include/net/tls.h is getting a little long, and is probably hard
for driver authors to navigate. Split out the internals into a
header which will live under net/tls/. While at it move some
static inlines with a single user into the source files, add
a few tls_ prefixes and fix spelling of 'proccess'.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AAD size is either 5 or 13. Really no point complicating
the code for the 8B of difference. This will also let us
turn the chunked up buffer into a sane struct.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_skb_cb lives within skb->cb[]. skb->cb[] straddles
2 cache lines, each containing 24B of data.
The first cache line does not contain much interesting
information for users of strparser, so pad things a little.
Previously strp_msg->full_len would live in the first cache
line and strp_msg->offset in the second.
We need to reorder the 8 byte temp_reg with struct tls_msg
to prevent a 4B hole which would push the struct over 48B.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reading .sysctl_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since optimisitic decrypt may add extra load in case of retries
require socket owner to explicitly opt-in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c6 ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc2 ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers of taprio_offload_get() and taprio_offload_free() prior to
the blamed commit are conditionally compiled based on CONFIG_NET_SCH_TAPRIO.
felix_vsc9959.c is different; it provides vsc9959_qos_port_tas_set()
even when taprio is compiled out.
Provide shim definitions for the functions exported by taprio so that
felix_vsc9959.c is able to compile. vsc9959_qos_port_tas_set() in that
case is dead code anyway, and ocelot_port->taprio remains NULL, which is
fine for the rest of the logic.
Fixes: 1c9017e44a ("net: dsa: felix: keep reference on entire tc-taprio config")
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220704190241.1288847-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Microchip LAN937X switches have a tagging protocol which is
very similar to KSZ tagging. So that the implementation is added to
tag_ksz.c and reused common APIs
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a tracepoint event for 9p fid lifecycle tracing: when a fid
is created, its reference count increased/decreased, and freed.
The new 9p_fid_ref tracepoint should help anyone wishing to debug any
fid problem such as missing clunk (destroy) or use-after-free.
Link: https://lkml.kernel.org/r/20220612085330.1451496-6-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
I was recently reminded that it is not clear that p9_client_clunk()
was actually just decrementing refcount and clunking only when that
reaches zero: make it clear through a set of helpers.
This will also allow instrumenting refcounting better for debugging
next patch
Link: https://lkml.kernel.org/r/20220612085330.1451496-5-asmadeus@codewreck.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
There are no more users for the mentioned macros, just
drop them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to retrieve EHT capabilities and EHT operation elements
passed by the userspace in the beacon template and store the pointers
in struct cfg80211_ap_settings to be used by the drivers.
Co-developed-by: Vikram Kandukuri <quic_vikram@quicinc.com>
Signed-off-by: Vikram Kandukuri <quic_vikram@quicinc.com>
Co-developed-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20220523064904.28523-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Increase akm_suites array size in struct cfg80211_crypto_settings to 10
and advertise the capability to userspace. This allows userspace to send
more than two AKMs to driver in netlink commands such as
NL80211_CMD_CONNECT.
This capability is needed for implementing WPA3-Personal transition mode
correctly with any driver that handles roaming internally. Currently,
the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256,
SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing
the akm_suites array size to 10 should be reasonable for future
usecases.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commits 6a789ba679 and
2433647bc8.
The virtual time scheduler code has a number of issues:
- queues slowed down by hardware/firmware powersave handling were not properly
handled.
- on ath10k in push-pull mode, tx queues that the driver tries to pull from
were starved, causing excessive latency
- delay between tx enqueue and reported airtime use were causing excessively
bursty tx behavior
The bursty behavior may also be present on the round-robin scheduler, but there
it is much easier to fix without introducing additional regressions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20220625212411.36675-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Somehow kernel-doc complains here about strong markup, but
we really don't need the [] so just remove that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The lack of the colon makes it not parse the function parameter:
include/net/mac80211.h:6250: warning: Function parameter or member 'vif' not described in 'ieee80211_channel_switch_disconnect'
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/11c1bdb861d89c93058fcfe312749b482851cbdb.1656409369.git.mchehab@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are currently 17 kernel-doc warnings on this file:
include/net/cfg80211.h:391: warning: Function parameter or member 'bw' not described in 'ieee80211_eht_mcs_nss_supp'
include/net/cfg80211.h:437: warning: Function parameter or member 'eht_cap' not described in 'ieee80211_sband_iftype_data'
include/net/cfg80211.h:507: warning: Function parameter or member 's1g' not described in 'ieee80211_sta_s1g_cap'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_beacon' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_presp' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1430: warning: Enum value 'STATION_PARAM_APPLY_STA_TXPOWER' not described in enum 'station_parameters_apply_mask'
include/net/cfg80211.h:2195: warning: Function parameter or member 'dot11MeshConnectedToAuthServer' not described in 'mesh_config'
include/net/cfg80211.h:2341: warning: Function parameter or member 'short_ssid' not described in 'cfg80211_scan_6ghz_params'
include/net/cfg80211.h:3328: warning: Function parameter or member 'kck_len' not described in 'cfg80211_gtk_rekey_data'
include/net/cfg80211.h:3698: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_result'
include/net/cfg80211.h:3828: warning: Function parameter or member 'global_mcast_stypes' not described in 'mgmt_frame_regs'
include/net/cfg80211.h:4977: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_capabilities'
include/net/cfg80211.h:5742: warning: Function parameter or member 'u' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'links' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'valid_links' not described in 'wireless_dev'
include/net/cfg80211.h:6076: warning: Function parameter or member 'is_amsdu' not described in 'ieee80211_data_to_8023_exthdr'
include/net/cfg80211.h:6949: warning: Function parameter or member 'sig_dbm' not described in 'cfg80211_notify_new_peer_candidate'
Address them, in order to build a better documentation from this
header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/f6f522cdc716a01744bb0eae2186f4592976222b.1656409369.git.mchehab@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1 ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e3 ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit ed6cd6a178 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe
Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the capability to specify gfp_t parameter to
ieeee80211_obss_color_collision_notify routine since it runs in
interrupt context in ieee80211_rx_check_bss_color_collision().
Fixes: 6d945a33f2 ("mac80211: introduce BSS color collision detection")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/02c990fb3fbd929c8548a656477d20d6c0427a13.1655419135.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When verdict is NF_STOLEN, the skb might have been freed.
When tracing is enabled, this can result in a use-after-free:
1. access to skb->nf_trace
2. access to skb->mark
3. computation of trace id
4. dump of packet payload
To avoid 1, keep a cached copy of skb->nf_trace in the
trace state struct.
Refresh this copy whenever verdict is != STOLEN.
Avoid 2 by skipping skb->mark access if verdict is STOLEN.
3 is avoided by precomputing the trace id.
Only dump the packet when verdict is not "STOLEN".
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The switch that is present on the Renesas RZ/N1 SoC uses a specific
VLAN value followed by 6 bytes which contains forwarding configuration.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to allow dsa drivers to specify the .get_rmon_stats()
operation.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the len fields manipulation in the skbs to a helper function.
There is a comment specifically requesting this and there are several
other areas in the code displaying the same pattern which can be
refactored.
This improves code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220622160853.GA6478@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add per port priority support for bonding active slave re-selection during
failover. A higher number means higher priority in selection. The primary
slave still has the highest priority. This option also follows the
primary_reselect rules.
This option could only be configured via netlink.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, bond_opt_value are mostly used for bonding option settings. If
we want to set a value for slave, we need to re-alloc a string to store
both slave name and vlaue, like bond_option_queue_id_set() does, which
is complex and dumb.
As Jon suggested, let's add a union field slave_dev for bond_opt_value,
which will be benefit for future slave option setting. In function
__bond_opt_init(), we will always check the extra field and set it
if it's not NULL.
Suggested-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Functions xfrm_register_km and xfrm_unregister_km do always return 0,
change the type of functions to void.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 8a59f9d1e3 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to
the new tcp_bpf_update_proto() function. I'm guessing that this
was done to allow creating psocks for non-inet sockets.
Unfortunately the destruction path for psock includes the ULP
unwind, so we need to fail the sk_psock_init() itself.
Otherwise if ULP is already present we'll notice that later,
and call tcp_update_ulp() with the sk_proto of the ULP
itself, which will most likely result in the ULP looping
its callbacks.
Fixes: 8a59f9d1e3 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
unix_table_locks are to protect the global hash table, unix_socket_table.
The previous commit removed it, so let's clean up the unnecessary locks.
Here is a test result on EC2 c5.9xlarge where 10 processes run concurrently
in different netns and bind 100,000 sockets for each.
without this series : 1m 38s
with this series : 11s
It is ~10x faster because the global hash table is split into 10 netns in
this case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit replaces the global hash table with a per-netns one and removes
the global one.
We now link a socket in each netns's hash table so we can save some netns
comparisons when iterating through a hash bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds a per netns hash table for AF_UNIX, which size is fixed
as UNIX_HASH_SIZE for now.
The first implementation defines a per-netns hash table as a single array
of lock and list:
struct unix_hashbucket {
spinlock_t lock;
struct hlist_head head;
};
struct netns_unix {
struct unix_hashbucket *hash;
...
};
But, Eric pointed out memory cost that the structure has holes because of
sizeof(spinlock_t), which is 4 (or more if LOCKDEP is enabled). [0] It
could be expensive on a host with thousands of netns and few AF_UNIX
sockets. For this reason, a per-netns hash table uses two dense arrays.
struct unix_table {
spinlock_t *locks;
struct hlist_head *buckets;
};
struct netns_unix {
struct unix_table table;
...
};
Note the length of the list has a significant impact rather than lock
contention, so having shared locks can be an option. But, per-netns
locks and lists still perform better than the global locks and per-netns
lists. [1]
Also, this patch adds a change so that struct netns_unix disappears from
struct net if CONFIG_UNIX is disabled.
[0]: https://lore.kernel.org/netdev/CANn89iLVxO5aqx16azNU7p7Z-nz5NrnM5QTqOzueVxEnkVTxyg@mail.gmail.com/
[1]: https://lore.kernel.org/netdev/20220617175215.1769-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the size of AF_UNIX hash table is UNIX_HASH_SIZE * 2,
the first half for bind()ed sockets and the second half for unbound
ones. UNIX_HASH_SIZE * 2 is used to define the table and iterate
over it.
In some places, we use ARRAY_SIZE(unix_socket_table) instead of
UNIX_HASH_SIZE * 2. However, we cannot use it anymore because we
will allocate the hash table dynamically. Then, we would have to
add UNIX_HASH_SIZE * 2 in many places, which would be troublesome.
This patch adapts the UNIX_HASH_SIZE definition to include bound
and unbound sockets and defines a new UNIX_HASH_MOD macro to ease
calculations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
raw_diag_dump() can use rcu_read_lock() instead of read_lock()
Now the hashinfo lock is only used from process context,
in write mode only, we can convert it to a spinlock,
and we do not need to block BH anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220620100509.3493504-1-eric.dumazet@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently both splice() and sockmap use ->read_sock() to
read skb from receive queue, but for sockmap we only read
one entire skb at a time, so ->read_sock() is too conservative
to use. Introduce a new proto_ops ->read_skb() which supports
this sematic, with this we can finally pass the ownership of
skb to recv actors.
For non-TCP protocols, all ->read_sock() can be simply
converted to ->read_skb().
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-3-xiyou.wangcong@gmail.com
This patch inroduces tcp_read_skb() based on tcp_read_sock(),
a preparation for the next patch which actually introduces
a new sock ops.
TCP is special here, because it has tcp_read_sock() which is
mainly used by splice(). tcp_read_sock() supports partial read
and arbitrary offset, neither of them is needed for sockmap.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-2-xiyou.wangcong@gmail.com
The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We need to be able to access these in a race-free way under
traffic while adding/removing them, so RCU-ify the pointers.
This requires passing a link_sta to a lot of functions so
we don't have to do the RCU handling everywhere.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In start_ap and stop_ap mac80211 callbacks pass the link_id
to the drivers.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add some optional callbacks for link add/remove so that
drivers can react here. Initially, I thought it would be
sufficient to just create the link in start_ap etc., but
it turns out that's not so simple, since there are quite
a few callbacks that can be called: if they're erroneously
without start_ap, things might crash.
Thus it might be easier for drivers to allocate all the
necessary data structures immediately, to not have to
worry about it in each callback, since cfg80211 checks
that the link ID is valid (has been added.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary infrastructure, including a new driver
method, to add/remove links to/from a station. To do this,
refactor the link alloc/free a bit, splitting that so we
can do it without linking them, to handle failures better.
Note that a station entry must be created representing an
MLD or a non-MLD STA, it cannot change between the two.
When representing an MLD, the 'deflink' is used for the
first link, which might be removed later, in which case
the memory isn't reused.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Take a few bits out of the control.flags to add the link ID
to TX frame metadata, so drivers don't need to look it up
by the address themselves. Implement that lookup where it's
needed, for internal frame TX, and set it to "unspecified"
for data transmissions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the interface is an MLD, then we don't know which band
the frame will be transmitted on, and we don't know how to
look up the band. Set the band information to zero in that
case, the driver cannot rely on it anyway.
No longer inline ieee80211_tx_skb_tid() since it's even
bigger now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary infrastructure, including a new driver
method, to add/remove links to/from an interface.
Also add the missing link address to bss_conf (which we
use as link_conf too), and fill it, in station mode for
now just randomly, in AP mode we get the address from
cfg80211 since the link must be created with an address
first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For authentication, we need the BSS, the link_id and the AP
MLD address to create the link and station, (for now) the
driver assigns a link address and sends the frame, the MLD
address needs to be the address of the interface.
For association, pass the list of BSSes that were selected
for the MLO connection, along with extra per-STA profile
elements, the AP MLD address and the link ID on which the
association request should be sent.
Note that for now we don't have a proper way to pass the link
address(es) and so the driver/mac80211 will select one, but
depending on how that selection works it means that assoc w/o
auth data still being around (mac80211 implementation detail)
the association won't necessarily work - so this will need to
be extended in the future to sort out the link addressing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Start making some SMPS related code MLD-aware. This isn't
really done yet, but again cuts down our 'deflink' reliance.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove MAX_STA_LINKS and use IEEE80211_MLD_MAX_NUM_LINKS
instead to unify between the station and other data structures.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses deflink/bss_conf/etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add pointers so we can start using link_id throughout the
code, even if for now only link ID 0 is valid, pointing
to the "built-in" bss_conf, which is used by drivers that
are not aware of MLD.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.
Some adjustments were done with the following spatch:
@@
expression sdata;
struct ieee80211_vif *vifp;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
(
-sdata->vif.bss_conf.var
+sdata->vif.cfg.var
|
-vifp->bss_conf.var
+vifp->cfg.var
)
@bss_conf@
struct ieee80211_bss_conf *bss_conf;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
-bss_conf->var
+vif_cfg->var
(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.
Most transformations were done with the following spatch:
@@
expression sdata;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-sdata->vif.var
+sdata->vif.bss_conf.var
@@
struct ieee80211_vif *vif;
identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
@@
-vif->var
+vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.
So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.
For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.
Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.
I thought rwlock were at fault and sent this patch:
https://lkml.org/lkml/2022/6/17/272
But Peter and Linus essentially told me rwlock had to be unfair.
We need to get rid of rwlock in networking code.
Without this fix, following script triggers soft lockups:
for i in {1..48}
do
ping -f -n -q 127.0.0.1 &
sleep 0.1
done
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to prepare the following patch,
I change raw v4 & v6 code to use more conventional
iterators.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-06-17
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new helpers bpf_tcp_raw_{gen,check}_syncookie_ipv{4,6} allow an XDP
program to generate SYN cookies in response to TCP SYN packets and to
check those cookies upon receiving the first ACK packet (the final
packet of the TCP handshake).
Unlike bpf_tcp_{gen,check}_syncookie these new helpers don't need a
listening socket on the local machine, which allows to use them together
with synproxy to accelerate SYN cookie generation.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220615134847.3753567-4-maximmi@nvidia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sk_memory_allocated_add() has three callers, and returns
to them @memory_allocated.
sk_forced_mem_schedule() is one of them, and ignores
the returned value.
Change sk_memory_allocated_add() to return void.
Change sock_reserve_memory() and __sk_mem_raise_allocated()
to call sk_memory_allocated().
This removes one cache line miss [1] for RPC workloads,
as first skbs in TCP write queue and receive queue go through
sk_forced_mem_schedule().
[1] Cache line holding tcp_memory_allocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcp_memory_allocated can hit tcp_mem[] limits quite fast.
Each TCP socket can forward allocate up to 2 MB of memory, even after
flow became less active.
10,000 sockets can have reserved 20 GB of memory,
and we have no shrinker in place to reclaim that.
Instead of trying to reclaim the extra allocations in some places,
just keep sk->sk_forward_alloc values as small as possible.
This should not impact performance too much now we have per-cpu
reserves: Changes to tcp_memory_allocated should not be too frequent.
For sockets not using SO_RESERVE_MEM:
- idle sockets (no packets in tx/rx queues) have zero forward alloc.
- non idle sockets have a forward alloc smaller than one page.
Note:
- Removal of SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD
is left to MPTCP maintainers as a follow up.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If sk->sk_forward_alloc is 150000, and we need to schedule 150001 bytes,
we want to allocate 1 byte more (rounded up to one page),
instead of 150001 :/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We plan keeping sk->sk_forward_alloc as small as possible
in future patches.
This means we are going to call sk_memory_allocated_add()
and sk_memory_allocated_sub() more often.
Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each protocol having a ->memory_allocated pointer gets a corresponding
per-cpu reserve, that following patches will use.
Instead of having reserved bytes per socket,
we want to have per-cpu reserves.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to memcg interface, SK_MEM_QUANTUM is effectively PAGE_SIZE.
This might change in the future, but it seems better to avoid the
confusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit bd68a2a854.
This change broke memcg on arches with PAGE_SIZE != 4096
Later, commit 2bb2f5fb21 ("net: add new socket option SO_RESERVE_MEM")
also assumed PAGE_SIZE==SK_MEM_QUANTUM
Following patches in the series will greatly reduce the over allocations
problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here's a first set of patches for v5.20. This is just a
queue flush, before we get things back from net-next that
are causing conflicts, and then can start merging a lot
of MLO (multi-link operation, part of 802.11be) code.
Lots of cleanups all over.
The only notable change is perhaps wilc1000 being the
first driver to disable WEP (while enabling WPA3).
-----BEGIN PGP SIGNATURE-----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=E0Dx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next patches for v5.20
Here's a first set of patches for v5.20. This is just a
queue flush, before we get things back from net-next that
are causing conflicts, and then can start merging a lot
of MLO (multi-link operation, part of 802.11be) code.
Lots of cleanups all over.
The only notable change is perhaps wilc1000 being the
first driver to disable WEP (while enabling WPA3).
* tag 'wireless-next-2022-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (29 commits)
wifi: mac80211_hwsim: Directly use ida_alloc()/free()
wifi: mac80211: refactor some key code
wifi: mac80211: remove cipher scheme support
wifi: nl80211: fix typo in comment
wifi: virt_wifi: fix typo in comment
rtw89: add new state to CFO state machine for UL-OFDMA
rtw89: 8852c: add trigger frame counter
ieee80211: add trigger frame definition
wifi: wfx: Remove redundant NULL check before release_firmware() call
wifi: rtw89: support MULTI_BSSID and correct BSSID mask of H2C
wifi: ray_cs: Drop useless status variable in parse_addr()
wifi: ray_cs: Utilize strnlen() in parse_addr()
wifi: rtw88: use %*ph to print small buffer
wifi: wilc1000: add IGTK support
wifi: wilc1000: add WPA3 SAE support
wifi: wilc1000: remove WEP security support
wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down
wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()
wifi: rtw88: Fix Sparse warning for rtw8821c_hw_spec
wifi: rtw88: Fix Sparse warning for rtw8723d_hw_spec
...
====================
Link: https://lore.kernel.org/r/20220610142838.330862-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only driver using this was iwlwifi, where we just removed
the support because it was never really used. Remove the code
from mac80211 as well.
Change-Id: I1667417a5932315ee9d81f5c233c56a354923f09
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a cleanup patch following commit e6175a2ed1
("xfrm: fix "disable_policy" flag use when arriving from different devices")
which made DST_NOPOLICY no longer be used for inbound policy checks.
On outbound the flag was set, but never used.
