commit b76d26d69e upstream.
There is no reason to assume that the IRQ rising edge (indicating that
the device start up phase is done) will happen after we request the IRQ.
If the device is already up by the time we request it, the call to
'wait_for_completion_timeout()' will timeout and we will fail the device
probe even though there's nothing wrong.
Fix it by just polling the status register until we get the indication that
the device is up and running. As a side effect of this fix, requesting the
IRQ is also moved to after the setup function.
Fixes: f110f3188e ("iio: temperature: Add support for LTC2983")
Reported-and-tested-by: Drew Fustini <drew@pdp7.com>
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210811133220.190264-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90268574a3 upstream.
The `compute_indices` and `populate_entries` macros operate on inclusive
bounds, and thus the `map_memory` macro which uses them also operates
on inclusive bounds.
We pass `_end` and `_idmap_text_end` to `map_memory`, but these are
exclusive bounds, and if one of these is sufficiently aligned (as a
result of kernel configuration, physical placement, and KASLR), then:
* In `compute_indices`, the computed `iend` will be in the page/block *after*
the final byte of the intended mapping.
* In `populate_entries`, an unnecessary entry will be created at the end
of each level of table. At the leaf level, this entry will map up to
SWAPPER_BLOCK_SIZE bytes of physical addresses that we did not intend
to map.
As we may map up to SWAPPER_BLOCK_SIZE bytes more than intended, we may
violate the boot protocol and map physical address past the 2MiB-aligned
end address we are permitted to map. As we map these with Normal memory
attributes, this may result in further problems depending on what these
physical addresses correspond to.
The final entry at each level may require an additional table at that
level. As EARLY_ENTRIES() calculates an inclusive bound, we allocate
enough memory for this.
Avoid the extraneous mapping by having map_memory convert the exclusive
end address to an inclusive end address by subtracting one, and do
likewise in EARLY_ENTRIES() when calculating the number of required
tables. For clarity, comments are updated to more clearly document which
boundaries the macros operate on. For consistency with the other
macros, the comments in map_memory are also updated to describe `vstart`
and `vend` as virtual addresses.
Fixes: 0370b31e48 ("arm64: Extend early page table code to allow for larger kernels")
Cc: <stable@vger.kernel.org> # 4.16.x
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210823101253.55567-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e10f9887e upstream.
When switching to an 'mm_struct' for the first time following an ASID
rollover, a new ASID may be allocated and assigned to 'mm->context.id'.
This reassignment can happen concurrently with other operations on the
mm, such as unmapping pages and subsequently issuing TLB invalidation.
Consequently, we need to ensure that (a) accesses to 'mm->context.id'
are atomic and (b) all page-table updates made prior to a TLBI using the
old ASID are guaranteed to be visible to CPUs running with the new ASID.
This was found by inspection after reviewing the VMID changes from
Shameer but it looks like a real (yet hard to hit) bug.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Jade Alglave <jade.alglave@arm.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210806113109.2475-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b07e990fb upstream.
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 01c60dcea9 ("drivers/misc: Add Aspeed P2A control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b49a0e69a7 upstream.
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 6c4e976785 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a89f355e46 upstream.
In "qmp_cooling_devices_register", the count value is initially
QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value,
the memory for cooling_devs is allocated. Then while calling the
"qmp_cooling_device_add" function, count value is post-incremented for
each child node.
This makes the out of bound access to the cooling_dev array. Fix it by
passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and
initializing the count to 0.
While at it, let's also free the memory allocated to cooling_dev if no
cooling device is found in DT and during unroll phase.
Cc: stable@vger.kernel.org # 5.4
Fixes: 05589b30b2 ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5e9314039 upstream.
Fix the pull up/down info for both the JZ4760 and JZ4770 SoCs, as the
previous values sometimes contradicted what's written in the programming
manual.
Fixes: b5c23aa465 ("pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs")
Cc: <stable@vger.kernel.org> # v4.12
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/20210717174836.14776-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b73e588f4 upstream.
Casting a small array of u8 to an unsigned long is *never* OK:
- it does funny thing when the array size is less than that of a long,
as it accesses random places in the stack
- it makes everything even more fun with a BE kernel
Fix this by building the unsigned long used as a bitmap byte by byte,
in a way that works across endianess and has no undefined behaviours.
