From looking at the PCI IDs, every device supported by intelfb is
also supported by i915. Anyone still using intelfb should please
move on to i915, which does everything intelfb does but better.
Removing intelfb is motivated by the driver's excessive use of the
global screen_info state. The state belongs to architecture and
firmware code; device drivers should not attempt to access it. But
fixing intelfb would require a significant change in the driver's
probing logic. As intelfb has been obsolete for nearly 2 decades,
it is probably not worth the effort. Let's just remove it. Also
remove the related documentation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=g+6E
-----END PGP SIGNATURE-----
Merge tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
There are no users with a vlynq_driver in the Kernel tree. Also, only
the AR7 platform ever initialized a VLYNQ bus, but AR7 is going to be
removed from the Kernel. OpenWRT had some out-of-tree drivers which they
probably intended to upport, but AR7 devices are even there not
supported anymore because they are "stuck with Kernel
3.18" [1]. This code can go.
[1] https://openwrt.org/docs/techref/targets/ar7
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
DPLL framework is used to represent and configure DPLL devices
in systems. Each device that has DPLL and can configure inputs
and outputs can use this framework.
Implement core framework functions for further interactions
with device drivers implementing dpll subsystem, as well as for
interactions of DPLL netlink framework part with the subsystem
itself.
Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been pointed out that naming a subsystem "genpd" isn't very
self-explanatory and the acronym itself that means Generic PM Domain, is
known only by a limited group of people.
In a way to improve the situation, let's rename the subsystem to pmdomain,
which ideally should indicate that this is about so called Power Domains or
"PM domains" as we often also use within the Linux Kernel terminology.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passes as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
and starts moving some of the corresponding code in there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the soc
maintainers (Arnd Bergmann, etc) in particular, but also to gain a better
overall view of what goes on in the area, I will help out with maintenance.
-----BEGIN PGP SIGNATURE-----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=Vp8b
-----END PGP SIGNATURE-----
Merge tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull ARM SoC generic power domain driver updates from Ulf Hansson:
"This adds a new subsystem for generic power domain providers in
drivers/genpd and starts moving some of the corresponding code in
there.
We have currently ~60 users of the genpd provider interface, which are
sprinkled across various subsystems. To release some burden from the
soc maintainers (Arnd Bergmann, etc) in particular, but also to gain a
better overall view of what goes on in the area, I will help out with
maintenance"
[ I find the "genpd" name singularly uninformative, so we'll probably
end up moving this driver subsystem somewhere else, but that's still
being discussed - Linus ]
* tag 'genpd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (30 commits)
genpd: ti: Use for_each_node_with_property() simplify code logic
genpd: Explicitly include correct DT includes
genpd: imx: scu-pd: initialize is_off according to HW state
genpd: imx: scu-pd: Suppress bind attrs
genpd: imx: scu-pd: do not power off console if no_console_suspend
genpd: imx: scu-pd: add more PDs
genpd: imx: scu-pd: enlarge PD range
genpd: imx: relocate scu-pd under genpd
MAINTAINERS: adjust file entry in STARFIVE JH71XX PMU CONTROLLER DRIVER
genpd: Makefile: build imx
genpd: move owl-sps-helper.c from drivers/soc
soc: starfive: remove stale Makefile entry
ARM: ux500: Move power-domain driver to the genpd dir
ARM: ux500: Convert power-domain code into a regular platform driver
soc: xilinx: Move power-domain driver to the genpd dir
soc: ti: Mover power-domain drivers to the genpd dir
soc: tegra: Move powergate-bpmp driver to the genpd dir
soc: sunxi: Move power-domain driver to the genpd dir
soc: starfive: Move the power-domain driver to the genpd dir
soc: samsung: Move power-domain driver to the genpd dir
...
There are currently ~60 users of the genpd provider interface, which
implementations are sprinkled across various subsystems. To simplify with
maintenance let's create a new subsystem (drivers/genpd) and start moving
the providers in there.
My intention is also to host a git tree to collect and to get the patches
tested/integrated through the linux-next tree. Ideally this should release
some of the burden on the soc maintainers.
Note that, I will of course require acks/reviews from the current platform
maintainers, hence the MAINTAINERS file needs to be updated accordingly for
each genpd provider that is moved into the new genpd subsystem.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce AMD CDX bus, which provides a mechanism for scanning
and probing CDX devices. These devices are memory mapped on
system bus for Application Processors(APUs).
