Current code assumes calibration values are always stored contiguously
in host endian order. A future patch will prove this wrong.
Let's specify the offset for each calibration byte instead.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-5-nico@fluxnic.net
All the .hw_tshut_temp instances are initialized with the same value.
Let's remove those and use a common definition instead. If ever a
different value must be used in the future then an override parameter
could be added back.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-4-nico@fluxnic.net
Move efuse data interpretation inside lvts_golden_temp_init() alongside
the actual code retrieving wanted value.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-3-nico@fluxnic.net
Calibration values are 24-bit wide. Those values so far appear to span
only 16 bits but let's not push our luck.
Found while looking at the original Mediatek driver code.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240402032729.2736685-2-nico@fluxnic.net
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfc1193d4d ("thermal/drivers/tsens: Replace custom 8960 apis with generic apis")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240411114021.12203-1-amishin@t-argos.ru
In order for lvts_raw_to_temp to function properly on mt8192,
temperature coefficients for mt8192 need to be added.
Fixes: 288732242d ("thermal/drivers/mediatek/lvts_thermal: Add mt8192 support")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240416-lvts_thermal-v2-1-f8a36882cc53@chromium.org
The initial driver used a formula to approximate the temperature and
register values reversed engineered from an out-of-tree BSP driver. This
was needed as the datasheet at the time did not contain any information
on how to do this. Later Gen3 (Rev 2.30) and Gen4 (all) now contains
this information.
Update the approximation formula to use the datasheet's information
instead of the reversed-engineered one.
On an idle M3-N without fused calibration values for PTAT and THCODE the
old formula reports,
zone0: 52000
zone1: 53000
zone2: 52500
While the new formula under the same circumstances reports,
zone0: 52500
zone1: 54000
zone2: 54000
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240327133013.3982199-3-niklas.soderlund+renesas@ragnatech.se
The calculated Tj_T constant is calculated from the PTAT data either
read from the first TSC zone on the device if calibration data is fused,
or from fallback values in the driver itself. The value calculated is
shared among all TSC zones.
Move the Tj_T constant to the shared private data structure instead of
duplicating it in each TSC private data. This requires adding a pointer
to the shared data to the TSC private data structure. This back pointer
make it easier to further rework the temperature conversion logic.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240327133013.3982199-2-niklas.soderlund+renesas@ragnatech.se
In comparison to other Amlogic chips, there is one key difference.
The offset for the sec_ao base, also known as u_efuse_off, is special,
while other aspects remain the same.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240328191322.17551-3-ddrokosov@salutedevices.com
Provide right compatible properties for Amlogic A1 Thermal Sensor
controller. A1 family supports only one thermal node - CPU thermal
sensor.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240328191322.17551-2-ddrokosov@salutedevices.com
As part of suspend to RAM, tsens hardware will be turned off.
While resume callback, re-initialize tsens hardware.
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
Acked-by: Amit Kucheria <amitk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240328050230.31770-1-quic_priyjain@quicinc.com
'st,passive_colling_temp' does not appear in the device-tree, 'reg' and
'#thermal-sensor-cells' are also missing in the device description.
Convert st,stih407-thermal binding to DT schema format in order to clean
unused 'st,passive_cooling_temp' and add missing properties.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240320-thermal-v3-1-700296694c4a@gmail.com
Simplify the code by using the helper we have for doing exactly this.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240320104940.65031-1-linux@rasmusvillemoes.dk
Up until now, the necessary scm availability check has not been
performed, leading to possible null pointer dereferences (which did
happen for me on RB1).
Fix that.
Fixes: 53bca371cd ("thermal/drivers/qcom: Add support for LMh driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240308-topic-rb1_lmh-v2-2-bac3914b0fe3@linaro.org
The count field in struct trip_stats, representing the number of times
the zone temperature was above the trip point, needs to be incremented
in thermal_debug_tz_trip_up(), for two reasons.
