commit d55c3ee6b4 upstream.
Commit a4b83deb3e ("media: videobuf2: rework vb2_mem_ops API")
added a new vb member to struct vb2_dma_sg_buf, but it only added
code setting this to the vb2_dma_sg_alloc() function and not to the
vb2_dma_sg_get_userptr() and vb2_dma_sg_attach_dmabuf() which also
create vb2_dma_sg_buf objects.
This is causing a crash due to a NULL pointer deref when using
libcamera on devices with an Intel IPU3 (qcam app).
Fix these crashes by assigning buf->vb in the other 2 functions too,
note libcamera tests the vb2_dma_sg_get_userptr() path, the change
to the vb2_dma_sg_attach_dmabuf() path is untested.
Fixes: a4b83deb3e ("media: videobuf2: rework vb2_mem_ops API")
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67f85135c5 upstream.
We need to always link allocated vb2_dc_buf back to vb2_buffer because
we dereference vb2 in prepare() and finish() callbacks.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 541ac97186 upstream.
The size of the exception stacks was increased by the commit in Fixes,
resulting in stack sizes greater than a page in size. The #VC exception
handling was only mapping the first (bottom) page, resulting in an
SEV-ES guest failing to boot.
Make the #VC exception stacks part of the default exception stacks
storage and allocate them with a CONFIG_AMD_MEM_ENCRYPT=y .config. Map
them only when a SEV-ES guest has been detected.
Rip out the custom VC stacks mapping and storage code.
[ bp: Steal and adapt Tom's commit message. ]
Fixes: 7fae4c24a2 ("x86: Increase exception stack sizes")
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lkml.kernel.org/r/YVt1IMjIs7pIZTRR@zn.tnic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa5a461171 upstream.
Introduce an x86 version of the cc_platform_has() function. This will be
used to replace vendor specific calls like sme_active(), sev_active(),
etc.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46b49b12f3 upstream.
In preparation for other confidential computing technologies, introduce
a generic helper function, cc_platform_has(), that can be used to
check for specific active confidential computing attributes, like
memory encryption. This is intended to eliminate having to add multiple
technology-specific checks to the code (e.g. if (sev_active() ||
tdx_active() || ... ).
[ bp: s/_CC_PLATFORM_H/_LINUX_CC_PLATFORM_H/g ]
Co-developed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a20eac0af0 upstream.
Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.
Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.
Fixes: 0133c20480 ("selftests/bpf: Fix strobemeta selftest regression")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a72fdfd21e upstream.
Commit in Fixes changed the iopl emulation to not #GP on CLI and STI
because it would break some insane luserspace tools which would toggle
interrupts.
The corresponding selftest would rely on the fact that executing CLI/STI
would trigger a #GP and thus detect it this way but since that #GP is
not happening anymore, the detection is now wrong too.
Extend the test to actually look at the IF flag and whether executing
those insns had any effect on it. The STI detection needs to have the
fact that interrupts were previously disabled, passed in so do that from
the previous CLI test, i.e., STI test needs to follow a previous CLI one
for it to make sense.
Fixes: b968e84b50 ("x86/iopl: Fake iopl(3) CLI/STI usage")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211030083939.13073-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0eab756f88 upstream.
There are several error return paths that dereference the null pointer
host because the pointer has not yet been set to a valid value.
Fix this by adding a new out_mmc label and exiting via this label
to avoid the host clean up and hence the null pointer dereference.
Addresses-Coverity: ("Explicit null dereference")
Fixes: 8105c2abbf ("mmc: moxart: Fix reference count leaks in moxart_probe")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20211013100052.125461-1-colin.king@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 937e79c677 upstream.
Using a kernel pointer in place of a dma_addr_t token can
lead to undefined behavior if that makes it into cache
management functions. The compiler caught one such attempt
in a cast:
drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_add_interface':
drivers/net/wireless/ath/ath10k/mac.c:5586:47: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
5586 | arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
| ^
Looking through how this gets used down the way, I'm fairly
sure that beacon_paddr is never accessed again for ATH10K_DEV_TYPE_HL
devices, and if it was accessed, that would be a bug.
