On 64-bit architectures we have two 4-byte holes in struct ext4_io_end.
Order entries better to avoid this and thus make the structure occupy
64 instead of 72 bytes for 64-bit architectures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we used atomic bit operations to manipulate
__JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are
always written and read under j_list_lock. So just change the operations
to standard bit operations.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Revoke and tag descriptor blocks are just different kinds of descriptor
blocks and thus have checksum in the same place. Unify computation and
checking of checksums for these.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Descriptor block header is initialized in several places. Factor out the
common code into jbd2_journal_get_descriptor_buffer().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_journal_write_revoke_records() takes journal pointer and write_op,
although journal can be obtained from the passed transaction and
write_op is always WRITE_SYNC. Remove these superfluous arguments.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To reduce amount of damage caused by single bad block, we limit number
of inodes sharing an xattr block to 1024. Thus there can be more xattr
blocks with the same contents when there are lots of files with the same
extended attributes. These xattr blocks naturally result in hash
collisions and can form long hash chains and we unnecessarily check each
such block only to find out we cannot use it because it is already
shared by too many inodes.
Add a reusable flag to cache entries which is cleared when a cache entry
has reached its maximum refcount. Cache entries which are not marked
reusable are skipped by mb_cache_entry_find_{first,next}. This
significantly speeds up mbcache when there are many same xattr blocks.
For example for xattr-bench with 5 values and each process handling
20000 files, the run for 64 processes is 25x faster with this patch.
Even for 8 processes the speedup is almost 3x. We have also verified
that for situations where there is only one xattr block of each kind,
the patch doesn't have a measurable cost.
[JK: Remove handling of setting the same value since it is not needed
anymore, check for races in e_reusable setting, improve changelog,
add measurements]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When someone tried to set xattr to the same value (i.e., not changing
anything) we did all the work of removing original xattr, possibly
breaking references to shared xattr block, inserting new xattr, and
merging xattr blocks again. Since this is not so rare operation and it
is relatively cheap for us to detect this case, check for this and
shortcut xattr setting in that case.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Get rid of field _e_hash_list_head in cache entries and add bit field
e_referenced instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This variable, introduced in commit 9c191f70, is unnecessary: it is set
once the module has been initialized correctly, and ext4_fill_super
cannot run unless the module has been initialized correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since old mbcache code is gone, let's rename new code to mbcache since
number 2 is now meaningless. This is just a mechanical replacement.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we maintain perfect LRU list by moving entry to the tail of
the list when it gets used. However these operations on cache-global
list are relatively expensive.
In this patch we switch to lazy updates of LRU list. Whenever entry gets
used, we set a referenced bit in it. When reclaiming entries, we give
referenced entries another round in the LRU. Since the list is not a
real LRU anymore, rename it to just 'list'.
In my testing this logic gives about 30% boost to workloads with mostly
unique xattr blocks (e.g. xattr-bench with 10 files and 10000 unique
xattr values).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
So far number of entries in mbcache is limited only by the pressure from
the shrinker. Since too many entries degrade the hash table and
generally we expect that caching more entries has diminishing returns,
limit number of entries the same way as in the old mbcache to 16 * hash
table size.
Once we exceed the desired maximum number of entries, we schedule a
backround work to reclaim entries. If the background work cannot keep up
and the number of entries exceeds two times the desired maximum, we
reclaim some entries directly when allocating a new entry.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Both ext2 and ext4 are now converted to mbcache2. Remove the old mbcache
code.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The conversion is generally straightforward. We convert filesystem from
a global cache to per-fs one. Similarly to ext4 the tricky part is that
xattr block corresponding to found mbcache entry can get freed before we
get buffer lock for that block. So we have to check whether the entry is
still valid after getting the buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The conversion is generally straightforward. The only tricky part is
that xattr block corresponding to found mbcache entry can get freed
before we get buffer lock for that block. So we have to check whether
the entry is still valid after getting buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Original mbcache was designed to have more features than what ext?
filesystems ended up using. It supported entry being in more hashes, it
had a home-grown rwlocking of each entry, and one cache could cache
entries from multiple filesystems. This genericity also resulted in more
complex locking, larger cache entries, and generally more code
complexity.
This is reimplementation of the mbcache functionality to exactly fit the
purpose ext? filesystems use it for. Cache entries are now considerably
smaller (7 instead of 13 longs), the code is considerably smaller as
well (414 vs 913 lines of code), and IMO also simpler. The new code is
also much more lightweight.