CDX devices can be changed dynamically in the Fabric and CDX
bus interacts with CDX controller to rescan the bus and
rediscover the devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20230313132636.31850-2-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Change V=1 option to print both short log and full command log.
- Allow V=1 and V=2 to be combined as V=12.
- Make W=1 detect wrong .gitignore files.
- Tree-wide cleanups for unused command line arguments passed to Clang.
- Stop using -Qunused-arguments with Clang.
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag.
- Create Debian and RPM source packages without cleaning the source tree.
- Various cleanups for packaging.
-----BEGIN PGP SIGNATURE-----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=HpFZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
Removals:
- remove legacy dri1 drivers -
- i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmP2rKwACgkQDHTzWXnE
hr7cZw//WNBHajGXWUnuhh5GEd5QDiEzC5cazNT+QE9XFuv/ZT/AxchZ+v2zAYM7
uZ0VhRrWq7y2OZtNQjQ9LSTUE1vAjXwTH5roIKWQH4Xl4r2iPpqBMpvYppptOaoP
MEXqtTXAIjzxRPFFzXGuj4CnfsTUhLn8YM6roAJ+Q+banszxNL1XBPs8xO2isyko
6RFk4XHhIwhnL3GCCggNcxSQh2itZ6niytLXScO1YgoQ90eDVJl+RAEO14K10svL
Dq5tImbuwze06blM8xZxjDRtlNu/0n3Y1VC4oCDvEZHQFq7gfMk5rc1GpBAz9MUT
bBT9Ep4Q8Sp1xcyvxWSEDO8QV/C9y8Fr48CIfsJAxjtlLBuTvUZmSQI/jvoNeJmi
G3pFY6QmuEkl2W9uxPQusFlRVnPrlO0KFMORgxg9w95xqT9Rb2+F6dAauIjuiZLR
WgQPBy2wLxjxZek0am3U2b4B6EgPHLBEyfQge51Qh3EOL6rIZO3Yx+wAJVglTKRH
WzSyMRx0LQKyG4soE8P7V3KNBdsSgsjgq1I5fPyiJ4ck06d7jOD+BZVEfbAdz9Mi
eOxfCx3P83LCedKLfgQ652lc2BSgu+04N69/d06eNuSFbWgCl9Aw/4WmwGAQEP0w
B7w+Od20psq2ffEz7GwO8BP9c6K++a5PvlsvhiSYJqjkHndgcMY=
=HQUi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
* Small cleanup of the pata_octeon driver to drop a useless platform
callback, from Uwe.
* Simplify ata_scsi_cmd_error_handler() code using the fact that
ap->ops->error_handler is NULL most of the time, from Wenchao.
* Several patches improving libata error handling. This is in
preparation for supporting the command duration limits (CDL)
feature. The changes allow handling corner cases of ATA NCQ errors
which do not happen with regular drives but will be triggered with
CDL drives. From Niklas.
* Simplify the qc_fill_rtf operation, from me.
* Improve SCSI command translation for the
REPORT_SUPPORTED_OPERATION_CODES command, from me.
* Cleanup of libata FUA handling. This falls short of enabling FUA for
ATA drives that support it by default as there were concerns that
old drives would break. The series howeverfixes several issues with
the FUA support to ensure that FUA is reported as being supported
only for drives that can handle all possible write cases (NCQ and
non-NCQ). A check in the block layer is also added to ensure that we
never see read FUA commands (current behavior). From me.
* Several patches to move the old PARIDE (parallel port IDE) driver to
libata as pata_parport. Given that this driver also needs protocol
modules, the driver code resides in its own pata_parport directoy
under drivers/ata. From Ondrej.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCY/VTnQAKCRDdoc3SxdoY
dk77AQCA1frczKhcOFe2PK/FsFAiO9Nlx/snk7V95JdjVG8GlwEAkey7mvbXMfX0
fDbqpaCkWFb6SvwxdMSATlqUvwEpSQ8=
=tqQP
-----END PGP SIGNATURE-----
Merge tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
- Small cleanup of the pata_octeon driver to drop a useless platform
callback (Uwe)
- Simplify ata_scsi_cmd_error_handler() code using the fact that
ap->ops->error_handler is NULL most of the time (Wenchao)
- Several patches improving libata error handling. This is in
preparation for supporting the command duration limits (CDL) feature.
