Commit graph

5539 commits

Author SHA1 Message Date
David S. Miller
9f0ca0c1a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-02-28

The following pull-request contains BPF updates for your *net-next* tree.

We've added 41 non-merge commits during the last 7 day(s) which contain
a total of 49 files changed, 1383 insertions(+), 499 deletions(-).

The main changes are:

1) BPF and Real-Time nicely co-exist.

2) bpftool feature improvements.

3) retrieve bpf_sk_storage via INET_DIAG.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 15:53:35 -08:00
Masahiro Yamada
fd63fab48f kbuild: remove unneeded semicolon at the end of cmd_dtb_check
This trailing semicolon is unneeded.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
2020-02-27 02:24:34 +09:00
Masahiro Yamada
7a04960560 kbuild: fix DT binding schema rule to detect command line changes
This if_change_rule is not working properly; it cannot detect any
command line change.

The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.

For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.

Fixes: 4f0e3a57d6 ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
2020-02-27 02:23:12 +09:00
Scott Branden
3cd046f182 scripts/bpf: Switch to more portable python3 shebang
Change "/usr/bin/python3" to "/usr/bin/env python3" for
more portable solution in bpf_helpers_doc.py.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225205426.6975-1-scott.branden@broadcom.com
2020-02-26 15:42:21 +01:00
Douglas Anderson
0ef82fcefb scripts/get_maintainer.pl: deprioritize old Fixes: addresses
Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers.  Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place.  Oops.

The problem was introduced recently when trying to add signatures from
Fixes.  The problem was that these email addresses were added too early
in the process of compiling our list of places to send.  Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.

Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:

  $ git format-patch d8549bcd0529~..d8549bcd0529
  $ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd
  Stephen Boyd <sboyd@codeaurora.org>...

  $ git format-patch 6d1238aa3395~..6d1238aa3395
  $ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy
  Andy Gross <andy.gross@linaro.org>

Let's move the adding of addresses from Fixes: to the end since the
email addresses from these are much more likely to be older.

After this patch the above examples get the right addresses for the two
examples.

Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid
Fixes: 2f5bd34369 ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 11:22:15 -08:00
Joe Perches
ef0c08192a get_maintainer: remove uses of P: for maintainer name
Commit 1ca84ed642 ("MAINTAINERS: Reclaim the P: tag for Maintainer
Entry Profile") changed the use of the "P:" tag from "Person" to
"Profile (ie: special subsystem coding styles and characteristics)"

Change how get_maintainer.pl parses the "P:" tag to match.

Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dan.j.william@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 11:22:15 -08:00
Masahiro Yamada
083bc0e1ce kbuild: fix mismatch between .version and include/generated/compile.h
Since commit 56d5893615 ("kbuild: do not create orphan built-in.a or
obj-y objects"), scripts/link-vmlinux.sh does nothing when descending
into init/.

Once the version number becomes out of sync between .version and
include/generated/compile.h, it is not self-healing.

[How to reproduce]

 $ echo 100 > .version
 $ make

You will see the number in the .version is always bigger than that in
compile.h by one. After this, every time you run 'make', the vmlinux is
re-linked even when none of source files is updated.

Fixes: 56d5893615 ("kbuild: do not create orphan built-in.a or obj-y objects")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-11 05:18:40 +09:00
Masahiro Yamada
9d1b38958b scripts/kallsyms: fix memory corruption caused by write over-run
memcpy() writes one more byte than allocated.

Fixes: 8d60526999 ("scripts/kallsyms: change table to store (strcut sym_entry *)")
Reported-by: youling257 <youling257@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2020-02-11 05:18:09 +09:00
Linus Torvalds
89a47dd1af Kbuild updates for v5.6 (2nd)
- fix randconfig to generate a sane .config
 
  - rename hostprogs-y / always to hostprogs / always-y, which are
    more natual syntax.
 
  - optimize scripts/kallsyms
 
  - fix yes2modconfig and mod2yesconfig
 
  - make multiple directory targets ('make foo/ bar/') work
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl47NfMVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRGwP/3AHO8P0wGEeFKs3ziSMjs2W7/Pj
 lN08Kuxm0u3LnyEEcHVUveoi+xBYqvrw0RsGgYf5S8q0Mpep7MPqbfkDUxV/0Zkj
 QP2CsvOTbjdBjH7q3ojkwLcDl0Pxu9mg3eZMRXZ2WQeNXuMRw6Bicoh7ElvB1Bv/
 HC+j30i2Me3cf/riQGSAsstvlXyIR8RaerR8PfRGESTysiiN76+JcHTatJHhOJL9
 O6XKkzo8/CXMYKKVF4Ae4NP+WFg6E96/pAPx0Rf47RbPX9UG35L9rkzTDnk70Ms6
 OhKiu3hXsRX7mkqApuoTqjge4+iiQcKZxYmMXU1vGlIRzjwg19/4YFP6pDSCcnIu
 kKb8KN4o4N41N7MFS3OLZWwISA8Vw6RbtwDZ3AghDWb7EHb9oNW42mGfcAPr1+wZ
 /KH6RHTzaz+5q2MgyMY1NhADFrhIT9CvDM+UJECgbokblnw7PHAnPmbsuVak9ZOH
 u9ojO1HpTTuIYO6N6v4K5zQBZF1N+RvkmBnhHd8j6SksppsCoC/G62QxgXhF2YK3
 FQMpATCpuyengLxWAmPEjsyyPOlrrdu9UxqNsXVy5ol40+7zpxuHwKcQKCa9urJR
 rcpbIwLaBcLhHU4BmvBxUk5aZxxGV2F0O0gXTOAbT2xhd6BipZSMhUmN49SErhQm
 NC/coUmQX7McxMXh
 =sv4U
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config
2020-02-09 16:05:50 -08:00
Linus Torvalds
41dcd67e88 A handful of small documentation fixes that wandered in.
-----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl49mtYPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Y/5sH+wX3mdrcC7pX2XALDvl35P+QB5CFy0v1bkMY
 KAi/Ulxd6aicnowsBx6wdqSZO01Bh0E/nc9x42WIbHBR9/J5ZlitpKj5pGi0JYE/
 vguMEFgAPQb1dx3EGJ56dxKqJ/+zICVLhf7pawP82QqE6z4Kuonp9AXR1UMRvWej
 /b1qobQB++skh+nfGYqt7c7D6MQjaSb+5+TkU6xbHfoeMHDJkNdBHiiM5IbVE/s2
 KgAngM7cTYeu4el4h6ue1ZJjbU2iOi1FJU95r2ufMYEt6EEfP2zkzCYXju/xyIbO
 2NsdY3xUHhr9H32xkopPMoYrnzuzoTv8xi1xkhsnbOPZzZQMPls=
 =zx2k
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.6-2' of git://git.lwn.net/linux