As such, avoid setting it altogether and remove the nopolicy argument
from rt_dst_alloc().
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add support for reporting errors via extack in both bond_newlink
and bond_changelink.
Instead of having to look in the kernel log for why an option was not
correct just report the error to the user via the extack variable.
What is currently reported today:
ip link add bond0 type bond
ip link set bond0 up
ip link set bond0 type bond mode 4
RTNETLINK answers: Device or resource busy
After this change:
ip link add bond0 type bond
ip link set bond0 up
ip link set bond0 type bond mode 4
Error: unable to set option because the bond is up.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in commit 316580b69d ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resurrect ubsan overflow checks and ubsan report this warning,
fix it by change the variable [length] type to size_t.
UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19
2147479552 + 8567 cannot be represented in type 'int'
CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x214/0x230
show_stack+0x30/0x78
dump_stack_lvl+0xf8/0x118
dump_stack+0x18/0x30
ubsan_epilogue+0x18/0x60
handle_overflow+0xd0/0xf0
__ubsan_handle_add_overflow+0x34/0x44
__ip6_append_data.isra.48+0x1598/0x1688
ip6_append_data+0x128/0x260
udpv6_sendmsg+0x680/0xdd0
inet6_sendmsg+0x54/0x90
sock_sendmsg+0x70/0x88
____sys_sendmsg+0xe8/0x368
___sys_sendmsg+0x98/0xe0
__sys_sendmmsg+0xf4/0x3b8
__arm64_sys_sendmmsg+0x34/0x48
invoke_syscall+0x64/0x160
el0_svc_common.constprop.4+0x124/0x300
do_el0_svc+0x44/0xc8
el0_svc+0x3c/0x1e8
el0t_64_sync_handler+0x88/0xb0
el0t_64_sync+0x16c/0x170
Changes since v1:
-Change the variable [length] type to unsigned, as Eric Dumazet suggested.
Changes since v2:
-Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested.
Changes since v3:
-Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as
Jakub Kicinski suggested.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-1-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Despite these inline functions having full visibility to the compiler
at compile time, they still strip const from passed pointers.
This change allows for functions in various network drivers to be marked as
const that could not be marked const before.
Signed-off-by: Peter Lafreniere <pjlafren@mtu.edu>
Link: https://lore.kernel.org/r/20220606113458.35953-1-pjlafren@mtu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix NAT support for NFPROTO_INET without layer 3 address,
from Florian Westphal.
2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path.
3) Use list to collect flowtable hooks to be deleted.
4) Initialize list of hook field in flowtable transaction.
5) Release hooks on error for flowtable updates.
6) Memleak in hardware offload rule commit and abort paths.
7) Early bail out in case device does not support for hardware offload.
This adds a new interface to net/core/flow_offload.c to check if the
flow indirect block list is empty.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: bail out early if hardware offload is not supported
netfilter: nf_tables: memleak flow rule from commit path
netfilter: nf_tables: release new hooks on unsupported flowtable flags
netfilter: nf_tables: always initialize flowtable hook list in transaction
netfilter: nf_tables: delete flowtable hooks via transaction list
netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path
netfilter: nat: really support inet nat without l3 address
====================
Link: https://lore.kernel.org/r/20220606212055.98300-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make the code clear, reformat the comment in dropreason.h to k-doc
style.
Now, the comment can pass the check of kernel-doc without warnning:
$ ./scripts/kernel-doc -v -none include/linux/dropreason.h
include/linux/dropreason.h:7: info: Scanning doc for enum skb_drop_reason
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is annoying to add new skb drop reasons to 'enum skb_drop_reason'
and TRACE_SKB_DROP_REASON in trace/event/skb.h, and it's easy to forget
to add the new reasons we added to TRACE_SKB_DROP_REASON.
TRACE_SKB_DROP_REASON is used to convert drop reason of type number
to string. For now, the string we passed to user space is exactly the
same as the name in 'enum skb_drop_reason' with a 'SKB_DROP_REASON_'
prefix. Therefore, we can use 'auto-generation' to generate these
drop reasons to string at build time.
The new source 'dropreason_str.c' will be auto generated during build
time, which contains the string array
'const char * const drop_reasons[]'.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As the skb drop reasons are getting more and more, move the enum
'skb_drop_reason' and related function to the standalone header
'dropreason.h', as Jakub Kicinski suggested.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device
provides the .ndo_setup_tc interface or there is an indirect flow block
that has been registered. Otherwise, bail out early from the preparation
phase. Moreover, validate that family == NFPROTO_NETDEV and hook is
NF_NETDEV_INGRESS.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd2 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are session cleanup problems in ax25_release() and
ax25_disconnect(). If we setup a session and then disconnect,
the disconnected session is still in "LISTENING" state that
is shown below.
Active AX.25 sockets
Dest Source Device State Vr/Vs Send-Q Recv-Q
DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0
DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0
The first reason is caused by del_timer_sync() in ax25_release().
The timers of ax25 are used for correct session cleanup. If we use
ax25_release() to close ax25 sessions and ax25_dev is not null,
the del_timer_sync() functions in ax25_release() will execute.
As a result, the sessions could not be cleaned up correctly,
because the timers have stopped.
In order to solve this problem, this patch adds a device_up flag
in ax25_dev in order to judge whether the device is up. If there
are sessions to be cleaned up, the del_timer_sync() in
ax25_release() will not execute. What's more, we add ax25_cb_del()
in ax25_kill_by_device(), because the timers have been stopped
and there are no functions that could delete ax25_cb if we do not
call ax25_release(). Finally, we reorder the position of
ax25_list_lock in ax25_cb_del() in order to synchronize among
different functions that call ax25_cb_del().
The second reason is caused by improper check in ax25_disconnect().
The incoming ax25 sessions which ax25->sk is null will close
heartbeat timer, because the check "if(!ax25->sk || ..)" is
satisfied. As a result, the session could not be cleaned up properly.
In order to solve this problem, this patch changes the improper
check to "if(ax25->sk && ..)" in ax25_disconnect().
What`s more, the ax25_disconnect() may be called twice, which is
not necessary. For example, ax25_kill_by_device() calls
ax25_disconnect() and sets ax25->state to AX25_STATE_0, but
ax25_release() calls ax25_disconnect() again.
In order to solve this problem, this patch add a check in
ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD,
the ax25_disconnect() in ax25_release() should not be executed.
Fixes: 82e31755e5 ("ax25: Fix UAF bugs in ax25 timers")
Fixes: 8a367e74c0 ("ax25: Fix segfault after sock connection timeout")
Reported-and-tested-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove inactive bool field in nft_hook object that was introduced in
abadb2f865 ("netfilter: nf_tables: delete devices from flowtable").
Move stale flowtable hooks to transaction list instead.
Deleting twice the same device does not result in ENOENT.
Fixes: abadb2f865 ("netfilter: nf_tables: delete devices from flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save
256 bytes if IPv6 not configed. Also add this protection for function
bond_is_ip6_target_ok() and bond_get_targets_ip6().
Remove the IS_ENABLED() check for bond_opts[] as this will make
BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add
a dummy bond_option_ns_ip6_targets_set() for this situation.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In qdisc_run_end(), the spin_unlock() only has store-release semantic,
which guarantees all earlier memory access are visible before it. But
the subsequent test_bit() has no barrier semantics so may be reordered
ahead of the spin_unlock(). The store-load reordering may cause a packet
stuck problem.
The concurrent operations can be described as below,
CPU 0 | CPU 1
qdisc_run_end() | qdisc_run_begin()
. | .
----> /* may be reorderd here */ | .
| . | .
| spin_unlock() | set_bit()
| . | smp_mb__after_atomic()
---- test_bit() | spin_trylock()
. | .
Consider the following sequence of events:
CPU 0 reorder test_bit() ahead and see MISSED = 0
CPU 1 calls set_bit()
CPU 1 calls spin_trylock() and return fail
CPU 0 executes spin_unlock()
At the end of the sequence, CPU 0 calls spin_unlock() and does nothing
because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one
take it, until the next cpu pushing to the qdisc (if ever ...) will
notice and dequeue it.
This patch fix this by adding one explicit barrier. As spin_unlock() and
test_bit() ordering is a store-load ordering, a full memory barrier
smp_mb() is needed here.
Fixes: a90c57f2ce ("net: sched: fix packet stuck problem for lockless qdisc")
Signed-off-by: Guoju Fang <gjfang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220528101628.120193-1-gjfang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the conntrack is clashing, insertion can free skb->_nfct and
set skb->_nfct to the already-confirmed entry.
This wasn't found before because the conntrack entry and the extension
space used to free'd after an rcu grace period, plus the race needs
events enabled to trigger.
Reported-by: <syzbot+793a590957d9c1b96620@syzkaller.appspotmail.com>
Fixes: 71d8c47fc6 ("netfilter: conntrack: introduce clash resolution on insertion race")
Fixes: 2ad9d7747c ("netfilter: conntrack: free extension area immediately")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit()
does not provide any ordering guarantee as test_bit() is not an atomic
operation. This, added to the fact that the spin_trylock() call at
the beginning of qdisc_run_begin() does not guarantee acquire
semantics if it does not grab the lock, makes it possible for the
following statement :
if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))
to be executed before an enqueue operation called before
qdisc_run_begin().
As a result the following race can happen :
CPU 1 CPU 2
qdisc_run_begin() qdisc_run_begin() /* true */
set(MISSED) .
/* returns false */ .
. /* sees MISSED = 1 */
. /* so qdisc not empty */
. __qdisc_run()
. .
. pfifo_fast_dequeue()
----> /* may be done here */ .
| . clear(MISSED)
| . .
| . smp_mb __after_atomic();
| . .
| . /* recheck the queue */
| . /* nothing => exit */
| enqueue(skb1)
| .
| qdisc_run_begin()
| .
| spin_trylock() /* fail */
| .
| smp_mb__before_atomic() /* not enough */
| .
---- if (test_bit(MISSED))
return false; /* exit */
In the above scenario, CPU 1 and CPU 2 both try to grab the
qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the
bypass code path, where it emits its skb then calls __qdisc_run().
CPU1 fails, sets MISSED and goes down the traditionnal enqueue() +
dequeue() code path. But when executing qdisc_run_begin() for the
second time, after enqueuing its skbuff, it sees the MISSED bit still
set (by itself) and consequently chooses to exit early without setting
it again nor trying to grab the spinlock again.
Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue
and found it empty, so it returned.
At the end of the sequence, we end up with skb1 enqueued in the
backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set,
and no __netif_schedule() called made. skb1 will now linger in the
qdisc until somebody later performs a full __qdisc_run(). Associated
to the bypass capacity of the qdisc, and the ability of the TCP layer
to avoid resending packets which it knows are still in the qdisc, this
can lead to serious traffic "holes" in a TCP connection.
We fix this by replacing the smp_mb__before_atomic() / test_bit() /
set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin()
by a single test_and_set_bit() call, which is more concise and
enforces the needed memory barriers.
Fixes: 89837eb4b2 ("net: sched: add barrier to ensure correct ordering for lockless qdisc")
Signed-off-by: Vincent Ray <vray@kalrayinc.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AMT_MSG_TEARDOWM is defined,
But it should be AMT_MSG_TEARDOWN.
Fixes: b9022b53ad ("amt: add control plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add support for Realtek 8761BUV
- Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
- Add support for RTL8852C
- Add a new PID/VID 0489/e0c8 for MT7921
- Add support for Qualcomm WCN785x
-----BEGIN PGP SIGNATURE-----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=XFUz
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Realtek 8761BUV
- Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
- Add support for RTL8852C
- Add a new PID/VID 0489/e0c8 for MT7921
- Add support for Qualcomm WCN785x
* tag 'for-net-next-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (26 commits)
Bluetooth: hci_sync: use hci_skb_event() helper
Bluetooth: eir: Add helpers for managing service data
Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan
Bluetooth: MGMT: Add conditions for setting HCI_CONN_FLAG_REMOTE_WAKEUP
Bluetooth: btmtksdio: fix the reset takes too long
Bluetooth: btmtksdio: fix possible FW initialization failure
Bluetooth: btmtksdio: fix use-after-free at btmtksdio_recv_event
Bluetooth: btbcm: Add entry for BCM4373A0 UART Bluetooth
Bluetooth: btusb: Add a new PID/VID 0489/e0c8 for MT7921
Bluetooth: btusb: Add 0x0bda:0x8771 Realtek 8761BUV devices
Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCA
Bluetooth: core: Fix missing power_on work cancel on HCI close
Bluetooth: btusb: add support for Qualcomm WCN785x
Bluetooth: protect le accept and resolv lists with hdev->lock
Bluetooth: use hdev lock for accept_list and reject_list in conn req
Bluetooth: use hdev lock in activate_scan for hci_is_adv_monitoring
Bluetooth: btrtl: Add support for RTL8852C
Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for QCA
Bluetooth: Print broken quirks
Bluetooth: HCI: Add HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk
...
====================
Link: https://lore.kernel.org/r/20220523204151.3327345-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most protocol-specific pointers in struct net_device are under
a respective ifdef. Wireless is the notable exception. Since
there's a sizable number of custom-built kernels for datacenter
workloads which don't build wireless it seems reasonable to
ifdefy those pointers as well.
While at it move IPv4 and IPv6 pointers up, those are special
for obvious reasons.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> # ieee802154
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have one tcp bind table (bhash) which hashes by port
number only. In the socket bind path, we check for bind conflicts by
traversing the specified port's inet_bind2_bucket while holding the
bucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()).
In instances where there are tons of sockets hashed to the same port
at different addresses, checking for a bind conflict is time-intensive
and can cause softirq cpu lockups, as well as stops new tcp connections
since __inet_inherit_port() also contests for the spinlock.
This patch proposes adding a second bind table, bhash2, that hashes by
port and ip address. Searching the bhash2 table leads to significantly
faster conflict resolution and less time holding the spinlock.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements a new struct bpf_func_proto, named
bpf_skc_to_mptcp_sock_proto. Define a new bpf_id BTF_SOCK_TYPE_MPTCP,
and a new helper bpf_skc_to_mptcp_sock(), which invokes another new
helper bpf_mptcp_sock_from_subflow() in net/mptcp/bpf.c to get struct
mptcp_sock from a given subflow socket.
v2: Emit BTF type, add func_id checks in verifier.c and bpf_trace.c,
remove build check for CONFIG_BPF_JIT
v5: Drop EXPORT_SYMBOL (Martin)
Co-developed-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220519233016.105670-2-mathew.j.martineau@linux.intel.com
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next, misc
updates and fallout fixes from recent Florian's code rewritting (from
last pull request):
1) Use new flowi4_l3mdev field in ip_route_me_harder(), from Martin Willi.
2) Avoid unnecessary GC with a timestamp in conncount, from William Tu
and Yifeng Sun.
3) Remove TCP conntrack debugging, from Florian Westphal.
4) Fix compilation warning in ctnetlink, from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: ctnetlink: fix up for "netfilter: conntrack: remove unconfirmed list"
netfilter: conntrack: remove pr_debug callsites from tcp tracker
netfilter: nf_conncount: reduce unnecessary GC
netfilter: Use l3mdev flow key when re-routing mangled packets
====================
Link: https://lore.kernel.org/r/20220519220206.722153-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Second set of patches for v5.19 and most likely the last one. rtw89
got support for 8852ce devices and mt76 now supports Wireless Ethernet
Dispatch.
Major changes:
cfg80211/mac80211
* support disabling EHT mode
rtw89
* add support for Realtek 8852ce devices
mt76
* Wireless Ethernet Dispatch support for flow offload
* non-standard VHT MCS10-11 support
* mt7921 AP mode support
* mt7921 ipv6 NS offload support
ath11k
* enable keepalive during WoWLAN suspend
* implement remain-on-channel support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmKGYt4RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuK2gf/ZswLtwE2CIwrEhz/Q0MDtxUvw8ulRhKl
d+1PC+bCd/VArMESjpu7le+WNAZ1OPBWdh1pgkDm8QpCQZYe7/hRED82DB/Jw3Cl
KmOx2nr6Xb4uEN+yjqZrSXzA+Hrysy24bCQRG2CJKjdToe/fwTuRiz8WIcPKtxio
b/d/Kz0LpSoHTlU1PzqIsXulN8QUKJA4kRw70rJHAlMJVYiTBuAD+AmXfbhHD8uX
t2CJDH2fykDd1CAWFQwcmI++2tS+xclYL81vDg3aEinQJ9aNcDz06qSE5qr2H+K5
lUYy42yc+ONkIIh8LlxrLgZie7oSmkrb7aA0Zc+F0SWp/B6ZO/k8FA==
=aILH
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
Second set of patches for v5.19 and most likely the last one. rtw89
got support for 8852ce devices and mt76 now supports Wireless Ethernet
Dispatch.
Major changes:
cfg80211/mac80211
- support disabling EHT mode
rtw89
- add support for Realtek 8852ce devices
mt76
- Wireless Ethernet Dispatch support for flow offload
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 ipv6 NS offload support
ath11k
- enable keepalive during WoWLAN suspend
- implement remain-on-channel support
* tag 'wireless-next-2022-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (135 commits)
iwlwifi: mei: fix potential NULL-ptr deref
iwlwifi: mei: clear the sap data header before sending
iwlwifi: mvm: remove vif_count
iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS
iwlwifi: mvm: add OTP info in case of init failure
iwlwifi: mvm: fix assert 1F04 upon reconfig
iwlwifi: fw: init SAR GEO table only if data is present
iwlwifi: mvm: clean up authorized condition
iwlwifi: mvm: use NULL instead of ERR_PTR when parsing wowlan status
iwlwifi: pcie: simplify MSI-X cause mapping
rtw89: pci: only mask out INT indicator register for disable interrupt v1
rtw89: convert rtw89_band to nl80211_band precisely
rtw89: 8852c: update txpwr tables to HALRF_027_00_052
rtw89: cfo: check mac_id to avoid out-of-bounds
rtw89: 8852c: set TX antenna path
rtw89: add ieee80211::sta_rc_update ops
wireless: Fix Makefile to be in alphabetical order
mac80211: refactor freeing the next_beacon
cfg80211: fix kernel-doc for cfg80211_beacon_data
mac80211: minstrel_ht: support ieee80211_rate_status
...
====================
Link: https://lore.kernel.org/r/20220519153334.8D051C385AA@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds helpers for accessing and appending service data (0x16) ad
type.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
TLS device offload copies sendfile data to a bounce buffer before
transmitting. It allows to maintain the valid MAC on TLS records when
the file contents change and a part of TLS record has to be
retransmitted on TCP level.
In many common use cases (like serving static files over HTTPS) the file
contents are not changed on the fly. In many use cases breaking the
connection is totally acceptable if the file is changed during
transmission, because it would be received corrupted in any case.
This commit allows to optimize performance for such use cases to
providing a new optional mode of TLS sendfile(), in which the extra copy
is skipped. Removing this copy improves performance significantly, as
TLS and TCP sendfile perform the same operations, and the only overhead
is TLS header/trailer insertion.
The new mode can only be enabled with the new socket option named
TLS_TX_ZEROCOPY_SENDFILE on per-socket basis. It preserves backwards
compatibility with existing applications that rely on the copying
behavior.
The new mode is safe, meaning that unsolicited modifications of the file
being sent can't break integrity of the kernel. The worst thing that can
happen is sending a corrupted TLS record, which is in any case not
forbidden when using regular TCP sockets.
Sockets other than TLS device offload are not affected by the new socket
option. The actual status of zerocopy sendfile can be queried with
sock_diag.
Performance numbers in a single-core test with 24 HTTPS streams on
nginx, under 100% CPU load:
* non-zerocopy: 33.6 Gbit/s
* zerocopy: 79.92 Gbit/s
CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
Signed-off-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220518092731.1243494-1-maximmi@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-05-18
1) Fix "disable_policy" flag use when arriving from different devices.
From Eyal Birger.
2) Fix error handling of pfkey_broadcast in function pfkey_process.
From Jiasheng Jiang.
3) Check the encryption module availability consistency in pfkey.
From Thomas Bartschies.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel-doc comment is formatted badly, resulting
in a warning:
include/net/cfg80211.h:1188: warning: bad line: [...]
