Commit graph

192 commits

Author SHA1 Message Date
Rafael J. Wysocki
fe583359dd Merge branches 'pm-pci', 'pm-sleep', 'pm-domains' and 'powercap'
* pm-pci:
  PCI: PM: Enable PME if it can be signaled from D3cold
  PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
  PCI: Use pci_update_current_state() in pci_enable_device_flags()

* pm-sleep:
  PM: sleep: unmark 'state' functions as kernel-doc
  PM: sleep: check RTC features instead of ops in suspend_test
  PM: sleep: s2idle: Replace deprecated CPU-hotplug functions

* pm-domains:
  PM: domains: Fix domain attach for CONFIG_PM_OPP=n
  arm64: dts: sc7180: Add required-opps for i2c
  PM: domains: Add support for 'required-opps' to set default perf state
  opp: Don't print an error if required-opps is missing

* powercap:
  powercap: Add Power Limit4 support for Alder Lake SoC
  powercap: intel_rapl: Replace deprecated CPU-hotplug functions
2021-08-30 19:25:42 +02:00
Rafael J. Wysocki
bc0d0b1dfe Merge back new PM domains material for v5.15. 2021-08-30 19:20:32 +02:00
Marijn Suijten
19526d092c opp: core: Check for pending links before reading required_opp pointers
Commit 4fa82a87ba ("opp: Allow required-opps to be used for non genpd
use cases") dereferences the pointers in required_opp_tables but these
might be set to an ERR_PTR if the list still has lazy links pending,
resulting in segfaults.  Prior to this patch IS_ERR was also checked on
required_opp_tables[i] before reading ->is_genpd inside
_opp_table_alloc_required_tables, which is at the same time the
predicate to add this table to the lazy list.  This segfault is solved
by reordering the checks to bail on lazy pending tables before reading
->is_genpd.

Fixes: 4fa82a87ba ("opp: Allow required-opps to be used for non genpd use cases")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-23 12:44:55 +05:30
Rajendra Nayak
020d86fc0d opp: Don't print an error if required-opps is missing
The 'required-opps' property is considered optional, hence remove
the pr_err() in of_parse_required_opp() when we find the property is
missing.
While at it, also fix the return value of
of_get_required_opp_performance_state() when of_parse_required_opp()
fails, return a -ENODEV instead of the -EINVAL.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-16 18:45:29 +02:00
Dmitry Osipenko
c3ddfe66d2 opp: Drop empty-table checks from _put functions
The current_opp is released only when whole OPP table is released,
otherwise it's only marked as removed by dev_pm_opp_remove_table().
Functions like dev_pm_opp_put_clkname() and dev_pm_opp_put_supported_hw()
are checking whether OPP table is empty and it's not if current_opp is
set since it holds the refcount of OPP, this produces a noisy warning
from these functions about busy OPP table. Remove the checks to fix it.

Cc: stable@vger.kernel.org
Fixes: 81c4d8a3c4 ("opp: Keep track of currently programmed OPP")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-16 09:42:08 +05:30
Michał Mirosław
335ffab3ef opp: remove WARN when no valid OPPs remain
This WARN can be triggered per-core and the stack trace is not useful.
Replace it with plain dev_err(). Fix a comment while at it.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-04 09:31:25 +05:30
Hsin-Yi Wang
4fa82a87ba opp: Allow required-opps to be used for non genpd use cases
Don't limit required_opp_table to genpd only. One possible use case is
cpufreq based devfreq governor, which can use required-opps property to
derive devfreq from cpufreq.

Though the OPP core still doesn't support non-genpd required-opps in
_set_required_opps().

Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Update _set_required_opps() to check for genpd ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-06-18 09:00:55 +05:30
Yang Yingliang
ac9fd3c803 opp: use list_del_init instead of list_del/INIT_LIST_HEAD
Using list_del_init() instead of list_del() + INIT_LIST_HEAD()
to simpify the code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-05-20 09:32:40 +05:30
Dmitry Osipenko
9edf48a4bf opp: Change return type of devm_pm_opp_attach_genpd()
Make devm_pm_opp_attach_genpd() to return error code instead of
opp_table pointer in order to have return type consistent with the
other resource-managed OPP helpers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16 10:14:11 +05:30
Dmitry Osipenko
c41c8a3485 opp: Change return type of devm_pm_opp_register_set_opp_helper()
Make devm_pm_opp_register_set_opp_helper() to return error code instead
of opp_table pointer in order to have return type consistent with the
other resource-managed OPP helpers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-16 10:14:11 +05:30
Yangtao Li
3d5cfbb695 opp: Add devres wrapper for dev_pm_opp_of_add_table
Add devres wrapper for dev_pm_opp_of_add_table() to simplify drivers
code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15 09:26:53 +05:30
Yangtao Li
9c4f220f3d opp: Add devres wrapper for dev_pm_opp_set_supported_hw
Add devres wrapper for dev_pm_opp_set_supported_hw() to simplify drivers
code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15 09:26:53 +05:30
Yangtao Li
32aee78bc5 opp: Add devres wrapper for dev_pm_opp_set_regulators
Add devres wrapper for dev_pm_opp_set_regulators() to simplify drivers
code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15 09:26:53 +05:30
Yangtao Li
a74f681c37 opp: Add devres wrapper for dev_pm_opp_set_clkname
Add devres wrapper for dev_pm_opp_set_clkname() to simplify drivers code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-15 09:26:53 +05:30
Beata Michalska
606a5d4227 opp: Don't drop extra references to OPPs accidentally
We are required to call dev_pm_opp_put() from outside of the
opp_table->lock as debugfs removal needs to happen lock-less to avoid
circular dependency issues.

commit cf1fac943c ("opp: Reduce the size of critical section in
_opp_kref_release()") tried to fix that introducing a new routine
_opp_get_next() which keeps returning OPPs that can be freed by the
callers and this routine shall be called without holding the
opp_table->lock.

Though the commit overlooked the fact that the OPPs can be referenced by
other users as well and this routine will end up dropping references
which were taken by other users and hence freeing the OPPs prematurely.

In effect, other users of the OPPs will end up having invalid pointers
at hand. We didn't see any crash reports earlier as the exact situation
never happened, though it is certainly possible.

We need a way to mark which OPPs are no longer referenced by the OPP
core, so we don't drop extra references to them accidentally.

This commit adds another OPP flag, "removed", which is used to track
this. And now we should never end up dropping extra references to the
OPPs.

Cc: v5.11+ <stable@vger.kernel.org> # v5.11+
Fixes: cf1fac943c ("opp: Reduce the size of critical section in _opp_kref_release()")
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
[ Viresh: Almost rewrote entire patch, added new "removed" field,
	  rewrote commit log and added the correct Fixes tag. ]
Co-developed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-12 09:26:52 +05:30
Jonathan Marek
de04241ab8 opp: Don't skip freq update for different frequency
We skip the OPP update if the current and target OPPs are same. This is
fine for the devices that don't support frequency but may cause issues
for the ones that need to program frequency.

An OPP entry doesn't really signify a single operating frequency but
rather the highest frequency at which the other properties of the OPP
entry apply. And we may reach here with different frequency values,
while all of them would point to the same OPP entry in the OPP table.

We just need to update the clock frequency in that case, though in order
to not add special exit points we reuse the code flow from a normal
path.

While at it, rearrange the conditionals in the 'if' statement to check
'enabled' flag at the end.

Fixes: 81c4d8a3c4 ("opp: Keep track of currently programmed OPP")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[ Viresh: Improved commit log and subject, rename current_freq as
	  current_rate, document it, remove local variable and rearrange
	  code. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-18 12:31:08 +05:30
Saravana Kannan
7d8658ef65 OPP: Add function to look up required OPP's for a given OPP
Add a function that allows looking up required OPPs given a source OPP
table, destination OPP table and the source OPP.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[ Viresh: Rearranged code, fixed return errors ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-04 16:30:14 +05:30
Viresh Kumar
d4a4c7a411 opp: Don't ignore clk_get() errors other than -ENOENT
Not all devices that need to use OPP core need to have clocks, a missing
clock is fine in which case -ENOENT shall be returned by clk_get().

Anything else is an error and must be handled properly.

Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:30:53 +05:30
Viresh Kumar
870d5d9639 opp: Update bandwidth requirements based on scaling up/down
The bandwidth must be scaled at a different point in the code flow based
on if we are scaling up or down the frequency, otherwise this may cause
undesired effects as the device will try to use more of the memory
bandwidth which may be shared across several devices. Much like how
regulators and required-opps are programmed.