An extra BUILD_BUG_ON() catches the unlikely case where the array
would be larger than a single unsigned long.
Fixes: 1490d9f841 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210725180830.250218-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d563236cc upstream.
The psi_ref_clk comes from the C2 node of the main_pll and periph_pll,
not the C3.
Fixes: 80c6b7a089 ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kris Chaplin <kris.chaplin@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210713144621.605140-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5f7912bb6 upstream.
Default to prefixed pkg-config when crosscompiling, this matches what
other parts of the tools/ directory already do.
[dlezcano] : Reworked description
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/31302992.qZodDJZGDc@devpool47
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 210f9df026 upstream.
The selftest for ftrace checks some features by checking if the README has
text that states the feature is supported by that kernel. Unfortunately,
this check gives false positives because it many not be checked if there's
spaces in the string to check. This is due to the compare between the
required variable with the ":README" string stripped, because neither has
quotes around them.
Link: https://lkml.kernel.org/r/20210820204742.087177341@goodmis.org
Cc: "Tzvetomir Stoyanov" <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 1b8eec510b ("selftests/ftrace: Support ":README" suffix for requires")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05a444d3f9 upstream.
Currently in the case where kmem_cache_alloc fails the null pointer
cf is dereferenced when assigning cf->is_capsnap = false. Fix this
by adding a null pointer check and return path.
Cc: stable@vger.kernel.org
Addresses-Coverity: ("Dereference null return")
Fixes: b2f9fa1f3b ("ceph: correctly handle releasing an embedded cap flush")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 732b33d0db upstream.
This patch addresses the following problems:
- priv can never be NULL, so this part of the check is useless
- if the loop ran through the whole list, priv->client is invalid and
it is more appropriate and sufficient to check for the end of
list_for_each_entry loop condition.
Link: http://lkml.kernel.org/r/20210727000709.225032-1-harshvardhan.jha@oracle.com
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b511d5bfa upstream.
Xen PV guests are specifying the highest used PFN via the max_pfn
field in shared_info. This value is used by the Xen tools when saving
or migrating the guest.
Unfortunately this field is misnamed, as in reality it is specifying
the number of pages (including any memory holes) of the guest, so it
is the highest used PFN + 1. Renaming isn't possible, as this is a
public Xen hypervisor interface which needs to be kept stable.
The kernel will set the value correctly initially at boot time, but
when adding more pages (e.g. due to memory hotplug or ballooning) a
real PFN number is stored in max_pfn. This is done when expanding the
p2m array, and the PFN stored there is even possibly wrong, as it
should be the last possible PFN of the just added P2M frame, and not
one which led to the P2M expansion.
Fix that by setting shared_info->max_pfn to the last possible PFN + 1.
Fixes: 98dd166ea3 ("x86/xen/p2m: hint at the last populated P2M entry")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20210730092622.9973-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9addd85fb upstream.
H_GetPerformanceCounterInfo (0xF080) hcall returns the counter data in
the result buffer. Result buffer has specific format defined in the PAPR
specification. One of the fields is counter offset and width of the
counter data returned.
Counter data are returned in a unsigned char array in big endian byte
order. To get the final counter data, the values must be left shifted
byte at a time. But commit 220a0c609a ("powerpc/perf: Add support for
the hv gpci (get performance counter info) interface") made the shifting
bitwise and also assumed little endian order. Because of that, hcall
counters values are reported incorrectly.
In particular this can lead to counters go backwards which messes up the
counter prev vs now calculation and leads to huge counter value
reporting:
#: perf stat -e hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
-C 0 -I 1000
time counts unit events
1.000078854 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
2.000213293 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
3.000320107 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
4.000428392 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
5.000537864 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
6.000649087 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
7.000760312 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
8.000865218 16,448 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
9.000978985 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
10.001088891 16,384 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
11.001201435 0 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
12.001307937 18,446,744,073,709,535,232 hv_gpci/system_tlbie_count_and_time_tlbie_instructions_issued/
Fix the shifting logic to correct match the format, ie. read bytes in
big endian order.
Fixes: e4f226b158 ("powerpc/perf/hv-gpci: Increase request buffer size")
Cc: stable@vger.kernel.org # v4.6+
Reported-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry<rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210813082158.429023-1-kjain@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a519dc7a7 upstream.
