* Drop obsolete dependencies on COMPILE_TEST
* MAINTAINERS: rectify entry for MESON NAND controller bindings
* Drop EXPORT_SYMBOL_GPL for nanddev_erase()
Raw NAND driver changes:
* marvell: Enable NFC/DEVBUS arbiter
* gpmi: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
* mpc5121: Replace NO_IRQ by 0
* lpc32xx_{slc,mlc}:
- Switch to using pm_ptr()
- Switch to using gpiod API
* lpc32xx_mlc: Switch to using pm_ptr()
* cadence: Support 64-bit slave dma interface
* rockchip: Describe rk3128-nfc in the bindings
* brcmnand: Update interrupts description in the bindings
SPI-NAND driver changes:
* winbond:
- Add Winbond W25N02KV flash support
- Fix flash identification
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmOGGfIACgkQJWrqGEe9
VoSZVQgAmew5RtMegFus/AXflUsGYCvZKfV1LVnxmSoGIKBrJr3yjzh6mFuLyzaP
qt2KljEJ4dblk2M3efosX5YeAkz7A7evm218NHGeKWHMPCDimSE1ptAyBhhMmsVi
cgCgu3LXh369dK9OAm7ZVR4hOdDuK5rpYIcXA4mUh0yqiFxfxsuuNY7QBDVrN+qt
SNmZkTBbCgGRxo7RRanN2ljnSm31p6TyhngUDKG89puMka9gGA9yWLbWFDpwM5SS
L0Tr2ZOHctzz/X/1s2yPcnN6ZPpqsc1wLnGyLOWlhkm7oo7aiT59rlHj9GHbp82h
7lXf7MeWxSNSVr9PMHHUR7XDqlLaOw==
=aOZ+
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.2' into mtd/next
Raw NAND core changes:
* Drop obsolete dependencies on COMPILE_TEST
* MAINTAINERS: rectify entry for MESON NAND controller bindings
* Drop EXPORT_SYMBOL_GPL for nanddev_erase()
Raw NAND driver changes:
* marvell: Enable NFC/DEVBUS arbiter
* gpmi: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
* mpc5121: Replace NO_IRQ by 0
* lpc32xx_{slc,mlc}:
- Switch to using pm_ptr()
- Switch to using gpiod API
* lpc32xx_mlc: Switch to using pm_ptr()
* cadence: Support 64-bit slave dma interface
* rockchip: Describe rk3128-nfc in the bindings
* brcmnand: Update interrupts description in the bindings
SPI-NAND driver changes:
* winbond:
- Add Winbond W25N02KV flash support
- Fix flash identification
Fix merge conflict with mtd tree regarding the brcm bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Sensors driver for OXP Handhelds from One-Netbook that expose fan reading
and control via hwmon sysfs.
As far as I could gather all OXP boards have the same DMI strings and
they can be told appart only by the boot cpu vendor (Intel/AMD).
Currently only AMD boards are supported since Intel have different EC
registers and values to read/write.
Fan control is provided via pwm interface in the range [0-255]. AMD
boards have [0-100] as range in the EC, the written value is scaled to
accommodate for that.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com
[groeck: Removed misleading comment about module_platform_driver()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
This includes:
* L1/L2 cache topology for t600x
* CPUfreq nodes for t8103/t600x
* DT binding for CPUfreq
* Associated MAINTAINERS update
The CPUfreq driver was already merged for 6.2 via its tree.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCY4wjTAAKCRAd+FPLCI8z
YpOSAP9cRxrug+82UVjMWkrstNQp4oYPIxLnDKZQeeT5HWqMfwD6AwpuhZLDl04v
n4zzccTJAVJJWJZi961Cw9/9Zb0bRw0=
=MXJs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L7ez
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-6.2-v2' of https://github.com/AsahiLinux/linux into soc/dt
Apple SoC DT updates for 6.2 (v2).
This includes:
* L1/L2 cache topology for t600x
* CPUfreq nodes for t8103/t600x
* DT binding for CPUfreq
* Associated MAINTAINERS update
The CPUfreq driver was already merged for 6.2 via its tree.
* tag 'asahi-soc-dt-6.2-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: Add CPU topology & cpufreq nodes for t600x
arm64: dts: apple: Add CPU topology & cpufreq nodes for t8103
dt-bindings: cpufreq: apple,soc-cpufreq: Add binding for Apple SoC cpufreq
MAINTAINERS: Add entries for Apple SoC cpufreq driver
arm64: dts: apple: Add t600x L1/L2 cache properties and nodes
Link: https://lore.kernel.org/r/a9353121-7fed-fde7-6f40-939a65bfeefb@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since Warn count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/warn_count to expose it to userspace.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-6-keescook@chromium.org
Way back in 2016 in commit 5a8b187c61 ("pktcdvd: mark as unmaintained
and deprecated") this driver was marked as "will be removed soon". 5
years seems long enough to have it stick around after that, so finally
remove the thing now.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221202182758.1339039-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since Oops count is now tracked and is a fairly interesting signal, add
the entry /sys/kernel/oops_count to expose it to userspace.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221117234328.594699-3-keescook@chromium.org
This MAINTAINERS update is split, as usual, to facilitate merges via the
SoC tree and avoid conflicts.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is the basic infrastructure of a new miscdevice to hold the iommufd
IOCTL API.
It provides:
- A miscdevice to create file descriptors to run the IOCTL interface over
- A table based ioctl dispatch and centralized extendable pre-validation
step
- An xarray mapping userspace ID's to kernel objects. The design has
multiple inter-related objects held within in a single IOMMUFD fd
- A simple usage count to build a graph of object relations and protect
against hostile userspace racing ioctls
The only IOCTL provided in this patch is the generic 'destroy any object
by handle' operation.
Link: https://lore.kernel.org/r/6-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms
and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google
Pazquel and OnePlus Nord N100.
A wide variety of updates to align with DeviceTree bindings across
many/most platforms is introduced, and incorrectly styled comments are
adjusted across the tree.
Apps RSC is added to the cluster-idle power-domain across SM8150,
SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as
the last core is being powered down.
Remoteproc firmware patches are aligned with agreed upon structure used
in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony
Xperia devices and Samsung Galaxy Book2 (although these are not
available in linux-firmware today).
On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc
supply is specified for the HK01 board.
Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained
vibrator support.
The application subsystem's IOMMU and the display subsystem is enabled
for MSM8953.
A new CPU frequency table is introduced for MSM8996Pro, to properly
describe it separate of MSM8996. The GPU opp-table is extended as well.
On SC7180 USB is marked as a wakeup source, USB gains required-opps to
ensure that the core voltage rail is voted for as needed. The
description of the fingerprint sensor in Trogdor is corrected.
On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS
USB PHY is defined across SC7280.
The memory map across Google Herobrine is adjusted, to regain unused
memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced
and the bard gains touchscreen.
NVME support is disabled on Villager boards, as it's not used.
PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi
enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs
and thermal zones are intrduced for the same. Lenovo Thinkpad X13s
gains LID switch support.
Fairphone FP3 gains touchscreen support.
Support for Xiaomi Poco F1 variant with EBBG panel.
The round-robin ADC is enabled across DB845c, OnePlus devices and
Pocophone F1 devices.
The displayport controller on SDM845 is introduced.
SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card,
touchscreen and GPI DMA is enabled.
Fairphone FP4 got SD-card support.
UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and
SM8450.
Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC
regulators defined and USB definition corrected, to enable USB3.
The SDHCI controller is described for SM8450 and microSD support is
enabled for the HDK and QRD devices.
