With gcc-4.1.2.:
net/bridge/br_fdb.c: In function ‘br_fdb_sync_static’:
net/bridge/br_fdb.c:996: warning: ‘err’ may be used uninitialized in this function
Indeed, if the list is empty, err will be uninitialized, and will be
propagated up as the function return value.
Fix this by preinitializing err to zero.
Fixes: eb7935830d ("net: bridge: use rhashtable for fdbs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 and IPv6 packets may arrive with lower-layer padding that is not
included in the L3 length. For example, a short IPv4 packet may have
up to 6 bytes of padding following the IP payload when received on an
Ethernet device with a minimum packet length of 64 bytes.
Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(),
and help() in nf_conntrack_ftp) assume skb->len reflects the length of
the L3 header and payload, rather than referring back to
ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by
lower-layer padding.
In the normal IPv4 receive path, ip_rcv() trims the packet to
ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive
path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly
in the br_netfilter receive path, br_validate_ipv4() and
br_validate_ipv6() trim the packet to the L3 length before invoking
netfilter hooks.
Currently in the OVS conntrack receive path, ovs_ct_execute() pulls
the skb to the L3 header but does not trim it to the L3 length before
calling nf_conntrack_in(NF_INET_PRE_ROUTING). When
nf_conntrack_proto_tcp encounters a packet with lower-layer padding,
nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log
message. While extra zero bytes don't affect the checksum, the length
in the IP pseudoheader does. That length is based on skb->len, and
without trimming, it doesn't match the length the sender used when
computing the checksum.
In ovs_ct_execute(), trim the skb to the L3 length before higher-layer
processing.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit fixes the pacing_gain to remain at BBR_UNIT (1.0) when
using lt_bw and returning from the PROBE_RTT state to PROBE_BW.
Previously, when using lt_bw, upon exiting PROBE_RTT and entering
PROBE_BW the bbr_reset_probe_bw_mode() code could sometimes randomly
end up with a cycle_idx of 0 and hence have bbr_advance_cycle_phase()
set a pacing gain above 1.0. In such cases this would result in a
pacing rate that is 1.25x higher than intended, potentially resulting
in a high loss rate for a little while until we stop using the lt_bw a
bit later.
This commit is a stable candidate for kernels back as far as 4.9.
Fixes: 0f8782ea14 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reported-by: Beyers Cronje <bcronje@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If you take a GSO skb, and split it into packets, will the MAC
length (L2 + L3 + L4 headers + payload) of those packets be small
enough to fit within a given length?
Move skb_gso_mac_seglen() to skbuff.h with other related functions
like skb_gso_network_seglen() so we can use it, and then create
skb_gso_validate_mac_len to do the full calculation.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
Pull HID updates from Jiri Kosina:
- remove hid_have_special_driver[] entry hard requirement for any newly
supported VID/PID by a specific non-core hid driver, and general
related cleanup of HID matching core, from Benjamin Tissoires
- support for new Wacom devices and a few small fixups for already
supported ones in Wacom driver, from Aaron Armstrong Skomra and Jason
Gerecke
- sysfs interface fix for roccat driver from Dan Carpenter
- support for new Asus HW (T100TAF, T100HA, T200TA) from Hans de Goede
- improved support for Jabra devices, from Niels Skou Olsen
- other assorted small fixes and new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
HID: asus: Fix special function keys on T200TA
HID: asus: Add touchpad max x/y and resolution info for the T200TA
HID: wacom: Add support for One by Wacom (CTL-472 / CTL-672)
HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events
HID: intel-ish-hid: Enable Cannon Lake and Coffee Lake laptop/desktop
HID: elecom: rewrite report fixup for EX-G and future mice
HID: sony: Report DS4 version info through sysfs
HID: sony: Print reversed MAC address via %pMR
HID: wacom: EKR: ensure devres groups at higher indexes are released
HID: rmi: Support the Fujitsu R726 Pad dock using hid-rmi
HID: add quirk for another PIXART OEM mouse used by HP
HID: quirks: make array hid_quirks static
HID: hid-multitouch: support fine-grain orientation reporting
HID: asus: Add product-id for the T100TAF and T100HA keyboard docks
HID: elo: clear BTN_LEFT mapping
HID: multitouch: Combine all left-button events in a frame
HID: multitouch: Only look at non touch fields in first packet of a frame
HID: multitouch: Properly deal with Win8 PTP reports with 0 touches
...
- Misc small driver fixups to
bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes
- Several major feature adds to bnxt_re driver: SRIOV VF RoCE support,
HugePages support, extended hardware stats support, and SRQ support
- A notable number of fixes to the i40iw driver from debugging scale up
testing
- More work to enable the new hip08 chip in the hns driver
- Misc small ULP fixups to srp/srpt//ipoib
- Preparation for srp initiator and target to support the RDMA-CM
protocol for connections
- Add RDMA-CM support to srp initiator, srp target is still a WIP
- Fixes for a couple of places where ipoib could spam the dmesg log
- Fix encode/decode of FDR/EDR data rates in the core
- Many patches from Parav with ongoing work to clean up inconsistencies
and bugs in RoCE support around the rdma_cm
- mlx5 driver support for the userspace features 'thread domain', 'wallclock
timestamps' and 'DV Direct Connected transport'. Support for the firmware
dual port rocee capability
- Core support for more than 32 rdma devices in the char dev allocation
- kernel doc updates from Randy Dunlap
- New netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'
- One minor change to the kobject code acked by GKH
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sMXV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull RDMA subsystem updates from Jason Gunthorpe:
"Overall this cycle did not have any major excitement, and did not
require any shared branch with netdev.
Lots of driver updates, particularly of the scale-up and performance
variety. The largest body of core work was Parav's patches fixing and
restructing some of the core code to make way for future RDMA
containerization.
Summary:
- misc small driver fixups to
bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes
- several major feature adds to bnxt_re driver: SRIOV VF RoCE
support, HugePages support, extended hardware stats support, and
SRQ support
- a notable number of fixes to the i40iw driver from debugging scale
up testing
- more work to enable the new hip08 chip in the hns driver
- misc small ULP fixups to srp/srpt//ipoib
- preparation for srp initiator and target to support the RDMA-CM
protocol for connections
- add RDMA-CM support to srp initiator, srp target is still a WIP
- fixes for a couple of places where ipoib could spam the dmesg log
- fix encode/decode of FDR/EDR data rates in the core
- many patches from Parav with ongoing work to clean up
inconsistencies and bugs in RoCE support around the rdma_cm
- mlx5 driver support for the userspace features 'thread domain',
'wallclock timestamps' and 'DV Direct Connected transport'. Support
for the firmware dual port rocee capability
- core support for more than 32 rdma devices in the char dev
allocation
- kernel doc updates from Randy Dunlap
- new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'
- one minor change to the kobject code acked by Greg KH"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits)
RDMA/nldev: Provide detailed QP information
RDMA/nldev: Provide global resource utilization
RDMA/core: Add resource tracking for create and destroy PDs
RDMA/core: Add resource tracking for create and destroy CQs
RDMA/core: Add resource tracking for create and destroy QPs
RDMA/restrack: Add general infrastructure to track RDMA resources
RDMA/core: Save kernel caller name when creating PD and CQ objects
RDMA/core: Use the MODNAME instead of the function name for pd callers
RDMA: Move enum ib_cq_creation_flags to uapi headers
IB/rxe: Change RDMA_RXE kconfig to use select
IB/qib: remove qib_keys.c
IB/mthca: remove mthca_user.h
RDMA/cm: Fix access to uninitialized variable
RDMA/cma: Use existing netif_is_bond_master function
IB/core: Avoid SGID attributes query while converting GID from OPA to IB
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
IB/umad: Fix use of unprotected device pointer
IB/iser: Combine substrings for three messages
IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
...
Pull misc vfs updates from Al Viro:
"All kinds of misc stuff, without any unifying topic, from various
people.
Neil's d_anon patch, several bugfixes, introduction of kvmalloc
analogue of kmemdup_user(), extending bitfield.h to deal with
fixed-endians, assorted cleanups all over the place..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
alpha: osf_sys.c: use timespec64 where appropriate
alpha: osf_sys.c: fix put_tv32 regression
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
dcache: delete unused d_hash_mask
dcache: subtract d_hash_shift from 32 in advance
fs/buffer.c: fold init_buffer() into init_page_buffers()
fs: fold __inode_permission() into inode_permission()
fs: add RWF_APPEND
sctp: use vmemdup_user() rather than badly open-coding memdup_user()
snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
replace_user_tlv(): switch to vmemdup_user()
new primitive: vmemdup_user()
memdup_user(): switch to GFP_USER
eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
eventfd: fold eventfd_ctx_read() into eventfd_read()
eventfd: convert to use anon_inode_getfd()
nfs4file: get rid of pointless include of btrfs.h
uvc_v4l2: clean copyin/copyout up
vme_user: don't use __copy_..._user()
usx2y: don't bother with memdup_user() for 16-byte structure
...