Fix that.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently nf_conncount can trigger garbage collection (GC)
at multiple places. Each GC process takes a spin_lock_bh
to traverse the nf_conncount_list. We found that when testing
port scanning use two parallel nmap, because the number of
connection increase fast, the nf_conncount_count and its
subsequent call to __nf_conncount_add take too much time,
causing several CPU lockup. This happens when user set the
conntrack limit to +20,000, because the larger the limit,
the longer the list that GC has to traverse.
The patch mitigate the performance issue by avoiding unnecessary
GC with a timestamp. Whenever nf_conncount has done a GC,
a timestamp is updated, and beforce the next time GC is
triggered, we make sure it's more than a jiffies.
By doin this we can greatly reduce the CPU cycles and
avoid the softirq lockup.
To reproduce it in OVS,
$ ovs-appctl dpctl/ct-set-limits zone=1,limit=20000
$ ovs-appctl dpctl/ct-get-limits
At another machine, runs two nmap
$ nmap -p1- <IP>
$ nmap -p1- <IP>
Signed-off-by: William Tu <u9012063@gmail.com>
Co-authored-by: Yifeng Sun <pkusunyifeng@gmail.com>
Reported-by: Greg Rose <gvrose8192@gmail.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is no longer a macro, but an inlined function.
INET_MATCH() -> inet_match()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Olivier Hartkopp <socketcan@hartkopp.net>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
INET6_MATCH() runs without holding a lock on the socket.
We probably need to annotate most reads.
This patch makes INET6_MATCH() an inline function
to ease our changes.
v2: inline function only defined if IS_ENABLED(CONFIG_IPV6)
Change the name to inet6_match(), this is no longer a macro.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_request_bound_dev_if() reads sk->sk_bound_dev_if twice
while listener socket is not locked.
Another cpu could change this field under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while
this field can be changed by another thread.
Adds minimal annotations to avoid KCSAN splats for UDP.
Following patches will add more annotations to potential lockless readers.
BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg
write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0:
__ip6_datagram_connect+0x6e2/0x930 net/ipv6/datagram.c:221
ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272
inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576
__sys_connect_file net/socket.c:1900 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1917
__do_sys_connect net/socket.c:1927 [inline]
__se_sys_connect net/socket.c:1924 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:1924
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888136d47a94 of 4 bytes by task 7670 on cpu 1:
udpv6_sendmsg+0xc60/0x16e0 net/ipv6/udp.c:1436
inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:652
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0xffffff9b
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 7670 Comm: syz-executor.3 Tainted: G W 5.18.0-rc1-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
I chose to not add Fixes: tag because race has minor consequences
and stable teams busy enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the gro_max_size to exceed a value larger than 65536.
There weren't really any external limitations that prevented this other
than the fact that IPv4 only supports a 16 bit length field. Since we have
the option of adding a hop-by-hop header for IPv6 we can allow IPv6 to
exceed this value and for IPv4 and non-TCP flows we can cap things at 65536
via a constant rather than relying on gro_max_size.
[edumazet] limit GRO_MAX_SIZE to (8 * 65535) to avoid overflows.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6 tcp and gro stacks will soon be able to build big TCP packets,
with an added temporary Hop By Hop header.
If GSO is involved for these large packets, we need to remove
the temporary HBH header before segmentation happens.
v2: perform HBH removal from ipv6_gso_segment() instead of
skb_segment() (Alexander feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patches will need to add and remove local IPv6 jumbogram
options to enable BIG TCP.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
This is v2 including deadlock fix in conntrack ecache rework
reported by Jakub Kicinski.
The following patchset contains Netfilter updates for net-next,
mostly updates to conntrack from Florian Westphal.
1) Add a dedicated list for conntrack event redelivery.
2) Include event redelivery list in conntrack dumps of dying type.
3) Remove per-cpu dying list for event redelivery, not used anymore.
4) Add netns .pre_exit to cttimeout to zap timeout objects before
synchronize_rcu() call.
5) Remove nf_ct_unconfirmed_destroy.
6) Add generation id for conntrack extensions for conntrack
timeout and helpers.
7) Detach timeout policy from conntrack on cttimeout module removal.
8) Remove __nf_ct_unconfirmed_destroy.
9) Remove unconfirmed list.
10) Remove unconditional local_bh_disable in init_conntrack().
11) Consolidate conntrack iterator nf_ct_iterate_cleanup().
12) Detect if ctnetlink listeners exist to short-circuit event
path early.
13) Un-inline nf_ct_ecache_ext_add().
14) Add nf_conntrack_events autodetect ctnetlink listener mode
and make it default.
15) Add nf_ct_ecache_exist() to check for event cache extension.
16) Extend flowtable reverse route lookup to include source, iif,
tos and mark, from Sven Auhagen.
17) Do not verify zero checksum UDP packets in nf_reject,
from Kevin Mitchell.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the new struct ieee80211_rate_status and replaces
'struct rate_info *rate' in ieee80211_tx_status with pointer and length
annotation.
The struct ieee80211_rate_status allows to:
(1) receive tx power status feedback for transmit power control (TPC)
per packet or packet retry
(2) dynamic mapping of wifi chip specific multi-rate retry (mrr)
chains with different lengths
(3) increase the limit of annotatable rate indices to support
IEEE802.11ac rate sets and beyond
ieee80211_tx_info, control and status buffer, and ieee80211_tx_rate
cannot be used to achieve these goals due to fixed size limitations.
Our new struct contains a struct rate_info to annotate the rate that was
used, retry count of the rate and tx power. It is intended for all
information related to RC and TPC that needs to be passed from driver to
mac80211 and its RC/TPC algorithms like Minstrel_HT. It corresponds to
one stage in an mrr. Multiple subsequent instances of this struct can be
included in struct ieee80211_tx_status via a pointer and a length variable.
Those instances can be allocated on-stack. The former reference to a single
instance of struct rate_info is replaced with our new annotation.
An extension is introduced to struct ieee80211_hw. There are two new
members called 'tx_power_levels' and 'max_txpwr_levels_idx' acting as a
tx power level table. When a wifi device is registered, the driver shall
supply all supported power levels in this list. This allows to support
several quirks like differing power steps in power level ranges or
alike. TPC can use this for algorithm and thus be designed more abstract
instead of handling all possible step widths individually.
Further mandatory changes in status.c, mt76 and ath11k drivers due to the
removal of 'struct rate_info *rate' are also included.
status.c already uses the information in ieee80211_tx_status->rate in
radiotap, this is now changed to use ieee80211_rate_status->rate_idx.
mt76 driver already uses struct rate_info to pass the tx rate to status
path. The new members of the ieee80211_tx_status are set to NULL and 0
because the previously passed rate is not relevant to rate control and
accurate information is passed via tx_info->status.rates.
For ath11k, the txrate can be passed via this struct because ath11k uses
firmware RC and thus the information does not interfere with software RC.
Compile-Tested: current wireless-next tree with all flags on
Tested-on: Xiaomi 4A Gigabit (MediaTek MT7603E, MT7612E) with OpenWrt
Linux 5.10.113
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://lore.kernel.org/r/20220509173958.1398201-2-jelonek.jonas@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_ATTR_HE_BSS_COLOR attribute can be included in both
NL80211_CMD_START_AP and NL80211_CMD_SET_BEACON commands.
Move he_bss_color from cfg80211_ap_settings to cfg80211_beacon_data
and parse NL80211_ATTR_HE_BSS_COLOR as a part of nl80211_parse_beacon()
to have bss color settings parsed for both start ap and set beacon
commands.
Add a new flag he_bss_color_valid to indicate whether
NL80211_ATTR_HE_BSS_COLOR attribute is included.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/1649867295-7204-2-git-send-email-quic_ramess@quicinc.com
[fix build ...]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In IPv4 setting the "disable_policy" flag on a device means no policy
should be enforced for traffic originating from the device. This was
implemented by seting the DST_NOPOLICY flag in the dst based on the
originating device.
However, dsts are cached in nexthops regardless of the originating
devices, in which case, the DST_NOPOLICY flag value may be incorrect.
Consider the following setup:
+------------------------------+
| ROUTER |
+-------------+ | +-----------------+ |
| ipsec src |----|-|ipsec0 | |
+-------------+ | |disable_policy=0 | +----+ |
| +-----------------+ |eth1|-|-----
+-------------+ | +-----------------+ +----+ |
| noipsec src |----|-|eth0 | |
+-------------+ | |disable_policy=1 | |
| +-----------------+ |
+------------------------------+
Where ROUTER has a default route towards eth1.
dst entries for traffic arriving from eth0 would have DST_NOPOLICY
and would be cached and therefore can be reused by traffic originating
from ipsec0, skipping policy check.
Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead
of the DST in IN/FWD IPv4 policy checks.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-05-13
1) Cleanups for the code behind the XFRM offload API. This is a
preparation for the extension of the API for policy offload.
From Leon Romanovsky.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: drop not needed flags variable in XFRM offload struct
net/mlx5e: Use XFRM state direction instead of flags
netdevsim: rely on XFRM state direction instead of flags
ixgbe: propagate XFRM offload state direction instead of flags
xfrm: store and rely on direction to construct offload flags
xfrm: rename xfrm_state_offload struct to allow reuse
xfrm: delete not used number of external headers
xfrm: free not used XFRM_ESP_NO_TRAILER flag
====================
Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The checksum is optional for UDP packets. However nf_reject would
previously require a valid checksum to elicit a response such as
ICMP_DEST_UNREACH.
Add some logic to nf_reject_verify_csum to determine if a UDP packet has
a zero checksum and should therefore not be verified.
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The pointer check usually results in a 'false positive': its likely
that the ctnetlink module is loaded but no event monitoring is enabled.
After recent change to autodetect ctnetlink usage and only allocate
the ecache extension if a listener is active, check if the extension
is present on a given conntrack.
If its not there, there is nothing to report and calls to the
notification framework can be elided.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only called when new ct is allocated or the extension isn't present.
This function will be extended, place this in the conntrack module
instead of inlining.
The callers already depend on nf_conntrack module.
Return value is changed to bool, noone used the returned pointer.
Make sure that the core drops the newly allocated conntrack
if the extension is requested but can't be added.
This makes it necessary to ifdef the section, as the stub
always returns false we'd drop every new conntrack if the
the ecache extension is disabled in kconfig.
Add from data path (xt_CT, nft_ct) is unchanged.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At this time, every new conntrack gets the 'event cache extension'
enabled for it.
This is because the 'net.netfilter.nf_conntrack_events' sysctl defaults
to 1.