I have measured the speed using artificial xattr-bench benchmark, which
spawns P processes, each process sets xattr for F different files, and
the value of xattr is randomly chosen from a pool of V values. Averages
of runtimes for 5 runs for various combinations of parameters are below.
The first value in each cell is old mbache, the second value is the new
mbcache.
V=10
F\P 1 2 4 8 16 32 64
10 0.158,0.157 0.208,0.196 0.500,0.277 0.798,0.400 3.258,0.584 13.807,1.047 61.339,2.803
100 0.172,0.167 0.279,0.222 0.520,0.275 0.825,0.341 2.981,0.505 12.022,1.202 44.641,2.943
1000 0.185,0.174 0.297,0.239 0.445,0.283 0.767,0.340 2.329,0.480 6.342,1.198 16.440,3.888
V=100
F\P 1 2 4 8 16 32 64
10 0.162,0.153 0.200,0.186 0.362,0.257 0.671,0.496 1.433,0.943 3.801,1.345 7.938,2.501
100 0.153,0.160 0.221,0.199 0.404,0.264 0.945,0.379 1.556,0.485 3.761,1.156 7.901,2.484
1000 0.215,0.191 0.303,0.246 0.471,0.288 0.960,0.347 1.647,0.479 3.916,1.176 8.058,3.160
V=1000
F\P 1 2 4 8 16 32 64
10 0.151,0.129 0.210,0.163 0.326,0.245 0.685,0.521 1.284,0.859 3.087,2.251 6.451,4.801
100 0.154,0.153 0.211,0.191 0.276,0.282 0.687,0.506 1.202,0.877 3.259,1.954 8.738,2.887
1000 0.145,0.179 0.202,0.222 0.449,0.319 0.899,0.333 1.577,0.524 4.221,1.240 9.782,3.579
V=10000
F\P 1 2 4 8 16 32 64
10 0.161,0.154 0.198,0.190 0.296,0.256 0.662,0.480 1.192,0.818 2.989,2.200 6.362,4.746
100 0.176,0.174 0.236,0.203 0.326,0.255 0.696,0.511 1.183,0.855 4.205,3.444 19.510,17.760
1000 0.199,0.183 0.240,0.227 1.159,1.014 2.286,2.154 6.023,6.039 ---,10.933 ---,36.620
V=100000
F\P 1 2 4 8 16 32 64
10 0.171,0.162 0.204,0.198 0.285,0.230 0.692,0.500 1.225,0.881 2.990,2.243 6.379,4.771
100 0.151,0.171 0.220,0.210 0.295,0.255 0.720,0.518 1.226,0.844 3.423,2.831 19.234,17.544
1000 0.192,0.189 0.249,0.225 1.162,1.043 2.257,2.093 5.853,4.997 ---,10.399 ---,32.198
We see that the new code is faster in pretty much all the cases and
starting from 4 processes there are significant gains with the new code
resulting in upto 20-times shorter runtimes. Also for large numbers of
cached entries all values for the old code could not be measured as the
kernel started hitting softlockups and died before the test completed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit bcff24887d ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.
Fixes: bcff24887d ("ext4: don't read blocks from disk after extentsbeing swapped")
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Now, ext4_free_blocks() doesn't revoke data blocks of per-file data
journalled inode and it can cause file data inconsistency problems.
Even though data blocks of per-file data journalled inode are already
forgotten by jbd2_journal_invalidatepage() in advance of invoking
ext4_free_blocks(), we still need to revoke the data blocks here.
Moreover some of the metadata blocks, which are not found by
sb_find_get_block(), are still needed to be revoked, but this is also
missing here.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Competing overwrite DIO in dioread_nolock mode will just overwrite
pointer to io_end in the inode. This may result in data corruption or
extent conversion happening from IO completion interrupt because we
don't properly set buffer_defer_completion() when unlocked DIO races
with locked DIO to unwritten extent.
Since unlocked DIO doesn't need io_end for anything, just avoid
allocating it and corrupting pointer from inode for locked DIO.
A cleaner fix would be to avoid these games with io_end pointer from the
inode but that requires more intrusive changes so we leave that for
later.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 can update bh->b_state non-atomically in _ext4_get_block() and
ext4_da_get_block_prep(). Usually this is fine since bh is just a
temporary storage for mapping information on stack but in some cases it
can be fully living bh attached to a page. In such case non-atomic
update of bh->b_state can race with an atomic update which then gets
lost. Usually when we are mapping bh and thus updating bh->b_state
non-atomically, nobody else touches the bh and so things work out fine
but there is one case to especially worry about: ext4_finish_bio() uses
BH_Uptodate_Lock on the first bh in the page to synchronize handling of
PageWriteback state. So when blocksize < pagesize, we can be atomically
modifying bh->b_state of a buffer that actually isn't under IO and thus
can race e.g. with delalloc trying to map that buffer. The result is
that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the
corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock.