Change the assignment to use a known-invalid address token
instead, which avoids the warning and makes it easier to catch
bugs if it does end up getting used.
Fixes: e263bdab9c ("ath10k: high latency fixes for beacon buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211014075153.3655910-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 112024a3b6 upstream.
Adding kfree(dvb) to vidtv_bridge_remove() will remove the memory
too soon: if an application still has an open filehandle to the device
when the driver is unloaded, then when that filehandle is closed, a
use-after-free access takes place to the freed memory.
Move the kfree(dvb) to vidtv_bridge_dev_release() instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 76e21bb8be ("media: vidtv: Fix memory leak in remove")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91adec9e07 upstream.
commit 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21
asics") switched over to using dmub on Renoir to fix Gitlab 1735, but this
implied a new dependency on newer firmware which might not be met on older
kernel versions.
Since sw_init runs before hw_init, there is an opportunity to determine
whether or not the firmware version is new to adjust the behavior.
Cc: Roman.Li@amd.com
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1772
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1735
Fixes: 652de07add ("drm/amd/display: Fully switch to dmub for all dcn21 asics")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea7a1019d8 upstream.
The premise of commit 6f9f17287e ("SUNRPC: Mitigate cond_resched() in
xprt_transmit()") was that cond_resched() is expensive and unnecessary
when there has been just a single send.
The point of cond_resched() is to ensure that tasks that should pre-empt
this one get a chance to do so when it is safe to do so. The code prior
to commit 6f9f17287e failed to take into account that it was keeping a
rpc_task pinned for longer than it needed to, and so rather than doing a
full revert, let's just move the cond_resched.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4e17d65da upstream.
Change PCIe Max Payload Size setting in PCIe Device Control register to 512
bytes to align with PCIe Link Initialization sequence as defined in Marvell
Armada 3700 Functional Specification. According to the specification,
maximal Max Payload Size supported by this device is 512 bytes.
Without this kernel prints suspicious line:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 16384, max 512)
With this change it changes to:
pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 256 (was 512, max 512)
Link: https://lore.kernel.org/r/20211005180952.6812-3-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 460275f124 upstream.
Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload
Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*.
Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c302c98da6 upstream.
Macros SUN8I_CSC_CTRL() and SUN8I_CSC_COEFF() don't follow usual
recommendation of having arguments enclosed in parenthesis. While that
didn't change anything for quite sometime, it actually become important
after CSC code rework with commit ea067aee45 ("drm/sun4i: de2/de3:
Remove redundant CSC matrices").
Without this fix, colours are completely off for supported YVU formats
on SoCs with DE2 (A64, H3, R40, etc.).
Fix the issue by enclosing macro arguments in parenthesis.
Cc: stable@vger.kernel.org # 5.12+
Fixes: 8830293905 ("drm/sun4i: Add DE2 CSC library")
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831184819.93670-1-jernej.skrabec@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c45361abb9 upstream.
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 319fa1a52e upstream.
On VMs with NX encryption, compression, and/or RNG offload, these
capabilities are described by nodes in the ibm,platform-facilities device
tree hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
├── ibm,compression-v1
├── ibm,random-v1
└── ibm,sym-encryption-v1
3 directories
The acceleration functions that these nodes describe are not disrupted by
live migration, not even temporarily.
But the post-migration ibm,update-nodes sequence firmware always sends
"delete" messages for this hierarchy, followed by an "add" directive to
reconstruct it via ibm,configure-connector (log with debugging statements
enabled in mobility.c):
mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285
mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284
mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283
mobility: removing node /ibm,platform-facilities:4294967286
...
mobility: added node /ibm,platform-facilities:4294967286
Note we receive a single "add" message for the entire hierarchy, and what
we receive from the ibm,configure-connector sequence is the top-level
platform-facilities node along with its three children. The debug message
simply reports the parent node and not the whole subtree.