Changing the default to 0 means that commands that rely on the event
notification extension, e.g. 'conntrack -E' or conntrackd, stop working.
We COULD detect if there is a listener by means of
'nfnetlink_has_listeners()' and only add the extension if this is true.
The downside is a dependency from conntrack module to nfnetlink module.
This adds a different way: inc/dec a counter whenever a ctnetlink group
is being (un)subscribed and toggle a flag in struct net.
Next patches will take advantage of this and will only add the event
extension if the flag is set.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a structure to collect all the context data that is
passed to the cleanup iterator.
struct nf_ct_iter_data {
struct net *net;
void *data;
u32 portid;
int report;
};
There is a netns field that allows to clean up conntrack entries
specifically owned by the specified netns.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Multiple netfilter extensions store pointers to external data
in their extension area struct.
Examples:
1. Timeout policies
2. Connection tracking helpers.
No references are taken for these.
When a helper or timeout policy is removed, the conntrack table gets
traversed and affected extensions are cleared.
Conntrack entries not yet in the hashtable are referenced via a special
list, the unconfirmed list.
On removal of a policy or connection tracking helper, the unconfirmed
list gets traversed an all entries are marked as dying, this prevents
them from getting committed to the table at insertion time: core checks
for dying bit, if set, the conntrack entry gets destroyed at confirm
time.
The disadvantage is that each new conntrack has to be added to the percpu
unconfirmed list, and each insertion needs to remove it from this list.
The list is only ever needed when a policy or helper is removed -- a rare
occurrence.
Add a generation ID count: Instead of adding to the list and then
traversing that list on policy/helper removal, increment a counter
that is stored in the extension area.
For unconfirmed conntracks, the extension has the genid valid at ct
allocation time.
Removal of a helper/policy etc. increments the counter.
At confirmation time, validate that ext->genid == global_id.
If the stored number is not the same, do not allow the conntrack
insertion, just like as if a confirmed-list traversal would have flagged
the entry as dying.
After insertion, the genid is no longer relevant (conntrack entries
are now reachable via the conntrack table iterators and is set to 0.
This allows removal of the percpu unconfirmed list.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This helper tags connections not yet in the conntrack table as
dying. These nf_conn entries will be dropped instead when the
core attempts to insert them from the input or postrouting
'confirm' hook.
After the previous change, the entries get unlinked from the
list earlier, so that by the time the actual exit hook runs,
new connections no longer have a timeout policy assigned.
Its enough to walk the hashtable instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Make it so netns pre_exit unlinks the objects from the pernet list, so
they cannot be found anymore.
netns core issues a synchronize_rcu() before calling the exit hooks so
any the time the exit hooks run unconfirmed nf_conn entries have been
free'd or they have been committed to the hashtable.
The exit hook still tags unconfirmed entries as dying, this can
now be removed in a followup change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its no longer needed. Entries that need event redelivery are placed
on the new pernet dying list.
The advantage is that there is no need to take additional spinlock on
conntrack removal unless event redelivery failed or the conntrack entry
was never added to the table in the first place (confirmed bit not set).
The IPS_CONFIRMED bit now needs to be set as soon as the entry has been
unlinked from the unconfirmed list, else the destroy function may
attempt to unlink it a second time.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The new pernet dying list includes conntrack entries that await
delivery of the 'destroy' event via ctnetlink.
The old percpu dying list will be removed soon.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This disentangles event redelivery and the percpu dying list.
Because entries are now stored on a dedicated list, all
entries are in NFCT_ECACHE_DESTROY_FAIL state and all entries
still have confirmed bit set -- the reference count is at least 1.
The 'struct net' back-pointer can be removed as well.
The pcpu dying list will be removed eventually, it has no functionality.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commits:
0dad4087a8 ("tcp/dccp: get rid of inet_twsk_purge()")
d507204d3c ("tcp/dccp: add tw->tw_bslot")
As Leonard pointed out, a newly allocated netns can happen
to reuse a freed 'struct net'.
While TCP TW timers were covered by my patches, other things were not:
1) Lookups in rx path (INET_MATCH() and INET6_MATCH()), as they look
at 4-tuple plus the 'struct net' pointer.
2) /proc/net/tcp[6] and inet_diag, same reason.
3) hashinfo->bhash[], same reason.
Fixing all this seems risky, lets instead revert.
In the future, we might have a per netns tcp hash table, or
a per netns list of timewait sockets...
Fixes: 0dad4087a8 ("tcp/dccp: get rid of inet_twsk_purge()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
INET_MATCH() runs without holding a lock on the socket.
We probably need to annotate most reads.
This patch makes INET_MATCH() an inline function
to ease our changes.
v2:
We remove the 32bit version of it, as modern compilers
should generate the same code really, no need to
try to be smarter.
Also make 'struct net *net' the first argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN quirk which can be
used to mark HCI_Enhanced_Setup_Synchronous_Connection as broken even
if its support command bit are set since some controller report it as
supported but the command don't work properly with some configurations
(e.g. BT_VOICE_TRANSPARENT/mSBC).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The listen sk is currently stored in two hash tables,
listening_hash (hashed by port) and lhash2 (hashed by port and address).
After commit 0ee58dad5b ("net: tcp6: prefer listeners bound to an address")
and commit d9fbc7f643 ("net: tcp: prefer listeners bound to an address"),
the TCP-SYN lookup fast path does not use listening_hash.
The commit 05c0b35709 ("tcp: seq_file: Replace listening_hash with lhash2")
also moved the seq_file (/proc/net/tcp) iteration usage from
listening_hash to lhash2.
There are still a few listening_hash usages left.
One of them is inet_reuseport_add_sock() which uses the listening_hash
to search a listen sk during the listen() system call. This turns
out to be very slow on use cases that listen on many different
VIPs at a popular port (e.g. 443). [ On top of the slowness in
adding to the tail in the IPv6 case ]. The latter patch has a
selftest to demonstrate this case.
This patch takes this chance to move all remaining listening_hash
usages to lhash2 and then retire listening_hash.
Since most changes need to be done together, it is hard to cut
the listening_hash to lhash2 switch into small patches. The
changes in this patch is highlighted here for the review
purpose.
1. Because of the listening_hash removal, lhash2 can use the
sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node.
This will also keep the sk_unhashed() check to work as is
after stop adding sk to listening_hash.
The union is removed from inet_listen_hashbucket because
only nulls_head is needed.
2. icsk->icsk_listen_portaddr_node and its helpers are removed.
3. The current lhash2 users needs to iterate with sk_nulls_node
instead of icsk_listen_portaddr_node.
One case is in the inet[6]_lhash2_lookup().
Another case is the seq_file iterator in tcp_ipv4.c.
One thing to note is sk_nulls_next() is needed
because the old inet_lhash2_for_each_icsk_continue()
does a "next" first before iterating.
4. Move the remaining listening_hash usage to lhash2
inet_reuseport_add_sock() which this series is
trying to improve.
inet_diag.c and mptcp_diag.c are the final two
remaining use cases and is moved to lhash2 now also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0ee58dad5b ("net: tcp6: prefer listeners bound to an address")
and commit d9fbc7f643 ("net: tcp: prefer listeners bound to an address"),
the count is no longer used. This patch removes it.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA has not supported (and probably will not support in the future
either) independent tagging protocols per CPU port.
Different switch drivers have different requirements, some may need to
replicate some settings for each CPU port, some may need to apply some
settings on a single CPU port, while some may have to configure some
global settings and then some per-CPU-port settings.
In any case, the current model where DSA calls ->change_tag_protocol for
each CPU port turns out to be impractical for drivers where there are
global things to be done. For example, felix calls dsa_tag_8021q_register(),
which makes no sense per CPU port, so it suppresses the second call.
Let drivers deal with replication towards all CPU ports, and remove the
CPU port argument from the function prototype.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the time - commit 7569459a52 ("net: dsa: manage flooding on the CPU
ports") - not introducing a dedicated switch callback for host flooding
made sense, because for the only user, the felix driver, there was
nothing different to do for the CPU port than set the flood flags on the
CPU port just like on any other bridge port.
There are 2 reasons why this approach is not good enough, however.
(1) Other drivers, like sja1105, support configuring flooding as a
function of {ingress port, egress port}, whereas the DSA
->port_bridge_flags() function only operates on an egress port.
So with that driver we'd have useless host flooding from user ports
which don't need it.
(2) Even with the felix driver, support for multiple CPU ports makes it
difficult to piggyback on ->port_bridge_flags(). The way in which
the felix driver is going to support host-filtered addresses with
multiple CPU ports is that it will direct these addresses towards
both CPU ports (in a sort of multicast fashion), then restrict the
forwarding to only one of the two using the forwarding masks.
Consequently, flooding will also be enabled towards both CPU ports.
However, ->port_bridge_flags() gets passed the index of a single CPU
port, and that leaves the flood settings out of sync between the 2
CPU ports.
This is to say, it's better to have a specific driver method for host
flooding, which takes the user port as argument. This solves problem (1)
by allowing the driver to do different things for different user ports,
and problem (2) by abstracting the operation and letting the driver do
whatever, rather than explicitly making the DSA core point to the CPU
port it thinks needs to be touched.
This new method also creates a problem, which is that cross-chip setups
are not handled. However I don't have hardware right now where I can
test what is the proper thing to do, and there isn't hardware compatible
with multi-switch trees that supports host flooding. So it remains a
problem to be tackled in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to dsa_user_ports() which retrieves a port mask of all user
ports, introduce dsa_cpu_ports() which retrieves the mask of all CPU
ports of a switch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set a size limit of 8 bytes of the written buffer to "hdev->name"
including the terminating null byte, as the size of "hdev->name" is 8
bytes. If an id value which is greater than 9999 is allocated,
then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)"
function call would lead to a truncation of the id value in decimal
notation.
Set an explicit maximum id parameter in the id allocation function call.
The id allocation function defines the maximum allocated id value as the
maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined
as 10000.
Signed-off-by: Itay Iellin <ieitayie@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently pedit tries to ensure that the accessed skb offset
is writable via skb_unclone(). The action potentially allows
touching any skb bytes, so it may end-up modifying shared data.