Pull Documentation fixes from Jonathan Corbet:
 "A handful of small documentation fixes that wandered in"

* tag 'docs-5.6-2' of git://git.lwn.net/linux:
  Allow git builds of Sphinx
  Documentation: changes.rst: update several outdated project URLs
  Documentation: build warnings related to missing blank lines after explicit markups has been fixed
  mailmap: add entry for Tiezhu Yang
  Documentation/ko_KR/howto: Update a broken link
  Documentation/ko_KR/howto: Update broken web addresses
  docs/locking: Fix outdated section names
2020-02-07 13:03:10 -08:00
Stephen Kitt
d1c9038ab5 Allow git builds of Sphinx
When using a non-release version of Sphinx, from a local build (with
improvements for kernel doc handling, why not),

	sphinx-build --version

reports versions of the form

	sphinx-build 3.0.0+/4703d9119972

i.e. base version, a plus symbol, slash, and the start of the git hash
of whatever repository the command is run in (no, not the hash that
was used to build Sphinx!).

This patch fixes the installation check in sphinx-pre-install to
recognise such version output.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200124183316.1719218-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-02-05 10:33:44 -07:00
Tetsuo Handa
089b7d890f kconfig: Invalidate all symbols after changing to y or m.
Since commit 89b9060987 ("kconfig: Add yes2modconfig and
mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after
changing to y or m, these targets did not save the changes.
Call sym_clear_all_valid() so that all symbols are revalidated.

Fixes: 89b9060987 ("kconfig: Add yes2modconfig and mod2yesconfig targets.")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-05 13:45:37 +09:00
Florian Westphal
1c948715a1 mm: remove __krealloc
Since 5.5-rc1 the last user of this function is gone, so remove the
functionality.

See commit
2ad9d7747c ("netfilter: conntrack: free extension area immediately")
for details.

Link: http://lkml.kernel.org/r/20191212223442.22141-1-fw@strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:24 +00:00
Masahiro Yamada
8d60526999 scripts/kallsyms: change table to store (strcut sym_entry *)
The symbol table is extended every 10000 addition by using realloc(),
where data copy might occur to the new buffer.

To decrease the amount of possible data copy, let's change the table
to store the pointer.

The symbol type + symbol name part is appended at the end of
(struct sym_entry), and allocated together with the struct body.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04 01:54:30 +09:00
Masahiro Yamada
be9f6133f8 scripts/kallsyms: rename local variables in read_symbol()
I will use 'sym' for the point to struce sym_entry in the next commit.
Rename 'sym', 'stype' to 'name', 'type', which are more intuitive.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04 01:54:15 +09:00
Masahiro Yamada
5f2fb52fac kbuild: rename hostprogs-y/always to hostprogs/always-y
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.

This commit renames like follows:

  always       ->  always-y
  hostprogs-y  ->  hostprogs

So, scripts/Makefile will look like this:

  always-$(CONFIG_BUILD_BIN2C) += ...
  always-$(CONFIG_KALLSYMS)    += ...
      ...
  hostprogs := $(always-y) $(always-m)

I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.

The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04 01:53:07 +09:00
Masahiro Yamada
c8fb7d7e48 kconfig: fix broken dependency in randconfig-generated .config
Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5)
produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y,
which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency.

This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs
CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the
value of CONFIG_EFI is calculated.

When this happens, the has_changed flag should be set.

Currently, it takes the result from the last iteration. It should
accumulate all the results of the loop.

Fixes: 3b9a19e089 ("kconfig: loop as long as we changed some symbols in randconfig")
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04 01:49:12 +09:00
Linus Torvalds
14cd0bd049 Kconfig updates for v5.6
- add 'yes2modconfig' and 'mod2yesconfig' targets
 
  - sanitize help text
 
  - various code cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl409w0VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGPycQAKz1wnrq+dzPVWzGdA/EtDx3ceFA
 getIw64yav40rQcWu1Yzv4O8Lehh6tKyp6x2B9gEQKz+GUlwaX+mt6RR1OhXEpDT
 atntkCIbXJzEjoZPgl4qUhz7rWVqF0Sx/U16dlc9ZyXPFjCYTsea3IUuKru4v5Rd
 vixq/7RI6RWTCUwztcNtzw0OeguRgOAnMcS0uEufQ3KS4SufXLfNFxZfaeo09bXV
 p4UnKncvcl8Gbto0IW6pQo4w62oIP7ojIsOIzsw2baQcvRSF6S8Tu1KRx8Bk6/Ez
 2TGn92LMEJEckPbGpyt5Q/vC08kLVz0lxCnGg9QebKijxhWt8SZNmX+uwow7oYlR
 rKd6l4Uki2C9nuUiLXicQ85Gy6ItXXH5c3PC+L0Ud+AqZF5MmAOjdrHN+Ty3MoIp
 slOvYOFBPpZ6yOxCYoMlsCd839BQbQbkn3zy86RMNB4Dz92BaH1mjWu5pv6fbywr
 CpAToFqEaBsdvkoMsFgOhdVVCgd/ep5VKFJlpVthluoGsBZwhdJBGGO+UHwIc28o
 cn9qKkM2vVz+vqYcUVP5H+w8FMBV0ibAuOvxb8trfUnDKwLX7TYBr+tCUWPA1TfN
 4nEf80A1KJ1ALqsOFApWnsGgZdimkDVsbHJI7ICDnwPCx8icKdz4QIEsEcQq+da0
 gHA2DH1q41rg1OnT
 =FgLk
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - add 'yes2modconfig' and 'mod2yesconfig' targets (useful mainly for
   turning syzbot configs into more modular ones as a step to minimizing
   the result)