When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:
BUG: unable to handle page fault for address: ffffc9004069100c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
e1000_probe+0x41f/0xdb0 [e1000e]
local_pci_probe+0x42/0x80
(...)
The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.
Add the check to make this function XEN PV compatible.
Fixes: 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d643b6608 upstream.
A user space process should not need the CAP_SYS_ADMIN capability set
in order to perform a BLKREPORTZONE ioctl.
Getting the zone report is required in order to get the write pointer.
Neither read() nor write() requires CAP_SYS_ADMIN, so it is reasonable
that a user space process that can read/write from/to the device, also
can get the write pointer. (Since e.g. writes have to be at the write
pointer.)
Fixes: 3ed05a987e ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-3-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ead3b768bb upstream.
Zone management send operations (BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE
and BLKFINISHZONE) should be allowed under the same permissions as write().
(write() does not require CAP_SYS_ADMIN).
Additionally, other ioctls like BLKSECDISCARD and BLKZEROOUT only check if
the fd was successfully opened with FMODE_WRITE.
(They do not require CAP_SYS_ADMIN).
Currently, zone management send operations require both CAP_SYS_ADMIN
and that the fd was successfully opened with FMODE_WRITE.
Remove the CAP_SYS_ADMIN requirement, so that zone management send
operations match the access control requirement of write(), BLKSECDISCARD
and BLKZEROOUT.
Fixes: 3ed05a987e ("blk-zoned: implement ioctls")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: stable@vger.kernel.org # v4.10+
Link: https://lore.kernel.org/r/20210811110505.29649-2-Niklas.Cassel@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d977e0eba upstream.
This crash was observed with a failed assertion on device close:
BTRFS: Transaction aborted (error -28)
WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
FS: 0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
Call Trace:
flush_space+0x197/0x2f0 [btrfs]
btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
process_one_work+0x262/0x5e0
worker_thread+0x4c/0x320
? process_one_work+0x5e0/0x5e0
kthread+0x144/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
irq event stamp: 19334989
hardirqs last enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
softirqs last enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
---[ end trace 45939e308e0dd3c7 ]---
BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
BTRFS info (device vdd): forced readonly
BTRFS warning (device vdd): failed setting block group ro: -30
BTRFS info (device vdd): suspending dev_replace for unmount
assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 3982 Comm: umount Tainted: G W 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
FS: 00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
Call Trace:
btrfs_close_one_device.cold+0x11/0x55 [btrfs]
close_fs_devices+0x44/0xb0 [btrfs]
btrfs_close_devices+0x48/0x160 [btrfs]
generic_shutdown_super+0x69/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x2c/0xa0
cleanup_mnt+0x144/0x1b0
task_work_run+0x59/0xa0
exit_to_user_mode_loop+0xe7/0xf0
exit_to_user_mode_prepare+0xaf/0xf0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
close_ctree():
btrfs_dev_replace_suspend_for_unmount();
btrfs_close_devices():
btrfs_close_fs_devices():
btrfs_close_one_device():
ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&device->dev_state));
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a6166768 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac98141d14 upstream.
We use the async_delalloc_pages mechanism to make sure that we've
completed our async work before trying to continue our delalloc
flushing. The reason for this is we need to see any ordered extents
that were created by our delalloc flushing. However we're waking up
before we do the submit work, which is before we create the ordered
extents. This is a pretty wide race window where we could potentially
think there are no ordered extents and thus exit shrink_delalloc
prematurely. Fix this by waking us up after we've done the work to
create ordered extents.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87df7fb922 upstream.
When new work is added, io_wqe_enqueue() checks if we need to wake or
create a new worker. But that check is done outside the lock that
otherwise synchronizes us with a worker going to sleep, so we can end
up in the following situation:
CPU0 CPU1
lock
insert work
unlock
atomic_read(nr_running) != 0
lock
atomic_dec(nr_running)
no wakeup needed
Hold the wqe lock around the "need to wakeup" check. Then we can also get
rid of the temporary work_flags variable, as we know the work will remain
valid as long as we hold the lock.
Cc: stable@vger.kernel.org
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26578cda3d upstream.
->splice_fd_in is used only by splice/tee, but no other request checks
it for validity. Add the check for most of request types excluding
reads/writes/sends/recvs, we don't want overhead for them and can leave
them be as is until the field is actually used.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f44bc2acd6777d932de3d71a5692235b5b2b7397.1629451684.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d448fa0a8 upstream.