The changes allow handling corner cases of ATA NCQ errors which do
not happen with regular drives but will be triggered with CDL drives
(Niklas)
- Simplify the qc_fill_rtf operation (me)
- Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES
command (me)
- Cleanup of libata FUA handling.
This falls short of enabling FUA for ATA drives that support it by
default as there were concerns that old drives would break. The
series however fixes several issues with the FUA support to ensure
that FUA is reported as being supported only for drives that can
handle all possible write cases (NCQ and non-NCQ). A check in the
block layer is also added to ensure that we never see read FUA
commands (current behavior) (me)
- Several patches to move the old PARIDE (parallel port IDE) driver to
libata as pata_parport. Given that this driver also needs protocol
modules, the driver code resides in its own pata_parport directoy
under drivers/ata (Ondrej)
* tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: Fix ida_alloc return value error check
drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport
drivers/block: Remove PARIDE core and high-level protocols
ata: pata_parport: add driver (PARIDE replacement)
ata: libata: exclude FUA support for known buggy drives
ata: libata: Fix FUA handling in ata_build_rw_tf()
ata: libata: cleanup fua support detection
ata: libata: Rename and cleanup ata_rwcmd_protocol()
ata: libata: Introduce ata_ncq_supported()
block: add a sanity check for non-write flush/fua bios
ata: libata-scsi: improve ata_scsiop_maint_in()
ata: libata-scsi: do not overwrite SCSI ML and status bytes
ata: libata: move NCQ related ATA_DFLAGs
ata: libata: respect successfully completed commands during errors
ata: libata: read the shared status for successful NCQ commands once
ata: libata: simplify qc_fill_rtf port operation interface
ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH
ata: libata-eh: Cleanup ata_scsi_cmd_error_handler()
ata: octeon: Drop empty platform remove function
When device_hmem.o is enabled but dax itself is a loadable module, the
dax_hmem support fails to link because Kbuild never compiles built-in
code under drivers/dax:
ERROR: modpost: "walk_hmem_resources" [drivers/dax/hmem/dax_hmem.ko] undefined!
Make sure that drivers/dax is entered for compiling built-in code
even with CONFIG_DAX=m.
Fixes: 7dab174e2e ("dax/hmem: Move hmem device registration to dax_hmem.ko")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214131913.1431969-1-arnd@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
I added $(srctree)/ to some included Makefiles in the following commits:
- 3204a7fb98 ("kbuild: prefix $(srctree)/ to some included Makefiles")
- d828563955 ("kbuild: do not require sub-make for separate output tree builds")
They were a preparation for removing --include-dir flag.
I have never thought --include-dir useful. Rather, it _is_ harmful.
For example, run the following commands:
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
HOSTCC scripts/basic/fixdep
Error: kernelrelease not valid - run 'make prepare' to update it
UPD include/config/kernel.release
make[1]: Leaving directory '/tmp/linux/foo'
The first command configures the source tree for x86. The next command
tries to build ARM device trees in the separate foo/ directory - this
must stop because the directory foo/ has not been configured yet.
However, due to --include-dir=$(abs_srctree), the top Makefile includes
the wrong include/config/auto.conf from the source tree and continues
building. Kbuild traverses the directory tree, but of course it does
not work correctly. The Error message is also pointless - 'make prepare'
does not help at all for fixing the issue.
This commit fixes more arch Makefile, and finally removes --include-dir
from the top Makefile.
There are more breakages under drivers/, but I do not volunteer to fix
them all. I just moved --include-dir to drivers/Makefile.
With this commit, the second command will stop with a sensible message.
$ make -s ARCH=x86 mrproper defconfig
$ make ARCH=arm O=foo dtbs
make[1]: Entering directory '/tmp/linux/foo'
SYNC include/config/auto.conf.cmd
***
*** The source tree is not clean, please run 'make ARCH=arm mrproper'
*** in /tmp/linux
***
make[2]: *** [../Makefile:646: outputmakefile] Error 1
/tmp/linux/Makefile:770: include/config/auto.conf.cmd: No such file or directory
make[1]: *** [/tmp/linux/Makefile:793: include/config/auto.conf.cmd] Error 2
make[1]: Leaving directory '/tmp/linux/foo'
make: *** [Makefile:226: __sub-make] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Move PARIDE protocol modules out of drivers/block into
drivers/ata/pata_parport and update the CONFIG_ symbol names to
PATA_PARPORT.