First, if a trip point is crossed on the way up for the first time,
thermal_debug_update_temp() called from update_temperature() does
not see it because it has not been added to trips_crossed[] array
in the thermal zone's struct tz_debugfs object yet. Therefore, when
thermal_debug_tz_trip_up() is called after that, the trip point's
count value is 0, and the attempt to divide by it during the average
temperature computation leads to a divide error which causes the kernel
to crash. Setting the count to 1 before the division by incrementing it
fixes this problem.
Second, if a trip point is crossed on the way up, but it has been
crossed on the way up already before, its count value needs to be
incremented to make a record of the fact that the zone temperature is
above the trip now. Without doing that, if the mitigations applied
after crossing the trip cause the zone temperature to drop below its
threshold, the count will not be updated for this episode at all and
the average temperature in the trip statistics record will be somewhat
higher than it should be.
Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZhu2kwAKCRBZ7Krx/gZQ
62gzAP9eeADy6rQkzgWJ8d8sKzGfmd0nup9WlCOxZSR0XojTXwEAnue47dn7PlMx
wQY0joZ0V5FO8PNTEbWc2P/dSQrANgc=
=MshW
-----END PGP SIGNATURE-----
Merge tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysfs fix from Al Viro:
"Get rid of lockdep false positives around sysfs/overlayfs
syzbot has uncovered a class of lockdep false positives for setups
with sysfs being one of the backing layers in overlayfs. The root
cause is that of->mutex allocated when opening a sysfs file read-only
(which overlayfs might do) is confused with of->mutex of a file opened
writable (held in write to sysfs file, which overlayfs won't do).
Assigning them separate lockdep classes fixes that bunch and it's
obviously safe"
* tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: annotate different lockdep class for of->mutex of writable files
- Follow up fixes for the BHI mitigations code.
- Fix !SPECULATION_MITIGATIONS bug not turning off
mitigations as expected.
- Work around an APIC emulation bug when the kernel is built with
Clang and run as a SEV guest.
- Follow up x86 topology fixes.
Note that there's minor cleanups included in the BHI fixes,
which we'd normally delay to the next merge window, but the
BHI mitigations code is new and will be backported widely,
so we thought it would be better to have a unified codebase
at this stage. (Let me know if that assumption is wrong and
I'll rebase it.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2ig7
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
data in certain circumstances.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=L86s
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix the x86 PMU multi-counter code returning invalid data in certain
circumstances"
* tag 'perf-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix out of range data
Some small, obvious (in hindsight) bugfixes:
- new ioctl in vhost-vdpa has a wrong # - not too late to fix
- vhost has apparently been lacking an smp_rmb() -
due to code duplication :( The duplication will be fixed in
the next merge cycle, this is a minimal fix.
- an error message in vhost talks about guest moving used index -
which of course never happens, guest only ever moves the
available index.
