The rmnet_vnd_setup(), which is the callback of ->ndo_start_xmit() is
allowed to call concurrently because it uses RCU protected data.
So, it doesn't need tx lock.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo says:
====================
bareudp: several code cleanup for bareudp module
This patchset is to cleanup bareudp module code.
1. The first patch is to add module alias
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.
2. The second patch is to add extack message.
The extack error message is useful for noticing specific errors
when command is failed.
3. The third patch is to remove unnecessary udp_encap_enable().
In the bareudp_socket_create(), udp_encap_enable() is called.
But, the it's already called in the setup_udp_tunnel_sock().
So, it could be removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current code, udp_encap_enable() is called in
bareudp_socket_create().
But, setup_udp_tunnel_sock() internally calls udp_encap_enable().
So, udp_encap_enable() is unnecessary.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bareudp netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rohit Maheshwari says:
====================
cxgb4/chcr: ktls tx ofld support on T6 adapter
This series of patches add support for kernel tls offload in Tx direction,
over Chelsio T6 NICs. SKBs marked as decrypted will be treated as tls plain
text packets and then offloaded to encrypt using network device (chelsio T6
adapter).
This series is broken down as follows:
Patch 1 defines a new macro and registers tls_dev_add and tls_dev_del
callbacks. When tls_dev_add gets called we send a connection request to
our hardware and to make HW understand about tls offload. Its a partial
connection setup and only ipv4 part is done.
Patch 2 handles the HW response of the connection request and then we
request to update TCB and handle it's HW response as well. Also we save
crypto key locally. Only supporting TLS_CIPHER_AES_GCM_128_KEY_SIZE.
Patch 3 handles tls marked skbs (decrypted bit set) and sends it to ULD for
crypto handling. This code has a minimal portion of tx handler, to handle
only one complete record per skb.
Patch 4 hanldes partial end part of records. Also added logic to handle
multiple records in one single skb. It also adds support to send out tcp
option(/s) if exists in skb. If a record is partial but has end part of a
record, we'll fetch complete record and then only send it to HW to generate
HASH on complete record.
Patch 5 handles partial first or middle part of record, it uses AES_CTR to
encrypt the partial record. If we are trying to send middle record, it's
start should be 16 byte aligned, so we'll fetch few earlier bytes from the
record and then send it to HW for encryption.
Patch 6 enables ipv6 support and also includes ktls startistics.
v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.
- optimized tcb update using control queue.
- state machine handling when earlier states received.
- chcr_write_cpl_set_tcb_ulp function is shifted to patch3.
- un-necessary updating left variable.
v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>
- mss calculation logic.
- correct place for Alloc skb check.
- Replaced atomic_t with atomic64_t
- added few more statistics counters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding ipv6 support and ktls related statistics.
v1->v2:
- added blank lines at 2 places.
v3->v4:
- Replaced atomic_t with atomic64_t
- added few necessary stat counters.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch contains handling of first part or middle part of the record.
When we get a middle record, we will fetch few already sent bytes to
make packet start 16 byte aligned.
And if the packet has only the header part, we don't need to send it for
packet encryption, send that packet as a plaintext.
v1->v2:
- un-necessary updating left variable.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP segment can chop a record in any order. Record can either be
complete or it can be partial (first part which contains header,
middle part which doesn't have header or TAG, and the end part
which contains TAG. This patch handles partial end part of a tx
record. In case of partial end part's, driver will send complete
record to HW, so that HW will calculate GHASH (TAG) of complete
packet.
Also added support to handle multiple records in a segment.
v1->v2:
- miner change in calling chcr_write_cpl_set_tcb_ulp.
- no need of checking return value of chcr_ktls_write_tcp_options.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added tx handling in this patch. This includes handling of segments
contain single complete record.
v1->v2:
- chcr_write_cpl_set_tcb_ulp is added in this patch.
v3->v4:
- mss calculation logic.
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of this patch generated and saved crypto keys, handled HW
response of act_open_req and set_tcb_req. Defined connection state
update.
v1->v2:
- optimized tcb update using control queue.
- state machine handling when earlier states received.
v2->v3:
- Added one empty line after function declaration.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new macro is defined to enable ktls tx offload support on Chelsio
T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to
enable or disable ktls settings on HW.
In chcr, enabled tx offload flag in netdev and registered tls_dev_add
and tls_dev_del.
v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.
v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
net: allow user specify TC action HW stats type
Currently, when user adds a TC action and the action gets offloaded,
the user expects the HW stats to be counted and included in stats dump.
However, since drivers may implement different types of counting, there
is no way to specify which one the user is interested in.
For example for mlx5, only delayed counters are available as the driver
periodically polls for updated stats.