 - sanitize help text

 - various code cleanups

* tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix documentation typos
  kconfig: fix an "implicit declaration of function" warning
  kconfig: fix nesting of symbol help text
  kconfig: distinguish between dependencies and visibility in help text
  kconfig: list all definitions of a symbol in help text
  kconfig: Add yes2modconfig and mod2yesconfig targets.
  kconfig: use $(PERL) in Makefile
  kconfig: fix too deep indentation in Makefile
  kconfig: localmodconfig: fix indentation for closing brace
  kconfig: localmodconfig: remove unused $config
  kconfig: squash prop_alloc() into menu_add_prop()
  kconfig: remove sym from struct property
  kconfig: remove 'prompt' argument from menu_add_prop()
  kconfig: move prompt handling to menu_add_prompt() from menu_add_prop()
  kconfig: remove 'prompt' symbol
  kconfig: drop T_WORD from the RHS of 'prompt' symbol
  kconfig: use parent->dep as the parentdep of 'menu'
  kconfig: remove the rootmenu check in menu_add_prop()
2020-02-01 10:25:55 -08:00
Linus Torvalds
368d060bb4 Kbuild updates for v5.6
- detect missing include guard in UAPI headers
 
  - do not create orphan built-in.a or obj-y objects
 
  - generate modules.builtin more simply, and drop tristate.conf
 
  - simplify built-in initramfs creation
 
  - make linux-headers deb package thinner
 
  - optimize the deb package build script
 
  - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl409uwVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsG6vAP/jky7LSuv6lpIcYhxOmzFfs7qTlA
 llZDmzTPi26/doV1P9LYMw6Pd4HV6Zeo/aFLolirCsp0kFBW/5b2C68OsXfotJOD
 0YxPeFMIsumsmAVdQ7lGQerS19BDcMrFJiKoLUuULH3bH0mjL/YVlFVg0Dmq77j1
 PDsyTihROajVmJBf8UMK65nUdCSLZihBsKyvj7SxYnlHAS1EaAT+RiwE7qAHoYW9
 C3TYwOa1e8u/0FmosKxSChl9Pq5ti/gcK4dVLs7bm4LmJEsqmLeR8BDM8xlaT/FE
 lFl7iPLO2cvhy76NsK8YBnTcRD445gBn+M3XFKZ3sDTVj7TkdaIWtVurf5IYo+BN
 bTJHac1E9nbpv6L7QIXhxLCGozEi0+pv/8pyhIrAv8XxmZXp7HJbon+siEg8Glez
 rbwM44kNPQk8xovVcoixh4+qRH9l49+zzT0h0kY1PWfJ6hp0D1xmG/v3kai8dErt
 X4w7xi5gOssYwZ5M0LuOQprDeL5DV/Caz5R1+maqVb2yhn2EBsJ6wC24/vawxhFj
 Kjx1g/NZIW4lnBrF1Ay4geF+f+0jd1bcTBqtNmC09uSTIBvEysZ3HNBf4Z9PFTGW
 jdQ7Qpowgy9SOLqZuE+OAuojq7xhfm1fkm/MBUFUYh/HKOXoiLAnVK1+x0BM0yJB
 ZhMwvmj9fKoqVpzx
 =i/xZ
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - detect missing include guard in UAPI headers

 - do not create orphan built-in.a or obj-y objects

 - generate modules.builtin more simply, and drop tristate.conf

 - simplify built-in initramfs creation

 - make linux-headers deb package thinner

 - optimize the deb package build script

 - misc cleanups

* tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  builddeb: split libc headers deployment out into a function
  builddeb: split kernel headers deployment out into a function
  builddeb: remove redundant make for ARCH=um
  builddeb: avoid invoking sub-shells where possible
  builddeb: remove redundant $objtree/
  builddeb: match temporary directory name to the package name
  builddeb: remove unneeded files in hdrobjfiles for headers package
  kbuild: use -S instead of -E for precise cc-option test in Kconfig
  builddeb: allow selection of .deb compressor
  kbuild: remove 'Building modules, stage 2.' log
  kbuild: remove *.tmp file when filechk fails
  kbuild: remove PYTHON2 variable
  modpost: assume STT_SPARC_REGISTER is defined
  gen_initramfs.sh: remove intermediate cpio_list on errors
  initramfs: refactor the initramfs build rules
  gen_initramfs.sh: always output cpio even without -o option
  initramfs: add default_cpio_list, and delete -d option support
  initramfs: generate dependency list and cpio at the same time
  initramfs: specify $(src)/gen_initramfs.sh as a prerequisite in Makefile
  initramfs: make initramfs compression choice non-optional
  ...
2020-02-01 10:01:52 -08:00
Linus Torvalds
7eec11d3a7 Merge branch 'akpm' (patches from Andrew)
Pull updates from Andrew Morton:
 "Most of -mm and quite a number of other subsystems: hotfixes, scripts,
  ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.

  MM is fairly quiet this time.  Holidays, I assume"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  kcov: ignore fault-inject and stacktrace
  include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
  execve: warn if process starts with executable stack
  reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
  init/main.c: fix misleading "This architecture does not have kernel memory protection" message
  init/main.c: fix quoted value handling in unknown_bootoption
  init/main.c: remove unnecessary repair_env_string in do_initcall_level
  init/main.c: log arguments and environment passed to init
  fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
  fs/binfmt_elf.c: coredump: delete duplicated overflow check
  fs/binfmt_elf.c: coredump: allocate core ELF header on stack
  fs/binfmt_elf.c: make BAD_ADDR() unlikely
  fs/binfmt_elf.c: better codegen around current->mm
  fs/binfmt_elf.c: don't copy ELF header around
  fs/binfmt_elf.c: fix ->start_code calculation
  fs/binfmt_elf.c: smaller code generation around auxv vector fill
  lib/find_bit.c: uninline helper _find_next_bit()
  lib/find_bit.c: join _find_next_bit{_le}
  uapi: rename ext2_swab() to swab() and share globally in swab.h
  lib/scatterlist.c: adjust indentation in __sg_alloc_table
  ...
2020-01-31 12:16:36 -08:00
Luca Ceresoli
4efc61c798 scripts/spelling.txt: add "issus" typo
Add "issus" and correct it as "issues".