Fix the problem by always updating bh->b_state bits atomically.
CC: stable@vger.kernel.org
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "newblock" parameter is not used in convert_initialized_extent(),
remove it.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I notice ext4/307 fails occasionally on ppc64 host, reporting md5
checksum mismatch after moving data from original file to donor file.
The reason is that move_extent_per_page() calls __block_write_begin()
and block_commit_write() to write saved data from original inode blocks
to donor inode blocks, but __block_write_begin() not only maps buffer
heads but also reads block content from disk if the size is not block
size aligned. At this time the physical block number in mapped buffer
head is pointing to the donor file not the original file, and that
results in reading wrong data to page, which get written to disk in
following block_commit_write call.
This also can be reproduced by the following script on 1k block size ext4
on x86_64 host:
mnt=/mnt/ext4
donorfile=$mnt/donor
testfile=$mnt/testfile
e4compact=~/xfstests/src/e4compact
rm -f $donorfile $testfile
# reserve space for donor file, written by 0xaa and sync to disk to
# avoid EBUSY on EXT4_IOC_MOVE_EXT
xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile
# create test file written by 0xbb
xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile
# compute initial md5sum
md5sum $testfile | tee md5sum.txt
# drop cache, force e4compact to read data from disk
echo 3 > /proc/sys/vm/drop_caches
# test defrag
echo "$testfile" | $e4compact -i -v -f $donorfile
# check md5sum
md5sum -c md5sum.txt
Fix it by creating & mapping buffer heads only but not reading blocks
from disk, because all the data in page is guaranteed to be up-to-date
in mext_page_mkuptodate().
Cc: stable@vger.kernel.org
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds a line break for proc mb_groups display.
Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
The ext4_ioctl_setflags() function which is used in the ioctls
EXT4_IOC_SETFLAGS and EXT4_IOC_FSSETXATTR may return the positive value
EPERM instead of -EPERM in case of error. This bug was introduced by a
recent commit 9b7365fc.
The following program can be used to illustrate the wrong behavior:
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <err.h>
#define FS_IOC_GETFLAGS _IOR('f', 1, long)
#define FS_IOC_SETFLAGS _IOW('f', 2, long)
#define FS_IMMUTABLE_FL 0x00000010
int main(void)
{
int fd;
long flags;
fd = open("file", O_RDWR|O_CREAT, 0600);
if (fd < 0)
err(1, "open");
if (ioctl(fd, FS_IOC_GETFLAGS, &flags) < 0)
err(1, "ioctl: FS_IOC_GETFLAGS");
flags |= FS_IMMUTABLE_FL;
if (ioctl(fd, FS_IOC_SETFLAGS, &flags) < 0)
err(1, "ioctl: FS_IOC_SETFLAGS");
warnx("ioctl returned no error");
return 0;
}
Running it gives the following result:
$ strace -e ioctl ./test
ioctl(3, FS_IOC_GETFLAGS, 0x7ffdbd8bfd38) = 0
ioctl(3, FS_IOC_SETFLAGS, 0x7ffdbd8bfd38) = 1
test: ioctl returned no error
+++ exited with 0 +++
Running the program on a kernel with the bug fixed gives the proper result:
$ strace -e ioctl ./test
ioctl(3, FS_IOC_GETFLAGS, 0x7ffdd2768258) = 0
ioctl(3, FS_IOC_SETFLAGS, 0x7ffdd2768258) = -1 EPERM (Operation not permitted)
test: ioctl: FS_IOC_SETFLAGS: Operation not permitted
+++ exited with 1 +++
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When block group checksum is wrong, we call ext4_error() while holding
group spinlock from ext4_init_block_bitmap() or
ext4_init_inode_bitmap() which results in scheduling while in atomic.
Fix the issue by calling ext4_error() later after dropping the spinlock.
CC: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
In the case where the per-file key for the directory is cached, but
root does not have access to the key needed to derive the per-file key
for the files in the directory, we allow the lookup to succeed, so
that lstat(2) and unlink(2) can suceed. However, if a program tries
to open the file, it will get an ENOKEY error.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add a validation check for dentries for encrypted directory to make
sure we're not caching stale data after a key has been added or removed.
