Commit graph

109761 commits

Author SHA1 Message Date
Magnus Damm
41e4a9a5e2 sh: Add sh7203 pinmux code
This patch adds pinmux and gpio support for the sh7203 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:18 +09:00
Magnus Damm
16587c453b sh: Use sh7723 GPIO on AP325RXA board
This patch enables the GPIO code on AP325RXA and converts the code from
register based pinmux configuration to GPIO based pin by pin setup.
While at it 2 LEDs and one switch are added and exported to user space.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:15 +09:00
Magnus Damm
0436ec15ae sh: Add sh7723 pinmux code
This patch adds pinmux and gpio support for the sh7723 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:12 +09:00
Magnus Damm
91b6f3c525 sh: Use sh7722 GPIO on Migo-R board
This patch enables the GPIO code on Migo-R and converts the code from
register based pinmux configuration to GPIO based pin by pin setup.
Fix whitespace damage while at it and add 2 LEDs and export them to
user space.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:08 +09:00
Magnus Damm
8d7b5b0af7 sh: Add sh7722 pinmux code
This patch adds pinmux and gpio support for the sh7722 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:34:05 +09:00
Magnus Damm
2967dab1ae sh: GPIO and pinmux base code
This patch adds gpio code together with the pinmux table parser.
In the future we should optimize this and switch back to gpiolib.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 10:33:50 +09:00
Paul Mundt
14866543ad sh: More I/O routine overhauling.
This tidies up a lot of the PIO/MMIO split. No in-tree platforms were
making use of the MMIO overloading through the machvec (nor have any of
them been in some time), so we just kill all of that off. The ISA I/O
routine wrapping remains unaffected, which remains the only special
casing outside of the iomap API that boards need to think about.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-04 05:25:52 +09:00
Paul Mundt
bc0f424faa Merge branch 'sh/g3-prep' 2008-10-02 19:14:11 +09:00
Paul Mundt
a2159b5221 serial: sh-sci: Dynamic clock management depends on HAVE_CLK.
Presently this is conditionalized on sh, and disabled for sh64.
Now that SH-5 ties in to the clock framework, the sh64 exception
can be dropped. Additionally, ARM will want to use the same hooks
once SH-Mobile G3 grows clock framework support, so switch these
paths over to HAVE_CLK now.

Once the H8 and ARM sh-sci users hook up HAVE_CLK, the driver can
be switched over to having an outright dependency on it and the
ifdefs can go away.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-02 19:09:13 +09:00
Paul Mundt
225c9a8d1d video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.
This provides a workaround for users of sh_mobile_lcdcfb that don't
define HAVE_CLK and have otherwise sane clock initialization.

At the same time, move the sh_mobile_lcdc.h header to include/video/.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 16:24:32 +09:00
Paul Mundt
bbfbd8b151 sh: Move the shared INTC code out to drivers/sh/
The INTC code will be re-used across different architectures, so move
this out to drivers/sh/ and include/linux/sh_intc.h respectively.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 16:13:54 +09:00
Paul Mundt
7ff731aeba serial: sh-sci: Handle the general UPF_IOREMAP case.
Presently we don't do much with UPF_IOREMAP other than special case it
for SH-5's onchip_remap() on the early console. Tie this in generically
for platforms that need the remap.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 15:46:58 +09:00
Paul Mundt
62429e0364 sh: Use __raw_xxx() I/O accessors for INTC and IPR.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 15:19:10 +09:00
Paul Mundt
64c9627c26 sh: Fix up the __raw_read/writeX() definitions.
These were doing largely bogus things and using the wrong typing for
the address. Bring these in line with the ARM definitions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01 15:12:27 +09:00
Paul Mundt
bdeb3be7cc sh: Use clk fwk for preset lpj on sh64, too.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 20:14:44 +09:00
Paul Mundt
4d01cdafba sh: SH-5 clk fwk support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 20:09:17 +09:00
Paul Mundt
50b72e600b sh: sh_ksyms_64 needs __strncpy_from_user() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 19:45:16 +09:00
Paul Mundt
091db04559 sh: Fix up signal_64 cast warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 19:44:40 +09:00
Paul Mundt
88856d67cf sh: Fix up uaccess_64 put/get_user() cast warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-29 19:43:44 +09:00
Paul Mundt
1bec157a1f sh: Force pending restarted system calls to return -EINTR.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-24 14:37:35 +09:00
Nobuhiro Iwamatsu
aa88f169d6 sh: ap325rxa: create CPLD data area in mtd
AP320 and AP325RXA has CPLD data in NOR Flash.
If this area erased, this board can not boot.
This patch create CPLD data area and set writeable mask bit.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-24 13:57:42 +09:00
Paul Mundt
e7ab3cd251 sh: Add FPU registers to regset interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 19:04:55 +09:00
Paul Mundt
4b4cf7595a sh: Add missing asm/ftrace.h.
This was missed with the ftrace support commit.. check it in now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 17:17:53 +09:00
Paul Mundt
6902aa84f5 doc: Add remaining SH parameters to kernel-parameters.txt.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 17:14:42 +09:00
Paul Mundt
9d2b1f81dd sh: ftrace support.
This adds support for ftrace to SH. This only includes CONFIG_FTRACE,
and does not handle dynamic ftrace presently.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 16:43:45 +09:00
Paul Mundt
3d58695edb sh: Trivial trace_mark() instrumentation for core events.
This implements a few trace points across events that are deemed
interesting. This implements a number of trace points:

	- The page fault handler / TLB miss
	- IPC calls
	- Kernel thread creation

The original LTTng patch had the slow-path instrumented, which
fails to account for the vast majority of events. In general
placing this in the fast-path is not a huge performance hit, as
we don't take page faults for kernel addresses.