Link: http://lkml.kernel.org/r/20200105221950.8384-1-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:36 -08:00
Xiong
2ab1278fe4 scripts/spelling.txt: add more spellings to spelling.txt
Here are some of the common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel.  Most of them still
exist in more than two source files.

Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com
Signed-off-by: Xiong <xndchn@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:36 -08:00
Linus Torvalds
893e591b59 Devicetree updates for v5.6:
- Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)
 
 - Fix for DMA coherent devices on Power
 
 - Rework and simplify the DT phandle cache code
 
 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI
 
 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730
 
 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961
 
 - Add USB 'super-speed-plus' as a documented speed
 
 - Vendor prefixes for broadmobi, calaosystems, kam, and mps
 
 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl4x8eIQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw01FD/9MTmExKdgOc2I0u5MKIa+VXGeJKqfR0Liv
 irQBPVljPUAr7cDZJ4XX4YIuJ0Gh+MTLSF0QFp7kHyeVnfq+6rNMjwtUTpJSKCZb
 7nXQPguTDd2Guc0ycz1AG+nm2ZsFkaxg2GVFtDwA4aLGTho0oKYqFg8KUpZDAU9K
 HkDDyvDSFLZj48yn1yggs3d6kWh9ERTwK2ilDyHEsfJsZuD694X7GtSm0Vwlddti
 iuV/dTIsDfLPYFhDyz0sy21Kei/EWzMkB9sPIX/AhFQSd5/kgDqj1gL4SswbiV2a
 +pdjb0hcDpcpq4AxqGd5L4Jou4Zf9Agy+FNFkgia77MKZSwJo3lGq6GxZfXlu+L3
 XIV+lmjFILh6OtxHJBItDofqSO3jiGhj5THy16x0j6iwa/IHS3iGmp6MV4D75gvt
 +fvjRPrTwNmiaT8ZsjKG9EjnidLAWdwuhOrpqYi4hkQNRhwbA9pSr5ZUFz3G1LRS
 hLUXcBnZaQlfs8pgbzdv2n727WrGsUe1xFRj69nvl1GVIWPu2J14D1c4LU0+uCxH
 3kYcdyulTqwymRfDGBPEn1llp4N5sekJh0MYuYvNY3YtM/AQTE7FoKfR69xOk3Xa
 /Y1GddE0+suHAby7n2RLGGgpSv4notANYaEEsw0yiywgqkSr2kU67zI7hwU03Kux
 KAJZr365aQ==
 =dsEz
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)

 - Fix for DMA coherent devices on Power

 - Rework and simplify the DT phandle cache code

 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI

 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730

 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961

 - Add USB 'super-speed-plus' as a documented speed

 - Vendor prefixes for broadmobi, calaosystems, kam, and mps

 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes

* tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
  of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
  dt-bindings: leds: Convert gpio-leds to DT schema
  dt-bindings: leds: Convert common LED binding to schema
  dt-bindings: PCI: Convert generic host binding to DT schema
  dt-bindings: PCI: Convert Arm Versatile binding to DT schema
  dt-bindings: Be explicit about installing deps
  dt-bindings: stm32: convert dfsdm to json-schema
  dt-bindings: serial: Convert STM32 UART to json-schema
  dt-bindings: serial: Convert rs485 bindings to json-schema
  dt-bindings: timer: Use non-empty ranges in example
  dt-bindings: arm-boards: typo fix
  dt-bindings: Add TI and Infineon VR Controllers as trivial devices
  dt-binding: usb: add "super-speed-plus"
  dt-bindings: rcar-csi2: Convert bindings to json-schema
  dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  dt-bindings: Convert Faraday FTIDE010 to DT schema
  dt-bindings: Create DT bindings for PATA controllers
  dt-bindings: Create DT bindings for SATA controllers
  dt: bindings: add vendor prefix for Kamstrup A/S
  ...
2020-01-30 07:47:58 -08:00
Linus Torvalds
05ef8b97dd It has been a relatively quiet cycle for documentation, but there's still a
couple of things of note:
 
  - Conversion of the NFS documentation to RST
 
  - A new document on how to help with documentation (and a maintainer
    profile entry too)
 
 Plus the usual collection of typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl4wnWwPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YFPIH/069z5bJMrT3QRzENu8A9Elz76IXoy7pJOmJ
 53Ml5+c4sYpvV3o6d9n5TSvdy1pH0Shw73FbJzUIMj0ZCcHysWVO1eBDlcj8soJQ
 UonCXbKc+30AJBoKZqAC3jjFw0/fXwD1x+GzQo+l0LMQDOc0i0Luv8/riR5c9hEO
 5TOXB2GyhHnbSFxzcN9afmBsuNz1cPa/fg5q6zL+5Q/fUUOJ6IcYwq165P2EwZdm
 KRah299VU/XhrYlHJX7OZX3ck9+PaYURSpv4KH81J4jhmoBWAw5jPt77Qw8aN3w9
 LcNip+qgpx9wC7OgBiqdJkKcvsNy76pfDhUOj+XarGisA8031d0=
 =9m/7
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.6' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "It has been a relatively quiet cycle for documentation, but there's
  still a couple of things of note:

   - Conversion of the NFS documentation to RST

   - A new document on how to help with documentation (and a maintainer
     profile entry too)

  Plus the usual collection of typo fixes, etc"

* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
  docs: filesystems: add overlayfs to index.rst
  docs: usb: remove some broken references
  scripts/find-unused-docs: Fix massive false positives
  docs: nvdimm: use ReST notation for subsection
  zram: correct documentation about sysfs node of huge page writeback
  Documentation: zram: various fixes in zram.rst
  Add a maintainer entry profile for documentation
  Add a document on how to contribute to the documentation
  docs: Keep up with the location of NoUri
  Documentation: Call out example SYM_FUNC_* usage as x86-specific
  Documentation: nfs: fault_injection: convert to ReST
  Documentation: nfs: pnfs-scsi-server: convert to ReST
  Documentation: nfs: convert pnfs-block-server to ReST
  Documentation: nfs: idmapper: convert to ReST
  Documentation: convert nfsd-admin-interfaces to ReST
  Documentation: nfs-rdma: convert to ReST
  Documentation: nfsroot.rst: COSMETIC: refill a paragraph
  Documentation: nfsroot.txt: convert to ReST
  Documentation: convert nfs.txt to ReST
  Documentation: filesystems: convert vfat.txt to RST
  ...
2020-01-29 15:27:31 -08:00
Linus Torvalds
ca9b5b6283 TTY/Serial driver updates for 5.6-rc1
Here are the big set of tty and serial driver updates for 5.6-rc1
 
