Split the 'ubifs_rcvry_gc_commit()' function and introduce a 'grab_empty_leb()'
heler. This cleans 'ubifs_rcvry_gc_commit()' a little and makes it a bit less
of spagetti.
Also, add a commentary which explains why it is crucial to first search for an
empty LEB and then run commit.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When UBIFS is in the failure mode (used for power cut emulation testing) we for
some reasons do not dump the stack in many places, e.g., in assertions.
Probably at early days we had too many of them and disabled this to make the
development easier, but then never enabled. Nowadays I sometimes observe
assertion failures during power cut testing, but the useful stackdump is not
printed, which is bad. This patch makes UBIFS always print the stackdump when
debugging is enabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
If we fail to recover the gc_lnum we just return an error and it then
it is difficult to figure out why this happened. This patch adds useful
debugging information which should make it easier to debug the failure.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch removes a piece of code in 'ubifs_rcvry_gc_commit()' which is never
executed. We call 'ubifs_find_dirty_leb()' function with min_space =
wbuf->offs, so if it returns us an LEB, it is guaranteed to have at lease
'wbuf->offs' bytes of free+dirty space. So we can remove the subsequent code
which deals with "returned LEB has less than 'wbuf->offs' bytes of free+dirty
space". This simplifies 'ubifs_rcvry_gc_commit()' a little.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We have duplicated code in 'ubifs_garbage_collect()' and
'ubifs_rcvry_gc_commit()', which is about handling the special case of free
LEB. In both cases we just want to garbage-collect the LEB using
'ubifs_garbage_collect_leb()'.
This patch teaches 'ubifs_garbage_collect_leb()' to handle free LEB's so that
the caller does not have to do this and the duplicated code is removed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Remove the following commentary from 'ubifs_file_mmap()':
/* 'generic_file_mmap()' takes care of NOMMU case */
I do not understand what it means, and I could not find anything relater to
NOMMU in 'generic_file_mmap()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch is a tiny improvement which removes few bytes of code.
UBIFS debugfs files are non-seekable and the file position is ignored,
so do not increase it in the write handler.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'dbg_dump_lprop()' is trying to detect journal head LEBs when printing,
so it looks at the write-buffers. However, if we are in R/O mode, we
de-allocate the write-buffers, so 'dbg_dump_lprop()' oopses. This patch fixes
the issue.
Note, this patch is not critical, it is only about the debugging code path, and
it is unlikely that anyone but UBIFS developers would ever hit this issue.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We have our own flags indicating R/O mode, and c->ro_mode is equivalent
to MS_RDONLY. Let's be consistent and use UBIFS flags everywhere.
This patch is just a minor cleanup.
Additionally, add a comment that we are surprised with VFS behavior -
as a reminder to look at this some day.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When the debugging failure emulation is enabled and UBIFS decides to
emulate an I/O error, it uses EIO error code. In which case UBIFS
switches into R/O mode later on. The for the user-space is that when
a failure is emulated, the file-system sometimes returns EIO and
sometimes EROFS. This makes it more difficult to implement user-space
tests for the failure mode. Let's be consistent and return EROFS in
all the cases.
This patch is an improvement for the debugging code and does not affect
the functionality at all.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is just a tiny clean-up patch. The variable name for empty address
space operations is "empty_aops". Let's use consistent names for empty
inode and file operations: "empty_iops" and "empty_fops", instead of
inconsistent "none_inode_operations" and "none_file_operations".
Artem: re-write the commit message.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Try to improve UBIFS testing coverage by randomly picking LEBs to
store in lsave, rather than picking them optimally. Create a debugging
version of 'populate_lsave()' for these purposes and enable it when
general debugging self-checks are enabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS can force itself to use the 'in-the-gaps' commit method - the last resort
method which is normally invoced very very rarely. Currently this "force
int-the-gaps" debugging feature is a separate test mode. But it is a bit saner
to make it to be the "general" self-test check instead.
This patch is just a clean-up which should make the debugging code look a bit
nicer and easier to use - we have way too many debugging options.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch improves the 'dbg_check_space_info()' function which checks
whether the amount of space before re-mounting and after re-mounting
is the same (remounting from R/O to R/W modes and vice-versa).
The problem is that 'dbg_check_space_info()' does not save the budgeting
information before re-mounting, so when an error is reported, we do not
know why the amount of free space changed.
This patches makes the following changes:
1. Teaches 'dbg_dump_budg()' function to accept a 'struct ubifs_budg_info'
argument and print out the this argument. This way we may ask it to
print any saved budgeting info, no only the current one.
2. Accordingly changes all the callers of 'dbg_dump_budg()' to comply with
the changed interface.
3. Introduce a 'saved_bi' (saved budgeting info) field to
'struct ubifs_debug_info' and save the budgeting info before re-mounting
there.
4. Change 'dbg_check_space_info()' and make it print both old and new
budgeting information.
5. Additionally, save 'c->igx_gc_cnt' and print it if and error happens. This
value contributes to the amount of free space, so we have to print it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Re-arrange the budget dump and make sure we first dump all
the 'struct ubifs_budg_info' fields, and then the other information.
Additionally, print the 'uncommitted_idx' variable.
This change is required for to the following dumping function
enhancement where it will be possible to dump saved
'struct ubifs_budg_info' objects, not only the current one.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The current 'dbg_dump_budg()' calling convention is that the
'c->space_lock' spinlock is held. However, none of the callers
actually use it from contects which have 'c->space_lock' locked,
so all callers have to explicitely lock and unlock the spinlock.
This is not very sensible convention. This patch changes it and
makes 'dbg_dump_budg()' lock the spinlock instead of imposing this
to the callers. This simplifies the code a little.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch separates out all the budgeting-related information
from 'struct ubifs_info' to 'struct ubifs_budg_info'. This way the
code looks a bit cleaner. However, the main driver for this is
that we want to save budgeting information and print it later,
so a separate data structure for this is helpful.
This patch is a preparation for the further debugging output
improvements.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
There was an attempt to standartize various "__attribute__" and
other macros in order to have potentially portable and more
consistent code, see commit 82ddcb0405.
Note, that commit refers Rober Love's blog post, but the URL
is broken, the valid URL is:
http://blog.rlove.org/2005/10/with-little-help-from-your-compiler.html
Moreover, nowadays checkpatch.pl warns about using
__attribute__((packed)):
"WARNING: __packed is preferred over __attribute__((packed))"
It is not a big deal for UBIFS to use __packed, so let's do it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Fix several minor stylistic issues:
* lines longer than 80 characters
* space before closing parenthesis ')'
* spaces in the indentations
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Turn the debufs files UBIFS maintains into non-seekable. Indeed, none
of them is supposed to be seek'ed.
Do this by making the '.lseek()' handler to be 'no_llseek()' and by
using 'nonseekable_open()' in the '.open()' operation.
This does mean an API break but this debugging API is only used by a couple
of test scripts which do not rely in the 'llseek()' operation.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Commit a626ca6a65 ("vm: fix vm_pgoff wrap in stack expansion") fixed
the case of an expanding mapping causing vm_pgoff wrapping when you had
downward stack expansion. But there was another case where IA64 and
PA-RISC expand mappings: upward expansion.
This fixes that case too.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
drm/i915/lvds: Only act on lid notify when the device is on
drm/i915: fix intel_crtc_clock_get pipe reads after "cleanup cleanup"
drm/i915: Only enable the plane after setting the fb base (pre-ILK)
drm/i915/dp: Be paranoid in case we disable a DP before it is attached
drm/i915: Release object along create user fb error path
Linux kernel excludes guard page when performing mlock on a VMA with
down-growing stack. However, some architectures have up-growing stack
and locking the guard page should be excluded in this case too.
This patch fixes lvm2 on PA-RISC (and possibly other architectures with
up-growing stack). lvm2 calculates number of used pages when locking and
when unlocking and reports an internal error if the numbers mismatch.
[ Patch changed fairly extensively to also fix /proc/<pid>/maps for the
grows-up case, and to move things around a bit to clean it all up and
share the infrstructure with the /proc bits.
Tested on ia64 that has both grow-up and grow-down segments - Linus ]
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Tested-by: Tony Luck <tony.luck@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
eeepc-laptop: Use ACPI handle to identify rfkill port
[PATCH] sony-laptop: limit brightness range to DSDT provided ones
sony-laptop: report failures on setting LCD brightness
thinkpad-acpi: module autoloading for newer Lenovo ThinkPads.
If we're using vga switcheroo, the device may be turned off
and poking it can return random state. This provokes an OOPS fixed
separately by 8ff887c847 (drm/i915/dp: Be paranoid in case we disable a
DP before it is attached). Trying to use and respond to events on a
device that has been turned off by the user is in principle a silly thing
to do.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Keith Packard <keithp@keithp.com>
Despite the fixes in 548f245ba6 (drm/i915: fix per-pipe reads after
"cleanup"), we missed one neighbouring read that was mistakenly replaced
with the reg value in 9db4a9c (drm/i915: cleanup per-pipe reg usage).
This was preventing us from correctly determining the mode the BIOS left
the panel in for machines that neither have an OpRegion nor access to
the VBT, (e.g. the EeePC 700).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
When enabling the plane, it is helpful to have already pointed that
plane to valid memory or else we may incur the wrath of a PGTBL_ER.
This code preserved the behaviour from the bad old days for unknown
reasons...
Found by assert_fb_bound_for_plane().
References: https://bugs.freedesktop.org/show_bug.cgi?id=36246
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: add pci id to acer travelmate quirk for 5730
drm/radeon: fix order of doing things in radeon_crtc_cursor_set
drm: mm: fix debug output
drm/radeon/kms: ATPX switcheroo fixes
drm/nouveau: Fix a crash at card takedown for NV40 and older cards
* hpfs:
HPFS: Remove unused variable
HPFS: Move declaration up, so that there are no out-of-scope pointers
HPFS: Fix some unaligned accesses
HPFS: Fix endianity. Make hpfs work on big-endian machines
HPFS: Implement fsync for hpfs
HPFS: Fix a bug that filesystem was not marked dirty when remounting it
HPFS: Restrict uid and gid to 16-bit values
HPFS: When marking or clearing the dirty bit, sync the filesystem
HPFS: Use types with defined width
HPFS: Remove mark_inode_dirty
HPFS: Remove CR/LF conversion option
HPFS: Remove remaining locks
HPFS: Introduce a global mutex and lock it on every callback from VFS.
HPFS: Make HPFS compile on preempt and SMP
Move declaration up, so that there are no out-of-scope pointers
Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a bug that filesystem was not marked dirty when remounting it
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Restrict uid and gid to 16-bit values.
HPFS stores only 2 bytes in the EAs.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When marking or clearing the dirty bit, sync the filesystem
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use types with defined width
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove CR/LF conversion option
It is unused anyway. It was used on 2.2 kernels or so.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove remaining locks
Because of a new global per-fs lock, no other locks are needed
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce a global mutex and lock it on every callback from VFS.
Performance doesn't matter, reviewing the whole code for locking correctness
would be too complicated, so simply lock it all.
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make HPFS compile on preempt and SMP
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ACPI notification we get from rfkill events on these machines gives
us all the information we need to identify the port that's changed. Do
so rather than assuming that it's always bus 1.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The new style brightness control provides an operating range of 9 values
(seems consistent over a large number of models sharing the same
brightness control methods).
Read and use the minimum and maximum values to limit the backlight
interface between those boundaries.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Check if we were successful in setting the requested brightness and
report failure in that case.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead
of IBM0068. Added new HID so that thinkpad_acpi module will
auto load on these newer Lenovo ThinkPads.
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