Reported-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:30:53 +05:30
Viresh Kumar
7eba0c7641 opp: Allow lazy-linking of required-opps
The OPP core currently requires the required opp tables to be available
before the dependent OPP table is added, as it needs to create links
from the dependent OPP table to the required ones. This may not be
convenient for all the platforms though, as this requires strict
ordering for probing the drivers.

This patch allows lazy-linking of the required-opps. The OPP tables for
which the required-opp-tables aren't available at the time of their
initialization, are added to a special list of OPP tables:
lazy_opp_tables. Later on, whenever a new OPP table is registered with
the OPP core, we check if it is required by an OPP table in the pending
list; if yes, then we complete the linking then and there.

An OPP table is marked unusable until the time all its required-opp
tables are available. And if lazy-linking fails for an OPP table, the
OPP core disables all of its OPPs to make sure no one can use them.

Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:30:53 +05:30
Viresh Kumar
240ae50e23 opp: Remove dev_pm_opp_set_bw()
All the users have migrated to dev_pm_opp_set_opp() now, get rid of the
duplicate API, dev_pm_opp_set_bw(), which only performs a part of the new API.

While at it, remove the unnecessary parameter to _set_opp_bw().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:30:53 +05:30
Viresh Kumar
abbe348340 opp: Implement dev_pm_opp_set_opp()
The new helper dev_pm_opp_set_opp() can be used for configuring the
devices for a particular OPP and can be used by different type of
devices, even the ones which don't change frequency (like power
domains).

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:28:07 +05:30
Viresh Kumar
509e4777ca opp: Update parameters of _set_opp_custom()
Drop the unnecessary parameters and follow the pattern from
_generic_set_opp_regulator().

While at it, also remove the local variable old_freq.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:28:03 +05:30
Viresh Kumar
35e74b2ee8 opp: Allow _generic_set_opp_clk_only() to work for non-freq devices
In order to avoid conditional statements at the caller site, this patch
updates _generic_set_opp_clk_only() to work for devices that don't
change frequency (like power domains, etc.). Return 0 if the clk pointer
passed to this routine is not valid.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:28:01 +05:30
Viresh Kumar
3f62670fcc opp: Allow _generic_set_opp_regulator() to work for non-freq devices
The _generic_set_opp_regulator() helper will be used for devices which
don't change frequency (like power domains, etc.) later on, prepare for
that by not relying on frequency for making decisions here.

While at it, update its parameters to pass only what is necessary.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:28:00 +05:30
Viresh Kumar
f0b88fa455 opp: Allow _set_opp() to work for non-freq devices
The _set_opp() helper will be used for devices which don't change frequency
(like power domains, etc.) later on, prepare for that by not relying on
frequency for making decisions here.

While at it, also update the debug print to contain all relevant
information.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:58 +05:30
Viresh Kumar
386ba854d9 opp: Split _set_opp() out of dev_pm_opp_set_rate()
The _set_opp() helper will be used for devices which don't change their
frequency (like power domains, etc.) later on, prepare for that by
breaking the generic part out of dev_pm_opp_set_rate().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:55 +05:30
Viresh Kumar
81c4d8a3c4 opp: Keep track of currently programmed OPP
The dev_pm_opp_set_rate() helper needs to know the currently programmed
OPP to make few decisions and currently we try to find it on every
invocation of this routine.

Lets start keeping track of the current_opp programmed for the devices
of the opp table, that will be quite useful going forward.

If we fail to find the current OPP, we pick the first one available in
the list, as the list is in ascending order of frequencies, level, or
bandwidth and that's the best guess we can make anyway.

Note that we used to do the frequency comparison a bit early in
dev_pm_opp_set_rate() previously, and now instead we check the target
opp, which shall be more accurate anyway.

We need to make sure that current_opp's memory doesn't get freed while
it is being used and so we keep a reference of it until the time it is
used.

Now that current_opp will always be set, we can drop some unnecessary
checks as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:52 +05:30
Viresh Kumar
1d3c42cabb opp: No need to check clk for errors
Clock is not optional for users who call into dev_pm_opp_set_rate().
Remove the unnecessary checks.