In case of mlxsw, the counters are queried on dump time. However, the
HW resources for this type of counters is quite limited (couple of
thousands). This limits the amount of supported offloaded filters
significantly. Without counter assigned, the HW is capable to carry
millions of those.
On top of that, mlxsw HW is able to support delayed counters as well in
greater numbers. That is going to be added in a follow-up patch.
This patchset allows user to specify one of the following types of HW
stats for added action:
immediate - queried during dump time
delayed - polled from HW periodically or sent by HW in async manner
disabled - no stats needed
Note that if "hw_stats" option is not passed, user does not care about
the type, just expects any type of stats.
Examples:
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 7 sec used 2 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
hw_stats disabled
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 11 sec used 4 sec
Action statistics:
Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 102 bytes 1 pkt
backlog 0b 0p requeues 0
hw_stats immediate
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, user who is adding an action expects HW to report stats,
however it does not have exact expectations about the stats types.
That is aligned with TCA_ACT_HW_STATS_TYPE_ANY.
Allow user to specify the type of HW stats for an action and require it.
Pass the information down to flow_offload layer.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new type for disabled HW stats and allow the value in
mlxsw offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set a flag in case rule counter was created. Only query the device for
stats of a rule, which has the valid counter assigned.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new type for delayed HW stats and allow the value in
mlx5 offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new type for immediate HW stats and allow the value in
mlxsw offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently don't allow actions with any other type to be inserted.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As there is one set of counters for the whole action chain, forbid to
mix the HW stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce flow_action_basic_hw_stats_types_check() helper and use it
in drivers. That sanitizes the drivers which do not have support
for action HW stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of directly checking number of action entries, use
flow_offload_has_one_action() helper.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initially, pass "ANY" (struct is zeroed) to the drivers as that is the
current implicit value coming down to flow_offload. Add a bool
indicating that entries have mixed HW stats type.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
ethtool: consolidate irq coalescing - other drivers
Convert more drivers following the groundwork laid in a recent
patch set [1]. The aim of the effort is to consolidate irq
coalescing parameter validation in the core.
This set converts all the drivers outside of drivers/net/ethernet.
Only vmxnet3 them was checking unsupported parameters.
The aim is to merge this via the net-next tree so we can
convert all drivers and make the checking mandatory.
[1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver correctly rejects all unsupported parameters.
As a side effect of these changes the error code for
unsupported params changes from EINVAL to EOPNOTSUPP.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently ipq806x soc use generic bitbang driver to
comunicate with the gmac ethernet interface.
Add a dedicated driver created by chunkeey to fix this.
Co-developed-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek says:
====================
tun: debug messages cleanup
While testing ethtool output for "strange" devices, I noticed confusing and
obviously incorrect message level information for a tun device and sent
a quick fix. The result of the upstream discussion was that tun driver
would rather deserve a more complex cleanup of the way it handles debug
messages.
The main problem is that all debugging statements and setting of message
level are controlled by TUN_DEBUG macro which is only defined if one edits
the source and rebuilds the module, otherwise all DBG1() and tun_debug()
statements do nothing.
This series drops the TUN_DEBUG switch and replaces custom tun_debug()
macro with standard netif_info() so that message level (mask) set and
displayed using ethtool works as expected. Some debugging messages are
dropped as they only notify about entering a function which can be done
easily using ftrace or kprobe.
Patch 1 is a trivial fix for compilation warning with W=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TUN_DEBUG and tun_debug() are no longer used anywhere, drop them.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tun driver uses custom macro tun_debug() which is only available if
TUN_DEBUG is set. Replace it by standard netif_ifinfo(). For that purpose,
rename tun_struct::debug to msg_enable and make it u32 and always present.
Finally, make tun_get_msglevel(), tun_set_msglevel() and TUNSETDEBUG ioctl
independent of TUN_DEBUG.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the tun_debug() statements only inform us about entering
a function which can be easily achieved with ftrace or kprobe. As
tun_debug() is no-op unless TUN_DEBUG is set which requires editing the
source and recompiling, setting up ftrace or kprobe is easier. Drop these
debug statements.
Also drop the tun_debug() statement informing about SIOCSIFHWADDR ioctl.
We can monitor these through rtnetlink and it makes little sense to log
address changes through ioctl but not changes through rtnetlink. Moreover,
this tun_debug() is called even if the actual address change fails which
makes it even less useful.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
This macro is no-op unless TUN_DEBUG is defined (which requires editing and
recompiling the source) and only does something if variable debug is 2 but
that variable is zero initialized and never set to anything else. Moreover,
the only use of the macro informs about entering function tun_chr_open()
which can be easily achieved using ftrace or kprobe.