- i2c-virtio didn't set the driver owner so it did not get
refcounted correctly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmYTqN4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMaAH/iEP8RA0casqGCVvHsAn0LXQlFMtL8GemYbY
EX26EL8vfQZGYQ3GoZQpWUR63Oiaaptu0r+phAtMktRj/QeSWQtCM0XX+cV8xiwV
3dFOosMYYqDihXraDnrpOqYnl0jc4cF3lrAf+WEFxNokdRSLP6hnXqmokmQI/YVG
mhgnnRnhWQInkfPAzkYqEjQKhssFnKhiRGyV6saXmFHf+lUE68mBQ9NO42ogW74m
FWMaEd7r6rfimjDYjotOgISP1xH0G17FudKoYly5Ymf1PSZbrinO+nU0rtklXxEG
qIrMXQHzHPhRBP5eCU7qhOO4cPq4UphB0tY7ow4Wqr1e0eymauw=
=dpxf
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio bugfixes from Michael Tsirkin:
"Some small, obvious (in hindsight) bugfixes:
- new ioctl in vhost-vdpa has a wrong # - not too late to fix
- vhost has apparently been lacking an smp_rmb() - due to code
duplication :( The duplication will be fixed in the next merge
cycle, this is a minimal fix
- an error message in vhost talks about guest moving used index -
which of course never happens, guest only ever moves the available
index
- i2c-virtio didn't set the driver owner so it did not get refcounted
correctly"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct misleading printing information
vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE
virtio: store owner from modules with register_virtio_driver()
vhost: Add smp_rmb() in vhost_enable_notify()
vhost: Add smp_rmb() in vhost_vq_avail_empty()
- fix up swiotlb buffer padding even more (Petr Tesarik)
- fix for partial dma_sync on swiotlb (Michael Kelley)
- swiotlb debugfs fix (Dexuan Cui)
-----BEGIN PGP SIGNATURE-----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=U10z
-----END PGP SIGNATURE-----
Merge tag 'dma-maping-6.9-2024-04-14' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix up swiotlb buffer padding even more (Petr Tesarik)
- fix for partial dma_sync on swiotlb (Michael Kelley)
- swiotlb debugfs fix (Dexuan Cui)
* tag 'dma-maping-6.9-2024-04-14' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not set total_used to 0 in swiotlb_create_debugfs_files()
swiotlb: fix swiotlb_bounce() to do partial sync's correctly
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary
The writable file /sys/power/resume may call vfs lookup helpers for
arbitrary paths and readonly files can be read by overlayfs from vfs
helpers when sysfs is a lower layer of overalyfs.
To avoid a lockdep warning of circular dependency between overlayfs
inode lock and kernfs of->mutex, use a different lockdep class for
writable and readonly kernfs files.
Reported-by: syzbot+9a5b0ced8b1bfb238b56@syzkaller.appspotmail.com
Fixes: 0fedefd4c4 ("kernfs: sysfs: support custom llseek method for sysfs entries")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Add the mask_port_map parameter to the ahci driver. This is a
follow-up to the recent snafu with the ASMedia controller and its
virtual port hidding port-multiplier devices. As ASMedia confirmed
that there is no way to determine if these slow-to-probe virtual
ports are actually representing the ports of a port-multiplier
devices, this new parameter allow masking ports to significantly
speed up probing during system boot, resulting in shorter boot times.
- A fix for an incorrect handling of a port unlock in
ata_scsi_dev_rescan().
- Allow command duration limits to be detected for ACS-4 devices are
there are such devices out in the field.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZho+/AAKCRDdoc3SxdoY
dhm2AP49p/aAmpTGKYQjXwiQWH4JMR/ey9rZgdw0jjGtMYkdRQEA+aCLtWFKnENr
1E+lnTO+ef01BhJlk/FCK2VyOqCNxwM=
=pDw+
-----END PGP SIGNATURE-----
Merge tag 'ata-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Add the mask_port_map parameter to the ahci driver. This is a
follow-up to the recent snafu with the ASMedia controller and its
virtual port hidding port-multiplier devices. As ASMedia confirmed
that there is no way to determine if these slow-to-probe virtual
ports are actually representing the ports of a port-multiplier
devices, this new parameter allow masking ports to significantly
speed up probing during system boot, resulting in shorter boot times.
- A fix for an incorrect handling of a port unlock in
ata_scsi_dev_rescan().
- Allow command duration limits to be detected for ACS-4 devices are
there are such devices out in the field.
* tag 'ata-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Allow command duration limits detection for ACS-4 drives
ata: libata-scsi: Fix ata_scsi_dev_rescan() error path
ata: ahci: Add mask_port_map module parameter
- Suppress a coccicheck warning using str_plural().
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZhnikwAKCRDdoc3SxdoY
ditrAP9s/r36Dl4c8BZxpoUyCmf44ww6oTMxGzjwi/4gA8Ry2gEA766WGVsDyJf2
G0qjl7+bVneaOG6Xayzce69OjvZGZws=
=U6kP
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Suppress a coccicheck warning using str_plural()
* tag 'zonefs-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Use str_plural() to fix Coccinelle warning
-----BEGIN PGP SIGNATURE-----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=AHB9
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix for oops in cifs_get_fattr of deleted files
- fix for the remote open counter going negative in some directory
lease cases
- fix for mkfifo to instantiate dentry to avoid possible crash
- important fix to allow handling key rotation for mount and remount
(ie cases that are becoming more common when password that was used
for the mount will expire soon but will be replaced by new password)
* tag 'v6.9-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix broken reconnect when password changing on the server by allowing password rotation
smb: client: instantiate when creating SFU files
smb3: fix Open files on server counter going negative
smb: client: fix NULL ptr deref in cifs_mark_open_handles_for_deleted_file()
Even though the command duration limits (CDL) feature was first added
in ACS-5 (major version 12), there are some ACS-4 (major version 11)
drives that implement CDL as well.
IDENTIFY_DEVICE, SUPPORTED_CAPABILITIES, and CURRENT_SETTINGS log pages
are mandatory in the ACS-4 standard so it should be safe to read these
log pages on older drives implementing the ACS-4 standard.
Fixes: 62e4a60e0c ("scsi: ata: libata: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Commit 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
incorrectly handles failures of scsi_resume_device() in
ata_scsi_dev_rescan(), leading to a double call to
spin_unlock_irqrestore() to unlock a device port. Fix this by redefining
the goto labels used in case of errors and only unlock the port
scsi_scan_mutex when scsi_resume_device() fails.
Bug found with the Smatch static checker warning:
drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan()
error: double unlocked 'ap->lock' (orig line 4757)
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 0c76106cb9 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
KVM/arm64 to miss dirty pages due to stale TLB entries.
-----BEGIN PGP SIGNATURE-----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=0ljm
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix the TLBI RANGE operand calculation causing live migration under
KVM/arm64 to miss dirty pages due to stale TLB entries"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tlb: Fix TLBI RANGE operand
The device tree changes this time are all for NXP i.MX platforms, addressing
issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor
bug fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores.
-----BEGIN PGP SIGNATURE-----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=qMYh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The device tree changes this time are all for NXP i.MX platforms,
addressing issues with clocks and regulators on i.MX7 and i.MX8.
The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
regressions that came in.
The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
fixes.
A regression fix for RISC-V cache management addresses a problem with
probe order on Sifive cores"
* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
MAINTAINERS: Change Krzysztof Kozlowski's email address
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
cache: sifive_ccache: Partially convert to a platform driver
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
...
-----BEGIN PGP SIGNATURE-----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=lxSz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a quirk that prevented Secondary Bus Reset for LSI / Agere
FW643.
