Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Pull turbostat updates from Len Brown:
"Only updating the turbostat tool here, no kernel changes"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.07.28
tools/power turbostat: do not decode ACC for ICX and SPR
tools/power turbostat: fix SPR PC6 limits
tools/power turbostat: cleanup 'automatic_cstate_conversion_probe()'
tools/power turbostat: separate SPR from ICX
tools/power turbosstat: fix comment
tools/power turbostat: Support RAPTORLAKE P
tools/power turbostat: add support for ALDERLAKE_N
tools/power turbostat: dump secondary Turbo-Ratio-Limit
tools/power turbostat: simplify dump_turbo_ratio_limits()
tools/power turbostat: dump CPUID.7.EDX.Hybrid
tools/power turbostat: update turbostat.8
tools/power turbostat: Show uncore frequency
tools/power turbostat: Fix file pointer leak
tools/power turbostat: replace strncmp with single character compare
tools/power turbostat: print the kernel boot commandline
tools/power turbostat: Introduce support for RaptorLake
The ACC (automatic C-state conversion) feature was available on Sky Lake and
Cascade Lake Xeons (SKX and CLX), but it is not available on Ice Lake and
Sapphire Rapids Xeons (ICX and SPR). Therefore, stop decoding it for ICX and
SPR.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Sapphire Rapids Xeon (SPR) supports 2 flavors of PC6 - PC6N (non-retention) and
PC6R (retention). Before this patch we used ICX package C-state limits, which
was wrong, because ICX has only one PC6 flavor. With this patch, we use SKX PC6
limits for SPR, because they are the same.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The 'automatic_cstate_conversion_probe()' function has a too long 'if'
statement, convert it to a 'switch' statement in order to improve code
readability a bit.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Before this patch, SPR platform was considered identical to ICX platform. This
patch separates SPR support from ICX.
This patch is a preparation for adding SPR-specific package C-state limits
support.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Intel Performance Hybrid processors have a 2nd MSR
describing the turbo limits enforced on the Ecores.
Note, TRL and Secondary-TRL are usually R/O information,
but on overclock-capable parts, they can be written.
Signed-off-by: Len Brown <len.brown@intel.com>
When CONFIG_INTEL_UNCORE_FREQ_CONTROL is effective,
(Linux 5.9 and later), print the current (and default)
min and max uncore frequency limits.
When that driver provides the current uncore frequency
(Linux 5.18 and later), print a UncMHz column
reflecting the current uncore frequency.
Note that UncMHz is an instantaneous sample, not an average.
eg.
$ sudo ./turbostat -S --show frequency
...
Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz)
...
Avg_MHz Busy% Bzy_MHz TSC_MHz UncMHz
28 0.70 4049 3095 3900
Signed-off-by: Len Brown <len.brown@intel.com>
Currently if a fscanf fails then an early return leaks an open
file pointer. Fix this by fclosing the file before the return.
Detected using static analysis with cppcheck:
tools/power/x86/turbostat/turbostat.c:2039:3: error: Resource leak: fp [resourceLeak]
Fixes: eae97e053f ("tools/power turbostat: Support thermal throttle count print")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Using strncmp for a single character comparison is overly complicated,
just use a simpler single character comparison instead. Also stops
static analyzers (such as cppcheck) from complaining about strncmp on
non-null terminated strings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It would be handy to have cmdline in turbostat output. For example,
according to the turbostat output, there are no C-states requested.
In this case the user is very curious if something like
intel_idle.max_cstate=0 was used, or may be idle=none too. It is
also curious whether things like intel_pstate=nohwp were used.
Print the boot command line accordingly:
turbostat version 21.05.04 - Len Brown <lenb@kernel.org>
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0+ root=UUID=
b42359ed-1e05-42eb-8757-6bf2a1c19070 ro quiet splash vt.handoff=7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Remove an unneeded semicolon.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Change > MAX_DIE_PER_PACKAGE to >= MAX_DIE_PER_PACKAGE to prevent
accessing one element beyond the end of the array.
Fixes: 7fd786dfbd ("tools/power/x86/intel-speed-select: OOB daemon mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
bootgraph:
- fix parsing of /proc/version to be much more flexible
- check kernel version to disallow ftrace on anything older than 4.10
sleepgraph:
- include fix to bugzilla 212761 in case it regresses
- fix for -proc bug: https://github.com/intel/pm-graph/pull/20
- add -debugtiming arg to get timestamps on prints
- allow use of the netfix tool hosted in the github repo
- read s0ix data from pmc_core for better debug
- include more system data in the output log
- Do a better job testing input files useability
- flag more error data from dmesg in the timeline
- pre-parse the trace log to fix any ordering issues
- add new parser to process dmesg only timelines
- remove superflous sleep(5) in multitest mode
config/custom-timeline-functions.cfg:
- change some names to keep up to date
README:
- new version, small wording changes
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on the normalized pattern:
licensed under the gpl v2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
* Add support for the Windows 11 _OSI string (Mario Limonciello)
* Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
* iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).
* iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
Descriptor (Piotr Maziarz).
* iASL: NHLT: Rename linux specific strucures to device_info (Piotr
Maziarz).
* Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).
* Clean up double word in comment (Tom Rix).
* Update copyright notices to the year 2022 (Bob Moore).
* Remove some tabs and // comments - automated cleanup (Bob Moore).
* Replace zero-length array with flexible-array member (Gustavo A. R.
Silva).
* Interpreter: Add units to time variable names (Paul Menzel).
* Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
* Inform users about ACPI spec violation related to sleep length (Paul
Menzel).
* iASL/MADT: Add OEM-defined subtable (Bob Moore).
* Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
* Updates for revision E.d of IORT (Shameer Kolothum).
* Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero
page (Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner).
-----BEGIN PGP SIGNATURE-----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=XH6/
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA kernel code to upstream revision 20220331,
improve handling of PCI devices that are in D3cold during system
initialization, add support for a few features, fix bugs and clean up
code.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20220331
including the following changes:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr
Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of
Endpoint Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info
(Piotr Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob
Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob
Moore).
- Replace zero-length array with flexible-array member (Gustavo
A. R. Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length
(Paul Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Improve debug messages in the ACPI device PM code (Rafael Wysocki).
- Block ASUS B1400CEAE from suspend to idle by default (Mario
Limonciello).
- Improve handling of PCI devices that are in D3cold during system
initialization (Rafael Wysocki).
- Fix BERT error region memory mapping (Lorenzo Pieralisi).
- Add support for NVIDIA 16550-compatible port subtype to the SPCR
parsing code (Jeff Brasen).
- Use static for BGRT_SHOW kobj_attribute defines (Tom Rix).
- Fix missing prototype warning for acpi_agdi_init() (Ilkka
Koskinen).
- Fix missing ERST record ID in the APEI code (Liu Xinpeng).
- Make APEI error injection to refuse to inject into the zero page
(Tony Luck).
- Correct description of INT3407 / INT3532 DPTF attributes in sysfs
(Sumeet Pawnikar).
- Add support for high frequency impedance notification to the DPTF
driver (Sumeet Pawnikar).
- Make mp_config_acpi_gsi() a void function (Li kunyu).
- Unify Package () representation for properties in the ACPI device
properties documentation (Andy Shevchenko).
- Include UUID in _DSM evaluation warning (Michael Niewöhner)"
* tag 'acpi-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (41 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPI: utils: include UUID in _DSM evaluation warning
ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default
x86: ACPI: Make mp_config_acpi_gsi() a void function
ACPI: DPTF: Add support for high frequency impedance notification
ACPI: AGDI: Fix missing prototype warning for acpi_agdi_init()
ACPI: bus: Avoid non-ACPI device objects in walks over children
ACPI: DPTF: Correct description of INT3407 / INT3532 attributes
ACPI: BGRT: use static for BGRT_SHOW kobj_attribute defines
ACPI, APEI, EINJ: Refuse to inject into the zero page
ACPI: PM: Always print final debug message in acpi_device_set_power()
ACPI: SPCR: Add support for NVIDIA 16550-compatible port subtype
ACPI: docs: enumeration: Unify Package () for properties (part 2)
ACPI: APEI: Fix missing ERST record id
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
...
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Merge ACPICA material for 5.19-rc1:
- Add support for the Windows 11 _OSI string (Mario Limonciello)
- Add the CFMWS subtable to the CEDT table (Lawrence Hileman).
- iASL: NHLT: Treat Terminator as specific_config (Piotr Maziarz).
- iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint
Descriptor (Piotr Maziarz).
- iASL: NHLT: Rename linux specific strucures to device_info (Piotr
Maziarz).
- Add new ACPI 6.4 semantics to Load() and LoadTable() (Bob Moore).
- Clean up double word in comment (Tom Rix).
- Update copyright notices to the year 2022 (Bob Moore).
- Remove some tabs and // comments - automated cleanup (Bob Moore).
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva).
- Interpreter: Add units to time variable names (Paul Menzel).
- Add support for ARM Performance Monitoring Unit Table (Besar
Wicaksono).
- Inform users about ACPI spec violation related to sleep length (Paul
Menzel).
- iASL/MADT: Add OEM-defined subtable (Bob Moore).
- Interpreter: Fix some typo mistakes (Selvarasu Ganesan).
- Updates for revision E.d of IORT (Shameer Kolothum).
- Use ACPI_FORMAT_UINT64 for 64-bit output (Bob Moore).
- Update version to 20220331 (Bob Moore).
* acpica: (21 commits)
Revert "ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms"
ACPICA: Update version to 20220331
ACPICA: exsystem.c: Use ACPI_FORMAT_UINT64 for 64-bit output
ACPICA: IORT: Updates for revision E.d
ACPICA: executer/exsystem: Fix some typo mistakes
ACPICA: iASL/MADT: Add OEM-defined subtable
ACPICA: executer/exsystem: Warn about sleeps greater than 10 ms
ACPICA: executer/exsystem: Inform users about ACPI spec violation
ACPICA: Add support for ARM Performance Monitoring Unit Table.