Syzbot reported several deadlocks in the netfilter area caused by
rtnl lock and socket lock being acquired with a different order on
different code paths, leading to backtraces like the following one:
======================================================
WARNING: possible circular locking dependency detected
4.15.0-rc9+ #212 Not tainted
------------------------------------------------------
syzkaller041579/3682 is trying to acquire lock:
(sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock
include/net/sock.h:1463 [inline]
(sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>]
do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167
but task is already holding lock:
(rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (rtnl_mutex){+.+.}:
__mutex_lock_common kernel/locking/mutex.c:756 [inline]
__mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74
register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607
tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106
xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845
check_target net/ipv6/netfilter/ip6_tables.c:538 [inline]
find_check_entry.isra.7+0x935/0xcf0
net/ipv6/netfilter/ip6_tables.c:580
translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749
do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline]
do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928
udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
SYSC_setsockopt net/socket.c:1849 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1828
entry_SYSCALL_64_fastpath+0x29/0xa0
-> #0 (sk_lock-AF_INET6){+.+.}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914
lock_sock_nested+0xc2/0x110 net/core/sock.c:2780
lock_sock include/net/sock.h:1463 [inline]
do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167
ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922
udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978
SYSC_setsockopt net/socket.c:1849 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1828
entry_SYSCALL_64_fastpath+0x29/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(sk_lock-AF_INET6);
lock(rtnl_mutex);
lock(sk_lock-AF_INET6);
*** DEADLOCK ***
1 lock held by syzkaller041579/3682:
#0: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20
net/core/rtnetlink.c:74
The problem, as Florian noted, is that nf_setsockopt() is always
called with the socket held, even if the lock itself is required only
for very tight scopes and only for some operation.
This patch addresses the issues moving the lock_sock() call only
where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt()
does not need anymore to acquire both locks.
Fixes: 22265a5c3c ("netfilter: xt_TEE: resolve oif using netdevice notifiers")
Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Async crypto accelerators (e.g. drivers/crypto/caam) support offloading
GCM operation. If they are enabled, crypto_aead_encrypt() return error
code -EINPROGRESS. In this case tls_do_encryption() needs to wait on a
completion till the time the response for crypto offload request is
received.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).
Best to remove them, IMO.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add suffix LL to constant 1000 in order to give the compiler
complete information about the proper arithmetic to use. Notice
that this constant is used in a context that expects an expression
of type long long int (64 bits, signed).
The expression (band->burst_size + band->rate) * 1000 is currently
being evaluated using 32-bit arithmetic.
Addresses-Coverity-ID: 1461563 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add suffix ULL to constant 80000 in order to avoid a potential integer
overflow and give the compiler complete information about the proper
arithmetic to use. Notice that this constant is used in a context that
expects an expression of type u64.
The current cast to u64 effectively applies to the whole expression
as an argument of type u64 to be passed to div64_u64, but it does
not prevent it from being evaluated using 32-bit arithmetic instead
of 64-bit arithmetic.
Also, once the expression is properly evaluated using 64-bit arithmentic,
there is no need for the parentheses and the external cast to u64.
Addresses-Coverity-ID: 1357588 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Backwards Compatibility:
If userspace wants to determine whether RTM_NEWLINK supports the
IFLA_IF_NETNSID property they should first send an RTM_GETLINK request
with IFLA_IF_NETNSID on lo. If either EACCESS is returned or the reply
does not include IFLA_IF_NETNSID userspace should assume that
IFLA_IF_NETNSID is not supported on this kernel.
If the reply does contain an IFLA_IF_NETNSID property userspace
can send an RTM_NEWLINK with a IFLA_IF_NETNSID property. If they receive
EOPNOTSUPP then the kernel does not support the IFLA_IF_NETNSID property
with RTM_NEWLINK. Userpace should then fallback to other means.
- Security:
Callers must have CAP_NET_ADMIN in the owning user namespace of the
target network namespace.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 136e92bbec switched local_nodes from an array to a bitmask
but did not add proper bounds checks. As the result
clusterip_config_init_nodelist() can both over-read
ipt_clusterip_tgt_info.local_nodes and over-write
clusterip_config.local_nodes.
Add bounds checks for both.
Fixes: 136e92bbec ("[NETFILTER] CLUSTERIP: use a bitmap to store node responsibility data")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Several netfilter matches and targets put kernel pointers into
info objects, but don't set usersize in descriptors.
This leads to kernel pointer leaks if a match/target is set
and then read back to userspace.
Properly set usersize for these matches/targets.
Found with manual code inspection.
Fixes: ec23189049 ("xtables: extend matches and targets with .usersize")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix wraparound bug which could lead to memory exhaustion when adding an
x.x.x.x-255.255.255.255 range to any hash:*net* types.
Fixes Netfilter's bugzilla id #1212, reported by Thomas Schwark.
Fixes: 48596a8ddc ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the NFSv4
LOOKUPP operation.
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall() due to
nfs_idmap_legacy_upcall() being called without an 'aux' parameter.
- Fix a refcount leak in the standard O_DIRECT error path.
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path.
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type.
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations when
the user is requesting only attributes that are already up to date in
the inode cache, or is specifying the AT_STATX_DONT_SYNC flag.
- Add a module alias for the SCSI pNFS layout type.
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the RDMA
transport protocol settings.
- Various other RDMA bugfixes from Chuck.
- pNFS block layout fixes.
- Always set NFS_LOCK_LOST when a lock is lost.
-----BEGIN PGP SIGNATURE-----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=5Vv2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the
NFSv4 LOOKUPP operation
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall()
due to nfs_idmap_legacy_upcall() being called without an 'aux'
parameter
- Fix a refcount leak in the standard O_DIRECT error path
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations
when the user is requesting only attributes that are already up to
date in the inode cache, or is specifying the AT_STATX_DONT_SYNC
flag
- Add a module alias for the SCSI pNFS layout type
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the
RDMA transport protocol settings
- Various other RDMA bugfixes from Chuck
- pNFS block layout fixes
- Always set NFS_LOCK_LOST when a lock is lost"
* tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Fix a race between mmap() and O_DIRECT
NFS: Remove a redundant call to unmap_mapping_range()
pnfs/blocklayout: Ensure disk address in block device map
pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors
lockd: Fix server refcounting
SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint
SUNRPC: Micro-optimize __rpc_execute
SUNRPC: task_run_action should display tk_callback
sunrpc: Format RPC events consistently for display
SUNRPC: Trace xprt_timer events
xprtrdma: Correct some documenting comments
xprtrdma: Fix "bytes registered" accounting
xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects
xprtrdma: Add trace points to instrument QP and CQ access upcalls
xprtrdma: Add trace points in the client-side backchannel code paths
xprtrdma: Add trace points for connect events
xprtrdma: Add trace points to instrument MR allocation and recovery
xprtrdma: Add trace points to instrument memory invalidation
xprtrdma: Add trace points in reply decoder path
xprtrdma: Add trace points to instrument memory registration
..
Pull kern_recvmsg reduction from Al Viro:
"kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In
all but one case that is not needed - use of ITER_KVEC for ->msg_iter
takes care of the data and does not care about set_fs(). The only
exception is svc_udp_recvfrom() where we want cmsg to be store into
kernel object; everything else can just use sock_recvmsg() and be done
with that.
A followup converting svc_udp_recvfrom() away from set_fs() (and
killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what
netdev folks think of the approach proposed in that followup)"
* 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tipc: switch to sock_recvmsg()
smc: switch to sock_recvmsg()
ipvs: switch to sock_recvmsg()
mISDN: switch to sock_recvmsg()
drbd: switch to sock_recvmsg()
lustre lnet_sock_read(): switch to sock_recvmsg()
cfs2: switch to sock_recvmsg()
ncpfs: switch to sock_recvmsg()
dlm: switch to sock_recvmsg()
svc_recvfrom(): switch to sock_recvmsg()
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJabj6pAAoJEHm+PkMAQRiGs8cIAJQFkCWnbz86e3vG4DuWhyA8
CMGHCQdUOxxFGa/ixhIiuetbC0x+JVHAjV2FwVYbAQfaZB3pfw2iR1ncQxpAP1AI
oLU9vBEqTmwKMPc9CM5rRfnLFWpGcGwUNzgPdxD5yYqGDtcM8K840mF6NdkYe5AN
xU8rv1wlcFPF4A5pvHCH0pvVmK4VxlVFk/2H67TFdxBs4PyJOnSBnf+bcGWgsKO6
hC8XIVtcKCH2GfFxt5d0Vgc5QXJEpX1zn2mtCa1MwYRjN2plgYfD84ha0xE7J0B0
oqV/wnjKXDsmrgVpncr3txd4+zKJFNkdNRE4eLAIupHo2XHTG4HvDJ5dBY2NhGU=
=sOml
-----END PGP SIGNATURE-----
Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ipmr_vif_seq_show() prints the difference between two pointers with the
format string %2zd (z for size_t), however the correct format string is
%2td instead (t for ptrdiff_t).