While at it also drop the local variable for clk and use opp_table->clk
instead.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:50 +05:30
Viresh Kumar
5ad58bbacf opp: Rename _opp_set_rate_zero()
This routine has nothing to do with frequency, it just disables all the
resources previously enabled. Rename it to match its purpose.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:46 +05:30
Dmitry Osipenko
04b447df1d opp: Make _set_opp_custom() work without regulators
Check whether OPP table has regulators in _set_opp_custom() and set up
dev_pm_set_opp_data accordingly. Now _set_opp_custom() works properly,
i.e. it doesn't crash if OPP table doesn't have assigned regulators.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Rearrange the routine a bit ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:43 +05:30
Viresh Kumar
38bb343938 opp: Prepare for ->set_opp() helper to work without regulators
Until now the ->set_opp() helper (i.e. special implementation for
setting the OPPs for platforms) was implemented only to take care of
multiple regulators case, but going forward we would need that for other
use cases as well.

This patch prepares for that by allocating the regulator specific part
from dev_pm_opp_set_regulators() and the opp helper part from
dev_pm_opp_register_set_opp_helper().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:39 +05:30
Dmitry Osipenko
b6ecd5d4f6 opp: Print OPP level in debug message of _opp_add_static_v2()
Print OPP level in debug message of _opp_add_static_v2(). This helps to
chase GENPD bugs.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:36 +05:30
Dmitry Osipenko
f2f4d2b86f opp: Handle missing OPP table in dev_pm_opp_xlate_performance_state()
NVIDIA Tegra SoCs have a power domains topology such that child domains
only clamp a power rail, while parent domain controls shared performance
state of the multiple child domains. In this case child's domain doesn't
need to have OPP table. Hence we want to allow children power domains to
pass performance state to the parent domain if child's domain doesn't have
OPP table.

The dev_pm_opp_xlate_performance_state() gets src_table=NULL if a child
power domain doesn't have OPP table and in this case we should pass the
performance state to the parent domain.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:34 +05:30
Dmitry Osipenko
b4b9e223ec opp: Add devm_pm_opp_attach_genpd
Add resource-managed version of dev_pm_opp_attach_genpd().

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Manually apply the patch and relocate the routines ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:32 +05:30
Dmitry Osipenko
a3c47af694 opp: Add devm_pm_opp_register_set_opp_helper
Add resource-managed version of dev_pm_opp_register_set_opp_helper().

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Manually apply the patch and relocate the routines ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:30 +05:30
Viresh Kumar
559fef0dfd opp: Add dev_pm_opp_of_add_table_noclk()
A few drivers have device's clk but they don't want the OPP core to
handle that. Add a new helper for them, dev_pm_opp_of_add_table_noclk().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:26 +05:30
Viresh Kumar
32439ac753 opp: Defer acquiring the clk until OPPs are added
We acquire the clk at the time the OPP table is allocated, though it
works fine, it is not the best place to do so. One of the main reason
being we may need to acquire it again from dev_pm_opp_set_clkname() if
the platform wants another clock to be acquired instead.

There is also requirement from some of the platforms where they do not
want the OPP core to manage the clock at all.

This patch hence defers acquiring the clk until the time we are certain
about which clk we need to acquire and if we really need to acquire one.
With this commit, the clk will get acquired either from
dev_pm_opp_set_clkname() or while we initialize the OPPs within the
table.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:20 +05:30
Viresh Kumar
406e476521 opp: Create _of_add_table_indexed() to reduce code duplication
The implementation of dev_pm_opp_of_add_table() and
dev_pm_opp_of_add_table_indexed() are almost identical. Create
_of_add_table_indexed() to reduce code redundancy.

Also remove the duplication of the doc style comments by referring to
dev_pm_opp_of_add_table() from dev_pm_opp_of_add_table_indexed().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
2021-02-02 10:27:06 +05:30
Dmitry Osipenko
ce8073d83f opp: Add dev_pm_opp_sync_regulators()
Extend OPP API with dev_pm_opp_sync_regulators() function, which syncs
voltage state of regulators.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Added unlikely() ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:05 +05:30
Dmitry Osipenko
597ff5431f opp: Add dev_pm_opp_get_required_pstate()
Add dev_pm_opp_get_required_pstate() which allows OPP users to retrieve
required performance state of a given OPP.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:04 +05:30
Dmitry Osipenko
8dd5cada39 opp: Add dev_pm_opp_find_level_ceil()
Add a ceil version of the dev_pm_opp_find_level(). It's handy to have if
levels don't start from 0 in OPP table and zero usually means a minimal
level.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:27:01 +05:30
Viresh Kumar
d758eaf5f8 opp: Staticize _add_opp_table()
_add_opp_table() isn't used outside of core.c, mark it static.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:26:58 +05:30
Dmitry Osipenko
d7b9d9b31a opp: Correct debug message in _opp_add_static_v2()
The debug message always prints rate=0 instead of a proper value, fix it.