SM8450 also gains camera CCI interface and display clock controller.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmN/QfsVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FR8wP/3ynHPC8Kq/exZfb2n5M6gS3+3YZ
BxwCcjcwMCMBwFZUZ4LPYDctd+TL8rJ0htnK9Foq61i8FJl2cUqvU/OKtfD3W9gO
wTzZC1bZJItZCreb4T7Kj2t3hBhO5dkG+UgbovfOgk9tJXvgNbio66ZGJqKDtU92
ubIAJxFERACERT9g6gtAdBa2BEofG/zI2ei8HqkKP/7u51XXtRNzVCYXyHM8TydL
M03U6snZNJkkj+UM8Wzrg9mxkheAOSyo0nLK58Lje2I4CjV5WToCZUICqm7z7l36
GoBnDXaRacmb0gIco9sGMo5K7jNqQ/6U1JVJRAb+NNM16fp0mKOboZ8SLKI9oT6g
9UXiylzzz0buvNzzTu7HF8JRNQvxBnLKC+nE/ekWQm6uhsmJ9DkrMBnxn5fyZ1iL
5uFXcaVDagVQCdHOfYntQzKEGsoPwg0KQJbjoM+T3tkQX5NcWVP+06uYLWqRxgk5
jTn98JXK+2w4yYdhCKr8U71mBoWwoYwOZiEnZlL+P+52gZUoWDgA65BGnoqYk2cW
2KsfB+EM3ggye6a4X/gVVuCR8bYO5+YIUyoBWLRKd51xw0Mr99KUc+ugTmCKGZpW
31p/NhgdvfOK9qLRhEVH9zDT24Jqo1tRF2NgtJrFufMcYbdNbB8BA22aDLoTbE0m
Kru1n0WaaU4vBIbm
=0+lj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c209
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DTS updates for 6.2
This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms
and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google
Pazquel and OnePlus Nord N100.
A wide variety of updates to align with DeviceTree bindings across
many/most platforms is introduced, and incorrectly styled comments are
adjusted across the tree.
Apps RSC is added to the cluster-idle power-domain across SM8150,
SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as
the last core is being powered down.
Remoteproc firmware patches are aligned with agreed upon structure used
in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony
Xperia devices and Samsung Galaxy Book2 (although these are not
available in linux-firmware today).
On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc
supply is specified for the HK01 board.
Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained
vibrator support.
The application subsystem's IOMMU and the display subsystem is enabled
for MSM8953.
A new CPU frequency table is introduced for MSM8996Pro, to properly
describe it separate of MSM8996. The GPU opp-table is extended as well.
On SC7180 USB is marked as a wakeup source, USB gains required-opps to
ensure that the core voltage rail is voted for as needed. The
description of the fingerprint sensor in Trogdor is corrected.
On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS
USB PHY is defined across SC7280.
The memory map across Google Herobrine is adjusted, to regain unused
memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced
and the bard gains touchscreen.
NVME support is disabled on Villager boards, as it's not used.
PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi
enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs
and thermal zones are intrduced for the same. Lenovo Thinkpad X13s
gains LID switch support.
Fairphone FP3 gains touchscreen support.
Support for Xiaomi Poco F1 variant with EBBG panel.
The round-robin ADC is enabled across DB845c, OnePlus devices and
Pocophone F1 devices.
The displayport controller on SDM845 is introduced.
SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card,
touchscreen and GPI DMA is enabled.
Fairphone FP4 got SD-card support.
UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and
SM8450.
Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC
regulators defined and USB definition corrected, to enable USB3.
The SDHCI controller is described for SM8450 and microSD support is
enabled for the HDK and QRD devices.
SM8450 also gains camera CCI interface and display clock controller.
* tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (261 commits)
arm64: dts: qcom: sdm845-polaris: Don't duplicate DMA assignment
arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3
arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
arm64: dts: qcom: sc7280: Make herobrine-audio-rt5682 mic dtsi's match more
arm64: dts: qcom: trim addresses to 8 digits
arm64: dts: msm8998: unify PCIe clock order withMSM8996
arm64: dts: msm8998: add MSM8998 specific compatible
arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller
arm64: dts: qcom: sc8280xp-x13s: enable modem
arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: enable WiFi controller
arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem
arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators
arm64: dts: qcom: sa8295p-adp: enable PCIe
arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes
arm64: dts: qcom: add sdm670 and pixel 3a device trees
arm64: dts: qcom: sc7280: Add Google Herobrine WIFI SKU dts fragment
arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE
arm64: dts: qcom: sm7225-fairphone-fp4: Enable SD card
...
Link: https://lore.kernel.org/r/20221124100650.1982448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
subsystem, which is part of the DRM subsystem.
The patches:
- Add a new directory at drivers/accel.
- Add a new major (261) for compute accelerators.
- Add a new DRM minor type for compute accelerators.
- Integrate the accel core code with DRM core code.
- Add documentation for the accel subsystem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmN8r2UACgkQZR1NuKta
54CJzwf/SkjfYoo8bLi1eedSSLZQZiNFtkqUqH0jho2UT5MG3yoPasXe/hovnf6+
SOE1fMO/VpfQPJ5xqjuHwUaGxXIFFi1vkMllhZrODljTP0dNjhgWc7WTTsKTj586
pMpYWA8bDfoF0SSGfEYbDi7qqiZFFVP6UeM4jvQgPhURNbLhF2dx69D3K1ZLvJJE
673ZzJkZcnZRdTjypCE2gCOcXpXclbNenFHqMkuaX6JfGu+8YPR0GGVWiBfo+FvO
gNnxXDhBmYdn+Khzzxr+ssewOklHM+Moe2Iv20jZQgVsHot3c+bJx+7BPBHpg5Ib
4uqIrwMZENIQoH+FgYxSRMfEn0JI/w==
=RCyB
-----END PGP SIGNATURE-----
Merge tag 'drm-accel-2022-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/accel into drm-next
This tag contains the patches that add the new compute acceleration
subsystem, which is part of the DRM subsystem.
The patches:
- Add a new directory at drivers/accel.
- Add a new major (261) for compute accelerators.
- Add a new DRM minor type for compute accelerators.
- Integrate the accel core code with DRM core code.
- Add documentation for the accel subsystem.
Signed-off-by: Dave Airlie <airlied@redhat.com>
some acks from the list (some are in the patch series):
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Sonal Santan <sonal.santan@amd.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122112222.GA352082@ogabbay-vm-u20.habana-labs.com
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0Lnw
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
Now that Pensando is a part of AMD we need to update
a couple of addresses. We're keeping the mailing list
address for the moment, but that will likely change in
the near future.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20221129011734.20849-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmOEnFsRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuhVQf/c3MdS++rufVGBcplf7zG5MG8j6pJS9bx
ymuyqsqKoLuPDjLemFIbpcEkkLjt63KYNa8A9wkQ8vSfeg0wPVEym0b234q3XMb0
aAlRBurFAYdIql+aiZI2FxOlKfdLC6d/Sjr/FOe25QfX4H4FxBfZM94nobLawu/d
YBGiI29pauEFqZqBU4I3MAtVbk8/gDIVU318KQavpLuPJZNX5F83M025aokDCVj+
3l69MvphYMVvfOQKS8gLFBBJ41WpSrjIkuH0oQW1fmVc8b6Kiu9wGahOdxDm4JE6
iDiy8LdkvqpXehPMsHPqL/JLMByuJ+q/esZUNoX4vlITordNm/Nj0w==
=iNqa
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.1
Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.
* tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
wifi: cfg80211: don't allow multi-BSSID in S1G
wifi: cfg80211: fix buffer overflow in elem comparison
wifi: wilc1000: validate number of channels
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute
wifi: wilc1000: validate pairwise and authentication suite offsets
MAINTAINERS: mark rsi wifi driver as orphan
====================
Link: https://lore.kernel.org/r/20221128113513.6F459C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tracing subsystem now has its own mailing list (although patches
should also be sent to LKML) as well as a new patchwork entry for kernel
related tracing patches.
Update the MAINTAINERS file to reflect the changes.
Link: https://lore.kernel.org/linux-trace-kernel/20221017140513.14b9ce2e@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adding Paul as co-maintainer of Xen support to help ensure that things
don't fall through the cracks when I spend three months at a time
travelling...
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We recently received a patch for fs/exportfs/expfs.c, but there
isn't a subsystem maintainer listed for fs/exportfs:
Christian Brauner <brauner@kernel.org> (commit_signer:2/2=100%,authored:1/2=50%,added_lines:3/6=50%,removed_lines:2/6=33%)
Al Viro <viro@zeniv.linux.org.uk> (commit_signer:1/2=50%,authored:1/2=50%,added_lines:3/6=50%,removed_lines:4/6=67%)
Miklos Szeredi <mszeredi@redhat.com> (commit_signer:1/2=50%)
Amir Goldstein <amir73il@gmail.com> (commit_signer:1/2=50%)
linux-kernel@vger.kernel.org (open list)
Neil says:
> Looking at recent commits, patches come in through multiple
> different trees.
> nfsd certainly has an interest in expfs.c. The only other user is
> name_to_handle/open_by_handle API.
> I see it as primarily nfsd functionality which is useful enough to
> be exported directly to user-space.
> (It was created by me when I was nfsd maintainer - does that
> count?)
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
The APR/GPR nodes are organized like:
apr-or-gpr-device-node <- qcom,apr.yaml
apr-gpr-service@[0-9] <- qcom,apr.yaml
service-specific-components <- /schemas/sound/qcom,q6*.yaml
The schema for services (apr-gpr-service@[0-9]) already grows
considerably and is still quite not specific. It allows several
incorrect combinations, like adding a clock-controller to a APM device.
Restricting it would complicate the schema even more. Bringing new
support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as
well.
Simplify the qcom,apr.yaml by splitting the services to a shared file
which will be:
1. Referenced by qcom,apr.yaml with additionalProperties:true,
2. Referenced by specific bindings for services with
additionalProperties:false (not yet in this commit).
While moving the code, add also required 'reg' and
'qcom,protection-domain' to further constrain the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221115120235.167812-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Includes a few late breaking fixes for old issues.
Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().
New devices support
* adi,ad74115
- New driver for this complex input/output device with 16 bit ADCs,
14 bit DACs amongst other features.
- A few tidy ups / removal of unused data patches followed.
* adi,adf4377
- New driver for this dual output integer-N phased locked loop and VCO
chip.
* maxim,max30208
- New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
- Support for LSM6DS016IS (chip specific data)
- Support for ISM330IS (id entry only)
Minor cleanups etc
* adi,adis
- Fix a deadlock on device instance specific mutex.
- Tidy up by calling unlocked form of __adis_initial_startup() in all
cases and dropping the locked version.
* adi,ad4130
- Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
- Fix a bug brought on by integer promotion of signed value to unsigned type.
- Add an spi_device_id table to allow module autoloading to work.
- Add support for reset pin.
* adi,ad7606_par
- devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
- Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
for ad7924.
* adi,ltc2983
- Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
unit.
* maxim,max11410
- Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
- Add fallback compatibles to dt-binding.
* renesas,rzg2l
- Document use for RZ/Five SoC.
* st,stm32-adc
- Improved calibration support with error logging and a debugfs
interface to read back the result.
* ti,adc128s052
- Fix an issue with missing data members in the adc128_of_match table that
meant all device were being handled as adc128s052 ADCs.
-----BEGIN PGP SIGNATURE-----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=AUOr
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new device support, cleanups etc for 6.2
Includes a few late breaking fixes for old issues.
Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().
New devices support
* adi,ad74115
- New driver for this complex input/output device with 16 bit ADCs,
14 bit DACs amongst other features.
- A few tidy ups / removal of unused data patches followed.
* adi,adf4377
- New driver for this dual output integer-N phased locked loop and VCO
chip.
* maxim,max30208
- New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
- Support for LSM6DS016IS (chip specific data)
- Support for ISM330IS (id entry only)
Minor cleanups etc
* adi,adis
- Fix a deadlock on device instance specific mutex.
- Tidy up by calling unlocked form of __adis_initial_startup() in all
cases and dropping the locked version.
* adi,ad4130
- Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
- Fix a bug brought on by integer promotion of signed value to unsigned type.
- Add an spi_device_id table to allow module autoloading to work.
- Add support for reset pin.
* adi,ad7606_par
- devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
- Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
for ad7924.
* adi,ltc2983
- Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
unit.
* maxim,max11410
- Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
- Add fallback compatibles to dt-binding.
* renesas,rzg2l
- Document use for RZ/Five SoC.
* st,stm32-adc
- Improved calibration support with error logging and a debugfs
interface to read back the result.
* ti,adc128s052
- Fix an issue with missing data members in the adc128_of_match table that
meant all device were being handled as adc128s052 ADCs.
* tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
iio: addac: ad74413r: fix blank line after declaration warning
iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
dt-bindings: iio: imu: st_lsm6dsx: add ism330is
iio: imu: st_lsm6dsx: add support to ISM330IS
iio: frequency: adf4377: add support for ADF4377
dt-bindings: iio: frequency: add adf4377 doc
dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
iio: adc128s052: add proper .data members in adc128_of_match table
iio: adc: stm32-adc: add debugfs to read raw calibration result
iio: adc: stm32-adc: improve calibration error log
iio: adc: stm32-adc: smart calibration support
iio: addac: ad74413r: add support for reset-gpio
dt-bindings: iio: ad74413r: add optional reset-gpios
iio: addac: ad74413r: add spi_device_id table
dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
iio: addac: add AD74115 driver
...
- Fix size of incorrectly increased from four to eight bytes
TOD field of crash dump save area. As result in case of
kdump NT_S390_TODPREG ELF notes section contains correct
value and "detected read beyond size of field" compiler
warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP)
module on initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and
Alexander Gordeev <agordeev@linux.ibm.com> as S390 memory
management maintainers. Also rename the S390 section to
S390 ARCHITECTURE to be a bit more precise.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCY4DkjxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8JrmAP928nAXDg4Gfctxka3tANgqu6uZ
SLQ79G717Hq+OHyYjwD9GHFrKjfaimYocAsyf9jPyKnnac4jVydA42CLdLbV2AI=
=Vl1I
-----END PGP SIGNATURE-----
Merge tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix size of incorrectly increased from four to eight bytes TOD field
of crash dump save area. As result in case of kdump NT_S390_TODPREG
ELF notes section contains correct value and "detected read beyond
size of field" compiler warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP) module on
initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander
Gordeev <agordeev@linux.ibm.com> as S390 memory management
maintainers. Also rename the S390 section to S390 ARCHITECTURE to be
a bit more precise.
* tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add S390 MM section
s390/crashdump: fix TOD programmable field size
s390/ap: fix memory leak in ap_init_qci_info()
There have been a lot of hotfixes this cycle, and this is quite a large
batch given how far we are into the -rc cycle. Presumably a reflection of
the unusually large amount of MM material which went into 6.1-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY4Bd6gAKCRDdBJ7gKXxA
jvX6AQCsG1ld24kMpdD+70XXUyC29g/6/jribgtZApHyDYjxSwD/WmLNpPlUPRax
WB071Y5w65vjSTUKvwU0OLGbHwyxgAw=
=swD5
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
-----BEGIN PGP SIGNATURE-----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=Fo38
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
iio: pressure: bmp280: convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
iio: adc: ad4130: depend on GPIOLIB
staging: iio: meter: replace ternary operator by if condition
iio: light: apds9960: Fix iio_event_spec structures
dt-bindings: iio: imu: Add inv_icm42600 documentation
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
iio: proximity: sx9360: Add a new ACPI hardware ID
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
...
Add myself as maintainer for the drivers/staging/media/atomisp code.
Link: https://lore.kernel.org/linux-media/20221123161447.15834-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are already addressed (the "all of the above" part) or can
be addressed later:
- The frame interval monitoring support is a software mechanism to
monitor the device for unexpected stalls, and should be part of the
V4L2 core if desired.
- Restricting the support media bus formats based on the SoC integration
only aims at reducing userspace confusion by not enumerating options
that are known not to be possible, it won't cause regressions if
handled later.
Move the description of the media bus format restriction TODO item to
the driver, drop the other TODO items, and move the driver out of
staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Atmel ISC driver is not compliant with media controller specification.
In order to evolve this driver, it has to move to media controller, to
support enhanced features and future products which embed it.
The move to media controller involves several changes which are
not backwards compatible with the current usability of the driver.
The best example is the way the format is propagated from the top video
driver /dev/videoX down to the sensor.
In a simple configuration sensor ==> isc , the isc just calls subdev s_fmt
and controls the sensor directly. This is achieved by having a lot of code
inside the driver that will query the subdev at probe time and make a list
of formats which are usable.
Basically the user has nothing to configure, as the isc will handle
everything at the top level. This is an easy way to capture, but also comes
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this will not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.
After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.
The new driver was added in the media subsystem with a different
symbol, with the conversion to media controller done, and new users
of the driver will be able to use all the new features.
This patch is merely a file move to staging, not affecting any of the
users.
The exported symbols had to be renamed to atmel_* to avoid duplication with
the new Microchip ISC driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Atmel ISC driver will be moved to staging to support old users that
are not using the media controller paradigm.
The ISC driver was converted to media controller in the public patch
series:
https://lore.kernel.org/lkml/20220503095127.48710-1-eugen.hristev@microchip.com/T/#m2c320fa8153c01379a1c35b1d90a00903949513a
However the conversion cannot be done directly as it would affect existing
users by breaking the old way of configuration for sama5d2 platforms.
After discussions with the media maintainers, the decision is to move
Atmel ISC to staging as-is, to keep the Kconfig symbols and the users
to the driver in staging. Thus, all the existing users of the non
media-controller paradigm will continue to be happy and use the old config
way.
The converted driver would support both sama5d2 and sama7g5 platforms with
media controller paradigm, but it requires userspace configuration of the
pipeline for all the pipeline modules.
In a simple configuration sensor ==> isc , the old isc driver used to call
subdev s_fmt and control the sensor directly.
This was achieved by having a lot of code inside the driver that was
querying the subdev at probe time and made a list of formats which are
usable.
Basically the user had nothing to configure, as the isc would handle
everything at the top level. This was an easy way to capture, but also came
with the drawback of lack of flexibility.
In a more complicated pipeline
sensor ==> controller 1 ==> controller 2 ==> isc
this would not be achievable, as controller 1 and controller 2 might be
media-controller configurable, and will not propagate the formats down to
the sensor.
The new driver Microchip ISC would solve all these problems and exposes pads
entities and links to userspace.
For the ease of tracking, the patches that convert to media controller come
on top of this patch that simply readds the driver to the new location under
the new Kconfig symbols.
To differentiate between the old driver and the new driver, I have renamed
the new driver to Microchip ISC, renaming the Kconfig symbols as well, and
all the mentions inside the driver.
The only thing that remains common is the file
include/linux/atmel-isc-media.h which is the ABI for the v4l2 custom
controls that the ISC exposes.
This file is used by both driver, so I kept it as-is.
To further avoid confusion all files have been renamed and all functions
named isc_* as well.
The exported symbols have been renamed with added microchip_ prefix, to
avoid symbol duplication with the old driver, and to avoid confusion.
Other than that, I have fixed small checkpatch issues when readding the
driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The Atmel ISC will be moved to staging thus the atmel platform will only
have the ISI driver.
The new media-controller converted ISC driver will be placed inside a
dedicated microchip platform directory.
It is then natural to have the microchip-csi2dc moved to this new platform
directory.
The next step is to add the Microchip ISC driver to the new platform
directory and reside together with the Microchip CSI2DC driver.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document administration details about CEC devices. This was formerly
documented in a cec-status.txt I kept on my website, but this really
belongs here as an admin guide.
Updated the original cec-status.txt, and converted it to .rst.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A virtual stateless device for stateless uAPI development purposes.
This tool's objective is to help the development and testing of
userspace applications that use the V4L2 stateless API to decode media.
A userspace implementation can use visl to run a decoding loop even when
no hardware is available or when the kernel uAPI for the codec has not
been upstreamed yet. This can reveal bugs at an early stage.
This driver can also trace the contents of the V4L2 controls submitted
to it. It can also dump the contents of the vb2 buffers through a
debugfs interface. This is in many ways similar to the tracing
infrastructure available for other popular encode/decode APIs out there
and can help develop a userspace application by using another (working)
one as a reference.
Note that no actual decoding of video frames is performed by visl. The
V4L2 test pattern generator is used to write various debug information
to the capture buffers instead.
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add myself as maintainer of the Allwinner A31 ISP media driver.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Given the substantial rework of the driver that I carried out and the
knowledge acquired about the hardware along the way, make myself a
maintainer of the sun6i-csi driver.
Also rename and move the entry while at it since the driver is not
specific to the V3s.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Alexander Gordeev and Gerald Schaefer are covering the whole s390 specific
memory management code. Reflect that by adding a new S390 MM section to
MAINTAINERS.
Also rename the S390 section to S390 ARCHITECTURE to be a bit more precise.
Acked-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmN6wAgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0EYH/3/RO90NbrFItraN
Lzr+d3VdbGjTu8xd1M+PRTmwh3zxLpB+Jwqr0T0A2gzL9B/D+AUPUJdrCVbv9DqS
FLJAVqoeV20dNBAHSffOOLPsgCZ+Eu+LzlNN7Iqde0e8cyZICFMNktitui84Xm/i
1NgFVgz9OZ6+aieYvUj3FrFq0p8GTIaC/oybDZrxYKcO8ZzKVMJ11swRw10wwq0g
qOOECvV3w7wlQ8upQZkzFxItKFc7EexZI6R4elXeGSJJ9Hlc092dv/zsKB9dwV+k
WcwkJrZRoezYXzgGBFxUcQtzi+ethjrPjuJuM1rYLUSIcfIW/0lkaSLgRoBu8D+I
1GfXkXs=
=gt6P
-----END PGP SIGNATURE-----
Backmerge tag 'v6.1-rc6' into drm-next
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add device tree bindings for the ADF4377 driver.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221115110041.71495-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD74115H is a single-channel, software-configurable, input and
output device for industrial control applications. The AD74115H
provides a wide range of use cases, integrated on a single chip.
These use cases include analog output, analog input, digital output,
digital input, resistance temperature detector (RTD), and thermocouple
measurement capability. The AD74115H also has an integrated HART modem.
A serial peripheral interface (SPI) is used to handle all communications
to the device, including communications with the HART modem. The digital
input and digital outputs can be accessed via the SPI or the
general-purpose input and output (GPIO) pins to support higher
speed data rates.
The device features a 16-bit, sigma-delta analog-to-digital converter
(ADC) and a 14-bit digital-to-analog converter (DAC).
The AD74115H contains a high accuracy 2.5 V on-chip reference that can
be used as the DAC and ADC reference.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221117080916.411766-3-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD74115H is a single-channel, software-configurable, input and
output device for industrial control applications. The AD74115H
provides a wide range of use cases, integrated on a single chip.
These use cases include analog output, analog input, digital output,
digital input, resistance temperature detector (RTD), and thermocouple
measurement capability. The AD74115H also has an integrated HART modem.
A serial peripheral interface (SPI) is used to handle all communications
to the device, including communications with the HART modem. The digital
input and digital outputs can be accessed via the SPI or the
general-purpose input and output (GPIO) pins to support higher
speed data rates.
The device features a 16-bit, sigma-delta analog-to-digital converter
(ADC) and a 14-bit digital-to-analog converter (DAC).
The AD74115H contains a high accuracy 2.5 V on-chip reference that can
be used as the DAC and ADC reference.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221117080916.411766-2-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.
The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221021104115.1812486-3-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.
The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221021104115.1812486-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Update the list of maintainers for the Nitro Enclaves project. Alex
(lexnv@) is not working at Amazon anymore and there will be the same
case for me starting with 2023.
Add a reference to the mailing list of the Nitro Enclaves development
team.
Signed-off-by: Andra Paraschiv <andraprs@amazon.com>
Acked-by: Alexandru Vasile <acvasile96@gmail.com>
Link: https://lore.kernel.org/r/20221108185912.15792-1-andraprs@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
========
Core
----
- Use mhi_soc_reset() API for resetting the modem in case of crash.
- Fixed a race condition between mhi_prepare_channel() and M0 state
transition. This can happen when mhi_prepare_channel() was updating the
read/write pointers and in parallel, the mhi_pm_m0_transition() rings
the doorbell of all channels without checking if it was enabled or not.
Fixed the race by ringing the doorbell only for the enabled channels in
mhi_pm_m0_transition().
pci_generic
-----------
- Added a secondary "AT" port using the OEM reserved channel of Telit FN990
modem.
- Added support for a SDX55 variant modem that exists in the Qualcomm
SC8280XP Compute Reference Design (CRD).
- Added support for a T99W175 variant modem manufactured by HP. The modem
uses the same configuration as of T99W175, but with a different VID:PID.
- Added local definitions for some VIDs (Thales and Quectel).
MAINTAINERS
===========
- Removed Hemant from MHI MAINTAINERS list since he left Qualcomm and
expressed his wish to not continue doing reviews for MHI patches.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmN7Ij4ACgkQVZ8R5v6R
zvU5ywf/c6+XqcYxfvGW6RRnHDLRZ3f3jZ+Dg/ykaLUbmlja29FXqhPoIoKEmyZe
6Q8XEv1hArWUD14FJTG6BQA6BKXCmQViXowWjfu5n7ZoS6L0e7lIbHQk/0hwvjri
apddvuLHU7Rg71/QdDFrKQijBzemVimCPBL/OHq/qBnyE+pu6bbIXqmimCymR9mc
5XsEfqHU1b+LqFX3mA2fp90mwrPakOWcwQ1mVd7G9OO3vSjlN0J6MT64QpzFo0Ad
q2glxjqOWedVJkFfevlmxY3wx/PUa2EBd2sT9ujZy6jHGOFgzz09Rjfwzf8ZWpfO
5g2lZ5fk+zN7Euhz2LaIuKIAH+FWJA==
=OdlK
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
"MHI Host:
Core:
- Use mhi_soc_reset() API for resetting the modem in case of crash.
- Fixed a race condition between mhi_prepare_channel() and M0 state
transition. This can happen when mhi_prepare_channel() was updating the
read/write pointers and in parallel, the mhi_pm_m0_transition() rings
the doorbell of all channels without checking if it was enabled or not.
Fixed the race by ringing the doorbell only for the enabled channels in
mhi_pm_m0_transition().
pci_generic:
- Added a secondary "AT" port using the OEM reserved channel of Telit FN990
modem.
- Added support for a SDX55 variant modem that exists in the Qualcomm
SC8280XP Compute Reference Design (CRD).
- Added support for a T99W175 variant modem manufactured by HP. The modem
uses the same configuration as of T99W175, but with a different VID:PID.
- Added local definitions for some VIDs (Thales and Quectel).
MAINTAINERS:
- Removed Hemant from MHI MAINTAINERS list since he left Qualcomm and
expressed his wish to not continue doing reviews for MHI patches."
* tag 'mhi-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Add definition for some VIDs
bus: mhi: host: pci_generic: Add HP variant of T99W175
bus: mhi: host: pci_generic: add support for sc8280xp-crd SDX55 variant
MAINTAINERS: Remove Hemant from MHI bus
bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990
bus: mhi: host: Fix race between channel preparation and M0 event
bus: mhi: host: Use mhi_soc_reset() API in place of register write
Commit fff61d4ccf ("dt-bindings: usb: usb251xb: Convert to YAML schema")
converts usb251xb.txt to usb251xb.yaml, but misses to adjust its reference
in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in MICROCHIP USB251XB DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221115103153.28502-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an introduction section for the accel subsystem. Most of the
relevant data is in the DRM documentation, so the introduction only
presents the why of the new subsystem, how are the compute accelerators
exposed to user-space and what changes need to be done in a standard
DRM driver to register it to the new accel subsystem.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Add a new Kconfig for the accel subsystem. The Kconfig currently
contains only the basic CONFIG_DRM_ACCEL option that will be used to
decide whether to compile the accel registration code. Therefore, the
kconfig option is defined as bool.
The accel code will be compiled as part of drm.ko and will be called
directly from the DRM core code. The reason we compile it as part of
drm.ko and not as a separate module is because of cyclic dependency
between drm.ko and the separate module (if it would have existed).
This is due to the fact that DRM core code calls accel functions and
vice-versa.
The accelerator devices will be exposed to the user space with a new,
dedicated major number - 261.
The accel init function registers the new major number as a char device
and create corresponding sysfs and debugfs root entries, similar to
what is done in DRM init function.
I added a new header called drm_accel.h to include/drm/, that will hold
the prototypes of the drm_accel.c functions. In case CONFIG_DRM_ACCEL
is set to 'N', that header will contain empty inline implementations of
those functions, to allow DRM core code to compile successfully
without dependency on CONFIG_DRM_ACCEL.
I Updated the MAINTAINERS file accordingly with the newly added folder
and I have taken the liberty to appropriate the dri-devel mailing list
and the dri-devel IRC channel for the accel subsystem.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Tested-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Neither Redpine Signals nor Silicon Labs seem to care about proper
maintenance of this driver, nor is there any help, documentation or
feedback on patches. The driver suffers from various problems and
subtle bugs. Mark it as orphaned.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221113185838.11643-1-marex@denx.de
Add DHCOR to the DH electronic i.MX6 board support to cover the
DHCOR i.MX6ULL SoM. It is a solderable SoM.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add binding documentation for the Amlogic G12 series DDR
performance monitor unit.
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221121021602.3306998-3-jiucheng.xu@amlogic.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a user guide to show how to use DDR PMU to
monitor DDR bandwidth on Amlogic G12 SoC
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Reviewed-by: Chris Healy <healych@amazon.com>
Link: https://lore.kernel.org/r/20221121021602.3306998-2-jiucheng.xu@amlogic.com
Signed-off-by: Will Deacon <will@kernel.org>
Add support for Amlogic Meson G12 Series SOC - DDR bandwidth PMU driver
framework and interfaces. The PMU can not only monitor the total DDR
bandwidth, but also individual IP module bandwidth.
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Tested-by: Chris Healy <healych@amazon.com>
Link: https://lore.kernel.org/r/20221121021602.3306998-1-jiucheng.xu@amlogic.com
Signed-off-by: Will Deacon <will@kernel.org>
Now Qi Liu has left HiSilicon and will no longer access to the
necessary hardware and document, remove the mail and thanks for
her's work.
While add the new maintainer Jonathan Cameron, He is skilled with
kernel and enough knowledge of the driver.
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Qi Liu <liuqi6124@gmail.com>
Link: https://lore.kernel.org/r/20221118065400.48836-1-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Commit c83227a5d0 ("irq/gpio: ixp4xx: Drop boardfile probe path") and
commit 155e4306107f ("clocksource/drivers/ixp4xx: Drop boardfile probe
path") remove files include/linux/irqchip/irq-ixp4xx.h and
include/linux/platform_data/timer-ixp4xx.h, but miss to adjust MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.
Remove file entries for those files in ARM/INTEL IXP4XX ARM ARCHITECTURE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221115123102.22732-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers.
- Increment the debian revision for deb-pkg builds
-----BEGIN PGP SIGNATURE-----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=KSm6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers
- Increment the debian revision for deb-pkg builds
* tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Restore .version auto-increment behaviour for Debian packages
MAINTAINERS: Add linux-kbuild's patchwork
MAINTAINERS: Remove Michal Marek from Kbuild maintainers
MAINTAINERS: Add Nathan and Nicolas to Kbuild reviewers
A fair amount of commits at this time due to ASoC PR merge, but all
look small and easy, mostly device-specific fixes spanned in various
drivers. Hopefully this should be the last big chunk for 6.1.
-----BEGIN PGP SIGNATURE-----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=FU82
-----END PGP SIGNATURE-----
Merge tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of commits at this time due to ASoC PR merge, but all
look small and easy, mostly device-specific fixes spanned in various
drivers. Hopefully this should be the last big chunk for 6.1"
* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
ASoC: stm32: dfsdm: manage cb buffers cleanup
ASoC: sof_es8336: reduce pop noise on speaker
ASoC: SOF: topology: No need to assign core ID if token parsing failed
ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
ASoC: rt5677: fix legacy dai naming
ASoC: rt5514: fix legacy dai naming
ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
ASoC: tas2780: Fix set_tdm_slot in case of single slot
ASoC: tas2764: Fix set_tdm_slot in case of single slot
ASoC: tas2770: Fix set_tdm_slot in case of single slot
ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
ASoC: core: Fix use-after-free in snd_soc_exit()
MAINTAINERS: update Tzung-Bi's email address
ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
...
Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.
Major changes:
ath11k
* support configuring channel dwell time during scan
rtw89
* new dynamic header firmware format support
* Wake-over-WLAN support
rtl8xxxu
* enable IEEE80211_HW_SUPPORT_FAST_XMIT
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmN3ZagRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuk/Af+M9IXyWmis9behHlz2U+4PJ/+JF8VYIck
6Xup+FM0O1w6aHhAL8gNOhLl62jpYB0Exou0YizInGvwjjQk2Gtuq60KshkbN2zL
YK3sbcS66PyE19gfIQKJTW/s+9aBncRuvEb6HTZx5iF96mVFPeBDPduUGQksGs5/
Egf03eAqzdcIIcejKG1SUn2o0fLJ6jds0VftAas+chKI2Z5ADQWPzugvU0vlvXVE
oq3ws7Sg0yGcwOOttFwaXMBPrjmCty5uc/ELMhjvSLAsKULXymjZkrU1m5tanhGu
N1MDqviwCK7PJC/wQ2xo7YKNY/1LUc0xbwfbEXQITfbbPyjOz+ynQQ==
=wKQZ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.2
Second set of patches for v6.2. Only driver patches this time, nothing
really special. Unused platform data support was removed from wl1251
and rtw89 got WoWLAN support.
Major changes:
ath11k
* support configuring channel dwell time during scan
rtw89
* new dynamic header firmware format support
* Wake-over-WLAN support
rtl8xxxu
* enable IEEE80211_HW_SUPPORT_FAST_XMIT
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Another set of devicetree and code changes for SoC platforms,
notably:
- DT schema warning fixes for i.MX
- Functional fixes for i.MX tqma8mqml-mba8mx USB and
i.MX8M OCOTP
- MAINTAINERS updates for Hisilicon and RISC-V, documenting
which RISC-V SoC specific patches will now get merged through
the SoC tree in the future.
- A code fix for at91 suspend, to work around broken hardware
- A devicetree fix for lan966x/pcb8291 LED support
- Lots of DT fixes for Qualcomm SoCs, mostly fixing minor
problems like incorrect register sizes and schema warnings.
One fix makes the UFS controller work on sc8280xp, and
six fixes address the same regulator problem in a variety
of platforms.
-----BEGIN PGP SIGNATURE-----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=Gyt8
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of devicetree and code changes for SoC platforms, notably:
- DT schema warning fixes for i.MX
- Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP
- MAINTAINERS updates for Hisilicon and RISC-V, documenting which
RISC-V SoC specific patches will now get merged through the SoC
tree in the future.
- A code fix for at91 suspend, to work around broken hardware
- A devicetree fix for lan966x/pcb8291 LED support
- Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems
like incorrect register sizes and schema warnings. One fix makes
the UFS controller work on sc8280xp, and six fixes address the same
regulator problem in a variety of platforms"
* tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
MAINTAINERS: repair Microchip corei2c driver entry
MAINTAINERS: add an entry for StarFive devicetrees
MAINTAINERS: generify the Microchip RISC-V entry name
MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees
MAINTAINERS: git://github.com -> https://github.com for HiSilicon
soc: imx8m: Enable OCOTP clock before reading the register
arm64: dts: imx93-pinfunc: drop execution permission
arm64: dts: imx8mn: Fix NAND controller size-cells
arm64: dts: imx8mm: Fix NAND controller size-cells
ARM: dts: imx7: Fix NAND controller size-cells
arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
ARM: dts: at91: sama7g5: fix signal name of pin PB2
arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
...
Almost all PCI bindings are controller bindings, so list them under the
PCI native host bridge and endpoint entry.
Link: https://lore.kernel.org/r/20221116215337.1032890-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Add the Loongson-2 pinctrl binding with DT schema format using
json-schema.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20221114024942.8111-2-zhuyinbo@loongson.cn
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.
The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.
v2:
* clarify the meaning of the nomodeset parameter (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de
Remove support for configuring the device via platform data because
there are no users of wl1251_platform_data left in the mainline kernel.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221109224250.2885119-2-dmitry.torokhov@gmail.com
The purpose of this patch is to provide a central location where all
HP related drivers are found. HP drivers will recide under
drivers/platform/x86/hp directory.
Introduce changes to Kconfig file to list all HP driver under "HP X86
Platform Specific Device Drivers" menu option. Additional changes
include update MAINTAINERS file to indicate hp related drivers new
path.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20221020201033.12790-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The dell-wmi-ddv driver adds support for reading
the current temperature and ePPID of ACPI batteries
on supported Dell machines.
Since the WMI interface used by this driver does not
do any input validation and thus cannot be used for probing,
the driver depends on the ACPI battery extension machanism
to discover batteries.
The driver also supports a debugfs interface for retrieving
buffers containing fan and thermal sensor information.
Since the meaing of the content of those buffers is currently
unknown, the interface is meant for reverse-engineering and
will likely be replaced with an hwmon interface once the
meaning has been understood.
The driver was tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927204521.601887-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add patchwork URL for Kconfig and Kbuild.
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove Michal Marek from Kbuild maintainers as there is no response from him
since October 2017. Add an entry for Michal in CREDITS.
Michal, thanks for maintaining Kbuild for almost eight years!
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As suggested by Nick, add Nathan and myself to Kbuild reviewers to share more
review responsibilities.
Signed-off-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The driver was renamed before application but the relevant change did
not propagate to the MAINTAINERS patch that was applied. Repair it.
CC: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221109212219.1598355-5-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Emil looks after the downstream StarFive stuff, and agreed to look after
the upstream ones too.
CC: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20221109212219.1598355-4-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These drivers work on our other FPGAs, for example the non-SoC PolarFire
connected to an FU-540 via chiplink. Make the entry a wee bit more
generic to match. While at it, remove the / from the heading so that it
matches other, neighbouring RISC-V entries.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221109212219.1598355-3-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Following some discussion both on & off list, I have volunteered to take
over maintaining the miscellaneous RISC-V devicetrees & soc drivers from
Palmer to ease his load.
So far only SiFive and Microchip have stuff in drivers/soc. For the
former, a SiFive entry exists with a dead GitHub repo - so remove that
to avoid confusion since the patches for drivers/soc & devicetrees will
be routed via my tree & other drivers go through their subsystem trees.
The Microchip directory only contains a RISC-V driver for now, but is
likely to contain drivers for other archs in the future. To that end,
change the PolarFire SoC entry to specifically mention the RISC-V driver
& the new directory level entry does not mention an architecture.
CC: Arnd Bergmann <arnd@arndb.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Palmer Dabbelt <palmer@dabbelt.com>
Link: https://lore.kernel.org/linux-riscv/mhng-e4210f56-fcc3-4db8-abdb-d43b3ebe695d@palmer-ri-x1c9a/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221109212219.1598355-2-conor@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=hwbL
-----END PGP SIGNATURE-----
Merge tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree into media_stage
Venus updates for v6.2
* tag 'tag-venus-for-v6.2' of git://linuxtv.org/svarbanov/media_tree:
venus: pm_helpers: Fix error check in vcodec_domains_get()
venus: firmware: Correct assertion of reset bit on remote processor
venus: firmware: Correct non-pix start and end addresses
venus: firmware: Correct reset bit
MAINTAINERS: Change email for Venus driver
MAINTAINERS: Add Vikash as VENUS video driver co-maintainer
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The global utilities block controls PCIE device enabling, alternate
function selection for multiplexed signals, consistency of HDA, USB
and PCIE, configuration of memory controller, rtc controller, lio
controller, and clock control.
This patch adds a driver to manage and access global utilities block
for LoongArch architecture Loongson-2 SoCs. Initially only reading SVR
and registering soc device are supported. Other guts accesses, such
as reading firmware configuration by default, should eventually be
added into this driver as well.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmNtZ+UTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXm67B/9qQtQbqYHoV6bJKqiAHgh3ZcS/V7sn
iYc5egO84YZSTtkbLKeCixYD7i8Ltz+GzC7XgOwkvYKUkjOcs9keomKxhUnGl6jf
Z7N66r8zBkR5LlkmmqTSMz90EDGz+WYj/4DaIcna70rSYp9aS4qbXr7AEv8CjGGl
VZzt95L0nDx6VWdiP8NoQyqMwFXwgy2L2D4x4bDVlG7zihwl6f7VBvt4MYrunpjo
P25ppR+yigAzhtO6LD19jq4MPSqQ2kyv/m5QR1mQvCqELc5ehn3OY70V5vWV7o4e
y/qtngfowKeP0TynkWp3aScKwDbD5zSMvDf5obMPSvgbJpfXRi4dM0uA
=SaCF
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix TSC MSR write for root partition (Anirudh Rayabharam)
- Fix definition of vector in pci-hyperv driver (Dexuan Cui)
- A few other misc patches
* tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Fix the definition of vector in hv_compose_msi_msg()
MAINTAINERS: remove sthemmin
x86/hyperv: fix invalid writes to MSRs during root partition kexec
clocksource/drivers/hyperv: add data structure for reference TSC MSR
Drivers: hv: fix repeated words in comments
x86/hyperv: Remove BUG_ON() for kmap_local_page()
A relatively large batch of fixes here but all device specific, plus an
update to MAINTAINERS. The summary print change to the STM32 driver is
fixing an issue where the driver could easily end up spamming the logs
with something that should be a debug message.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmNuPWkACgkQJNaLcl1U
h9BZJQf/Rj3kjTdwjccp+QXTrXQZVMjkXYUuLHbUokO2Mzy+U3mNCkJuvLJjAvSw
kqFBbJNYIm1jItRoqOkwlnNb0hw+QZAzBivi4DLPZJUwEeT6LxQdlYvepy6bEjCW
XJpTMFxDDaWkFUftl+tLZFN2VxHaVHEVTJ5aMu2ija0mjG1M5vrYtgVemyJ+v2/o
0nhXgnRe7Fq2+MqJazVzYs6ZxCvpIiU18a4WLD5BPGTIZhdfE0UXG+QGqWV4toHI
uZWnV+NWEKNzMGS/QdcHZYQHWlcQBR/g5kPFQFCl2D+aK9CmakHc6Bk99H6tRdLn
xYHjHafs6BwCG3eBfE/hxD8rsfTNmw==
=UfdB
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A relatively large batch of fixes here but all device specific, plus
an update to MAINTAINERS.
The summary print change to the STM32 driver is fixing an issue where
the driver could easily end up spamming the logs with something that
should be a debug message"
* tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amd: Fix SPI_SPD7 value
spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run
spi: meson-spicc: fix do_div build error on non-arm64
spi: intel: Use correct mask for flash and protected regions
spi: mediatek: Fix package division error
spi: tegra210-quad: Don't initialise DMA if not supported
MAINTAINERS: Update HiSilicon SFC Driver maintainer
spi: meson-spicc: move wait completion in driver to take bursts delay in account
spi: stm32: Print summary 'callbacks suppressed' message
Add a RDMA VF driver for Microsoft Azure Network Adapter (MANA).
Co-developed-by: Ajay Sharma <sharmaajay@microsoft.com>
Signed-off-by: Ajay Sharma <sharmaajay@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-13-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Update MEDIATEK ETHERNET driver maintainer file enty adding myself to
maintainers list
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
HINIC is marked orphan for 14 months from the commit "5cfe5109a1d7",
but there are lots of HINIC in use.
I have a SP582 NIC (hi1822 inside which is a kind of HINIC SOC),
and implement based on hinic driver, and if there are some patches
for HINIC, I can test and do some code review.
I'm active in linux contribution, if possible,
I want to take the hinic maintainership.
Add my email here to receive patches.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not expose register definitions, structures and helpers via a .h file
because there are used only by at_hdmac.c. Since there are no other users,
remove the ambiguity and move all the .h contents to the .c file.
One may notice some checkpatch warnings and errors with this move. The move
was done "as it was", checkpatch complaints can be fixed in a further
patch.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com
Link: https://lore.kernel.org/r/20221025090306.297886-28-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys
from memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg
to network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WPta
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
Last patch from Vivien was nearly 3 years ago and he has not reviewed or
responded to DSA patches since then, move to CREDITS.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221109231907.621678-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Long Li says:
====================
Introduce Microsoft Azure Network Adapter (MANA) RDMA driver [netdev prep]
The first 11 patches which modify the MANA Ethernet driver to support
RDMA driver.
* 'mana-shared-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
net: mana: Define data structures for protection domain and memory registration
net: mana: Define data structures for allocating doorbell page from GDMA
net: mana: Define and process GDMA response code GDMA_STATUS_MORE_ENTRIES
net: mana: Define max values for SGL entries
net: mana: Move header files to a common location
net: mana: Record port number in netdev
net: mana: Export Work Queue functions for use by RDMA driver
net: mana: Set the DMA device max segment size
net: mana: Handle vport sharing between devices
net: mana: Record the physical address for doorbell page region
net: mana: Add support for auxiliary device
====================
Link: https://lore.kernel.org/all/1667502990-2559-1-git-send-email-longli@linuxonhyperv.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add RISC-V architecture as part of ARM/Renesas architecture, as they have
the same maintainers, use the same development collaboration
infrastructure, and share many files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221028165921.94487-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In preparation to add MANA RDMA driver, move all the required header files
to a common location for use by both Ethernet and RDMA drivers.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1667502990-2559-8-git-send-email-longli@linuxonhyperv.com
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Commit 6ed27461c9c8 ("arm64: efi: Move efi-entry.S into the libstub source
directory") moves arch/arm64/kernel/efi-entry.S to
drivers/firmware/efi/libstub/arm64-entry.S, but misses to adjust the
MAINTAINERS file.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Adjust the file entry in EXTENSIBLE FIRMWARE INTERFACE (EFI) to this file
movement.
As the file drivers/firmware/efi/libstub/arm64-entry.S is already covered
by the entry drivers/firmware/efi/, simply remove the arm64 file entry.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The Faraday FOTG210 is a dual-mode OTG USB controller that can
act as host, peripheral or both. To be able to probe from one
hardware description and to follow the pattern of other dual-
mode controllers such as MUSB or MTU3 we need to collect the
two, currently completely separate drivers in the same
directory.
After this, users need to select the main symbol USB_FOTG210
and then each respective subdriver. We pave the road to
compile both drivers into the same kernel and select the
one we want to use at probe() time, and possibly add OTG
support in the end.
This patch doesn't do much more than create the new symbol
and collect the drivers in one place. We also add a comment
for the section of dual-mode controllers in the Kconfig
file so people can see what these selections are about.
Also add myself as maintainer as there has been little
response on my patches to these drivers.
Cc: Fabian Vogt <fabian@ritter-vogt.de>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221023144708.3596563-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Combine MT6797 pin controller document into MT6779 one. reg and
reg-names property constraints are set using conditionals.
A conditional is also used to make interrupt-related properties
required on the MT6779 pin controller only, since the MT6797
controller doesn't support interrupts (or not yet, at least).
drive-strength and slew-rate properties which weren't described
in the MT6779 document before are brought in from the MT6797 one.
Both pin controllers share a common driver core so they should
both support these properties.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221028153505.23741-5-y.oudjana@protonmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add myself and Christoph Hellwig as reviewers for vmalloc.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20221018181053.434508-8-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update GPU Scheduler maintainer email.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/508985/
* git://linuxtv.org/sailus/media_tree: (47 commits)
media: i2c: ov4689: code cleanup
media: ov9650: Drop platform data code path
media: ov7670: Drop unused include
media: ov2640: Drop legacy includes
media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
media: dt-bindings: add bindings for Toshiba TC358746
phy: dphy: add support to calculate the timing based on hs_clk_rate
phy: dphy: refactor get_default_config
v4l: subdev: Warn if disabling streaming failed, return success
dw9768: Enable low-power probe on ACPI
media: i2c: imx290: Replace GAIN control with ANALOGUE_GAIN
media: i2c: imx290: Add crop selection targets support
media: i2c: imx290: Factor out format retrieval to separate function
media: i2c: imx290: Move registers with fixed value to init array
media: i2c: imx290: Create controls for fwnode properties
media: i2c: imx290: Implement HBLANK and VBLANK controls
media: i2c: imx290: Split control initialization to separate function
media: i2c: imx290: Fix max gain value
media: i2c: imx290: Add exposure time control
media: i2c: imx290: Define more register macros
...
Use my new Linaro address in place of my SoMainline one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107092207.5832-1-konrad.dybcio@linaro.org
Add the new compatible for HiSilicon gpio controller driver.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch adds support for Himax hx83112b touchscreen devices. As there
are no publicly available data sheets for these devices, the
implementation is based on the driver of the downstream Android kernel
used in the Fairphone 3. This patch is a complete rewrite, though, and
the code bears no resemblence to the original implementation.
The driver has been tested on the aforementioned phone.
Signed-off-by: Job Noorman <job@noorman.info>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20221107105604.26541-3-job@noorman.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are not a lot of important fixes for the soc tree yet this
time, but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller nodes,
CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git URLs
-----BEGIN PGP SIGNATURE-----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=Apap
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
Commit cd0ab43ec9 ("dmaengine: remove iop-adma driver") removes the
driver's source code, but misses to remove the MAINTAINERS section.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Remove the INTEL IOP-ADMA DMA DRIVER section pointing to the removed
driver.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20221020082103.29218-1-lukas.bulwahn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node
-----BEGIN PGP SIGNATURE-----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=34Ef
-----END PGP SIGNATURE-----
Merge tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node"
* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
vsock: fix possible infinite sleep in vsock_connectible_wait_data()
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
ipv6: fix WARNING in ip6_route_net_exit_late()
bridge: Fix flushing of dynamic FDB entries
net, neigh: Fix null-ptr-deref in neigh_table_clear()
net/smc: Fix possible leaked pernet namespace in smc_init()
stmmac: dwmac-loongson: fix invalid mdio_node
ibmvnic: Free rwi on reset success
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
netfilter: ipset: enforce documented limit to prevent allocating huge memory
isdn: mISDN: netjet: fix wrong check of device registration
...
Add the new compatible for HiSilicon i2c.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Rename the serial port 8250_gsc.c driver to 8250_parisc.c and cleanup
how the device IDs of devices in a PA-RISC machine are shown at startup.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY2KHWQAKCRD3ErUQojoP
XwzoAQCOzXAVgz2XsZuNtAdap/Q/02kcCToTOPqJcvuaXbm87QEAwXGN8XWpdTli
n2Egvuq5T2LFMSq3ERqGOVj502hYfwo=
=UWoU
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This mostly handles oddities with the serial port 8250_gsc.c driver.
Although the name suggests it's just for serial ports on the GSC bus
(e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
PCI devices (e.g. on the SuperIO chip) as well.
Thus this renames the driver to 8250_parisc and fixes the config
dependencies.
The other change is a cleanup on how the device IDs of devices in a
PA-RISC machine are shown at startup"
* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid printing the hardware path twice
parisc: Export iosapic_serial_irq() symbol for serial port driver
MAINTAINERS: adjust entry after renaming parisc serial driver
parisc: Use signed char for hardware path in pdc.h
parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
Commit de67fa80c6 ("dt-bindings: memory-controllers: arm,pl353-smc:
Extend to support 'arm,pl354' SMC") renames the arm,pl353-smc.yaml
memory-controller dt-binding, but misses to adjust its reference in
MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221031110223.30203-1-lukas.bulwahn@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Start the process of translating kernel documentation to Spanish. Create
directory sp_SP/ instead of es_ES/ (diverging from format of prior
translated directories) since this directory should accept any dialects of
Spanish. Include an index and a disclaimer, following the approach of
prior translations. Add Carlos Bilbao as MAINTAINER of this effort.
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20221024145521.69465-2-carlos.bilbao@amd.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNcYawUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPMzwf/Uh1lO2Op6IJ3/no2gPfShc9bdqgM
LiCkzfJp9PQAuDl/hs44CiQHUlPEfeIsI/ns0euNj37TlnB3zKmm46mtiWhEefIH
rwcm/ngKgw3283pZEf8FeMTDfNexOaBg2ZNoODR7JQsU50tbToY4TNE2nNRgbdL5
SNmzOwox1rZIQHxEa2r/k2B/HdRbeCFUU82EjwFqaNzH1yhzBXMcokdSCmGCBMsE
3xfCzQ7uMkXw/rlkkG0be65+5dTNmhfiKQYGAQe4s7PycVPMD79D2EhCfbpvbK7t
EmgOXStmvtW6+ukqPATHbRVCDwW0VmiQv5IWOGbLB1Qdy5/REynJ5ObC8g==
=Hvro
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
KVM: x86: emulator: update the emulation mode after CR0 write
KVM: x86: emulator: update the emulation mode after rsm
KVM: x86: emulator: introduce emulator_recalc_and_set_mode
KVM: x86: emulator: em_sysexit should update ctxt->mode
KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
KVM: selftests: Add tests in xen_shinfo_test to detect lock races
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
KVM: x86: Exempt pending triple fault from event injection sanity check
MAINTAINERS: git://github -> https://github.com for kvm-riscv
KVM: debugfs: Return retval of simple_attr_open() if it fails
KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
KVM: x86: Mask off reserved bits in CPUID.8000001FH
KVM: x86: Mask off reserved bits in CPUID.8000001AH
KVM: x86: Mask off reserved bits in CPUID.80000008H
KVM: x86: Mask off reserved bits in CPUID.80000006H
KVM: x86: Mask off reserved bits in CPUID.80000001H
Changed maintainers for vnic driver, since Dany has new responsibilities.
Also added Nick Child as reviewer.
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Link: https://lore.kernel.org/r/20221028203509.4070154-1-ricklind@us.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a driver for the motorcomm yt8521 gigabit ethernet phy. We have verified
the driver on StarFive VisionFive development board, which is developed by
Shanghai StarFive Technology Co., Ltd.. On the board, yt8521 gigabit ethernet
phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and
wol(magic package).
Signed-off-by: Frank <Frank.Sae@motor-comm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mauro hasn't really been maintaining EDAC for a long while now. Make him
a reviewer instead.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220926180343.23346-1-bp@alien8.de
Convert the text STMIPID02 DT bindings to YAML DT format to permit
validation of DTs using this I2C CSI-2 to CPI bridge.
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220929145416.16336-1-marex@denx.de
Signed-off-by: Rob Herring <robh@kernel.org>
Here are a few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard
work he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't
relevant for 6.1-final, as it is a new feature and people are
still reviewing and modifying it.
All of these have been in the linux-next tree with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY16Evg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylP7ACbBFKioz4LgbVYYY5f12qJ3MfbfBYAn1EKSYUr
jgJxsPv1LeTTicOqGIy9
=Jks2
-----END PGP SIGNATURE-----
Merge tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"A few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard work
he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't relevant for
6.1-final, as it is a new feature and people are still reviewing
and modifying it.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Don't set IMI for no_interrupt
usb: dwc3: gadget: Stop processing more requests on IMI
Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
xhci: Remove device endpoints from bandwidth list when freeing the device
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
xhci: Add quirk to reset host back to default state at shutdown
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
usb: dwc3: st: Rely on child's compatible instead of name
usb: gadget: uvc: limit isoc_sg to super speed gadgets
usb: bdc: change state when port disconnected
usb: typec: ucsi: acpi: Implement resume callback
usb: typec: ucsi: Check the connection on resume
usb: gadget: aspeed: Fix probe regression
usb: gadget: uvc: fix sg handling during video encode
usb: gadget: uvc: fix sg handling in error case
usb: gadget: uvc: fix dropped frame after missed isoc
usb: dwc3: gadget: Don't delay End Transfer on delayed_status
usb: dwc3: Don't switch OTG -> peripheral if extcon is present
MAINTAINERS: Update maintainers for broadcom USB
MAINTAINERS: move USB gadget and phy entries under the main USB entry
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
-----BEGIN PGP SIGNATURE-----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=IbVz
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change myself to a maintainer
gpio: tegra: Convert to immutable irq chip
Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY1w/LAAKCRDdBJ7gKXxA
jovHAQDqY3TGAVQsvCBKdUqkp5nakZ7o7kK+mUGvsZ8Cgp5fwQD/Upsu93RZsTgm
oJfYW4W6eSVEKPu7oAY20xVwLvK6iQ0=
=z0Fn
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport"
* tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
mmap: fix remap_file_pages() regression
mm/shmem: ensure proper fallback if page faults
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
x86: fortify: kmsan: fix KMSAN fortify builds
x86: asm: make sure __put_user_size() evaluates pointer once
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
x86/purgatory: disable KMSAN instrumentation
mm: kmsan: export kmsan_copy_page_meta()
mm: migrate: fix return value if all subpages of THPs are migrated successfully
mm/uffd: fix vma check on userfault for wp
mm: prep_compound_tail() clear page->private
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
mm/page_isolation: fix clang deadcode warning
fs/ext4/super.c: remove unused `deprecated_msg'
ipc/msg.c: fix percpu_counter use after free
memory tier, sysfs: rename attribute "nodes" to "nodelist"
MAINTAINERS: git://github.com -> https://github.com for nilfs2
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
...
Hemant moved out of Qualcomm and expressed his wish to not continue doing
any reviews for MHI patches. So let's remove him from MAINTAINERS file.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* A fix for a build warning in the jump_label code.
* One of the git://github -> https://github cleanups, for the SiFive
drivers.
* A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term.
* A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains.
* A fix for a runtime warning in the /proc/cpuinfo code.
-----BEGIN PGP SIGNATURE-----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=In1r
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a build warning in the jump_label code
- One of the git://github -> https://github cleanups, for the SiFive
drivers
- A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term
- A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains
- A fix for a runtime warning in the /proc/cpuinfo code
* tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix /proc/cpuinfo cpumask warning
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
riscv: mm: add missing memcpy in kasan_init
MAINTAINERS: git://github.com -> https://github.com for sifive
riscv: jump_label: mark arguments as const to satisfy asm constraints
The "side effects" memmove() test accidentally found[1] a corner case in
the recent refactoring of the i386 assembly memmove(), but missed another
corner case. Instead of hoping to get lucky next time, implement much
more complete tests of memcpy() and memmove() -- especially the moving
window overlap for memmove() -- which catches all the issues encountered
and should catch anything new.
[1] https://lore.kernel.org/lkml/CAKwvOdkaKTa2aiA90VzFrChNQM6O_ro+b7VWs=op70jx-DKaXA@mail.gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Krzysztof Kozlowski