ACPICA: executer/exsystem: Add units to time variable names
ACPICA: Headers: Replace zero-length array with flexible-array member
ACPICA: Removed some tabs and // comments
ACPICA: Update copyright notices to the year 2022
ACPICA: Clean up double word in comment
ACPICA: Add new ACPI 6.4 semantics for LoadTable() operator
ACPICA: Add new ACPI 6.4 semantics to the Load() operator
ACPICA: iASL: NHLT: Rename linux specific strucures to device_info
ACPICA: iASL: NHLT: Fix parsing undocumented bytes at the end of Endpoint Descriptor
ACPICA: iASL: NHLT: Treat Terminator as specific_config
ACPICA: Add the subtable CFMWS to the CEDT table
...
Initialize perf_cap struct to avoid warning:
CC hfi-events.o
In function ‘process_hfi_event’,
inlined from ‘handle_event’ at hfi-events.c:220:5:
hfi-events.c:184:9: warning: ‘perf_cap.cpu’ may be used
uninitialized [-Wmaybe-uninitialized]
184 | process_level_change(perf_cap->cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hfi-events.c: In function ‘handle_event’:
hfi-events.c:193:25: note: ‘perf_cap.cpu’ was declared here
193 | struct perf_cap perf_cap;
| ^~~~~~~~
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171208.211319-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For Intel SST turbo-freq feature to be enabled, the turbo mode on the
platform must be enabled also. If turbo mode is disabled, display error
while enabling turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023421.3930540-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
Don't exit if used this way:
sudo setcap cap_sys_nice,cap_sys_rawio=+ep ./turbostat
sudo chmod +r /dev/cpu/*/msr
./turbostat
note: cap_sys_admin is now also needed for the perf IPC counter:
sudo setcap cap_sys_admin,cap_sys_nice,cap_sys_rawio=+ep ./turbostat
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Toby Broom <tbroom@outlook.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The turbostat data is collected by end user for power evaluationit. However
it looks like we are missing enough thermal context there. Already a couple of
time we found that power management developer asking something like this:
grep -r . /sys/devices/system/cpu/cpu*/thermal_throttle/*
Print the per core thermal throttle count so as to get suffificent thermal
context.
turbostat -i 5 -s Core,CPU,CoreThr
Core CPU CoreThr
- - 104
0 0 61
0 4
1 1 0
1 5
2 2 104
2 6
3 3 7
3 7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This gives the ability to reprint the header every N iterations, so you
can ensure that a scrolling display always has the header visible
somewhere on the screen.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there are a number of variables which are displayed by
default, enabled with -e all, and listed by --list, but which you can
not give to --enable/-e.
So you can enable CPU0c1 (in the bic array), but you can't enable C1 or
C1% (not in the bic array, but exists in sysfs).
This runs counter to both the documentation and user expectations, and
it's just not very user friendly.
As such, the mechanism used by --hide has been duplicated, and is now
also used by --enable, so we can handle unknown names gracefully.
Note: One impact of this is that truly unknown fields given to --enable
will no longer generate errors, they will be silently ignored, as --hide
does.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Print power values upto three decimal places in watts.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat --Dump exits early with status 243 (-13)
get_counters() calls get_msr_sum() on zen CPUS
for MSR_PKG_ENERGY_STAT, but per_cpu_msr_sum
has not been initialized.
Signed-off-by: Dan Merillat <git@dan.eginity.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPICA commit 738d7b0726e6c0458ef93c0a01c0377490888d1e
Affects all source modules and utility signons.
Link: https://github.com/acpica/acpica/commit/738d7b07
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Build of intel-speed-select will fail if you run:
$ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1
...
gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select
/usr/bin/ld: intel-speed-select-in.o: in function `handle_event':
(...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr'
...
In this case the problem is that order when linking matters when using
the flag -Wl,--as-needed, symbols not used at that point are discarded.
So since intel-speed-select-in.o comes after, at that point the
libraries/symbols are already discarded and then missing/undefined
references are reported.
To fix this, make sure we specify LDFLAGS after the object file.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user
space via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform
and fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's
Tsens driver and TI thermal platforms (Dmitry Baryshkov, Romain
Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT
binding (Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt
is optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=6PYL
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
Intel P-state tracer is a useful tool to tune and debug Intel P-state
driver. AMD P-state tracer import intel pstate tracer. This tool can
be used to analyze the performance of AMD P-state tracer.
Now CPU frequency, load and desired perf can be traced.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate_tracer as a module. Other trace event can import
this module to analyze their trace data.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'MSR_PKG_CST_CONFIG_CONTROL' encodes the deepest allowed package C-state limit,
and turbostat decodes it.
Before this patch: turbostat does not recognize value "3" on Ice Lake Xeon
(ICX) and Sapphire Rapids Xeon (SPR), treats it as "unknown", and does not
display any package C-states in the results table.
After this patch: turbostat recognizes value 3 on ICX and SPR, treats it as
"PC6", and correctly displays package C-states in the results table.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add "-c --perf" option in cpupower-frequency-info to get the performance
and frequency values for AMD P-State.
Commit message amended:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
