Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach says:
====================
ptp: Add generic is_sync() function
as multiple PHY drivers such as micrel or TI dp83640 need to inspect whether a
given skb represents a PTP Sync message, provide a generic function for it. This
avoids code duplication and can be reused by future PHY IEEE 1588 implementations.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use generic ptp_msg_is_sync() function to avoid code duplication.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use generic ptp_msg_is_sync() function to avoid code duplication.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY drivers such as micrel or dp83640 need to analyze whether a given
skb is a PTP sync message for one step functionality.
In order to avoid code duplication introduce a generic function and
move it to ptp classify.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior says:
====================
net: Convert user to netif_rx(), part 2.
This is the second batch of converting netif_rx_ni() caller to
netif_rx(). The change making this possible is net-next and
netif_rx_ni() is a wrapper around netif_rx(). This is a clean up in
order to remove netif_rx_ni().
The brcmfmac changes are slilghtly larger because the inirq parameter
can be removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi017@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: libertas-dev@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: Wright Feng <wright.feng@infineon.com>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Maya Erez <merez@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: wil6210@qti.qualcomm.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-can@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.
Use netif_rx().
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Radu Pirea <radu-nicolae.pirea@oss.nxp.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dongli Zhang says:
====================
tun/tap: use kfree_skb_reason() to trace dropped skb
The commit c504e5c2f9 ("net: skb: introduce kfree_skb_reason()") has
introduced the kfree_skb_reason() to help track the reason.
The tun and tap are commonly used as virtio-net/vhost-net backend. This is to
use kfree_skb_reason() to trace the dropped skb for those two drivers.
Changed since v1:
- I have renamed many of the reasons since v1. I make them as generic as
possible so that they can be re-used by core networking and drivers.
Changed since v2:
- declare drop_reason as type "enum skb_drop_reason"
- handle the drop in skb_list_walk_safe() case for tap driver, and
kfree_skb_list_reason() is introduced
Changed since v3 (only for PATCH 4/4):
- rename to TAP_FILTER and TAP_TXFILTER
- honor reverse xmas tree style declaration for 'drop_reason' in
tun_net_xmit()
Changed since v4:
- make kfree_skb_list() static inline
- add 'computation' to SKB_CSUM comment
- change COPY_DATA to UCOPY_FAULT
- add 'metadata' to DEV_HDR comment
- expand comment on DEV_READY
- change SKB_TRIM to NOMEM
- chnage SKB_PULL to HDR_TRUNC
Changed since v5:
- rebase to net-next
The following reasons are introduced.
- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING
- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER
This is the output for TUN device.
<idle>-0 [029] ..s1. 450.727651: kfree_skb: skbaddr=0000000023d235cc protocol=0 location=00000000a6748854 reason: NOT_SPECIFIED
<idle>-0 [000] b.s3. 451.165671: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
<idle>-0 [000] b.s3. 453.149650: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
<idle>-0 [000] b.s3. 455.133576: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
<idle>-0 [000] b.s3. 457.117566: kfree_skb: skbaddr=000000006b5de7cc protocol=4 location=000000007c2b9eae reason: FULL_RING
This is the output for TAP device.
arping-7053 [006] ..s1. 1000.047753: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
<idle>-0 [022] ..s1. 1000.778514: kfree_skb: skbaddr=000000002c1e706c protocol=0 location=00000000a6748854 reason: NOT_SPECIFIED
arping-7053 [006] ..s1. 1001.047830: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
arping-7053 [006] ..s1. 1002.047918: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
arping-7053 [006] ..s1. 1003.048017: kfree_skb: skbaddr=000000008618a587 protocol=2054 location=00000000743ad4a7 reason: FULL_RING
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The TUN can be used as vhost-net backend. E.g, the tun_net_xmit() is the
interface to forward the skb from TUN to vhost-net/virtio-net.
However, there are many "goto drop" in the TUN driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_DEV_READY
- SKB_DROP_REASON_NOMEM
- SKB_DROP_REASON_HDR_TRUNC
- SKB_DROP_REASON_TAP_FILTER
- SKB_DROP_REASON_TAP_TXFILTER
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No functional change.
