This adds emulation support for the following prefixed Fixed-Point
Arithmetic instructions:
* Prefixed Add Immediate (paddi)
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
[mpe: Squash in get_op() usage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-31-jniethe5@gmail.com
This adds emulation support for the following prefixed integer
load/stores:
* Prefixed Load Byte and Zero (plbz)
* Prefixed Load Halfword and Zero (plhz)
* Prefixed Load Halfword Algebraic (plha)
* Prefixed Load Word and Zero (plwz)
* Prefixed Load Word Algebraic (plwa)
* Prefixed Load Doubleword (pld)
* Prefixed Store Byte (pstb)
* Prefixed Store Halfword (psth)
* Prefixed Store Word (pstw)
* Prefixed Store Doubleword (pstd)
* Prefixed Load Quadword (plq)
* Prefixed Store Quadword (pstq)
the follow prefixed floating-point load/stores:
* Prefixed Load Floating-Point Single (plfs)
* Prefixed Load Floating-Point Double (plfd)
* Prefixed Store Floating-Point Single (pstfs)
* Prefixed Store Floating-Point Double (pstfd)
and for the following prefixed VSX load/stores:
* Prefixed Load VSX Scalar Doubleword (plxsd)
* Prefixed Load VSX Scalar Single-Precision (plxssp)
* Prefixed Load VSX Vector [0|1] (plxv, plxv0, plxv1)
* Prefixed Store VSX Scalar Doubleword (pstxsd)
* Prefixed Store VSX Scalar Single-Precision (pstxssp)
* Prefixed Store VSX Vector [0|1] (pstxv, pstxv0, pstxv1)
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
[mpe: Use CONFIG_PPC64 not __powerpc64__, use get_op()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-30-jniethe5@gmail.com
If a prefixed instruction results in an alignment exception, the
SRR1_PREFIXED bit is set. The handler attempts to emulate the
responsible instruction and then increment the NIP past it. Use
SRR1_PREFIXED to determine by how much the NIP should be incremented.
Prefixed instructions are not permitted to cross 64-byte boundaries. If
they do the alignment interrupt is invoked with SRR1 BOUNDARY bit set.
If this occurs send a SIGBUS to the offending process if in user mode.
If in kernel mode call bad_page_fault().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-29-jniethe5@gmail.com
Do not allow placing xmon breakpoints on the suffix of a prefix
instruction.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Don't split printf strings across lines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-27-jniethe5@gmail.com
Expand the feature-fixups self-tests to includes tests for prefixed
instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Use CONFIG_PPC64 not __powerpc64__, add empty inlines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-26-jniethe5@gmail.com
Expand the code-patching self-tests to includes tests for patching
prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Use CONFIG_PPC64 not __powerpc64__]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-25-jniethe5@gmail.com
For powerpc64, redefine the ppc_inst type so both word and prefixed
instructions can be represented. On powerpc32 the type will remain the
same. Update places which had assumed instructions to be 4 bytes long.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Rework the get_user_inst() macros to be parameterised, and don't
assign to the dest if an error occurred. Use CONFIG_PPC64 not
__powerpc64__ in a few places. Address other comments from
Christophe. Fix some sparse complaints.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com
Currently patch_imm32_load_insns() is used to load an instruction to
r4 to be emulated by emulate_step(). For prefixed instructions we
would like to be able to load a 64bit immediate to r4. To prepare for
this make patch_imm64_load_insns() take an argument that decides which
register to load an immediate to - rather than hardcoding r3.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200516115449.4168796-1-mpe@ellerman.id.au
Add the BOUNDARY SRR1 bit definition for when the cause of an
alignment exception is a prefixed instruction that crosses a 64-byte
boundary. Add the PREFIXED SRR1 bit definition for exceptions caused
by prefixed instructions.
Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it
being used to indicate that an ISI was due to the access being no-exec
or guarded. ISA v3.1 adds another purpose. It is also set if there is
an access in a cache-inhibited location for prefixed instruction.
Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-23-jniethe5@gmail.com
Prefix instructions have their own FSCR bit which needs to enabled via
a CPU feature. The kernel will save the FSCR for problem state but it
needs to be enabled initially.
If prefixed instructions are made unavailable by the [H]FSCR, attempting
to use them will cause a facility unavailable exception. Add "PREFIX" to
the facility_strings[].
Currently there are no prefixed instructions that are actually emulated
by emulate_instruction() within facility_unavailable_exception().