[Damien]
The pata_parport driver file itsef is also moved together with the
protocol modules in drivers/ata/pata_parport.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The pata_parport is a libata-based replacement of the old PARIDE
subsystem - driver for parallel port IDE devices.
It uses the original paride low-level protocol drivers but does not
need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices
behind parallel port adapters are handled by the ATA layer.
This will allow paride and its high-level drivers to be removed.
Unfortunately, libata drivers cannot sleep so pata_parport claims
parport before activating the ata host and keeps it claimed (and
protocol connected) until the ata host is removed. This means that
no devices can be chained (neither other pata_parport devices nor
a printer).
paride and pata_parport are mutually exclusive because the compiled
protocol drivers are incompatible.
Tested with:
- Imation SuperDisk LS-120 and HP C4381A (EPAT)
- Freecom Parallel CD (FRPW)
- Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ)
- Backpack CD-RW 222011 and CD-RW 19350 (BPCK6)
The following bugs in low-level protocol drivers were found and will
be fixed later:
Note: EPP-32 mode is buggy in EPAT - and also in all other protocol
drivers - they don't handle non-multiple-of-4 block transfers
correctly. This causes problems with LS-120 drive.
There is also another bug in EPAT: EPP modes don't work unless a 4-bit
or 8-bit mode is used first (probably some initialization missing?).
Once the device is initialized, EPP works until power cycle.
So after device power on, you have to:
echo "parport0 epat 0" >/sys/bus/pata_parport/new_device
echo pata_parport.0 >/sys/bus/pata_parport/delete_device
echo "parport0 epat 4" >/sys/bus/pata_parport/new_device
(autoprobe will initialize correctly as it tries the slowest modes
first but you'll get the broken EPP-32 mode)
Note: EPP modes are buggy in FRPW, only modes 0 and 1 work.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Now that we have a subsystem for compute accelerators, move the
habanalabs driver to it.
This patch only moves the files and fixes the Makefiles. Future
patches will change the existing code to register to the accel
subsystem and expose the accel device char files instead of the
habanalabs device char files.
Update the MAINTAINERS file to reflect this change.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
VPU stands for Versatile Processing Unit and it's a CPU-integrated
inference accelerator for Computer Vision and Deep Learning
applications.
The VPU device consist of following components:
- Buttress - provides CPU to VPU integration, interrupt, frequency and
power management.
- Memory Management Unit (based on ARM MMU-600) - translates VPU to
host DMA addresses, isolates user workloads.
- RISC based microcontroller - executes firmware that provides job
execution API for the kernel-mode driver
- Neural Compute Subsystem (NCS) - does the actual work, provides
Compute and Copy engines.
- Network on Chip (NoC) - network fabric connecting all the components
This driver supports VPU IP v2.7 integrated into Intel Meteor Lake
client CPUs (14th generation).
Module sources are at drivers/accel/ivpu and module name is
"intel_vpu.ko".
This patch includes only very besic functionality:
- module, PCI device and IRQ initialization
- register definitions and low level register manipulation functions
- SET/GET_PARAM ioctls
- power up without firmware
Co-developed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117092723.60441-2-jacek.lawrynowicz@linux.intel.com
Currently, we step into drivers/hid/ based on the value of
CONFIG_HID.
However, that value is a tristate, meaning that it can be a module.
As per the documentation, if we jump into the subdirectory by
following an obj-m, we can not compile anything inside that
subdirectory in vmlinux. It is considered as a bug.
To make things more friendly to HID-BPF, split HID (the HID core
parameter) from HID_SUPPORT (do we want any kind of HID support in the
system?), and make this new config a boolean.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex integrated
Endpoint(RCiEP) device, providing the capability to dynamically monitor and
tune the PCIe traffic and trace the TLP headers.
Add the driver for the device to enable the trace function. Register PMU
device of PTT trace, then users can use trace through perf command. The
driver makes use of perf AUX trace function and support the following
events to configure the trace:
- filter: select Root port or Endpoint to trace
- type: select the type of traced TLP headers
- direction: select the direction of traced TLP headers
- format: select the data format of the traced TLP headers
This patch initially add basic trace support of PTT device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-3-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Here is the big set of staging driver patches for 6.0-rc1.
Another round where we removed more lines of code than added, always a
nice progression. Some of that came from the movement of the vme code
back into staging, and removal of some other of the vme driver code as
there are no known users and it is very obsolete and unmaintained. It
can be added back easily if someone offers to maintain it.
Other than that this merge has lots of little things:
- huge cleanups for r8188eu driver
- minor cleanups for other wifi drivers
- tiny loop fixes for greybus code
- other small coding style fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYuvPnA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn1wwCfTq1uo19O7mJ9S6ZZW1eIaJCEyW4AoKokANEO
lZNDNs6AYfKzzFymXYfa
=0ORk
-----END PGP SIGNATURE-----
Merge tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver patches for 6.0-rc1.
Another round where we removed more lines of code than added, always a
nice progression. Some of that came from the movement of the vme code
back into staging, and removal of some other of the vme driver code as
there are no known users and it is very obsolete and unmaintained. It
can be added back easily if someone offers to maintain it.
Other than that this merge has lots of little things:
- huge cleanups for r8188eu driver
- minor cleanups for other wifi drivers
- tiny loop fixes for greybus code
- other small coding style fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits)
staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c
staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup
staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function
staging: vt6655: Rename MACvClearStckDS
staging: fbtft: core: set smem_len before fb_deferred_io_init call
staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
staging: r8188eu: make dump_chip_info() static
staging: r8188eu: remove DoReserved prototype
staging: r8188eu: remove OnAtim prototype
staging: r8188eu: remove SetHwReg8188EU()
staging: r8188eu: make update_TSF() and correct_TSF() static
staging: r8188eu: remove unused parameter from update_TSF()
staging: r8188eu: remove unused parameter from correct_TSF()
staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
staging: pi433: remove duplicated comments
staging: qlge: refine variable name
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function
...
The ANDROID config symbol is only used to guard the binder config
symbol and to inject completely random config changes. Remove it
as it is obviously a bad idea.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629150102.1582425-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VME subsystem graduated from staging into a top-level subsystem in
2012, with commit db3b9e990e ("Staging: VME: move VME drivers out of
staging") stating:
The VME device drivers have not moved out yet due to some API
questions they are still working through, that should happen soon,
hopefully.
However, this never happened: maintenance of drivers/vme effectively
stopped in 2017, with all subsequent changes being treewide cleanups.
No hardware driver remains in staging, only the limited user-level
access, and I just removed one of the two bridge drivers and the only
remaining board.
drivers/staging/vme/devices/ was recently moved to
drivers/staging/vme_user/, but as the vme_user driver is the only one
remaining for this subsystem, it is easier to just move the remaining
three source files into this directory rather than keeping the original
hierarchy.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220606084109.4108188-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
This contains the new HTE subsystem that has been in the works for a
couple of months now. The infrastructure provided allows for drivers to
register as hardware timestamp providers, while consumers will be able
to request events that they are interested in (such as GPIOs and IRQs)
to be timestamped by the hardware providers.
Note that this currently supports only one provider, but there seems to
be enough interest in this functionality and we expect to see more
drivers added once this is merged.
-----BEGIN PGP SIGNATURE-----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=sOJn
-----END PGP SIGNATURE-----
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Here is the big set of staging driver updates for 5.19-rc1.
Lots of forward progress happened this development cycle, one driver
(wfx wireless driver) got merged into the real portion of the kernel,
and another one (unisys) was removed as no one is around anymore to take
care of it and no one has the hardware. Combined with loads of tiny
driver cleanups overall we removed 13k lines of code from the tree, a
nice improvement.
Other than the wfx and unisys driver changes the major points of this
merge is:
- r8188eu driver cleanups. So many cleanups. It's amazing just
how many things have been cleaned up here, and yet, how many
remain to go. Lots of work happened here, and it doesn't look
to slow down any time soon.
- other wifi driver cleanups. Not as many as the r8188eu
driver, but still pretty impressive from a janitorial point of
view.
- bcm2853 driver cleanups
- other very minor driver cleanups
All of these have been in the linux-next tree for weeks with no reported
issues.
Note, you will have a merge conflict in the
drivers/net/wireless/silabs/wfx/sta.c file, please just take the change
that came in from the wifi tree. We thought as I had pulled the same
merge point from the wifi developers this type of conflict wouldn't have
happened, but for some reason git flags it as something to pay attention
to and couldn't resolve it itself.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnfqA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynbFQCfbr7wdJYsNfVd0nXlDUw9EQtbhR8AoM5Y31Ni
hBJs6fa/HMGfLnrmN2Xi
=BQyT
-----END PGP SIGNATURE-----
Merge tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.19-rc1.