The same bug in ip6mr_vif_seq_show() was already fixed long ago by
commit d430a227d2 ("bogus format in ip6mr").
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
socket can be disconnected and gets transformed back to a listening
socket, if sk_frag.page is not released, which will be cloned into
a new socket by sk_clone_lock, but the reference count of this page
is increased, lead to a use after free or double free issue
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using ioctl to get address of interface, we can't
get it anymore. For example, the command is show as below.
# ifconfig eth0
In the patch ("03aef17bb79b3"), the devinet_ioctl does not
return a suitable value, even though we can find it in
the kernel. Then fix it now.
Fixes: 03aef17bb7 ("devinet_ioctl(): take copyin/copyout to caller")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported a lockdep splat in gen_new_estimator() /
est_fetch_counters() when attempting to lock est->stats_lock.
Since est_fetch_counters() is called from BH context from timer
interrupt, we need to block BH as well when calling it from process
context.
Most qdiscs use per cpu counters and are immune to the problem,
but net/sched/act_api.c and net/netfilter/xt_RATEEST.c are using
a spinlock to protect their data. They both call gen_new_estimator()
while object is created and not yet alive, so this bug could
not trigger a deadlock, only a lockdep splat.
Fixes: 1c0d32fde5 ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In current route cache aging logic, if a route has both RTF_EXPIRE and
RTF_GATEWAY set, the route will only be removed if the neighbor cache
has no NTF_ROUTER flag. Otherwise, even if the route has expired, it
won't get deleted.
Fix this logic to always check if the route has expired first and then
do the gateway neighbor cache check if previous check decide to not
remove the exception entry.
Fixes: 1859bac04f ("ipv6: remove from fib tree aged out RTF_CACHE dst")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unsolicited IPv6 neighbor advertisements should be sent after DAD
completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic
addresses and have those sent by addrconf_dad_completed after DAD.
Fixes: 4a6e3c5def ("net: ipv6: send unsolicited NA on admin up")
Reported-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pfifo_fast used to drop based on qdisc_dev(qdisc)->tx_queue_len,
so we have to resize skb array when we change tx_queue_len.
Other qdiscs which read tx_queue_len are fine because they
all save it to sch->limit or somewhere else in qdisc during init.
They don't have to implement this, it is nicer if they do so
that users don't have to re-configure qdisc after changing
tx_queue_len.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new qdisc ops ->change_tx_queue_len() so that
each qdisc could decide how to implement this if it wants.
Previously we simply read dev->tx_queue_len, after pfifo_fast
switches to skb array, we need this API to resize the skb array
when we change dev->tx_queue_len.
To avoid handling race conditions with TX BH, we need to
deactivate all TX queues before change the value and bring them
back after we are done, this also makes implementation easier.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch promotes the local change_tx_queue_len() to a core
helper function, dev_change_tx_queue_len(), so that rtnetlink
and net-sysfs could share the code. This also prepares for the
following patch.
Note, the -EFAULT in the original code doesn't make sense,
we should propagate the errno from notifiers.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should check result of kstrndup() in case of memory allocation failure.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The goal is to let the user follow an interface that moves to another
netns.
CC: Jiri Benc <jbenc@redhat.com>
CC: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The user should be able to follow any interface that moves to another
netns. There is no reason to hide physical interfaces.
CC: Jiri Benc <jbenc@redhat.com>
CC: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a sk_v6_rcv_saddr is !IPV6_ADDR_ANY and !IPV6_ADDR_MAPPED, it
implicitly implies it is an ipv6only socket. However, in inet6_bind(),
this addr_type checking and setting sk->sk_ipv6only to 1 are only done
after sk->sk_prot->get_port(sk, snum) has been completed successfully.
This inconsistency between sk_v6_rcv_saddr and sk_ipv6only confuses
the 'get_port()'.
In particular, when binding SO_REUSEPORT UDP sockets,
udp_reuseport_add_sock(sk,...) is called. udp_reuseport_add_sock()
checks "ipv6_only_sock(sk2) == ipv6_only_sock(sk)" before adding sk to
sk2->sk_reuseport_cb. In this case, ipv6_only_sock(sk2) could be
1 while ipv6_only_sock(sk) is still 0 here. The end result is,
reuseport_alloc(sk) is called instead of adding sk to the existing
sk2->sk_reuseport_cb.
It can be reproduced by binding two SO_REUSEPORT UDP sockets on an
IPv6 address (!ANY and !MAPPED). Only one of the socket will
receive packet.
The fix is to set the implicit sk_ipv6only before calling get_port().
The original sk_ipv6only has to be saved such that it can be restored
in case get_port() failed. The situation is similar to the
inet_reset_saddr(sk) after get_port() has failed.
Thanks to Calvin Owens <calvinowens@fb.com> who created an easy
reproduction which leads to a fix.
Fixes: e32ea7e747 ("soreuseport: fast reuseport UDP socket selection")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Backwards Compatibility:
If userspace wants to determine whether RTM_DELLINK supports the
IFLA_IF_NETNSID property they should first send an RTM_GETLINK request
with IFLA_IF_NETNSID on lo. If either EACCESS is returned or the reply
does not include IFLA_IF_NETNSID userspace should assume that
IFLA_IF_NETNSID is not supported on this kernel.
If the reply does contain an IFLA_IF_NETNSID property userspace
can send an RTM_DELLINK with a IFLA_IF_NETNSID property. If they receive
EOPNOTSUPP then the kernel does not support the IFLA_IF_NETNSID property
with RTM_DELLINK. Userpace should then fallback to other means.
- Security:
Callers must have CAP_NET_ADMIN in the owning user namespace of the
target network namespace.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Backwards Compatibility:
If userspace wants to determine whether RTM_SETLINK supports the
IFLA_IF_NETNSID property they should first send an RTM_GETLINK request
with IFLA_IF_NETNSID on lo. If either EACCESS is returned or the reply
does not include IFLA_IF_NETNSID userspace should assume that
IFLA_IF_NETNSID is not supported on this kernel.
If the reply does contain an IFLA_IF_NETNSID property userspace
can send an RTM_SETLINK with a IFLA_IF_NETNSID property. If they receive
EOPNOTSUPP then the kernel does not support the IFLA_IF_NETNSID property
with RTM_SETLINK. Userpace should then fallback to other means.
To retain backwards compatibility the kernel will first check whether a
IFLA_NET_NS_PID or IFLA_NET_NS_FD property has been passed. If either
one is found it will be used to identify the target network namespace.
This implies that users who do not care whether their running kernel
supports IFLA_IF_NETNSID with RTM_SETLINK can pass both
IFLA_NET_NS_{FD,PID} and IFLA_IF_NETNSID referring to the same network
namespace.
- Security:
Callers must have CAP_NET_ADMIN in the owning user namespace of the
target network namespace.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RTM_{NEW,SET}LINK already allow operations on other network namespaces
by identifying the target network namespace through IFLA_NET_NS_{FD,PID}
properties. This is done by looking for the corresponding properties in
do_setlink(). Extend do_setlink() to also look for the IFLA_IF_NETNSID
property. This introduces no functional changes since all callers of
do_setlink() currently block IFLA_IF_NETNSID by reporting an error before
they reach do_setlink().
This introduces the helpers:
static struct net *rtnl_link_get_net_by_nlattr(struct net *src_net, struct
nlattr *tb[])
static struct net *rtnl_link_get_net_capable(const struct sk_buff *skb,
struct net *src_net,
struct nlattr *tb[], int cap)
to simplify permission checks and target network namespace retrieval for
RTM_* requests that already support IFLA_NET_NS_{FD,PID} but get extended
to IFLA_IF_NETNSID. To perserve backwards compatibility the helpers look
for IFLA_NET_NS_{FD,PID} properties first before checking for
IFLA_IF_NETNSID.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-26
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) A number of extensions to tcp-bpf, from Lawrence.
- direct R or R/W access to many tcp_sock fields via bpf_sock_ops
- passing up to 3 arguments to bpf_sock_ops functions
- tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
- optionally calling bpf_sock_ops program when RTO fires
- optionally calling bpf_sock_ops program when packet is retransmitted
- optionally calling bpf_sock_ops program when TCP state changes
- access to tclass and sk_txhash
- new selftest
2) div/mod exception handling, from Daniel.
One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.
There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.
After considering _four_ different ways to address the problem,
we adapt the same behavior as on some major archs like ARMv8:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides.
Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary.
3) sockmap sample refactoring, from John.
4) lpm map get_next_key fixes, from Yonghong.
5) test cleanups, from Alexei and Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.
There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.