Drop DBG1() macro, its only use and global variable debug.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comment above tun_flow_save_rps_rxhash() starts with "/**" which
makes it look like kerneldoc comment and results in warnings when
building with W=1. Fix the format to make it look like a normal comment.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller says:
====================
PCI: Implement function to read Device Serial Number
Several drivers read the Device Serial Number from the PCIe extended
configuration space. Each of these drivers implements a similar approach to
finding the position and then extracting the 8 bytes of data.
Implement a new helper function, pci_get_dsn, which can be used to extract
this data into an 8 byte array.
Modify the bnxt_en, qedf, ice, ixgbe and nfp drivers to use this new
function.
The intent for this is to reduce duplicate code across the various drivers,
and make it easier to write future code that wants to read the DSN. In
particular the ice driver will be using the DSN as its serial number when
implementing the DEVLINK_CMD_INFO_GET.
The new implementation in v2 significantly simplifies some of the callers
which just want to print the value out in MSB order. By returning things as
a u64 in CPU Endian order, the "%016llX" printf format specifier can be used
to correctly format the value.
Per patch changes since v1
PCI: Introduce pci_get_dsn
* Update commit message based on feedback from Bjorn Helgaas
* Modify the function to return a u64 (zero on no capability)
* This new implementation ensures that the first dword is the lower 32
bits and the second dword is the upper 32 bits.
bnxt_en: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* Copy it into the dsn[] array by using put_unaligned_le64
* Fix a pre-existing typo in the netdev_info error message
scsi: qedf: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* simplify the snprintf to use "%016llX"
* remove the unused 'i' variable
ice: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* simplify the snprintf to use "%016llX"
ixgbe: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* simplify the snprintf to use "%016llX"
nfp: Use pci_get_dsn()
* Added in v2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the newly added pci_get_dsn() function for obtaining the 64-bit
Device Serial Number in the nfp6000_read_serial and
nfp_6000_get_interface functions.
pci_get_dsn() reports the Device Serial number as a u64 value created by
combining two pci_read_config_dword functions. The lower 16 bits
represent the device interface value, and the next 48 bits represent the
serial value. Use put_unaligned_be32 and put_unaligned_be16 to convert
the serial value portion into a Big Endian formatted serial u8 array.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The original code used a simple for-loop to read the bytes in order into
a buffer one byte at a time.
The pci_get_dsn() function returns the DSN as a u64, correctly ordering
the upper and lower 32 bit dwords. Simplify the display code by using
%016llX to display the u64 DSN.
This should have equivalent behavior on both Little and Big Endian
systems. The bus will have correctly ordered the dwords in the CPU
endian format, while pci_get_dsn() will correctly order the lower and
higher dwords into a u64.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The pci_get_dsn() function will perform two pci_read_config_dword calls
to read the lower and upper config dwords. It bitwise ORs them into
a u64 value. Instead of using put_unaligned_le32 to convert the value to
LE32 format, just use the %016llX printf specifier. This will print the
u64 correct, putting the most significant byte of the value first. Since
pci_get_dsn() correctly orders the two dwords into a u64, this should
produce equivalent results in less code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The original code used a for-loop that looped over each of the 8 bytes
and copied them into a temporary buffer. pci_get_dsn() uses two calls to
pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus,
we can simplify the snprintf significantly using %016llX on a u64 value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
Use of put_unaligned_le64 should be correct. pci_get_dsn() will perform
two pci_read_config_dword calls. The first dword will be placed in the
first 32 bits of the u64, while the second dword will be placed in the
upper 32 bits of the u64.
On Little Endian systems, the least significant byte comes first, which
will be the least significant byte of the first dword, followed by the
least significant byte of the second dword. Since the _le32 variations
do not perform byte swapping, we will correctly copy the dwords into the
dsn[] array in the same order as before.
On Big Endian systems, the most significant byte of the second dword
will come first. put_unaligned_le64 will perform a CPU_TO_LE64, which
will swap things correctly before copying. This should also end up with
the correct bytes in the dsn[] array.
While at it, fix a small typo in the netdev_info error message when the
DSN cannot be read.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several device drivers read their Device Serial Number from the PCIe
extended config space.
Introduce a new helper function, pci_get_dsn(). This function reads the
eight bytes of the DSN and returns them as a u64. If the capability does not
exist for the device, the function returns 0.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already have a function called page_offset(), and this macro
is unused, so just delete it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi
hypervisor. The driver attaches to a VMware virtual device called
"precision clock" that provides a mechanism for querying host system time.
Similar to existing virtual PTP clock drivers (e.g. ptp_kvm), ptp_vmw
utilizes the kernel's PTP hardware clock API to implement a clock device
that can be used as a reference in Chrony for synchronizing guest time with
host.
The driver is only applicable to x86 guests running in VMware virtual
machines with precision clock virtual device present. It uses a VMware
specific hypercall mechanism to read time from the device.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Vivek Thampi <vithampi@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>