Lots of forward progress happened this development cycle, one driver
(wfx wireless driver) got merged into the real portion of the kernel,
and another one (unisys) was removed as no one is around anymore to
take care of it and no one has the hardware. Combined with loads of
tiny driver cleanups overall we removed 13k lines of code from the
tree, a nice improvement.
Other than the wfx and unisys driver changes the major points of this
merge is:
- r8188eu driver cleanups. So many cleanups. It's amazing just how
many things have been cleaned up here, and yet, how many remain to
go. Lots of work happened here, and it doesn't look to slow down
any time soon.
- other wifi driver cleanups. Not as many as the r8188eu driver, but
still pretty impressive from a janitorial point of view.
- bcm2853 driver cleanups
- other very minor driver cleanups
All of these have been in the linux-next tree for weeks with no
reported issues"
* tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (363 commits)
staging: r8188eu: remove include/rtw_debug.h
staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
staging: r8188eu: delete rtw_wx_read/write32()
staging: r8188eu: Remove multiple assignments
staging: r8188eu: add check for kzalloc
staging: r8188eu: fix warnings in rtw_wlan_util
staging: r8188eu: fix warnings in rtw_pwrctrl
staging: r8188eu: fix warnings in rtw_p2p
staging: rtl8712: fix uninit-value in r871xu_drv_init()
staging: rtl8712: fix uninit-value in usb_read8() and friends
staging: rtl8712: add error handler in r8712_usbctrl_vendorreq()
staging: r8188eu: remove _drv_ defines from include/rtw_debug.h
staging: vc04_services: remove unused macro
staging: rtl8192u: remove null check after call container_of()
staging: rtl8192e: remove null check after call container_of()
staging: ks7010: remove null check after call container_of()
staging: r8188eu: remove HW_VAR_AC_PARAM_BE from SetHwReg8188EU()
staging: r8188eu: assoc_rsp and assoc_rsp_len are not used
staging: r8188eu: last_rx_mgnt_pkts is set but not used
staging: r8188eu: simplify error handling in recv_func_prehandle
...
Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/ufs/ directory. This separation makes it clear which header files
UFS drivers are allowed to include (include/ufs/*.h) and which header files
UFS drivers are not allowed to include (drivers/ufs/core/*.h).
Update the MAINTAINERS file. Add myself as a UFS reviewer.
Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Keoseong Park <keosung.park@samsung.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some devices can timestamp system lines/signals/Buses in real-time
using the hardware counter or other hardware means which can give
finer granularity and help avoid jitter introduced by software
timestamping. To utilize such functionality, this patchset creates
HTE subsystem where devices can register themselves as providers so
that the consumers devices can request specific line from the
providers. The patch also adds compilation support in Makefile and
menu options in Kconfig.
The provider does following:
- Registers chip with the framework.
- Provides translation hook to convert logical line id.
- Provides enable/disable, request/release callbacks.
- Pushes timestamp data to HTE subsystem.
The consumer does following:
- Initializes line attribute.
- Gets HTE timestamp descriptor.
- Requests timestamp functionality.
- Puts HTE timestamp descriptor.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.
Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.
It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.
Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.
Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The Unisys sub-tree of drivers/staging contains three drivers for the
"Unisys Secure Partition" (s-Par(R)): visorhba, visorinput, visornic.
They have no maintainers, in fact the only one that is listed in
MAINTAINERS has an unreacheable email address. During 2021 and 2022
several patches have been submitted to these drivers but nobody at
Unisys cared of reviewing the changes. Probably, also the
"sparmaintainer" internal list of unisys.com is not anymore read by
interested Unisys' engineers.
Therefore, remove the drivers/staging/unisys directory and delete the
relevant entries in the MAINTAINERS, Kconfig, Makefile files, then
remove also the drivers/visorbus directory which is not anymore needed
(it contained the driver for the virtualized bus for the Unisys s-Par
firmware).
Cc: David Kershner <david.kershner@unisys.com>
Cc: <sparmaintainer@unisys.com>
Cc: Ken Cox <jkc@redhat.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220414103217.32058-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel processors provide access for various services designed to support
processor and DRAM thermal management, platform manageability and
processor interface tuning and diagnostics.
Those services are available via the Platform Environment Control
Interface (PECI) that provides a communication channel between the
processor and the Baseboard Management Controller (BMC) or other
platform management device.
This change introduces PECI subsystem by adding the initial core module
and API for controller drivers.