 Included in here are:
 	- dummy_con cleanups (touches lots of arch code)
 	- sysrq logic cleanups (touches lots of serial drivers)
 	- samsung driver fixes (wasn't really being built)
 	- conmakeshash move to tty subdir out of scripts
 	- lots of small tty/serial driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
 0O8ef7PjFwCU4s227UTv
 =6m40
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver updates for 5.6-rc1

  Included in here are:
   - dummy_con cleanups (touches lots of arch code)
   - sysrq logic cleanups (touches lots of serial drivers)
   - samsung driver fixes (wasn't really being built)
   - conmakeshash move to tty subdir out of scripts
   - lots of small tty/serial driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
  tty: n_hdlc: Use flexible-array member and struct_size() helper
  tty: baudrate: SPARC supports few more baud rates
  tty: baudrate: Synchronise baud_table[] and baud_bits[]
  tty: serial: meson_uart: Add support for kernel debugger
  serial: imx: fix a race condition in receive path
  serial: 8250_bcm2835aux: Document struct bcm2835aux_data
  serial: 8250_bcm2835aux: Use generic remapping code
  serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
  serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
  serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
  serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
  serial_core: Remove unused member in uart_port
  vt: Correct comment documenting do_take_over_console()
  vt: Delete comment referencing non-existent unbind_con_driver()
  arch/xtensa/setup: Drop dummy_con initialization
  arch/x86/setup: Drop dummy_con initialization
  arch/unicore32/setup: Drop dummy_con initialization
  arch/sparc/setup: Drop dummy_con initialization
  arch/sh/setup: Drop dummy_con initialization
  arch/s390/setup: Drop dummy_con initialization
  ...
2020-01-29 10:13:27 -08:00
Linus Torvalds
bd2463ac7d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...
2020-01-28 16:02:33 -08:00
Masahiro Yamada
451dff37f0 builddeb: split libc headers deployment out into a function
Deploy user-space headers (linux-libc-dev package) in a separate
function for readability.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
3126c17d28 builddeb: split kernel headers deployment out into a function
Deploy kernel headers (linux-headers package) in a separate function
for readability.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
aae6a67124 builddeb: remove redundant make for ARCH=um
The kernel build has already been done before builddeb is invoked.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
9a92eee387 builddeb: avoid invoking sub-shells where possible
The commands surrounded by ( ... ) is run in a sub-shell, but you do
not have to spawn a sub-shell for every single line.

Use just one ( ... ) for creating debian/hdrsrcfiles.

For tar, use -C option instead.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
f9a4711ebb builddeb: remove redundant $objtree/
This script works only when it is invoked in the $objtree, that is,
it is already relying on $objtree is '.'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
1694e94e4f builddeb: match temporary directory name to the package name
The temporary directory names, debian/hdrtmp (linux-headers package)
vs debian/headertmp (linux-libc-dev package), are confusing.

Matching the directory name to the package name is clearer, IMHO.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Masahiro Yamada
7e61b167eb builddeb: remove unneeded files in hdrobjfiles for headers package
- We do not need tools/objtool/fixdep or tools/objtool/sync-check.sh
   for building external modules. Including tools/objtool/objtool is
   enough.

 - gcc-common.h is a check-in file. I do not see any point to search
   for it in objtree.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29 01:51:30 +09:00
Linus Torvalds
8b561778f2 Merge branch 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
 "The main changes are to move the ORC unwind table sorting from early
  init to build-time - this speeds up booting.

  No change in functionality intended"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix !CONFIG_MODULES build warning
  x86/unwind/orc: Remove boot-time ORC unwind tables sorting
  scripts/sorttable: Implement build-time ORC unwind table sorting
  scripts/sorttable: Rename 'sortextable' to 'sorttable'
  scripts/sortextable: Refactor the do_func() function
  scripts/sortextable: Remove dead code
  scripts/sortextable: Clean up the code to meet the kernel coding style better
  scripts/sortextable: Rewrite error/success handling
2020-01-28 08:38:25 -08:00
Rob Herring
e9a3bfe38e scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
This reverts upstream commit 18d7b2f4ee45fec422b7d82bab0b3c762ee907e4. A
revert in upstream dtc is pending.

This commit didn't work for properties such as 'interrupt-map' that have
phandle in the middle of an entry. It would also not work for a 0 or -1
phandle value that acts as a NULL.

Signed-off-by: Rob Herring <robh@kernel.org>
2020-01-28 10:21:47 -06:00
Geert Uytterhoeven
1630146db2 scripts/find-unused-docs: Fix massive false positives
scripts/find-unused-docs.sh invokes scripts/kernel-doc to find out if a
source file contains kerneldoc or not.

However, as it passes the no longer supported "-text" option to
scripts/kernel-doc, the latter prints out its help text, causing all
files to be considered containing kerneldoc.

Get rid of these false positives by removing the no longer supported
"-text" option from the scripts/kernel-doc invocation.

