7 ("igb:
reinit_locked() should be called with rtnl_lock")
and fix possible race in reset subtask.
Fixes: 0507ef8a03 ("igc: Add transmit and receive fastpath and interrupt handlers")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47142ed6c3 ]
Similar to commit 92696286f3 ("net:
bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to
qualify the phydev->dev_flags based on whether the port is connected to
an internal or external PHY otherwise we risk having a flags collision
with a completely different interpretation depending on the driver.
Fixes: aa9aef77c7 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9398e9c0b1 ]
In the rare case that drop_monitor fails to register its probe on the
'napi_poll' tracepoint, it will not deactivate its hysteresis timer as
part of the error path. If the hysteresis timer was armed by the shortly
lived 'kfree_skb' probe and user space retries to initiate tracing, a
warning will be emitted for trying to initialize an active object [1].
Fix this by properly undoing all the operations that were done prior to
probe registration, in both software and hardware code paths.
Note that syzkaller managed to fail probe registration by injecting a
slab allocation failure [2].
[1]
ODEBUG: init active (active state 0) object type: timer_list hint: sched_send_work+0x0/0x60 include/linux/list.h:135
WARNING: CPU: 1 PID: 8649 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 1 PID: 8649 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
[...]
Call Trace:
__debug_object_init+0x524/0xd10 lib/debugobjects.c:588
debug_timer_init kernel/time/timer.c:722 [inline]
debug_init kernel/time/timer.c:770 [inline]
init_timer_key+0x2d/0x340 kernel/time/timer.c:814
net_dm_trace_on_set net/core/drop_monitor.c:1111 [inline]
set_all_monitor_traces net/core/drop_monitor.c:1188 [inline]
net_dm_monitor_start net/core/drop_monitor.c:1295 [inline]
net_dm_cmd_trace+0x720/0x1220 net/core/drop_monitor.c:1339
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2348
___sys_sendmsg+0xf3/0x170 net/socket.c:2402
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2435
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
[2]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
CPU: 1 PID: 8645 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
dump_stack+0xfa/0x151
should_fail.cold+0x5/0xa
should_failslab+0x5/0x10
__kmalloc+0x72/0x3f0
tracepoint_add_func+0x378/0x990
tracepoint_probe_register+0x9c/0xe0
net_dm_cmd_trace+0x7fc/0x1220
genl_family_rcv_msg_doit+0x228/0x320
genl_rcv_msg+0x328/0x580
netlink_rcv_skb+0x153/0x420
genl_rcv+0x24/0x40
netlink_unicast+0x533/0x7d0
netlink_sendmsg+0x856/0xd90
sock_sendmsg+0xcf/0x120
____sys_sendmsg+0x6e8/0x810
___sys_sendmsg+0xf3/0x170
__sys_sendmsg+0xe5/0x1b0
do_syscall_64+0x2d/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 70c69274f3 ("drop_monitor: Initialize timer and work item upon tracing enable")
Fixes: 8ee2267ad3 ("drop_monitor: Convert to using devlink tracepoint")
Reported-by: syzbot+779559d6503f3a56213d@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 385d40b042 ]
The cited change added offload support for Geneve options without verifying
the validity of the options masks, this caused offload of rules with match
on Geneve options with class,type and data masks which are zero to fail.
Fix by ignoring the match on Geneve options in case option masks are
all zero.
Fixes: 9272e3df30 ("net/mlx5e: Geneve, Add support for encap/decap flows offload")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5eb01344e ]
Each RQ (including XSK RQs) takes a reference to the XDP program. When
an XDP program is attached or detached, the channels and queues are
recreated, however, there is a special flow for changing an active XDP
program to another one. In that flow, channels and queues stay alive,
but the refcounts of the old and new XDP programs are adjusted. This
flow didn't increment refcount by the number of active XSK RQs, and this
commit fixes it.
Fixes: db05815b36 ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5dd03b26b ]
Since cited patch, MLX5E_REQUIRED_WQE_MTTS is not a power of two.
Hence, usage of MLX5E_LOG_ALIGNED_MPWQE_PPW should be replaced,
as it lost some accuracy. Use the designated macro to calculate
the number of required MTTs.
This makes sure the solution in cited patch works properly.
While here, un-inline mlx5e_get_mpwqe_offset(), and remove the
unused RQ parameter.
Fixes: c3c9402373 ("net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7fb6465d4 ]
It was reported ([0]) that having optional -m flag between source and
destination arguments in install command breaks bpftools cross-build
on MacOS. Move -m to the front to fix this issue.
[0] https://github.com/openwrt/openwrt/pull/3959
Fixes: 7110d80d53 ("libbpf: Makefile set specified permission mode")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210308183038.613432-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 769c18b254 ]
bpf_fd_inode_storage_lookup_elem() returned NULL when getting a bad FD,
which caused -ENOENT in bpf_map_copy_value. -EBADF error is better than
-ENOENT for a bad FD behaviour.
The patch was partially contributed by CyberArk Software, Inc.
Fixes: 8ea636848a ("bpf: Implement bpf_local_storage for inodes")
Signed-off-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210307120948.61414-1-tallossos@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