While trying to work out an exception handling scheme, I also
noticed that programs crafted like the following will currently
pass the verifier:
0: (bf) r6 = r1
1: (85) call pc+8
caller:
R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
callee:
frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_1
10: (b4) (u32) r2 = (u32) 0
11: (b4) (u32) r3 = (u32) 1
12: (3c) (u32) r3 /= (u32) r2
13: (61) r0 = *(u32 *)(r1 +76)
14: (95) exit
returning from callee:
frame1: R0_w=pkt(id=0,off=0,r=0,imm=0)
R1=ctx(id=0,off=0,imm=0) R2_w=inv0
R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
R10=fp0,call_1
to caller at 2:
R0_w=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0)
R10=fp0,call_-1
from 14 to 2: R0=pkt(id=0,off=0,r=0,imm=0)
R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1
2: (bf) r1 = r6
3: (61) r1 = *(u32 *)(r1 +80)
4: (bf) r2 = r0
5: (07) r2 += 8
6: (2d) if r2 > r1 goto pc+1
R0=pkt(id=0,off=0,r=8,imm=0) R1=pkt_end(id=0,off=0,imm=0)
R2=pkt(id=0,off=8,r=8,imm=0) R6=ctx(id=0,off=0,imm=0)
R10=fp0,call_-1
7: (71) r0 = *(u8 *)(r0 +0)
8: (b7) r0 = 1
9: (95) exit
from 6 to 8: safe
processed 16 insns (limit 131072), stack depth 0+0
Basically what happens is that in the subprog we make use of a
div/mod by 0 exception and in the 'normal' subprog's exit path
we just return skb->data back to the main prog. This has the
implication that the verifier thinks we always get a pkt pointer
in R0 while we still have the implicit 'return 0' from the div
as an alternative unconditional return path earlier. Thus, R0
then contains 0, meaning back in the parent prog we get the
address range of [0x0, skb->data_end] as read and writeable.
Similar can be crafted with other pointer register types.
Since i) BPF_ABS/IND is not allowed in programs that contain
BPF to BPF calls (and generally it's also disadvised to use in
native eBPF context), ii) unknown opcodes don't return zero
anymore, iii) we don't return an exception code in dead branches,
the only last missing case affected and to fix is the div/mod
handling.
What we would really need is some infrastructure to propagate
exceptions all the way to the original prog unwinding the
current stack and returning that code to the caller of the
BPF program. In user space such exception handling for similar
runtimes is typically implemented with setjmp(3) and longjmp(3)
as one possibility which is not available in the kernel,
though (kgdb used to implement it in kernel long time ago). I
implemented a PoC exception handling mechanism into the BPF
interpreter with porting setjmp()/longjmp() into x86_64 and
adding a new internal BPF_ABRT opcode that can use a program
specific exception code for all exception cases we have (e.g.
div/mod by 0, unknown opcodes, etc). While this seems to work
in the constrained BPF environment (meaning, here, we don't
need to deal with state e.g. from memory allocations that we
would need to undo before going into exception state), it still
has various drawbacks: i) we would need to implement the
setjmp()/longjmp() for every arch supported in the kernel and
for x86_64, arm64, sparc64 JITs currently supporting calls,
ii) it has unconditional additional cost on main program
entry to store CPU register state in initial setjmp() call,
and we would need some way to pass the jmp_buf down into
___bpf_prog_run() for main prog and all subprogs, but also
storing on stack is not really nice (other option would be
per-cpu storage for this, but it also has the drawback that
we need to disable preemption for every BPF program types).
All in all this approach would add a lot of complexity.
Another poor-man's solution would be to have some sort of
additional shared register or scratch buffer to hold state
for exceptions, and test that after every call return to
chain returns and pass R0 all the way down to BPF prog caller.
This is also problematic in various ways: i) an additional
register doesn't map well into JITs, and some other scratch
space could only be on per-cpu storage, which, again has the
side-effect that this only works when we disable preemption,
or somewhere in the input context which is not available
everywhere either, and ii) this adds significant runtime
overhead by putting conditionals after each and every call,
as well as implementation complexity.
Yet another option is to teach verifier that div/mod can
return an integer, which however is also complex to implement
as verifier would need to walk such fake 'mov r0,<code>; exit;'
sequeuence and there would still be no guarantee for having
propagation of this further down to the BPF caller as proper
exception code. For parent prog, it is also is not distinguishable
from a normal return of a constant scalar value.
The approach taken here is a completely different one with
little complexity and no additional overhead involved in
that we make use of the fact that a div/mod by 0 is undefined
behavior. Instead of bailing out, we adapt the same behavior
as on some major archs like ARMv8 [0] into eBPF as well:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides. I verified this
also with a test program compiled by gcc and clang, and the
behavior matches with the spec. Going forward we adapt the
eBPF verifier to emit such rewrites once div/mod by register
was seen. cBPF is not touched and will keep existing 'return 0'
semantics. Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary and
this way we would also have the option of more flexibility
from LLVM code generation side (which is then fully visible
to verifier). Thus, this patch i) fixes the panic seen in
above program and ii) doesn't bypass the verifier observations.
[0] ARM Architecture Reference Manual, ARMv8 [ARM DDI 0487B.b]
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487b.b/DDI0487B_b_armv8_arm.pdf
1) aarch64 instruction set: section C3.4.7 and C6.2.279 (UDIV)
"A division by zero results in a zero being written to
the destination register, without any indication that
the division by zero occurred."
2) aarch32 instruction set: section F1.4.8 and F5.1.263 (UDIV)
"For the SDIV and UDIV instructions, division by zero
always returns a zero result."
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Very minor optimization; saves 1 byte per program in x86_64
JIT in cBPF prologue.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
select(2) with wfds but no rfds must return when the socket is shut down
by the peer. This way userspace notices socket activity and gets -EPIPE
from the next write(2).
Currently select(2) does not return for virtio-vsock when a SEND+RCV
shutdown packet is received. This is because vsock_poll() only sets
POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the
socket is in when the shutdown is received.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ccid2_hc_tx_rto_expire() timer callback always restarts the timer
again and can run indefinitely (unless it is stopped outside), and after
commit 120e9dabaf ("dccp: defer ccid_hc_tx_delete() at dismantle time"),
which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from
dccp_destroy_sock() to sk_destruct(), this started to happen quite often.
The timer prevents releasing the socket, as a result, sk_destruct() won't
be called.
Found with LTP/dccp_ipsec tests running on the bonding device,
which later couldn't be unloaded after the tests were completed:
unregister_netdevice: waiting for bond0 to become free. Usage count = 148
Fixes: 2a91aa3967 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE4bay/IylYqM/npjQHv7KIOw4HPYFAlpq+ZkTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAe/sog7Dgc9mFcB/wPSu30a664/+wjUvXM7Zdw4ko/PRdS
deSRnjGj3epkHRyGJkdGSuPx9iGg3pqR8poMCZZmFUG+kGBmEcGQX+eyaR41zIUz
iyEgZSufYDjsW47eGBsNE01xQjoL1jcF9JM7NHmRrw4+2YF75cGE3BOGcmcV6Hjc
O5HDIpLmbeMHI4NcujgD4UG/VPnZQw3+oN9eyYUEbY5Aa2XQyW76DIJ3SyKsHQz0
K/s0uxAGo+Ap7xuoBUJpx6BBYoHYM171DTgXfH9pUB0MwqyDCq3hAyYGR+UEdIXb
IDhIcN/l5wFU8VICjYmSKgKyjjHqlixgoki2snmJxVWu0KeVl5LJ1Edv
=7jiC
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.16-20180126' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2018-01-26
this is a pull request for net-next/master consisting of 3 patches.
The first two patches target the CAN documentation. The first is by me
and fixes pointer to location of fsl,mpc5200-mscan node in the mpc5200
documentation. The second patch is by Robert Schwebel and it converts
the plain ASCII documentation to restructured text.
The third patch is by Fabrizio Castro add the r8a774[35] support to the
rcar_can dt-bindings documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return statements in functions returning bool should use
true/false instead of 1/0.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Closing a listen socket may hit the warning
WARN_ON(sock_owned_by_user(sk)) of tcp_close(), if the wake up of
the smc_tcp_listen_worker has not yet finished.
This patch introduces smc_close_wait_listen_clcsock() making sure
the listening internal clcsock has been closed in smc_tcp_listen_work(),
before the listening external SMC socket finishes closing.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Proper socket refcounting makes the sock_put worker obsolete.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Increase the socket refcount during poll wait.
Take the socket lock before checking socket state.
For a listening socket return a mask independent of state SMC_ACTIVE and
cover errors or closed state as well.
Get rid of the accept_q loop in smc_accept_poll().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RoCE device changes cause an IB event, processed in the global event
handler for the ROCE device. Problems for a certain Queue Pair cause a QP
event, processed in the QP event handler for this QP.
Among those events are port errors and other fatal device errors. All
link groups using such a port or device must be terminated in those cases.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-01-26
One last patch for this development cycle:
1) Add ESN support for IPSec HW offload.