Also, significantly, the nodes added are almost completely equivalent to
the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in
the leaf nodes is the only property I've observed to differ, and Linux does
not use that. So in practice, the sum of update messages Linux receives for
this hierarchy is equivalent to minor property updates.
We succeed in removing the original hierarchy from the device tree. But the
vio bus code is ignorant of this, and does not unbind or relinquish its
references. The leaf nodes, still reachable through sysfs, of course still
refer to the now-freed ibm,platform-facilities parent node, which makes
use-after-free possible:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0
refcount_warn_saturate+0x160/0x1f0 (unreliable)
kobject_get+0xf0/0x100
of_node_get+0x30/0x50
of_get_parent+0x50/0xb0
of_fwnode_get_parent+0x54/0x90
fwnode_count_parents+0x50/0x150
fwnode_full_name_string+0x30/0x110
device_node_string+0x49c/0x790
vsnprintf+0x1c0/0x4c0
sprintf+0x44/0x60
devspec_show+0x34/0x50
dev_attr_show+0x40/0xa0
sysfs_kf_seq_show+0xbc/0x200
kernfs_seq_show+0x44/0x60
seq_read_iter+0x2a4/0x740
kernfs_fop_read_iter+0x254/0x2e0
new_sync_read+0x120/0x190
vfs_read+0x1d0/0x240
Moreover, the "new" replacement subtree is not correctly added to the
device tree, resulting in ibm,platform-facilities parent node without the
appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy:
$ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/
/sys/firmware/devicetree/base/ibm,platform-facilities/
0 directories
$ cd /sys/devices/vio ; find . -xtype l -exec file {} +
./ibm,sym-encryption-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1
./ibm,random-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1
./ibm,compression-v1/of_node: broken symbolic link to
../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1
This is because add_dt_node() -> dlpar_attach_node() attaches only the
parent node returned from configure-connector, ignoring any children. This
should be corrected for the general case, but fixing that won't help with
the stale OF node references, which is the more urgent problem.
One way to address that would be to make the drivers respond to node
removal notifications, so that node references can be dropped
appropriately. But this would likely force the drivers to disrupt active
clients for no useful purpose: equivalent nodes are immediately re-added.
And recall that the acceleration capabilities described by the nodes remain
available throughout the whole process.
The solution I believe to be robust for this situation is to convert
remove+add of a node with an unchanged phandle to an update of the node's
properties in the Linux device tree structure. That would involve changing
and adding a fair amount of code, and may take several iterations to land.
Until that can be realized we have a confirmed use-after-free and the
possibility of memory corruption. So add a limited workaround that
discriminates on the node type, ignoring adds and removes. This should be
amenable to backporting in the meantime.
Fixes: 410bccf978 ("powerpc/pseries: Partition migration in the kernel")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a5cb51f3d upstream.
The check_return_regs_valid() can cause a false positive if the return
regs are marked as norestart and they are an HSRR type interrupt,
because the low bit in the bottom of regs->trap causes interrupt type
matching to fail.
This can occcur for example on bare metal with a HV privileged doorbell
interrupt that causes a signal, but do_signal returns early because
get_signal() fails, and takes the "No signal to deliver" path. In this
case no signal was delivered so the return location is not changed so
return SRRs are not invalidated, yet set_trap_norestart is called, which
messes up the match. Building go-1.16.6 is known to reproduce this.
Fix it by using the TRAP() accessor which masks out the low bit.
Fixes: 6eaaf9de35 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c12b4df8d upstream.
The mitigation-patching.sh script in the powerpc selftests toggles
all mitigations on and off simultaneously, revealing that rfi_flush
and stf_barrier cannot safely operate at the same time due to races
in updating the static key.
On some systems, the static key code throws a warning and the kernel
remains functional. On others, the kernel will hang or crash.