Cc: stable@vger.kernel.org  # 4.16+
Fixes: b051426753 ("scripts: kernel-doc: get rid of unused output formats")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200127093107.26401-1-geert+renesas@glider.be
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-01-27 14:25:06 -07:00
Linus Torvalds
6a1000bd27 ioremap changes for 5.6
- remove ioremap_nocache given that is is equivalent to
    ioremap everywhere
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl4vKHwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMPGBAAuVNUZaZfWYHpiVP2oRcUQUguFiD3NTbknsyzV2oH
 J9P0GfeENSKwE9OOhZ7XIjnCZAJwQgTK/ppQY5yiQ/KAtYyyXjXEJ6jqqjiTDInr
 +3+I3t/LhkgrK7tMrb7ylTGa/d7KhaciljnOXC8+b75iddvM9I1z2pbHDbppZMS9
 wT4RXL/cFtRb85AfOyPLybcka3f5P2gGvQz38qyimhJYEzHDXZu9VO1Bd20f8+Xf
 eLBKX0o6yWMhcaPLma8tm0M0zaXHEfLHUKLSOkiOk+eHTWBZ3b/w5nsOQZYZ7uQp
 25yaClbameAn7k5dHajduLGEJv//ZjLRWcN3HJWJ5vzO111aHhswpE7JgTZJSVWI
 ggCVkytD3ESXapvswmACSeCIDMmiJMzvn6JvwuSMVB7a6e5mcqTuGo/FN+DrBF/R
 IP+/gY/T7zIIOaljhQVkiEIIwiD/akYo0V9fheHTBnqcKEDTHV4WjKbeF6aCwcO+
 b8inHyXZSKSMG//UlDuN84/KH/o1l62oKaB1uDIYrrL8JVyjAxctWt3GOt5KgSFq
 wVz1lMw4kIvWtC/Sy2H4oB+RtODLp6yJDqmvmPkeJwKDUcd/1JKf0KsZ8j3FpGei
 /rEkBEss0KBKyFAgBSRO2jIpdj2epgcBcsdB/r5mlhcn8L77AS6mHbA173kY4pQ/
 Kdg=
 =TUCJ
 -----END PGP SIGNATURE-----

Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap

Pull ioremap updates from Christoph Hellwig:
 "Remove the ioremap_nocache API (plus wrappers) that are always
  identical to ioremap"

* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
  remove ioremap_nocache and devm_ioremap_nocache
  MIPS: define ioremap_nocache to ioremap
2020-01-27 13:03:00 -08:00
Linus Torvalds
0238d3c753 arm64 updates for 5.6
- New architecture features
 	* Support for Armv8.5 E0PD, which benefits KASLR in the same way as
 	  KPTI but without the overhead. This allows KPTI to be disabled on
 	  CPUs that are not affected by Meltdown, even is KASLR is enabled.
 
 	* Initial support for the Armv8.5 RNG instructions, which claim to
 	  provide access to a high bandwidth, cryptographically secure hardware
 	  random number generator. As well as exposing these to userspace, we
 	  also use them as part of the KASLR seed and to seed the crng once
 	  all CPUs have come online.
 
 	* Advertise a bunch of new instructions to userspace, including support
 	  for Data Gathering Hint, Matrix Multiply and 16-bit floating point.
 
 - Kexec
 	* Cleanups in preparation for relocating with the MMU enabled
 	* Support for loading crash dump kernels with kexec_file_load()
 
 - Perf and PMU drivers
 	* Cleanups and non-critical fixes for a couple of system PMU drivers
 
 - FPU-less (aka broken) CPU support
 	* Considerable fixes to support CPUs without the FP/SIMD extensions,
 	  including their presence in heterogeneous systems. Good luck finding
 	  a 64-bit userspace that handles this.
 
 - Modern assembly function annotations
 	* Start migrating our use of ENTRY() and ENDPROC() over to the
 	  new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to
 	  aid debuggers
 
 - Kbuild
 	* Cleanup detection of LSE support in the assembler by introducing
 	  'as-instr'
 
 	* Remove compressed Image files when building clean targets
 
 - IP checksumming
 	* Implement optimised IPv4 checksumming routine when hardware offload
 	  is not in use. An IPv6 version is in the works, pending testing.
 
 - Hardware errata
 	* Work around Cortex-A55 erratum #1530923
 
 - Shadow call stack
 	* Work around some issues with Clang's integrated assembler not liking
 	  our perfectly reasonable assembly code
 
 	* Avoid allocating the X18 register, so that it can be used to hold the
 	  shadow call stack pointer in future
 
 - ACPI
 	* Fix ID count checking in IORT code. This may regress broken firmware
 	  that happened to work with the old implementation, in which case we'll
 	  have to revert it and try something else
 
 	* Fix DAIF corruption on return from GHES handler with pseudo-NMIs
 
 - Miscellaneous
 	* Whitelist some CPUs that are unaffected by Spectre-v2
 
 	* Reduce frequency of ASID rollover when KPTI is compiled in but
 	  inactive
 
 	* Reserve a couple of arch-specific PROT flags that are already used by
 	  Sparc and PowerPC and are planned for later use with BTI on arm64
 
 	* Preparatory cleanup of our entry assembly code in preparation for
 	  moving more of it into C later on
 
 	* Refactoring and cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl4oY+IQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNNfRB/4p3vax0hqaOnLRvmJPRXF31B8oPlivnr2u
 6HCA9LkdU5IlrgaTNOJ/sQEqJAPOPCU7v49Ol0iYw0iKL1suUE7Ikui5VB6Uybqt
 YbfF5UNzfXAMs2A86TF/hzqhxw+W+lpnZX8NVTuQeAODfHEGUB1HhTLfRi9INsER
 wKEAuoZyuSUibxTFvji+DAq7nVRniXX7CM7tE385pxDisCMuu/7E5wOl+3EZYXWz
 DTGzTbHXuVFL+UFCANFEUlAtmr3dQvPFIqAwVl/CxjRJjJ7a+/G3cYLsHFPrQCjj
 qYX4kfhAeeBtqmHL7YFNWFwFs5WaT5UcQquFO665/+uCTWSJpORY
 =AIh/
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "The changes are a real mixed bag this time around.

  The only scary looking one from the diffstat is the uapi change to
  asm-generic/mman-common.h, but this has been acked by Arnd and is
  actually just adding a pair of comments in an attempt to prevent
  allocation of some PROT values which tend to get used for
  arch-specific purposes. We'll be using them for Branch Target
  Identification (a CFI-like hardening feature), which is currently
  under review on the mailing list.

  New architecture features:

   - Support for Armv8.5 E0PD, which benefits KASLR in the same way as
     KPTI but without the overhead. This allows KPTI to be disabled on
     CPUs that are not affected by Meltdown, even is KASLR is enabled.