Also check to make sure that status of the encryption key is updated
when readdir(2) is executed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Here are some small USB fixes and new device ids for 4.5-rc2. Nothing
major here, full details are in the shortlog, and all of these have been
in linux-next successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlauV48ACgkQMUfUDdst+ynoAgCgn5XyA+Nhizh74VUCK953YzQf
gg8AoMyIn9vglivzcWAOCbmz2T9UO5P4
=HoFp
-----END PGP SIGNATURE-----
Merge tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.5-rc2. Nothing
major here, full details are in the shortlog, and all of these have
been in linux-next successfully"
* tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: option: fix Cinterion AHxx enumeration
USB: mxu11x0: fix memory leak on usb_serial private data
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
USB: serial: option: Adding support for Telit LE922
USB: serial: visor: fix crash on detecting device without write_urbs
USB: visor: fix null-deref at probe
USB: cp210x: add ID for IAI USB to RS485 adaptor
usb: hub: do not clear BOS field during reset device
cdc-acm:exclude Samsung phone 04e8:685d
usb: cdc-acm: send zero packet for intel 7260 modem
usb: cdc-acm: handle unlinked urb in acm read callback
Here are some small tty/serial driver fixes for 4.5-rc2.
They resolve a number of reported problems (the ioctl one specifically
has been pointed out by numerous people) and one patch adds some new
device ids for the 8250_pci driver. All have been in linux-next
successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlauWWkACgkQMUfUDdst+ykujQCfUSpPMRs3yagM24SI8ITnbEJQ
7H0An0utvQBUhgf10WA7trJ+uyzq4SsQ
=uUEE
-----END PGP SIGNATURE-----
Merge tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 4.5-rc2.
They resolve a number of reported problems (the ioctl one specifically
has been pointed out by numerous people) and one patch adds some new
device ids for the 8250_pci driver. All have been in linux-next
successfully"
* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Add Intel Broadwell ports
staging/speakup: Use tty_ldisc_ref() for paste kworker
n_tty: Fix unsafe reference to "other" ldisc
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
tty: Retry failed reopen if tty teardown in-progress
tty: Wait interruptibly for tty lock on reopen
Here are some small staging driver fixes for 4.5-rc2. One of them
predated 4.4-final, but I missed that merge window due to the holliday.
The others fix reported issues that have come up recently. The tty
change is needed for the speakup driver fix and has the ack of the tty
driver maintainer as well, i.e. myself :)
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlauWLoACgkQMUfUDdst+ynHbQCfWlGgQhtadfhtiaIKLwqy9NPG
PksAn3/z4mXX037sfm2kZrcqtcNlv9zf
=Vdai
-----END PGP SIGNATURE-----
Merge tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes for 4.5-rc2.
One of them predated 4.4-final, but I missed that merge window due to
the holliday. The others fix reported issues that have come up
recently. The tty change is needed for the speakup driver fix and has
the ack of the tty driver maintainer as well, i.e. myself :)
All have been in linux-next with no reported issues"
* tag 'staging-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: speakup: fix read scrolled-back VT
Staging: speakup: Fix getting port information
Revert "Staging: panel: usleep_range is preferred over udelay"
iio: adis_buffer: Fix out-of-bounds memory access
Here's a single driver core fix that resolves an issue a lot of users
have been hitting for a while now. It's been tested a lot and has been
in linux-next successfully for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlauV+8ACgkQMUfUDdst+yk/OQCgzI8I8xgSbGIZBkO+mq+j43SR
FVYAoKWvwo55sqbKrDyN/bqLZWxwQYFV
=jvr3
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here's a single driver core fix that resolves an issue a lot of users
have been hitting for a while now. It's been tested a lot and has
been in linux-next successfully for a while"
* tag 'driver-core-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
base/platform: Fix platform drivers with no probe callback
Pull MIPS fix from Ralf Baechle:
"Just a single revert for a patch which I had upstreamed out of
sequence"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
Revert "MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function"
Pull x86 fixes from Thomas Gleixner:
"A bit on the largish side due to a series of fixes for a regression in
the x86 vector management which was introduced in 4.3. This work was
started in December already, but it took some time to fix all corner
cases and a couple of older bugs in that area which were detected
while at it
Aside of that a few platform updates for intel-mid, quark and UV and
two fixes for in the mm code:
- Use proper types for pgprot values to avoid truncation
- Prevent a size truncation in the pageattr code when setting page
attributes for large mappings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm/pat: Avoid truncation when converting cpa->numpages to address
x86/mm: Fix types used in pgprot cacheability flags translations
x86/platform/quark: Print boundaries correctly
x86/platform/UV: Remove EFI memmap quirk for UV2+
x86/platform/intel-mid: Join string and fix SoC name
x86/platform/intel-mid: Enable 64-bit build
x86/irq: Plug vector cleanup race
x86/irq: Call irq_force_move_complete with irq descriptor
x86/irq: Remove outgoing CPU from vector cleanup mask
x86/irq: Remove the cpumask allocation from send_cleanup_vector()
x86/irq: Clear move_in_progress before sending cleanup IPI
x86/irq: Remove offline cpus from vector cleanup
x86/irq: Get rid of code duplication
x86/irq: Copy vectormask instead of an AND operation
x86/irq: Check vector allocation early
x86/irq: Reorganize the search in assign_irq_vector
x86/irq: Reorganize the return path in assign_irq_vector
x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
x86/irq: Validate that irq descriptor is still active
x86/irq: Fix a race in x86_vector_free_irqs()
...