From Yossef Efraim.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to IPv4 allow routes to be added with the RTNH_F_ONLINK flag.
The onlink option requires a gateway and a nexthop device. Any unicast
gateway is allowed (including IPv4 mapped addresses and unresolved
ones) as long as the gateway is not a local address and if it resolves
it must match the given device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
onlink verification needs to do a lookup in potentially different
table than the table in fib6_config and without the RT6_LOOKUP_F_IFACE
flag. Change ip6_nh_lookup_table to take table id and flags as input
arguments. Both verifications want to ignore link state, so add that
flag can stay in the lookup helper.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move existing code to validate nexthop into a helper. Follow on patch
adds support for nexthops marked with onlink, and this helper keeps
the complexity of ip6_route_info_create in check.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel documentation is now restructured text. Convert the SocketCAN
documentation and include it in the toplevel kernel documentation.
This patch doesn't do any content change.
All references to can.txt in the code are converted to can.rst.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Message sends to the local broadcast address (255.255.255.255) require
uc_index or sk_bound_dev_if to be set to an egress device. However,
responses or only received if the socket is bound to the device. This
is overly constraining for processes running in an L3 domain. This
patch allows a socket bound to the VRF device to send to the local
broadcast address by using IP_UNICAST_IF to set the egress interface
with packet receipt handled by the VRF binding.
Similar to IP_MULTICAST_IF, relax the constraint on setting
IP_UNICAST_IF if a socket is bound to an L3 master device. In this
case allow uc_index to be set to an enslaved if sk_bound_dev_if is
an L3 master device and is the master device for the ifindex.
In udp and raw sendmsg, allow uc_index to override the oif if
uc_index master device is oif (ie., the oif is an L3 master and the
index is an L3 slave).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds support for openvswitch to configure erspan
v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added
to uapi as a binary blob to support all ERSPAN v1 and v2's
fields. Note that Previous commit "openvswitch: Add erspan tunnel
support." was reverted since it does not design properly.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally the erspan fields are defined as a group into a __be16 field,
and use mask and offset to access each field. This is more costly due to
calling ntohs/htons. The patch changes it to use bitfields.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds support for calling sock_ops BPF program when there is a TCP state
change. Two arguments are used; one for the old state and another for
the new state.
There is a new enum in include/uapi/linux/bpf.h that exports the TCP
states that prepends BPF_ to the current TCP state names. If it is ever
necessary to change the internal TCP state values (other than adding
more to the end), then it will become necessary to convert from the
internal TCP state value to the BPF value before calling the BPF
sock_ops function. There are a set of compile checks added in tcp.c
to detect if the internal and BPF values differ so we can make the
necessary fixes.
New op: BPF_SOCK_OPS_STATE_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds support for calling sock_ops BPF program when there is a
retransmission. Three arguments are used; one for the sequence number,
another for the number of segments retransmitted, and the last one for
the return value of tcp_transmit_skb (0 => success).
Does not include syn-ack retransmissions.
New op: BPF_SOCK_OPS_RETRANS_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds direct write access to sk_txhash and access to tclass for ipv6
flows through getsockopt and setsockopt. Sample usage for tclass:
bpf_getsockopt(skops, SOL_IPV6, IPV6_TCLASS, &v, sizeof(v))
where skops is a pointer to the ctx (struct bpf_sock_ops).
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds an optional call to sock_ops BPF program based on whether the
BPF_SOCK_OPS_RTO_CB_FLAG is set in bpf_sock_ops_flags.
The BPF program is passed 2 arguments: icsk_retransmits and whether the
RTO has expired.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds field bpf_sock_ops_cb_flags to tcp_sock and bpf_sock_ops. Its primary
use is to determine if there should be calls to sock_ops bpf program at
various points in the TCP code. The field is initialized to zero,
disabling the calls. A sock_ops BPF program can set it, per connection and
as necessary, when the connection is established.
It also adds support for reading and writting the field within a
sock_ops BPF program. Reading is done by accessing the field directly.
However, writing is done through the helper function
bpf_sock_ops_cb_flags_set, in order to return an error if a BPF program
is trying to set a callback that is not supported in the current kernel
(i.e. running an older kernel). The helper function returns 0 if it was
able to set all of the bits set in the argument, a positive number
containing the bits that could not be set, or -EINVAL if the socket is
not a full TCP socket.
Examples of where one could call the bpf program:
1) When RTO fires
2) When a packet is retransmitted
3) When the connection terminates
4) When a packet is sent
5) When a packet is received
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds support for passing up to 4 arguments to sock_ops bpf functions. It
reusues the reply union, so the bpf_sock_ops structures are not
increased in size.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a macro, SOCK_OPS_SET_FIELD, for writing to
struct tcp_sock or struct sock fields. This required adding a new
field "temp" to struct bpf_sock_ops_kern for temporary storage that
is used by sock_ops_convert_ctx_access. It is used to store and recover
the contents of a register, so the register can be used to store the
address of the sk. Since we cannot overwrite the dst_reg because it
contains the pointer to ctx, nor the src_reg since it contains the value
we want to store, we need an extra register to contain the address
of the sk.
Also adds the macro SOCK_OPS_GET_OR_SET_FIELD that calls one of the
GET or SET macros depending on the value of the TYPE field.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changed SOCK_OPS_GET_TCP to SOCK_OPS_GET_FIELD and added 2
arguments so now it can also work with struct sock fields.
The first argument is the name of the field in the bpf_sock_ops
struct, the 2nd argument is the name of the field in the OBJ struct.
Previous: SOCK_OPS_GET_TCP(FIELD_NAME)
New: SOCK_OPS_GET_FIELD(BPF_FIELD, OBJ_FIELD, OBJ)
Where OBJ is either "struct tcp_sock" or "struct sock" (without
quotation). BPF_FIELD is the name of the field in the bpf_sock_ops
struct and OBJ_FIELD is the name of the field in the OBJ struct.
Although the field names are currently the same, the kernel struct names
could change in the future and this change makes it easier to support
that.
Note that adding access to tcp_sock fields in sock_ops programs does
not preclude the tcp_sock fields from being removed as long as we are
willing to do one of the following:
1) Return a fixed value (e.x. 0 or 0xffffffff), or
2) Make the verifier fail if that field is accessed (i.e. program
fails to load) so the user will know that field is no longer
supported.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make SOCK_OPS_GET_TCP helper macro size independent (before only worked
with 4-byte fields.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, a sock_ops BPF program can write the op field and all the
reply fields (reply and replylong). This is a bug. The op field should
not have been writeable and there is currently no way to use replylong
field for indices >= 1. This patch enforces that only the reply field
(which equals replylong[0]) is writeable.
Fixes: 40304b2a15 ("bpf: BPF support for sock_ops")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at (null)"
Let's add a helper to check if update_pmtu is available before calling it.
Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 allows routes to be installed when the device is not up (admin up).
Worse, it does not mark it as LINKDOWN. IPv4 does not allow it and really
there is no reason for IPv6 to allow it, so check the flags and deny if
device is admin down.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a problem for at least one connection of a link group is detected,
the whole link group and all its connections are terminated.
This patch adds a check for healthy link group when trying to reserve
a work request, and checks for healthy connections before starting
a tx worker.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a new connection with a new rmb is added to a link group, its
memory region is registered. If a link group is terminated, a pending
registration requires a wake up.
And consolidate setting of tx_flag peer_conn_abort in smc_lgr_terminate().
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once a linkgroup is created successfully, it stays alive for a
certain time to service more connections potentially created.
If one of the initialization steps for a new linkgroup fails,
the linkgroup should not be reused by other connections following.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ib_post_send() fails, terminate all connections of this
link group.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A state transition from closing state SMC_PEERFINCLOSEWAIT to closing
state SMC_APPFINCLOSEWAIT is not allowed. Once a closing indication
from the peer has been received, the socket reaches state SMC_CLOSED.
And receiving a peer_conn_abort just changes the state of the socket
into one of the states SMC_PROCESSABORT or SMC_CLOSED;
sending a peer_conn_abort occurs in smc_close_active() for state
SMC_PROCESSABORT only.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an SMC socket is aborted, the tx worker should be cancelled.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we unhash a dying net from netns_ids lists
under rtnl_lock(). It's a leftover from the time when
net::netns_ids was introduced. There was no net::nsid_lock,
and rtnl_lock() was mostly need to order modification
of alive nets nsid idr, i.e. for:
for_each_net(tmp) {
...
id = __peernet2id(tmp, net);
idr_remove(&tmp->netns_ids, id);
...
}
Since we have net::nsid_lock, the modifications are
protected by this local lock, and now we may introduce
better scheme of netns_ids destruction.
Let's look at the functions peernet2id_alloc() and
get_net_ns_by_id(). Previous commits taught these
functions to work well with dying net acquired from
rtnl unlocked lists. And they are the only functions
which can hash a net to netns_ids or obtain from there.