The TPS65910 RTC driver module doesn't auto-load because of the wrong
module alias that doesn't match the device name, fix it.
Cc: stable@vger.kernel.org
Reported-by: Anton Bambura <jenneron@protonmail.com>
Tested-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210808160030.8556-1-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 656f343d72 which is
commit 39ff83f2f6 upstream.
Arnd reports that this needs more review before being merged into all of
the trees.
Link: https://lore.kernel.org/r/CAK8P3a0z5jE=Z3Ps5bFTCFT7CHZR1JQ8VhdntDJAfsUxSPCcEw@mail.gmail.com
Reported-by: Arnd Bergmann <arnd@kernel.org>
Cc: Lukas Hannen <lukas.hannen@opensource.tttech-industrial.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 13ccaef77e which is
commit 406dd42bd1 upstream.
It is reported to cause regressions. A proposed fix has been posted,
but it is not in a released kernel yet. So just revert this from the
stable release so that the bug is fixed. If it's really needed we can
add it back in in a future release.
Link: https://lore.kernel.org/r/87ilz1pwaq.fsf@wylie.me.uk
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4b21d4e820 which is
commit b1a811633f upstream.
The backport of this is reported to be causing some problems, so revert
this for now until they are worked out.
Link: https://lore.kernel.org/r/CACPK8XfUWoOHr-0RwRoYoskia4fbAbZ7DYf5wWBnv6qUnGq18w@mail.gmail.com
Reported-by: Joel Stanley <joel@jms.id.au>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Pavel Skripkin <paskripkin@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 4711284768.
Botched backport, dropping to rework for next release.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aaedb9e00e upstream.
Since a few kernel releases the Pogoplug 4 has crashed like this
during boot:
Unable to handle kernel NULL pointer dereference at virtual address 00000002
(...)
[<c04116ec>] (strlen) from [<c00ead80>] (kstrdup+0x1c/0x4c)
[<c00ead80>] (kstrdup) from [<c04591d8>] (__clk_register+0x44/0x37c)
[<c04591d8>] (__clk_register) from [<c04595ec>] (clk_hw_register+0x20/0x44)
[<c04595ec>] (clk_hw_register) from [<c045bfa8>] (__clk_hw_register_mux+0x198/0x1e4)
[<c045bfa8>] (__clk_hw_register_mux) from [<c045c050>] (clk_register_mux_table+0x5c/0x6c)
[<c045c050>] (clk_register_mux_table) from [<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac)
[<c0acf3e0>] (kirkwood_clk_muxing_setup.constprop.0) from [<c0aceae0>] (of_clk_init+0x12c/0x214)
[<c0aceae0>] (of_clk_init) from [<c0ab576c>] (time_init+0x20/0x2c)
[<c0ab576c>] (time_init) from [<c0ab3d18>] (start_kernel+0x3dc/0x56c)
[<c0ab3d18>] (start_kernel) from [<00000000>] (0x0)
Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000)
This is because the "powersave" mux clock 0 was provided in an unterminated
array, which is required by the loop in the driver:
/* Count, allocate, and register clock muxes */
for (n = 0; desc[n].name;)
n++;
Here n will go out of bounds and then call clk_register_mux() on random
memory contents after the mux clock.
Fix this by terminating the array with a blank entry.
Fixes: 105299381d ("cpufreq: kirkwood: use the powersave multiplexer")
Cc: stable@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79fad92f2e upstream.
Currently there are (at least) two problems in the way pwm_bl starts
managing the enable_gpio pin. Both occur when the backlight is initially
off and the driver finds the pin not already in output mode and, as a
result, unconditionally switches it to output-mode and asserts the signal.
Problem 1: This could cause the backlight to flicker since, at this stage
in driver initialisation, we have no idea what the PWM and regulator are
doing (an unconfigured PWM could easily "rest" at 100% duty cycle).
Problem 2: This will cause us not to correctly honour the
post_pwm_on_delay (which also risks flickers).
Fix this by moving the code to configure the GPIO output mode until after
we have examines the handover state. That allows us to initialize
enable_gpio to off if the backlight is currently off and on if the
backlight is on.
Cc: stable@vger.kernel.org
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8510505d55 upstream.