Just to split the if statement into different conditions to use
kfree_skb_reason() to trace the reason later.
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TAP can be used as vhost-net backend. E.g., the tap_handle_frame() is
the interface to forward the skb from TAP to vhost-net/virtio-net.
However, there are many "goto drop" in the TAP driver. Therefore, the
kfree_skb_reason() is involved at each "goto drop" to help userspace
ftrace/ebpf to track the reason for the loss of packets.
The below reasons are introduced:
- SKB_DROP_REASON_SKB_CSUM
- SKB_DROP_REASON_SKB_GSO_SEG
- SKB_DROP_REASON_SKB_UCOPY_FAULT
- SKB_DROP_REASON_DEV_HDR
- SKB_DROP_REASON_FULL_RING
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit a505cce6f7.
Leon says:
We already discussed that. SMC should be changed to use
RDMA CQ pool API
drivers/infiniband/core/cq.c.
ib_poll_handler() has much better implementation (tracing,
IRQ rescheduling, proper error handling) than this SMC variant.
Since we will switch to ib_poll_handler() in the future,
revert this patch.
Link: https://lore.kernel.org/netdev/20220301105332.GA9417@linux.alibaba.com/
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Updates.
This patch series contains mainly NVRAM related features. More
NVRAM error checking and logging are added when installing firmware
packages. A new devlink hw health report is now added to report
and diagnose NVRAM issues. Other miscellaneous patches include
reporting correctly cards that don't support link pause, adding
an internal unknown link state, and avoiding unnecessary link
toggle during firmware reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an NVM test function for devlink hw reporter.
In this function an NVM VPD area is read followed by
a write. Test result is cached and if it is successful then
the next test can be conducted only after HW_RETEST_MIN_TIME to
avoid frequent writes to the NVM.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reporter will report NVM errors which are non-fatal.
When we receive these NVM error events, we'll report it
through this new hw health reporter.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Health reporter state should be maintained over resets. Previously
reporters were destroyed if the device capabilities changed, but
since none of the reporters depend on capabilities anymore, this
logic should be removed.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the flow control settings have been changed, a subsequent FW reset
may cause the ethernet link to toggle unnecessarily. This link toggle
will increase the down time by a few seconds.
The problem is caused by bnxt_update_phy_setting() detecting a false
mismatch in the flow control settings between the stored software
settings and the current FW settings after the FW reset. This mismatch
is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an
inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG
bit should not be added to link_info->req_flow_ctrl.
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some cards are configured to never support link pause or PFC. Discover
these cards and properly report no pause support to ethtool. Disable
PFC settings from DCBNL if PFC is unsupported.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will force link state to always be logged for initial NIC open.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FW returns error code "NVM_INSTALL_UPDATE_CMD_ERR_CODE_ANTI_ROLLBACK"
in the response to indicate that HWRM_NVM_INSTALL_UPDATE command has
failed due to Anti-rollback feature. Parse the error and return an
appropriate error code to the user.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is in anticipation of handling more "cmd_err" from FW in the next
patch.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock says:
====================
NAPI/GRO support for axienet driver
Add support for NAPI and GRO receive in the Xilinx AXI Ethernet driver,
and some other related cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to configure the RX/TX coalesce timer with ethtool.
Change default setting to scale with the clock rate rather than being a
fixed number of clock cycles.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that NAPI has been implemented, the hardware interrupt mitigation
mechanism is not needed to avoid excessive interrupt load in most cases.
Reduce the default RX interrupt threshold to 1 to reduce introduced
latency. This can be increased with ethtool if desired if some applications
still want to reduce interrupts.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement NAPI and GRO receive. In addition to better performance, this
also avoids handling RX packets in hard IRQ context, which reduces the
IRQ latency impact to other devices.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the RX or TX coalesce count is set to 1, there's no point in
setting the delay timer value since an interrupt will already be raised
on every packet, and the delay interrupt just causes extra pointless
interrupts.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the DMA error handling process, and remove some duplicated code
between the DMA error handling and the stop function.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using lp->ndev.parent to find the correct device to use for
DMA API calls, just use the dev attribute in the device structure.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a memory allocation error occurred during an attempt to refill a slot
in the RX ring after the packet was received, the hardware tail pointer
would still have been updated to point to or past the slot which remained
marked as previously completed. This would likely result in the DMA engine
raising an error when it eventually tried to use that slot again.