And as easy to check, other netns_ids operating functions
works with id, not with net pointers. So, we do not
need rtnl_lock to synchronize cleanup_net() with all them.
The another property, which is used in the patch,
is that net is unhashed from net_namespace_list
in the only place and by the only process. So,
we avoid excess rcu_read_lock() or rtnl_lock(),
when we'are iterating over the list in unhash_nsid().
All the above makes possible to keep rtnl_lock() locked
only for net->list deletion, and completely avoid it
for netns_ids unhashing and destruction. As these two
doings may take long time (e.g., memory allocation
to send skb), the patch should positively act on
the scalability and signify decrease the time, which
rtnl_lock() is held in cleanup_net().
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.
For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open. However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open. In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence. The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:
unregister_netdevice: waiting for lo to become free. Usage count = 1
These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.
After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like syzbot found its way into netfilter territory.
Issue here is that @name comes from user space and might
not be null terminated.
Out-of-bound reads happen, KASAN is not happy.
v2 added similar fix for xt_request_find_target(),
as Florian advised.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Same story as with dev_ifsioc(), except that the last cases with non-trivial
conversions had been taken out in 2013...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Once upon a time net/socket.c:dev_ifsioc() used to handle SIOCSHWTSTAMP and
SIOCSIFMAP. These have different native and compat layout, so the format
conversion had been needed. In 2009 these two cases had been taken out,
turning the rest into a convoluted way to calling sock_do_ioctl(). We copy
compat structure into native one, call sock_do_ioctl() on that and copy
the result back for the in/out ioctls. No layout transformation anywhere,
so we might as well just call sock_do_ioctl() and skip all the headache with
copying.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Only two of dev_ioctl() callers may pass SIOCGIFCONF to it.
Separating that codepath from the rest of dev_ioctl() allows both
to simplify dev_ioctl() itself (all other cases work with struct ifreq *)
*and* seriously simplify the compat side of that beast: all it takes
is passing to inet_gifconf() an extra argument - the size of individual
records (sizeof(struct ifreq) or sizeof(struct compat_ifreq)). With
dev_ifconf() called directly from sock_do_ioctl()/compat_dev_ifconf()
that's easy to arrange.
As the result, compat side of SIOCGIFCONF doesn't need any
allocations, copy_in_user() back and forth, etc.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This allows marks set by connmark in iptables
to be used for route lookups.
Signed-off-by: Thomas Winter <thomas.winter@alliedtelesis.co.nz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate extack on removal of offloaded filter. Don't pass
extack from error paths.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass offload flags to the new implementation of
tc_cls_common_offload_init(). Extack will now only
be set if user requested skip_sw. hnodes need to
hold onto the flags now to be able to reuse them
on filter removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate extack on removal of offloaded filter. Don't pass
extack from error paths.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass offload flags to the new implementation of
tc_cls_common_offload_init(). Extack will now only
be set if user requested skip_sw.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate extack on removal of offloaded filter. Don't pass
extack from error paths.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass offload flags to the new implementation of
tc_cls_common_offload_init(). Extack will now only
be set if user requested skip_sw.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate extack on removal of offloaded filter.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass offload flags to the new implementation of
tc_cls_common_offload_init(). Extack will now only
be set if user requested skip_sw.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
cls_bpf now guarantees that only device-bound programs are
allowed with skip_sw. The drivers no longer pay attention to
flags on filter load, therefore the bpf_offload member can be
removed. If flags are needed again they should probably be
added to struct tc_cls_common_offload instead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the tc_cls_common_offload_init() helper function to
tc_cls_common_offload_init_deprecated() and add a new implementation
which also takes flags argument. We will only set extack if flags
indicate that offload is forced (skip_sw) otherwise driver errors
should be ignored, as they don't influence the overall filter
installation.
Note that we need the tc_skip_hw() helper for new version, therefore
it is added later in the file.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate extack to cls->destroy callbacks when called from
non-error paths. On error paths pass NULL to avoid overwriting
the failure message.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed to prevent sk_user_data being overwritten.
The check is done under the callback lock. This should prevent
a socket from being attached twice to a KCM mux. It also prevents
a socket from being attached for other use cases of sk_user_data
as long as the other cases set sk_user_data under the lock.
Followup work is needed to unify all the use cases of sk_user_data
to use the same locking.
Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP sockets for IPv4 and IPv6 that are not listeners or in closed
stated are allowed to be attached to a KCM mux.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com
Signed-off-by: Tom Herbert <tom@quantonium.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add macro generated pkt_flag_names array, with a little help of which
the flags can be printed by using an index.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PKT_FALGS macro will be used to add package behavior names definitions
to simplify the code that prints/reads pkg flags.
Sorted the array in order of printing the flags in pktgen_if_show()
Note: Renamed IPSEC_ON => IPSEC for simplicity.
No visible behavior change expected.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
o FLOW_SEQ now can be disabled with pgset "flag !FLOW_SEQ"
o FLOW_SEQ and FLOW_RND are antonyms, as it's shown by pktgen_if_show()
o IPSEC now may be disabled
Note, that IPV6 is enabled with dst6/src6 parameters, not with
a flag parameter.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'ptr' is shifted by the offset and then validated,
the memcmp should not add it a second time.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the peer sends a shutdown WRITE, this should not affect sending
in general, and waiting for send buffer space in particular.
Stop waiting of the local socket for send buffer space only, if peer
signals closing, but not if peer signals just shutdown WRITE.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a socket is closed or shutdown, smc waits for data being transmitted
in certain states. If the state changes during this wait, the close
switch depending on state should be reentered.
In addition, state change is avoided if sending of close or shutdown fails.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Work requests are needed for every ib_post_send(), among them the
ib_post_send() to signal closing. If an smc socket program is cancelled,
the smc connections should be cleaned up, and require sending of closing
signals to the peer. This may fail, if a wait for
a free work request is needed, but is cancelled immediately due to the
cancel interrupt. To guarantee notification of the peer, the wait for
a work request is changed to uninterruptible.
And the area to receive work request completion info with
ib_poll_cq() is cleared first.
And _tx_ variable names are used in the _tx_routines for the
demultiplexing common type in the header.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to wait for confirmation of pending tx requests
for a closing connection, since pending tx slots are dismissed
when finishing a connection.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup to avoid duplicate code in smc_clcsock_accept().
No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup to consistently exploit the local struct sock definitions.
No functional change.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2018-01-24
1) Only offloads SAs after they are fully initialized.
Otherwise a NIC may receive packets on a SA we can
not yet handle in the stack.
From Yossi Kuperman.
2) Fix negative refcount in case of a failing offload.
From Aviad Yehezkel.
3) Fix inner IP ptoro version when decapsulating
from interaddress family tunnels.
From Yossi Kuperman.
4) Use true or false for boolean variables instead of an
integer value in xfrm_get_type_offload.
From Gustavo A. R. Silva.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 513674b5a2 ("net: reevalulate autoflowlabel setting after
sysctl setting") removed the initialisation of
ipv6_pinfo::autoflowlabel and added a second flag to indicate
whether this field or the net namespace default should be used.
The getsockopt() handling for this case was not updated, so it
currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is
not explicitly enabled. Fix it to return the effective value, whether
that has been set at the socket or net namespace level.
Fixes: 513674b5a2 ("net: reevalulate autoflowlabel setting after sysctl ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
use RCU instead of spin_{,unlock}_bh() to protect concurrent read/write on
act_csum configuration, to reduce the effects of contention in the data
path when multiple readers are present.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
use per-CPU counters, like other TC actions do, instead of maintaining one
set of stats across all cores. This allows updating act_csum stats without
the need of protecting them using spin_{,un}lock_bh() invocations.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It takes 1sec for bond link down notification to hit user-space
when all slaves of the bond go down. 1sec is too long for
protocol daemons in user-space relying on bond notification
to recover (eg: multichassis lag implementations in user-space).
Since the link event code already marks team device port link events
as urgent, this patch moves the code to cover all lag ports and master.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for enabling the internal PHY for a 'cpu' port.
It has been tested on GE B850v3, B650v3 and B450v3, which have a
built-in MV88E6240 switch hardwired to a PCIe based network card.
On these machines the internal PHY of the i210 network card and
the Marvell switch are connected to each other and must be enabled
for properly using the switch. While the i210 PHY will be enabled
when the network interface is enabled, the switch's port is not
exposed as network interface. Additionally the mv88e6xxx driver
resets the chip during probe, so the PHY is disabled without this
patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
-----BEGIN PGP SIGNATURE-----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=67UR
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.16-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client updates for Linux 4.16
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 97a6ec4ac0 ("rhashtable: Change rhashtable_walk_start to
return void") only initialized ret for the first time, when going
to again path, the next tsp could be NULL. Without resetting ret,
cb_done would be called with tsp as NULL.
A kernel crash was caused by this when running sctpdiag testcase
in sctp-tests.