However, when caused by a prefixed instructions the SRR1 PREFIXED bit is
set. Prepare for dealing with emulated prefixed instructions by checking
for this bit.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200506034050.24806-22-jniethe5@gmail.com
test_translate_branch() uses two pointers to instructions within a
buffer, p and q, to test patch_branch(). The pointer arithmetic done on
them assumes a size of 4. This will not work if the instruction length
changes. Instead do the arithmetic relative to the void * to the buffer.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-21-jniethe5@gmail.com
When a new breakpoint is created, the second instruction of that
breakpoint is patched with a trap instruction. This assumes the length
of the instruction is always the same. In preparation for prefixed
instructions, remove this assumption. Insert the trap instruction at the
same time the first instruction is inserted.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-20-jniethe5@gmail.com
Currently in xmon, mread() is used for reading instructions. In
preparation for prefixed instructions, create and use a new function,
mread_instr(), especially for reading instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-19-jniethe5@gmail.com
Currently all instructions have the same length, but in preparation for
prefixed instructions introduce a function for returning instruction
length.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-18-jniethe5@gmail.com
Define specialised get_user_instr(), __get_user_instr() and
__get_user_instr_inatomic() macros for reading instructions from user
and/or kernel space.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Squash in addition of get_user_instr() & __user annotations]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-17-jniethe5@gmail.com
Instead of using memcpy() and flush_icache_range() use
patch_instruction() which not only accomplishes both of these steps but
will also make it easier to add support for prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-16-jniethe5@gmail.com
Introduce a probe_kernel_read_inst() function to use in cases where
probe_kernel_read() is used for getting an instruction. This will be
more useful for prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Don't write to *inst on error]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-15-jniethe5@gmail.com
Introduce a probe_user_read_inst() function to use in cases where
probe_user_read() is used for getting an instruction. This will be
more useful for prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Don't write to *inst on error, fold in __user annotations]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-14-jniethe5@gmail.com
Prefixed instructions will mean there are instructions of different
length. As a result dereferencing a pointer to an instruction will not
necessarily give the desired result. Introduce a function for reading
instructions from memory into the instruction data type.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-13-jniethe5@gmail.com
Currently unsigned ints are used to represent instructions on powerpc.
This has worked well as instructions have always been 4 byte words.
However, ISA v3.1 introduces some changes to instructions that mean
this scheme will no longer work as well. This change is Prefixed
Instructions. A prefixed instruction is made up of a word prefix
followed by a word suffix to make an 8 byte double word instruction.
No matter the endianness of the system the prefix always comes first.
Prefixed instructions are only planned for powerpc64.
Introduce a ppc_inst type to represent both prefixed and word
instructions on powerpc64 while keeping it possible to exclusively
have word instructions on powerpc32.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Fix compile error in emulate_spe()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-12-jniethe5@gmail.com
In preparation for an instruction data type that can not be directly
used with the '==' operator use functions for checking equality.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506034050.24806-11-jniethe5@gmail.com
Use a function for byte swapping instructions in preparation of a more
complicated instruction type.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
Link: https://lore.kernel.org/r/20200506034050.24806-10-jniethe5@gmail.com
In preparation for using a data type for instructions that can not be
directly used with the '>>' operator use a function for getting the op
code of an instruction.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-9-jniethe5@gmail.com
In preparation for introducing a more complicated instruction type to
accommodate prefixed instructions use an accessor for getting an
instruction as a u32.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-8-jniethe5@gmail.com
In preparation for instructions having a more complex data type start
using a macro, ppc_inst(), for making an instruction out of a u32. A
macro is used so that instructions can be used as initializer elements.
Currently this does nothing, but it will allow for creating a data type
that can represent prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Change include guard to _ASM_POWERPC_INST_H]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-7-jniethe5@gmail.com
create_branch(), create_cond_branch() and translate_branch() return the
instruction that they create, or return 0 to signal an error. Separate
these concerns in preparation for an instruction type that is not just
an unsigned int. Fill the created instruction to a pointer passed as
the first parameter to the function and use a non-zero return value to
signify an error.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-6-jniethe5@gmail.com
A modulo operation is used for calculating the current offset from a
breakpoint within the breakpoint table. As instruction lengths are
always a power of 2, this can be replaced with a bitwise 'and'. The
current check for word alignment can be replaced with checking that the
lower 2 bits are not set.