Fixes: 6c591eec67 ("OPP: Add helpers for reading the binding properties")
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[ Viresh: Added Fixes tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:26:56 +05:30
Dmitry Osipenko
cf65948d62 opp: Filter out OPPs based on availability of a required-OPP
A required OPP may not be available, and thus, all OPPs which are using
this required OPP should be unavailable too.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:26:54 +05:30
Dmitry Osipenko
32715be4fe opp: Fix adding OPP entries in a wrong order if rate is unavailable
Fix adding OPP entries in a wrong (opposite) order if OPP rate is
unavailable. The OPP comparison was erroneously skipped, thus OPPs
were left unsorted.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-02-02 10:26:26 +05:30
Viresh Kumar
0e1d9ca176 opp: Call the missing clk_put() on error
Fix the clock reference counting by calling the missing clk_put() in the
error path.

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28 10:56:22 +05:30
Quanyang Wang
976509bb31 opp: fix memory leak in _allocate_opp_table
In function _allocate_opp_table, opp_dev is allocated and referenced
by opp_table via _add_opp_dev. But in the case that the subsequent calls
return -EPROBE_DEFER, it will jump to err label and opp_table will be
freed. Then opp_dev becomes an unreferenced object to cause memory leak.
So let's call _remove_opp_dev to do the cleanup.

This fixes the following kmemleak report:

unreferenced object 0xffff000801524a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s)
  hex dump (first 32 bytes):
    40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff  @.V.....@.V.....
    b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff  .Rw......<L.....
  backtrace:
    [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40
    [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588
    [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88
    [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268
    [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8
    [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0
    [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448
    [<0000000030a3a26c>] platform_probe+0x68/0xd8
    [<00000000c618e78d>] really_probe+0xd0/0x3a0
    [<00000000642e856f>] driver_probe_device+0x58/0xb8
    [<00000000f10f5307>] device_driver_attach+0x74/0x80
    [<0000000004f254b8>] __driver_attach+0x58/0xe0
    [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8
    [<0000000000d22e1c>] driver_attach+0x24/0x30
    [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0
    [<0000000089928aaa>] driver_register+0x64/0x120

Cc: v5.10 <stable@vger.kernel.org> # v5.10
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
[ Viresh: Added the stable tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28 10:55:52 +05:30
Rafael J. Wysocki
e1f1320fc0 Merge branch 'pm-cpufreq'
* pm-cpufreq: (31 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  firmware: arm_scmi: Add power_scale_mw_get() interface
  cpufreq: tegra194: Rename tegra194_get_speed_common function
  cpufreq: tegra194: Remove unnecessary frequency calculation
  cpufreq: tegra186: Simplify cluster information lookup
  cpufreq: tegra186: Fix sparse 'incorrect type in assignment' warning
  cpufreq: imx: fix NVMEM_IMX_OCOTP dependency
  cpufreq: vexpress-spc: Add missing MODULE_ALIAS
  cpufreq: scpi: Add missing MODULE_ALIAS
  cpufreq: loongson1: Add missing MODULE_ALIAS
  cpufreq: sun50i: Add missing MODULE_DEVICE_TABLE
  cpufreq: st: Add missing MODULE_DEVICE_TABLE
  cpufreq: qcom: Add missing MODULE_DEVICE_TABLE
  cpufreq: mediatek: Add missing MODULE_DEVICE_TABLE
  cpufreq: highbank: Add missing MODULE_DEVICE_TABLE
  ...
2020-12-15 15:24:52 +01:00
Viresh Kumar
2c07b0fd9b Merge branch 'opp/empty' into opp/linux-next 2020-12-09 11:24:12 +05:30