Note that this issue doesn't affect net.git yet.
Fixes: 97a6ec4ac0 ("rhashtable: Change rhashtable_walk_start to return void")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following warnings:
./net/core/dev.c:6438: warning: No description found for parameter 'extack'
./net/core/dev.c:6461: warning: No description found for parameter 'extack'
Fixes: 42ab19ee90 ("net: Add extack to upper device linking")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the @dev comment, since we do not have a net_device argument, fixes the
following kernel doc warning: /net/core/dev.c:1707: warning: Excess function
parameter 'dev' description in 'call_netdevice_notifiers_info'
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The common case: There are 13 to 14 actions per RPC, and tk_callback
is non-NULL in only one of them. There's no need to store a NULL in
the tk_callback field during each FSM step.
This slightly improves throughput results in dbench and other multi-
threaded benchmarks on my two-socket client on 56Gb InfiniBand, but
will probably be inconsequential on slower systems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This shows up in every RPC:
kworker/4:1-19772 [004] 3467.373443: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status
kworker/4:1-19772 [004] 3467.373444: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status
What's actually going on is that the first iteration of the RPC
scheduler is invoking the function in tk_callback (in this case,
xprt_timer), then invoking call_status on the next iteration.
Feeding do_action, rather than tk_action, to the "task_run_action"
trace point will now always display the correct FSM step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix kernel-doc warnings in net/sunrpc/xprtrdma/ .
net/sunrpc/xprtrdma/verbs.c:1575: warning: No description found for parameter 'count'
net/sunrpc/xprtrdma/verbs.c:1575: warning: Excess function parameter 'min_reqs' description in 'rpcrdma_ep_post_extra_recv'
net/sunrpc/xprtrdma/backchannel.c:288: warning: No description found for parameter 'r_xprt'
net/sunrpc/xprtrdma/backchannel.c:288: warning: Excess function parameter 'xprt' description in 'rpcrdma_bc_receive_call'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The contents of seg->mr_len changed when ->ro_map stopped returning
the full chunk length in the first segment. Count the full length of
each Write chunk, not the length of the first segment (which now can
only be as large as a page).
Fixes: 9d6b040978 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Fixes: ffdb5211da ("xfrm: Auto-load xfrm offload modules")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
IPSec tunnel mode supports encapsulation of IPv4 over IPv6 and vice-versa.
The outer IP header is stripped and the inner IP inherits the original
Ethernet header. Tcpdump fails to properly decode the inner packet in
case that h_proto is different than the inner IP version.
Fix h_proto to reflect the inner IP version.
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add extack support for hardware offload of classifiers. In order
to achieve this, a pointer to a struct netlink_ext_ack is added to the
struct tc_cls_common_offload that is passed to the callback for setting
up the classifier. Function tc_cls_common_offload_init() is updated to
support initialization of this new attribute.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the extack pointer obtained in the `->change()` filter operation to
cls_bpf_offload() and then to cls_bpf_offload_cmd(). This makes it
possible to use this extack pointer in drivers offloading BPF programs
in a future patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate the extack pointer from the `->change()` classifier operation
to the function used for filter replacement in cls_u32. This makes it
possible to use netlink extack messages in the future at replacement
time for this filter, although it is not used at this point.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate the extack pointer from the `->change()` classifier operation
to the function used for filter replacement in cls_matchall. This makes
it possible to use netlink extack messages in the future at replacement
time for this filter, although it is not used at this point.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate the extack pointer from the `->change()` classifier operation
to the function used for filter replacement in cls_flower. This makes it
possible to use netlink extack messages in the future at replacement
time for this filter, although it is not used at this point.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scatterlist is reused by both sendmsg and sendfile.
If a sendmsg of smaller number of pages is followed by a sendfile
of larger number of pages, the scatterlist may be too short, resulting
in a crash in gcm_encrypt.
Add sg_unmark_end to make the list the correct length.
tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates
memory in alloc_sg, or in zerocopy_from_iter.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit "net: igmp: Use correct source address on IGMPv3 reports"
introduced a check to validate the source address of locally generated
IGMPv3 packets.
Instead of checking the local interface address directly, it uses
inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the
local subnet (or equal to the point-to-point address if used).
This breaks for point-to-point interfaces, so check against
ifa->ifa_local directly.
Cc: Kevin Cernekee <cernekee@chromium.org>
Fixes: a46182b002 ("net: igmp: Use correct source address on IGMPv3 reports")
Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return statements in functions returning bool should use
true/false instead of 1/0.
This issue was detected with the help of Coccinelle.
Fixes: 85b3526932 ("bridge: Fix build error when IGMP_SNOOPING is not enabled")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate gso_type during segmentation as SKB_GSO_DODGY sources
may pass packets where the gso_type does not match the contents.
Syzkaller was able to enter the SCTP gso handler with a packet of
gso_type SKB_GSO_TCPV4.
On entry of transport layer gso handlers, verify that the gso_type
matches the transport protocol.
Fixes: 90017accff ("sctp: Add GSO support")
Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com>
Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without proper validation of DODGY packets, we might very well
feed qdisc_pkt_len_init() with invalid GSO packets.
tcp_hdrlen() might access out-of-bound data, so let's use
skb_header_pointer() and proper checks.
Whole story is described in commit d0c081b491 ("flow_dissector:
properly cap thoff field")
We have the goal of validating DODGY packets earlier in the stack,
so we might very well revert this fix in the future.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rds-tcp uses m_ack_seq to track the tcp ack# that indicates
that the peer has received a rds_message. The m_ack_seq is
used in rds_tcp_is_acked() to figure out when it is safe to
drop the rds_message from the RDS retransmit queue.
The m_ack_seq must be calculated as an offset from the right
edge of the in-flight tcp buffer, i.e., it should be based on
the ->write_seq, not the ->snd_nxt.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose the number of times the link has been going UP or DOWN, and
update the "carrier_changes" counter to be the sum of these two events.
While at it, also update the sysfs-class-net documentation to cover:
carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count
(4.16)
Signed-off-by: David Decotigny <decot@googlers.com>
[Florian:
* rebase
* add documentation
* merge carrier_changes with up/down counters]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* possible memory leak fix in hwsim
* speed up hwsim
* add hwsim userspace rate control API
* code cleanups
-----BEGIN PGP SIGNATURE-----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=HBMm
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2018-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Less than a handful of changes:
* possible memory leak fix in hwsim
* speed up hwsim
* add hwsim userspace rate control API
* code cleanups
====================
A conflict was resolved in mac80211_hwsim.c, mostly of
the simple overlapping changes category. One adding
a rhashtable and another adding a workqueue.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if the call to devlink_resource_find returns null then
the error exit path does not free the devlink_resource 'resource'
and a memory leak occurs. Fix this by kfree'ing resource on the
error exit path.
Detected by CoverityScan, CID#1464184 ("Resource leak")
Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree. Basically, a new extension for ip6tables, simplification work of
nf_tables that saves us 500 LoC, allow raw table registration before
defragmentation, conversion of the SNMP helper to use the ASN.1 code
generator, unique 64-bit handle for all nf_tables objects and fixes to
address fallout from previous nf-next batch. More specifically, they
are:
1) Seven patches to remove family abstraction layer (struct nft_af_info)
in nf_tables, this simplifies our codebase and it saves us 64 bytes per
net namespace.
2) Add IPv6 segment routing header matching for ip6tables, from Ahmed
Abdelsalam.
3) Allow to register iptable_raw table before defragmentation, some
people do not want to waste cycles on defragmenting traffic that is
going to be dropped, hence add a new module parameter to enable this
behaviour in iptables and ip6tables. From Subash Abhinov
Kasiviswanathan. This patch needed a couple of follow up patches to
get things tidy from Arnd Bergmann.
4) SNMP helper uses the ASN.1 code generator, from Taehee Yoo. Several
patches for this helper to prepare this change are also part of this
patch series.
5) Add 64-bit handles to uniquely objects in nf_tables, from Harsha
Sharma.
6) Remove log message that several netfilter subsystems print at
boot/load time.
7) Restore x_tables module autoloading, that got broken in a previous
patch to allow singleton NAT hook callback registration per hook
spot, from Florian Westphal. Moreover, return EBUSY to report that
the singleton NAT hook slot is already in instead.
8) Several fixes for the new nf_tables flowtable representation,
including incorrect error check after nf_tables_flowtable_lookup(),
missing Kconfig dependencies that lead to build breakage and missing
initialization of priority and hooknum in flowtable object.
9) Missing NETFILTER_FAMILY_ARP dependency in Kconfig for the clusterip
target. This is due to recent updates in the core to shrink the hook
array size and compile it out if no specific family is enabled via
.config file. Patch from Florian Westphal.
10) Remove duplicated include header files, from Wei Yongjun.
11) Sparse warning fix for the NFPROTO_INET handling from the core
due to missing static function definition, also from Wei Yongjun.