The above causes some sporadic MPTCP self-test failures, due to
this code:
tc -n $ns2 filter add dev ns2eth$i egress \
protocol ip prio 1000 \
handle 42 fw \
action pedit munge offset 148 u8 invert \
pipe csum tcp \
index 100
The above modifies a data byte outside the skb head and the skb is
a cloned one, carrying a TCP output packet.
This change addresses the issue by keeping track of a rough
over-estimate highest skb offset accessed by the action and ensuring
such offset is really writable.
Note that this may cause performance regressions in some scenarios,
but hopefully pedit is not in the critical path.
Fixes: db2c24175d ("act_pedit: access skb->data safely")
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/1fcf78e6679d0a287dd61bb0f04730ce33b3255d.1652194627.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This config option enables network debugging checks.
This patch adds DEBUG_NET_WARN_ON_ONCE(cond)
Note that this is not a replacement for WARN_ON_ONCE(cond)
as (cond) is not evaluated if CONFIG_DEBUG_NET is not set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove from include/linux/netdevice.h helpers
that send debug/info/warnings to syslog.
We plan adding more helpers in following patches.
v2: added two includes, and 'struct net_device' forward declaration
to avoid compile errors (kernel bots)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All the users of these functions are gone, delete them before they gain
new ones.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After drivers were converted to rely on direction, the flags is not
used anymore and can be removed.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
XFRM state doesn't need anything from flags except to understand
direction, so store it separately. For future patches, such change
will allow us to reuse xfrm_dev_offload for policy offload too, which
has three possible directions instead of two.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The struct xfrm_state_offload has all fields needed to hold information
for offloaded policies too. In order to do not create new struct with
same fields, let's rename existing one and reuse it later.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
num_exthdrs is set but never used, so delete it.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After removal of Innova IPsec support from mlx5 driver, the last user
of this XFRM_ESP_NO_TRAILER was gone too. This means that we can safely
remove it as no other hardware is capable (or need) to remove ESP trailer.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The MPTCP RFC requires that the MPTCP-level receive window's
right edge never moves backward. Currently the MPTCP code
enforces such constraint while tracking the right edge, but it
does not reflects it on the wire, as MPTCP lacks a suitable hook
to update accordingly the TCP header.
This change modifies the existing mptcp_write_options() hook,
providing the current packet's TCP header to the MPTCP protocol,
so that the next patch could implement the above mentioned
constraint.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We haven't used this function for years, since commit c781944b71
("cfg80211: Remove unused cfg80211_can_use_iftype_chan()") which
itself removed a function unused since commit 97dc94f1d9
("cfg80211: remove channel_switch combination check"), almost eight
years ago.
Also remove the now unused enum cfg80211_chan_mode and some struct
members that were only used for this function.
Link: https://lore.kernel.org/r/20220412220958.1a191dca19d7.Ide4448f02d0e2f1ca2992971421ffc1933a5370a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
* wfx: silicon labs devices
* plfxlc: pureLiFi X, XL, XC devices
mac80211
* host based BSS color collision detection
* prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
* support TP-Link T2E devices
rtw89
* support firmware crash simulation
* preparation for 8852ce hardware support
ath11k
* Wake-on-WLAN support for QCA6390 and WCN6855
* device recovery (firmware restart) support for QCA6390 and WCN6855
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
wcn36xx
* support for transmit rate reporting to user space
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJxS2sRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuNgwf9H2oxMKLKrlFoX1qHtNBwZuHS6IERhOkM
NI9DjS4MCyiUSbA5r3sWlpqXQeKIbG/05gUZ6Y0ircGFwnAGjZ6isPwo8pKFgbh5
QljXQjUTHbkshrXW8K+VGJxw4F1oiPlOGUDVdXPy2FLx5ZvBlaUV2rWQUzsWX9I0
EnrM6ygHBVejVYDe+JSkb1gzb/07xuZN410IJPuZTPKJfYiE0oGU3zpTbExFitaz
ObjfFUWqHrVue525WFAJ9Dbk8kYEKyMThr7rkkWekYJjujJLJo0qhEiZVZu0eEsk
Vq4PdKmQAqlgbShQ/3Mv8BRsSH2wy62+zKjPWL+8t4Gmm9DbLu+++A==
=T7Ii
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
- wfx: silicon labs devices
- plfxlc: pureLiFi X, XL, XC devices
mac80211
- host based BSS color collision detection
- prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
- support TP-Link T2E devices
rtw89
- support firmware crash simulation
- preparation for 8852ce hardware support
ath11k
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support for QCA6390 and WCN6855
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- support for WCN6750
wcn36xx
- support for transmit rate reporting to user space
* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
rtw89: 8852c: rfk: add DPK
rtw89: 8852c: rfk: add IQK
rtw89: 8852c: rfk: add RX DCK
rtw89: 8852c: rfk: add RCK
rtw89: 8852c: rfk: add TSSI
rtw89: 8852c: rfk: add LCK
rtw89: 8852c: rfk: add DACK
rtw89: 8852c: rfk: add RFK tables
plfxlc: fix le16_to_cpu warning for beacon_interval
rtw88: remove a copy of the NAPI_POLL_WEIGHT define
carl9170: tx: fix an incorrect use of list iterator
wil6210: use NAPI_POLL_WEIGHT for napi budget
ath10k: remove a copy of the NAPI_POLL_WEIGHT define
ath11k: Add support for WCN6750 device
ath11k: Datapath changes to support WCN6750
ath11k: HAL changes to support WCN6750
ath11k: Add QMI changes for WCN6750
ath11k: Fetch device information via QMI for WCN6750
ath11k: Add register access logic for WCN6750
ath11k: Add HW params for WCN6750
...
====================
Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
pull-request: ieee802154-next 2022-05-01
Miquel Raynal landed two patch series bundled in this pull request.
The first series re-works the symbol duration handling to better
accommodate the needs of the various phy layers in ieee802154.
In the second series Miquel improves th errors handling from drivers
up mac802154. THis streamlines the error handling throughout the
ieee/mac802154 stack in preparation for sync TX to be introduced for
MLME frames.
====================
Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_alloc_send_skb() is simple and just proxying to another function,
so we can inline it and cut associated overhead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix regression causing some HCI events to be discarded when they
shouldn't.
-----BEGIN PGP SIGNATURE-----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=sidM
-----END PGP SIGNATURE-----
Merge tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression causing some HCI events to be discarded when they
shouldn't.
* tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
====================
Link: https://lore.kernel.org/r/20220427234031.1257281-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2022-04-27
We've added 5 non-merge commits during the last 20 day(s) which contain
a total of 6 files changed, 34 insertions(+), 12 deletions(-).
The main changes are:
1) Fix xsk sockets when rx and tx are separately bound to the same umem, also
fix xsk copy mode combined with busy poll, from Maciej Fijalkowski.
2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered
a crash due to invalid metadata_dst access, from Eyal Birger.
3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen.
4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki.
(Masami & Steven preferred this small fix to be routed via bpf tree given it's
follow-up fix to Masami's rethook work that went via bpf earlier, too.)
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix possible crash when multiple sockets are created
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
bpf: Fix release of page_pool in BPF_PROG_RUN in test runner
xsk: Fix l2fwd for copy mode + busy poll combo
====================
Link: https://lore.kernel.org/r/20220427212748.9576-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Logic added in commit f35f821935 ("tcp: defer skb freeing after socket
lock is released") helped bulk TCP flows to move the cost of skbs
frees outside of critical section where socket lock was held.
But for RPC traffic, or hosts with RFS enabled, the solution is far from
being ideal.
For RPC traffic, recvmsg() has to return to user space right after
skb payload has been consumed, meaning that BH handler has no chance
to pick the skb before recvmsg() thread. This issue is more visible
with BIG TCP, as more RPC fit one skb.
For RFS, even if BH handler picks the skbs, they are still picked
from the cpu on which user thread is running.
Ideally, it is better to free the skbs (and associated page frags)
on the cpu that originally allocated them.
This patch removes the per socket anchor (sk->defer_list) and
instead uses a per-cpu list, which will hold more skbs per round.
This new per-cpu list is drained at the end of net_action_rx(),
after incoming packets have been processed, to lower latencies.
In normal conditions, skbs are added to the per-cpu list with
no further action. In the (unlikely) cases where the cpu does not
run net_action_rx() handler fast enough, we use an IPI to raise
NET_RX_SOFTIRQ on the remote cpu.
Also, we do not bother draining the per-cpu list from dev_cpu_dead()
This is because skbs in this list have no requirement on how fast
they should be freed.
Note that we can add in the future a small per-cpu cache
if we see any contention on sd->defer_lock.
Tested on a pair of hosts with 100Gbit NIC, RFS enabled,
and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around
page recycling strategy used by NIC driver (its page pool capacity
being too small compared to number of skbs/pages held in sockets
receive queues)
Note that this tuning was only done to demonstrate worse
conditions for skb freeing for this particular test.
These conditions can happen in more general production workload.
10 runs of one TCP_STREAM flow
Before:
Average throughput: 49685 Mbit.
Kernel profiles on cpu running user thread recvmsg() show high cost for
skb freeing related functions (*)
57.81% [kernel] [k] copy_user_enhanced_fast_string
(*) 12.87% [kernel] [k] skb_release_data
(*) 4.25% [kernel] [k] __free_one_page
(*) 3.57% [kernel] [k] __list_del_entry_valid
1.85% [kernel] [k] __netif_receive_skb_core
1.60% [kernel] [k] __skb_datagram_iter
(*) 1.59% [kernel] [k] free_unref_page_commit
(*) 1.16% [kernel] [k] __slab_free
1.16% [kernel] [k] _copy_to_iter
(*) 1.01% [kernel] [k] kfree
(*) 0.88% [kernel] [k] free_unref_page
0.57% [kernel] [k] ip6_rcv_core
0.55% [kernel] [k] ip6t_do_table
0.54% [kernel] [k] flush_smp_call_function_queue
(*) 0.54% [kernel] [k] free_pcppages_bulk
0.51% [kernel] [k] llist_reverse_order
0.38% [kernel] [k] process_backlog
(*) 0.38% [kernel] [k] free_pcp_prepare
0.37% [kernel] [k] tcp_recvmsg_locked
(*) 0.37% [kernel] [k] __list_add_valid
0.34% [kernel] [k] sock_rfree
0.34% [kernel] [k] _raw_spin_lock_irq
(*) 0.33% [kernel] [k] __page_cache_release
0.33% [kernel] [k] tcp_v6_rcv
(*) 0.33% [kernel] [k] __put_page
(*) 0.29% [kernel] [k] __mod_zone_page_state
0.27% [kernel] [k] _raw_spin_lock
After patch:
Average throughput: 73076 Mbit.
Kernel profiles on cpu running user thread recvmsg() looks better:
81.35% [kernel] [k] copy_user_enhanced_fast_string
1.95% [kernel] [k] _copy_to_iter
1.95% [kernel] [k] __skb_datagram_iter
1.27% [kernel] [k] __netif_receive_skb_core
1.03% [kernel] [k] ip6t_do_table
0.60% [kernel] [k] sock_rfree
0.50% [kernel] [k] tcp_v6_rcv
0.47% [kernel] [k] ip6_rcv_core
0.45% [kernel] [k] read_tsc
0.44% [kernel] [k] _raw_spin_lock_irqsave
0.37% [kernel] [k] _raw_spin_lock
0.37% [kernel] [k] native_irq_return_iret
0.33% [kernel] [k] __inet6_lookup_established
0.31% [kernel] [k] ip6_protocol_deliver_rcu
0.29% [kernel] [k] tcp_rcv_established
0.29% [kernel] [k] llist_reverse_order
v2: kdoc issue (kernel bots)
do not defer if (alloc_cpu == smp_processor_id()) (Paolo)
replace the sk_buff_head with a single-linked list (Jakub)
add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attempts to cleanup the hci_conn if it cannot be aborted as
otherwise it would likely result in having the controller and host
stack out of sync with respect to connection handle.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Commit d5ebaa7c5f introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range int case of error status:
> HCI Event: Connect Complete (0x03) plen 11
Status: Page Timeout (0x04)
Handle: 65535
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
[1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle
Because of it is impossible to cleanup the connections properly since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
= bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice
gateway SDP record: Connection timed out
> HCI Event: Command Complete (0x0e) plen 10
Create Connection Cancel (0x01|0x0008) ncmd 1
Status: Unknown Connection Identifier (0x02)
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6
Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment&
Sound Products Inc)
Fixes: d5ebaa7c5f ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
A few drivers do the full transmit operation asynchronously, which means
that a bus error that happens when forwarding the packet to the
transmitter or a timeout happening when offloading the request to the
transmitter will not be reported immediately.
The solution in this case is to call this new helper to free the
necessary resources, restart the queue and always return the same
generic TRAC error code: IEEE802154_SYSTEM_ERROR.
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
So far there is only a helper for successful transmissions, which led
device drivers to implement their own handling in case of
error. Unfortunately, we really need all the drivers to give the hand
back to the core once they are done in order to be able to build a
proper synchronous API. So let's create a _xmit_error() helper and take
this opportunity to fill the new device-global field storing Tx
statuses.
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
I had this bug sitting for too long in my pile, it is time to fix it.
Thanks to Doug Porter for reminding me of it!
We had various attempts in the past, including commit
0cbe6a8f08 ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.
If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.
What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.
This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.
In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.
Tested:
200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]
$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
echo $V
SUM=$(($SUM + $V))
done
echo SUM=$SUM
Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000
After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000 # This is 410 % of the value before patch.
Fixes: c9bee3b7fd ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Doug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the
following sequence of events:
1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
add ... external". "ip" ignores "[o]seq" if "external" is specified,
so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:
gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
(flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
: 0); ^^^^^^^^^^^^^^^^^
Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by
making o_seqno atomic_t.
As mentioned by Eric Dumazet in commit b790e01aee ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.
Maybe a better fix would be:
1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if
they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
with "oseq".
Unfortunately, that would break userspace.
We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a80 ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the driver to provide per line card info get op to fill-up info,
similar to the "devlink dev info".
Example:
$ devlink lc info pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8
versions:
fixed:
hw.revision 0
running:
ini.version 4
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Line card can contain one or more devices that makes sense to make
visible to the user. For example, this can be a gearbox with
flash memory, which could be updated.
Provide the driver possibility to attach such devices to a line card
and expose those to user.
Example:
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
devices:
device 0
device 1
device 2
device 3
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the infinite mapping sending logic.
Add a new flag send_infinite_map in struct mptcp_subflow_context. Set
it true when a single contiguous subflow is in use and the
allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received().
In mptcp_sendmsg_frag(), if this flag is true, call the new function
mptcp_update_infinite_map() to set the infinite mapping.
Add a new flag infinite_map in struct mptcp_ext, set it true in
mptcp_update_infinite_map(), and check this flag in a new helper
mptcp_check_infinite_map().
In mptcp_update_infinite_map(), set data_len to 0, and clear the
send_infinite_map flag, then do fallback.
In mptcp_established_options(), use the helper mptcp_check_infinite_map()
to let the infinite mapping DSS can be sent out in the fallback mode.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.
We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.
Fixes: b9f64820fb ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally,
we don't have to rely on the RTO_ONLINK bit to properly set the scope
of a flowi4 structure. We can just set ->flowi4_scope explicitly and
avoid using RTO_ONLINK in ->flowi4_tos.
This patch converts callers of ip_route_connect(). Instead of setting
the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can:
1- Drop the tos parameter from ip_route_connect(): its value was
entirely based on sk, which is also passed as parameter.
2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option
instead of always initialising it with RT_SCOPE_UNIVERSE (let's
define ip_sock_rt_scope() for this purpose).
3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is
now properly initialised, we don't need to tell ip_rt_fix_tos() to
adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(),
which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK
bit overload.
Note:
In the original ip_route_connect() code, __ip_route_output_key()
might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of
ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the
original tos variable. Now that we don't set RTO_ONLINK any more,
this is not a problem and we can use fl4->flowi4_tos in
flowi4_update_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our customers in the fiber telecom world have network configurations
where they would like to control their traffic according to the number
of tags appearing in the packet.
For example, TR247 GPON conformance test suite specification mostly
talks about untagged, single, double tagged packets and gives lax
guidelines on the vlan protocol vs. number of vlan tags.
This is different from the common IT networks where 802.1Q and 802.1ad
protocols are usually describe single and double tagged packet. GPON
configurations that we work with have arbitrary mix the above protocols
and number of vlan tags in the packet.
The goal is to make the following TC commands possible:
tc filter add dev eth1 ingress flower \
num_of_vlans 1 vlan_prio 5 action drop
From our logs, we have redirect rules such that:
tc filter add dev $GPON ingress flower num_of_vlans $N \
action mirred egress redirect dev $DEV
where N can range from 0 to 3 and $DEV is the function of $N.
Also there are rules setting skb mark based on the number of vlans:
tc filter add dev $GPON ingress flower num_of_vlans $N vlan_prio \
$P action skbedit mark $M
This new dissector allows extracting the number of vlan tags existing in
the packet.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to properly inform user about relationship between port and
line card, introduce a driver API to set line card for a port. Use this
information to extend port devlink netlink message by line card index
and also include the line card index into phys_port_name and by that
into a netdevice name.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow driver to mark a line card as active. Expose this state to the
userspace over devlink netlink interface with proper notifications.
'active' state means that line card was plugged in after
being provisioned.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to be able to configure all needed stuff on a port/netdevice
of a line card without the line card being present, introduce line card
provisioning. Basically by setting a type, provisioning process will
start and driver is supposed to create a placeholder for instances
(ports/netdevices) for a line card type.
Allow the user to query the supported line card types over line card
get command. Then implement two netlink command SET to allow user to
set/unset the card type.
On the driver API side, add provision/unprovision ops and supported
types array to be advertised. Upon provision op call, the driver should
take care of creating the instances for the particular line card type.
Introduce provision_set/clear() functions to be called by the driver
once the provisioning/unprovisioning is done on its side. These helpers
are not to be called directly due to the async nature of provisioning.
Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
lc 1 state unprovisioned
supported_types:
16x100G
lc 2 state unprovisioned
supported_types:
16x100G
lc 3 state unprovisioned
supported_types:
16x100G
lc 4 state unprovisioned
supported_types:
16x100G
lc 5 state unprovisioned
supported_types:
16x100G
lc 6 state unprovisioned
supported_types:
16x100G
lc 7 state unprovisioned
supported_types:
16x100G
lc 8 state unprovisioned
supported_types:
16x100G
$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
lc 8 state active type 16x100G
supported_types:
16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4
$ devlink lc set pci/0000:01:00.0 lc 8 notype
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the devlink API so the driver is going to be able to create and
destroy linecard instances. There can be multiple line cards per devlink
device. Expose this new type of object over devlink netlink API to the
userspace, with notifications.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reads and Writes to ip6_rt_gc_expire always have been racy,
as syzbot reported lately [1]
There is a possible risk of under-flow, leading
to unexpected high value passed to fib6_run_gc(),
although I have not observed this in the field.
Hosts hitting ip6_dst_gc() very hard are under pretty bad
state anyway.
[1]
BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc
read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1:
ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
dst_alloc+0x9b/0x160 net/core/dst.c:86
ip6_dst_alloc net/ipv6/route.c:344 [inline]
icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0:
ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
dst_alloc+0x9b/0x160 net/core/dst.c:86
ip6_dst_alloc net/ipv6/route.c:344 [inline]
icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
value changed: 0x00000bb3 -> 0x00000ba9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido reported that the commit referenced in the Fixes tag broke
a gre use case with dummy devices. Add a check to ip_tunnel_init_flow
to see if the oif is an l3mdev port and if so set the oif to 0 to
avoid the oif comparison in fib_lookup_good_nhc.
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-04-14
1) Fix the output interface for VRF cases in xfrm_dst_lookup.
From David Ahern.
2) Fix write out of bounds by doing COW on esp output when the
packet size is larger than a page.
From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce page_pool APIs to report stats through ethtool and reduce
duplicated code in each driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to
verify that the delete operation allows bulk object deletion. Also emit
a warning if anyone tries to set it for non-delete kind.
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper which extracts the msg type's kind using the kind mask (0x3).
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rtnl kind names instead of using raw values. We'll need to
check for DEL kind later to validate bulk flag support.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ebe48d368e ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.
This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().
Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.
err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
or in
err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the new dscp_t type to replace the tos field of struct
fib_entry_notifier_info. This ensures ECN bits are ignored and makes it
compatible with the dscp field of struct fib_rt_info.
This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