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
Pull scheduler fixes from Thomas Gleixner:
"Three small fixes in the scheduler/core:
- use after free in the numa code
- crash in the numa init code
- a simple spelling fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
pid: Fix spelling in comments
sched/numa: Fix use-after-free bug in the task_numa_compare
sched: Fix crash in sched_init_numa()
Pull perf fixes from Thomas Gleixner:
"This is much bigger than typical fixes, but Peter found a category of
races that spurred more fixes and more debugging enhancements. Work
started before the merge window, but got finished only now.
Aside of that this contains the usual small fixes to perf and tools.
Nothing particular exciting"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
perf: Remove/simplify lockdep annotation
perf: Synchronously clean up child events
perf: Untangle 'owner' confusion
perf: Add flags argument to perf_remove_from_context()
perf: Clean up sync_child_event()
perf: Robustify event->owner usage and SMP ordering
perf: Fix STATE_EXIT usage
perf: Update locking order
perf: Remove __free_event()
perf/bpf: Convert perf_event_array to use struct file
perf: Fix NULL deref
perf/x86: De-obfuscate code
perf/x86: Fix uninitialized value usage
perf: Fix race in perf_event_exit_task_context()
perf: Fix orphan hole
perf stat: Do not clean event's private stats
perf hists: Fix HISTC_MEM_DCACHELINE width setting
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tests: Remove wrong semicolon in while loop in CQM test
perf: Synchronously free aux pages in case of allocation failure
...
Pull locking fix from Thomas Gleixner:
"A single commit, which makes the rtmutex.wait_lock an irq safe lock.
This prevents a potential deadlock which can be triggered by the rcu
boosting code from rcu_read_unlock()"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Make wait_lock irq safe
Pull IRQ fixes from Ingo Molnar:
"Mostly irqchip driver fixes, but also an irq core crash fix and a
build fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mxs: Add missing set_handle_irq()
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/gic-v3-its: Recompute the number of pages on page size change
base: Export platform_msi_domain_[alloc,free]_irqs
of: MSI: Simplify irqdomain lookup
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
irqchip: Fix dependencies for archs w/o HAS_IOMEM
irqchip/s3c24xx: Mark init_eint as __maybe_unused
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
Pull debugobjects fix from Ingo Molnar:
"Bump up debugobjects pool limit that bigger s390 systems kept running
into"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Allow bigger number of early boot objects
- Use alternate group tracking for no-iommu (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=tLBl
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.5-rc2' of git://github.com/awilliam/linux-vfio
Pull VFIO fix from Alex Williamson:
"Use alternate group tracking for no-iommu"
* tag 'vfio-v4.5-rc2' of git://github.com/awilliam/linux-vfio:
vfio/noiommu: Don't use iommu_present() to track fake groups
Pull i2c fixes from Wolfram Sang:
"Here are two I2C driver regression fixes. piix4 gets a larger
overhaul fixing the latest refactoring and also an older known issue
as well. designware-pci gets a fix for a bad merge conflict
resolution"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: piix4: don't regress on bus names