MD5 is a weak digest algorithm that shouldn't be used for cryptographic
operation. It hinders the efficiency of a patch set that aims to limit
the digests allowed for the extended file attribute namely security.ima.
MD5 is no longer a requirement for IMA, nor should it be used there.
The sole place where we still use the MD5 algorithm inside IMA is setting
the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5'
parameter on the command line. With commit ab60368ab6 ("ima: Fallback
to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully
when CRYPTO_MD5 is not set:
ima: Can not allocate md5 (reason: -2)
ima: Allocating md5 failed, going to use default hash algorithm sha256
Remove the CRYPTO_MD5 dependency for IMA.
Signed-off-by: THOBY Simon <Simon.THOBY@viveris.fr>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
[zohar@linux.ibm.com: include commit number in patch description for
stable.]
Cc: stable@vger.kernel.org # 4.17
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59bda8ecee upstream.
Callers of fuse_writeback_range() assume that the file is ready for
modification by the server in the supplied byte range after the call
returns.
If there's a write that extends the file beyond the end of the supplied
range, then the file needs to be extended to at least the end of the range,
but currently that's not done.
There are at least two cases where this can cause problems:
- copy_file_range() will return short count if the file is not extended
up to end of the source range.
- FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file,
hence the region may not be fully allocated.
Fix by flushing writes from the start of the range up to the end of the
file. This could be optimized if the writes are non-extending, etc, but
it's probably not worth the trouble.
Fixes: a2bc923629 ("fuse: fix copy_file_range() in the writeback case")
Fixes: 6b1bdb56b1 ("fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76224355db upstream.
fuse_finish_open() will be called with FUSE_NOWRITE in case of atomic
O_TRUNC. This can deadlock with fuse_wait_on_page_writeback() in
fuse_launder_page() triggered by invalidate_inode_pages2().
Fix by replacing invalidate_inode_pages2() in fuse_finish_open() with a
truncate_pagecache() call. This makes sense regardless of FOPEN_KEEP_CACHE
or fc->writeback cache, so do it unconditionally.
Reported-by: Xie Yongji <xieyongji@bytedance.com>
Reported-and-tested-by: syzbot+bea44a5189836d956894@syzkaller.appspotmail.com
Fixes: e4648309b8 ("fuse: truncate pending writes on O_TRUNC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf781869e5 upstream.
Add pinctrl-names and pinctrl-0 properties on controllers that claims to
use pins to avoid failures due to
commit 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
and also to avoid using pins that may be claimed my other IPs.
Fixes: b7c2b61570 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7782bb8d8 upstream.
Clear nested.pi_pending on nested VM-Enter even if L2 will run without
posted interrupts enabled. If nested.pi_pending is left set from a
previous L2, vmx_complete_nested_posted_interrupt() will pick up the
stale flag and exit to userspace with an "internal emulation error" due
the new L2 not having a valid nested.pi_desc.
Arguably, vmx_complete_nested_posted_interrupt() should first check for
posted interrupts being enabled, but it's also completely reasonable that
KVM wouldn't screw up a fundamental flag. Not to mention that the mere
existence of nested.pi_pending is a long-standing bug as KVM shouldn't
move the posted interrupt out of the IRR until it's actually processed,
e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit
with a "pending" posted interrupt. Fixing the mess is a future problem.
Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI
descriptor as an error, this was a benign bug as the null PI descriptor
effectively served as a check on PI not being enabled. Even then, the
new flow did not become problematic until KVM started checking the result
of kvm_check_nested_events().
Fixes: 705699a139 ("KVM: nVMX: Enable nested posted interrupt processing")
Fixes: 966eefb896 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable")
Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210810144526.2662272-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81b4b56d4f upstream.
If we are emulating an invalid guest state, we don't have a correct
exit reason, and thus we shouldn't do anything in this function.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210826095750.1650467-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 95b5a48c4f ("KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn", 2019-06-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9130a2dfd upstream.
When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature
especially there's a big tsc warp (like a new vCPU is hot-added into VM
which has been up for a long time), tsc_offset is added by a large value
then go back to guest. This causes system time jump as tsc_timestamp is
not adjusted in the meantime and pvclock monotonic character.
To fix this, just notify kvm to update vCPU's guest time before back to
guest.
Cc: stable@vger.kernel.org
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1619576521-81399-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3e03bc136 upstream.