Fix this by slapping on a mutex.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211027072410.40950-1-ruscur@russell.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81291383ff upstream.
A e5500 machine running a 32-bit kernel sometimes hangs at boot,
seemingly going into an infinite loop of instruction storage interrupts.
The ESR (Exception Syndrome Register) has a value of 0x800000 (store)
when this happens, which is likely set by a previous store. An
instruction TLB miss interrupt would then leave ESR unchanged, and if no
PTE exists it calls directly to the instruction storage interrupt
handler without changing ESR.
access_error() does not cause a segfault due to a store to a read-only
vma because is_exec is true. Most subsequent fault handling does not
check for a write fault on a read-only vma, and might do strange things
like create a writeable PTE or call page_mkwrite on a read only vma or
file. It's not clear what happens here to cause the infinite faulting in
this case, a fault handler failure or low level PTE or TLB handling.
In any case this can be fixed by having the instruction storage
interrupt zero regs->dsisr rather than storing the ESR value to it.
Fixes: a01a3f2ddb ("powerpc: remove arguments from fault handler functions")
Cc: stable@vger.kernel.org # v5.12+
Reported-by: Jacques de Laval <jacques.delaval@protonmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Jacques de Laval <jacques.delaval@protonmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211028133043.4159501-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44a8214de9 upstream.
Running program with bpf-to-bpf function calls results in data access
exception (0x300) with the below call trace:
bpf_int_jit_compile+0x238/0x750 (unreliable)
bpf_check+0x2008/0x2710
bpf_prog_load+0xb00/0x13a0
__sys_bpf+0x6f4/0x27c0
sys_bpf+0x2c/0x40
system_call_exception+0x164/0x330
system_call_vectored_common+0xe8/0x278
as bpf_int_jit_compile() tries writing to write protected JIT code
location during the extra pass.
Fix it by holding off write protection of JIT code until the extra
pass, where branch target addresses fixup happens.
Fixes: 62e3d4210a ("powerpc/bpf: Write protect JIT code")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025055649.114728-1-hbathini@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61cb9ac66b upstream.
(!ptr && !ptr->foo) strikes again. :)
The expression (!ptr && !ptr->foo) is bogus and in case ptr is NULL,
it leads to a NULL pointer dereference: ptr->foo.
Fix this by converting && to ||
This issue was detected with the help of Coccinelle, and audited and
fixed manually.
Fixes: 1a0d0d5ed5 ("powerpc/vas: Add platform specific user window operations")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015050345.GA1161918@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e3cdba176 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: dbffc8ccdf ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 325fd539fc upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 612e048e6a ("mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-8-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 194ac63de6 upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 553508cec2 ("mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-6-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f16b7d2a5e upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 8fc6f1f042 ("mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-7-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5b5b4dc6f upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: f6341f6448 ("mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9d8570b7f upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 6dd09f775b ("mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-5-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bcd2960af upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: d525914b5b ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Cc: Jan Hoffmann <jan@3e8.eu>
Cc: Kestrel seventyfour <kestrelseventyfour@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Jan Hoffmann <jan@3e8.eu>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-10-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d707bb74da upstream.
Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.
It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.
There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)
As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.
Fixes: 59d9347332 ("mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928222258.199726-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9be1446ece upstream.
The introduction of the generic ECC engine API lead to a number of
changes in various drivers which broke some of them. Here is a typical
example: I expected the SM_ORDER option to be handled by the Hamming ECC
engine internals. Problem: the fsmc driver does not instantiate (yet) a
real ECC engine object so we had to use a 'bare' ECC helper instead of
the shiny rawnand functions. However, when not intializing this engine
properly and using the bare helpers, we do not get the SM ORDER feature
handled automatically. It looks like this was lost in the process so
let's ensure we use the right SM ORDER now.
Fixes: ad9ffdce45 ("mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210928221507.199198-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e90547d59d upstream.
Usually the dash '-' is preferred in node name.