i2c: designware-pci: use IRQF_COND_SUSPEND flag
i2c: piix4: Fully initialize SB800 before it is registered
i2c: piix4: Fix SB800 locking
Pull ARM fixes from Russell King:
"Just one fix for a -fstack-protector-strong problem from Kees Cook,
and adding the new copy_file_range syscall"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: wire up copy_file_range() syscall
ARM: 8500/1: fix atags_to_fdt with stack-protector-strong
- Wire up copy_file_range() syscall from Chandan Rajendra
- Simplify module TOC handling from Alan Modra
- Remove newly added extra definition of pmd_dirty from Stephen Rothwell
- Allow user space to map rtas_rmo_buf from Vasant Hegde
- Fix PE location code from Gavin Shan
- Remove PPMU_HAS_SSLOT flag for Power8 from Madhavan Srinivasan
- Fixup _HPAGE_CHG_MASK from Aneesh Kumar K.V
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWqy1MAAoJEFHr6jzI4aWAlcsP/1I1WbD3Ek8pL/ljTxD9bfxb
DxF/HklYphzJDEvupgjDrmJO0RuMHrItAqTqsFbpWfCgn6OtIL/QHgZK3Aebtgjq
7u6V6SqjfYO7vWnmknvzcG+wDrPb3FrXyrFDE/Stz8IIh9OYrO9HzamqPxfhovh1
RQzD5eh3FWS9gzKDTiwh5w/lqwgP9Mv0b7BJEUvkQWv9Y9ZG4ZQeQwelUqTD2MKx
UIVYHjHXiuYYiMP5u59V/VFULq5C7s+DqCENTwfVERfN75p3K/JnO0x/87uiz+U+
0Y5owkK7sTr/Ozo9rMF5mqd+JNUAutkiD/+xDBivnZlxM/cnGtPpc+D/g7+CT0ar
oh0GDtCEQeEzyoFHsizSAr1FvXfo7NelhzY9CIoi7KHwCBtZDOIhUndkEfsKnYea
oZSf86F5KqSw8vTOrrKT5gZLYu5ro513vQHg0vw+tNHIWppsIeW/Pbr9e0o7I6bV
px3EmKkuUJfSNBNyDscWdUetRWilZsGW+Gg47mlf8Dck091exJ6o1n7HU8Y83KP+
7QDGwT5AQAZ47Z1N1DyNY5V+9SiYYSrgWi9hQTCtQXKjgd0Cia4zTDaEEMGotfQM
7DoR6r9tdCphc1oIiUJHhdSgbnR7Yq8804Bc8LSy7gkv9ZjcPvbirgDDLnIJ9zib
yCt6l6sRkDKZqvlV4wqN
=KZ85
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Wire up copy_file_range() syscall from Chandan Rajendra
- Simplify module TOC handling from Alan Modra
- Remove newly added extra definition of pmd_dirty from Stephen Rothwell
- Allow user space to map rtas_rmo_buf from Vasant Hegde
- Fix PE location code from Gavin Shan
- Remove PPMU_HAS_SSLOT flag for Power8 from Madhavan Srinivasan
- Fixup _HPAGE_CHG_MASK from Aneesh Kumar K.V
* tag 'powerpc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fixup _HPAGE_CHG_MASK
powerpc/perf: Remove PPMU_HAS_SSLOT flag for Power8
powerpc/eeh: Fix PE location code
powerpc/mm: Allow user space to map rtas_rmo_buf
powerpc: Remove newly added extra definition of pmd_dirty
powerpc: Simplify module TOC handling
powerpc: Wire up copy_file_range() syscall
Pull s390 updates from Martin Schwidefsky:
"An optimization for irq-restore, the SSM instruction is quite a bit
slower than an if-statement and a STOSM.
The copy_file_range system all is added.
Cleanup for PCI and CIO.
And a couple of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: update measurement characteristics
s390/cio: ensure consistent measurement state
s390/cio: fix measurement characteristics memleak
s390/zcrypt: Fix cryptographic device id in kernel messages
s390/pci: remove iomap sanity checks
s390/pci: set error state for unusable functions
s390/pci: fix bar check
s390/pci: resize iomap
s390/pci: improve ZPCI_* macros
s390/pci: provide ZPCI_ADDR macro
s390/pci: adjust IOMAP_MAX_ENTRIES
s390/numa: move numa_init_late() from device to arch_initcall
s390: remove all usages of PSW_ADDR_INSN
s390: remove all usages of PSW_ADDR_AMODE
s390: wire up copy_file_range syscall
s390: remove superfluous memblock_alloc() return value checks
s390/numa: allocate memory with correct alignment
s390/irqflags: optimize irq restore
s390/mm: use TASK_MAX_SIZE where applicable