   - Initial support for the Armv8.5 RNG instructions, which claim to
     provide access to a high bandwidth, cryptographically secure
     hardware random number generator. As well as exposing these to
     userspace, we also use them as part of the KASLR seed and to seed
     the crng once all CPUs have come online.

   - Advertise a bunch of new instructions to userspace, including
     support for Data Gathering Hint, Matrix Multiply and 16-bit
     floating point.

  Kexec:

   - Cleanups in preparation for relocating with the MMU enabled

   - Support for loading crash dump kernels with kexec_file_load()

  Perf and PMU drivers:

   - Cleanups and non-critical fixes for a couple of system PMU drivers

  FPU-less (aka broken) CPU support:

   - Considerable fixes to support CPUs without the FP/SIMD extensions,
     including their presence in heterogeneous systems. Good luck
     finding a 64-bit userspace that handles this.

  Modern assembly function annotations:

   - Start migrating our use of ENTRY() and ENDPROC() over to the
     new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
     to aid debuggers

  Kbuild:

   - Cleanup detection of LSE support in the assembler by introducing
     'as-instr'

   - Remove compressed Image files when building clean targets

  IP checksumming:

   - Implement optimised IPv4 checksumming routine when hardware offload
     is not in use. An IPv6 version is in the works, pending testing.

  Hardware errata:

   - Work around Cortex-A55 erratum #1530923

  Shadow call stack:

   - Work around some issues with Clang's integrated assembler not
     liking our perfectly reasonable assembly code

   - Avoid allocating the X18 register, so that it can be used to hold
     the shadow call stack pointer in future

  ACPI:

   - Fix ID count checking in IORT code. This may regress broken
     firmware that happened to work with the old implementation, in
     which case we'll have to revert it and try something else

   - Fix DAIF corruption on return from GHES handler with pseudo-NMIs

  Miscellaneous:

   - Whitelist some CPUs that are unaffected by Spectre-v2

   - Reduce frequency of ASID rollover when KPTI is compiled in but
     inactive

   - Reserve a couple of arch-specific PROT flags that are already used
     by Sparc and PowerPC and are planned for later use with BTI on
     arm64

   - Preparatory cleanup of our entry assembly code in preparation for
     moving more of it into C later on

   - Refactoring and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
  arm64: acpi: fix DAIF manipulation with pNMI
  arm64: kconfig: Fix alignment of E0PD help text
  arm64: Use v8.5-RNG entropy for KASLR seed
  arm64: Implement archrandom.h for ARMv8.5-RNG
  arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
  arm64: entry: Avoid empty alternatives entries
  arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
  arm64: csum: Fix pathological zero-length calls
  arm64: entry: cleanup sp_el0 manipulation
  arm64: entry: cleanup el0 svc handler naming
  arm64: entry: mark all entry code as notrace
  arm64: assembler: remove smp_dmb macro
  arm64: assembler: remove inherit_daif macro
  ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
  mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
  arm64: Use macros instead of hard-coded constants for MAIR_EL1
  arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
  arm64: kernel: avoid x18 in __cpu_soft_restart
  arm64: kvm: stop treating register x18 as caller save
  arm64/lib: copy_page: avoid x18 register in assembler code
  ...
2020-01-27 08:58:19 -08:00
David S. Miller
4d8773b68e Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor conflict in mlx5 because changes happened to code that has
moved meanwhile.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26 10:40:21 +01:00
Linus Torvalds
2821e26f3a ARM fixes for 5.5:
- fix ftrace relocation type filtering
 - relax arch timer version check
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAl4sh1sACgkQ9OeQG+St
 rGTv9hAArEcxTDLg10goPy4bnuWIJKOkFoN6pR0DUyfBEFySKSSPiiPXiNlQr3iQ
 d2KLmfHA5bCjvasmvqcHbEWTU5dgvraP5PhcucI5KZRmIqINghjWjsnotMjyK69H
 PbgaKW1Ghqw7L4VXzA7USy/F9smugBkPMpAMVYAo9r66JmPQF1ZfIdSEAXarpWgc
 y5GpsnVVqDrrLnrdKIXdK93QYN7A6HRcF2bqsd7tK40ogyfI9Eb5FEZeF7R8kX1h
 PIK3MB5MiZ0FuQVto0GBif0yk4/vn5z11U2ebvOpmUY+OHhqGJ6hYCrnkVTTLAHn
 h6cbTofG0oIoTd+k9+3qTpSsbkErRPzK4WiOPVyYdSywIzwmbvQF4L260J59ZU5u
 eVF5c/m9jHgG4lSRsGKVwb+zRfURMnWwry/+tsVUAGYmsTGT6tYRKWrGaUUDw1em
 RGNnPBkabQB8opiodHNe0kepW/LIQHRFXZ8QbP66h/3qlcIinT/m3j+pLERyVyFD
 nnOFkRyyqEJtjRqtNLLqBcMo77+8BV1bW5BsiBYvTp2VVSsSiANxEfsonQ0043Az
 mgnG0HszIle+Eo+xK8zM9NQMFBoB2X3aciAj+Id9I1h//xRpCTVds0zsvbx8KqdF
 cUykR9+i0t009n+3c4ralMdROZeaXOAwttCr7TErikLrsXerDIg=
 =4gzG
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - fix ftrace relocation type filtering

 - relax arch timer version check

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8955/1: virt: Relax arch timer version check during early boot
  ARM: 8950/1: ftrace/recordmcount: filter relocation types
2020-01-25 14:32:51 -08:00
David S. Miller
954b3c4397 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-01-22

The following pull-request contains BPF updates for your *net-next* tree.

We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).

The main changes are:

1) function by function verification and program extensions from Alexei.

2) massive cleanup of selftests/bpf from Toke and Andrii.

3) batched bpf map operations from Brian and Yonghong.

4) tcp congestion control in bpf from Martin.

5) bulking for non-map xdp_redirect form Toke.