So far, not dts in upstream kernel, so we just update node name
in driver.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 5e4c124307 ("remoteproc: imx_rproc: support remote cores booted before Linux Kernel")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-6-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afe670e23a upstream.
vdev regions are typically named vdev0buffer, vdev0ring0, vdev0ring1 and
etc. Change to strncmp to cover them all.
Fixes: 8f2d896164 ("remoteproc: imx_rproc: ignore mapping vdev regions")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-5-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 970675f61b upstream.
Currently the is_iomem is a random value in the stack which may
be default to true even on those platforms that not use iomem to
store firmware.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 40df0a91b2 ("remoteproc: add is_iomem to da_to_va")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad9a145172 upstream.
Since commit 48720ba568 ("virtio/s390: use DMA memory for ccw I/O and
classic notifiers") we were supposed to make sure that
virtio_ccw_release_dev() completes before the ccw device and the
attached dma pool are torn down, but unfortunately we did not. Before
that commit it used to be OK to delay cleaning up the memory allocated
by virtio-ccw indefinitely (which isn't really intuitive for guys used
to destruction happens in reverse construction order), but now we
trigger a BUG_ON if the genpool is destroyed before all memory allocated
from it is deallocated. Which brings down the guest. We can observe this
problem, when unregister_virtio_device() does not give up the last
reference to the virtio_device (e.g. because a virtio-scsi attached scsi
disk got removed without previously unmounting its previously mounted
partition).
To make sure that the genpool is only destroyed after all the necessary
freeing is done let us take a reference on the ccw device on each
ccw_device_dma_zalloc() and give it up on each ccw_device_dma_free().
Actually there are multiple approaches to fixing the problem at hand
that can work. The upside of this one is that it is the safest one while
remaining simple. We don't crash the guest even if the driver does not
pair allocations and frees. The downside is the reference counting
overhead, that the reference counting for ccw devices becomes more
complex, in a sense that we need to pair the calls to the aforementioned
functions for it to be correct, and that if we happen to leak, we leak
more than necessary (the whole ccw device instead of just the genpool).
Some alternatives to this approach are taking a reference in
virtio_ccw_online() and giving it up in virtio_ccw_release_dev() or
making sure virtio_ccw_release_dev() completes its work before
virtio_ccw_remove() returns. The downside of these approaches is that
these are less safe against programming errors.
Cc: <stable@vger.kernel.org> # v5.3
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48720ba568 ("virtio/s390: use DMA memory for ccw I/O and classic notifiers")
Reported-by: bfu@redhat.com
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3826350e6d upstream.
When a queue is switched to soft offline during heavy load and later
switched to soft online again and now used, it may be that the caller
is blocked forever in the ioctl call.
The failure occurs because there is a pending reply after the queue(s)
have been switched to offline. This orphaned reply is received when
the queue is switched to online and is accidentally counted for the
outstanding replies. So when there was a valid outstanding reply and
this orphaned reply is received it counts as the outstanding one thus
dropping the outstanding counter to 0. Voila, with this counter the
receive function is not called any more and the real outstanding reply
is never received (until another request comes in...) and the ioctl
blocks.
The fix is simple. However, instead of readjusting the counter when an
orphaned reply is detected, I check the queue status for not empty and
compare this to the outstanding counter. So if the queue is not empty
then the counter must not drop to 0 but at least have a value of 1.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 213fca9e23 upstream.
commit 9c6c273aa4 ("timer: Remove init_timer_on_stack() in favor
of timer_setup_on_stack()") changed the timer setup from
init_timer_on_stack(() to timer_setup(), but missed to change the
mod_timer() call. And while at it, use msecs_to_jiffies() instead
of the open coded timeout calculation.
Cc: stable@vger.kernel.org
Fixes: 9c6c273aa4 ("timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack()")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d48c7afed upstream.