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-5-jniethe5@gmail.com
The instructions for xmon's breakpoint are stored bpt_table[] which is in
the data section. This is problematic as the data section may be marked
as no execute. Move bpt_table[] to the text section.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-4-jniethe5@gmail.com
To execute an instruction out of line after a breakpoint, the NIP is set
to the address of struct bpt::instr. Here a copy of the instruction that
was replaced with a breakpoint is kept, along with a trap so normal flow
can be resumed after XOLing. The struct bpt's are located within the
data section. This is problematic as the data section may be marked as
no execute.
Instead of each struct bpt holding the instructions to be XOL'd, make a
new array, bpt_table[], with enough space to hold instructions for the
number of supported breakpoints. A later patch will move this to the
text section.
Make struct bpt::instr a pointer to the instructions in bpt_table[]
associated with that breakpoint. This association is a simple mapping:
bpts[n] -> bpt_table[n * words per breakpoint]. Currently we only need
the copied instruction followed by a trap, so 2 words per breakpoint.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-3-jniethe5@gmail.com
For modifying instructions in xmon, patch_instruction() can serve the
same role that store_inst() is performing with the advantage of not
being specific to xmon. In some places patch_instruction() is already
being using followed by store_inst(). In these cases just remove the
store_inst(). Otherwise replace store_inst() with patch_instruction().
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20200506034050.24806-2-jniethe5@gmail.com
The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines
are called very late in the shutdown via kexec's mmu_cleanup_all
routine. By the time mmu_cleanup_all runs it is too late to use
udbg_printf, and calling it will cause PS3 systems to hang.
Remove all debugging statements from ps3_mm_region_destroy() and
ps3_mm_vas_destroy() and replace any error reporting with calls
to lv1_panic.
With this change builds with 'DEBUG' defined will not cause kexec
reboots to hang, and builds with 'DEBUG' defined or not will end
in lv1_panic if an error is encountered.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org
System Reset and Machine Check interrupts that are not recoverable due
to being nested or interrupting when RI=0 currently panic. This is not
necessary, and can often just kill the current context and recover.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200508043408.886394-16-npiggin@gmail.com
Similarly to the previous patch, do not trace system reset. This code
is used when there is a crash or hang, and tracing disturbs the system
more and has been known to crash in the crash handling path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-15-npiggin@gmail.com
Rather than notrace annotations throughout a significant part of the
machine check code across kernel/ pseries/ and powernv/ which can
easily be broken and is infrequently tested, use paca->ftrace_enabled
to blanket-disable tracing of the real-mode non-maskable handler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-14-npiggin@gmail.com
machine_check_early() is taken as an NMI, so nmi_enter() is used
there. machine_check_exception() is no longer taken as an NMI (it's
invoked via irq_work in the case a machine check hits in kernel mode),
so remove the nmi_enter() from that case.
In NMI context, hash faults don't try to refill the hash table, which
can lead to crashes accessing non-pinned kernel pages. System reset
still has this potential problem.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Drop change in show_regs() which breaks Book3E]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-12-npiggin@gmail.com
With the previous patch, machine checks can use rtas_call_unlocked()
which avoids the RTAS spinlock which would deadlock if a machine
check hits while making an RTAS call.
This also avoids the complex RTAS error logging which has more RTAS
calls and includes kmalloc (which can return memory beyond RMA, which
would also crash).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-11-npiggin@gmail.com
This allows rtas_args to be put on the machine check stack, which
avoids a lot of complications with re-entrancy deadlocks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-10-npiggin@gmail.com
PAPR does not specify that fwnmi sreset should be interlocked, and
PowerVM (and therefore now QEMU) do not require it.
These "ibm,nmi-interlock" calls are ignored by firmware, but there
is a possibility that the sreset could have interrupted a machine
check and release the machine check's interlock too early, corrupting
it if another machine check came in.
This is an extremely rare case, but it should be fixed for clarity
and reducing the code executed in the sreset path. Firmware also
does not provide error information for the sreset case to look at, so
remove that comment.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use __be64 to silence some sparse warnings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-9-npiggin@gmail.com
If there is some error with the fwnmi save area, r3 has already been
modified which doesn't help with debugging.
Only update r3 when to restore the saved value.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-8-npiggin@gmail.com
This was discovered developing qemu fwnmi sreset support. This
off-by-one bug means the last 16 bytes of the rtas area can not
be used for a 16 byte save area.
It's not a serious bug, and QEMU implementation has to retain a
workaround for old kernels, but it's good to tighten it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com
In the interest of reducing code and possible failures in the
machine check and system reset paths, grab the "ibm,nmi-interlock"
token at init time.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-6-npiggin@gmail.com