The other bits of interest are some of the other trap handlers, as
well as the syscall entry/exit (which is better off being handled
through the tracehook API). Most of the other trap handlers are corner
cases where alternate means of notification exist, so there is little
value in placing extra trace points in these locations.

Based on top of the points provided both by the LTTng instrumentation
patch as well as the patch shipping in the ST-Linux tree, albeit in a
stripped down form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 13:56:39 +09:00
Paul Mundt
8f2baee280 sh: Kill off duplicate page fault notifiers in slow path.
We already have hooks in place in the __do_page_fault() fast-path,
so kill them off in the slow path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 12:11:25 +09:00
Paul Mundt
887f1ae3bc sh: Look up the trap vector for the page fault notifier.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 12:06:43 +09:00
Paul Mundt
4c59e2942e sh: Move lookup_exception_vector() out to asm/system_32.h.
There are other places where we want to have access to the trap/exception
number, so move out the lookup_exception_vector() helper. While we're at
it, refactor it slightly to return the vector instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 12:00:23 +09:00
Luca Santini
347cd34f4b sh: edosk7760: Correct size of bootloader flash partition.
This is 256K instead of 1M.

[ Converted to use asm/sizes.h. -- PFM ]

Signed-off-by: Luca Santini <luca.santini@spesonline.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 10:32:29 +09:00
Paul Mundt
d3ea00a36d sh: Add a few more definitions to asm/sizes.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 10:31:57 +09:00
Paul Mundt
837c946aad sh: Copy in asm/sizes.h helper from ARM.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-21 10:24:18 +09:00
Paul Mundt
c15c5f8c2b sh: Support kernel stacks smaller than a page.
This follows the powerpc commit f6a616800e
'[POWERPC] Fix kernel stack allocation alignment'.

SH has traditionally forced the thread order to be relative to the page
size, so there were never any situations where the same bug was
triggered by slub. Regardless, the usage of > 8kB stacks for the larger
page sizes is overkill, so we switch to using slab allocations there,
as per the powerpc change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-20 20:21:33 +09:00
Paul Mundt
b817f7e020 sh: Disable 4kB stacks when using PAGE_SIZE_64KB.
This combination triggers a divide by zero in kernel/fork.c when
calculating the initial max_threads value:

	max_threads = mempages / (8 * THREAD_SIZE / PAGE_SIZE);

Simply disable 4K stacks on 64kB PAGE_SIZE to work around this,
as it's not a terribly useful combination to begin with.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-20 20:16:35 +09:00
Paul Mundt
2194478157 sh: HAVE_IOREMAP_PROT depends on MMU.
HAVE_IOREMAP_PROT enables an unconditional reference to
generic_access_phys(), which remains undefined in the nommu case.
As there's no point in supporting this there anyways, simply fix
up the dependency.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:26:44 +09:00
Paul Mundt
b406efefd5 sh: Fix up headers_check regression.
linux/mmzone.h isn't exported, kill it off from asm/setup.h and simply
deal with it in the places that have a dependency instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:24:59 +09:00
Paul Mundt
81b669952e sh: Consolidate struct sh_cpuinfo definitions across _32/_64 split.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:24:02 +09:00
Paul Mundt
8a80a5e9e8 sh: Fix up signal_64 conflicting handle_signal() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:14:36 +09:00
Paul Mundt
b85641bdde sh: Make memory hot-add and hot-remove depend on MMU.
Cleans up link numerous build issues with page migration and so on when
enabled on nommu builds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:13:27 +09:00
Paul Mundt
b3d765f5df sh: Fix up fpu emu build.
The addition of the kprobes code pushed down a variable declaration,
clean it up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-17 23:12:11 +09:00
Paul Mundt
5a89f1adbc sh: latencytop support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-13 01:44:03 +09:00
Paul Mundt
0e660d2d43 sh: Tidy up ELF core dumps.
These have been using overrides for ELF_CORE_COPY_TASK_REGS and
ELF_CORE_COPY_FPREGS while the generic versions can be used instead.
Presently the pt_regs are also duplicated across elf_core_copy_regs()
and elf_core_copy_task_regs(), this switches to simply copying out
through elf_core_copy_regs() instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 23:27:46 +09:00
Paul Mundt
72461997c3 sh: Check SR.DSP bit for DSP regset validity.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:56:35 +09:00
Paul Mundt
f9540ececa sh: Add missing task_user_regset_view() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:42:43 +09:00
Paul Mundt
5dadb34394 sh: Add DSP registers to regset interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:42:10 +09:00
Paul Mundt
6bff1592d8 sh: Fix up NUMA build error with se7722_defconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:41:30 +09:00
Paul Mundt
3231739d97 sh: Enable HAVE_ARCH_TRACEHOOK.
Now that the rest of the support requirements are out of the way, finally
enable support for tracehook.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:13:36 +09:00
Paul Mundt
fb4f87a2f0 sh: Provide the asm/syscall.h interface, needed by tracehook.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:13:13 +09:00
Paul Mundt
9996b42ac0 sh: provide user_stack_pointer(), needed for tracehook support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:11:36 +09:00
Paul Mundt
f8b890ab4c sh: Flag T-bit for syscall restart.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 22:08:20 +09:00