When a CPU is hotplugged while the perf stat -e cycles command is
running, a wrong (very large) value is displayed immediately after the
CPU removal:
Check the values, shouldn't be too high as in
time counts unit events
1.001101919 29261846 cycles
2.002454499 17523405 cycles
3.003659292 24361161 cycles
4.004816983 18446744073638406144 cycles
5.005671647 <not counted> cycles
...
The CPU hotplug off took place after 3 seconds.
The issue is the read of the event count value after 4 seconds when
the CPU is not available and the read of the counter returns an
error. This is treated as a counter value of zero. This results
in a very large value (0 - previous_value).
Fix this by detecting the hotplugged off CPU and report 0 instead
of a very large number.
Cc: stable@vger.kernel.org
Fixes: a029a4eab3 ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2878feaed5 upstream.
This reverts commit 2fd3e5efe7.
The above commit replaces page_address(bv->bv_page) by bvec_virt(bv) to
avoid directly access to bv->bv_page, but in situation bv->bv_offset is
not zero and page_address(bv->bv_page) is not equal to bvec_virt(bv). In
such case a memory corruption may happen because memory in next page is
tainted by following line in do_btree_node_write(),
memcpy(bvec_virt(bv), addr, PAGE_SIZE);
This patch reverts the mentioned commit to avoid the memory corruption.
Fixes: 2fd3e5efe7 ("bcache: use bvec_virt")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211103151041.70516-1-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8468f45091 upstream.
In bcache_device_free(), pointer disk is referenced still in
ida_simple_remove() after blk_cleanup_disk() gets called on this
pointer. This may cause a potential panic by use-after-free on the
disk pointer.
This patch fixes the problem by calling blk_cleanup_disk() after
ida_simple_remove().
Fixes: bc70852fd1 ("bcache: convert to blk_alloc_disk/blk_cleanup_disk")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: stable@vger.kernel.org # v5.14+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211103064917.67383-1-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33a5471f8d upstream.
The note in c2adda27d2 ("video: backlight: Add of_find_backlight helper
in backlight.c") says that gpio-backlight uses brightness as power state.
This has been fixed since in ec665b756e ("backlight: gpio-backlight:
Correct initial power state handling") and other backlight drivers do not
require this workaround. Drop the workaround.
This fixes the case where e.g. pwm-backlight can perfectly well be set to
brightness 0 on boot in DT, which without this patch leads to the display
brightness to be max instead of off.
Fixes: c2adda27d2 ("video: backlight: Add of_find_backlight helper in backlight.c")
Cc: <stable@vger.kernel.org> # 5.4+
Cc: <stable@vger.kernel.org> # 4.19.x: ec665b756e: backlight: gpio-backlight: Correct initial power state handling
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 313c84b5ae upstream.
This patch extends the DLN2 driver; adding cell for adc_dln2 module.
The original patch[1] fell through the cracks when the driver was added
so ADC has never actually been usable. That patch did not have ACPI
support which was added in v5.9, so the oldest supported version this
current patch can be backported to is 5.10.
[1] https://www.spinics.net/lists/linux-iio/msg33975.html
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Jack Andersen <jackoalan@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211018112541.25466-1-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8468e937df upstream.
When truncating pagecache on file THP, the private pages of a process
should not be unmapped mapping. This incorrect behavior on a dynamic
shared libraries which will cause related processes to happen core dump.
A simple test for a DSO (Prerequisite is the DSO mapped in file THP):
int main(int argc, char *argv[])
{
int fd;
fd = open(argv[1], O_WRONLY);
if (fd < 0) {
perror("open");
}
close(fd);
return 0;
}
The test only to open a target DSO, and do nothing. But this operation
will lead one or more process to happen core dump. This patch mainly to
fix this bug.
Link: https://lkml.kernel.org/r/20211025092134.18562-3-rongwei.wang@linux.alibaba.com
Fixes: eb6ecbed0a ("mm, thp: relax the VM_DENYWRITE constraint on file-backed THPs")
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Tested-by: Xu Yu <xuyu@linux.alibaba.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Collin Fijalkovich <cfijalkovich@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