12) Restore ICMPv6 Parameter Problem error reporting when
defragmentation fails, from Subash Abhinov Kasiviswanathan.
13) Remove obsolete owner field initialization from struct
file_operations, patch from Alexey Dobriyan.
14) Use boolean datatype where needed in the Netfilter codebase, from
Gustavo A. R. Silva.
15) Remove double semicolon in dynset nf_tables expression, from
Luis de Bethencourt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) bpf array map HW offload, from Jakub.
2) support for bpf_get_next_key() for LPM map, from Yonghong.
3) test_verifier now runs loaded programs, from Alexei.
4) xdp cpumap monitoring, from Jesper.
5) variety of tests, cleanups and small x64 JIT optimization, from Daniel.
6) user space can now retrieve HW JITed program, from Jiong.
Note there is a minor conflict between Russell's arm32 JIT fixes
and removal of bpf_jit_enable variable by Daniel which should
be resolved by keeping Russell's comment and removing that variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The BPF verifier conflict was some minor contextual issue.
The TUN conflict was less trivial. Cong Wang fixed a memory leak of
tfile->tx_array in 'net'. This is an skb_array. But meanwhile in
net-next tun changed tfile->tx_arry into tfile->tx_ring which is a
ptr_ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar rationale as in a60dd35d2e ("bpf: change bpf_perf_event_output
arg5 type to ARG_CONST_SIZE_OR_ZERO"), change the type to CONST_SIZE_OR_ZERO
such that we can better deal with optimized code. No changes needed in
bpf_event_output() as it can also deal with 0 size entirely (e.g. as only
wake-up signal with empty frame in perf RB, or packet dumps w/o meta data
as another such possibility).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given BPF reaches far beyond just networking these days, it was
never intended to allow setting and in some cases reading those
knobs out of a user namespace root running without CAP_SYS_ADMIN,
thus tighten such access.
Also the bpf_jit_enable = 2 debugging mode should only be allowed
if kptr_restrict is not set since it otherwise can leak addresses
to the kernel log. Dump a note to the kernel log that this is for
debugging JITs only when enabled.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Useful for porting cls_bpf programs w/o increasing program
complexity limits much at the same time, so add the helper
to XDP as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds extack support for the u32 classifier as example for
delete and init callback.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack handling for the tcf_change_indev function which
is common used by TC classifier implementations.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for classifier delete callback api. This
prepares to handle extack support inside each specific classifier
implementation.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tcf_exts_validate function calls the act api change callback. For
preparing extack support for act api, this patch adds the extack as
parameter for this function which is common used in cls implementations.
Furthermore the tcf_exts_validate will call action init callback which
prepares the TC action subsystem for extack support.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for classifier change callback api. This
prepares to handle extack support inside each specific classifier
implementation.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for generic cls handling. The extack
will be set deeper to each called function which is not part of netdev
core api.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes some code style issues pointed out by checkpatch
inside the TC cls subsystem.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A persistent connection may send tiny amount of data (e.g. health-check)
for a long period of time. BBR's windowed min RTT filter may only see
RTT samples from delayed ACKs causing BBR to grossly over-estimate
the path delay depending how much the ACK was delayed at the receiver.
This patch skips RTT samples that are likely coming from delayed ACKs. Note
that it is possible the sender never obtains a valid measure to set the
min RTT. In this case BBR will continue to set cwnd to initial window
which seems fine because the connection is thin stream.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch avoids having TCP sender or congestion control
overestimate the min RTT by orders of magnitude. This happens when
all the samples in the windowed filter are one-packet transfer
like small request and health-check like chit-chat, which is farily
common for applications using persistent connections. This patch
tries to conservatively labels and skip RTT samples obtained from
this type of workload.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Letting tipc_poll() dereference a socket's pointer to struct tipc_group
entails a race risk, as the group item may be deleted in a concurrent
tipc_sk_join() or tipc_sk_leave() thread.
We now move the 'open' flag in struct tipc_group to struct tipc_sock,
and let the former retain only a pointer to the moved field. This will
eliminate the race risk.
Reported-by: syzbot+799dafde0286795858ac@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the switch block in l2tp_nl_cmd_session_create() that
checks pseudowire-specific parameters since just L2TP_PWTYPE_ETH and
L2TP_PWTYPE_PPP are currently supported and no actual checks are
performed. Moreover the L2TP_PWTYPE_IP/default case presents a harmless
issue in error handling (break instead of goto out_tunnel)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the newly introduced rdma_read_gids() to read the SGID and DGID for
the connection which returns GID correctly for RoCE transport as well.
rdma_addr_get_dgid() for RoCE for client side connections returns MAC
address, instead of DGID.
rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and
when more than one IP address is assigned to the netdevice.
Therefore use transport agnostic rdma_read_gids() API provided by rdma_cm
module.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove l2specific_len configuration parameter since now L2-Specific
Sublayer length is computed according to l2specific_type provided by
userspace.
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove l2specific_len dependency while building l2tpv3 header or
parsing the received frame since default L2-Specific Sublayer is
always four bytes long and we don't need to rely on a user supplied
value.
Moreover in l2tp netlink code there are no sanity checks to
enforce the relation between l2specific_len and l2specific_type,
so sending a malformed netlink message is possible to set
l2specific_type to L2TP_L2SPECTYPE_DEFAULT (or even
L2TP_L2SPECTYPE_NONE) and set l2specific_len to a value greater than
4 leaking memory on the wire and sending corrupted frames.
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add sanity check on l2specific_type provided by userspace in
l2tp_nl_cmd_session_create() since just L2TP_L2SPECTYPE_DEFAULT and
L2TP_L2SPECTYPE_NONE are currently supported.
Moreover explicitly set l2specific_type to L2TP_L2SPECTYPE_DEFAULT
only if the userspace does not provide a value for it
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warnings:
net/core/devlink.c:2297:25: warning:
symbol 'devlink_resource_find' was not declared. Should it be static?
net/core/devlink.c:2322:6: warning:
symbol 'devlink_resource_validate_children' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 41033f029e ("snmp: Remove duplicate OUTMCAST stat
increment") one line of code became unneeded.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_KASAN is set, we can use relatively large amounts of kernel
stack space:
net/caif/cfctrl.c:555:1: warning: the frame size of 1600 bytes is larger than 1280 bytes [-Wframe-larger-than=]
This adds convenience wrappers around cfpkt_extr_head(), which is responsible
for most of the stack growth. With those wrapper functions, gcc apparently
starts reusing the stack slots for each instance, thus avoiding the
problem.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several reasons for this:
* Several modules maintain internal version numbers, that they print at
boot/module load time, that are not exposed to userspace, as a
primitive mechanism to make revision number control from the earlier
days of Netfilter.
* IPset shows the protocol version at boot/module load time, instead
display this via module description, as Jozsef suggested.
* Remove copyright notice at boot/module load time in two spots, the
Netfilter codebase is a collective development effort, if we would
have to display copyrights for each contributor at boot/module load
time for each extensions we have, we would probably fill up logs with
lots of useless information - from a technical standpoint.
So let's be consistent and remove them all.
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
/proc has been ignoring struct file_operations::owner field for 10 years.
Specifically, it started with commit 786d7e1612
("Fix rmmod/read/write races in /proc entries"). Notice the chunk where
inode->i_fop is initialized with proxy struct file_operations for
regular files:
- if (de->proc_fops)
- inode->i_fop = de->proc_fops;
+ if (de->proc_fops) {
+ if (S_ISREG(inode->i_mode))
+ inode->i_fop = &proc_reg_file_ops;
+ else
+ inode->i_fop = de->proc_fops;
+ }
VFS stopped pinning module at this point.
# ipvs
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Return statements in functions returning bool should use
true/false instead of 1/0.
These issues were detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows deletion of objects via unique handle which can be
listed via '-a' option.
Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The basic SNMP ALG parse snmp ASN.1 payload
however, since 2012 linux kernel provide ASN.1 decoder library.
If we use ASN.1 decoder in the /lib/asn1_decoder.c, we can remove
about 1000 line of ASN.1 parsing routine.
To use asn1_decoder.c, we should write mib file(nf_nat_snmp_basic.asn1)
then /script/asn1_compiler.c makes *-asn1.c and *-asn1.h file
at the compiletime.(nf_nat_snmp_basic-asn1.c, nf_nat_snmp_basic-asn1.h)
The nf_nat_snmp_basic.asn1 is made by RFC1155, RFC1157, RFC1902, RFC1905,
RFC2578, RFC3416. of course that mib file supports only the basic SNMP ALG.
Previous SNMP ALG mangles only first octet of IPv4 address.
but after this patch, the SNMP ALG mangles whole IPv4 Address.
And SNMPv3 is not supported.
I tested with snmp commands such ans snmpd, snmpwalk, snmptrap.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The snmp_translate() receives ctinfo data to get dir value only.
because of caller already has dir value, we just replace ctinfo with dir.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