We thought the device was broken, but the reset does work correctly
on other platforms, and the reset avoids leaking data out of VMs
(Bjorn Helgaas)
- Update MAINTAINERS to reflect that Gustavo Pimentel is no longer
reachable (Manivannan Sadhasivam)
* tag 'pci-v6.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: Mark LSI FW643 to avoid bus reset"
MAINTAINERS: Drop Gustavo Pimentel as PCI DWC Maintainer
-----BEGIN PGP SIGNATURE-----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=rCiN
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240412' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- UAF fix (Yu)
- Avoid out-of-bounds shift in blk-iocost (Rik)
- Fix for q->blkg_list corruption (Ming)
- Relax virt boundary mask/size segment checking (Ming)
* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
block: fix that blk_time_get_ns() doesn't update time after schedule
block: allow device to have both virt_boundary_mask and max segment size
block: fix q->blkg_list corruption during disk rebind
blk-iocost: avoid out of bounds shift
raid1: fix use-after-free for original bio in raid1_write_request()
-----BEGIN PGP SIGNATURE-----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=M7Ul
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for sigmask restoring while waiting for events (Alexey)
- Typo fix in comment (Haiyue)
- Fix for a msg_control retstore on SEND_ZC retries (Pavel)
* tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux:
io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE
io_uring/net: restore msg_control on sendzc retry
io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmYZXkYTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziyLNCACkJv5GjDeHC22P+UB6re3gO39wdFsL
BvHmhyebz5iidjS1l6pC/RcLOmB+OwekOiDfFvkwu0E+3d5dZTBInUV4BWzbJVLR
Hkjd+oCEThV+f58n2Ol/r6lBGIFCgJpgtW02DQurM8wHTLm/vqxpj2GsvJCRXNr6
lfqWVvZBteEmqxHUGNWldOQh2jNPGyvOpDRCQTzdjEfUAijoc8arLyuwbxl9tFdA
qVtCZk+Jv0Lz9uQUSsI7aM+SEXUgGW3pZXJL9h9PPjC9d811GCwQnUcL4hNE2B3X
Nf5Qzo9jV2GKJh8+kHui0dmpt0dMQfFZ2YaeJDZl8c8dE2uqBL+zMO79
=mvie
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two CephFS fixes marked for stable and a MAINTAINERS update"
* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
MAINTAINERS: remove myself as a Reviewer for Ceph
ceph: switch to use cap_delay_lock for the unlink delay list
ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
Commit d96c36004e ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.
It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.
In fact, let's make such breakage more obvious than some esoteric ftrace
record size option. If you can't parse tabs, you can't have page sizes.
Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard. But no, that does not
mean that it's ok.
I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary. But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.
Fixes: d96c36004e ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix the buffer_percent accounting as it is dependent on three variables:
1) pages_read - number of subbuffers read
2) pages_lost - number of subbuffers lost due to overwrite
3) pages_touched - number of pages that a writer entered
These three counters only increment, and to know how many active pages
there are on the buffer at any given time, the pages_read and
pages_lost are subtracted from pages_touched. But the pages touched
was incremented whenever any writer went to the next subbuffer even
if it wasn't the only one, so it was incremented more than it should
be causing the counter for how many subbuffers currently have content
incorrect, which caused the buffer_percent that holds waiters until
the ring buffer is filled to a given percentage to wake up early.
- Fix warning of unused functions when PERF_EVENTS is not configured in
- Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
- Fix to some kerneldoc function comments in eventfs code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZhk+khQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvs0AP98c226UFU6Dha4wvgSulC/wKVvHN3X
jeclMTdn8RGs2gD/b9OULKNv1//6fP16ZRun7ntRQkotVhlNhf9Ee0smiwU=
=UYrk
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the buffer_percent accounting as it is dependent on three
variables:
1) pages_read - number of subbuffers read
2) pages_lost - number of subbuffers lost due to overwrite
3) pages_touched - number of pages that a writer entered
These three counters only increment, and to know how many active
pages there are on the buffer at any given time, the pages_read and
pages_lost are subtracted from pages_touched.
But the pages touched was incremented whenever any writer went to the
next subbuffer even if it wasn't the only one, so it was incremented
more than it should be causing the counter for how many subbuffers
currently have content incorrect, which caused the buffer_percent
that holds waiters until the ring buffer is filled to a given
percentage to wake up early.
- Fix warning of unused functions when PERF_EVENTS is not configured in
- Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
- Fix to some kerneldoc function comments in eventfs code.
* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Only update pages_touched when a new page is touched
tracing: hide unused ftrace_event_id_fops
tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
eventfs: Fix kernel-doc comments to functions
-----BEGIN PGP SIGNATURE-----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=fJiH
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix for syscall_get_nr() to make it work even if tracing is disabled"
* tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: scall: Save thread_info.syscall unconditionally on entry
client:
- Protect connector modes with mode_config mutex
ast:
- Fix soft lockup
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
i915:
- Couple CDCLK programming fixes
- HDCP related fix
- 4 Bigjoiner related fixes
- Fix for a circular locking around GuC on reset+wedged case
xe:
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
msm:
- DP refcount leak fix on disconnect
- Add missing newlines to prints in msm_fb and msm_kms
- fix dpu debugfs entry permissions
- Fix the interface table for the catalog of X1E80100
- fix irq message printing
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
- fix ioctl integer overflow
-----BEGIN PGP SIGNATURE-----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=tDFk
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Looks like everyone woke up after holidays, this weeks pull has a
bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
i915/xe have a few, a bunch of msm fixes, then some scattered driver
fixes.
I expect things will settle down for rc5.
client:
- Protect connector modes with mode_config mutex
ast:
- Fix soft lockup
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
i915:
- Couple CDCLK programming fixes
- HDCP related fix
- 4 Bigjoiner related fixes
- Fix for a circular locking around GuC on reset+wedged case
xe:
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
msm:
- DP refcount leak fix on disconnect
- Add missing newlines to prints in msm_fb and msm_kms
- fix dpu debugfs entry permissions
- Fix the interface table for the catalog of X1E80100
- fix irq message printing
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
- fix ioctl integer overflow"
* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
amdkfd: use calloc instead of kzalloc to avoid integer overflow
drm/xe: Label RING_CONTEXT_CONTROL as masked
drm/xe/xe_migrate: Cast to output precision before multiplying operands
drm/xe/hwmon: Cast result to output precision on left shift of operand
drm/xe/display: Fix double mutex initialization
drm/amdgpu: differentiate external rev id for gfx 11.5.0
drm/amd/display: Adjust dprefclk by down spread percentage.
drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
drm/amd/display: fix disable otg wa logic in DCN316
drm/amd/display: Do not recursively call manual trigger programming
drm/amd/display: always reset ODM mode in context when adding first plane
drm/amdgpu: fix incorrect number of active RBs for gfx11
drm/amd/display: Return max resolution supported by DWB
amd/amdkfd: sync all devices to wait all processes being evicted
drm/amdgpu: clear set_q_mode_offs when VM changed
drm/amdgpu: Fix VCN allocation in CPX partition
drm/amd/pm: fix the high voltage issue after unload
drm/amd/display: Skip on writeback when it's not applicable
drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
...
While monitoring the throttle time of IO from iocost, it's found that
such time is always zero after the io_schedule() from ioc_rqos_throttle,
for example, with the following debug patch:
+ printk("%s-%d: %s enter %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
while (true) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (wait.committed)
break;
io_schedule();
}
+ printk("%s-%d: %s exit %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
It can be observerd that blk_time_get_ns() always return the same time:
[ 1068.096579] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.272587] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.274389] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.472690] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.474485] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.672656] fio-1268: ioc_rqos_throttle exit 1067901962288
[ 1068.674451] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.872655] fio-1268: ioc_rqos_throttle exit 1067901962288
And I think the root cause is that 'PF_BLOCK_TS' is always cleared
by blk_flush_plug() before scheduel(), hence blk_plug_invalidate_ts()
will never be called:
blk_time_get_ns
plug->cur_ktime = ktime_get_ns();
current->flags |= PF_BLOCK_TS;
io_schedule:
io_schedule_prepare
blk_flush_plug
__blk_flush_plug
/* the flag is cleared, while time is not */
current->flags &= ~PF_BLOCK_TS;
schedule
sched_update_worker
/* the flag is not set, hence plug->cur_ktime is not cleared */
if (tsk->flags & PF_BLOCK_TS)
blk_plug_invalidate_ts()
blk_time_get_ns
/* got the time stashed before schedule */
return plug->cur_ktime;
Fix the problem by clearing cached time in __blk_flush_plug().
Fixes: 06b23f92af ("block: update cached timestamp post schedule/preemption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240411032349.3051233-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf15 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
Nicolas Pitre