6) bpf_send_signal_thread helper from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23 08:10:16 +01:00
Chris Down
2a67a6ccb0 bpf, btf: Always output invariant hit in pahole DWARF to BTF transform
When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this
error:

    % make -s
    Failed to generate BTF for vmlinux
    Try to disable CONFIG_DEBUG_INFO_BTF
    make[3]: *** [vmlinux] Error 1

Compiling again without -s shows the true error (that pahole is
missing), but since this is fatal, we should show the error
unconditionally on stderr as well, not silence it using the `info`
function. With this patch:

    % make -s
    BTF: .tmp_vmlinux.btf: pahole (pahole) is not available
    Failed to generate BTF for vmlinux
    Try to disable CONFIG_DEBUG_INFO_BTF
    make[3]: *** [vmlinux] Error 1

Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name
2020-01-22 17:52:28 +01:00
Masahiro Yamada
3bed1b7b9d kbuild: use -S instead of -E for precise cc-option test in Kconfig
Currently, -E (stop after the preprocessing stage) is used to check
whether the given compiler flag is supported.

While it is faster than -S (or -c), it can be false-positive. You need
to run the compilation proper to check the flag more precisely.

For example, -E and -S disagree about the support of
"--param asan-instrument-allocas=1".

$ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null
$ echo $?
0

$ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null
cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’?
$ echo $?
1

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-22 11:04:28 +09:00
Michał Mirosław
1a7f0a34ea builddeb: allow selection of .deb compressor
Select deb compression using KDEB_COMPRESS make variable. This allows to
use gzip compression for local or test builds, and that's way faster
than now-default xz compression.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-22 00:56:48 +09:00
Alex Sverdlin
927d780ee3 ARM: 8950/1: ftrace/recordmcount: filter relocation types
Scenario 1, ARMv7
=================

If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer
the following may be generated:

00000230 <prealloc_fixed_plts>:
 230:   b5f8            push    {r3, r4, r5, r6, r7, lr}
 232:   b500            push    {lr}
 234:   f7ff fffe       bl      0 <__gnu_mcount_nc>
                        234: R_ARM_THM_CALL     __gnu_mcount_nc
 238:   f240 0600       movw    r6, #0
                        238: R_ARM_THM_MOVW_ABS_NC      __gnu_mcount_nc
 23c:   f8d0 1180       ldr.w   r1, [r0, #384]  ; 0x180

FTRACE currently is not able to deal with it:

WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230()
...
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1
...
[<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14)
[<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8)
[<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90)
[<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c)
[<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230)
[<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444)
[<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8)
[<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358)
[<c0885a67>] (start_kernel) from [<00308095>] (0x308095)
---[ end trace cb88537fdc8fa200 ]---
ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60
 actual: 44:f2:e1:36
ftrace record flags: 0
 (0)   expected tramp: c03143e9

Scenario 2, ARMv4T
==================

ftrace: allocating 14435 entries in 43 pages
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1
Hardware name: Cirrus Logic EDB9302 Evaluation Board
[<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c)
[<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30)
[<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104)
[<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c)
[<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310)
[<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4)
[<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410)
[<c04cef4c>] (start_kernel) from [<00000000>] (  (null))
---[ end trace 0506a2f5dae6b341 ]---
ftrace failed to modify
[<c000c350>] perf_trace_sys_exit+0x5c/0xe8
 actual:   1e:ff:2f:e1
Initializing ftrace call sites
ftrace record flags: 0
 (0)
 expected tramp: c000fb24

The analysis for this problem has been already performed previously,
refer to the link below.

Fix the above problems by allowing only selected reloc types in
__mcount_loc. The list itself comes from the legacy recordmcount.pl
script.

Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/
Cc: stable@vger.kernel.org
Fixes: ed60453fa8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-19 16:08:25 +00:00
Masahiro Yamada
9c9aa8fdf3 kbuild: remove 'Building modules, stage 2.' log
This log is displayed every time modules are built, but it is not
so important.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-16 01:18:35 +09:00
Masahiro Yamada
88fe89a471 kbuild: remove *.tmp file when filechk fails
Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails
due to missing packages, a temporary file is left over, which is not
ignored by git.

For example, if GTK+ is not installed:

  $ make gconfig
  *
  * Unable to find the GTK+ installation. Please make sure that
  * the GTK+ 2.0 development package is correctly installed.
  * You need gtk+-2.0 gmodule-2.0 libglade-2.0
  *
  scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed
  make[1]: *** [scripts/kconfig/gconf-cfg] Error 1
  Makefile:567: recipe for target 'gconfig' failed
  make: *** [gconfig] Error 2
  $ git status
  HEAD detached at v5.4
  Untracked files:
    (use "git add <file>..." to include in what will be committed)

          scripts/kconfig/gconf-cfg.tmp

  nothing added to commit but untracked files present (use "git add" to track)

This is because the check scripts are run with filechk, which misses
to clean up the temporary file on failure.

When the line

  { $(filechk_$(1)); } > $@.tmp;

... fails, it exits immediately due to the 'set -e'. Use trap to make
sure to delete the temporary file on exit.

For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it
a hidden file.

Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-16 00:26:22 +09:00
Masahiro Yamada
5370d4acc5 modpost: assume STT_SPARC_REGISTER is defined
Commit 8d5290149e ("[SPARC]: Deal with glibc changing macro names in
modpost.c") was more than 14 years ago. STT_SPARC_REGISTER is hopefully
defined in elf.h of recent C libraries.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
2020-01-16 00:26:22 +09:00
Catalin Marinas
42d519e3d0 kbuild: Add support for 'as-instr' to be used in Kconfig files
Similar to 'cc-option' or 'ld-option', it is occasionally necessary to
check whether the assembler supports certain ISA extensions. In the
arm64 code we currently do this in Makefile with an additional define:

lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1)

Add the 'as-instr' option so that it can be used in Kconfig directly:

	def_bool $(as-instr,.arch_extension lse)

Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15 12:50:36 +00:00
Andrii Nakryiko
292e1d73b1 libbpf: Clean up bpf_helper_defs.h generation output
bpf_helpers_doc.py script, used to generate bpf_helper_defs.h, unconditionally
emits one informational message to stderr. Remove it and preserve stderr to
contain only relevant errors. Also make sure script invocations command is
muted by default in libbpf's Makefile.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-3-andriin@fb.com
2020-01-13 17:48:13 -08:00