Co-developed-by: Jason M Bills <jason.m.bills@linux.intel.com>
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jason M Bills <jason.m.bills@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20220208153639.255278-5-iwona.winiarska@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When neither VIRTIO_PCI_LIB nor VIRTIO are enabled, but the alibaba
vdpa driver is, the kernel runs into a link error because the legacy
virtio module never gets built:
x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_features':
eni_vdpa.c:(.text+0x23f): undefined reference to `vp_legacy_set_features'
x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_state':
eni_vdpa.c:(.text+0x2fe): undefined reference to `vp_legacy_get_queue_enable'
x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_address':
eni_vdpa.c:(.text+0x376): undefined reference to `vp_legacy_set_queue_address'
x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_set_vq_ready':
eni_vdpa.c:(.text+0x3b4): undefined reference to `vp_legacy_set_queue_address'
x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_free_irq':
eni_vdpa.c:(.text+0x460): undefined reference to `vp_legacy_queue_vector'
x86_64-linux-ld: eni_vdpa.c:(.text+0x4b7): undefined reference to `vp_legacy_config_vector'
x86_64-linux-ld: drivers/vdpa/alibaba/eni_vdpa.o: in function `eni_vdpa_reset':
When VIRTIO_PCI_LIB was added, it was correctly added to drivers/Makefile
as well, but for the legacy module, this is missing. Solve this by always
entering drivers/virtio during the build and letting its Makefile take
care of the individual options, rather than having a separate line for
each sub-option.
Fixes: 64b9f64f80 ("vdpa: introduce virtio pci driver")
Fixes: e85087beed ("eni_vdpa: add vDPA driver for Alibaba ENI")
Fixes: d89c8169bd ("virtio-pci: introduce legacy device module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211206085034.2836099-1-arnd@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmDa/58THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXufBB/sGVIp1OhrtRFXeLJGJtbPPJzbh1w+K
hlDxthpN8uW7W7jyQRShiNUVwGX1QUiKBUH5g9oVKYBm0/srup4TivT2PiXPp4mC
7rPM9jcOD0ei9W2Z1/fjQvyorz37pQzq9GMF37FGqPM2mVuCl16QhdF5EqYjipCU
k34MyvjUPudmYot3gdiURyxrUljzw3KLfVXeg1Tpk0mXLZvm6OnyRn9ywgNJb+Pz
wn2+Om3hZCtccF2CUUS1LbMPFF97xy/CdAObyDuJyyXfyY7JFZ/guWBkQpi0tejQ
/+yJFYYZSo1lXV8xxB0t8LR9Vf6OxZNexn+0El4IUO4TZuAJcr4Q6fYp
=yOAz
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
"Just a few minor enhancement patches and bug fixes"
* tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
Drivers: hv: Move Hyper-V extended capability check to arch neutral code
drivers: hv: Fix missing error code in vmbus_connect()
x86/hyperv: fix logical processor creation
hv_utils: Fix passing zero to 'PTR_ERR' warning
scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs
Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer
hv_balloon: Remove redundant assignment to region_start
The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while. Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The extended capability query code is currently under arch/x86, but it
is architecture neutral, and is used by arch neutral code in the Hyper-V
balloon driver. Hence the balloon driver fails to build on other
architectures.
Fix by moving the ext cap code out from arch/x86. Because it is also
called from built-in architecture specific code, it can't be in a module,
so the Makefile treats as built-in even when CONFIG_HYPERV is "m". Also
drivers/Makefile is tweaked because this is the first occurrence of a
Hyper-V file that is built-in even when CONFIG_HYPERV is "m".
While here, update the hypercall status check to use the new helper
function instead of open coding. No functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Link: https://lore.kernel.org/r/1622669804-2016-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
A bunch of new drivers including vdpa support for block
and virtio-vdpa. Beginning of vq kick (aka doorbell) mapping support.
Misc fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCRBBEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpiCIH/iNNTeyl4hZJ8IOTlqTagjZgUBYslpda66pU
XfGKmXWpCGHYSw0XgbfHDyTZTCmdyq/b4FrxPgYrrEsQqztLIaGHyapHPcXEAThb
+pHtcxqsQ8DGucJZpNU44M3kB13u07gauR540HyXzEqLXd5vEhG7dkClBjm67TWN
SbJoEP3eNJMUezYuGsmUAGoi/M9NyCx+RiLd7roIlTxhIDW17PFNY0sIgG/sX6/s
1MXng0l00EjawIu4OnWfjg6kZoa6se41Rpcwd7XluTZncYKnMTJGoxDwv0xoJl4I
pI5OS+Ea6ENuuygmYMEl294I5E0QeaMGFpEYyO9sm764K5bLjVw=
=x0Ot
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"A bunch of new drivers including vdpa support for block and
virtio-vdpa.
Beginning of vq kick (aka doorbell) mapping support.
Misc fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
virtio_pci_modern: correct sparse tags for notify
virtio_pci_modern: __force cast the notify mapping
vDPA/ifcvf: get_config_size should return dev specific config size
vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA
vDPA/ifcvf: deduce VIRTIO device ID when probe
vdpa_sim_blk: add support for vdpa management tool
vdpa_sim_blk: handle VIRTIO_BLK_T_GET_ID
vdpa_sim_blk: implement ramdisk behaviour
vdpa: add vdpa simulator for block device
vhost/vdpa: Remove the restriction that only supports virtio-net devices
vhost/vdpa: use get_config_size callback in vhost_vdpa_config_validate()
vdpa: add get_config_size callback in vdpa_config_ops
vdpa_sim: cleanup kiovs in vdpasim_free()
vringh: add vringh_kiov_length() helper
vringh: implement vringh_kiov_advance()
vringh: explain more about cleaning riov and wiov
vringh: reset kiov 'consumed' field in __vringh_iov()
vringh: add 'iotlb_lock' to synchronize iotlb accesses
vdpa_sim: use iova module to allocate IOVA addresses
vDPA/ifcvf: deduce VIRTIO device ID from pdev ids
...
This patch introduce a vDPA driver for virtio-pci device. It bridges
the virtio-pci control command to the vDPA bus. This will be used for
features prototyping and testing.
Note that get/restore virtqueue state is not supported which needs
extension on the virtio specification.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210223061905.422659-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The comedi code came into the kernel back in 2008, but traces its
lifetime to much much earlier. It's been polished and buffed and
there's really nothing preventing it from being part of the "real"
portion of the kernel.
So move it to drivers/comedi/ as it belongs there.
Many thanks to the hundreds of developers who did the work to make this
happen.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=jlPz
-----END PGP SIGNATURE-----
Merge tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
The CXL.mem protocol allows a device to act as a provider of "System
RAM" and/or "Persistent Memory" that is fully coherent as if the memory
was attached to the typical CPU memory controller.
With the CXL-2.0 specification a PCI endpoint can implement a "Type-3"
device interface and give the operating system control over "Host
Managed Device Memory". See section 2.3 Type 3 CXL Device.
The memory range exported by the device may optionally be described by
the platform firmware memory map, or by infrastructure like LIBNVDIMM to
provision persistent memory capacity from one, or more, CXL.mem devices.
A pre-requisite for Linux-managed memory-capacity provisioning is this
cxl_mem driver that can speak the mailbox protocol defined in section
8.2.8.4 Mailbox Registers.
For now just land the initial driver boiler-plate and Documentation/
infrastructure.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: David Rientjes <rientjes@google.com> (v1)
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://www.computeexpresslink.org/download-the-specification
Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
SFI-based platforms are gone. So does this framework.
This removes mention of SFI through the drivers and other code as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as
a result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one
Arm platform. These all do timer ticks slighly differently, and this
gets cleaned up to the point they at least all call the same helper
function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS'
in Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=QpNs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select
VHOST_IOTLB to make them be built.
However, if VHOST_IOTLB is the only VHOST symbol that is
set/enabled, the object file still won't be built because
drivers/Makefile won't descend into drivers/vhost/ to build it,
so make drivers/Makefile build the needed binary whenever
VHOST_IOTLB is set, like it does for VHOST_RING.
Fixes these build errors:
ERROR: modpost: "vhost_iotlb_itree_next" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined!
ERROR: modpost: "vhost_iotlb_itree_first" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined!
Fixes: 29064bfdab ("vdpa/mlx5: Add support library for mlx5 VDPA implementation")
Fixes: aff90770e5 ("vdpa/mlx5: Fix dependency on MLX5_CORE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201128213905.27409-1-rdunlap@infradead.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
We have both vhost and virtio drivers that depend on vdpa.
It's easier to locate it at a top level directory otherwise
we run into issues e.g. if vhost is built-in but virtio
is modular. Let's just move it up a level.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thomas Zimmermann