While in practice vcpu->vcpu_idx == vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.
Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
vcpu = kvm_get_vcpu(kvm, vcpu_id);
do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id. The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.
Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx. To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.
Fixes: 1ee0bc559d ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7177339d7 upstream.
Revert a misguided illegal GPA check when "translating" a non-nested GPA.
The check is woefully incomplete as it does not fill in @exception as
expected by all callers, which leads to KVM attempting to inject a bogus
exception, potentially exposing kernel stack information in the process.
WARNING: CPU: 0 PID: 8469 at arch/x86/kvm/x86.c:525 exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
CPU: 1 PID: 8469 Comm: syz-executor531 Not tainted 5.14.0-rc7-syzkaller #0
RIP: 0010:exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
Call Trace:
x86_emulate_instruction+0xef6/0x1460 arch/x86/kvm/x86.c:7853
kvm_mmu_page_fault+0x2f0/0x1810 arch/x86/kvm/mmu/mmu.c:5199
handle_ept_misconfig+0xdf/0x3e0 arch/x86/kvm/vmx/vmx.c:5336
__vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6021 [inline]
vmx_handle_exit+0x336/0x1800 arch/x86/kvm/vmx/vmx.c:6038
vcpu_enter_guest+0x2a1c/0x4430 arch/x86/kvm/x86.c:9712
vcpu_run arch/x86/kvm/x86.c:9779 [inline]
kvm_arch_vcpu_ioctl_run+0x47d/0x1b20 arch/x86/kvm/x86.c:10010
kvm_vcpu_ioctl+0x49e/0xe50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3652
The bug has escaped notice because practically speaking the GPA check is
useless. The GPA check in question only comes into play when KVM is
walking guest page tables (or "translating" CR3), and KVM already handles
illegal GPA checks by setting reserved bits in rsvd_bits_mask for each
PxE, or in the case of CR3 for loading PTDPTRs, manually checks for an
illegal CR3. This particular failure doesn't hit the existing reserved
bits checks because syzbot sets guest.MAXPHYADDR=1, and IA32 architecture
simply doesn't allow for such an absurd MAXPHYADDR, e.g. 32-bit paging
doesn't define any reserved PA bits checks, which KVM emulates by only
incorporating the reserved PA bits into the "high" bits, i.e. bits 63:32.
Simply remove the bogus check. There is zero meaningful value and no
architectural justification for supporting guest.MAXPHYADDR < 32, and
properly filling the exception would introduce non-trivial complexity.
This reverts commit ec7771ab47.
Fixes: ec7771ab47 ("KVM: x86: mmu: Add guest physical address check in translate_gpa()")
Cc: stable@vger.kernel.org
Reported-by: syzbot+200c08e88ae818f849ce@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210831164224.1119728-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 527f721478 upstream.
The recent commit
064855a690 ("x86/resctrl: Fix default monitoring groups reporting")
caused a RHEL build failure with an uninitialized variable warning
treated as an error because it removed the default case snippet.
The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly
uninitialized variable warnings to be treated as errors. This is also
reported by smatch via the 0day robot.
The error from the RHEL build is:
arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’:
arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
m->chunks += chunks;
^~
The upstream Makefile does not build using '-Werror=maybe-uninitialized'.
So, the problem is not seen there. Fix the problem by putting back the
default case snippet.
[ bp: note that there's nothing wrong with the code and other compilers
do not trigger this warning - this is being done just so the RHEL compiler
is happy. ]
Fixes: 064855a690 ("x86/resctrl: Fix default monitoring groups reporting")
Reported-by: Terry Bowman <Terry.Bowman@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb2853a6a4 upstream.
The ops->receive_buf() may be accessed concurrently from these two
functions. If the driver flushes data to the line discipline
receive_buf() method while tiocsti() is waiting for the
ops->receive_buf() to finish its work, the data race will happen.
For example:
tty_ioctl |tty_ldisc_receive_buf
->tioctsi | ->tty_port_default_receive_buf
| ->tty_ldisc_receive_buf
->hci_uart_tty_receive | ->hci_uart_tty_receive
->h4_recv | ->h4_recv
In this case, the h4 receive buffer will be overwritten by the
latecomer, and we will lost the data.
Hence, change tioctsi() function to use the exclusive lock interface
from tty_buffer to avoid the data race.
Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