If a slot cannot be refilled, then just stop processing and do not move
the tail pointer past it. On the next attempt, we should skip receiving
the packet from the empty slot and just try to refill it again.
This failure mode has not actually been observed, but was found as part
of other driver updates.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: add rtl8_4t tag
This patch series adds support for rtl8_4t tag. It is a variant of
rtl8_4 tag, with identical values but placed at the end of the packet
(before CRC).
It forces checksum in software before adding the tag as those extra
bytes at the end of the packet would be summed together with the rest of
the payload. When the switch removes the tag before sending the packet
to the network, that checksum will not match.
It might be useful to diagnose or avoid checksum offload issues. With an
ethertype tag like rtl8_4, the cpu port ethernet driver must work with
cksum_start and chksum_offset to correctly calculate checksums. If not,
the checksum field will be broken (it will contain the fake ip header
sum). In those cases, using 'rtl8_4t' might be an alternative way to
avoid checksum offload, either using runtime or device-tree property.
Regards,
Luiz
v4-v5)
- tags in alphabetical order in dsa_port.yaml
- remove ret var from rtl8365mb_change_tag_protocol
- Comment typos fixes
v3-v4)
- added rtl8_4 and rtl8_4t to dsa_port.yaml
- removed generic considerations about checksum problems with DSA tags.
They belong to Documentation/networking/dsa/dsa.rst
v2-v3)
- updated tag documentation (file header)
- do not remove position and format from rtl8365mb_cpu
- reinstate cpu to rtl8365mb
- moved rtl8365mb_change_tag_protocol after rtl8365mb_cpu_config
- do not modify rtl8365mb_cpu_config() logic
- remove cpu arg from rtl8365mb_cpu_config(); get it from priv
- dropped tag_protocol from rtl8365mb. It is now derived from
cpu->position.
- init cpu struct before dsa_register as default tag must be already
defined before dsa_register()
- fix formatting issues
v1-v2)
- remove mention to tail tagger, use trailing tagger.
- use void* instead of char* for pointing to tag beginning
- use memcpy to avoid problems with unaligned tags
- calculate checksum if it still pending
- keep in-use tag protocol in memory instead of reading from switch
register
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The trailing tag is also supported by this family. The default is still
rtl8_4 but now the switch supports changing the tag to rtl8_4t.
Reintroduce the dropped cpu in struct rtl8365mb (removed by 6147631).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Realtek switches supports the same tag both before ethertype or between
payload and the CRC.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Realtek rtl8365mb DSA driver can use these two tag formats.
Cc: devicetree@vger.kernel.org
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Selftest refinements and a new test
Patches 1 and 11 improve the printed output of the mptcp_join.sh
selftest.
Patches 2-8 add a test for the MP_FASTCLOSE option, including
prerequisite changes like additional MPTCP MIBs.
Patches 9-10 add some groundwork for upcoming tests.
====================
Link: https://lore.kernel.org/r/20220304193636.219315-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.
The new output looks like this:
002 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - rmsf [ ok ]
003 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - rmsf [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.
The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,
chk_csum_nr "" +2 +2
indicates that two or more checksum errors are allowed in both ns1 and
ns2.
The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.
Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the invert bytes check for the output data in
check_transfer().
Instead of the file mismatch error:
[ FAIL ] file received by server does not match (in, out):
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
Print out the inverted bytes like this:
file received by server has inverted byte at 7454789
file received by server has inverted byte at 7454790
file received by server has inverted byte at 7454791
file received by server has inverted byte at 7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.
The output looks like this:
Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test syn[ ok ] - synack[ ok ] - ack[ ok ]
ctx[ ok ] - fclzrx[ ok ]
rtx[ ok ] - rstrx [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior