This is a larger than normal update for Arm SoC specific code, most
of it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for several
defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect settings
in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Mrh2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a larger than normal update for Arm SoC specific code, most of
it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for
several defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect
settings in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes"
* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
ARM: sharpsl_param: work around -Wstringop-overread warning
ARM: defconfig: gemini: Restore framebuffer
ARM: dove: mark 'putc' as inline
ARM: omap1: move omap15xx local bus handling to usb.c
MAINTAINERS: Add Vignesh to TI K3 platform maintainership
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
...
Commit 38225f2ef2 ("ARM/omap1: switch to use dma_direct_set_offset for
lbus DMA offsets") removed a lot of mach/memory.h, but left the USB
offset handling split into arch/arm/mach-omap1/usb.c and
drivers/usb/host/ohci-omap.c.
This can cause a randconfig build warning that now fails the build
with -Werror:
arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable]
561 | static struct notifier_block omap_1510_usb_ohci_nb = {
| ^~~~~~~~~~~~~~~~~~~~~
Move it all into the platform file to get rid of the final
location that relies on mach/memory.h.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here's a fix for a regression affecting some CP2102 devices and a host
of new device ids.
Included are also a couple of cleanups of duplicate device ids, which
are also tagged for stable to keep the tables in sync, and a trivial
patch to help debugging cp210x issues.
All have been in linux-next with no reported issues. Note however that
the last last two device-id commits were rebased to fix up a lore link
in a commit message (as the patch itself never made it to the list).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYU2GxAAKCRALxc3C7H1l
CLzVAQCUyg9IUDizLyoMx0gWprMuzCCrN/H728XGRCsUcVCOlgD/Q+QRvWpt9zAX
qZ2upQJvPm1/8F3aYl+YoH4vnsEvJg8=
=6FW1
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.15-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.15-rc3
Here's a fix for a regression affecting some CP2102 devices and a host
of new device ids.
Included are also a couple of cleanups of duplicate device ids, which
are also tagged for stable to keep the tables in sync, and a trivial
patch to help debugging cp210x issues.
All have been in linux-next with no reported issues. Note however that
the last last two device-id commits were rebased to fix up a lore link
in a commit message (as the patch itself never made it to the list).
* tag 'usb-serial-5.15-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add device id for Foxconn T99W265
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: cp210x: add part-number debug printk
USB: serial: cp210x: fix dropped characters with CP2102
USB: serial: option: remove duplicate USB device ID
USB: serial: mos7840: remove duplicated 0xac24 device ID
USB: serial: option: add Telit LN920 compositions
Some CP2102 do not support event-insertion mode but return no error when
attempting to enable it.
This means that any event escape characters in the input stream will not
be escaped by the device and consequently regular data may be
interpreted as escape sequences and be removed from the stream by the
driver.
The reporter's device has batch number DCL00X etched into it and as
discovered by the SHA2017 Badge team, counterfeit devices with that
marking can be detected by sending malformed vendor requests. [1][2]
Tests confirm that the possibly counterfeit CP2102 returns a single byte
in response to a malformed two-byte part-number request, while an
original CP2102 returns two bytes. Assume that every CP2102 that behaves
this way also does not support event-insertion mode (e.g. cannot report
parity errors).
[1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418
[2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376
Reported-by: Malte Di Donato <malte@neo-soft.org>
Tested-by: Malte Di Donato <malte@neo-soft.org>
Fixes: a7207e9835 ("USB: serial: cp210x: add support for line-status events")
Cc: stable@vger.kernel.org # 5.9
Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel(). The last byte is always going to be
garbage. Zero out the last bytes instead.
Fixes: 550a7375fe ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has
broken tag handling, preventing the device from working at all:
usb 1-1: new full-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60
usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0
usb 1-1: Product: USB Device
usb 1-1: Manufacturer: USB Device
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
usb 1-1: reset full-speed USB device number 2 using uhci_hcd
Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address.
2.6c is the only firmware that claims Linux compatibility.
The firmware can be upgraded using ezotgdbg utility:
https://github.com/asciilifeform/ezotgdbg
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device ZTE 0x0094 is already on the list.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ec ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list.
Fixes: 27f1281d5f ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
For Isochronous endpoints, the SS companion descriptor's
wBytesPerInterval field is required to reserve bus time in order
to transmit the required payload during the service interval.
If left at 0, the UAC2 function is unable to transact data on its
playback or capture endpoints in SuperSpeed mode.
Since f_uac2 currently does not support any bursting this value can
be exactly equal to the calculated wMaxPacketSize.
Tested with Windows 10 as a host.
Fixes: f8cb3d556b ("usb: f_uac2: adds support for SS and SSP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The f_uac2 function fails to enumerate when connected in SuperSpeed
due to the feedback endpoint missing the companion descriptor.
Add a new ss_epin_fback_desc_comp descriptor and append it behind the
ss_epin_fback_desc both in the static definition of the ss_audio_desc
structure as well as its dynamic construction in setup_headers().
Fixes: 24f779dac8 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert BNA
interrupt. Both these interrupts are set while dwc2_hsotg_epint()
handler called. Each interrupt should be handled separately: first
XferComplete interrupt then BNA interrupt, otherwise last completed
transfer will not be giveback to function driver as completed
request.
Fixes: 729cac693e ("usb: dwc2: Change ISOC DDMA flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No functional change. Since configuration to stop HCD is invoked from
multiple places, group all of them in usb_stop_hcd().
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-4-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating system scheduling of client software can result in no
packet being transferred for a (micro)frame. An error indication
should be returned as status to the client software in such a case.
Current implementation in case of missed/dropped interval send same
data in next possible interval instead of reporting missed isoc.
This fix complete requests with -ENODATA if interval elapsed.
HSOTG core in BDMA and Slave modes haven't HW support for
(micro)frames tracking, this is why SW should care about tracking
of (micro)frames. Because of that method and consider operating
system scheduling delays, added few additional checking's of elapsed
target (micro)frame:
1. Immediately before enabling EP to start transfer.
2. With any transfer completion interrupt.
3. With incomplete isoc in/out interrupt.
4. With EP disabled interrupt because of incomplete transfer.
5. With OUT token received while EP disabled interrupt (for OUT
transfers).
6. With NAK replied to IN token interrupt (for IN transfers).
As part of ISOC flow, additionally fixed 'current' and 'target' frame
calculation functions. In HS mode SOF limits provided by DSTS register
is 0x3fff, but in non HS mode this limit is 0x7ff.
Tested by internal tool which also using for dwc3 testing.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After we start to do core soft reset while usb role switch,
the phy init is invoked at every switch to device mode, but
its counter part de-init is missing, this causes the actual
phy init can not be done when we really want to re-init phy
like system resume, because the counter maintained by phy
core is not 0. considering phy init is actually redundant for
role switch, so move out the phy init from core soft reset to
dwc3 core init where is the only place required.
Fixes: f88359e158 ("usb: dwc3: core: Do core softreset when switch mode")
Cc: <stable@vger.kernel.org>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Tested-by: John Stultz <john.stultz@linaro.org> #HiKey960
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit f3de5d857b.
That commit broke USB on all routers that have USB always powered on and
don't require toggling any GPIO. It's a majority of devices actually.
The original code worked and seemed safe: vcc GPIO is optional and
bcma_hci_platform_power_gpio() takes care of checking the pointer before
using it.
This revert fixes:
[ 10.801127] bcma_hcd: probe of bcma0:11 failed with error -2
Fixes: f3de5d857b ("USB: bcma: Add a check for devm_gpiod_get")
Cc: stable <stable@vger.kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210831065419.18371-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use platform_register_drivers() and platform_unregister_drivers() to
register and unregister ehci platform drivers. This simplifies the code
and prevents the following build errors seen with sparc:allmodconfig.
drivers/usb/host/ehci-hcd.c:1301: error:
"PLATFORM_DRIVER" redefined
drivers/usb/host/ehci-sh.c:173:31: error:
'ehci_hcd_sh_driver' defined but not used
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907123002.3951446-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the driver runs out of minor numbers it would release minor 0 and
allow another device to claim the minor while still in use.
Fortunately, registering the tty class device of the second device would
fail (with a stack dump) due to the sysfs name collision so no memory is
leaked.
Fixes: cae2bc768d ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For DEV_VER_V3 version there exist race condition between clearing
ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit.
Setting EP_CMD_DRDY will be ignored by controller when
EP_STS_TRBERR is set. So, between these two instructions we have
a small time gap in which the EP_STSS_TRBERR can be set. In such case
the transfer will not start after setting doorbell.
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org> # 5.12.x
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210907062619.34622-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts. But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.
This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.
Fixes: 96fe53ef54 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch increases the bitshift in feedback frequency
calculation with EP-OUT bInterval value.
Tests have revealed that Win10 and OSX UAC2 drivers require
the feedback frequency to be based on the actual packet
interval instead of on the USB2 microframe. Otherwise they
ignore the feedback value. Linux snd-usb-audio driver
detects the applied bitshift automatically.
Tested-by: Henrik Enquist <henrik.enquist@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some straggler USB-serial changes for 5.15-rc1.
These were not included in the first pull request as they came in "late"
from Johan and I had missed them in my pull request earlier this week.
Nothing big in here, just some USB to serial driver updates and fixes.
All of these were in linux-next before I pulled them into my tree, and
have been in linux-next all this week from my tree with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYTMQHA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn27ACeOFMj4BM0SnH69oxhXcbhIxpUEKIAoKugLy6O
8fm9N2JX//QBIMBPK3HJ
=Vz2y
-----END PGP SIGNATURE-----
Merge tag 'usb-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull more USB updates from Greg KH:
"Here are some straggler USB-serial changes for 5.15-rc1.
These were not included in the first pull request as they came in
"late" from Johan and I had missed them in my pull request earlier
this week.
Nothing big in here, just some USB to serial driver updates and fixes.
All of these were in linux-next before I pulled them into my tree, and
have been in linux-next all this week from my tree with no reported
problems"
* tag 'usb-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: fix GL type detection
USB: serial: replace symbolic permissions by octal permissions
USB: serial: cp210x: determine fw version for CP2105 and CP2108
USB: serial: cp210x: clean up type detection
USB: serial: cp210x: clean up set-chars request
USB: serial: cp210x: clean up control-request timeout
USB: serial: cp210x: fix flow-control error handling
USB: serial: cp210x: fix control-characters error handling
USB: serial: io_edgeport: drop unused descriptor helper
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
Here's a single fix for a pl2303 type detection regression, and which
has been in linux-next over night.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYS3+6wAKCRALxc3C7H1l
CPVDAQDpWis5sqJg4nr2Yfwneb7twKwojeUQACkavn07LJ8fbQEAk/rmL3bGpQZk
oi1WoN/nW93GzIYmVCljkDn0A7NwoAs=
=RCmO
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial fix for 5.15-rc1
Here's a single fix for a pl2303 type detection regression, and which
has been in linux-next over night.
* tag 'usb-serial-5.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: fix GL type detection
Here are the USB serial updates for 5.15-rc1, including:
- a couple of fixes for cp210x termios error handling
- retrieval of fw revisions for more cp210x types
- a switch to octal permissions for all module-parameter definitions
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYS4AWwAKCRALxc3C7H1l
CJKQAQDSpM2VZDmWApiAHXvICl+SxSOonAq+Ch7giDE/eEJ+wQD/QVnacvaDplyU
w+yySrHYsNyKXAuCnaZxp4lj4RMbxAI=
=iEHP
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.15-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.15-rc1
Here are the USB serial updates for 5.15-rc1, including:
- a couple of fixes for cp210x termios error handling
- retrieval of fw revisions for more cp210x types
- a switch to octal permissions for all module-parameter definitions
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.15-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: replace symbolic permissions by octal permissions
USB: serial: cp210x: determine fw version for CP2105 and CP2108
USB: serial: cp210x: clean up type detection
USB: serial: cp210x: clean up set-chars request
USB: serial: cp210x: clean up control-request timeout
USB: serial: cp210x: fix flow-control error handling
USB: serial: cp210x: fix control-characters error handling
USB: serial: io_edgeport: drop unused descriptor helper
Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a number
of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9+Tw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqyQCgxWjp4VD9Ycbz1XsHRIkkERWj6WgAnRe4mCpG
n5csYXATbYUD0UdH0hru
=xZCV
-----END PGP SIGNATURE-----
Merge tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.15-rc1.
Nothing huge in here, just lots of constant forward progress on a
number of different drivers and hardware support:
- more USB 4/Thunderbolt support added
- dwc3 driver updates and additions
- usb gadget fixes and addtions for new types
- udc gadget driver updates
- host controller updates
- removal of obsolete drivers
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
usb: isp1760: otg control register access
usb: isp1760: use the right irq status bit
usb: isp1760: write to status and address register
usb: isp1760: fix qtd fill length
usb: isp1760: fix memory pool initialization
usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
usb: host: xhci-rcar: Don't reload firmware after the completion
usb: xhci-mtk: allow bandwidth table rollover
usb: mtu3: fix random remote wakeup
usb: mtu3: return successful suspend status
usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
usb: xhci-mtk: modify the SOF/ITP interval for mt8195
usb: xhci-mtk: add a member of num_esit
usb: xhci-mtk: check boundary before check tt
usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
usb: xhci-mtk: fix issue of out-of-bounds array access
usb: xhci-mtk: support option to disable usb2 ports
usb: xhci-mtk: fix use-after-free of mtk->hcd
...
Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more cleanups
on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS9/lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylZNwCggKViEViSGqJFIafAZZjmI3Nt6tUAoMkRlhcd
n1MS3snS0Sq+7BdJs37M
=GyxP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did the
following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
The latter one will cause a tiny merge issue with your tree, as there
was a last-minute fix for this in 5.14 in your tree, but the fixup
should be "obvious". If you want me to provide a fixed merge for this,
please let me know.
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs
users at once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYS+FLQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXuACfWECnysDtXNe66DdETCFs1a1RToYAoMokWeU5
s8VFP1NY2BjmxJbkebLL
=8kVu
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
At least some PL2303GL have a bcdDevice of 0x405 instead of 0x100 as the
datasheet claims. Add it to the list of known release numbers for the
HXN (G) type.
Fixes: 894758d057 ("USB: serial: pl2303: tighten type HXN (G) detection")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.13
Link: https://lore.kernel.org/r/20210826110239.5269-1-robert.marko@sartura.hr
Signed-off-by: Johan Hovold <johan@kernel.org>
The set/clear of the otg control values is done writing to
two different 16bit registers, however we setup the regmap
width for isp1760/61 to 32bit value bits.
So, just access the clear register address (0x376)as the high
part of the otg control register set (0x374), and write the
values in one go to make sure they get clear/set.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-6-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the fields enum values to check interrupts
trigged, use the correct bit values.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-5-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were already writing directly the port status register to
trigger changes in isp1763. The same is needed in other IP
from the family, including also to setup the read address
before reading from device.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-4-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When trying to send bulks bigger than the biggest block size
we need to split them over several qtd. Fix this limiting the
maximum qtd size to largest block size.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-3-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The loops to setup the memory pool were skipping some
blocks, that was not visible on the ISP1763 because it has
fewer blocks than the ISP1761. But won testing on that IP
from the family that would be an issue.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-2-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.
Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.
Fixes: 7de8681be2 ("usb: gadget: u_audio: Free requests only after callback")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the uac2 function is stopped, there seems to be an issue reported on
some platforms (Intel Merrifield at least)
BUG: kernel NULL pointer dereference, address: 0000000000000008
...
RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0
...
Call Trace:
dwc3_remove_requests.constprop.0+0x12f/0x170
__dwc3_gadget_ep_disable+0x7a/0x160
dwc3_gadget_ep_disable+0x3d/0xd0
usb_ep_disable+0x1c/0x70
u_audio_stop_capture+0x79/0x120 [u_audio]
afunc_set_alt+0x73/0x80 [usb_f_uac2]
composite_setup+0x224/0x1b90 [libcomposite]
The issue happens only when the gadget is using the sync type "async", not
"adaptive". This indicates that problem is coming from the feedback
endpoint, which is only used with async synchronization mode.
The problem is that request is freed regardless of usb_ep_dequeue(), which
ends up badly if the request is not actually dequeued yet.
Update the feedback endpoint free function to release the endpoint the same
way it is done for the data endpoint, which takes care of the problem.
Fixes: 24f779dac8 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are spelling mistakes in a comment and a literal string.
Fix them.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210826123959.14838-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a dev_err error message. Fix it.
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210826122658.13914-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the datasheet, "Upon the completion of FW Download,
there is no need to write or reload FW.". Otherwise, it's possible
to cause unexpected behaviors. So, adds such a condition.
Fixes: 4ac8918f3a ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci-mtk has 64 slots for periodic bandwidth calculations and each
slot represents byte budgets on a microframe. When an endpoint's
allocation sits on the boundary of the table, byte budgets' slot
can be rolled over but the current implementation doesn't.
This patch allows the microframe index rollover and prevent
out-of-bounds array access.
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210827033105.26595-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAmEoGOUACgkQSFkpgVDW
cbvhVgf8DwIrSI2cie5t8pkRlOCUTpIdz0zcWjhygw1+wuz48X6fsArFbhqNOOsx
5ZoAQVp6BPRKTLwssV/5Q0rTXr4zVtra4J3QEMcswvZ2VPlGJY79LMNrhUwv096p
O7fG1zgZMwxpnOF9d6E6GCZbTgJts0n72uy9qckm+lKRRFnzNKDvA76y22lacflT
l6HXnYI9k+B5TU6TFQoxTJzm048a4qJ+5ROqMIigufazS9Y9mLVx4jiTK1zBRrwa
nStKlfSwCFVwLbFS6NrijI8oiLxqla2YOQ9lMr+rQny58CG/qReQeUYS9h2NvjcS
cseyHLz5dVG4jnc8LaQ0UAXvZOskqg==
=FPB9
-----END PGP SIGNATURE-----
Merge tag 'usb-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
Only one patch for improving port index calculation for chipidea driver, no big changes.
* tag 'usb-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: chipidea: host: fix port index underflow and UBSAN complains
If the port is going to send Discover_Identity Message, vdm_sm_running
flag was intentionally set before entering Ready States in order to
avoid the conflict because the port and the port partner might start
AMS at almost the same time after entering Ready States.
However, the original design has a problem. When the port is doing
DR_SWAP from Device to Host, it raises the flag. Later in the
tcpm_send_discover_work, the flag blocks the procedure of sending the
Discover_Identity and it might never be cleared until disconnection.
Since there exists another flag send_discover representing that the port
is going to send Discover_Identity or not, it is enough to use that flag
to prevent the conflict. Also change the timing of the set/clear of
vdm_sm_running to indicate whether the VDM SM is actually running or
not.
Fixes: c34e85fa69 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable <stable@vger.kernel.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds