Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
According to Tegra210 TRM, the default value of TLB_ACTIVE_LINES
field of register MC_SMMU_TLB_CONFIG_0 is 0x30. So num_tlb_lines
should be 48 (0x30) rather than 32 (0x20).
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200917113155.13438-3-nicoleotsuka@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In function tegra210_emc_r21021_periodic_compensation when calculate
emc_cfg EMC_CFG_DRAM_CLKSTOP_PD is duplicated.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20200903021542.315195-1-yebin10@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Commit 63a613fdb1 ("memory: tegra: Add gr2d and gr3d to DRM IOMMU
group") added the GPU to the DRM IOMMU group, which doesn't make any
sense. This causes problems when Nouveau tries to attach to the SMMU
and causes it to fall back to using the DMA API.
Remove the GPU from the DRM groups to restore the old behaviour. The
GPU should always have its own IOMMU domain to make sure it can map
buffers into contiguous chunks (for big page support) without getting
in the way of mappings from the DRM group.
Cc: <stable@vger.kernel.org>
Fixes: 63a613fdb1 ("memory: tegra: Add gr2d and gr3d to DRM IOMMU group")
Reported-by: Matias Zuniga <matias.nicolas.zc@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200901153248.1831263-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
According to Tegra X1 (Tegra210) TRM, the APEW field is between
[23:16] so the shift bit for apew should be 16 accordingly.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20200818095121.13645-1-nicoleotsuka@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Ensure that the driver will bind against the Tegra132 instantiation of
the external memory controller. While the two are roughly the same from
a capability perspective, they do require some incompatible changes to
the programming sequences and therefore need separate compatible
strings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit a127e690b0 ("memory: tegra: Add support for the Tegra194 memory
controller") and commit 4e04b88633 ("memory: tegra: Only include
support for enabled SoCs") incorrectly added the KCONFIG variables
CONFIG_ARCH_TEGRA186_SOC and CONFIG_ARCH_TEGRA194_SOC to the Tegra EMC
driver. These KCONFIG variables do not exist and prevent the EMC driver
from being probed on Tegra186 and Tegra194. These KCONFIG variable
names are simply missing one underscore and so fix this by adding the
necessary underscore to the variable names.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The debugfs_create_dir() function never returns NULL and anyway the
correct behavior is to ignore errors in this situation. The
debugfs_create_file() will become a no-op if "emc->debugfs.root" is an
error pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The suspend/resume functions have no callers depending on
configuration, so they must be marked __maybe_unused to
avoid these harmless warnings:
drivers/memory/tegra/tegra186.c:1578:12: error: 'tegra186_mc_resume' defined but not used [-Werror=unused-function]
1578 | static int tegra186_mc_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~
drivers/memory/tegra/tegra186.c:1573:12: error: 'tegra186_mc_suspend' defined but not used [-Werror=unused-function]
1573 | static int tegra186_mc_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~
Fixes: 177602b006 ("memory: tegra: Add system sleep support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra EMC scaling support code is not a clock provider, but merely a
clock consumer, and thus does not need to include
<linux/clk-provider.h>.
Fixes: 0bf368c5b2cf ("memory: tegra: Add EMC scaling support code for Tegra210")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The call to tegra_bpmp_get() must be balanced by a call to
tegra_bpmp_put() in case of error, as already done in the remove
function.
Add an error handling path and corresponding goto.
Fixes: 52d15dd23f ("memory: tegra: Support DVFS on Tegra186 and later")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory clock-rate change could be running on a non-boot CPU, while the
boot CPU handles the EMC interrupt. This introduces an unnecessary latency
since boot CPU should handle the interrupt and then notify the sibling CPU
about clock-rate change completion. In some rare cases boot CPU could be
in uninterruptible state for a significant time (like in a case of KASAN +
NFS root), it could get to the point that completion timeouts before boot
CPU gets a chance to handle interrupt. The solution is to get rid of the
completion and replace it with interrupt-status polling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory clock-rate change could be running on a non-boot CPU, while the
boot CPU handles the EMC interrupt. This introduces an unnecessary latency
since boot CPU should handle the interrupt and then notify the sibling CPU
about clock-rate change completion. In some rare cases boot CPU could be
in uninterruptible state for a significant time (like in a case of KASAN +
NFS root), it could get to the point that completion timeouts before boot
CPU gets a chance to handle interrupt. The solution is to get rid of the
completion and replace it with interrupt-status polling.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Derated timings are used to ensure that the memory chips keep operating
correctly at high temperatures. This adds code to support polling of the
chip operating state when high temperatures are measured on the chip and
change the refresh mode accordingly. Under very high temperatures, the
driver will switch to the derated tables to ensure proper operation of
the memory chips.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch includes the sequence for clock tuning and the dynamic
training mechanism for the clock above 800MHz.
And historically there have been different sequences to change the EMC
clock. The sequence to be used is specified in the EMC table.
However, for the currently supported upstreaming platform, only the most
recent sequence is used. So only support that in this patch.
Based on the work of Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is the initial patch for Tegra210 EMC frequency scaling. It has the
code to program various aspects of the EMC that are standardized, but it
does not yet include the specific programming sequence needed for clock
scaling.
The driver is designed to support LPDDR4 SDRAM. Devices that use LPDDR4
need to perform training of the RAM before it can be used. Firmware will
perform this training during early boot and pass a table of supported
frequencies to the kernel via device tree.
For the frequencies above 800 MHz, periodic retraining is needed to
compensate for changes in timing. This periodic training will have to be
performed until the frequency drops back to or below 800 MHz.
This driver provides helpers used during this runtime retraining that
will be used by the sequence specific code in a follow-up patch.
Based on work by Peter De Schrijver <pdeschrijver@nvidia.com>.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Replace the symbolic permissions with octals in order to make them
readable.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 6b9acd9355 ("memory: tegra: Refashion EMC debugfs interface on Tegra124")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8cee32b400 ("memory: tegra: Implement EMC debugfs interface on Tegra30")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8209eefa3d ("memory: tegra: Implement EMC debugfs interface on Tegra20")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The code waits for auto calibration to be finished and not to be disabled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously there was a problem where a late handshake handling caused
a memory corruption, this problem was resolved by issuing calibration
command right after changing the timing, but looks like the solution
wasn't entirely correct since calibration interval could be disabled as
well. Now programming sequence is completed immediately after receiving
handshake from CaR, without potentially long delays and in accordance to
the TRM's programming guide.
Secondly, the TRM's programming guide suggests to flush EMC writes by
reading any *MC* register before doing CaR changes. This is also addressed
now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current code doesn't prevent race conditions of suspend/resume vs CCF.
Let's take exclusive control over the EMC clock during suspend in a way
that is free from race conditions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to Tegra X1 (Tegra210) TRM, the reset value of xusb_hostr
field (bit [7:0]) should be 0x7a. So this patch simply corrects it.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory and external memory controllers on Tegra194 are very similar
to their predecessors from Tegra186. Add the necessary SoC-specific data
to support the newer versions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory client tables can be fairly large and they can easily be
omitted if support for the corresponding SoC is not enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a Tegra186 (and later) EMC driver that reads the EMC DVFS tables
from BPMP and uses the EMC clock to change the external memory clock.
This currently only provides a debugfs interface to show the available
frequencies and set lower and upper limits of the allowed range. This
can be used for testing the various frequencies. The goal is to
eventually integrate this with the interconnect framework so that the
EMC frequency can be scaled based on demand from memory clients.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add system suspend/resume support for the memory controller found on
Tegra186 and later. This is required so that the SID registers can be
reprogrammed after their content was lost during system sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move programming of the memory client to SID mapping into a separate
function so that it can be reused from multiple call sites.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of hard-coding the memory client table, use per-SoC data in
preparation for adding support for other SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra20, Tegra124,
Tegra186 and Tegra194. Implement the same interface on Tegra30 to enable
testing of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra124, Tegra186
and Tegra194. Implement the same interface on Tegra20 to enable testing
of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current debugfs interface is only partially useful. While it allows
listing supported frequencies and testing individual clock rates, it is
limited in that it can't be used to restrict the range of frequencies
that the driver is allowed to set. This is something we may want to use
to test adaptive scaling once that's implemented.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Trying to suspend driver results in a crash if timings aren't available in
device-tree.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Fixes: e34212c75a ("memory: tegra: Introduce Tegra30 EMC driver")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Memory Controller registers definition is sparse and duplicated,
let's consolidate everything into a common place for consistency.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Timing control debug features should be disabled at a boot time, but you
never now and hence it's better to disable them explicitly because some of
those features are crucial for the driver to do a proper thing.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Introduce driver for the External Memory Controller (EMC) found on Tegra30
chips, it controls the external DRAM on the board. The purpose of this
driver is to program memory timing for external memory on the EMC clock
rate change.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Contrary to its wait_for_completion_timeout_interruptible() sibling, the
wait_for_completion_timeout() function does not return an error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Turned out that it could take over a millisecond under some circumstances,
like running on a very low CPU/memory frequency. TRM says that handshake
happens when there is a "safe" moment, but not explains exactly what that
moment is. Apparently at least memory should be idling and thus the low
frequency should be a reasonable cause for a longer handshake delay.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During boot print how many memory timings got the driver and what's the
RAM code. This is a very useful information when something is wrong with
boards memory timing.
Suggested-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The driver expects certain debug features to be disabled in order to
work properly. Let's disable them explicitly for consistency and to not
rely on a boot state.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The register polling code was gone, but the included header change was
missed. Fix it up for consistency.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now Tegra20 and Tegra30 EMC drivers should provide clock-rounding
functionality using the new Tegra clock driver API.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory frequency scaling will be managed by tegra20-devfreq driver
and PM QoS once all the prerequisite patches will get upstreamed.
The parent clock is now managed by the clock driver and we also should
assume that PLLM rate can't be changed on some devices (Galaxy Tab 10.1
for example). Altogether there is no point in touching of clock's rate
from the EMC driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All of the devices making up the Tegra DRM device want to share a single
IOMMU domain. Put them into a single group to allow them to do that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory controller on Tegra124 and later supports 34 or more address
bits. Advertise that by setting the DMA mask based on the number of the
address bits.
Signed-off-by: Thierry Reding <treding@nvidia.com>
